MediaWiki - User contributions [en]

Talk:Transformers (2023) issue 30

2026-03-13T17:40:10Z

Leia G: creating the discussion page

== I Think the Main Summary Is Wrong ==

In the main summary, it stated that the matrix chooses Elita over Optimus. I think that's a misinterpretation of the events on the page.

Looking at the sequence of events, optimus stops elita's fight, opens the matrix chamber and gives it to her, and then she becomes a prime. An insert panel has the characters reacting in shock before the choice is made. That doesn't read as it choosing her over him. That read as him voluntarily stepping down as prime and giving the role to her, in order to fight for earth. The line about a leader being Chosen to me is about Optimus choosing a successor, not The Matrix choosing.

Optimus doesn't seem shocked or by The Matrix's choice he doesn't seem dismayed or hurt.

--[[User:Leia G|Leia G]] ([[User talk:Leia G|talk]]) 13:40, 13 March 2026 (EDT)
----

Bumblebee (G1)/merchandise

2025-12-27T01:10:55Z

Leia G: corrected auldey symbols. they were previously marked as decepticons

{{suite}}

'''Bumblebee''' has a lot of merchandise.

==Happy Meal Toy==
[[File:1985 happymeal bumblebee.jpg|thumb]]
*'''Bumblebee''' (1985)

:Non-poseable, non-transforming figurines of Bumblebee and three of his Mini-Vehicle chums (Cliffjumper, [[Gears (G1)|Gears]], and [[Brawn (G1)/toys|Brawn]]) comprised the very first line of Transformers [[List of Transformers restaurant promotions|Happy Meal toys]], but alas, the figures did not see a full release, and were only test-marketed in St. Louis, Missouri. The two-tone figures were available in a variety of colour variations, with at least six different combinations for each of the four characters: Bumblebee is known to have been available in blue and red, red and black, green and black, blue and black, black and yellow, and black and red... yet not his traditional yellow and black!

::*''[http://tfwiki.net/~fortmax/artifacts/featuredart3.html More information on Happy Meal Bumblebee at the TF Artifacts List]''
{{-}}

==Transformers Milk Caramel==
[[File:Caramel bumblebee.jpg|thumb]]
*'''Bumble''' (1985)
:A soft rubber figurine—known in Japan as a ''keshigomu''— of Bumblebee was released as part of the first wave of [[Kabaya]]'s earliest [[candy toy]] line, ''[[Transformers Milk Caramel]]''. Based more on his toy than his animation model, Bumblebee came packaged with chocolate-covered caramel candies, and was available in various colours, including white, blue, sky blue, yellow, green, and orange.
{{-}}

==Transformers Choco==
*'''Bumble''' (1985)
:A small solid-color, transforming snap-together model kit of Bumblebee was released as part of Kabaya's ''[[Transformers Choco]]'' line of candy toys.
{{-}}

==Estrela==
[[File:Volks-JogoDosTransformers.jpg|thumb|250px]]
*'''Jogo dos Transformers''' (1985)
:A tiny generic yellow car representing "Volks" (Bumblebee per his original toy name in Brazil) was included as a pawn in [[Estrela]]'s ''[[Jogo dos Transformers]]'' board game. He is not directly named, simply being called the "carrinho amarelo" (little yellow car) in the game's instructions, but his identity is revealed as a pair of cards featuring art of his original toy in vehicle mode are also included. He comes with a small sticker that's placed on the bottom of the car representing his robot mode, thus allowing him to roughly "transform" by being placed vertically - a little bit like what [[Robot Powered Machines]] would do about a pair of decades later.

:This same car was recolored to represent [[Windcharger (G1)#Estrela|Camaro (AKA Windcharger)]], [[Cliffjumper (G1)/toys#Estrela|Carrera (AKA Cliffjumper)]], and [[Sedan (Robocar)|Sedan]] in the same board game.
{{-}}

==Decoy==
[[File:Decoy bumblebee.jpg|thumb|Fun fact, this was the last piece of Bumblebee merchandise we'd get up until the next decade and a half. Things sure changed...]]
*'''Cybertron Hero Collection 9''' (multi-pack, 1986)
*'''Defeat Dinosaurer Strategy Game''' (board game, 1986)
:Bumblebee was among the many characters rendered by [[TakaraTomy|Takara]] as part of their series of 1.5" ''keshigomu'' figurines. Like all the Autobots in the series, Bumblebee was molded in soft red rubber, and featured a number sculpted into his back that was the sum total of his [[Tech Spec]]s, for use in the various games that could be played with the figurines. Bumblebee was available as part of a nine-piece box set of Autobot figures, as a playing piece in the Defeat Dinosauruer Strategy Game and later, in a peach coloration randomly packed as part of various other box sets.

*'''Bumblebee''' (1987)
**''Decoy number:'' '''26'''

:The Bumblebee figurine was later brought over to [[Hasbro]] markets as part of the [[Decoy]] promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (26, in Bumblebee's case). Like all Autobot Decoys, he was a randomly-chosen pack-in available with the carded [[Throttlebot]]s, [[Aerialbot (G1)|Aerialbots]], [[Protectobot (G1)|Protectobots]] and [[Technobot (G1)|Technobots]].

::*''[http://www.tfu.info/1986/Autobot/Decoys/Bumblebee/bumblebee.htm More information on Decoy Bumblebee at TFU.info]''
{{-}}

==Super Collection Figure==
[[File:SCF Bumblebee.jpg|upright=1.66|thumb|"ACT NATURAL."]]
*'''Bumble''' (2001)
**''Act'': '''3'''
**''Accessories'': Stand

:A 2-inch PVC of Bumblebee with his best human friend [[Spike Witwicky (G1)#Super Collection Figure|Spike]] was released in the third "Act" of [[TakaraTomy|Takara]]'s ''[[Heroes of Cybertron (toyline)|Super Collection Figure]]'' series. He carries the tiny little pistol he had in the opening of "[[More than Meets the Eye, Part 1]]". The figure was available in both full color and clear plastic versions, one of each available in a standard case of twelve [[blindpacking|blindpacked]] figures.

: In two out of every ten cases, the color version of Bumblebee came packaged with the torso of the Act's collectible "build-a-figure" [[Fortress Maximus (G1)#Super Collection Figure|Fortress Maximus]]. This part could also be either full-color or clear-plastic, packed at an equal 1:1 ratio.

: In one out of every ten cases (that didn't have a Fortress Maximus part), the clear version of Bumblebee was replaced with the [[Optimus Prime (G1)/merchandise#SCFdamage|battle-damaged Optimus Prime]] "[[chase figure|Secret Figure]]".

::*''[http://tfu.info/2001/Cybertron/SCFBumble/bumble.htm More information on Super Collection Figure Bumble at TFU.info]''
::*''[http://tfu.info/2001/Cybertron/ClearBumble/bumble.htm More information on clear Super Collection Figure Bumble at TFU.info]''

{{-}}

==''Heroes of Cybertron''==
[[File:HOC Bumblebee.jpg|upright=1.66|thumb|Both of Spike's thumbs got stung by bees before the photo was taken.]]
*'''Autobot Espionage Team''' (2003)

:The Bumblebee and Spike figurines were later sold in the fourth wave of [[Hasbro]]'s ''[[Heroes of Cybertron (toyline)|Heroes of Cybertron]]'' line, but since Hasbro didn't have the [[trademark]] on Bumblebee's name at the time, the set was simply collectively named the "Autobot Espionage Team". This version of the duo was cast in clear-blue plastic then painted over, with Bumblebee's eyes and the back of his head unpainted to attempt a [[light-piping]] gimmick.

: The pair were sold on a blister card, packaged with a character card and the right leg of the wave's collectible [[Fortress Maximus (G1)#Heroes of Cybertron|Fortress Maximus]] "build-a-figure".

::*''[http://tfu.info/2002/Autobot/HoCBumblebee/bumblebee.htm More information on Heroes of Cybertron Bumblebee at TFU.info]''
{{-}}

==''MyClone''==
[[File:MyClone Bumblebee.jpg|thumb|Oh wow they managed to let the kid friendly character look like a fat, grumpy old man.]]
*'''Bumble''' (2003)
** ''Japanese ID number:'' '''MTF010'''
** ''Accessories:'' Yellow display stand
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

:Released in the second wave of the ''[[MyClone]]'' line of Transformers PVC figures, this [[super deformed]] Bumblebee comes with a hexagonal yellow display stand, which can link up with the identical stands included with other MyClone figures. His modular design allows his parts to be mixed and matched with those of any other MyClone figure.
{{-}}

==''Q-Robo Collection''==
[[File:Qrobo bumblebee.jpg|thumb]]
*'''Bumble''' (2003)

:A super-deformed PVC of Bumblebee was released as part of the''[[Q-Robo Collection Figure]]''. Like all the figures in the series, it was sold blindpacked in a plastic capsule, featured articulation in the neck and shoulders, and was also available in a translucent red color scheme.

::*''[http://snakas.web.fc2.com/figure/q_robo1.htm More information on the Q-Robo Collection at Autobase Aichi]''
{{-}}

==Generation 1 Figure-Collection==
[[File:Bottlecap bumblebee.JPG|thumb]]

*'''Bumble''' (2003)
**''Japanese ID number:'' '''C-4'''
**''Accessories:'' Display base

:At only one inch in height, this Bumblebee "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's Transformers [[Generation 1 Figure-Collection]]. The figure was rendered in a "retro" black and white color scheme, and came with a leaflet, personalized with cartoon screen captures.
::*''[http://snakas.web.fc2.com/misc_item/kabaya_bottle.htm More information on the Generation 1 collection at Autobase Aichi]''
{{-}}

==History Collection==
[[File:History collection bbee.jpg|thumb]]

*'''Bumble''' (2004)
**''Accessories:'' Display base

:Takara produced this PVC figurine of Bumblebee as part of their [[History Collection]] set. Despite its diminutive size, this two-piece full-color figure features articulated shoulders.

::*''[http://tfkenkon.com/collection/act234/ More information on the History Collection at TFKenkon.com]''
{{-}}

==Hard Hero==
[[File:Hardhero bumblebees.jpg|thumb|upright=1.67]]
*'''Bumblebee''' (mini-statue, 2004)

:Standing at seven inches tall, [[Hard Hero]]'s Bumblebee cold cast porcelain mini-statue was limited to 1500 pieces and could link up with the company's previous [[Optimus Prime (G1)/merchandise|Optimus Prime statue]] to form a small diorama. Notionally, he was supposed to be the "first in the Minibot series", though no more Minibot statues were produced.

*'''Bumblebee''' (metallic chrome exclusive, 2004)

:A metallic golden chrome version of Hard Hero's Bumblebee statue, in homage to the original toy's Generation 2 chrome redeco, was offered as an exclusive by Coalition Comics in December 2004, limited to only 250 pieces.
{{-}}

==Gummy Candy==
[[File:ClassicsGummies.jpg|thumb|He's Bumblelicious!]]
*'''Transformers Gummy Candy''' (2006)

:Large [[Gummy Candy|gummy candies]] resembling his ''Classics'' toy packaged in a blister bubble.
{{-}}

==''Titanium Series''==
[[File:TitaniumRM-Bumblebee.jpg|thumb|22 years and five Robot Points later, he finally gets a gun. Revenge time!]]
*'''Bumblebee''' (Robot Master, 2006)
**''Accessories:'' Gun, display stand

:''[[Titanium Series]]'' Bumblebee is a small, 3-inch mostly-die-cast-metal statue of the little guy in a design that's surprisingly close to the original toy, with two wheels on each arm, a plate behind his head and sculpted details on his legs that are also based on the original toy. The only part where the cartoon model is given a preference is the head, including the face.

:''Titanium'' Bumblebee has joints at the waist, neck and shoulders, plus a removable pistol. He even comes with a little Autobot-sigil display base.

:This sculpt would've been used to make [[Cliffjumper (G1)/toys|Cliffjumper]], but the ''Titanium'' line was canceled before that figure could be released.

::*''[http://tfu.info/2006/Autobot/TitBumblebee/bumblebee.htm More information on Titanium Bumblebee at TFU.info]''
{{-}}
{{anchor|Ti2pack}}
[[File:Titanium-Series-Optimus-Prime-and-Bumblebee-2pack.jpg|upright=1.11|thumb|"Umm...He did it!" "What?"]]
*'''Optimus Prime & Bumblebee''' (2-pack, 2007)
**''Accessories:'' Gun, display stand

:A Toys 'R' Us [[exclusive]] two-pack, this set features "Supermetal Finish" (read: shiny) versions of the "Robot Master" ''Titaniums'' Optimus Prime and Bumblebee.
{{-}}

==Palisades==
[[File:Palisades bumblebee.jpg|thumb]]
*'''Bumblebee''' (mini-statue, 2006)

:Initially intended to be an exclusive for [[BotCon 2005]], [[Palisades Toys]]' 4" Bumblebee mini-statue fell victim to a scheduling conflict and was instead released by NonStop Toys in 2006, with leftover stock also being allocated to Diamond Previews in some countries. This stock tended to have a cracked crotch, a common defect with this piece. One of the last four statues to come out of the Palisades Transformers range, Bumblebee was limited to 1000 pieces.
{{-}}

==Diamond Select==
[[File:Art asylum bumblebees.jpg|thumb|upright=1.67]]
*'''Bumblebee''' (statue, 2007)

:This six-inch tall mini-bust of Bumblebee was sculpted by [[Art Asylum]] and limited to 1000 pieces.

*'''Bumblebee Roto-Bank''' (money bank, 2009)

:Art Asylum also produced a Bumblebee money bank, equipped with poseable, rotating arms and head.
{{-}}

==''Robot Heroes''==
[[File:G1 RobotHeroes BumblebeeVsSoundwave.jpg|upright=1.66|thumb|I wiw punch Soundwave into obwivion.]]
*'''Bumblebee & Soundwave''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

:''[[Robot Heroes (toyline)|Robot Heroes]]'' Bumblebee is another piece of absolute adorableness. A soft-plastic figurine that combines the cartoon and toy elements of the original Bumblebee with a "super-deformed" style, he is jointed at the neck and shoulders. He came in a two-pack with [[Soundwave (G1)/merchandise#Robot Heroes|Soundwave]].

:This mold was also used to make ''Robot Heroes'' [[Cliffjumper (G1)/toys#Robot Heroes|Cliffjumper]], of course.

::*''[http://tfu.info/2007/Autobot/RHBumblebee/bumblebee.htm More information on Robot Heroes Bumblebee at TFU.info]''

{{anchor|RHBlindpack}}
*'''Bumblebee''' (Single-pack, 2008)

: In some countries outside of North America, Bumblebee was released individually in a blindpack with no notable changes.
{{--}}

==''Transformers'' (2007)==
[[File:Mov2007-toy Slumblebee.JPG|upright=1.66|thumb]]
*'''Slumblebee''' (2007)

:Slumblebee is, as his name suggests, a plush Bumblebee toy based on his original [[The Transformers (franchise)|Generation 1]] form. Obviously he has no problems with articulation and passes the drop test with flying colors. You can transform him into his car mode (which is totally '''''not''''' a Beetle, as far as Volkswagen can prove) by turning him inside out. Truly he is a new zenith of cuteness.

::*''[http://tfu.info/2007/Autobot/Slumblebee/bumblebee.htm More information on Slumblebee at TFU.info]''
{{-}}

==3D Battle-Card Game==
[[File:3DBattleCard ClassicBumblebee.jpg|thumb|upright=1.66]]
*'''Classic Bumblebee''' (2007)

:A 22-point character in the [[3D Battle-Card Game]]'s "Energon Wars" expansion, "Classic" Bumblebee "transforms" into a yellow sports coupe, based on his ''Classics'' design. He uses the same parts layout as [[Side Swipe (Armada)|Side Swipe]] and [[Blackjack (G1)|Blackjack]].
{{-}}

==Sota Toys==
*'''Transformers Chess Set''' (<s>2007</s>)
:Eight identical Bumblebee pieces were to be the Autobot-side Pawns on a [[Chess#Sota Toys|chess set]] based on Generation 1, but the set apparently never saw release.
{{canceledtoy}}
{{-}}

==Boss Coffee==
[[File:Boss coffee bumblebee.jpg|thumb]]
*'''Bumble''' (2008)

:A non-transforming PVC figure of Bumblebee was released as part of a promotion by [[Boss Coffee]]. The small figure was randomly included with single cans of the company's "Rainbow Mountain Blend" coffee, contained in a plastic capsule affixed to the top of can which then became a display base for the figurine once removed. Bumblebee features articulation at the shoulders and waist, and came with a small catalog leaflet that could be folded up and attached to the lid/base to form a diorama background for added display value.
{{-}}

==''Attacktix''==
[[File:AttacktixBumblebee.jpg|thumb|Well, if people are gonna keep drawing him carrying gigantic guns....]]
*'''Bumblebee''' (Booster, 200?)
**''Attacktix ID number'': '''TF06'''

:Part of the second-series ''Transformers [[Attacktix]]'' Boosters, Bumblebee is a "Rare" 10-point "Specialist" that fires a standard missile. His Special Power, "Infiltrate" allows Bumblebee, after being defeated and turning up white, to be placed anywhere on the opponents starting line. He also has an always-active power that lets him take a free turn if he defeats another "Specialist"-ranked piece with a higher point value than his own. Holy schneikies, he's a ''monster'' on the board.

{{canceledattacktix}}
{{-}}

==''Universe'' (2008)==
[[File:TFU08-toy BumblebeeSuperSoaker.jpg|thumb|Electric charger not included!]]
*'''Bumblebee Super Soaker''' (2009)

:The Bumblebee {{w|Super Soaker}} is a yellow and black redeco of Hasbro's earlier "Sneak Attack 4-Way" water gun. The gun has several nozzle settings that allow it to fire a stream or fan of water straight forward, or streams in four other directions to surprise people and "soak 'em sideways".
{{-}}

==''Mighty Muggs''==
[[File:MightyMuggs Bumblebee.jpg|thumb|Tubby lil' muggy all stuffed with <s>fluff</s> energon.]]
*'''Bumblebee''' (2009)

:[[Mighty Muggs]] Bumblebee is a [[Super deformed|super-deformed]], non-transformable PVC figure with swiveling arms and head. His mold is different from the standard template used by most ''Transformers'' Muggs, as it is extra short and has Bumblebee's trademark "horns". On the other hand, he doesn't come with any weapons.
{{-}}

{{anchor|2018mightymugg}}
[[File:MightyMuggs 2018 Bumblebee.jpg|thumb|upright=1.44|Smug little bug.]]
*'''Bumblebee''' ([[2018]])
**''ID number:'' '''03'''

: Heavily influenced by his [[evergreen]] design, this Bumblebee Mugg is part of the line's relaunch in 2018. This new mold features sculpted wings, and a unique helmet that changes Bee's expression when pressed. He has three different faces: smug, surprised, and silly.
{{-}}

==''Transformers Wacky Wobblers''==
[[File:WackyWobblers G1Bumblebee.jpg|thumb]]
*'''Bumblebee''' (2009)

:This Bumblebee {{w|bobblehead}} is part of the popular ''[[Wacky Wobblers]]'' line produced by {{w|Funko}}. Aside from the standard-issue big wobbling head, he also features arms that swivel at the shoulders. Bumblebee is affixed to a base with his name on it.
{{-}}

==Transformers x Mimobot==
[[File:Mimobot Bumblebee.jpg|thumb|upright=1.66]]
*'''Bumblebee Mimobot''' (Mimoco, 2012)
:Produced by [[Mimoco]] as part of their multi-brand line of designer USB "Mimobot" flash drives, this Bumblebee memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.
{{-}}

==''The Loyal Subjects''==
*'''Bumblebee''' (2013)
{{charstubtoys}}
{{anchor|The Loyal Subjects Cybertron}}
*'''Cybertron Bumblebee''' (2013)
{{charstubtoys}}
{{-}}

==''Thrilling 30''==
*'''Bumblebee''' (Collectible Figurine, 2014)
**''Series / Number:'' '''2 / #16'''
**''Accessories:'' Collector's base
:A super-deformed Bumblebee was released among the blindpacked [[Thrilling 30#Collectible Figurines|''Thrilling 30'' Collectible Figurines]] by [[Goldie Marketing]]. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

*'''Collectible Figurines''' (5-pack, 2014)
**''Series:'' '''2'''
**''Accessories:'' 5 collector's bases
:The same Bumblebee figurine was also available in a 5-pack alongside [[Shockwave (G1)/toys#Thrilling 30|Shockwave]], [[Ultra Magnus (G1)/merchandise#Thrilling 30|Ultra Magnus]], [[Grimlock (G1)/toys#Thrilling 30|Grimlock]] and [[Hot Rod (G1)/merchandise#Thrilling 30|Rodimus]].
{{-}}

==Leg Avenue==
{{anchor|LegAvenue}}
[[File:Leg_Avenue_Bumblebee.jpg|right|upright=.75|thumb|]]
:Costume and lingerie manufacturer Leg Avenue released an officially licenced Bumblebee costume along side ones for [Megatron (G1)/merchandise#LegAvenue|Megatron]] and [[Optimus Prime (G1)/merchandise#LegAvenue|Optimus Prime]].
{{-}}
==''Tiny Titans''==
[[File:TinyTitans_G1Bumblebee.jpg|thumb|]]
*'''Bumblebee''' (Tiny Titans, 2015)
**''Series'': '''2'''
**''Number'': '''11/12'''

: Part of the second assortment of ''[[Tiny Titans]]'' [[blindpacking|blindpacks]], this version of Bumblebee is a very small, soft-plastic figure of him in robot mode... cast in gray plastic with copious amounts of golden-yellow paint on him, more than most Tiny Titans get.

: He includes a collectible card that renders him in the [[Transformers: Robots in Disguise (2015 franchise)|2015 ''Robots in Disguise'']] styling. The card includes a scan-badge for the [[Transformers: Robots in Disguise (mobile game)|''Robots in Disguise'' mobile game]], which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.

: This wave saw fairly minimal release at "big box" retailers, but unlike other waves, was ''not'' picked up by drug stores and the like later, making them particularly hard to find.

{{-}}

{{-}}

==''Hikari Mark Sofubi''==
[[File:HikariMarkSofubi Bumbles.jpg|thumb|]]

Drawing from a number of franchises including Star Wars, Marvel and Godzilla, Funko released a line of 6.6 inch/17 centimetre tall deformed soft vinyl figures with limited articulation. Hikari, meaning ‘light’, came in a variety of colors and included a hand-numbered card of authenticity. Individual pieces ranged from 500 to 5000, depending on the character and variation. Eight versions of Bumblebee were released in 2014:

*'''Battle Ready Bumblebee''' (2014)
:A yellow distressed rendering of Bumblebee in the Sunbow-style, limited to 1000.

*'''Clear Glitter Bumblebee''' (2014)
:A yellow and black translucent rendering of Bumblebee in the Sunbow-style, limited to 3000.

*'''Dangerous Bumblebee''' (2014)
:A black with grey streaks rendering of Bumblebee in the Sunbow-style, limited to 600.

*'''Distressed Bumblebee''' (2014)
:A lighter yellow distressed rendering of Bumblebee in the Sunbow-style, limited to 1000.

*'''Grey Skull Bumblebee''' (2014)
:A black and white rendering of Bumblebee in the Sunbow-style, limited to 1000.

*'''Ice Bumblebee''' (2014)
:A blue and white two-tone translucent rendering of Bumblebee in the Sunbow-style, limited to 1000.

*'''Metallic Bumblebee''' (2014)
:A metallic yellow and black rendering of Bumblebee in the Sunbow-style, limited to 1000.

*'''24K Gold Bumblebee''' (2014)
:An all-gold rendering of Bumblebee in the Sunbow-style, limited to 600.

{{-}}

==''Mecha Nations''==
[[File:Mn07-bumblebee.jpg|thumb|150px]]
*'''Bumblebee''' (2015)
**''ID Number:'' '''MN07'''
**''Accessories:'' Alternate hands, gun, battle-damaged armor (left arm, chest, right foot, face).

:Created by [[Kids Logic]], this [[super deformed]] Bumblebee, with G1 "Beetle"-style appearance, stands 6" tall and is articulated, featuring a shiny metallic color scheme, replacement hands, LED light up eyes, weapon and Autobot insignias on his chest. He also includes alternate parts for his chest, right foot and a mangled left arm for that [[Transformers (film)|movie-inspired]] battle-damaged look. Bumblebee's deco, with more black than traditionally found on G1 Bumblebee, and included weapon also appear to draw from his [[Bumblebee (Movie)|live-action counterpart]].

{{-}}

==''Metal Earth''==
[[File:Metal Earth Bumblebee.jpg|thumb]]
*'''Bumblebee''' (2015)
**''ID number:'' '''MMS301'''
:''[[Metal Earth]]'' Bumblebee is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".
{{-}}

[[File:Metal Earth Gold Bumblebee.jpg|thumb]]
*'''Gold Bumblebee''' (2015?)
**''ID number:'' '''MMS301G'''
:''Metal Earth'' Gold Bumblebee is a redeco of the kit above. He most likely represents Goldbug, though he is not named as such.
{{-}}

[[File:Metal Earth Legends Bumblebee.jpg|thumb]]
*'''Bumblebee''' (Legends, 2019)
**''ID number:'' '''MEM052'''
:''Metal Earth Legends'' Bumblebee is a DIY 3D steel model kit in the shape of a super deformed version of the evergreen Bumblebee design. The kit's difficulty rating is given as "moderate".
{{-}}

==''Block Wars''==
*'''Bumblebee''' (2016)
**''Number:'' '''2'''

:Part of [[Kabaya]]'s ''[[Transformers Block Wars]]'' candy toy line, this Bumblebee kit is based on his [[Bumblebee (G1)/toys#Cyber Series|Cyber Series Commander toy]]. Molded entirely in yellow plastic with detailing from stickers, he transforms into a super car when finished and is armed with a large sword with interchangeable handles. He can also be taken apart and combined with ''Block Wars'' [[Optimus Prime (G1)/merchandise#Block Wars|Optimus Prime]], [[Megatron (G1)/merchandise#Block Wars|Megatron]] and [[Starscream (G1)/toys#Block Wars|Starscream]] in various configurations, the ones involving Bumblebee shown on the packaging being:

:*Giving Bumblebee Megatron's arms and Starscream's wings and arming him with Optimus Prime's spear.
:*Attaching Starscream's wings and Megatron's cannon to Bumblebee's vehicle mode, making him a flying death car.
:*Having Starscream wield Bumblebee's sword and use his car roof as a shield.
:*Combining all four into an unnamed combiner, with Bumblebee forming the arms.

{{-}}

==''Transformers Figure Collection''==
[[File:TF-Transformers-Figure-Collection-Bumblebee-Decoy.jpg|thumb]]
*'''Bumble''' (01–2016)

:Standing 42mm tall, ''Transformers Figure Collection'' Bumble is a non-poseable soft-rubber figure greatly based on a [[Decoy]] figure.
{{-}}

==My Busy Books==
[[File:TF-My-Busy-Books-Transformers-Bumblebee-figurine.jpg|upright=1.66|thumb]]
*'''Transformers: My Busy Book''' (2017)

:Available with the [[Transformers: My Busy Book|10-page board book]] and a box filled with 12 figurines & a playmat depicting a destructed city & Cybertron, this Bumblebee is a pair of small, PVC non-transforming figurines consists of his robot mode (in his evergreen design) and his yellow car alternate mode that is inspired by his [[Bumblebee (Movie)|live-action film counterpart]]'s Camaro Concept vehicle. Like most of the land-based vehicle figurines, his wheels do not roll.

:In terms of quality control, the figurines' paint applications can be...well, a ''wee bit but not almost entirely'' shoddy (notably the wheels, as seen in the photo on the right). If you're a collector who prefers to display them, you should resign yourself from buying it or try to [[customizing|customize]] the figures with better paint applications if you have the skills.

{{-}}

==Kidrobot==
[[File:Kidrobot GIJoe Enamel Pin Series.jpg|thumb|250px]]
===Enamel Pin Series===
*'''Bumblebee''' ([[November 3]], [[2017]])
:*''Rarity:'' 2 in 20
:Released by [[Kidrobot]] in their Enamel Pin Series, this is a flat, enamel pin badge of Bumblebee inspired by the art of [[Tom Scioli]]'s ''[[Transformers vs. G.I. Joe]]'', albeit with [[Super deformed|cutesy proportions]]. The pin series was [[Blindpacking|blindboxed]], with some pins being rarer than others.
{{--}}

===Vinyl Mini Series===
[[File:Kidrobot GI Joe Bumblebee mini.jpg|thumb|upright=1]]
*'''Bumblebee''' ([[November 14]], [[2017]])
:*''Rarity:'' 3 in 48
:The same character design was reused for the Vinyl Mini Series, with Bumblebee receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. He featured articulation in each shoulder.
{{--}}

===Vinyl Keychain Series===
[[File:Kidrobot GI Joe Bumblebee keychain.jpg|thumb|upright=1]]
*'''Bumblebee''' ([[December 1]], [[2017]])
:*''Rarity:'' 3 in 24
:Bumblebee was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation.
{{--}}

==Hauck==
[[File:Hauck Go Kart Bee.jpg|upright=1.66|thumb|In case a VW Beetle was too big for you.]]
*'''Bumblebee Go Kart''' (2017)
:Manufactured by [[Hauck toys]], the Bumblebee go-kart is a small, pedal-operated vehicle for kids aged 4-8 years old. Cast in the image of Bumblebee (even featuring his head sculpted on the front), the kart features an adjustable seat as well as a brake.

{{-}}

==Fidget Its==
[[File:Fidget its bumblebee.jpg|upright=1.66|thumb|The [[AllSpark|cube]] was merely a vessel; its power, its knowledge—can never be destroyed.]]
*'''Bumblebee''' (2017)

:Arriving a little late to the fidget toy craze, [[Fidget Its]] Bumblebee is a cube-shaped Bumblebee with rubber horns and (non-poseable) feet. He has five features to fidget with: button eyes, a larger and clickier button, a slidable "arm", a clicky dial, and a pressable rolling metal ball on his back.
{{-}}

==Bouncing Ball Heads==
[[File:BouncingBallHead Bumblebee.jpg|upright=1.22|thumb]]
*'''Bumblebee''' (2017)
:"Bouncing Ball Head" Bumblebee is a small, super deformed figurine with a removable head that doubles as a bouncy ball. An Autobot logo is tampographed on the back of his head and his name is written under his feet.

:He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique yellow color.

:Despite clearly representing Generation 1 characters, the collection is advertised as a 2015 ''[[Transformers: Robots in Disguise (2015 franchise)|Robots in Disguise]]'' product.
{{-}}

==''Playskool Friends''==
[[File:Playskool-Friends-TF-Bumblebee.jpg|upright=1.88|thumb]]
*'''Transformers Collector Pack''' (Canceled)

:Intended to be released as part of the 7-pack for the Playskool Friends lineup, this Bumblebee is a very adorable non-transforming figurine. He comes packed with Optimus Prime, Arcee, and 4 Rescue Bots: Heatwave, Chase, Boulder and Blades.

:Given the inclusion of the four Rescue Bots, it was ''probably'' unclear if this Bumblebee is mean to represent his ''Generation 1'' counterpart or his ''[[Bumblebee (WFC)|Aligned]]'' counterpart.
{{canceledtoy}}
{{-}}
==Forever Clever==
{{anchor|Jumbochalk}}
*'''4 Pack Jumbo Chalk Set''' (2018)
:A chalk holder featuring Bumblebee. Bundled with chalk holders of [[Megatron (G1)/merchandise#Jumbochalk|Megatron]], [[Optimus Prime (G1)/merchandise#Jumbochalk|Optimus Prime]] and [[Soundwave (G1)/merchandise#Jumbochalk|Soundwave]], and 4 pieces of appropriately colored chalk.
{{anchor|shapechalk}}
*'''5 Pack Shaped Chalk''' (2019)
:A piece of yellow chalk formed into the shape of Bumblebee. Bundled with [[Megatron (G1)/merchandise#shapechalk|Megatron]], [[Optimus Prime (G1)/merchandise#shapechalk|Optimus Prime]], [[Starscream (G1)/merchandise#shapechalk|Starscream]] and [[Windblade (G1)#shapechalk|Windblade]].
{{anchor|WallWalker}}
*'''Wall Walkers Bumblebee''' (2018)
:Exclusively released in [[Blindpacking|blind bags]] by [[Forever Clever]], ''Wall Walkers'' Bumblebee has suction cups on its hands and feet so it can stick to walls. All its details are printed on, and besides its colors and printing, it is identical to the other Wall Walkers toys.
{{anchor|MiniWalker}}
[[File:MysteryMiniWalkers.jpg|upright=1|thumb]]
*'''Mystery Mini Walkers Bumblebee''' (2021)
:Exclusively available in blind bags, ''Mystery Mini Walkers'' Bumblebee is an eraser-like figure with movable arms and legs and printed-on details.
{{-}}
{{anchor|PBRbumblebee}}
[[File:TF Authentics 2023 Pull-Back Racers Bumblebee.jpg|upright=1|thumb|Dap me up, Prime!]]
*'''Pull-Back Racers Bumblebee''' ([[2023]])
:Released in the ''Pull-Back Racers'' subline of ''Authentics'', this toy is a non-transforming rendition of Bumblebee in a super-deformed rendition of his vehicle mode, albeit with his robot mode head and left arm sticking out of it. As the title suggests, this toy has a pull-back motor that will propel the toy forwards after being pulled back considerably enough.
{{-}}
{{anchor|ClipCharms}}
[[File:ForeverCleverClipCharms.jpg|upright=1|thumb]]
*'''Clip Charms Bumblebee''' (2024)
:Released in blind bags, ''Clip Charms'' features a keychain design with half of Bumblebee's face, with his name written beside it.
{{-}}
{{anchor|KeyBlasters}}
*'''Key Blasters''' (2024)
:A toy car released as part of the ''Key Blasters'' series features Bumblebee on its sides and hood, with a hexagon design. A key is included. When it is inserted into the car, pushing the button on the key will propel the car forward. It was sold in a two-pack with a [[Soundwave (G1)/merchandise#KeyBlasters|Soundwave]] themed car.

===Squeezelings===
[[File:Series1SqueezelingsBumblebee.jpg|thumb]]
*'''Bumblebee''' (Series 1, 2022)
:''[[Squeezelings]]'' Bumblebee is a [[super deformed]], non-posable figure made of soft plastic and holding a blaster, released by [[Forever Clever]]. He was released in [[blindpacking|blind bags]] and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

{{-}}{{anchor|SqueezelingsBlackout}}
*'''Blackout Color Mode Bumblebee''' (2022)
:A [[black redeco]] of the previous Bumblebee figure, resembling the many Stealth Bumblebee redecos his [[Bumblebee (Movie)/toys|movie self]] has received over the years. It was exclusive to an 8-figure gift set, featuring [[Optimus Prime (G1)/merchandise#Squeezelings|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings|Bumblebee]], [[Starscream (G1)/merchandise#Squeezelings|Starscream]], [[Megatron (G1)/merchandise#Squeezelings|Megatron]], and Blackout Color Mode versions of the three other characters.

{{-}}{{anchor|Squeezelings2}}
*'''Bumblebee''' (Series 2, 2023)

:A figure of Bumblebee in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongside [[Optimus Prime (G1)/merchandise#Squeezelings2|Optimus Prime]], [[Megatron (G1)/merchandise#Squeezelings2|Megatron]] and [[Optimus Primal (BW)/toys#Squeezelings|Optimus Primal]], in blind bags, or on blister card individually. It was rereleased as part of the Squeezelings Sidekicks line, along with a copy of [[The Hanging Sword]], the first issue of the [[The Transformers: Bumblebee]] miniseries.

==''Uglydolls''==
[[File:Uglydolls plush collab.jpg|upright=1.66|thumb]]
*'''Ice-Bat as Bumblebee''' (2018)
:A collaboration with ''[[Uglydolls]]'' for the 2018 [[San Diego Comic-Con]], the character Ice-Bat is dressed as Bumblebee. He is a limited run exclusive plush, along with Ox as [[Optimus Prime (G1)/merchandise|Optimus Prime]].

{{-}}

==''Keshi Surprise''==
*'''Autobots''' (2018)

:The ''[[Keshi Surprise]]'' series by [[Super7]] consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980s [[Decoy]]s. These [[Blindpacking|blind-packed]] figures were sold individually or in cases depicting only their faction. Bumblebee was available in red, yellow, blue, and purple, and included a foil trading card / sticker.
{{-}}

==McDonald's==
[[File:2018-McD-Authentics-Bumblebee-Robot.jpg|upright=1.22|thumb]]
*'''Bumblebee''' (Happy Meal Toy, 2018)
:Released as part of the [[McDonald's]] June 2018 Happy Meal Toys along with [[My Little Pony]], McDonald's Bumblebee is a [[super deformed]], non-poseable toy, except at the right arm, which is a little missile launcher. It's pretty big. That's it.

:The toy was available in South Korea, Italy, Russia, and Malaysia. This toy was rereleased in the US as [[Bumblebee (Movie)/merchandise#McDonald's 2|Bumblebee]] for the ''[[Bumblebee (franchise)|Bumblebee]]'' promotion.

{{-}}{{anchor|McDonaldsCar}}
[[File:2018-McD-Authentics-Bumblebee-Racer.jpg|upright=1.22|thumb]]
*'''Bumblebee Racer''' (Happy Meal Toy, 2018)
:Part of the same Happy Meal collection as the toy above, this toy represents Bumblebee in his car mode with a pull-back motor. It was also rereleased as [[Bumblebee (Movie)/merchandise#McDonaldsCar|Bumblebee Racer]] for the ''Bumblebee'' promotion.

{{-}}

==''Transformers Trading Card Game''==
[[File:W1BumblebeeBW.jpg|thumb|upright=1.66]]
*'''Bumblebee, Brave Warrior''' (2018)
**'''Wave 1S: Starter Set'''
**''Rarity: '''''RT'''
**''Card Number:''''' T01/T04'''
**''Stars: ''6
:Bumblebee, Brave Warrior is one of four double-sided character cards available in the ''[[Transformers Trading Card Game]]'' Starter Set.

:The artwork for the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile game, and is based on the '''Legacy of Bumblebee''' redeco of the ''[[Transformers: Classics|Classics]]'' Bumblebee toy.
{{-}}
[[File:BumblebeeCS.jpg|thumb|upright=1.66]]
*'''Bumblebee, Courageous Scout''' (2018)
**'''Wave 1'''
**''Rarity:'' '''CT'''
**''Card Number:''''' T08/T40'''
**''Stars: ''9
:Bumblebee, Courageous Scout is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The artwork for the card reuses different artwork from the ''Transformers Legends'' mobile game, and is based on the '''Legacy of Bumblebee''' redeco of the ''Classics'' Bumblebee toy.
{{-}}
[[File:W1BumblebeeLW.jpg|thumb|upright=1.66]]
*'''Bumblebee, Legendary Warrior''' (2018)
**'''Wave 1'''
**''Rarity:'' '''SRT'''
**''Card Number:''''' T09/T40'''
**''Stars: ''10
:Bumblebee, Legendary Warrior is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The artwork for the card reuses more artwork from the ''Transformers Legends'' mobile game, and is based on the '''Legacy of Bumblebee''' redeco of the ''Classics'' Bumblebee toy.
{{-}}
[[File:W2Bumblebee.jpg|thumb|upright=1.66]]
*'''Bumblebee, Trusted Lieutenant''' (2019)
**'''Wave 2: Rise of the Combiners'''
**''Rarity: '''''CT'''
**''Card Number: '''''T14/T46'''
**''Stars: ''10

:Bumblebee, Trusted Lieutenant is one of forty-six character cards released in Wave 2 of the ''[[Transformers Trading Card Game]]'', Rise of the Combiners.

:The artwork for the card features another set of reused artwork from the ''Transformers Legends'' mobile game, and is once again based on the '''Legacy of Bumblebee''' redeco of the ''Classics'' Bumblebee toy.
{{-}}
[[File:W2SBumblebeeLLMD.jpg|thumb|upright=1.66]]
*'''Bumblebee, Least Likely, Most Dangerous''' (2019)
**'''Wave 2S: Bumblebee vs. Megatron Starter Set'''
**''Rarity: '''''RT'''
**''Card Number: '''''T01/T04'''
**''Stars: ''7

:Bumblebee, Least Likely, Most Dangerous was released as part of the ''Transformers Trading Card Game's'' Bumblebee vs. Megatron Starter Set. The card was packaged alongside [[Megatron (G1)|Megatron]], Cybertronian Tyrant, [[Starscream (G1)|Starscream]], Decepticon Lieutenant, [[Windblade (G1)|Windblade]], Defender of Truth, and a 40 card ready-to-play deck of Battle Cards.

:The line-art for the card was done by [[Dan Khanna]], and like the other Bumblebee cards in the Transformers TCG is based on the '''Legacy of Bumblebee''' Classics Bumblebee toy.
{{-}}
*'''Bumblebee, Trusted Lieutenant''' (2019)
**'''Wave 2P'''
**''Rarity: '''''CT'''
**''Card Number: '''''P5/2019'''
**''Stars: ''10
::A reprint of Bumblebee, Trusted Lieutenant was made available as an in-store play promo card for the release of Wave 3: War for Cybertron: Siege I. The card is identical to the original release, printed with gold-foil on the Robot Mode side.
{{-}}
[[File:EEBumblebee.jpg|thumb|upright=1.66]]
*'''Bumblebee, Legendary Warrior''' (2019)
**'''Wave 1: Energon Edition'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T01/T06'''
**''Stars: ''10

:Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Bumblebee, Legendary Warrior. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art by [[Ken Christiansen]]

{{-}}

==Flame Toys==
[[File:FlameToys-FuraiModel-04-Bumblebee.jpg|upright=1.66|thumb]]
===Furai Model===
*'''Bumblebee''' (May 2019)
**''Number:'' '''04'''
**''Accessories'': Gun, Heli-pack, Hammer
{{toydesigner|[[Akira Amemiya]] (concept artist)}}

:Bumblebee is released as part of the ''Furai Model'' line of articulated {{w|Gundam model|Gunpla}}-based model kits from [[Flame Toys]]. Bumblebee also comes with a gun, a heli-pack inspired by his Action Master toy, and a hammer based on his live-action film counterpart's weapon seen in ''The Last Knight''. Using parts made of hard ABS plastic and some polycaps, Bumblebee is approximately Deluxe-sized in height.

:If one chooses, the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers like ''Gundam Markers'' can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.

:Though not meant to be fully clipped together, Bumblebee's torso, feet, and wheel parts can be rearranged into a Volkswagen Beetle-like alt mode.<ref>https://twitter.com/flametoys_staff/status/1129266947550355456</ref>
{{-}}

*'''Bumblebee (Red ver.)''' (<s>2020</s> 20??)
A red version of the Bumblebee figure was revealed in a Flame Toys product catalog, to be released in 2020. However, he has not been released yet, and was also not advertised as Cliffjumper, and simply appeared to be a red Bumblebee.
{{uncertaintoy}}
{{-}}

==''ReAction''==
[[File:TF-ReAction-figure-Bumblebee.jpg|thumb|250px]]
*'''Bumblebee''' (2020, 2024)
**''Accessories'': Blaster pistol

: Released in the first wave of [[Super7]]'s line of multi-property 3.75-inch action figures, ''[[Super7#ReAction|ReAction]]'' Bumblebee is a non-converting "retro-style" action figure with 5 points of articulation, based on his appearance in the original cartoon. He comes with a small blaster which can only be held in his right hand. He has holes on the bottom of his feet for mounting him on some manner of figure stand.

: As with all releases in the ''ReAction'' toyline, Bumblebee comes packaged in a small cardback that emulates the nostalgic packaging style of [[Kenner]] ''[[Star Wars (franchise)|Star Wars]]'' action figures of the late 1970s and early '80s, the figure format the entire line is based around.

: In late 2024, this figure was reissued with no obvious changes, now in a [[blindpacking|blindpacked]] box assortment.

{{-}}{{anchor|ReActionGold}}
[[File:TF-ReAction-figure-Gold-Armor-Bumblebee.jpg|thumb|250px]]
*'''Gold Armor Bumblebee''' (2020)
**''Accessories'': Blaster pistol

:This is a [[Target]]-exclusive redeco of ''ReAction'' Bumblebee, now in ''Generation 2''-inspired metallic gold and black. The gold parts of the card-art are printed with a ''very'' reflective metallic-gold, which often ends up looking black in photography if there's not direct light on it (as seen in the stock imagery at right).

:This figure was something of a [[shelfwarmer|pegwarmer]], eventually getting clearanced out and going from cluttering Target pegs to cluttering [[eBay]] "ReAction" searches.
{{-}}

==Jada Toys==
===''Metalfigs''===
[[File:JadaMetalfigsG1Bumblebee.jpg|upright=1.44|thumb]]
*'''Bumblebee''' (4" Die Cast Figure, 2020)
**''Accessories'': Big blaster, small blaster
:Released by [[Jada Toys]], ''Metalfigs'' Bumblebee is a 4 inches tall non-transforming super deformed die-cast figure with three points of articulation and [[Light-emitting diode|light-up eyes]]. His design blends elements from both his original toy and cartoon appearance.

:He comes with two different blasters as accessories.

{{-}}{{anchor|DioramaScene}}
[[File:JadaMetalfigsG1DioramaScene.jpg|upright=1.44|thumb]]
*'''Diorama Scene''' (2 3/4" Die Cast Figure 4-pack, 2020)
**''Accessories'': Display backdrop
:A static die-cast figurine of Bumblebee measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongside [[Optimus Prime (G1)/merchandise#DioramaScene|Optimus Prime]], [[Starscream (G1)/merchandise#Jada Toys|Starscream]] and [[Megatron (G1)/merchandise#Jada Toys|Megatron]].

:The packaging backdrop can be used as an additional display piece for the set.

{{-}}{{anchor|Metalfigs4pack}}
*'''Optimus Prime / Bumblebee / Optimus Primal / Megatron''' (2 3/4" Die Cast Figure 4-pack, 2022)
:This static Bumblebee figurine is directly designed after the 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongside [[Optimus Prime (G1)/merchandise#Metalfigs4pack|Optimus Prime]], [[Optimus Primal (BW)/toys#Metalfigs|Optimus Primal]] and [[Megatron (G1)/merchandise#Metalfigs4pack|Megatron]].

{{-}}{{anchor|Metalfigssingle}}
*'''Bumblebee''' (2 3/4" Die Cast Figure, 2023)
:The same super deformed Bumblebee from the 4-pack above is also available in individual packaging.
{{-}}

===''Nano Hollywood Rides''===
[[File:JadaNanoHollywoodRidesG13pack.jpg|upright=1.44|thumb]]
*'''Starscream / Volkswagen Beetle Bumblebee / Optimus Prime''' (1.65" Die Cast Vehicle 3-pack, 2020)
:''Nano Hollywood Rides'' Bumblebee is a small non-transforming die-cast licensed Volkswagen Beetle measuring approximately 1.65 inches long. He was released in a 3-pack alongside [[Starscream (G1)/merchandise#Nano Hollywood Rides|Starscream]] and [[Optimus Prime (G1)/merchandise#Nano Hollywood Rides|Optimus Prime]]. Unfortunately, he doesn't feature a sculpted robot mode underneath like most other Jada vehicles do.

{{-}}

===''Nano Metalfigs''===
[[File:JadaNanoMetalfigsG1-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 1 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:''Nano Metalfigs'' Series 1 Bumblebee is an incredibly small die-cast figurine molded with his hands on his waist. He has a little base attached to his feet for balancing reasons.

:He comes in an impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]]. This mold was later redecoed as Series 2 [[Cliffjumper (G1)/toys#NanoMetalfigs2|Cliffjumper]].

{{-}}{{anchor|NanoMetalfigs2}}
[[File:JadaNanoMetalfigsSeries2G1BW-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 2 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:A second ''Nano Metalfigs'' Bumblebee was released in Series 2, this time a redeco of Series 1 [[Cliffjumper (G1)/toys#Jada Toys|Cliffjumper]] who is doing a bit more of an action pose.

:He comes in ''another'' impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{-}}{{anchor|NanoMetalfigs3}}
*'''Transformers Series 3 18-pack''' (4 cm Die Cast Figure Multipack, 2023)
:For the [[Jada Toys#Nano Metalfigs|third ''Nano Metalfigs'' multipack]], Series 1 Bumblebee was re-released with no noticeable changes.
{{-}}

===''Hollywood Rides''===
*'''Bumblebee Volkswagen Beetle''' (Scale 1/32 Die Cast Vehicle, 2024)
:''Hollywood Rides'' Bumblebee is a 1/32 scaled non-transforming die-cast licensed Volkwagen Beetle with rubber tires and opening doors. He was released and found in retail without any prior announcement.
{{-}}

==Figural Bag Clip==
[[File:FiguralBagClip Bumblebee.jpg|upright=1.22|thumb]]
*'''Bumblebee''' (2020)
:Released by [[Monogram]], this 2.5" 3D foam bag clip takes the form of a chibi Bumblebee.

:It was available only as part of a [[Blindpacking|mystery blind bag]] collection.
{{-}}
[[File:FiguralBagClip 2021 Bumblebee.JPG|thumb]]
*'''Bumblebee''' (2021)
:A non-articulated, non-transforming 3" figure of Bumblebee with an attached clip, also released by Monogram.

:Unlike the previous year's release it was sold on a standard cardback.

{{-}}

==D'elicce==
{{note|All Easter eggs listed below were exclusive to Lojas Americanas, a popular Brazilian chain store.}}
[[File:Brazilian Bumblebee Easter Egg 2020.jpg|upright=1.44|thumb]]
*'''''Transformers'' Easter egg''' (90g, 2020)

:In 2020, [[Brazil]]ian chocolate manufacturer Top Cau, under its kid-focused branch D'elicce, released a ''Transformers''-themed 90g [[Easter]] egg that came inside a relatively large hard plastic handbag based on Bumblebee's evergreen head design.

{{-}}{{anchor|delicce2021}}
[[File:Brazilian Transformers Easter Eggs 2021.jpg|upright=1.44|thumb]]
*'''''Transformers'' Easter egg''' (90g, 2021)

:In 2021, D'elicce released another ''Transformers''-themed Easter egg, this time including a popcorn bucket of [[super deformed|cutesy proportions]] based on either Optimus Prime or Bumblebee.

{{-}}{{anchor|delicce2022}}
[[File:Brazilian Bumblebee Easter Egg 2022.jpg|upright=1.44|thumb]]
*'''''Transformers'' Easter egg''' (90g, 2022)
**''Accessories:'' Egg holder/obstacle piece

:D'elicce's 2022 ''Transformers'' egg included a toy of an evergreen Bumblebee car with the robot mode head sticking out of the roof, creating the illusion that Bumblebee is driving himself.

:The car is made of pure yellow plastic (except for the wheels which are black) and is completely hollow underneath due to the egg being stored inside of it in-packaging. It does come with a curved piece made of black plastic attached to its underside that helps to keep the egg in place, but it's not supposed to stay attached after removing the egg since it prevents the car from touching the ground with its own wheels. The piece can be loosely stuck inside the car for improvised storage, but it's clearly not designed to attach in any other way. Instead, the piece itself features a phrase (written in Portuguese) embossed on its inner side suggesting that it should be used as an "obstacle" for the car to play with. Hey, at least they tried to get creative with it. Meanwhile, an Autobot logo is embossed on the outer side of the piece.

:The toy features no paint applications and instead comes with a sticker sheet with 16 stickers—including the car's front grille, headlights, windows and decorative stripes—and instructions on where to apply them. Attention must be paid while applying the stickers, however, as the instructions incorrectly show the headlights and the rear side windows being applied to the opposite side to the one they were actually intended. The transparent plastic used as packaging tries (and fails) to give the impression that the windows come pre-applied, but in reality only the robot's face actually comes as a pre-applied sticker.

{{-}}{{anchor|delicce2023}}
[[File:Brazilian Bumblebee Easter Egg 2023.jpg|upright=1.44|thumb|You may have noticed they're not exactly striving for originality here.]]
*'''''Transformers'' Easter egg''' (90g, 2023)

:The 2023 version of D'elicce's Bumblebee is a big-headed robot mode figure made entirely of two pieces of yellow plastic. Opening the figure in half reveals a chocolate egg and a sticker sheet inside. As was the case with the previous release, only the face comes with a pre-applied sticker, while the stickers for the chest, arms and legs must be applied manually. The stickers for the arms feature noticeable movie-style Autobot insignias.

{{-}}{{anchor|delicce2024}}
[[File:Brazilian Bumblebee Easter Egg 2024.jpg|thumb|upright=1.44|Did [[Shockwave (Animated)|Shockwave]] do this to you?]]
*'''''Transformers'' Easter egg''' (90g, 2024)
:Yet another Evergreen Bumblebee big head was released in 2024, this time in the form of a lunchbox or something. You can tell they're not even trying anymore.
{{-}}

==''Super Cyborg''==
[[File:SuperCyborgBumblebee.jpg|upright=1.66|thumb]]
*'''Bumblebee''' (2021)
**''Accessories'': Blaster, torso plate

:''Super Cyborg'' Bumblebee is an 11-inch-tall non-transforming vinyl figure produced by [[Super7]]. Its most significant feature is the ability to remove the entire front of the torso to reveal sculpted inner mechanical detailing.

*'''Bumblebee (Clear)''' (2021)
**''Accessories'': Blaster, torso plate

:Another version of ''Super Cyborg'' Bumblebee was available in mostly transparent plastic, with only some black and yellow on the inner torso parts to make the "x-ray" feature more distinct.
{{-}}

==''Minimates''==
*'''Bumblebee''' (Series 1, 2021)
**''Accessories'': Pistol, alternate head, stand

:Part of the first wave of Transformers [[Minimates]] from [[Diamond Select Toys|Diamond Select]], this Bumblebee is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. The set also includes an alternate head for Bumblebee styled after his Generation 1 toy. Due to their small size, all 4 figures in each series are sold in the same blister card.

*'''VHS Minimates Box Set''' (2022)

:''Minimates'' Bumblebee was rereleased as part of a [[San Diego Comic-Con]] 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles a [[Family Home Entertainment]] VHS tape. Only 2500 of this set were produced.
{{-}}

==''R.E.D. [Robot Enhanced Design]''==
[[File:TF-R.E.D.-Bumblebee.jpg|upright=1.66|thumb|Put me with your Marvel Legends and I'm [[B.O.T. (episode)#Animation and technical errors|perfectly scaled!]]]]
*'''Bumblebee''' (2021)
**''Accessories'': blaster, 2 alternate hands, 2 [[Fire Blast effect|blast effects]], [[Energon cube]], chest plate
:Released as part of the third wave of ''[[Transformers R.E.D.]]'' toys, Bumblebee is a non-transforming 6-inch action figure akin to the ones from the ''[[Marvel Comics|Marvel]] Legends'' and ''[[Star Wars (franchise)|Star Wars]] The Black Series'' lines. He features 26 points of articulation and is decoed in an attempt at [[show-accuracy]], with an extra smattering of ''[[War for Cybertron: Siege|Siege]]''-style battle damage. His robot mode is based on [https://www.instagram.com/p/CLo1eYQASuE/ concept art] by [[Ken Christiansen]], which had earlier influenced Bumblebee's look in the [[Transformers (2019 comic)|2019 IDW ongoing comic]] and the ''[[Transformers: War for Cybertron Trilogy (cartoon)|War for Cybertron Trilogy]]'' animated series.

:Bumblebee's chest plate can be removed to reveal details meant to represent his "inner workings". He comes with two sets of hands: one pair of closed fists, and one pair of open hands for holding weaponry and accessories. Speaking of which, he also includes a small blaster accessory (though his product description claims he has two), along with a pair of fire blast effects to simulate weapons discharge. He also comes with an Energon cube.

:As with all ''R.E.D.'' toys, Bumblebee was a Walmart exclusive in Canada and the United States, and was later made available on [[Hasbro Pulse]] in limited quantities.
{{-}}

==''Pop!''==
[[File:Funko Pop Regular Bumblebee G1.jpg|thumb|upright=1.44]]
*'''Bumblebee''' (2021)
**''ID number:'' '''23'''

:Released as part of the ''Pop! Retro Toys'' segment, [[Funko Pop!|Funko]]'s ''Pop!'' Bumblebee is a super deformed vinyl figure based on his original Generation 1 toy, although with a more cartoon-accurate face and carrying a small blaster on his right hand.

{{-}}{{anchor|PopClassics}}
[[File:Funko Pop Target Classics Bumblebee.jpg|thumb|upright=1.44]]
*'''Bumblebee''' (2021)
**''ID number:'' '''28'''

:Exclusive to [[Target]], this version of Bumblebee is instead based on his [[Bumblebee (G1)/toys#Classics|''Classics'' toy]], complete with the [[Wave Crusher]] attached to his back.

{{-}}{{anchor|PopKeychain}}
[[File:Funko Pocket Pop Keychain Bumblebee.jpg|thumb|upright=1.11]]
*'''Bumblebee''' (Pocket ''Pop!'' Keychain, 2021)

:A smaller version of the G1-toy ''Pop!'' Bumblebee with a keychain attached to his head.

{{-}}{{anchor|Digital Pop!}}
*'''Bumblebee''' ([[Funko Pop!#Digital Pop! NFTs|Digital ''Pop!'']], 2022)
**''Rarity:''
***''Monochrome:'' '''Common'''
***''Static:'' '''Common'''
***''Glowing:'' '''Uncommon'''
***''Chrome:'' '''Rare'''
***''Original:''Epic''
:{{W|Non-fungible token|NFT}}s depicting Bumblebee in the Funko style. Interestingly, the [[Ark (G1)|Ark]] seems to be mobile on Earth's surface, something which it never was while Bumblebee was conscious during the [[The Transformers (cartoon)|G1 cartoon]] the figure is likely based on.
<center><gallery heights=200>
File:TRANSFORMERS_COMMON_BUMBLEBEE_MONOCHROME.gif|You like bumblebees? How about a whole hive!
File:TRANSFORMERS_COMMON_BUMBLEBEE_STATIC.gif
File:TRANSFORMERS_UNCOMMON_BUMBLEBEE_GLOW.gif
File:TRANSFORMERS_RARE_BUMBLEBEE_REDCHROME.gif
File:TRANSFORMERS_EPIC_BUMBLEBEE_ORIGINAL.gif
</gallery></center>

{{-}}{{anchor|PopFreddy}}
[[File:Funko Pop Freddy as Bumblebee.jpg|thumb|upright=1.11]]
*'''Freddy Funko as Bumblebee''' (2022)
**''ID number:'' '''50'''

:Part of the ''Pop! Digital'' segment, this regular-sized vinyl figure portrays [[Freddy Funko]] cosplaying as Bumblebee. The body of this figure is the same as the G1-toy version of Bumblebee, while the head has been modified to incorporate Freddy's face and a crown on its top. It could only be acquired by redeeming [[Freddy Funko#Digital Pop!|one of the three 1-of-1 NFTs]] featuring this figure.

{{-}}{{anchor|Pop! Pin}}
[[File:Funko-Pop-Pin-Bumblebee.jpg|thumb|upright=1.44]]
*'''Bumblebee''' (''Pop!'' Pin, 2022)
**''ID number:'' '''17'''
**''Accessories:'' Display stand
:A metallic enamel pin based on Bumblebee's ''Classics'' vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

{{-}}{{anchor|PopPotato}}
*'''Mr. Potato Head Bumblebee''' (''Pop! Digital Retro Toys'', 2022)
**''Rarity:'' '''Legendary'''
**''ID number:'' '''125'''
:Similar in concept to other [[Mr. Potato Head]] toys, this vinyl figure is a representation of said character taking the appearance of Bumblebee, except it can't be taken apart piece by piece.

:This figure is limited to 1550 units and can only be acquired redeeming an NFT representing this version of the character.

{{-}}

==''Zōteki''==
[[File:ZOTEKI-026-Bumblebee.jpg|thumb|upright=1.66]]
*'''Bumblebee''' ([[2021]])
**''ID number'': '''026'''

:A collaboration between [[Hasbro]] and statue/replica brand [[Jazware]], ''[[The Transformers (franchise)|The Transformers]]'' was added as a part of the ''[[Zōteki]]'' line alongside other iconic brands such as [[Marvel Comics|Marvel]], to recreate some of the main "Generation 1" characters. The 26th figure of the ''Zōteki'' line is Bumblebee.

:Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
{{--}}

==Eaglemoss==
[[File:EaglemossChess Bumblebee.jpg|upright=1.11|thumb|Cliffjumper would've honestly fit the role.]]
* '''Transformers Gen-1 Chess Set''' (<s>2021</s>)
:In the planned [[Chess#Eaglemoss|Transformers Chess Set]] by [[Eaglemoss]], a relatively large and very well-detailed statue of Bumblebee was slated to be one of the Pawn pieces on the Autobot side.

:A Kickstarter campaign to raise the necessary funds for this project was launched but failed to meet its goal by September 24, 2021, and the whole thing was canceled.
{{canceledtoy}}
{{-}}

==Prime 1 Studio==
===''Cutie1''===
[[File:Cutie1 Bumblebee Figure.jpg|upright=1.11|thumb]]
*'''Bumblebee''' (2022)
**''ID Number'': '''No:057'''
**''Accessories'': Stand

:[[Prime 1 Studio]]'s ''Cutie1'' Bumblebee is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

{{anchor|Cutie1keychain}}
*'''Bumblebee''' (Keychain, 2021)
**''Accessories'': Stand, chain

:Part of a marketing push following the announcement of the figure above, an acrylic keychain of ''Cutie1'' Bumblebee was released, along with other products such as stickers, T-shirts, hand towels and totebags using its design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.
{{-}}

==Acrylic keychain series==
[[File:E-Hobby Optimus Prime and Bumblebee keychains.jpg|upright=1|thumb]]
*'''Convoy & Bumble''' ([[October]], [[2022]])

:Released as part of the first wave of an [[e-HOBBY]] exclusive series, this pair of keychains depicts character art and assets re-used from [[Optimus Prime (G1)|Optimus Prime]] and Bumblebee's [[The Transformers: Masterpiece|''Masterpiece'']] releases, namely [[Optimus Prime (G1)/toys#MP44|MP-44 Convoy]] and [[Bumblebee (G1)/toys#MP45|MP-45 Bumble and Spike 2.0]] respectively.

{{--}}
==''Authentics''==
{{anchor|ClipBot}}
[[File:ClipBotsBumblebee.jpg|upright=1|thumb]]
*'''Bumblebee''' (2018)

:''Clip Bots'' Bumblebee is a small [[super deformed]] plush that can be "transformed" into a little car by flipping it inside out. It features a plastic clip so it can dangle from whatever you clip it to.
{{-}}
{{anchor|22Mask}}
[[File:Authentics Bumblebee Mask 2022.jpg|upright=1|thumb]]
*'''Bumblebee''' (2022)

:Modeled after Bumblebee's evergreen design, this [[roleplay toy]] mask was released along side an [[Optimus Prime (G1)/merchandise#22Mask|Optimus Prime]] version.
{{-}}

{{anchor|24Mask}}
[[File:Authentics Bumblebee Mask 2024.jpg|upright=1|thumb]]
*'''Bumblebee Mask''' ([[2024]])

:Manufactured by [[Peachtree Playthings]], this mask is a completely new mold based on Bumblebee's evergreen design, though some details such as the two black vertical stripes over his eyes are unpainted. It was found at discount stores such as Dollar Tree with no prior announcement. As with the previous mask, it was released along side an [[Optimus Prime (G1)/merchandise#24Mask|Optimus Prime]] version.
{{-}}
{{anchor|CBbumblebee}}
[[File:Authentics Cyber Battlers Bumblebee.jpeg|upright=1|thumb]]
*'''Cybertron Battlers Bumblebee''' ([[2022]])
:Released in the ''Cybertron Battlers'' subline of ''Authentics'', this vinyl figure is a non-transforming, 5.5 inch rendition of Bumblebee in his evergreen design with limited points of articulation. He has a stinger weapon molded into his right forearm, complete with molded sparks.

:He comes packaged either individually with a tag, or in twos in a box together with [[Optimus Prime (G1)/merchandise#Authentics|Optimus Prime]] and [[Megatron (G1)/merchandise#Authentics|Megatron]].
{{-}}

{{anchor|AquaPals}}
[[File:AquaPalsMediumBumblebee.jpg|upright=1|thumb]]
*'''Bumblebee''' (2023)

''Aqua Pals'' Bumblebee was released by [[WAHU]]. It is a plush made out of material designed to dry quickly, allowing it to be played with in water. A medium and a small version were released, the smaller version having less detail. This is most noticeable in the arms, which go from having multiple distinct segments to almost entirely cylindrical, besides the hands. The medium plush is 16 inches tall.
{{-}}
{{anchor|Teeturtlereverse}}
[[File:Small_Reversible_Bumblebee_Teeturtle.jpg|upright=1|thumb]]
*'''Reversible Plushie Bumblebee''' ([[2025]])

:Released by [[TeeTurtle]], ''Reversible Plushie'' Bumblebee is a round, [[super deformed]] plush, that can be turned inside out to reveal a car alternate mode. A 3 inch version was released in blind boxes, while a 6 inch version was made available exclusively at [[Walmart]]. It appears to be based on Bumblebee's [[evergreen]] design.
{{-}}
{{anchor|Teeturtlecloudhead}}
[[File:Cloudheads_Bumblebee_Teeturtle.jpg|upright=1|thumb]]
*'''Cloudheads Bumblebee''' (2025)

:Also released by [[TeeTurtle]], ''Cloudheads'' Bumblebee is another [[super deformed]] plush based off of Bumblebee's [[evergreen]] design. It is 5 inches tall. It has a large head, and its body is weighted with glass beads.
{{-}}
{{anchor|PaintYourOwn}}
*'''Paint Your Own Bumblebee''' (2025)
Manufactured by [[RMS International]], ''Paint Your Own'' Bumblebee is a white plaster version of Bumblebee's face, mostly flat with raised details. It comes with 4 small paints (blue, gray, and two shades of yellow), a paintbrush, and a pack of gold glitter.
{{-}}
==Icon Heroes==
*'''Optimus Prime X Bumblebee Retro Pin Set''' (2022)
: A hard enamel pin based on Bumblebee's original G1 package art made by Icon Heroes. It comes carded with an [[Optimus Prime (G1)/merchandise#Icon Heroes|Optimus Prime]] pin.

{{comingsoontoy}}

{{--}}

==''Magic: The Gathering''==
[[File:MTG-Goldbug.jpg|thumb|upright=1.66|Pairs well with the Equipment Artifact [[Hard hat|Hard Hat]].]]
*'''Goldbug, Humanity's Ally / Goldbug, Scrappy Scout''' (2022)
**''ID number:'' '''011/015'''
**''Set code:'' '''BOT'''
**''Color identity:'' '''White/Blue'''
**''Casting cost:'' '''{1}{W}{U}''' (front), '''{W}{U}''' (back)
**''Artist:'' [[Andrew Griffith]]
:"Goldbug, Humanity's Ally" is part of the 2022 ''[[Magic: The Gathering]]'' ''[[mtg:Universes Beyond|Universes Beyond]]'' ''[[mtg:Transformers|Transformers]]'' card set, found in Set Booster and Collector Booster packs of ''Magic''<nowiki>'s</nowiki> ''[[mtg:The Brothers' War|The Brothers' War]]'' set. It can be reversed to become "Goldbug, Scrappy Scout", representing Goldbug in vehicle mode.
:A variant of this card was available solely in Collector Booster packs, depicting [[Goldbug (SG)#Magic: The Gathering|''Shattered Glass'' Goldbug]].

{{--}}

==XM Studios==
[[File:XMStudiosBumblebeeStatue.jpg|upright=1.66|thumb|Cute and kid-friendly... ''to the extreme!'']]
*'''Bumblebee''' (2022)

:[[XM Studios]]' statue of Bumblebee is 13" tall, made of hand-painted porcelain. Bumblebee has light-up eyes and two different head sculpts, one with his standard face and one with his battle mask. Bumblebee is accompanied by Spike, wearing an exo-suit. The set also includes a sculpted representation of Bumblebee's car mode that can be displayed next to the robot.

:258 pieces were produced, with a suggested price of about $1,200 US.

{{-}}

==Threezero==
[[File:Threezero-MDLX-Bumblebee.jpg|thumb|upright]]
*'''Bumblebee''' (MDLX, 2022)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one "Laser Blaster", one alternate masked head, three pairs of hands (relaxed, closed, posed)
:[[Threezero]]'s debut figure for the MDLX line, this version of Bumblebee is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Bumblebee is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and heads, with the alternate visored face specifically resembling his G1 toy. The three pairs of hands he comes with are relaxed splayed-open hands, closed fists, and posed hands meant to hold his included Laser Blaster (which in turn is based on the pistol used in the cartoon). His back tire can also be removed.

:Bumblebee was redecoed into his Gold Edition release below and retooled with a new head into [[Cliffjumper (G1)/toys#Threezero|Cliffjumper]].

::*''[https://www.threezerohk.com/product/mdlx-bumblebee/ More information on MDLX Bumblebee at Threezero]''
{{MDLXBumblebeeMold}}
{{-}}

{{anchor|MDLXGold}}
[[File:Threezero-MDLX-Bumblebee-Gold.jpg|thumb|upright]]
*'''Bumblebee (Gold Edition)''' (MDLX, 2022)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one "Laser Blaster", one alternate masked head, three pairs of hands (relaxed, closed, posed)
:A golden redeco of the above Bumblebee release that calls to mind both his [[Bumblebee (G1)/toys#Generation 2|G2 toy]] and [[Bumblebee (G1)/toys#Goldbug|Goldbug]], this figure was limited to 2000 units worldwide.

::*''[https://www.threezerohk.com/product/mdlx-bumblebee-gold-edition/ More information on MDLX Bumblebee (Gold Edition) at Threezero]''
{{MDLXBumblebeeMold}}
{{-}}

{{anchor|MDLXVintage}}
*'''Bumblebee (Vintage Animation Edition)''' (MDLX, 2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one "Laser Blaster", one alternate masked head, three pairs of hands (relaxed, closed, posed)

:Another redeco of Bumblebee, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

:Vintage Animation Edition Bumblebee, [[Megatron (G1)/merchandise#MDLXVintage|Megatron]] and [[Optimus Prime (G1)/merchandise#MDLXVintage|Optimus Prime]] were revealed in a [https://newsroom.hasbro.com/news-releases/news-release-details/40-years-one-legacy-hasbro-celebrates-transformers-40th press release] from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

::*''[https://www.threezerohk.com/product/mdlx-bumblebee-vintage-animation-edition/ More information on MDLX Bumblebee (Vintage Animation Edition) at Threezero]''
{{MDLXBumblebeeMold}}
{{comingsoontoy}}
{{-}}

==''Transformers × Mini World''==
[[File:MiniWorldBumblebee.jpg|thumb|upright=1.66]]
*'''Bumblebee''' (2023)
**''Accessories'': Transforming base, gun, sword, machine part, crane arm, 2 connectors

:''[[Transformers × Mini World]]'' Bumblebee is a tie-in to the popular [[China|Chinese]] game ''[[Mini World]]''. It comes with a display base which can fold up into a cube-shaped representation of a hatchback, complete with rolling wheels. The figure can transform into a storage mode to store fully inside the cube, or you can remove his head and install the entire cube on his neck. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and sword accessories.

:Each set includes [[Build a Figure]]-like machinery components which can be combined with parts from other sets to make new structures.

:This figure was exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.
{{-}}

==Mochibots Transformers Plush==
[[file:bumblemochibots.jpg|thumb|thumbright=1.5|[https://youtu.be/2RPV-hD-Eo0?si=klasB9IQ2dTTLPd9 ''They don't allow you to have Bees in here.'']]]
<ul class="iconlist">{{Bp-a1|'''Mochibots "Transformers" Plush Bumble''' (2023)}}</ul>
:Created in the line of soft, cuddly little 'bots, [[Mochibots Transformers Plush|Mochibots]] Bumble is a 5.5 Inch tall plushie of everyone's favorite yellow Autobot, applying a stylized "Fumo" look for Bumblebee's Sunbow Cartoon Animation model, with rounded shapes and chubbier proportions making him an adorable stuffed adaptation of his 80's design. Almost every detail is sewn-on, allowing for depth and texture on different parts of the plush. On the back, Bumble sports his spare tire, represented by a yellow ball of plush. In addition, his eyes and window detailing are all made with a special sparkly fabric, which allows for those details to slightly shimmer under light.

:Bumble was released as part of the first wave of Mochibots plush toys, alongside Optimus Prime, Cliff, and Shattered Glass Optimus Prime in 2023. This line was exclusive to China and Japan, with almost all of them being locked to Asia via [[amiami|amiami's]] storefront.

{{-}}
==Just Play==
{{anchor|Podpals}}
[[File:PodpalsMiniBumblebee.jpg|upright=1|thumb]]

*'''Podpals Bumblebee''' (2023)

Made by [[Just Play]], ''Podpals'' Bumblebee is a rounded plush. It has tiny flaps of fabric for its legs and horns, while other details are printed on. There are two versions, an 8 inch version and a 3 inch version. They are identical besides their size.

<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2022)}}</ul>
:Bumblebee is a small, soft plastic figure, 2" tall, with no articulation. It's overall based on his appearance in the G1 cartoon with a few missing paint apps; all of which are on his feet.
:The packaging is G1-styled with the classic black-red gradient and the G1 Optimus Prime toy in the top right corner.

[[File:JustPlay_G1_Bumblebee.jpg|thumb|upright=.66]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2024)}}</ul>
:This figure is identical to the original release. Unlike the original release, however, he also comes with a foil sticker depicting his G1 design on a card with a sort of profile picture on the back and text underneath it saying '"BEE," AS HIS FRIENDS CALL HIM, IS THE AUTOBOTS' ADVANCE SCOUT.' The packaging is also different as it no longer features Optimus Prime (having been replaced with a block advertising the new card).
: There's a variant of this found at stores like Dollar Tree where the block advertising the card is moved to the top left with a red circle that says "$1.25" in it in the top right instead.

{{-}}
{{anchor|Duckalooz}}

*'''Duckalooz Bumblebee''' (2025)

:''Duckalooz'' Bumblebee has the face and general body shape of a normal rubber ducky, with a helmet and body details based on Bumblebee. The details appear to be more closely based on [[Bumblebee (Movie)|movie Bumblebee]], but it is sold with a distinctly G1-themed tag.
{{-}}

==Kotobukiya Bishoujo Series==
[[File:KotobukiyaBishojouBumblebee.jpeg|thumb|Happy slapping hoodies with Asbos and ringtones.]]
*'''Bishoujo Series Transformers Bumble/Bumblebee''' (August 2023)
**''Known designers:'' [[Shunya Yamashita]] (artist)

:''[[Kotobukiya]] [[Bishoujo Series]]'' Bumble/Bumblebee reimagines the Autobot scout as a ''bubbly'' anime girl (formally termed as a ''{{w|Bishōjo}}''). The Bishoujo Bumblebee statue sees various elements of the classic G1 robot design translated into fashion and style choices, such as the hood adorned with the G1 horns, the car roof and window chest as a light blue undershirt visible underneath the sleeveless hoodie, and the hood of the VW Beetle altmode as shoes.

:This statue was later recolored to create ''Bishoujo Series'' [[Cliffjumper (G1)/toys#Kotobukiya Bishoujo Series|Cliffjumper]].

{{-}}

==Fools Paradise==
[[File:LOWFOOL League of Steel Bumblebee.jpeg|upright=1.66|thumb]]
*'''Bumblebee''' (2023)
**''Accessories'': Football

:Part of a collaboration between Hasbro and [[Hong Kong]]-based online store ZCWO, Bumblebee joins the "League of Steel" subline of [[Fools Paradise]]'s LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues of [[Neon Genesis Evangelion|Evangelion]]s and {{w|Gundam}}s. He is depicted as a human man wearing heavily Bumblebee-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache.

:Preorders for Bumblebee opened in July 2023, with a projected release date of November.

{{-}}

==''Hot Wheels''==
{{anchor|HWScreenTime}}
[[File:Hot Wheels HW Screen Time Bumblebee.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1| '''Bumblebee''' (HW Screen Time, 2024)}}</ul>
:*''Mainline ID number:'' '''186/250'''
:*''HW Screen Time ID number:'' '''9/10'''
:*''Known designers'': Jerry Thienprasiddhi (Mattel)
:Made in collaboration with [[Mattel]], ''[[Hot Wheels (franchise)|Hot Wheels]]'' Bumblebee is a non-transforming and fully licensed Volkswagen Beetle at 1/64 scale, slightly retooled from the existing "[[wikia:hotwheels:VW Bug|VW Bug]]" Hot Wheels casting. Bumblebee lacks a robot mode, though his face is sculpted into the bottom of the car undercarriage. The toy can be hauled in the later released ''Hot Wheels'' [[Ultra Magnus (G1)/merchandise#Hot Wheels|Track Fleet Ultra Magnus]] trailer.

:There are two versions of this release. The original one is in a traditional yellow color with a red Autobot insignia on the left side of the hood. It was then followed by a variant painted gold, possibly in reference to Goldbug, with a black insignia instead.

:As is the case with most ''Hot Wheels'' releases, the packaging depicts a realistic render of the miniature vehicle, which is colored accordingly to the variant of the toy packaged with it.

{{-}}{{anchor|HWCustom}}
[[File:Hot Wheels Transformers Custom Volkswagen Beetle.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Custom Volkswagen Beetle''' (Transformers, 2024)}}</ul>
:*''Transformers ID number:'' '''1/5'''
:*''Known designers'': Mike McClone (Mattel)
:A redeco of the [[wikia:hotwheels:Custom Volkswagen Beetle|Custom Volkswagen Beetle]] casting to resemble the color scheme and insignia of Bumblebee despite the casting being a much more chopped down hot rod version of the Beetle. The packaging makes use of stock images of evergreen Optimus Prime and Bumblebee.

{{-}}{{anchor|HWSkate}}
[[File:Hot Wheels Skate Bumblebee.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (Skate, 2024)}}</ul>
:*''Accessories'': Finger sneakers
:Part of the ''Hot Wheels Skate'' subset, this is a Bumblebee-themed finger skateboard that comes with a pair of yellow finger sneakers. The shape and packaging use Dreamwave-era artwork of Bumblebee.

{{-}}

==''Yolopark''==
===''AMK Mini''===
[[File:Yolopark-TF-AMK-Mini-Bumblebee.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2024)}}</ul>
:*''Accessories'': 2 additional pairs of hands (Splayed, Pointing), Autobot Pistol

:Released as part of Yolopark's ''AMK (Advanced Model Kit) Mini Series'', this Bumblebee kit can only be completed by snapping the pre-painted pieces together. Aside from the identical hand parts used for most of the ''AMK Mini''s, Bumblebee also comes with his usual signature Autobot pistol.

:This mold was used to make the unofficial BotCon 2025 exclusive "The Sound of Science" [[Glyph (Universe)#Yolopark|Glyph]] and the single-pack [[Cliffjumper (Yolopark)|Cliffjumper]].

{{-}}
<ul class="iconlist">{{Bp-a1|'''Bumblebee (IDW)''' (2025)}}</ul>

:The second wave of the ''AMK Mini''s features a new mold of the Autobot Scout in his [[Evergreen]] design used in ''[[Transformers: Unicron]]''.

{{uncertaintoy}}
{{-}}

===''AMK''===
[[File:Yolopark-TF-AMK-Bumblebee.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2025)}}</ul>
:*''Accessories'': 1 additional pair of hands, Autobot pistol, alternate mouthplate

:The ''Advanced Model Kit'' Series Bumblebee is a slightly larger version of the character, and unlike the previously-released AMK Pro kits, he is purely made out of ABS plastic with no die-cast. In addition to his extra pair of hands and an Autobot Pistol, Bumblebee comes with an additional smiling mouthplate.

{{-}}{{anchor|AMKHasbroEdition}}
[[File:Yolopark-TF-AMK-Bumblebee-Hasbro-Edition.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (Hasbro Edition, 2025)}}</ul>
:*''Accessories'': 1 additional pair of hands, Autobot pistol, alternate mouthplate, Stand with Mount St. Hilary backdrop

: The ''AMK'' Bumblebee kit is re-released in Asian markets under the "Hasbro Edition" branding. While the kit itself was unchanged, Bumblebee also includes an additional display stand featuring a backdrop of Mount St. Hilary.

{{-}}{{anchor|AMKComboSet}}
[[File:Yolopark-TF-AMK-Optimus-Prime-and-Bumblebee-Combo-Set.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime and Bumblebee Combo Set''' (2025)}}</ul>

:The "Hasbro Edition" of the AMK Bumblebee kit is also sold as a two-pack with the same line's Optimus Prime. The 2-pack also comes with a unique acrylic stand of Prime himself.

{{-}}

===''BMK''===
[[File:Yolopark-BMK-Bumblebee.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2025)}}</ul>
:*''Accessories'': Autobot pistol

:Marketed as a starter figure for the 2020s young lads, the ''BMK'' (Which stands for "Beginner Model Kit") Bumblebee is a 13cm version of the character, with his design based on the ''AMK'' release. As with other ''BMK''s, Bumblebee features similarly basic articulation, consisting of a ball-jointed head, ball-jointed shoulders, single-axis 90-degree elbows, a rotating waist, and slightly swiveling ankles...that's it.
{{-}}

==Blokees==
===Galaxy Version===
[[File:Blokees-TF-Galaxy-Ver-03-Bumblebee.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2024)}}</ul>
:*''Series:'' '''Galaxy Version 03 - The Autobot Run'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, left thumbs up hand, Autobot pistol, blast effect, communications monitor, [[Energon]] cube, holdable Autobot/Decepticon insignias

:Released in the third wave of ''Galaxy Version'' line of blind boxes, [[Blokees]] Bumblebee is a roughly 4-inches tall, highly-articulated, and non-transforming snap-on model kit of the Autobot Scout. He is built on a "Standard Body" skeleton shared with other Blokees figures in the line, but with different body pieces to make them distinct. As advertised in the box, Bumblebee has a pull rate of 1 in every 9 boxes, or three times across four cases. Unlike the previous line's Cliffjumper, Bumblebee features a color-coded head construction instead of a 2-piece head with pre-painted eyes.

:Bumblebee comes with a pair of closed and open hands and a left hand molded in a thumbs-up exclusive to this figure. He also comes with his own Autobot pistol and its respective blast effect, an Energon Cube, and a communications monitor that either of the closed hands can wield. However, it's recommended plugging the piece onto one of his forearms (the arms must be swapped and the forearms rotated to show its peghole.). Bumblebee also comes with a stand with four studs on top, which can be plugged into and connected to similar stands.

{{-}}
===Defender Version===
{{Note|Every case comes with a random Commemorative Card, with 10 Common, 1 Gold, and 1 Silver for each out of every 12 cards. Meanwhile, subsequent waves after the first one feature a rectangular collectible card for each individual box.}}
[[File:Blokees-TF-Galaxy-Version-Defender-01-Brilliant-Bumblebee.jpg|thumb|300px|Somehow his ''Shattered Glass'' counterpart took his spot as the next wave's Special Galaxy Type.]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee (Brilliant)''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Pistol

:This ''Defender Version'' kit of Bumblebee (decoed in his Goldbug-inspired colors) is a 2.2-inch (5.5cm) figure, a few inches smaller than the ''Galaxy Version'' kits, but still articulated. Unlike his ''Galaxy Version'' kit, Bumblebee only comes with the generic pistol used by other Defender kits.

:Like most of the larger Galaxy Version kits, Bumblebee features a simple neck joint that is colored to match his optics, allowing it to be see-through from his head's eye holes. This mold was also used to make the chase [[Goldbug (SG)|SG-Bumblebee]] kit.

{{-}}{{anchor|TheOverthrowBB}}
[[File:Blokees-TF-Galaxy-Version-Defender-02-Bumblebee.jpg|thumb|300px|]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2025)}}</ul>
:*''Series:'' '''Defender Version 02 - The Overthrow'''
:*''Accessories'': Pistol

:One of the six headline figures for the second ''Galaxy Version Defender'' line, this Bumblebee is a redeco of the previous kit, now in his regular, classic coloration.
{{-}}{{anchor|SpecialArmorType}}
[[File:Blokees-TF-Galaxy-Version-Defender-02-Special-Armor-Type-Bumblebee.jpg|thumb|250px|''You, sir, have crossed the wrong sword!'']]
<ul class="iconlist">{{Bp-a1|'''Bumblebee (Special Armor Type)''' (2025)}}</ul>
:*''Series:'' '''Defender Version 02 - The Overthrow'''
:*''Accessories'': Sword, Shield

:The "Special Armor Type" version of the Bumblebee is an alternate version of the original kit, decked out in metallic paint, and comes with additional armaments such as the sword and backpack wings (inspired by his ''Robots in Disguise'' namesake's sword and wings) and an energy shield (inspired by the shield in [[Rebellion (Prime)|''Rebellion'']]). Unlike the chase SG-Bumblebee variant, this kit has an even slimmer pull rate of '''''1''''' in every 144 boxes, or once per twelve cases.

{{-}}
===X Yearly Version===
{{anchor|Exclusive Yearly Version}}
<ul class="iconlist">{{Bp-a1d1|'''Exclusive Yearly Version - Golden Lagoon · Defence''' (2025)}}</ul>
{{toystub}}
{{-}}
===Shining Version===
[[File:Blokees-TF-SV03-Bumblebee.jpg|thumb|upright=1.66|Build-Your-Own Bumblebee Action Figure owned by [[Anthony Duranti]].]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (Shining Version, 2025)}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, left thumbs up hand, Autobot pistol, Spike Witwicky figurine, communications monitor

:Released in the third wave of Blokees' ''Shining Version'' line, this edition of the original ''Galaxy Version'' Bumblebee mold is now decoed in his yellow-and-blue [[Marvel Comics]] coloration, and like his second Yearly Version set release; he features translucent eye parts and painted chest, and a torso frame that lights up upon shaking (or at least just ''lightly'' tap some areas on the torso), causing the eyes and his chest window to glow for a limited time. In addition to his identical accessories from the ''Galaxy Version'' release, Bumblebee also comes with an additional Spike Witwicky figurine replacing the previous release's blast effect, and a larger figure stand. The visual on a communications monitor depicts Spike Witwicky in his Exo-Suit in ''The Transformers: The Movie''.
{{--}}

==Auldey==
[[File:Auldey-TF-AAE-bumblebee.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (Alpha Action Elite, 2025)}}</ul>
:*''Series:'' '''Attack on Earth'''
:*''ID Number'': '''AAE-011'''
:*''Accessories:'' 2 pairs of hands (1 pair for each), Shrapnel's blaster, Bumblebee's blaster, Laserbeak, Energon cubes, 2 trading cards
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of the second wave of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Bumblebee is a roughly 2-inch non-transforming but highly articulated action figure, and is retool of [[Cliffjumper_(G1)/toys#Auldey|Cliffjumper]]. Aside from the extra pairs of open-palm hands, Bumblebee comes with his blaster and a back tire piece that the buyer must assemble.

:Bumblebee is released as a 2-pack with [[Shrapnel_(G1)#Auldey|Shrapnel]] and [[Ravage (G1)/toys#Auldey|Ravage]], while coming with his trading card. As advertised in the box, the lineup had a 11/72 probability of getting the 2-pack. The mold was redecoed as [[Goldbug_(SG)#Auldey|SG Bumblebee]] and further retooled into his upgraded form of Goldbug as seen below.

{{-}}
[[File:Auldey-TF-AAE-Goldbug.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Goldbug''' (Alpha Action Elite, 2025)}}</ul>
:*''Series:'' '''Attack on Earth'''
:*''ID Number'': '''AAE-017'''
:*''Accessories:'' 2 pairs of hands (1 pair for each), Goldbug's blaster, Bumblebee's blaster, 2 trading cards
{{toydesigner|[[Lam Ahtek]]}}

:The other chase figure(s) of the second wave, packed in alongside his [[Goldbug (SG)#Auldey|negative universe counterpart]], Goldbug is a further redeco and retool of Bumblebee with metallic paint and a new head, backpack, and feet. Aside from the usual pairs of hands, he also comes with his blaster, redecoed in silver, alongside a trading card.

:As advertised in the box, the lineup had a 1/72 probability, or once every twelve cases, of getting the 2-pack.
{{--}}

==Beyblade X==
[[File:Beyblade_X_Transformers_Bumblebee.jpg|thumb]]
*'''Bumblebee and Shockwave Multipack Set''' (2025)

:'''Bumblebee 3-60GP''' was available in a two-pack with [[Shockwave_(G1)/toys#Beyblade_X|Shockwave 5-80O]]. It consists of three pieces that can be interchanged with those of [[Beyblade#BEYBLADE X|other ''Beyblade X'' tops]]; an attacking "Blade" primarily made of metal, a "Ratchet" that locks parts together and determines height, and a "Bit" that touches the ground and determines movement.

:The "Bumblebee" Blade features evergreen art of Bumblebee on its central Gear Chip and is partial of the mainline ''Beyblade X'' Blade "Helm Knight". The Ratchet (3-60) and Bit (Gear Point) are recolored parts from other ''Beyblade X'' tops.

:In Hasbro territories, a QR Code sticker hidden underneath the Blade can be scanned into the ''Beyblade X'' companion app. In Takara-Tomy territories, the QR Code stickers are omitted in favor of a Beycode Card packed with the instructions. However, scanning any of these QR codes only awards the player with in-app points, and will not unlock the Beyblade for in-game use like it would for any mainline ''Beyblade X'' tops.

{{-}}

==Ty==
* '''Beanie Bouncer Optimus Prime'''
[[File:Bouncer-bb.jpg|thumb|200px|]]

:A bouncing ball covered in fur produced by Ty, creator of the more famous Beanie Babies and Beanie Boos. Bumblebee's horns are represented by additoinal pieces of felt material coming out of the ball. Opposite the face is an Autobot symbol.

:Bumblebee is also available in a three set alongside Optimus Prime and Megatron.

{{-}}

==References==
{{reflist}}

[[Category:3D Battle-Cards]]
[[Category:Attacktix]]
[[Category:Decoys]]
[[Category:Generation 1 Autobots]]
[[Category:MyClone]]
[[Category:Robot Heroes]]

File:Candy con bb.jpg

2025-12-27T01:07:46Z

Leia G: The Candy Con Controller Bumblebee shell.

The Candy Con Controller Bumblebee shell.

Transformers Ã— Bump of Chicken EX Episode: 02

2025-11-01T18:41:52Z

Leia G: /* Synopsis */ added the actual synopsis.

{{Comicstory|
|seriesissue=''[[Bump of Chicken|Transformers × Bump of Chicken]]'' EX Episode: 02
|prev=Transformers × Bump of Chicken EX Episode
|image=Bump of Chicken Convoy comic.jpg
|caption=
|publisher=[[TakaraTomy]]
|date=[[December 7]], [[2024]]
|original story=[[Chama]] (Bump of Chicken)
|story and color art=[[Hiromi Wakabayashi]] ([[Studio Trigger|Trigger Inc.]])
|artist=[[Akira Amemiya]]
|packaged with=[[Optimus Prime (G1)/toys#Bump of Chicken|''Bump of Chicken'' Convoy]]
}}

==Synopsis==

In the year 2024, [[Cybertron]] has once again run out of energy. [[Optimus Prime (G1)/Generation 1 cartoon continuity#Japanese Cartoon Continuity|Optimus Prime]] has come to Earth, but finds himself growing weak. He notices a strong Energon signature coming from the Tokyo Dome, and invites himself to the [[Bump of Chicken]] show by crashing through the roof. After the initial shock, the band decides to use the power of rock and roll to wake him up. This surge of energy re-energizes Optimus, who gains a new color scheme. Everyone celebrates, and Optimus leaves, recommitting himself to the protection of the planet Earth.

==Featured characters==
{{featuredcharacters
|c1=
*[[Optimus Prime (G1)|Optimus Prime]] (1)

|h3=[[Bump of Chicken]]|c3=
*Motoo Fujiwara (2)
*[[Chama]] (3)
*Hiroaki Masukawa (4)
*Hideo Masu (5)
}}

==Notes==

[[Category:Bump of Chicken]]
[[Category:Crossovers|Bump of Chicken EX Episode: 02]]
[[Category:Pack-in material]]

Optimus Prime (G1)/merchandise

2025-10-30T01:16:42Z

Leia G: a second spin masters puzzle has been discovered. arg.

{{suite}}

'''Optimus Prime''' is a bit of a shill.
==Stamp Bot==
[[File:OptimusPrime-StampBot-1984.JPG|thumb|Truck stamp is cool!]]
*'''Optimus Prime''' (1984)
:Made by [[HG Toys]], Stamp Bot Optimus Prime is a small, non-poseable figurine of Optimus Prime based on his toy with a rubber stamp on the base, and a cap with a felt "floor" that was soaked in ink. The stamp made an image of Optimus Prime's cab mode.
{{-}}

==The Transformers Cookie Jar==
*'''The Transformers Cookie Jar''' (1984?)
:A ceramic cookie jar in the likeness of Optimus Prime's head. The top of Prime's head lifts off for the storage of delicious baked goods or Energon or what-have-you. The cookie jar was manufactured by [[Great American Housewares]] under license from [[Hasbro]].
::*''[http://www.tfw2005.com/boards/transformers-toy-discussion/179468-optimus-prime-cookie-jar-price-check.html Images of The Transformers Cookie Jar at TFW2005]''
{{-}}

==Collegeville Costumes==
{{anchor|CollegevilleG1}}
*'''Optimus Prime''' (1984)
:Although [[Collegeville Costumes]] only released a small number of Transformers [[Halloween]] costumes, and made some odd choices for characters to depict in the process, Optimus Prime was an obvious choice as one of their first releases. The costume consists of a thin plastic facemask based directly on the Optimus toy's head complete with yellow eyes, and an orange and yellow plastic smock decorated not with the details of Optimus' body, but with his package art and the Transformers logo.

*'''Optimus Prime''' (1993)
{{anchor|CollegevilleG2}}
:Optimus Prime recieved a second costume from Collegeville for their line of ''[[Transformers: Generation 2 (franchise)|Transformers: Generation 2]]'' line. As with the 1984 Collegeville costume, it consists of a thin plastic mask held on by elastic. Unlike the previous costume, the plastic smock is now decorated with the details of Optimus' G2 body, as well as having his name and the G2 logo on it.
{{-}}

==Vehicle Play Tent==
[[File:Vehicleplaytent.jpg|thumb|Both a big truck ''and'' a series of tubes.]]
*'''ERO''' (1984?)
:The Vehicle Play Tent was part of the deluge of Transformers merchandise in the 80s. The tent was constructed by means of a series of plastic tubes that fit into sockets on corner pieces (similar to the "k'nex" building system that arrived a few years later), then a vinyl cover was slipped over this PVC skeleton to make the tent.
{{-}}

==Oral Care Station==
*'''Optimus Prime Oral Care Station''' (1984/85?)
:An electric toothbrush in the likeness of Optimus Prime. A battery-operated feature causes the toothbrush (attached at Prime's left wrist) to move back and forth. The set also included a cup for [[water]], an extra brush head, and a stand to hold the various accoutrements.
::*''[https://www.flickr.com/photos/14985789@N07/3207711517/?rb=1 Image at Flickr.com]
::*''[http://fredsworkshop.com/oral.html Images of the Oral Care Station in-box at FredsWorkshop.com]''
{{-}}

==Transformers Milk Caramel==
[[File:Tfcaramel optimus prime.jpg|thumb|upright=1.66|Note: Do not eat! ... the candy. The toys taste better.]]
*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A small soft-rubber figurine (known as a ''keshigomu'' in Japan) of Optimus Prime was released as part of [[Kabaya]]'s line of ''[[Transformers Milk Caramel]]'' [[candy toy]]s. Like all the figures from the 1985 range, Prime came blindpacked, and was available in a variety of colors including white, blue, yellow, green and orange. As the name of the series suggests, he came with a piece of caramel candy.

*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A second Optimus Prime ''keshigomu'' was included in the second wave of ''Milk Caramel'' figures, sporting some broader proportions and more toy-based design cues like visible wheels, holding its gun in its left hand, rather than its right. This figure was available in red, yellow and blue variations; a baffling variant is known to exist with a ''Decepticon'' symbol on its left shoulder!

*'''Convoy''' (1985)
**''ID number:'' '''2'''
:The second ''Milk Caramel'' wave also contained a third Optimus Prime figure, largely identical to the second, except with its gun in its right hand, and holding its left arm aloft. Again, this figure was available in red, yellow and blue variations.
{{-}}

==Transformers Choco==
[[File:Tfchoco optimusprime.jpg|thumb]]
*'''Convoy''' (1985)
:A small solid-color snap-together model kit of Optimus Prime was released by Kabaya as part of their ''[[Transformers Choco]]'' line, coming packaged with small chocolate candies similar to [[M&M's]] called "Chocolate Dots". The kit can transform from robot to vehicle mode, though this version of Prime doesn't have any hands.

*'''Convoy''' (1985)
**''Accessories:'' Two fists
:A second ''Choco'' version of Prime was upsized from the first a little, and was given a pair of removable fists, the right one clutching Prime's [[ion blaster]].
{{-}}

==Transformers Gum==
[[File:Tfgum optimusprime.jpg|thumb|upright=1.66]]
*'''Convoy''' (1985, 1997)
**''Accessories:'' Two fists, ion blaster
:In addition to the small ''Choco'' model kit, Kabaya also released a larger version of Prime under their ''[[Transformers Gum]]'' line. Essentially a downsized version of the original Prime toy (sans trailer), the kit is sculpted from black, red, and grey plastic, features stickers rather than paint applications for details, and came with a stick of gum.

:This kit was reissued in 1997 by might-or-might-not-be official Transformers licensee [[ToonTown]] in [[South Korea]] (possibly, in a 2-pack with a reissue of ''Transformers Gum'' [[Soundwave (G1)/merchandise#Transformers Gum|Soundwave]] <ref>[http://fuwakudou.web.fc2.com/prisoners06.html One source] mentions obtaining two boxes of the ToonTown ''Transformers Gum'' releases with each containing two kits - the one numbered #1 featuring Optimus Prime and Soundwave and the one numbered #2 featuring Sideswipe and Starscream - but considering that none of the other (albeit admittedly very few) sources that discuss these kits mention a similar arrangement, it is possible that this was either a packing mistake or simply already-opened boxes being sold on the secondary market with two loose kits stuffed into them (the article does not specify whether or not the boxes they obtained were sealed, although they do look new-ish in the provided pictures). Still, considering how very little information exists regarding these releases in general, it will nonetheless be noted here that these kits ''might'' have been released as 2-packs at some point.</ref>), looking mostly identical save for a set of cheaper-looking paper decals.
{{-}}

[[File:Tfgum2010 g1prime.jpg|thumb|upright=1.66|My limbs need to be horribly mutilated and rearranged to change forms!]]
*'''Convoy''' (2010)
**''Accessories:'' Ion blaster
:The first wave of 2010's revival of the ''Transformers Gum'' series served up a double dose of Prime, beginning with this new model kit of the original Generation 1 version of the character. Sculpted from white, red, and blue plastic, the kit features a positively ''ungodly'' amount of stickers to make it look presentable and comes with Prime's traditional ion blaster weapon, which stores on the rear of his cab in vehicle mode.

:In terms of transformation, Convoy partially [[partformer|partforms]], as the forearms are needed to be removed and attach it back during conversion.
{{-}}

[[File:Tfgum2010 henkei prime.jpg|thumb|upright=1.66|So do mine!]]
*'''Convoy''' (2010)
**''Accessories:'' Smokestacks/laser cannon
{{toydesigner|[[Naoto Tsushima]] (packaging artist)}}

:The second Prime figure in the 2010 ''Gum'' line was this kit of his ''[[Transformers: Classics|Classics]]''/''[[Henkei! Henkei! Transformers (franchise)|Henkei! Henkei!]]'' body. As with the Generation 1 model, this figure is made from white, red and blue plastic and uses ''lots'' of stickers. It comes with the ''Classics''' figure's transforming smokestack/laser cannon weapon.

:Much like his aforementioned G1 self, his arms also need to be partformed into robot mode.
{{-}}

[[File:Tfgum2014_g1starconvoy.jpg|thumb|upright=1.66|But not mine!]]
*'''Star Convoy''' (2014)
**''Accessories:'' Cannon, Roller/ treads, car mode Hot Rodimus

:Released as part of the 8th wave of Kabaya's 2009 series of standard model kits, Star Convoy is a snap-together model kit that can transform into a futuristic big rig. Like the full-sized Star Convoy toy, this model kit can assume a battle station mode and also includes a diminutive and non-transformable Hot Rodimus in car mode that can interact with the base mode ramps. Like most other Kabaya model kits, Star Convoy has no paint applications and relies on stickers for added details.

:Owing to the original toy's simple engineering, Star Convoy does not require any disassembly to transform into robot mode, making him one of the few non-partforming Kabaya figures. He does, however, need to have his Microcarrier wheel base detached (which was also an option on the original toy) to fully access a significant improvement over his older self: some newly-added leg articulation! The Microcarrier also doubles as a shield that can be attached to the robot's left arm.
{{-}}

==Hero Set==
*'''Convoy''' (1985)
**''ID number:'' '''01'''
**''Accessories:'' Laser rifle
:A large ''keshigomu'' of Optimus Prime was produced by TakaraTomy licensee [[Maruka Toys]]. Packaged on a blister card, the static, unposeable Prime figure came with a removable laser rifle, and featured a few small stickers for colour and detail. Maruka also produced a Megatron figure in the same scale, and both Prime and he were available in red, yellow or green.
{{-}}

==Decoy==
[[File:Decoy optimus prime.jpg|thumb]]
*'''Cybertron Hero Collection 22''' (multi-pack, 1986)
*'''Defeat Trypticon Strategy Game''' (board game, 1986)
:Optimus Prime was among the many characters rendered by [[TakaraTomy|Takara]] as part of their series of 1.5" ''keshigomu'' figurines. Like all the Autobots in the series, Prime was molded in soft red rubber, and featured a number sculpted into his back that was the sum total of his [[Tech Spec]]s, for use in the various games that could be played with the figurines. Prime was available as part of a 22-piece box set of Autobot figures, as a playing piece in the Defeat Trypticon Strategy Game, and later, in a peach coloration randomly packed as part of various other box sets.

*'''Optimus Prime''' (1987)
**''Checklist number:'' '''31'''
:The Prime figurine was later brought over to [[Hasbro]] markets as part of the "[[Decoy (G1)|Decoy]]" promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (31, in Prime's case). Like all Autobot Decoys, he was a randomly-chosen pack-in available with the carded [[Throttlebot]]s, [[Aerialbot (G1)|Aerialbots]], [[Protectobot (G1)|Protectobots]] and [[Technobot (G1)|Technobots]].

::*''[http://www.tfu.info/1986/Autobot/Decoys/OptimusPrime/optimusprime.htm More information on Decoy Optimus Prime at TFU.info]''
{{-}}

==Knitting Pattern==
[[File:Transformers-knitting-pattern.JPG|thumb|Here to transform your sweater into something that will get your ass kicked.]]
*'''Wendy DK 3015''' (1986)
: Produced by U.K. company [[Wendy DK]] and designed by [[Joy Gammon]], this pamphlet contained patterns for two ''Transformers''-themed sweaters, one featuring Optimus Prime in robot mode, one featuring Optimus Prime in vehicle mode. The patterns were sized as Children's Large, so you're going to have to upscale it quite a bit if you want your <s>girlfriend</s> mom to knit you one.
{{-}}

==Vinyl figurine==
[[File:Optimus Prime Vinyl Figure set.jpg|thumb|upright=1.66|Vinyl Prime leads his decoys into battle [[Action Master|before the great storm]].]]
*'''Scramble Gun Set''' (1986)
**''Japanese ID number:'' '''Part.1'''
:Optimus Prime was one of several characters released by [[Seven]] and Takara as large vinyl figurines in a variety of different novelty sets. Prime came packaged with a roleplay pistol (the titular "Scramble Gun"), an Autobot badge, and four randomly assigned peach-colored decoy figures. In [[Ultra Magnus (G1)/merchandise#Vinyl figurine|"Part.2"]] of the set Prime is replaced by a vinyl Ultra Magnus.{{-}}

==Gold Convoy Trophy==
[[File:Gold Convoy Trophy.jpg|thumb|Thou will worship this golden convoy. Or Perish!]]
*'''Optimus Prime''' (trophy, 1988)
:A gold chrome trophy in the likeness of Optimus Prime was given as an award to an unknown number of distinguished [[TakaraTomy|Takara]] employees and as a [[Lucky Draw figure|Lucky Draw]] (alongside the [[Chromedome (G1)|Silver Chromedome Trophy]]) in [[TV Magazine]] in 1988. The two different releases have different plaques but appear to be otherwise identical. If you're an Optimus Prime merchandise completist, good bloody luck finding this one.
{{-}}

==''Generation 2''==
*'''Optimus Prime''' (Dairy Queen promotion, 1994)
[[File:DairyQueen Optimus.jpg|thumb|Rare, in a raw chicken sort of way.]]
:Released in Dairy Queen's 'Kid's Pick-Nic!' meals in 1994, this hunk of red and blue plastic is the first known Optimus Prime kids' meal toy and also probably the worst, sporting no transformation and zero articulation of any sort, with an included sticker sheet for detailing that doesn't particularly resemble any iteration of the character.

:These can be pretty hard to find, owing to their limited distribution compared to the average fast food promotion. Being pretty forgettable as toys probably didn't help either, if we're being honest.
{{-}}

*'''Optimus Prime Inflatable Bop Bag'''
[[File:OptimusPrime_G2_Inflatable_Bop_Bag.jpg|thumb|At last, merchandise for Decepticons!]]
:Released in 1993 by Kid Dimension, a subsidiary of Hasbro,<ref>[http://www.fundinguniverse.com/company-histories/hasbro-inc-history/]</ref> this 3 foot tall Inflatable Bop Bag featured the likeness of Optimus Prime above the Transformers Generation 2 logo. Supposedly to encourage kids to punch out Optimus Prime?
{{-}}

===ToonTown===
{{note|There's a longstanding debate on whether the obscure Korean-exclusive [[ToonTown]] figures and merchandise, allegedly released under official Hasbro licensing according to their packaging, are actually legitimate Transformers products or just bootlegs with fraudulent copyright information. Although there isn't a clear consensus from collectors and no statement from Hasbro on this matter as of {{CURRENTYEAR}}, we have nonetheless chosen to cover them here for the sake of archival and posterity.}}

[[File:Midam-Prime.jpg|thumb|upright=1.66|Maybe a licensed product, maybe a bootleg. Maybe it's in our definition of "toy," maybe it's "merchandise." ToonTown needs a {{w|Eddie Valiant|detective}}!]]
{{anchor|MidamIndustry}}
<ul class="iconlist">{{Bp-a2|'''Optimus Prime''' (Model kit, 1997)}}</ul>
:*''Accessories'': Blaster, left & right fists
: Notoriously odd [[South Korea]]n company ToonTown licensed the ''Transformers'' brand to model kit manufacturer [[ToonTown#Items released by Midam Industry|Midam Industry]], which in turn put out this surprisingly detailed and robust kit of the original Generation 1 Optimus Prime figure. It is fully transformable and about 3/4ths the size of the original toy. He does not feature his trailer, and his weapon design is substantially different from either of his classic blasters.

: Three color morphs have been found so far: original red arms and torso with blue head and legs, a mirrored version with red head and legs and a blue torso and arms, and one with all the aforementioned parts in blue.<ref>Reviews for a [https://m.blog.naver.com/eoiipp/130144214329 "standard"-colored Midam Optimus kit], an [https://blog.naver.com/parang16/20041871808 "inverted"-colored Midam Optimus kit], and an [https://blog.naver.com/nckim/70101680088 all-blue-colored Midam Optimus kit] on blog.naver.com</ref> This suggests that the colors which make up the two batch of parts might be randomized between blue and red, and as such; an as-of-now undocumented all-red version might also exist. All of his versions also have their chrome parts painted in metallic gold, a common oddity across ToonTown Primes as seen in the previous LALA figure.

: The figure comes with a batch of rather weird stickers, with text on his license plate and the sides of his truck mode that refers to him as "[[gbwiki:Dump Robo|Dump Robo]]".
{{-}}

[[File:LALA-PrimePencilCase.jpg|upright=1.66|thumb|Pope Leo XIV might have been selected on the
day that this image was uploaded, but pencil case Optimus might be the holiest thing that I've seen all day, hahaha... I'm going to hell, aren't I?]]
*'''LALA Pencil Case''' (1997)
:Possibly one of the most majestically quirky pieces of merchandise to have graced any Transformers character ever, this incredible pencil case from ToonTown licensee [[ToonTown#Items released by LALA|LALA]] is generally based around the design and transformation of the original Generation 1 Optimus Prime toy, but with ''a lot'' more than meets the eye to it: on top of being fully transformable from his robot mode to (an albeit rather flat) truck mode, he folds open to reveal space for the storage of several pencils and/or pens of your choosing, as well as including printed stickers for a time table and an address book, a drawer for the storage of extra school supplies, and a hidden thermometer that's revealed by lowering his head!

:Pencils can be attached to his shoulders to imitate his smokestacks, and his fists, which are removable for the transformation like in the original toy? They're erasers! Gah, how can an obscure, maybe even potentially fake piece of merchandise from 1990s South Korea have this much soul and creativity put into it! The fists can even be stored below the truck's front portion in vehicle mode, guaranteeing that you never lose them.

:He also includes a sticker sheet and a small 20cm ruler, featuring packaging art of himself plus ''Generation 2'' [[Megatron (G1)|Megatron]], [[Sideswipe (G1)|Sideswipe]], and [[Ramjet (G1)|Ramjet]], as well as pictures of their respective LALA eraser versions (the one for Optimus coming right up).
{{-}}

*'''Eraser''' (1997)
:Another piece of merchandise from ToonTown licensee LALA, this eraser also doubles as a small simple model kit, with his large colored bits being the "eraser" portion and the remainder of the toy being constituted of grey plastic parts that are assembled together. He transforms from robot to vehicle and back by [[Partformer|partforming]] his individual components.

:Although the advertisements and aforementioned ruler (as well as the few copies that we know of) feature his eraser bits in pink, it is possible that he might have also been released in bright green, as other LILA erasers that also show up as pink in promotional images have been found with this color instead.
{{-}}
*'''Watch''' (1997)
:Yet another LALA product, this Optimus Prime watch "transforms" by folding out of its compressed half-form and standing up as a simple fully-fledged little robot. His chest opens to reveal the titular watch. Said chest, along with his head, have an unusual gold chrome deco (a commonality across a handful of ToonTown products), and the box art is painted accordingly to reflect this.
{{-}}

==''Metalforce''==
[[File:MetalforceConvoy.jpg|thumb|I'm expensive! ''(Metallic Version Pictured)'']]
*'''Convoy''' (1999/2000)
**''Japanese ID number:'' '''MFC-01'''
**''Accessories:'' Ion Blaster, Autobot Matrix of Leadership, alternate hand, unpainted rifle, Matrix, helmet and hand

:''Metalforce'' Convoy is a large vinyl figurine produced by [[Time House]] sculpted to very closely resemble Optimus Prime as he appeared in the original television series, and at the time was the most accurate product depiction of Optimus Prime's cartoon appearance.

:The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his [[Matrix of Leadership/toys|Matrix of Leadership]], as is a ''[[The Transformers: The Movie|Movie]]''-style Matrix cover (not pictured). He also comes with an alternate hand that allows him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands, and helmet, which probably meant for those who wanted to duplicate them with resin and/or wish to modify/paint them...you know how garage kit modellers do.

:Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colors of the actual series, and a metallic-paint version (pictured), which is less [[show-accuracy|show-accurate]] but more shiny. The plain-colors version was the first release and have an Autobot symbol tampograph on his shoulder as per [[The Transformers (cartoon)|the cartoon]], while the later metallic-finish version instead came with a decal sheet.

{{-}}

==''Choro-Q''==
*'''Convoy''' (2000)

:''[[Choro-Q]]'' Convoy is a [[redeco]] of the Domra Truck toy from Takara's ''Choro-Q'' toyline of non-transforming [[super deformed]] vehicles. He was an [[exclusive]] at [[BotCon]] Japan 2000, and features a [[pull-back motor]] and a rear license plate that reads "BotCon Japan 2000".

:Along with ''Choro-Q'' [[Mirage (G1)|Ligier]] and [[Megatron (G1)/toys|Megatron]], Convoy was given out randomly to convention attendees. Each toy was limited to 1000 pieces.

==Super Collection Figure==
[[File:SCF Optimus.jpg|upright=1.66|thumb|#IGotPrimeOnIt]]
*'''Convoy''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

: A three-inch tall [[plastic|PVC]] figurine of Optimus Prime was available as part of the first wave of [[TakaraTomy|Takara]]'s ''[[Heroes of Cybertron (toyline)|Super Collection Figure]]'' line. Like all the figures in the wave, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve [[blindpacking|blindpacked]] figures.

{{-}}{{anchor|SCFaxe}}
[[File:SCF Optimus chase axe.jpg|upright=1.66|thumb]]
*'''Convoy with Ax''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

:Also available in the first ''Super Collection Figure'' wave was a rare "Secret Figure" version of Optimus (斧付きコンボイ, ''ono-tsuki konboi''), decorated in metallic paint and replacing his gun-wielding right hand with his [[energon-axe]].

: It was ''presumably'' released at a ratio of one per every ten cases; while this has not been officially confirmed, later waves gave these odds for Secret Figures.

{{-}}{{anchor|SCFtrailer}}
[[File:SCF Optimus Truck.jpg|upright=1.66|thumb|We're just as confused as you are, folks.]]
*'''Convoy (Trailer Mode)''' (2000)
**''Act'': '''2'''

:Part of the second ''Super Collection Figure'' act, this is the only ''SCF'' figure of a vehicle mode Transformer. As with the previous non-chase Prime figure, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve blindpacked figures.

: Unlike every other figure in the line (excluding build-a-figures), this one does ''not'' come with a figure stand, because... well, what would be the point?

{{-}}{{anchor|SCFMegaGun}}
[[File:SCF Optimus chase jetpack.jpg|upright=1.66|thumb]]
*'''Megatron & Convoy''' (2000)
**''Act'': '''2'''
**''Accessories'': Stand

:The second ''Super Collection Figure'' wave, like the first, also had its own Optimus Prime chase figure, this one wielding Megatron in gun mode and wearing [[Sideswipe (G1)|Sideswipe]]'s [[jet pack|rocket pack]], as seen in the [[The Transformers (cartoon)|original ''The Transformers'' cartoon]] episode "[[More than Meets the Eye, Part 3]]".

: This was presumably also released at a ratio of one per every ten cases.

{{-}}{{anchor|SCFdamage}}
[[File:SCF Optimus chase damage.jpg|upright=1.66|thumb]]
*'''Damaged Convoy''' (2001)
**''Act'': '''3'''
**''Accessories'': Stand

:There was no mass-release Optimus Prime figure for the third ''Super Collection Figure'' act, but there was another rare chase figure, this time a battle-damaged version of the original figure from the first act, referencing his injuries from ''[[The Transformers: The Movie]]''.

: Again, it was ''probably'' released in one out of every ten cases. He replaced the clear version of [[Bumblebee (G1)/merchandise#Super Collection Figure|Bumblebee]] in the case.

{{-}}{{anchor|SCFcom}}
[[File:SCF Optimus Comm.jpg|upright=1.66|thumb|He's actually checking his makeup.]]
*'''Convoy (B)''' (2001)
**''Act'': '''4'''
**''Accessories'': Stand

:For the fourth ''Super Collection Figure'' wave, Prime was rendered weaponless, speaking into the open communication panel on his left arm. Like all the figures in the fourth wave, Prime was available in both standard full color and metallic silver "pewter" versions, one of each of which was available in a standard case of twelve blindpacked figures.

: Care should be taken when moving the joints of the pewter version, as is not uncommon for the connector pegs to have gotten painted as well, resulting in stuck limbs and tearing joints. Shaving the interior of the socket slightly with a hobby knife is usually sufficient to relieve the issue. (This holds true for all other pewter figures on this list, and in fact the entire dang line from here on.)

: In eight out of every ten cases, the pewter version of Prime came packaged with the left arm of the collectible [[Metroplex (G1)#Super Collection Figure|Metroplex]] build-a-figure; these parts were either in full color or clear-plastic, packed at an equal ratio of four out of eight cases.

{{-}}{{anchor|SCFSilverMatrix}}
[[File:SCF Optimus chase silver.jpg|upright=1.66|thumb]]
*'''Convoy''' (2001)
**''Act'': '''5'''
**''Accessories'': Stand

:This version of Prime was a chase figure in the fifth ''Super Collection Figure'' act, and depicts the Autobot leader, rendered in metallic silver, opening the Matrix, referencing the end of "[[The Return of Optimus Prime, Part 2]]". This figure was packed in at a ''confirmed'' ratio of one per every ten cases.

{{-}}{{anchor|SCFMegatrongun}}
[[File:SCF Optimus Act6.jpg|upright=1.66|thumb|Shadow the Convoy, ow the edge.]]
*'''Convoy (C) with Megatron Gun Mode''' (2002)
**''Act'': '''6'''
**''Accessories'': Extra right fist, stand

:The sixth ''Super Collection Figure'' wave featured yet another mass-release version of Optimus. While this Optimus is wielding Megatron (using the same mold as the chase figure from the second Act), he has entirely new-mold arms, plus an interchangeable empty right fist. On top of that he was extensively redecoed: he's actually cast in different shades of light salmon plastic and heavily painted over in an overall darker, less saturated scheme, his normally-white parts now in medium-gray. His pec-windows are painted with a weird shiny dark blue that gives them a translucent look. The figure was available in both full color and pewter versions in an equal ratio.

: In eight out of every ten cases, the pewter version came with the head for the wave's [[Grand Maximus#Super Collection Figure|Grand Maximus]] build-a-figure, packed at a ratio of six color parts to two pewter per case.

{{-}}{{anchor|SCFStarConvoy}}
[[File:SCF Optimus Star Convoy.jpg|upright=1.66|thumb|Chonktimus Prime.]]
*'''Star Convoy''' (2002)
**''Act'': '''8'''
**''Accessories'': Stand

:After taking a break for the seventh wave, Prime returned for the eighth ''Super Collection Figure'' wave, which would prove to be the final Generation 1-themed set of figures. This figure of Prime in his Star Convoy body was available in both full color and pewter versions in an equal ratio.

:In eight out of every ten cases, the colored version came with the right arm for the wave's [[Scorponok (G1)#Super Collection Figure|Scorponok]] build-a-figure; this part could be in either full color or pewter, at a 4:4 ratio.

{{-}}{{anchor|ConvoySet}}
[[File:SCF Optimus Earth Obliteration.jpg|thumb|upright=1.66]]
*'''Special "The Earth Obliteration Plan": Exclusive Convoy Set''' ([[February 3|Feb 3]] 2002)
**''Accessories'': Stand

:Available exclusively at the Wonder Festival convention, this set includes two metallic-paint versions of Convoy figures from Act 2: the "Convoy w/ Megatron Gun" chase figure (minus the jetpack), and the truck-mode "figure".

: The set was limited to only 1000 units.

{{-}}{{anchor|ConfrontationSet}}
[[File:SCF Optimus Confrontation.jpg|thumb|upright=1.66]]
*'''TF Confrontation Set 01: Convoy vs Megatron''' ([[September 20|Sept 20]]-[[September 22|22]], 2002)
**''Accessories:'' Energon-axe

: Exclusive to the Tokyo Game Show 2002, this special set includes a new version of the original first-Act Optimus Prime figure, along with a new version of the first-Act Megatron. Both are cast in transparent plastic and completely painted over in a grimy, battle-damaged look. Both also come with the interchangeable energon-axe and mace weapons from their first-wave chase figures. Completing the theme of the set is the backdrop of the packaging interior, which depicts [[Sherman Dam]].

: Curiously, Optimus features the larger, rounded-off antennae of the [[Hasbro]] ''Heroes of Cybertron'' version of the mold, which was in production/circulation about the same time.

: As with the above Wonder Festival set, this set was also limited to 1000 units.
{{-}}
==Mega Super Collection Figure==
{{anchor|MSCF}}
*'''Convoy TV Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
*'''Convoy Metallic Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
{{-}}

==''Heroes of Cybertron''==
[[File:HOC Optimus.jpg|upright=1.66|thumb|Hey Spike, pull my finger.]]
*'''Optimus Prime''' (2002/2006)

: Part of the first wave of Hasbro's ''[[Heroes of Cybertron (toyline)#Heroes of Cybertron|Heroes of Cybertron]]'' series, Optimus is a [[redeco]] of the standard ''Super Collection Figure'' Optimus mold, with a ''slight'' [[retool]]ing to give him longer, thicker, rounded-off helmet antennae [[for safety reasons]]. Like all the standard ''Heroes'' figures, he is cast in transparent plastic, then painted over, save for the eyes and a small patch on the back of his head, giving him a [[light-piping]] gimmick. There are a few other small deco differences to the ''Heroes'' version, such as his helmet crest changing from white to gray.

: Optimus was re-released in 2006 as part of a short-lived ''Heroes of Cybertron'' revival, celebrating the 2006 DVD release of the original ''[[The Transformers: The Movie]]''. Cast in solid-white plastic rather than translucent blue, this makes him ''very'' similar to the original ''SCF'' toy, but he retained the thicker antennae, plus got some very minor paint changes on the head: his crest-vent went back to white, and oddly his eyes are white too, rather than the ''SCF'' version's chest-window light blue.

::*''[http://www.tfu.info/2002/Autobot/HoCOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime at TFU.info]''

{{-}}{{anchor|HOCApex}}
[[File:HOC Optimus Apex.jpg|upright=1.66|thumb|Don't tell anyone, but this crap is HEAVY!]]
*'''Powermaster Optimus Prime Apex Armor''' (2002)

: An unexpected addition to the line, especially in the first wave next to another Optimus (see above), "Apex Armor" Optimus is a [[redeco]] of [[Ginrai (robot)#Super Collection Figure|God Ginrai]], the double-armored-up form of Optimus's ''[[Fight! Super Robot Lifeform Transformers (franchise)|Super-God Masterforce]]'' lookalike [[Ginrai (robot)|Ginrai]]. There are a few small paint differences between God Ginrai and Apex Armor Prime (beyond the obvious "opaque vs clear-plastic base figure" thing, we mean), most notably that the many parts on God Ginrai that are darker unpainted gray plastic, like the thighs and side-panels/guns on the lower legs, have been painted the same light gray as the chest on Optimus.

: This is the first Hasbro-release depiction of Optimus in this mode, later backed up with the release of the full-fledged toy of [[Optimus Prime (G1)/toys#PMOP|Powermaster Optimus Prime]] with [[Apex Bomber]] the following year.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeApexArmor/optimusprime.htm More information on ''Heroes of Cybertron'' Powermaster Optimus Prime Apex Armor at TFU.info]''

{{-}}{{anchor|HOCaxe}}
[[File:HOC Optimus Axe.jpg|upright=1.66|thumb|Energon Axe: Only used in [[More than Meets the Eye, Part 2|one episode]]. Ever.]]
*'''Optimus Prime''' (2002)

:This second-wave ''Heroes of Cybertron'' release is a variation of the chase figure from the first ''Super Collection Figure'' wave, depicting Prime with his right hand replaced with his energy axe. This figure is a little different from its Japanese progenitor (beyond the "clear-plastic painted over" deal, of course), being painted in normal matte/gloss rather than metallic paint, and replacing the left "pointing" hand with the clenched fist of the later "communicator" version of Optimus. It also retains the ''Heroes'' molding alterations to Optimus's helmet.

: Oddly, he comes with the same collector card as the first version, and the packaging does not call out the energy weapon in any way. The card-back cross-sell even shows only the original Optimus. (The same happened to this wave's energy-weapon-wielding [[Megatron (G1)/merchandise#Heroes of Cybertron|Megatron]].)

::*''[http://www.tfu.info/2002/Autobot/HoCAxeOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Plasma Weapon at TFU.info]''

{{-}}{{anchor|HOCSpark}}
[[File:HOC Optimus Spark Attack.jpg|upright=1.66|thumb|This can't be [[Spark attack|Spark Attack]]! His is so energetic that... he BURNS.]]
*'''Powermaster Optimus Prime Spark Attack''' (2002)

: In a yet another unusual choice for the line, this second-wave figurine is a redeco of the first God Ginrai/Powermaster Prime Apex Armor PVC figure, cast in translucent orange plastic with red gradients and flame detailing, depicting a "spark attack" mode.

: This is a variant of the ''Super Collection Figure'' "God Fire Guts" God Ginrai chase figure, which had been rendered entirely in solid metallic gold paint.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeSparkAttack/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime Spark Attack at TFU.info]''

{{-}}{{anchor|HOCComm}}
[[File:HOC Optimus Comm.jpg|upright=1.66|thumb|You won't believe where I'm calling you from!]]
*''' Optimus Prime with Communicator''' (2003)

:This fifth-wave ''Heroes of Cybertron'' figure is a release of the Prime figure from the fourth ''Super Collection Figure'' wave, depicting a weaponless Prime talking into the communicator in his left arm. He retains the helmet alterations of the previous versions of the figure.

: This toy also came with the head and weapons for the wave's collectible [[Metroplex (G1)#Heroes of Cybertron|Metroplex]] build-a-figure.

::*''[http://www.tfu.info/2003/Autobot/HoCCommunicatorOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Communicator at TFU.info]''

{{-}}

==Hard Hero==
[[File:HardHero OptimusPrime bust.JPG|thumb|upright=0.85]]
*'''Optimus Prime''' (Bust, 2002)

: Optimus Prime was the first ''Transformers'' bust released by [[Hard Hero]]. He is approximately six inches tall at the head (8.5 at the gun) and is made out of cold-cast porcelain. There were also a version of the bust signed by the sculptor, limited to 100 samples.

{{-}}

[[File:HHero OptimusStatue.jpg|thumb|Not there. There!]]
*'''Optimus Prime''' (Full figure statue, 2003)

:Hard Hero also created a 13-inch tall Optimus Prime statue. It is sculpted pointing with his left hand while holding his ion rifle in his right.

{{-}}

==MyClone==
[[File:Prime-Myclone.jpg|upright=1.67|thumb]]
*'''Optimus Prime (2003)'''
**''Japanese ID number:'' '''MFT001''' and '''MFT006'''
**''Accessories:'' Display base
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

: Optimus Prime was released three times in the [[MyClone]] line, all in the first wave of toys. He was released in both robot and truck mode, while a clear Optimus in robot mode was one of two chase figures along with a clear Megatron.
{{-}}

==Generation 1 Figure-Collection==

[[File:Bottlecap prime gun.JPG|thumb]]

*'''Convoy (gun)''' (2003)
**''Japanese ID number:'' '''C-1'''
**''Accessories:'' Display base

:At only one inch in height, this Optimus "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's Transformers [[Generation 1 Figure-Collection]]. The figure was rendered in both a standard "retro" black and white color scheme, and [[:File:Bottlecap chase prime.jpg|a rare full-color]] [[chase figure|chase]] version, and came with a leaflet, personalized with cartoon screen captures.
{{-}}
[[File:Bottlecap prime pointing.JPG|thumb]]
*'''Convoy (pointing)''' (2003)
**''Japanese ID number:'' '''C-2'''
**''Accessories:'' Display base

:The second Prime figure in the Generation 1 collection was much like the first, only sculpted with an empty hand, pointing off into the distance like a lot of Optimus Prime figures are wont to do.
::*''[http://snakas.web.fc2.com/misc_item/kabaya_bottle.htm More information on the Bottlecap Collection at Autobase Aichi]''

{{--}}

==KT Figure Collection==
[[File:Optimus_Prime_KT.jpg|upright=1.66|thumb|Thanks for helping me... [[City of Steel (episode)|pull myself together.]]]]
*'''Convoy''' (KT Figure Collection, 2004)
: This figure was designed by [[Yuki Ohshima]] and produced by [[KT Figure Collection]]. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in ''[[The Transformers: The Movie]]''.

{{-}}{{anchor|KTFCRevival}}
[[File:Optimus_Prime_ex_KT.jpg|upright=1.44|thumb|No, I am [[redeco|NOT]] [[Ultra Magnus (G1)|Ultra Magnus]]! I'm silver, not [[:File:Magnuslongshot.jpg|white]]]]
*'''Convoy "Revival version"''' (''[[Figure Ō]]'' exclusive, 2004)
: The 82nd issue of the hobby magazine ''[[Figure Ō]]'' came with a [[redeco]] version of Optimus Prime's mini bust. It is painted completely silver, making him appear to be coated with the special alloy from "[[The Return of Optimus Prime, Part 2]]".

{{-}}

==Palisades==
[[File:Palisades WarWithinPrime.jpg|thumb]]
*'''The War Within Optimus Prime''' ([[Palisades Toys|Palisades]], 2005)

:'''The War Within'' Optimus Prime is a six-inch-tall polystone mini statue based on his appearance in the popular [[War Within (franchise)|''War Within'' comic book series]]. Prime stands on a silver Autobot-insignia stand, is decorated with dirt to simulate battle damage, and has articulation in his head and arms. The statue was limited to 1500 pieces worldwide.

{{-}}

==''Titanium Series''==
[[File:TitaniumRMWWPrime.jpg|thumb|Descend, Squattimus Prime.]]
*'''War Within Optimus Prime''' (3" Robot Masters, 2006)
**''Accessories:'' Ion Blaster, display stand

: ''War Within'' Optimus Prime is the second toy representation of Optimus Prime as he appears in ''War Within''. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

: He is squat. Very squat.

{{-}}
{{anchor|TitaniumG1}}
[[File:TitaniumRMG1Prime.jpg|thumb|Drop and give me twenty, soldier!]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand

: The first Titanium representation of G1 Optimus Prime has a well-proportioned sculpt based on his 20th Anniversary toy. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

{{-}}
{{anchor|TitaniumG1BattleDamage}}
[[File:TF-Titanium-Series-3-inch-Robot-Masters-Battle-Damaged-Optimus-Prime.jpg|thumb|"Drop dead and give me 20!"]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand
: This is a repaint of the 3" G1 Optimus Prime titanium figurine, with a 'battle-damaged' deco.
{{-}}{{anchor|tit2pack}}
[[File:Titanium-Series-Optimus-Prime-and-Bumblebee-2pack.jpg|thumb|"You! YOU STOLE MY LAST CESIUM SALAMI!"]]
*'''Optimus Prime & Bumblebee''' (2-pack, 2007)
**''Accessories:'' Ion Blaster, display stand
: A Toys 'R' Us [[exclusive]] two-pack, this set features "Supermetal Finish" (read: shiny) versions of the "Robot Master" ''Titaniums'' Optimus Prime and Bumblebee.

{{-}}

==First 4 Figures==
[[File:First 4 Figures Battlefield Optimus vs Megatron.jpg|thumb|upright=1.66]]
*'''Optimus Prime vs Megatron''' (2006)
**''Accessories:'' extra head for Megatron (with detachable helmet), extra hand for Optimus Prime
{{toydesigner|[[Little IroN]] (concept artist), [["Mad" Alterton]] (sculptor), [[Leandro Sivori]] (painter)}}

:The first entry in the ''Transformers Battlefield'' line by model company [[First 4 Figures]], this 13-inch tall diorama depicts Optimus Prime slugging it out with Megatron. Optimus is posed as though doing a shoulder shove while holding his ion blaster, but a provided "REP" (Replaceable Exterior Part) hand allows buyers to instead recontexualise the pose as a spinning backhand slap. Megatron comes with a REP of a battle damaged version of his head, which features a detachable "helmet" to show off his exposed robo-brain.

:The model was limited to 1,850 pieces worldwide, and came with a numbered certificate of authenticity, which allowed buyers to reserve the same number on their next purchase in the series. It also came with an A4 mini-poster depicting the same fight between Optimus and Megatron by artist [[Little IroN]], which was also sold separately as a limited edition A2 poster.

:As a ''Transformers Battlefield'' release, this model featured a detailed base designed to interlock with others in the same range to create a massive battle diorama. Unfortunately, a general discontinuation of First 4 Figures' ''Transformers''-related output put the kibosh on any further ''Battlefield'' models.

{{-}}{{anchor|F4F1}}
[[File:SnakeEyes OptimusPrime statue.jpg|thumb|upright=1.66|Get with the program.]]
*'''Optimus Prime and Snake Eyes''' (<s>2006</s> unreleased)

:Initially announced at UK Toy Fair in 2006<ref>[https://news.tfw2005.com/2006/01/25/first4figures-beast-wars-and-transformers-vs-g-i-joe-statuesbusts-4267 "First4Figures Beast Wars and Transformers VS. G.I. Joe Statues/Busts"] at TFW2005.com</ref> with a second showing at New York [[Toy Fair]] the following month,<ref>[https://tformers.com/transformers-/5568/news.html "Toy Fair 2006 - First4Figures TF & GI Joe Statues& Busts"] at tformers.com</ref> "Optimus Prime and Snake Eyes" was intended to be one of the first releases in First 4 Figures' ''[[G.I. Joe vs. the Transformers]]'' comic tie-in subline. This 8-inch tall bust depicted a one-armed Optimus Prime in the [[Cobra]] [[H.I.S.S. tank|HISS tank]] body he used in that series holding a battle-ready [[Snake-Eyes#First 4 Figures|Snake Eyes]], directly recreating the cover to the [[G.I. Joe vs. the Transformers issue 1|first issue]] of the comic (originally drawn by [[Mike S. Miller]]).

:Unfortunately, this statue was a casualty of F4F's discontinuation of ''Transformers'' product, the result of a challenging marketplace and lack of retailer interest.
{{canceledtoy}}

{{-}}{{anchor|F4F2}}
[[File:StormShadow OptimusPrime statue.jpg|thumb|upright=0.85|Hey, Private Haircut! I might have taken a bit too much off...YOUR HEAD!]]
*'''Optimus Prime vs Storm Shadow''' (2007)
{{toydesigner | [[Siamak Roshani]], [[Joel Chen]] (sculptors)}}
:The third reveal in the ''G.I. Joe vs. the Transformers'' series, this statue is 7.5 inches tall and depicts [[Storm Shadow#First 4 Figures|Storm Shadow]] in a victorious stance on Prime's damaged, disembodied head, based on the cover of [[G.I. Joe vs. the Transformers issue 5|''G.I. Joe vs. the Transformers'' issue 5]] (also by Miller). Storm Shadow is only a mite bigger than your standard 3.75" ''G.I. Joe'' figure, making this statue roughly in scale with the rest of your collection!

:After being revealed at [[San Diego Comic-Con]] in 2006,<ref>[https://tformers.com/ig.php?mode=album&album=6265&dispsize=800&start=0 Tformers.com's SDCC 2006 gallery]</ref> "Optimus Prime vs Storm Shadow" was released in January 2007, holding the dubious honour of being the only one of First 4 Figures' ''G.I. Joe vs. the Transformers'' range to see release. The statue was limited to 250 pieces in the U.S., and 250 pieces in the UK.

::*''[https://www.yojoe.com/archive/statuary/stormshadowprime/ More information on Optimus Prime vs Storm Shadow at YoJoe.com]''

{{-}}

==Diamond Select==
[[File:Optimus Prime Mini-bust.jpg|thumb|"I can't roll out without my legs installed!"]]
*'''Optimus Prime''' (Diamond Select, 2007)
:A mini-bust of Optimus Prime based on his appearance in the comic was released by [[Diamond Select Toys|Diamond Select]] in 2007. The figure includes the upper body of Optimus Prime, carrying his laser rifle and posed as if preparing to charge. The Matrix of Leadership is sculpted into the base of the statue.

{{-}}
[[File:Ark Globe.jpg|thumb]]
*'''Autobot Snow Globe''' (Diamond Select, 2007)

:Optimus Prime is also featured in Diamond Select's Autobot-themed snow globe, posing above a [[Mount St. Hilary]] base which also features the ''[[Ark (G1)|Ark]]'' and [[Omega Supreme (G1)|Omega Supreme]]. The globe was sculpted by [[Art Asylum]].

{{-}}

[[File:DST08 FinalBattlePrimeBust.jpg|thumb|Hold this for a moment won't you.]]
*'''Final Battle Optimus Prime''' (Diamond Select, 2008)
:Final Battle Optimus Prime was exclusive to the online retailer Action Figure Xpress. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and limited to 1000 pieces. Optimus Prime is shown after his climactic battle with Megatron during Transformers: The Movie; shortly before he passed the Matrix of Leadership (which is also removable here) to Ultra Magnus. His base features the life support readout that monitored both his declining health and eventual death.

{{-}}

{{anchor|G1AnimatedOptimusPrimeBust}}
[[File:DST SDCCToonPrimeBust.jpg|thumb]]
*'''G1 Animated Optimus Prime''' (Diamond Select, 2008)
:G1 Animated Optimus Prime was exclusive to the 2008 San Diego Comic Con. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and features a more matte color scheme to better match the cartoon's palette.

{{-}}

[[File:DiamondSelect PowermasterOptimus.jpg|thumb|"It's not great to be back."]]
*'''Powermaster Optimus Prime''' (Diamond Select, 2010)

:This fourth Optimus Prime bust was to be based on his [[Powermaster]] incarnation, but appears to have been canceled.

{{canceledtoy}}

{{-}}
[[File:DiamondSelect OptimusPrime bustbank.jpg|thumb|"Saving Money is the right to all Sentient Beings".]]
*'''Optimus Prime Bust Bank''' (Diamond Select, 2010)

:A 6-inch hollow Optimus Prime bust to keep your spare change safe! It would've featured articulation in its shoulders and neck, but like the Powermaster bust, it never saw release.

{{canceledtoy}}
{{-}}

==''Transformers'' (2007)==
*'''Optimash Prime''' (2007)
{{main|Optimash Prime}}
{{-}}
[[File:Softimus Prime.jpg|thumb|Freedom is the right of all sentient beings... in bed.]]
*'''Softimus Prime''' (2007)

:Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He features Movie-style faction symbols on his right arm and both sides of his cab mode. He is love.

::*''[http://www.tfu.info/2007/Autobot/SoftimusPrime/softimusprime.htm More information on Softimus Prime at TFU.info]''

{{-}}

==''Robot Heroes''==
[[File:RH Optimus vs Ravage.jpg|thumb|upright=1.66|Mini-Me!]]
*'''Optimus Prime & Ravage''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Part of the first wave of ''[[Robot Heroes (toyline)|Robot Heroes]]'' 2-packs (sold under the [[Transformers (2007 toyline)|2007 live-action-movie line]] branding), Optimus Prime is a simple, yet well-detailed two-inch tall figurine with exaggerated, cartoony proportions, with swivel articulation at the neck and shoulders. He is sculpted holding his Ion Blaster rifle in his right fist and his left arm in a pointing pose. He is also love, and demands that you pull his [[More than Meets the Eye, Part 3#Notes|Finger of Doom]].

: He was sold in a two-pack with [[Ravage (G1)/toys#Robot Heroes|Ravage]], positioned in a way that gives an impression of [http://orig12.deviantart.net/b22b/f/2008/216/7/1/optimus_prime_vs_ravage_by_cobaltkitty.jpg him freaking out to Ravage's size].

: This version of Optimus was later also released as part of a set with a 100-piece [[jigsaw puzzle]] with no apparent changes.

{{anchor|RHBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: In some countries outside of North America, Optimus Prime was released individually in a blindpack with no notable changes.

{{-}}{{anchor|RH5pack}}
[[File:Robot Hero Supermetal Optimus Prime.jpg|thumb|upright=0.99|Cuteness is the right of all sentient beings.]]
*'''Decepticon Sneak Attack''' (Multi-pack, 2007)

: "Optimus Prime with Supermetal Finish" is a slightly-shinier [[redeco]] of the previous ''Robot Heroes'' figure; this is the most noticeable with his blue parts, which are now in a much brighter, richer gloss-blue paint rather than the unpainted darker-blue matte plastic of the two-pack version.

: He came in a [[Walmart]] exclusive multipack, alogn with [[Mirage (G1)/toys#RH5pack|Hologram Mirage]], [[Cliffjumper (G1)/toys#Robot Heroes|Cliffjumper]], "Supermetal Finish" [[Megatron (G1)/merchandise#RH5pack|Megatron]], and [[Skywarp (G1)/toys#Robot Heroes|Skywarp]].

{{anchor|RHFinishBlindpack}}
*'''Optimus Prime with Supermetal Finish''' (Single-pack, 2008)

: "Supermetal Finish" Optimus Prime also saw release in a blindpack outside of North America.

{{-}}{{anchor|RHUnicron}}
[[File:RH Prime vs Unicron.jpg|thumb|upright=1.66|'Til all are cute.]]
*'''Optimus Prime & Unicron''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Sold in the third wave of ''Robot Heroes'', this version of Optimus is posed opening the [[Matrix of Leadership]], complete with clear-plastic shine.

: He was packed with a very small [[Unicron/toys#Robot Heroes|Unicron]].

{{anchor|RHMatrixBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: Just like the previous figures, the Matrix-bearing Prime also received a blindpacked release.
{{--}}

==''Attacktix''==

*'''Optimus Prime''' (Starter Set, 2007)
[[File:Attacktix Optimus Prime.jpg|thumb|He shoots sideways. The direction, not [[Sideways (Armada)|the character]].]]
{{attacktix
|ID=TF2-19
|faction=Autobot
|class=Leader
|special=Last Stand - 13/26 (50%) success ratio
|cost=40
|speed=6
|attacktype=Shooter (Force Blast)
}}
{{-}}
:Optimus Prime will shoot you down. He was released as part of the 2007 Starter Set along with ''[[The Transformers (franchise)|Generation 1]]'' [[Megatron (G1)/toys|Megatron]], ''[[Transformers: Energon (franchise)|Energon]]'' [[Landquake (Energon)|Landquake]] and ''[[Transformers: Cybertron (franchise)|Cybertron]]'' [[Skywarp (Armada)|Skywarp]].

:Optimus' Last Stand special allows him to stand up if he's the only figure in your team left in play. If you're down to two men you might even be tempted to shoot your own man just to keep Optimus Prime in play. Don't though. [[Peter Cullen]] wouldn't approve.

:Sadly you can't bring him into play with the ''Cybertron'' [[Optimus Prime (Armada)/toys|Super Optimus Prime]] vehicle mode because he's not ''Super'' Optimus Prime.
{{-}}

==''Revoltech''==
[[File:Revoltech Convoy.jpg|thumb|upright=1.66|Windowbra! ''(2007 Version pictured)'']]
*'''Convoy''' (2007/2014)
**''Series number:'' '''019'''
**''Legacy of Revoltech ID number'': '''LR-008'''
**''Accessories:'' Ion blaster, Autobot Matrix of Leadership, two clenched fists, gun-wielding right hand, pointing right hand, open left hand

:A non-transforming but ''highly'' articulated Optimus Prime action figure, ''[[Revoltech]]'' Convoy uses the ''Revoltech'' "revolver joints" for maximum poseability. Prime comes with his now-standard ion blaster and Matrix of Leadership accessories, as well as a few alternate hands; while one of the hands is specifically designed to grip the ion blaster, he can't really do anything dramatic with the Matrix, and it just sort of sits in his open-palmed left hand. His sculpting is explicitly in the style of [[Pat Lee|Pat "serfdom" Lee]]'s interpretation of Prime, but due to physical constraints has no lack of perspective.

:Unsurprisingly, this mold was redecoed to create ''Revoltech'' [[Ultra Magnus (G1)/merchandise#Revoltech|Ultra Magnus]]. Magnus comes with a new hand mold that can be used to connect him and Prime together in a handshake.

:The initial reveal of the figure (sculpted by Yamaguchi) features swiveling cut joints instead of "revolver joints" (notably the hip parts), with a rather jarring angled joint on the waist (which results in a "sliced" appearance if swiveled).

:Unfortunately, ''Revoltech'' Convoy cannot be distributed to the US due to licensing restrictions, so fans must rely on online hobby shops to import him.

:In 2014, ''Revoltech'' Convoy was reissued as part of the ''Legacy of Revoltech'' line, with an increased price of 3900 yen. This rerelease uses revised Revoltech joints, which come in matte black instead of glossy and have more ratcheting points than previous releases.
{{-}}
===''Amazing Yamaguchi''===
[[File:Tf-Yamaguchi-Revoltech-014-Convoy.jpg|upright=1.66|thumb]]
*'''Convoy''' (2019)
**''Series number:'' 014
**''Accessories:'' Ion Blaster, Energon Axe, 1 pair of splayed hands, 1 pair of trigger hands, left clawed hand, right pointing hand, interlocked hand

:''Amazing Yamaguchi'' Convoy is an all-new take to the Revoltech figure above, but more poseable. Apart from the Ion Blaster, this figure comes with an Energon Axe accessory, and an interlocked hand accessory that is designed to resemble the haymaker that took down Megatron in ''[[The Transformers: The Movie]]''.

:Unlike the first Revoltech figure, Convoy features painted-details-on-colored-plastic rather than fully coating them. The plastic is noted to have a hollow feel compared to the first figure.

:Due to production delays, the release date was rescheduled from September 29 to October 24.
{{-}}

==Sota Toys==
*'''Transformers Chess Set''' (<s>2007</s>)
:An Optimus Prime piece was to be the Autobot-side King on a [[Chess#Sota Toys|chess set]] based on Generation 1, but the set apparently never saw release.
{{canceledtoy}}
{{-}}

==Ornaments==
*'''Optimus Prime''' (2007)
[[File:OptimusPrimeG1Ornament.jpg|thumb|100px|''(American Greetings version pictured)'']]

:Manufactured by [[American Greetings]] as part of their Heirloom ornament collection, this hanging sculpt of Optimus Prime is based upon the 20th Anniversary toy release.
{{-}}

*'''Optimus Prime''' (2014)
[[File:Optimus-prime-keepsake-Hallmark.jpg|thumb|''(Hallmark version pictured)'']]
:Manufactured by [[Hallmark]] as part of their Keepsake ornament collection as part of the Hasbro series which includes ornaments based on [[My Little Pony]] G1, the electronic game Simon, and the board game Sorry, this hanging sculpt of Optimus Prime is based upon the original G1 toy cab in robot mode posed like 1984 box art.
{{-}}

==''Mighty Muggs''==
[[File:MightyMuggs OptimusPrime.jpg|thumb|Optimus lost his ears in the rock tumbler.]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: This [[super deformed]], non-transformable Optimus Prime figure uses the standard [[Mighty Muggs]] body template, with swivel joints in his neck and limbs. He comes with a similarly super-deformed version of his ion rifle.
{{-}}

{{anchor|SDCCmightymugg}}
[[File:MightyMuggs MetallicOptimusPrime.jpg|thumb|Optimus, did you polish your head in the Shine-O Ball-O?]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: An [[exclusive]] to the 2009 [[San Diego Comic-Con]], this Optimus Prime Mugg has a shiny metallic finish.
{{-}}

{{anchor|2018mightymugg}}
[[File:MightyMuggs 2018 Optimus.jpg|thumb|upright=1.44|You ever get so mad you sprout new ears?]]
*'''Optimus Prime''' ([[2018]])
**''ID number:'' '''01'''

: Based on his [[evergreen]] design, this Optimus is part of the 2018 ''Mighty Muggs'' relaunch. As part of the new line, he has a helmet that can be pressed down to change his expression. He features three different faces: [[Mouthplate|classic]], angry, and angrier.
{{-}}

==Transformers Wacky Wobblers==
[[File:WackyWobblers G1OptimusPrime.jpg|thumb|upright=0.85]]
*'''Optimus Prime''' (2009)

: This Optimus Prime {{w|bobblehead}} is part of the popular ''[[Wacky Wobblers]]'' line produced by {{w|Funko}}. Aside from the standard-issue big wobbling head, he features an ion rifle molded onto his right hand and his arms swivel at the shoulders. Optimus is affixed to a base with his name on it.
{{-}}

==USB-Powered Speaker Head==
*'''Optimus Prime USB-Powered Speaker Head'''
[[File:G1-optimusprime-merc-speaker.jpg|thumb]]
: As a 6.5" figure, Optimus Prime's head contains twin {{w|Universal Serial Bus|USB}}-powered speakers. There are two speakers inside each side of his head. The control panel, USB port, and earphone port are located in the back of the head. Under the neck, there is a display to support the head.
: The speaker was redecoed to create Ultra Magnus Speaker.
{{-}}

==Transformers Backpacks==
*'''Optimus Prime''' (2009)

:Made by [[F*A*B Starpoint]], these backpacks are allegedly "engineered for style, safety, comfort... and saving the Universe!" The Generation 1 Optimus Prime design features a stock silhouette of Optimus Prime surrounded by stars, like the [[Paramount Pictures]] logo, while on the lower compartment there is a gigantic Autobot sigil.

==Universal Studios==
*'''Optimus Prime plushie''' (2011)

:Created for the [[Transformers: The Ride – 3D|Transformers ride at Universal Orlando]], a [[super deformed]] plush toy of Optimus was made available at the Supply Vault gift shop near the opening of the ride.

==Tomica==
[[File:TF-Tomica-Wrapping-Trailer.jpg|thumb]]
*'''Transformers Wrapping Trailer''' (2011)
:''[[Tomica]]'' "Transformers Wrapping Trailer" is a die-cast, non-transforming semi tractor-trailer. A redeco of the 2008 "[[wikia:tomica|Tomica Hero: Rescue Force Trailer]]" toy, "Transformers Wrapping Trailer" renders the cab in Generation 1 Optimus Prime colors, while the trailer is decked out with pictures of [[live-action film series]] [[Optimus Prime (Movie)|Optimus Prime]], [[Bumblebee (Movie)|Bumblebee]] and [[Ironhide (Movie)|Ironhide]]. Like all Tomica toys & all [[Go-Bot (G2)#Toys|''Generation 2'' Go-Bots]] and [[Spychanger]]s, Wrapping Trailer features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces.
{{-}}

==Transformers x Mimobot==
[[File:Mimobot OptimusPrime.jpg|thumb|upright=1.66|Why the long face?]]
*'''Optimus Prime Mimobot''' (Mimoco, 2011)
:Produced by [[Mimoco]] as part of their multi-brand line of designer USB "Mimobot" flash drives, this Optimus Prime memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.
{{-}}

==Cuponk==
[[Image:NYCC2011 Cuponk.jpg|thumb|250px|The real contest is whether Prime's medal or Megatron's belt is cooler.]]
*'''Transformers Cuponk''' (2011)
:A New York Comicon exclusive, this set includes two Cuponk cups and 6 ping pong balls. Prime is featured on one cup and one ping pong ball. The same cup also features [[Bumblebee (G1)|Bumblebee]], [[Jazz (G1)|Jazz]], [[Grimlock (G1)|Grimlock]], and [[Hot Rod (G1)|Hot Rod]].
{{-}}

==Titan Warriors==
[[File:Titan-Warrior-Optimus-Prime.jpg|upright=1.11|thumb|Sofubi Hero figures are the right to all young sentient beings.]]
*'''Titan Warrior 5-Pack''' (2013)
:Available at San Diego Comic Con 2013, This Optimus Prime is a 6" PVC Titan Warrior figure (similar to Bandai's ''Ultra/Sentai/Rider Hero, Movie Monster Series'') representing his Generation 1 character. He was packed with [[Grimlock (G1)/toys|Grimlock]], [[Megatron (G1)/toys|Megatron]], [[Starscream (G1)/toys|Starscream]] and [[Soundwave (G1)/toys|Soundwave]].

*'''Optimus Prime''' (Titan Warrior, 2014)
:The Titan Warriors Optimus Prime toy was released individually, under the Beast Hunters Titan Heroes subline.

{{-}}

==''The Loyal Subjects''==
*'''Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Talking}}
*'''Talking Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Larger}}
*'''Talking 5.5" Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Blank}}
*'''8" Blank/DIY Optimus Prime''' (2014)
{{anchor|The Loyal Subjects OG}}
*'''8" OG Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Fiberglass}}
*'''4' Fiberglass Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Hot Topic}}
*'''Talking 5.5" Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Dead}}
*'''8" Dead Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Silver}}
*'''8" Silver Bullethole Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Gold}}
*'''8" Gold Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Black Gloss}}
*'''8" Black Gloss Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Gamestop}}
*'''Talking Optimus Prime''' (2014)
{{charstubtoys}}
{{-}}

==''Mecha Nations''==
[[File:klog tfop 003.jpg|thumb|upright=1.66|Prime, not the shrink wrap!]]
*'''Optimus Prime''' (2014)
**''ID Number:'' '''MN01'''
**''Accessories:'' Ion Blaster, Energon Axe, Removable Armor.

:Created by [[Kids Logic]], this [[super deformed]] G1 Optimus Prime stands 6" tall and is articulated. He features a metallic color scheme, removable armor and replacement hands. He also features LED light up eyes, lights, weapons and [[Matrix of Leadership|Creation Matrix]].

:This figure was also redecoed into Mecha Nations [[Nemesis Prime (G1)#Mecha Nations|Black Convoy]] and [[Ultra Magnus (G1)/merchandise#Mecha Nations|Ultra Magnus]].

{{-}}

==''Ultimetal''==
[[File:Ultimetal-UM01-Optimus-Prime.jpg|upright=1.66|thumb|"Why waste your money so easily Prime?"]]
*'''Optimus Prime''' (2014)
**''ID number:'' '''UM-01'''
**''Accessories:'' Ion blaster, energon-axe, small Matrix, 24 armor pieces, 2 smokestacks, large Matrix, display stand, 8 display stand parts, remote control

: ''Ultimetal'' Optimus Prime is a large non-transforming figure produced by [[Art Storm]], standing at an impressive 1 foot 4 inches/43 cm and made from extensive [[die-cast]] metal. Packaged in four different boxes, he features plenty of articulation and detail, including an opening chest and numerous magnetically attached armor panels that, when removed, reveal Prime's internal anatomy. He also has electronic light-up eyes and roof lights as well as 20 spoken English phrases, all activated via remote control. His [[mouthplate]] even moves when he talks, just like in the cartoon!

: Prime comes with an ion blaster which can also be opened to reveal technical detail, an energon-axe, and two Matrices of Leadership of different sizes. The smaller one fits into his chest, where it can be lit up by an LED, while the larger one lights up on its own and can be held in his hands or placed on display. Prime's display stand has smaller stands for the Matrix and ion blaster and also has light-up parts.

: Optimus Prime was recolored into the inner robot of ''Ultimetal'' [[Ultra Magnus (G1)/merchandise#Ultimetal|Ultra Magnus]].

::*''[http://artstorm.co.jp/ultimetal_optimusprime.html More information on ''Ultimetal'' Optimus Prime at Art Storm's official site]''

*'''Optimus Prime - Battle Damaged''' (2018?)
**''ID number:'' '''UM-01BD'''

{{-}}

==''EX Gōkin''==
[[File:EXGokin Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2014)
**''Accessories:'' Two fists, two open hands, two gripping hands, right pointing hand, ion blaster, energon-axe, display stand

: A 6.6-inch tall non-transforming Optimus Prime action figure was produced by Art Storm as part of their ''EX Gōkin Transformers Series'' line. He comes with his trademark blaster and energon-axe as well a number of extra hands, and his chest opens to reveal a non-removable Matrix.

::*''[http://artstorm.co.jp/exgokin_transformersseries_convoy.html More information on ''EX Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==Hikari==
[[File:HikariLimitedEditionMetallicOptimusPrime.jpg|thumb|upright|150px]]
*'''Metallic Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime with a metallic finish. This figure is a limited edition, and limited to 2,000 pieces.

:This mold was also used to make the other limited edition Optimus Primes seen below.

{{-}}
[[File:HikariLimitedEditionClearGlitterOptimusPrime.jpg|thumb|upright|150px]]
*'''Optimus Prime Clear Glitter''' (2014)

:A non-transforming vinyl Optimus Prime figure. While retaining the classic, original colors, this mold is redone to be clear plastic, with glitter bits put into the figure. This vinyl is a limited edition, and limited to 3,000 pieces.

{{-}}
[[File:HikariLimitedEditionBattleReadyOptimusPrime.jpg|thumb|upright|150px]]
*'''Battle Ready Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The mold is Redon again, this time in a battle-damaged look, while he retains the classic Optimus Prime colors. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionGreySkullOptimusPrime.jpg|thumb|upright|150px|By the power of Grayskull... '''''I HAVE THE POWER!''''']]
*'''Grey Skull Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. This vinyl takes the colors in a different way, which is mostly white with some dark grey areas. The colors to kinda look skeleton-ish. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDistressedOptimusPrime.jpg|thumb|upright|150px]]
*'''Distressed Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The colors take on an [[Optimus Prime (Movie)#''Age of Extinction'' film|Age of Extinction Optimus Prime]], in his flat-nose truck mode. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionFireOptimusPrime.jpg|thumb|upright|150px]]
*'''Fire Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in clear plastic. The colors seem to homage the Generation 1 [[Hot Rod (G1)|Rodimus Prime]].,This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDangerousOptimusPrime.jpg|thumb|upright|150px]]
*'''Dangerous Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, done in a camouflage style. This figure is a limited edition, and limited to only 600 pieces.

{{-}}
[[File:HikariLimitedEdition24KOptimusPrime.jpg|thumb|upright|150px]]
*'''24K Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in gold plastic. This figure is a limited edition, and only limited to 600 pieces.

{{-}}
==''Thrilling 30''==
*'''Optimus Prime''' (Collectible Figurine, 2014)
**''Series / Number:'' '''1 / #1'''
**''Accessories:'' Collector's base
:A super-deformed Optimus Prime was released among the blindpacked [[Thrilling 30#Collectible Figurines|''Thrilling 30'' Collectible Figurines]] by [[Goldie Marketing]]. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

*'''Collectible Figurines''' (5-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 5 Collector's bases
:The same Optimus Prime figurine was also available in a 5-pack alongside [[Megatron (G1)/merchandise#Thrilling 30|Megatron]], [[Ratchet (G1)/toys#Thrilling 30|Ratchet]], [[Starscream (G1)/merchandise#Thrilling 30|Starscream]] and [[Soundwave (G1)/merchandise#Thrilling 30|Soundwave]].

*'''Optimus Prime 3-pack''' (3-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 3 Collector's bases
:The same Optimus Prime figurine was ''also'' available in a 3-pack alongside [[Optimus Prime (WFC)/merchandise#Thrilling 30|''Prime'' Optimus Prime]] and [[Optimus Prime (Movie)/merchandise#Thrilling 30|Movie Optimus Prime]].
{{-}}

==Leg Avenue==
{{anchor|LegAvenue}}
[[File:Leg Avenue Optimus Prime.jpg|right|upright=.75|thumb|]]
:Costume and lingerie manufacturer Leg Avenue released an officially licenced Bumblebee costume along side ones for [[Bumblebee (G1)/merchandise#LegAvenue|Bumblebee]] and [[Megatron (G1)/merchandise#LegAvenue|Megatron]].

{{-}}

==''Tiny Titans''==
*'''Optimus Prime''' (Tiny Titans, 2015)
**''Series'': '''2'''
**''Number'': '''10/12'''

: Part of the third assortment of ''[[Tiny Titans]]'' [[blindpacking|blindpacks]], this version of Optimus Prime is a very small, soft-plastic figure of him in robot mode, brandishing both his rifle and his energy-axe weapon in a running battle pose.

: He includes a collectible card that renders him in the [[Transformers: Robots in Disguise (2015 franchise)|2015 ''Robots in Disguise'']] styling. The card includes a scan-badge for the [[Transformers: Robots in Disguise (mobile game)|''Robots in Disguise'' mobile game]], which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.

{{-}}{{anchor|TinyTitans2}}
[[File:TinyTitans OptimusG1S5.jpg|upright=1.67|thumb]]
*'''Optimus Prime''' (Tiny Titans, 2016)
**''Series'': '''5'''
**''Number'': '''11/12'''

: Part of the fifth assortment of ''Tiny Titans'', this version of Optimus is in a more neutral pose, this time only carrying his rifle.

: As per usual, he includes a collectible card that includes a scan-badge for the ''Robots in Disguise'' mobile game, which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.
{{-}}

==''D-Style''==
[[File:D-Style-OptimusPrime.jpg|thumb|upright=1.66|You got D-touch. You got D-power]]
*'''Convoy''' (2015)
**''ID number:'' '''43'''
**''Accessories:'' Two fists, pointing right hand, Ion blaster, energon-axe, Autobot Matrix of Leadership, Convoy cab with trailer

:An Optimus Prime was produced by [[Kotobukiya]] as part of ''[[D-Style]]'', their franchise-spanning line of super deformed model kits. His accessories include an ion blaster, an energon-axe, a Matrix that can store in his chest, and a tiny super deformed representation of his truck mode which can carry the ion blaster. Moving his antennae causes his mouthplate to move up and down.

:For a small figure it includes a large amount of articulation, including ankle tilts and top of legs tilting away from the yellow codpiece.

: The Convoy Trailer, ion blaster and the gold part of the Matrix all require painting. In addition, on promotional images ''all'' the black details and lines (for example on the front thighs and round the edge of the yellow codpiece) are painted and the eyes have been painted blue instead of left as clear plastic.

: Amusingly, the head has the [http://www.1999.co.jp/itbig29/10294593z.jpg mouth-less face] underneath Optimus' mouthplate, as a either a reference to the error from [[The Search for Alpha Trion]] or limitation in the model kit (or both).

:This mold was also used to make ''D-Style'' [[Nemesis Prime (G1)#D-Style|Black Convoy]].
{{-}}

==''ES Gōkin''==
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe, Matrix, left & right gripping hands, left & right open hands, left & right pointing hands, display stand

:Optimus Prime was also released as part of Art Storm's ''ES Gōkin'' series, a line of posable super deformed figures. He comes with his trademark gun which he can hold in either hand, an energon-axe that plugs into his wrist sockets, and a Matrix he can hold but not store in his chest.

::*''[http://artstorm.co.jp/esgokin_convoy.html More information on ''ES Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==''D-Collection''==
[[File:D-Collection Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe

:[[Kabaya]]'s ''D-Collection'' Optimus Prime is a small super deformed figure that requires some assembly and features articulation limited to his shoulders. He comes with his trademark blaster and axe accessories. Sold blindpacked, Prime is available as both a standard full color figure and a rare clear plastic version. He comes with chewing gum.
{{-}}

==''Metal Earth''==
[[File:Metal Earth Optimus Prime.jpg|thumb]]
*'''Optimus Prime''' (2015)
**''ID number:'' '''MMS300'''
:''[[Metal Earth]]'' Optimus Prime is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".
{{-}}
[[File:Metal Earth Legends Optimus Prime.jpg|thumb|[[Minecraft|Minecraft x Transformers]] before ''Minecraft x Transformers'' was a thing]]
*'''Optimus Prime''' (Legends, 2019)
**''ID number:'' '''MEM055'''
:''Metal Earth Legends'' Optimus Prime is a DIY 3D steel model kit in the shape of a super deformed version of the [[evergreen]] Optimus design. The kit's difficulty rating is given as "moderate".
{{-}}

==Hot Toys==
*'''Optimus Prime (Starscream Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Ion Blaster, two wings, two wing mounts, two null-rays, Matrix of Leadership, Base, Starscream's head (Sideshow Collectable's exclusive)

:Released by [[Hot Toys]] this high end collector figure stands approximately 30 cm tall. It features LED light up eyes and it's chest can open to reveal a LED light up, removable Matrix of Leadership. This version comes with a pair of wings and two [[null-ray]]s from Starscream that Optimus can attach. The Sideshow exclusive version of this comes with Starscream's severed head.

*'''Optimus Prime (Megatron Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Fusion cannon, Ion Blaster, gun with stock, set of wheels, two cannon mounting accessories, shoulder mount, Matrix of Leadership, Base

:This version of the figure has accessories themed from Megatron. These include Megatron's [[fusion cannon]], and a long rifle that passingly resembles Megatron's original gun mode. Both can be combined into a large two handed cannon.

{{-}}

==''Block Wars''==
*'''Optimus Prime''' (2016)
**''Number:'' '''1'''

:Part of [[Kabaya]]'s ''[[Transformers Block Wars]]'' candy toy line, this Optimus Prime kit is surprisingly, based on his [[Optimus Prime (G1)/toys#Cyber Series|Cyber Series Commander toy]]. Molded in red, blue, and yellow plastic with detailing from stickers, he transforms into a truck when finished and is armed with a two-pronged spear. He can also be taken apart and combined with ''Block Wars'' [[Bumblebee (G1)/toys#Block Wars|Bumblebee]], [[Megatron (G1)/merchandise#Block Wars|Megatron]] and [[Starscream (G1)/toys#Block Wars|Starscream]] in various configurations, the ones involving Prime shown on the packaging being:

:*Giving Prime Starscream's wings as a jetpack and arming him with Megatron's cannon.
:*Placing Megatron's turret on Prime's truck mode.
:*Giving Bumblebee Prime's spear, Megatron's arms and Starscream's wings.
:*Attaching Prime and Starscream's legs to Megatron's vehicle mode to create a walking tank.
:*Powering Starscream up by attaching Prime's spear to his back and giving him Bumblebee's weapons.
:*Combining all four into an unnamed combiner, with Optimus Prime forming the torso and upper legs.

==''Transformers Figure Collection''==
[[File:TF-Transformers-Figure-Collection-Optimus-Prime-Decoy.jpg|thumb]]
*'''Convoy''' (01-2016)

:Standing 42mm tall, ''Transformers Figure Collection'' Optimus Prime is a non-poseable soft-rubber figure greatly based on a [[Decoy (G1)|Decoy]] figure.

{{-}}

==''Hero of Steel''==
[[File:HeroofSteel Convoy.jpg|thumb|upright=1.11]]
*'''Convoy''' (2016)
**''Accessories:'' Ion blaster

:Produced by Alpha Max, ''Hero of Steel'' Convoy is a stylized, non-transforming figure standing at 9 inches/23 cm tall. He comes with his ion blaster.

{{-}}

==Bitfig==
[[File:Bitfig-Part-1.jpg|thumb|]]
*'''Convoy''' (12-2016)
Part of the first wave of Transformers Bitfig capsule toys by [[TakaraTomy A.R.T.S]],
Convoy's design is inspired by his appearance in the G1 cartoon, and is articulated at the neck and shoulders.
Bitfig toys were packaged in capsules color coded to the toy they contained.
{{-}}

==Prime 1 Studio==
===''Premium Masterline''===
[[File:TF-Premium-Masterline-PMTF-01-Optimus-Prime.jpg|upright=1.55|thumb|"Just in case you want to say "''I should've looked like this in the movies''", yes, I heard you."]]
*'''Optimus Prime''' (2017)
**''ID Number'': '''PMTF-01''' / '''01EX''' (exclusive)
**''Accessories'': Base, Fusion axe (exclusive), Energy axe (exclusive)

:One of the very first releases of the ''Premium Masterline'' series by [[Prime 1 Studio]], this Optimus Prime is a ''massive'' non-transforming statue based on his Generation 1 appearance with a blend of live-action film aesthetic, and features light-up LED eyes. The statue was also designed by [[Josh Nizzi]] himself. If customers had purchased the statue at [https://www.sideshowtoy.com/collectibles/transformers-optimus-prime-transformers-generation-1-prime-1-studio-9027641/ Sideshow's website], they would receive exclusive Energy and Fusion axes, which can be used to replace Prime's Ion Blaster-holding hand. The standard version was limited to 1500 pieces, while the exclusive version was limited to 750 pieces.

:This statue was later redecoed as [[Nemesis Prime (G1)#Prime 1 Studio|Nemesis Prime]] and [[Ultra Magnus (G1)/merchandise#Prime 1 Studio|Ultra Magnus]]. The statue's model also served as an inspiration to [[Optimus Prime (Movie)|Movie Optimus Prime]]'s appearance in the ''[[Bumblebee (film)|Bumblebee]]'' film.

{{-}}{{anchor|P1SGold}}
[[File:TF-Premium-Masterline-PMTF-01GL-Optimus-Prime-Gold-Edition.jpg|upright=1.55|thumb]]
*'''Optimus Prime Gold Version''' (2018)
**''ID Number'': '''PMTF-01GL'''
**''Accessories'': Base, Fusion axe

:Limited to 500 pieces, Optimus Prime Gold Version is a redeco of the statue above, evoking his Electrum-coated appearance in the Generation 1 episode "[[The Golden Lagoon (episode)|The Golden Lagoon]]". He also comes with a Fusion axe accessory that can replace his Ion Blaster hand.

{{-}}
===''Age of Time''===
[[File:Prime 1 Studio Superior Optimus Prime.jpg|upright=1.55|thumb]]
*'''Superior Optimus Prime''' (<s>201?</s>)

:''Age of Time'' Superior Optimus Prime was designed to be the "ultimate amalgamation" between G1 and movie Optimus Primes. He would have come with two blasters and a huge jetpack, specifically taking cues from Prime's combined form with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]''.

:For reasons unknown, this figure was silently canceled.
{{canceledtoy}}

{{-}}
===''Cutie1''===
[[File:Cutie1 Optimus Prime Figure.jpg|upright=1.11|thumb|''Transformers X Coraline'', directed by [[Travis Knight]].]]
*'''Optimus Prime''' (2022)
**''ID Number'': '''No:055'''
**''Accessories'': Stand

:A striking departure from previous Prime 1 Studio offerings, ''Cutie1'' Optimus Prime is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

:He was later redecoed as ''Cutie1'' [[Nemesis Prime (G1)#Cutie1|Nemesis Prime]].

{{anchor|Cutie1keychain}}
*'''Optimus Prime''' (Keychain, 2021)
**''Accessories'': Stand, chain

:Part of a marketing push following the announcement of the figure above, an acrylic keychain of ''Cutie1'' Prime was released, along with other products such as stickers, T-shirts, hand towels and totebags using the design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.

{{-}}{{anchor|P1SWFC}}

===''War for Cybertron Trilogy''===
[[File:Prime-1-Studio-WFC-Optimus-Prime.jpg|upright=1.66|thumb|"Why... have I... been... canceled?"]]
*'''Optimus Prime''' (<s>2022</s>)
**''ID Number'': '''PMTF-05''' / '''05UT''' (Ultimate Version)
**''Accessories'': Base (standard), base with Shockwave (Ultimate Version)

:A statue based on Optimus Prime's appearance in the ''[[Transformers: War for Cybertron Trilogy (cartoon)|War for Cybertron Trilogy]]'' cartoon. The exclusive version includes a defeated [[Shockwave (G1)/toys#Prime 1 Studio|Shockwave]] as part of the statue's base.

:This item was canceled due to the combination of rising production costs and insufficient preorders.
{{canceledtoy}}
{{-}}

==My Busy Books==
[[File:TF-My-Busy-Books-Transformers-Optimus-Prime-figurine.jpg|upright=1.66|thumb]]
*'''Transformers: My Busy Book''' (2017)

:Included with the [[Transformers: My Busy Book|10-page board book]], 12 figurines, and a playmat, Optimus Prime is represented by a pair of small, PVC non-transforming figurines of his robot and his semi-truck alternate mode, based on his [[evergreen]] design. Like most of the land-based vehicle figurines, his wheels do not roll.

:In terms of quality control, the figurines' paint applications can be... shoddy. If you're a collector who prefers to display them, you should resign yourself from buying it or try to [[customizing|customize]] the figures with better paint applications if you have the skills.
{{-}}

==Rubik's Crew==
[[File:Rubiks Crew Optimus.jpg|upright=1.66|thumb]]
*'''Rubik's Crew Game: Transformers Optimus Prime Edition'''<ref>[https://www.hasbro.com/en-us/product/rubik-s-crew-game-transformers-optimus-prime-edition:70976F4B-5056-9047-F52F-5BB6105031BB Rubik's Crew Game: Transformers Optimus Prime at hasbro.com]</ref> (2017)
This [[super deformed]] version of [[Optimus Prime (G1)|Optimus Prime]]'s robot mode has a detachable "Puzzlehead" that functions like the [https://www.rubiks.com/store/puzzles/rubiks-2x2 2x2] [[Rubik's Cube]].
{{-}}
{{-}}
==Fidget Its==
[[File:TF-Fidget-Its-Optimus-Prime.jpg|upright=1.66|thumb|Before time began, there was...the Cube.]]
*'''Optimus Prime''' (Fidget Its, 2017)

:''Fidget Its'' Optimus Prime is a non-transforming cube-shaped figurine, built for for your fidgeting needs! His pair of eyes & his forehead can be pushed like buttons, his right arm can swivel, his rear section can be fiddled like a combination lock dial, and his left arm can be moved up, down, up, and down.

{{-}}

==Hauck==
[[File:Hauck Go Kart Optimus.jpg|upright=1.66|thumb|Everyone wants to ride Optimus.]]
*'''Optimus Prime Go Kart''' (2017)
:Manufactured by [[Hauck toys]], the Optimus Prime go-kart is a small, pedal-operated vehicle for kids aged 4-8 years old. Cast in the image of Optimus (even featuring his head sculpted on the front), the kart features an adjustable seat as well as a brake.
{{-}}

==Colorcasa==
[[File:Gen-Colorcasa Optimus Prime Spoon Fork.jpg|upright=1|thumb|Eating is the right of... yeah you know the gist.]]
*'''3D Children Tableware''' (2017)
:Chinese company Colorcasa released a pair of children-sized cutlery in the form of a cute (though angry-looking) Optimus Prime, one as a spoon and another as a fork. They were branded as ''Generations'' products.
{{-}}

==Threezero==
===Premium===
*'''Optimus Prime - Classic Edition''' (Premium Scale, 2017)
**''Accessories:'' TBA
{{charstubtoys}}
{{-}}
===DLX===
*'''''War for Cybertron Trilogy'' Optimus Prime''' (DLX Scale, 2021)
**''Accessories:'' Ion Blaster, Energon Axe, Energon Shield, 5 pairs of hands, Action Stand
{{charstubtoys}}
{{-}}

===MDLX===
[[File:Threezero-MDLX-Optimus-Prime.jpg|thumb|upright]]
*'''Optimus Prime''' (2022)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)
:[[Threezero]]'s second figure for the MDLX line, this version of Optimus Prime is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Optimus Prime is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and accessories, namely his ion blaster, energon axe and Matrix of Leadership. He comes with a suite of hands in pairs: closed fists, splayed-out relaxed hands, and three different pairs meant to specifically hold each one of the aforementioned accessories. His chest is magnetically attached and as such can store the Matrix when not in use. Optimus also comes with his backpack piece disassembled in package.

:He was redecoed into [[Nemesis Prime (G1)#Threezero|Nemesis Prime]], [[Ultra Magnus (G1)/toys#Threezero|Ultra Magnus]], as well as his [[Optimus Prime (SG)#MDLX|''Shattered Glass'' self]].

:Optimus is [https://www.threezerohk.com/wp-content/uploads/2023/05/MDLX_Transformers_Starscream_17-768x512.jpg compatible] with [[Starscream (G1)/merchandise#Threezero|Starscream]] by way of the latter's wing assembly and head, in reference to "[[Megatron's Master Plan, Part 1]]".

::*''[https://www.threezerohk.com/product/transformers-mdlx-optimus-prime/ More information on MDLX Optimus Prime at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXNewYear}}
*'''Optimus Prime (Year of the Dragon Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:An all-gold {{W|Chinese New Year}} themed redeco of the above figure, featuring dragon patterns across his chest and left arm. According to the product description from Threezero, the right shoulder features the character for "Year of the Dragon" (龍), while his left shoulder features the fifth character (辰) of "Earthly Branches" in traditional Chinese sequencing (地支). Optimus features all the same accessories and functionality as before.

:This figure was limited to 1398 pieces worldwide, revealed in late 2023 and released in February 2024.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-year-of-the-dragon-edition/ More information on MDLX Optimus Prime (Year of the Dragon Edition) at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXVintage}}
*'''Optimus Prime (Vintage Animation Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:Yet another redeco of Prime, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

:Vintage Animation Edition Prime, [[Megatron (G1)/merchandise#MDLXVintage|Megatron]] and [[Bumblebee (G1)/merchandise#MDLXVintage|Bumblebee]] were revealed in a [https://newsroom.hasbro.com/news-releases/news-release-details/40-years-one-legacy-hasbro-celebrates-transformers-40th press release] from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-vintage-animation-edition/ More information on MDLX Optimus Prime (Vintage Animation Edition) at Threezero]
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXSleep}}
*'''Optimus Prime (Sleep Mode)''' (2025)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:A redeco of Prime in various shades of grey as a callback to his death in [[The Transformers: The Movie]]. All previous accessories and functionality carry over from before.

:This figure was revealed on Threezero's official website on February 2025.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-sleep-mode// More information on MDLX Optimus Prime (Sleep Mode) at Threezero]
{{MDLXOptimusPrimeMold}}

==Kidrobot==
[[File:Kidrobot GIJoe Enamel Pin Series.jpg|thumb|250px]]
===Enamel Pin Series===
*'''Optimus Prime''' ([[November 3]], [[2017]])
:*''Rarity:'' 1 in 20
:Released by [[Kidrobot]] in their Enamel Pin Series, this is a flat, enamel pin badge of Optimus Prime inspired by the art of [[Tom Scioli]]'s ''[[Transformers vs. G.I. Joe]]'', albeit with [[Super deformed|cutesy proportions]]. The pin series was [[Blindpacking|blindboxed]], with some pins being rarer than others.
{{--}}

===Vinyl Mini Series===
[[File:Kidrobot GI Joe Optimus Prime mini.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[November 14]], [[2017]])
:*''Rarity:'' 2 in 24
:*''Accessories'': Sword
:The same character design was reused for the Vinyl Mini Series, with Optimus receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. Optimus featured articulation in each shoulder, and also included his [[Minecraft]] voxel sword as first seen in "[[Everybody Hates Metroplex]]".
{{-}}

{{anchor|kidrobotgid}}
[[File:Kidrobot GI Joe Optimus Prime GID mini.jpg|thumb|upright=1]]
*'''Optimus Prime GID''' ([[November 14]], [[2017]])
:*''Rarity:'' 1 in 48
:*''Accessories'': Sword
:Optimus's Vinyl Mini figure was redecoed into "Optimus Prime GID", sharing many of the same paint applications, but now cast entirely out of glow in the dark plastic, more closely representing his apparition to [[Scarlett]] in "[[Headmasters (issue)|Headmasters]]" or his resurrection in "[[The War Never Ends]]". He was one of the rarer, but not the rarest, of the Vinyl Mini Series. His sword is still included.
{{-}}

===Vinyl Keychain Series===
[[File:Kidrobot GI Joe Optimus Prime keychain.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[December 1]], [[2017]])
:*''Rarity:'' 3 in 24
:Optimus was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation. His sword is also absent.
{{-}}

==Bouncing Ball Heads==
[[File:BouncingBallHead OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2017)
:"Bouncing Ball Head" Optimus Prime is a small, super deformed figurine with a removable head that doubles as a bouncy ball. An Autobot logo is tampographed on the back of his head and his name is written under his feet.

:He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique red color.

:Despite clearly representing Generation 1 characters, the collection is advertised as a 2015 ''[[Transformers: Robots in Disguise (2015 franchise)|Robots in Disguise]]'' product.
{{-}}

==Imaginarium Art==
[[File:ImaginariumOptimusPrime.jpg|upright=1.66|thumb|Brings new meaning to "no matter the cost."]]
*'''Optimus Prime''' (2017)

:[[Imaginarium Art]]'s first statue of Optimus Prime stands 24 inches tall and features multiple [[Light-emitting diode|LED]]s, two varieties of his laser rifle, and his energy axe. The statue's chestplate can open, revealing the Matrix of Leadership.

:The sculpted base for this figure also features the Combat Deck and Roller. Only 500 of this item were produced.
{{-}}

*'''Optimus Prime''' (2018)

:The "Legacy of Cybertron" statue is 12 inches tall, and its base can be connected to other statues in that series to produce a larger battle scene. 600 were produced.
{{-}}

==''Keshi Surprise''==
*'''Autobots''' (2018)

:The ''[[Keshi Surprise]]'' series by [[Super7]] consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980s [[Decoy (G1)|Decoy]]s. These [[blindpacking|blind-packed]] figures were sold individually or in cases depicting only their faction. Optimus Prime was available in red, yellow, blue, and purple, and included a foil trading card / sticker.
{{-}}
==Forever Clever==
{{anchor|Jumbochalk}}
*'''4 Pack Jumbo Chalk Set''' (2018)
:Released by [[Forever Clever]], the 4 Pack Jumbo Chalk Set includes a chalk holder featuring Optimus Prime. He's bundled with chalk holders of [[Megatron (G1)/merchandise#Jumbochalk|Megatron]], [[Bumblebee (G1)/merchandise#Jumbochalk|Bumblebee]] and [[Soundwave (G1)/merchandise#Jumbochalk|Soundwave]], and 4 pieces of appropriately colored chalk.
{{anchor|shapechalk}}
*'''5 Pack Shaped Chalk''' (2019)
:A piece of blue chalk formed into the shape of Optimus Prime. Bundled with [[Megatron (G1)/merchandise#shapechalk|Megatron]], [[Bumblebee (G1)/merchandise#shapechalk|Bumblebee]], [[Starscream (G1)/merchandise#shapechalk|Starscream]] and [[Windblade (G1)#shapechalk|Windblade]].
{{anchor|WallWalker}}
*'''Wall Walkers Optimus Prime''' (2018)
:Exclusively released in [[Blindpacking|blind bags]], ''Wall Walkers'' Optimus Prime has suction cups on its hands and feet so it can stick to walls. All its details are printed on, and besides its colors and printing, it is identical to the other Wall Walkers toys.
{{anchor|MiniWalker}}
[[File:MysteryMiniWalkers.jpg|upright=1|thumb]]
*'''Mystery Mini Walkers Optimus Prime''' (2021)
:Also a blind bag exclusive, ''Mystery Mini Walkers'' Optimus Prime is an eraser-like figure with movable arms and legs and printed-on details.
{{-}}
{{anchor|PBRoptimus}}
[[File:TF Authentics 2023 Pull-Back Racers Optimus Prime.jpg|upright=1|thumb|Up top!]]
*'''Pull-Back Racers Optimus Prime''' ([[2023]])
:This toy is a non-transforming rendition of Optimus Prime in a super-deformed rendition of his vehicle mode, albeit with his robot mode head and left arm sticking out of it. As the title suggests, this toy has a pull-back motor that will propel the toy forwards after being pulled back considerably enough.
{{-}}
{{anchor|ClipCharms}}
[[File:ForeverCleverClipCharms.jpg|upright=1|thumb]]
*'''Clip Charms Optimus Prime''' (2024)
:Released in blind bags, ''Clip Charms'' features a keychain of Optimus Prime's face with his name written beside it.
{{-}}
{{anchor|KeyBlasters}}
*'''Key Blasters''' (2024)
:A toy car released as part of the ''Key Blasters'' series prominently features Optimus Prime on its side and hood, with his name written on top in [[Alphabet#Autobot_script|Ancient Autobot]] script. A key is included. When it is inserted into the car, pushing the button on the key will propel the car forward. It was sold in a two-pack with a [[Starscream (G1)/merchandise#KeyBlasters|Starscream]] themed car.

===Squeezelings===
*'''Optimus Prime''' (Series 1, 2022)
:''[[Squeezelings]]'' Optimus Prime is a [[super deformed]], non-posable figure made of soft plastic and holding his ion blaster, released by [[Forever Clever]]. He was released in [[blindpacking|blind bags]] and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

{{-}}{{anchor|SqueezelingsBlackout}}
*'''Blackout Color Mode Optimus Prime''' (2022)
:A [[black redeco]] of the previous Optimus Prime figure. It was exclusive to an 8-figure gift set, featuring [[Optimus Prime (G1)/merchandise#Squeezelings|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings|Bumblebee]], [[Starscream (G1)/merchandise#Squeezelings|Starscream]], [[Megatron (G1)/merchandise#Squeezelings|Megatron]], and Blackout Color Mode versions of the three other characters.

{{-}}{{anchor|Squeezelings2}}
*'''Optimus Prime''' (Series 2, 2023)

:A figure of Optimus Prime in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongside [[Bumblebee (G1)/merchandise#Squeezelings2|Bumblebee]], [[Megatron (G1)/merchandise#Squeezelings2|Megatron]] and [[Optimus Primal (BW)/toys#Squeezelings|Optimus Primal]], in blind bags, or on blister card individually. It was later rereleased as part of the Squeezelings Sidekicks line, bundled with a comic book.

==''Transformers Trading Card Game''==
[[File:W1SOptimusPrimeAL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Autobot Leader''' (2018)
**'''Wave 1S: Starter Set'''
**''Rarity: '''''RT'''
**''Card Number: '''''T03/T04'''
**''Stars: ''7
:Optimus Prime, Autobot Leader is one of four double-sided character cards available in the ''[[Transformers Trading Card Game]]'' Starter Set.

:The artwork for the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile card game.
{{-}}
[[File:W1OptimusPrimeBL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2018)
**'''Wave 1'''
**''Rarity: '''''RT'''
**''Card Number: '''''T29/T40'''
**''Stars: ''13
:Optimus Prime, Battlefield Legend is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The card's Bot Mode line-art was done by [[Guido Guidi]], and Alt Mode line-art by [[Marcelo Matere]] and Alt Mode colors by [[Sara Pitre-Durocher]].

{{-}}
[[File:W1OptimusPrimeFF.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Freedom Fighter''' (2018)
**'''Wave 1'''
**''Rarity: '''''CT'''
**''Card Number: '''''T30/T40'''
**''Stars: ''12
:Optimus Prime, Freedom Fighter is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The Alt Mode artwork on the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile game, while the Bot-mode features line-art by [[Marcelo Matere]] and colors by [[Sara Pitre-Durocher]].
{{-}}
[[File:W2OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Gleaming Commander''' (2019)
**'''Wave 2: Rise of the Combiners'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''11

:Optimus Prime, Gleaming Commander was released as part of the ''[[Transformers Trading Card Game]]'' Wave 2: Rise of the Combiners. Like all other members of [[combiner]] teams released in the set, This version of Optimus Prime is a folding card, with the Bot and Alt modes being depicted when the card is folded in half, and a holofoil portion of the the combined mode depicted when unfolded. The reverse of Optimus Prime, Gleaming Commander depicts the center right portion of [[Optimus Maximus (G1)|Optimus Maximus']], of whom Optimus Prime forms the torso and head.

:The artwork for Bot Mode is reused from the [[Combiner Wars (franchise)|Combiner Wars]] Battle Core Optimus Prime toy's packaging art.

:Optimus Prime, Gleaming Commander can be used to form Optimus Maximus, Ultimate Defender with the use of the Action card [[Enigma of Combination|Sentinel Enigma]] while he and the other Wave 2 Sentinels are in Bot mode on the battlefield and/or KO area.
{{-}}
[[File:W3GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Infantry-Leader''' (2019)
**'''Wave 3: War for Cybertron: Siege I'''
**''Rarity: '''''RT'''
**''Card Number: '''''T07/T48'''
**''Stars: ''11
:General Optimus Prime, Infantry-Leader is one of forty-eight double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege I.

:The card's artwork is based on the ''[[War for Cybertron: Siege|Siege]]'' Voyager-class Optimus Prime toy, with the Bot Mode artwork being reused from the toy's packaging art.
{{-}}
[[File:W4GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Galactic Commander''' (2019)
**'''Wave 4: War for Cybertron: Siege II'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T06/T52'''
**''Stars: ''15

:General Optimus Prime, Galactic Commander is one of fifty-two double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege II.

:The card's artwork is based on the ''Siege'' Leader-class Galaxy Upgrade Optimus Prime toy, which in turn is based on the ''[[Transformers: Cybertron (franchise)|Cybertron]]'' version of Optimus Prime. The Bot Mode artwork is reused from said toy's packaging art, while Alt Mode received new art (lines by [[Marcelo Matere]] and colors by [[Volta]]).
{{-}}
[[File:EEOptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2019)
**'''Wave 1: Energon Edition'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T205/T06'''
**''Stars: ''13

:Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Optimus Prime, Battlefield Legend. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art by [[Marcelo Matere]]
{{-}}
[[File:W5OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Legendary Warrior''' (2020)
**'''Wave 5: Titan Masters Attack'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''12

:Optimus Prime, Legendary Warrior is one of forty-six double sided character cards released as part of Wave 5 of the ''[[Transformers Trading Card Game]]'', Titans Masters Attack. As a character with a body mode, Optimus Prime begins the game with a Titan Master attached in head mode. Once Optimus Prime is KO'd, said Titan Master is deployed.

:The card's artwork is based on the ''Titans Return'' Leader-class Powermaster Optimus Prime toy, with the body mode artwork being reused from the toy's packaging art.

:This card's set was originally set for an April 2020 release, however due to the global COVID-19 pandemic the release was pushed back to May 29, 2020.
{{-}}

==''Magic: The Gathering''==
[[File:MTG-Optimus-Inspiring-Leader.jpg|thumb|upright=1.66|Go ahead, turn me to my other face, see the rules nightmare that happens.]]
*'''Optimus Prime, Inspiring Leader''' (2018)
**''ID number:'' '''002/004'''
**''Set code:'' '''H18'''
**''Color identity:'' '''Red/White'''
**''Casting cost:'' '''{3}{R}{W}'''
**''Artist:'' [[Steve Argyle]]
:Part of the ''[[mtg:Heroes of the Realm|Heroes of the Realm]]'' series of commemorative cards, made by Wizards of the Coast for their employees as rewards for work on specific projects,<ref>[https://www.youtube.com/watch?v=4WNBRWoHq9E Gavin Verhey from Wizards of the Coast explains Heroes of the Realm]</ref> the 2018 "Optimus Prime, Inspiring Leader" card was given to the team behind the ''[[Transformers Trading Card Game]]''. Uniquely, Optimus Prime is "triple-faced" card: a ''Magic'' card on the front side, a ''Transformers Trading Card Game'' card representing Optimus in his alternate mode on the opposite side, and an oversized ''Transformers Trading Card Game'' card representing Optimus in robot mode found by unfolding the card.
:Optimus has the ability to change any permanent (card on the battlefield) to its other face, though sadly that doesn't mean he could convert ''himself'' into a ''Transformers Trading Card Game'' card during a ''Magic: The Gathering'' game.<ref>[https://www.reddit.com/r/magicTCG/comments/e5ovx5/heroes_of_the_realm_promo_optimus_prime_inspiring/ Post by u/Wizards_Drew] on [https://www.reddit.com/r/magicTCG/ r/magicTCG] on Reddit</ref>
:As with all ''Heroes of the Realm'' cards, "Optimus Prime, Inspiring Leader" is not legal to play in any format beyond a specific Commander rule; the cards are novelties designed to be read, rather than played.<ref>[https://markrosewater.tumblr.com/post/189543247703/hi-mark-i-have-2-questions-1-what-are-the Mark Rosewater on Tumblr]: "There’s no plans to release the Heroes of the Realm. The cards aren’t designed to be played. They’re designed to be read."</ref>
{{-}}
{{anchor|MTGHero}}
[[File:MTG-Optimus-Prime.jpg|thumb|upright=1.66|Transform and tap out!]]
*'''Optimus Prime, Hero / Optimus Prime, Autobot Leader''' (2022)
**''ID number:'' '''013/015'''
**''Set code:'' '''BOT'''
**''Color identity:'' '''Blue/Red/White'''
**''Casting cost:'' '''{3}{U}{R}{W}''' (front), '''{2}{R}{W}{B}''' (back with "More Than Meets the Eye")

:"Optimus Prime, Hero" is part of the 2022 ''[[Magic: The Gathering]]'' ''[[mtg:Universes Beyond|Universes Beyond]]'' ''[[mtg:Transformers|Transformers]]'' card set, found in Set Booster and Collector Booster packs of ''Magic''<nowiki>'s</nowiki> ''[[mtg:The Brothers' War|The Brothers' War]]'' set. It can be reversed to become "Optimus Prime, Autobot Leader", representing Optimus in vehicle mode. True to his character, he supports his allies with the "Bolster" mechanic and can return to the battlefield should he [[The many deaths of Optimus Prime|die]] in his Artifact Creature form.
:A variant of this card was available solely in Collector Booster packs, depicting [[Optimus Prime (SG)#Magic: The Gathering|''Shattered Glass'' Optimus Prime]].
{{-}}
{{anchor|MTGSLD}}
[[File:MTG-SLD-Optimus.jpg|thumb|upright=1.66|[[w:Golem|On sale just in time for Hanukkah]].]]
*'''Optimus Prime''' ''(Darksteel Colossus)'' (2022)
**''ID number:'' '''1081'''
**''Set code:'' '''SLD'''
**''Color identity:'' '''Colorless'''
**''Casting cost:'' '''{11}'''

:"Optimus Prime" is part of the ''[[Magic: The Gathering]]'' card pack ''Transformers: Optimus Prime vs. Megatron'', part of the ''[[mtg:Secret Lair|Secret Lair Drop Series]]'' ''[[mtg:Secret Lair Drop Series: December Superdrop 2022|December Superdrop 2022]]'' set. It was available exclusively from [https://secretlair.wizards.com secretlair.wizards.com] from [[December 5]], [[2022]] through [[January 6]], [[2023]].
:Optimus Prime is a [[mtg:Skinned card|reskin]] of the existing ''Magic'' card [https://scryfall.com/card/dst/109/darksteel-colossus Darksteel Colossus], using the same rules and counting as it for all gameplay purposes. Befitting the mighty leader of the Autobots, Optimus is incredibly powerful and impossible to destroy normally, but consequently has a very high casting cost. While the card has printing on both faces, depicting Optimus in robot mode and vehicle mode respectively, both have the same printed abilities and count as a single card for rules purposes—just choose which side you want to display when he enters the battlefield.
: The ''Optimus Prime vs. Megatron'' set also includes [[Megatron (G1)/merchandise#MTGSLD|Megatron]], [[AllSpark#Magic: The Gathering|The AllSpark]], and the bonus card [[Cybertron (planet)|Cybertron]].

{{--}}

==Flame Toys==

===Kuro Kara Kuri===
[[File:FlameToys-KuroKaraKuri-04-OptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (December 2019)
**''Number:'' '''04'''
**''Accessories:'' Large sword, stone, Swords (2), Large axe, Small axe (2), Ion cannon, pairs of hands (5), additional faces (2), Big Turbo Jet Axe with set of hands (exclusive),
**''Sculptor'': Chemical Attack
**''Painting'': Decomas Lab (Hiroyuki Hirose]

:Part of [[Flame Toys]]' ''Kuro Kara Kuri'' line of high-end, non-transforming action figures, Optimus Prime is an original design, though one that bears many similarities to the Don Figueroa design from [[IDW Publishing|IDW's]] ''The Transformers'' vol. 1. He has lots of die cast and LEDs in his head, chest matrix chamber, and both knees. He comes with a multitude of accessories, including a very large sword that can be plugged into a stone, two smaller swords resembling handheld versions of those used by the [[Optimus Prime (Movie)|live-action movie Optimus Prime]], a pair of hatchets resembling those of [[Optimus Prime (Animated)|''Animated'' Optimus Prime]], and of course G1 Optimus Prime's iconic Ion cannon. He also comes with an Orion Pax visorless alternative face, a battle damaged addition face, and five alternative pairs of hands in different poses.
:If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a very large Turbo Jet Axe.
:The reissue (which is labelled as such on the box) uses a slightly different red paint and is the recommended release for use with the Jet Power Armor (see below) due to the paint's extra durability.

{{-}}{{anchor|FlameToysBlackJetPower}}
[[File:FlameToys-KuroKaraKuri-OptimusPrimeJetPowerArmor.jpg|upright=1.66|thumb|And you thought the previous figure was expensive...]]

*'''Optimus Prime Jet Power Armor''' (January [[2024]])
**''Number:'' '''13'''
**''Accessories:'' ''everything...'', Blaster Cannon (exclusive)
**''Sculptor'': Chemical Attack
**''Coloring'': Masashi Watanabe

:Optimus Prime Jet Power Armor is a collection of 23 armour pieces that combine with the previously released ''Kuro Kara Kuri'' Optimus Prime similar to how he combined with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]'' which doubles the size of the figure. If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a blaster cannon.
:As mentioned above, due to addition paint durability, it is recommended to use the re-release of Optimus Prime.

{{-}}

===Furai Model===
[[File:FlameToys-FuraiModel-01-OptimusPrimeAttackMode.jpg|upright=1.66|thumb|'''''X-treme!''''']]
*'''Optimus Prime (Attack Mode)''' (September 2018)
**''Number:'' '''01'''
**''Accessories:'' Ion cannon, axe, 4 hands
{{toydesigner|[[Akira Amemiya]] (concept artist)}}

:Released as part of the ''Furai Model'' line by [[Flame Toys]], "Optimus Prime (Attack Mode)" is an articulated, non-transforming, Voyager Class-sized {{w|Gunpla}}-style model kit. Using parts made of hard ABS plastic and some polycaps, Optimus Prime (Attack Mode) is an original design created by Flame Toys in collaboration with [[Akira Amemiya]] of [[Studio Trigger]].

:For straight-assembly builders, Optimus Prime features a sheet of foil stickers for detail (notably the shoulder insignias), though the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers like ''Gundam Markers'' can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.

:This model kit was later [[redeco]]ed as [[Nemesis Prime (G1)#Flame Toys|Nemesis Prime (Attack Mode)]] and [[Optimus Prime (SG)#Flame Toys|Shattered Glass Optimus Prime (Attack Mode)]].

{{-}}{{anchor|Furai03}}
[[File:FlameToys-FuraiModel-03-OptimusPrimeIDW.jpg|upright=1.66|thumb]]
*'''Optimus Prime (IDW ver.)''' (March 2019)
**''Number:'' '''03'''
**''Accessories:'' Ion cannon, 4 hands
:Optimus Prime (IDW) is a plastic model kit based off of the Optimus Prime design created by [[Don Figueroa]] for [[IDW Publishing]]'s [[The Transformers (IDW)|2009-2011 ''The Transformers'' comic series]]. Similarly to the previous model kit, IDW Optimus is also Voyager-sized.
:This model kit was later redecoed as [[Nemesis Prime (G1)#Furai08|Nemesis Prime (IDW ver.)]] and [[Ultra Magnus (G1)/merchandise#Flame Toys|Ultra Magnus (IDW ver.)]], and it's also used to make the pre-built Furai Action figure (see below.)

{{-}}{{anchor|Furai12}}
[[File:FuraiG1Optimus.jpg|upright=1.66|thumb]]
*'''Optimus Prime (G1 ver.)''' (April 2020)
**''Number:'' '''12'''
**''Accessories:'' Ion cannon, 10 hands, axe
:Optimus Prime (G1) is another plastic model kit, this time a heavily stylized rendition of his cartoon appearance. Like the previous releases, he stands at an approximate Voyager height. He features opening chest windows which reveal sculpted detail of the [[Matrix of Leadership]].

{{-}}{{anchor|Furai16}}
*'''Optimus Prime IDW (Clear ver.)''' (August 2020)
**''Number:'' '''16'''
{{toystub}}

{{-}}
*'''Optimus Prime''' (20??)
:Part of the ''"Deformer Model Kit"'' subline of the ''Furai Model'' line, this Optimus Prime model is a cutesy, "[[super deformed]]" take on the Autobot leader.
{{comingsoontoy}}

===Furai Action===
[[File:FlameToys-FuraiAction-OptimusPrimeIDW.jpg|thumb|Just like one of those second-hand pre-built Gunplas you've seen in Akibahara!]]
*'''Optimus Prime (IDW ver.)''' (January 2020)
**''Accessories'': Ion cannon, 4 hands

:''Furai Action'' Optimus Prime is a pre-assembled redeco of the second ''Furai Model'' kit, with the weathering effects painted on.

{{-}}

==''Playskool Friends''==
[[File:Playskool-Friends-TF-Optimus-Prime.jpg|upright=1.88|thumb|A mouth on his mouthplate? That's a new one.]]
*'''Transformers Collector Pack''' (Canceled)

:Intended to be released as part of the 7-pack for the Playskool Friends lineup, this Optimus Prime is a very adorable non-transforming figurine. He was to come packed with Bumblebee, Arcee, and 4 Rescue Bots: Heatwave, Chase, Boulder and Blades.

:Given the inclusion of the four Rescue Bots, it was ''probably'' unclear if this Optimus Prime is meant to represent his ''Generation 1'' counterpart or his ''[[Optimus Prime (WFC)|Aligned]]'' counterpart.

{{canceledtoy}}

{{-}}

==''Uglydolls''==
[[File:Uglydolls plush collab.jpg|250px|thumb]]
*'''Ox as Optimus Prime''' (2018)
:A collaboration with ''[[Uglydolls]]'' for the 2018 San Diego Comic-Con, the character Ox is dressed as Optimus Prime. He is a limited run exclusive plush, along with Ice-Bat as [[Bumblebee (G1)/merchandise|Bumblebee]].
{{--}}

==McDonald's==
[[File:2018-McD-Authentics-Bumblebee-Optimus-Prime.jpg|250px|thumb]]
*'''Optimus Prime with a sword'''{{sic}} (Happy Meal Toy, 2018)
:Released as part of the [[McDonald's]] June 2018 Happy Meal Toys along with [[My Little Pony]], this Optimus Prime is a super-deformed figurine, and he features a gimmick on his left arm, which can be swung down to reveal a pop-out sword with the press of a button on his back. The sword can be retracted manually by raising the arm.

:The toy was available in South Korea, Italy, Russia, and Malaysia. This toy was rereleased in the US as [[Optimus Prime (Movie)/merchandise#McDonald's 2|Optimus Prime]] for the ''[[Bumblebee (franchise)|Bumblebee]]'' promotion. In Malaysia, this toy is one of the few items that can be found in several hobby toy shops.

{{-}}

==Jada Toys==
===''Metals Die Cast / Hollywood Rides''===
[[File:JadaHollywoodRidesG1OptimusPrime1-24.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2018)
:Released by [[Jada Toys]], this 1/24 scaled non-transforming die-cast truck with rubber tires is based on Optimus Prime's original form and features opening doors to reveal a highly detailed interior with a chromed steering wheel. Similar to the ''[[Robot Powered Machines#Mini-Vehicles|Robot Powered Machines]]'', the truck features a sculpted robot mode underneath. His smokestacks are ''insanely'' long.

:This mold was later redecoed as [[Nemesis Prime (G1)#Jada Toys|Nemesis Prime]].

{{-}}{{anchor|Jada1-32}}
[[File:JadaHollywoodRidesG1OptimusPrime1-32.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2018)
:A medium-sized replica of Optimus Prime much similar to the version above, but with shortened smokestacks. Unlike most other 1/32 vehicles, Optimus does not feature any opening doors, but still retains the sculpted robot mode on his chassis.

{{-}}{{anchor|JadaOP3pack}}
[[File:Jada 1-32 Optimus Prime 3pk.jpg|upright=1.44|thumb]]
*'''Western Star 5700XE Optimus Prime / Optimus Prime / Autobot Optimus Prime''' (Scale 1/32 Die Cast Vehicle 3‑pack, 2022)
:The 1/32 version of Generation 1 Optimus Prime was rereleased in a 3-pack alongside his [[Optimus Prime (Movie)/merchandise#JadaOP3pack|2007 and ''The Last Knight'']] counterparts, neither featuring any notable changes.

{{-}}{{anchor|JadaGhost124}}
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2024)
:A redeco of the 1/24 scaled replica above, this Optimus Prime was released in a crossover with the ''[[Ghostbusters]]'' franchise and is mostly based on the [[Optimus Prime (G1)/Generations toys#Collaborative|MP-10G Optimus Prime Ecto-35 Edition]] figure from the ''[[Transformers Collaborative|Collaborative]]'' toyline, itself based on the original [[Ecto-1]] color scheme, with the addition of some green ghost splatter between the front bumper and the left wheel. Instead of Autobot insignias, this version features the Ghostbusters logo on both sides and the back of the cab, as well as under the chassis right above his robot mode sculpture.

{{-}}{{anchor|JadaGhost132}}
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2024)
:This version of Optimus Prime is a redeco of the 1/32 scaled replica in the same Ghostbusters-inspired deco of the 1/24 version above. The only noticeable difference in colors is the lack of green on its headlights.

===''Metalfigs''===
[[File:JadaMetalfigsG1OptimusPrime.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (4" Die Cast Figure, 2020)
**''Accessories'': Ion blaster, Energon-axe
:''Metalfigs'' Optimus Prime is a 4-inch tall non-transforming super deformed die-cast figure with three points of articulation and light-up eyes.

:He comes with his signature ion blaster and Energon-axe weapons as accessories.

{{-}}{{anchor|DioramaScene}}
[[File:JadaMetalfigsG1DioramaScene.jpg|upright=1.44|thumb]]
*'''Diorama Scene''' (2 3/4" Die Cast Figure 4-pack, 2020)
**''Accessories'': Display backdrop
:A static die-cast figurine of Optimus Prime measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongside [[Bumblebee (G1)/merchandise#DioramaScene|Bumblebee]], [[Starscream (G1)/merchandise#Jada Toys|Starscream]] and [[Megatron (G1)/merchandise#Jada Toys|Megatron]].

:The packaging backdrop can be used as an additional display piece for the set.

{{-}}{{anchor|Metalfigs4pack}}
*'''Optimus Prime / Bumblebee / Optimus Primal / Megatron''' (2 3/4" Die Cast Figure 4-pack, 2022)
:This static Optimus Prime figurine is directly designed after the 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongside [[Bumblebee (G1)/merchandise#Metalfigs4pack|Bumblebee]], [[Optimus Primal (BW)/toys#Metalfigs|Optimus Primal]] and [[Megatron (G1)/merchandise#Metalfigs4pack|Megatron]].

{{-}}{{anchor|Metalfigssingle}}
*'''Optimus Prime''' (2 3/4" Die Cast Figure, 2023)
:The same super deformed Optimus Prime from the 4-pack above is also available in individual packaging.
{{-}}

===''Nano Hollywood Rides''===
[[File:JadaNanoHollywoodRidesG13pack.jpg|upright=1.44|thumb]]
*'''Starscream / Volkswagen Beetle Bumblebee / Optimus Prime''' (1.65" Die Cast Vehicle 3-pack, 2020)
:''Nano Hollywood Rides'' Optimus Prime is a small non-transforming die-cast truck measuring approximately 1.65 inches long. He was released in a 3-pack alongside [[Starscream (G1)/merchandise#Nano Hollywood Rides|Starscream]] and [[Bumblebee (G1)/merchandise#Nano Hollywood Rides|Bumblebee]]. Unfortunately, he doesn't feature a sculpted robot mode underneath like most other Jada vehicles do.
{{-}}

===''Nano Metalfigs''===
[[File:JadaNanoMetalfigsG1-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 1 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:''Nano Metalfigs'' Series 1 Optimus Prime is an incredibly small die-cast figurine molded holding his blaster. He has a little base attached to his feet for balancing reasons.

:He comes in an impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]]. This mold was later redecoed as [[Nemesis Prime (G1)#Nano Metalfigs|Nemesis Prime]] in the Series 2 18-pack.

{{-}}{{anchor|NanoMetalfigs2}}
[[File:JadaNanoMetalfigsSeries2G1BW-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 2 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:A second ''Nano Metalfigs'' Optimus Prime was released in Series 2, now wielding his Energon axe instead of his blaster and doing a bit more of an action pose.

:He comes in ''another'' impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{-}}{{anchor|NanoMetalfigs3}}
*'''Transformers Series 3 18-pack''' (4 cm Die Cast Figure Multipack, 2023)
:For the [[Jada Toys#Nano Metalfigs|third ''Nano Metalfigs'' multipack]], two Optimus Primes were made available at once. One is a re-release of the axe-wielding Series 2 figurine with no noticeable changes, and the other is a golden redeco of the blaster-holding Series 1 figurine.
{{-}}

===Converting RC Vehicle===
[[File:JadaConvertingOptimusPrime.jpg|upright=1.44|thumb|"We have [[Optimus Prime (G1)/toys#Robosen Collector's Edition|Robosen's Optimus Prime]] at home."]]
*'''Optimus Prime Converting R/C''' (2022)
**''Accessories:'' Remote controller
:This Optimus Prime is a remote controlled figure capable of automatically converting between robot mode and truck mode on command.

:He measures approximately 13 inches tall in robot mode and 12 inches long in truck mode, and features lights, sounds and voices.

{{--}}

==''ReAction''==
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2020, 2024)}}</ul>
:*''Accessories'': Ion Blaster

: Released in [[Super7]]'s line of multi-property 3.75-inch action figures, ''[[Super7#ReAction|ReAction]]'' Optimus Prime was naturally part of the first wave of ''Transformers'' figures. It is a non-converting action figure with 5 points of articulation (simple swivel shoulders, legs, and neck) and an [[Ion blaster]] accessory he can only hold in his right hand.

: It should be noted that despite being a "retro-styled" figure, the hard-plastic points on his helmet are very accurate to the animation model and therefore ''incredibly'' pointy, like, "would not be allowed on a toy for the 5-13 set" pointy.

: As with all releases in the ''ReAction'' toyline, Optimus comes packaged in a small cardback that emulates the nostalgic packaging style of [[Kenner]] ''[[Star Wars (franchise)|Star Wars]]'' action figures of the late 1970s to early '80s.

: In late 2024, this figure was reissued with no obvious changes, now in a [[blindpacking|blindpacked]] box assortment.

{{-}}{{anchor|ReActionCyberchrome}}
<ul class="iconlist">{{Bp-a1|'''Cyberchrome Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: This version of the Optimus ''ReAction'' figure features glossy metallic paint. That's about it. Whee.

: This figure was a [[Target]] exclusive in the US, released alongside the "[[Megatron (G1)/merchandise#ReActionCyberchrome|Cyberchrome Megatron]]" figure.

{{-}}{{anchor|ReActionFallenWave4}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: Released in the fourth wave of ''ReAction'', this all-gray version of Optimus features a new torso tooling with open chest panels revealing a (non-removable) Matrix of Leadership.

: This is the first of ''three'' different figures of the same concept to be sold under the name "Fallen Leader Optimus Prime"; the other two (below) are [[Target]] exclusives.

: This figure was initially solicited to retailers as "Dead Optimus Prime" before the slightly gentler name change... but "Dead Optimus Prime" is still what the figure is labeled on the cardback checklist as of wave 6.

{{-}}{{anchor|ReActionSanta}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Christmas]]-themed redeco, "Optimus Santa" features a red and green color scheme, a tufted Santa cap, and his ion blaster is striped to resemble a candy cane.

: This figure is a "shared exclusive" between, multiple online outlets. The card still refers to him as just "Optimus Prime" (albeit in cursive on a gift tag), but the toy is listed as "Optimus Santa" on Super7's website, and "Optimus Prime Santa" on other sites.

{{-}}{{anchor|ReActionFallenTarget}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: This Target-exclusive version of the "Fallen Leader" concept is just the normal Optimus figure with the closed-up chest done in the grays of the initial "Fallen Leader" figure. Exciting! And clearance fodder!

: This figure was released alongside the "[[Megatron (G1)/merchandise#ReActionChromeCommander|Chrome Commander Megatron]]" figure.

{{-}}{{anchor|ReActionGolden}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The third [[Target]]-exclusive Optimus Prime figure, this one has a head-to-toe gold redeco, depicting his appearance in the end of "[[The Golden Lagoon (episode)|The Golden Lagoon]]".

: This figure was released alongside the similarly-decoed [[Megatron (G1)/merchandise#ReActionGolden|"Golden Lagoon" Megatron]] figure.

{{-}}{{anchor|ReActionFallenTargetColor}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The second Target-exclusive "Fallen Leader" version of Optimus, and the third "Fallen Leader" overall (kinda morbid, y'all), and ''fourth'' Target-exclusive Optimus (overkill much?), this is the open-chest version of Optimus in his normal "living" color scheme, now better depicting the Matrix transfer moment when Prime was still (barely) alive.

: This figure was released alongside the thematically-similar [[Megatron (G1)/merchandise#ReActionFallenEvolution|"Fallen Evolution" Megatron]] figure.

{{-}}{{anchor|ReActionOpHalloween}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Halloween]]-themed redeco of the standard Optimus figure, in orange and black. Pumpkinmus Prime.

: This figure was a "shared exclusive", sold through multiple online retailers. Online listings call it "Optimus Prime (Halloween)", but the actual card simply says "Optimus Prime".

<ul class="iconlist">{{Bp-a1|'''Nucleon Quest Optimus Prime''' (2024)}}</ul>
:*''Accessories'': Ion blaster

: Wave eight of ''ReAction'' saw this black redeco of Optimus Prime, inspired by the 2001 [[Optimus Prime (G1)/toys#NucleonQuest|Nucleon Quest Super Convoy]] figure.

{{-}}

*'''Ark Base''' (Playset, 2024)

:*''Accessories'': Ion blaster

: The ''ReAction'' Ark Base playset included a version of Optimus Prime with his chest windows painted to add simulated reflective detail.
{{comingsoontoy}}
{{-}}

==''R.E.D. [Robot Enhanced Design]''==
[[File:TF-R.E.D.-Optimus-Prime.jpg|upright=1.66|thumb|Armored Convoy not included.]]
*'''Optimus Prime''' (2020)
**''Accessories'': Ion Blaster, Energon Axe, [[Matrix of Leadership/toys#R.E.D. .5BRobot Enhanced Design.5D|Matrix of Leadership]], 4 alternate hands
{{toydesigner|[[Emiliano Santalucia]] (concept artist)}}

:Released as part of the first wave of the ''[[Transformers R.E.D.]]'' line, Optimus Prime is a non-transforming 6-inch action figure akin to the ones from Hasbro's ''[[Marvel Comics|Marvel]] Legends'' and ''[[Star Wars (franchise)|Star Wars]] The Black Series'' lines. He is highly articulated and features extensive paint operations for [[show-accuracy]].

:Optimus comes with six hands altogether: a pair of closed fists, a pair of gently beckoning hands, a right hand for his included [[Ion blaster|Ion Blaster]] accessory, and a right hand with the index finger extended. He also features an [[Energon-axe|Energon Axe]], compatible with either wrist in place of his hand. Lastly, he includes a Matrix of Leadership, which can store in his chest thanks to his opening windows.

:As with all ''R.E.D.'' toys, Optimus Prime was a Walmart exclusive in Canada and the United States, and was later made available on [[Hasbro Pulse]] in limited quantities.

: This mold was used to make ''R.E.D.'' [[Ultra Magnus (G1)/merchandise#R.E.D. .5BRobot Enhanced Design.5D|Ultra Magnus]].
{{-}}

==''Super Cyborg''==
[[File:SuperCyborgOptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (2018)
**''Accessories'': Ion blaster, torso plate

:''Super Cyborg'' Optimus Prime is an 11-inch-tall non-transforming figure with 7 points of articulation. Its main distinguishing feature is that the entire front of the robot torso is removable, exposing not just the expected Matrix of Leadership but also many other sculpted mechanical details within Prime's body.

*'''Optimus Prime (clear)''' (2018)
**''Accessories'': Ion blaster, torso plate

:The transparent plastic version of this figure was exclusive to [[San Diego Comic-Con]] 2018.

*'''Optimus Prime (Dead)''' (2018)
**''Accessories'': Ion blaster, torso plate

:This dark grey version was exclusive to [[New York Comic Con]] 2018.

*'''Optimus Prime (Clear Red / Blue)''' (2023)
**''Accessories'': Ion blaster, torso plate

:This translucent version was exclusive to New York Comic Con 2023.
{{-}}

==Figural Bag Clip==
[[File:FiguralBagClip OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2020)
:Released by [[Monogram]], this 2.5" 3D foam bag clip takes the form of a chibi Optimus Prime.

:It was available only as part of a [[Blindpacking|mystery blind bag]] collection.
{{-}}
[[File:FiguralBagClip 2021 Optimus.JPG|thumb]]
*'''Optimus Prime''' (2021)
:A non-articulated, non-transforming 3" figure of Optimus Prime with an attached clip, also released by Monogram.

:Unlike the previous year's release it was sold on a standard cardback.

{{-}}

==D'elicce==
{{note|All Easter eggs listed below were exclusive to Lojas Americanas, a popular Brazilian chain store.}}
[[File:Brazilian Transformers Easter Eggs 2021.jpg|250px|thumb]]
*'''Transformers Easter egg''' (90g, 2021)
:In 2021, [[Brazil]]ian chocolate manufacturer Top Cau, under its kid-focused branch D'elicce, released a pair of ''Transformers''-themed [[Easter]] eggs that included a popcorn bucket of [[super deformed|cutesy proportions]] based on either Optimus Prime or Bumblebee.

{{-}}{{anchor|delicce2025}}
[[File:Brazilian Optimus Prime Easter Egg 2025.jpg|thumb|250px]]
*'''''Transformers'' Easter egg''' (90g, 2025)
:In 2025, D'elicce (or rather "Delice" as its spelled in some parts of this product) released an Optimus Prime-themed egg that came with a single piece of red plastic molded after the character's evergreen truck mode with trailer attached, inside of which the egg comes stored. Unfortunately, it means that not even his wheels can roll.

:The toy comes with a stickersheet that must be applied manually and is not packaged with pre-applied stickers as shown in the official stock photos.

{{-}}

==''Minimates''==
*'''Optimus Prime''' (Series 1, 2021)
**''Accessories'': Laser rifle, energy axe, stand

:Part of the first wave of Transformers [[Minimates]] from Diamond Select, this Optimus Prime is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. The Matrix of Leadership is printed on the Minimate figure's chest and is visible through the windows on the chest covering. Due to their small size, all 4 figures in each series are sold in the same blister card.

*'''VHS Minimates Box Set''' (2022)

:''Minimates'' Optimus Prime was rereleased as part of a [[San Diego Comic-Con]] 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles a [[Family Home Entertainment]] VHS tape. Only 2500 of this set were produced.
{{-}}

*'''Stasis Lock Optimus Prime''' (2023)
:Another San Diego Comic-Con brought another VHS-cassette-themed ''Minimates'' 4-pack exclusive, with another redeco of Optimus Prime - this time depicting him in "stasis lock" (meaning his grey dead color scheme, now with an opening empty chest compartment). Only 1500 of this set were produced.
{{-}}

==''ULTIMATES!''==
[[File:Super7 Ultimates Optimus Prime (G1).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion blaster, energon axe, Matrix of Leadership, surfboard, jetpack, basketball, energy restraints, left & right fists, 2 open hands, right gripping hand, left pointing hand, alternate head

: Part of the first wave of ''[[Super7#Transformers ULTIMATES!|Transformers ULTIMATES!]]'' from [[Super7]], Optimus Prime is a 7-inch-tall action figure based on his cartoon model. He features multi-directional joints at the neck, shoulders, wrists, hips, and ankles; plus swivel biceps, elbows, knees, and a bit of ab crunch. His hands pop out at the wrists so they can be replaced with his additional spare hands in different poses (or the obligatory Energon Axe), and his head can be replaced with an alternate based on the original Optimus toy.

: He also features a ''lot'' of accessories, more than any other toy in the wave, including a number of episode-specific ones: [[Sideswipe (G1)|Sideswipe's]] jetpack from "[[More than Meets the Eye, Part 3]]", a ridable surfboard from "[[The Ultimate Doom, Part 3]]", energy restraints from "[[S.O.S. Dinobots]]", and his giant basketball from "[[The Master Builders (episode)|The Master Builders]]". He also includes a miniature [[Spike Witwicky (G1)#ULTIMATES!|Spike Witwicky]] figurine.

: Preorders for Optimus Prime (and the rest of Wave 1) opened on [[January 29]] 2021, and closed on [[February 28]], with the toys purportedly shipping in winter of that year but not actually arriving until May 2022.

{{-}}{{anchor|Alligaticon}}
[[File:Ultimates Alligaticon.jpg|upright=1.66|thumb]]
<ul class="iconlist">{{Bp-d1|'''Alligaticon''' (2022)}}</ul>
:*''Accessories'': Optimus Prime head; Optimus Prime rifle; Decepticon tower tip w/ arm; [[Battle taxi]]

: Part of the third wave of ''ULTIMATES!'', the [[Alligaticon#Merchandise|Alligaticon]] is a 10-inch-long non-transforming figure made to emulate the the Optimus-parts creature's cartoon model to pretty exacting detail (including the ''lack'' of detail on most of its flat surfaces). It makes ample use of multi-swivel joints to give its limbs a relatively wide range of motion, plus extensive tail jointing, a mid-body bend, some neck waggle, and an opening jaw.

: It comes with multiple "[[City of Steel (episode)|City of Steel]]"-themed accessories, including a tower with Optimus's arm attached to it. The arm is permanently attached, but the hand uses the same wrist-joint as the individual Optimus figure, and can be popped off and replaced with his other hands if you like (Optimus's wrist-pegs are larger than many other figures', so sadly cross-compatibility is limited at best). Curiously, while the arm appears to be identical to the prior figure's arm, the gun is not, having a trigger guard the original version lacks.

: It also comes with Optimus's disembodied head on a ball-jointed "neck" with trailing wires. Like the arm, the head is the same mold as the original Optimus, but this time cast in clear-blue plastic painted over, with a small gap in the back of the head to attempt [[light-piping]]... but depending on the strength of the light, it might just shine through the paint. Since it's the same mold, one could theoretically swap it out, but trying to push that wire-mass back into the socket seems like it'd be a bit of a pain in the neck (wocka wocka!).

: Preorders for the Alligaticon (and the rest of Wave 3) opened on [[December 1]], 2021, with the toys projected to ship in fall 2022... and ''actually'' shipping in November 202''3''.

{{-}}{{anchor|Ultimates2}}
[[File:Super7 Ultimates Optimus Prime (Fallen Leader).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Fallen Leader)''' (2023)}}</ul>
:*''Accessories'': 2 fists, 2 open hands, 2 Matrix-grip hands, trigger-grip right hand, Matrix of Leadership, Matrix cover, ion blaster

: This retool and redeco of ''ULTIMATES!'' Optimus Prime is the latest of several representations of his dead body from "[[The Transformers: The Movie]]," now with a greyscale paint scheme, a heavily damaged left torso section, and cracks all over him (and on his rifle too for good measure). His chest is redesigned to allow it to open and reveal the Matrix.

: Preorders opened in June 2022, with the expectation that of figures shipping in May 2023.... but actually January 2024
{{-}}

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': ion blaster

: The original ''ULTIMATES!'' Optimus Prime was repackaged as a "Transformers Deluxe" figure, physically identical to the first release but now lacking all accessories except the gun. Its new packaging resembles a VHS clamshell box; specifically, the colors and trade dress strongly resemble the [[Video Gems]] tapes, while the character artwork and subtitle are taken directly from the [[The Original Transformers|Kid Rhino]] tapes.

: This piece was exclusive to, of all things, Macy's.

==''Pop!''==
[[File:Funko Pop Optimus Prime G1.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:Released as part of the ''Pop! Retro Toys'' segment, [[Funko Pop!|Funko]]'s ''Pop!'' Optimus Prime is a super deformed vinyl figure based on his original Generation 1 toy, though his eyes are painted blue like in the cartoon.

:This mold was later redecoed as [[Nemesis Prime (G1)#Pop!|Nemesis Prime]].

{{-}}{{anchor|PopMetallic}}
[[File:Funko Pop Amazon Metallic Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:An [[Amazon (website)|Amazon]] exclusive redeco of the figure above, this version of Optimus Prime features a more metallic paintjob.

{{-}}{{anchor|PopGIJoe}}
[[File:Funko Pop Mystery Box Optimus Prime Cobra Commander.jpg|thumb|upright=1.44]]
*'''Funko Mystery Box: Transformers vs. G.I. Joe''' (Giftset, 2021)
**''ID number:'' '''44'''

:Available only as part of a GameStop exclusive giftset, this retooled Optimus Prime comes with his Energon axe attached to his right hand instead of his ion blaster and comes [[Blindpacking|blindpacked]] inside a ''Transformers vs. [[G.I. Joe (franchise)|G.I. Joe]]''-themed lunch box alongside a ''Pop!'' [[Cobra Commander#Pop!|Cobra Commander]] figure, a Decepticon logo decal, a Cobra logo keychain, and a set of four pins of Optimus Prime, Cobra Commander, [[Megatron (G1)/merchandise#Pop!|Megatron]] and [[Duke (G.I. Joe)#Pop!|Duke]].

{{-}}{{anchor|PopJumbo}}
[[File:Funko Pop Jumbo 10-inch Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (Jumbo size, 2021)
**''ID number:'' '''71'''

:A larger version of the regular ''Pop!'' Optimus Prime measuring 10-inches tall.

{{-}}{{anchor|PopKeychain}}
[[File:Funko Pocket Pop Keychain Optimus Prime.jpg|thumb|upright=1.11]]
*'''Optimus Prime''' (Pocket ''Pop!'' Keychain, 2021)

:A smaller version of the regular ''Pop!'' Optimus Prime with a keychain attached to his head.

{{-}}{{anchor|Digital Pop!}}
*'''Optimus Prime''' ([[Funko Pop!#Digital Pop! NFTs|Digital ''Pop!'']], 2022)
**''Rarity:''
***''Monochrome:'' '''Common'''
***''Static:'' '''Common'''
***''Glowing:'' '''Uncommon'''
***''Chrome:'' '''Rare'''
***''Original:'' '''Epic'''
***''Monochrome, Matrix-opening:'' '''Epic'''
***''Gold, Matrix-opening:'' '''Grail'''
:{{W|Non-fungible token|NFT}}s depicting Optimus Prime in the Funko style. Some variants are depicted opening the Matrix over Cybertron, one of which (the Grail one) could be redeemed for a chance to get a physical version of the depicted figure. Said variant was limited to 999 pieces.
<center><gallery heights=200>
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_MONOCHROME.gif|Remember [[The many deaths of Optimus Prime#The Transformers: The Movie|this one?]]
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_STATIC.gif|Not gray, but still may as well be dead.
File:TRANSFORMERS_UNCOMMON_OPTIMUS-PRIME_GLOW.gif
File:TRANSFORMERS_RARE_OPTIMUS-PRIME_REDCHROME.gif|[[The Return of Optimus Prime, Part 1|Oops.]]
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME_ORIGINAL.gif
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME-GOLDVARIANT_MONOCHROME.gif
File:TRANSFORMERS_GRAIL_OPTIMUS-PRIME-GOLDVARIANT_ORIGINAL.gif
</gallery></center>
{{-}}{{anchor|PopDigital}}
[[File:Funko Pop Digital Optimus Prime.jpg|thumb|upright=1.44|Stealing NFTs is the right of all sentient beings.]]
*'''Optimus Prime''' (2022)
**''ID number:'' '''49'''

:Part of the ''Pop! Digital'' segment, this regular-sized vinyl figure portrays Optimus opening the Matrix of Leadership and is entirely painted gold. It could only be acquired by redeeming the Grail NFT above.

{{-}}{{anchor|Pop! Pin}}
[[File:Funko-Pop-Pin-Optimus-Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (''Pop!'' Pin, 2022)
**''ID number:'' '''18'''
**''Accessories:'' Display stand
:A metallic enamel pin based on Optimus Prime's vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

:A "redeco" of this pin as [[Nemesis Prime (G1)#Pop! Pin|Nemesis Prime]] was also released as a limited edition chase variant.

{{-}}{{anchor|Pop! Masks}}
[[File:Funko Pop mask Optimus Prime.jpg|thumb|upright=1]]
*'''Optimus Prime''' (''Pop!'' Masks, 2022)
:Released by Disguise Costumes in collaboration with Funko and exclusive to Walmart, ''Pop!'' Masks Optimus Prime is a large half face mask based on the head of the vinyl figure.

{{-}}{{anchor|Pop! Hallmark}}
*'''Optimus Prime''' (Christmas tree ornament, 2022)
:Released by [[Hallmark]] and also exclusive to Walmart, this Optimus Prime Christmas tree ornament is virtually identical to the vinyl figure in appearance.

{{-}}{{anchor|Fundays1}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Exclusive to a Funko-oriented event called Fundays, this regular-sized vinyl figure portrays [[Freddy Funko]] cosplaying as Optimus Prime. The body of this figure is the same as the regular Optimus, while the head has been modified to incorporate Freddy's face. This regular version was limited to 1500 pieces.

{{-}}{{anchor|Fundays2}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:A metallic version of the Freddy Funko as Optimus Prime figure was also available, now limited to only 500 pieces.

{{-}}{{anchor|Fundays3}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Also available and limited to 500 pieces was a version of Freddy Funko as Optimus Prime that glows in the dark.

{{-}}{{anchor|PopPotato}}
*'''Mr. Potato Head Optimus Prime''' (''Pop! Digital Retro Toys'', 2022)
**''Rarity:'' '''Grail'''
**''ID number:'' '''127'''
:Similar in concept to other [[Mr. Potato Head]] toys, this vinyl figure is a representation of said character taking the appearance of Optimus Prime, except it can't be taken apart piece by piece.

:This figure is limited to 1550 units and can only be acquired redeeming an NFT representing this version of the character.

{{-}}{{anchor|PopLights}}
*'''Optimus Prime''' (Lights and Sounds, 2023)
**''ID number:'' '''120'''
**''Accessories:'' Base
:A standard-sized figure released in the ''Retro Toys'' line, "Lights and Sounds" Optimus Prime features... well, lights and sounds. He also includes a display base, and is posed with his left arm pointing forward and his right hand holding his blaster.

:This figure is exclusive to the Funko Shop online store.

{{-}}{{anchor|Pop! Tee}}
*'''Optimus Prime Tee''' (T-shirt, 2023)
:A T-shirt available on Funko's online store, it features artwork of ''Pop!'' Optimus Prime in the same pose and style as the original Generation 1 Optimus Prime packaging art.

{{-}}{{anchor|Pop40Years}}
*'''Optimus Prime''' (2024)
**''ID number:'' '''131'''

:Released in celebration of the 40 years of the franchise, this regular sized ''Pop! Retro Toys'' Optimus Prime is a similar mold to the original release, but is doing a different pose and features toy-accurate yellow eyes.

{{-}}{{anchor|Pop40Years2Pack}}
*'''Optimus Prime & Megatron''' (2-pack, 2024)

:A Hot Topic exclusive release of the 40th anniversary Optimus Prime and [[Megatron (G1)/merchandise#Pop40Years2Pack|Megatron]] vinyls with a metallic finish to their paintings.
{{--}}

==Modern Icons==
[[File:Modern_Icons_Optimus_Prime_helmet.jpg|thumb|upright=1.66|GIVE ME MY FACE.]]
*'''Optimus Prime Modern Icons Replica Helmet''' (December 27, 2021)
:A collaboration between Hasbro and statue and replica brand Modern Icons, this is a wearable helmet for adult collectors, based on Optimus Prime's head. It features light-up eyes and authentic sounds and phrases.

:Originally due for release on August 16, 2021, the Optimus Prime helmet was delayed until December 27 (as was [[Megatron (G1)/merchandise#Modern Icons|its Megatron counterpart]]). The helmet is a GameStop exclusive in the United States.
{{--}}

==''Super Shogun''==
*'''Optimus Prime''' (2021)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Another "retro-styled" non-transforming figure by [[Super7]], ''Super Shogun'' Optimus Prime is meant to be an homage to the 1970s "{{w|Shogun Warriors (toys)|Shogun Warriors}}" toyline. To match the famous features of those older toys, this Optimus stands 24" tall and is mostly made of hollow plastic, with 3 points of articulation, wheels on his feet, and a spring-loaded firing left fist. His chest doors open to reveal a removable Matrix of Leadership. Suggested retail price was $350 - hopefully if you're old enough to remember "Shogun Warriors" you've gotten a good job by now.

*'''Optimus Prime (Fallen Leader)''' (2022)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Continuing the trend from their ''ReAction'' and ''ULTIMATES!'' Optimus Prime figures above, Super7 also produced a grey redeco of ''Super Shogun'' Optimus Prime representing his dead body. {{-}}

==''Zōteki''==
[[File:ZOTEKI-024-Optimus-Prime.jpg|thumb|upright=1.66|I farted.]]
*'''Optimus Prime''' ([[2021]])
**''ID number'': '''024'''

:A collaboration between [[Hasbro]] and statue/replica brand [[Jazware]], ''[[The Transformers (franchise)|The Transformers]]'' was added as a part of the ''[[Zōteki]]'' line alongside other iconic brands such as [[Marvel Comics|Marvel]], to recreate some of the main "Generation 1" characters. The 24th figure of the ''Zōteki'' line; Optimus Prime wields his iconic [[Ion blaster]].

:Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
{{-}}

==Eaglemoss==
[[File:EaglemossChess OptimusPrime.jpg|upright=1.11|thumb]]
* '''Transformers Gen-1 Chess Set''' (<s>2021</s>)
:In the planned [[Chess#Eaglemoss|Transformers Chess Set]] by [[Eaglemoss]], a relatively large and very well detailed statue of Optimus Prime was slated to be the standard King piece on the Autobot side.

:A Kickstarter campaign to raise the necessary funds for this project was launched, but failed to meet its goal by September 24, 2021 and the whole thing was canceled. The Optimus Prime piece managed to technically get a very limited release, however, as some online influencers in the ''Transformers'' fandom received copies gifted to them by Eaglemoss during the Kickstarter campaign.
{{canceledtoy}}
{{-}}

==e-HOBBY==
===''Transformers Character Card''===
{{anchor|TCC G1}}
[[File:Transformers Character Card G1 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Convoy & Megatron Set''' ([[January 25]], [[2022]])
**''ID number:'' '''01 & 02'''
{{toydesigner|[[Shin Sasaki]] (illustration)}}

:Released as part of the first wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Roller (G1)|Roller]]) and [[Megatron (G1)|Megatron]] (with [[Starscream (G1)|Starscream]], [[Thundercracker (G1)|Thundercracker]] and [[Skywarp (G1)|Skywarp]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#01|Translation of G1 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Laser}}
[[File:Transformers Character Card G2 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Battle Convoy & Megatron Set''' ([[March 14]], 2022)
**''ID number:'' '''11 & 12'''

:Released as part of the second wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime and Megatron in their ''[[Transformers: Generation 2 (franchise)|Generation 2]]'' bodies along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#LaserOptimusPrime|Laser Optimus Prime]]" toy.
::*''[[Source:Transformers Character Card#11|Translation of G2 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Black}}
[[File:Transformers Character Card Megatron Black and Convoy Black.jpg|upright=1|thumb]]
*'''Transformers Card Binder (includes 2 special cards)''' ([[November 1]], 2022)
**''ID number:'' '''EX'''

:Released in its fifth wave as something of a "season one finale" to the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this 40-slot binder intended to contain the entire ''Character Card'' series thus far is packed with a pair of holographic trading cards depicting super-deformed art of Optimus Prime and Megatron in the forms of their first e-HOBBY exclusive toys along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the ''[[Hybrid Style]]'' "[[Optimus Prime (G1)/toys#THS02B|Convoy Black Version]]" toy.
::*''[[Source:Transformers Character Card#EXOP|Translation of Optimus Prime Black Version's Transformers Character Card]]''
{{-}}

{{anchor|TCC Hero}}
[[File:Transformers Character Card Jhiaxus and Hero OP.jpg|upright=1|thumb]]
*'''Jhiaxus & Convoy Missile Trailer Set''' ([[February 6]], [[2023]])
**''ID number:'' '''41 & 42'''

:Released as part of the sixth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Jhiaxus (G2)|Jhiaxus]] and ''Generation 2'' Optimus Prime along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#HeroOptimusPrime|Hero Optimus Prime]] toy.
::*''[[Source:Transformers Character Card#42|Translation of Hero Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Matrix}}
[[File:Transformers Character Card Matrix and Alpha Trion.jpg|upright=1|thumb]]
*'''Alpha Trin & Convoy Set''' ([[April 22]], 2023)
**''ID number:'' '''49 & 50'''

:Released as part of the seventh wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of "[[Alpha Trion|Alpha Trin]]" and Optimus Prime touting the [[Matrix of Leadership]] along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus's card notably eschews the line's usual [[Power Plans]]-inspired motif for a reproduction of the original 1984 [[Package art#Hasbro|toy packaging mural]] in celebration of the line's 50th release.
::*''[[Source:Transformers Character Card#50|Translation of Optimus Prime (with Matrix)'s Transformers Character Card]]''

{{-}}

{{anchor|TCC Orion}}
[[File:Transformers Character Card Hot Rod and Orion Pax.jpg|upright=1|thumb]]
*'''Orion Pax & Hot Rodimus Set''' ([[August 14]], 2023)
**''ID number:'' '''59 & 60'''

:Released as part of the eighth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Orion Pax and "[[Hot Rod (G1)|Hot Rodimus]]" along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#59|Translation of Orion Pax's Transformers Character Card]]''

{{-}}

{{anchor|TCC Action}}
[[File:Transformers Character Card Action Master Megatron and OP.jpg|upright=1|thumb]]
*'''Convoy (Action Master) & Megatron (Action Master) Set''' ([[December 28]], [[2024]])
**''ID number:'' '''93 & 94'''

:Released as part of the thirteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Armored Convoy]]) and Megatron (with [[Neutro-Fusion Tank]]) in their [[Action Master]] forms along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#93|Translation of Action Master Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Autobot}}
[[File:Transformers Character Card Autobots and Primus.jpg|upright=1|thumb]]
*'''Primus and Cybertron Army Set''' ([[February]], [[2025]])
**''ID number:'' '''101 & 102'''

:Released as part of the fourteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Primus]] in the form of his [[Primus#2010|"Creator" toy]] and the Generation 1 [[Autobot]]s (as represented by Optimus Prime, [[Blaster (G1)|Blaster]], [[Eject (G1)|Eject]], [[Grimlock (G1)|Grimlock]], [[Prowl (G1)|Prowl]], [[Crossblades (G1)|Crossblades]], [[Jazz (G1)|Jazz]] and [[Turbo Board]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#102|Translation of the Autobots' Transformers Character Card]]''

{{comingsoontoy}}
{{--}}

===Acrylic keychain series===
[[File:E-Hobby Optimus Prime and Bumblebee keychains.jpg|upright=1|thumb]]
*'''Convoy & Bumble''' ([[October]], [[2022]])

:Released as part of the first wave of an [[e-HOBBY]] exclusive series, this pair of keychains depicts character art and assets re-used from Optimus Prime and [[Bumblebee (G1)|Bumblebee's]] [[The Transformers: Masterpiece|''Masterpiece'']] releases, namely [[Optimus Prime (G1)/toys#MP44|MP-44 Convoy]] and [[Bumblebee (G1)/toys#MP45|MP-45 Bumble and Spike 2.0]] respectively.

{{--}}

==''Authentics''==
{{anchor|ClipBot}}
[[File:ClipBotsPrime.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2018)

:''Clip Bots'' Optimus Prime is a small [[super deformed]] plush that can be "transformed" into a little tractor trailer by flipping it inside out. It features a plastic clip so it can dangle from whatever you clip it to.
{{-}}
{{anchor|22Mask}}
[[File:Authentics Optimus Prime Mask 2022.jpg|upright=1|thumb|Unlike some Optimus Primes, he'll [[Transformers: Revenge of the Fallen (film)#Quotes|give you his face]] instead.]]
*'''Optimus Prime''' (2022)

:Modeled after Optimus Prime's evergreen design, this [[roleplay toy]] mask was released along side an [[Bumblebee (G1)/merchandise#22Mask|Bumblebee]] version.
{{-}}
{{anchor|AquaPals}}
[[File:AquaPalsLargeOptimus.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2023)

''Aqua Pals'' Optimus Prime was released by [[WAHU]]. It is a plush made out of material designed to dry quickly, allowing it to be played with in water. The large plush is 24 inches tall.
{{-}}

{{anchor|DogToys}}
[[File:CrunchandsqueakOptimusPrime.jpg|upright=1|thumb]]

*'''Crunch & Squeak Optimus Prime''' (2023)

Manufactured by [[Gramercy Products]], ''Crunch and Squeak'' Optimus Prime is a simple dog toy, with a water bottle inside to be crunched. Because of this, its legs are fully attatched to each other. The embroidery color for the outline of the eyes varies, coming in gray or blue.
{{-}}
*'''Squeak & Tug Optimus Prime''' (2023)

''Squeak & Tug'' Optimus Prime is another dog toy by Gramercy Products. It has two rope knots connected from the bottom of each of its legs, for tugging purposes. It also has a mouth ''on top'' of its faceplate.

{{anchor|24Mask}}
[[File:Authentics_Optimus_Prime_Mask_2024.jpg|upright=1|thumb]]
*'''Optimus Prime Mask''' ([[2024]])

:Manufactured by [[Peachtree Playthings]], this mask is a completely new mold based on Optimus Prime's evergreen design, though it's a bit more stylized then the 2022 version. It was found at discount stores such as Dollar Tree with no prior announcement. As with the previous mask, it was released along side an [[Bumblebee (G1)/merchandise#24Mask|Bumblebee]] version.
{{-}}
{{anchor|CBoptimus}}
[[File:Authentics Cyber Battlers Optimus.jpeg|upright=1|thumb]]
*'''Cybertron Battlers Optimus Prime''' ([[2022]])
:Released in the ''Cybertron Battlers'' subline of ''Authentics'', this vinyl figure is a non-transforming, 5.5 inch rendition of Optimus Prime in his evergreen design with limited points of articulation. He has an Energon Axe molded into his right hand.

:He comes packaged either individually with a tag, or in twos in a box together with [[Bumblebee (G1)/merchandise#Authentics|Bumblebee]] and [[Megatron (G1)/merchandise#Authentics|Megatron]].
{{-}}

{{anchor|Teeturtlereverse}}
[[File:Small_Reversible_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Reversible Plushie Optimus Prime''' (2025)

:Released by [[TeeTurtle]], ''Reversible Plushie'' Optimus Prime is a round, [[super deformed]] plush, that can be turned inside out to reveal a truck alternate mode. A 3 inch version was released in blind boxes, while a 6 inch version was made available exclusively at [[Walmart]]. It appears to be based on Optimus Prime's [[evergreen]] design, with a license plate that reads 'ROLL OUT'.
{{-}}
{{anchor|Teeturtlecloudhead}}
[[File:Cloudheads_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Cloudheads Optimus Prime''' (2025)

:Also released by [[TeeTurtle]], ''Cloudheads'' Optimus Prime is another [[super deformed]] plush based off of Optimus's [[evergreen]] design. It is 5 inches tall. It has a large head, and its body is weighted with glass beads.
{{-}}

==Nendoroid==
[[File:Nendoroid G1 Optimus Prime.jpg|upright=1.66|thumb]]
*'''Nendoroid Optimus Prime (G1 Ver.)''' ([[2022]])
**''Nendoroid ID Number'': '''1765'''
**''Accessories'': Ion blaster, Energon-axe, pointing hand

:[[Nendoroid]] Optimus Prime is a [[super deformed]], adorable rendition of the original Autobot commander. It is the first Nendoroid figure released for a "Generation 1" character, as the first Nendoroid figures for ''Transformers'' were for the ''[[Bumblebee (film)|Bumblebee]]'' movie.

:As with most Nendoroids, Optimus Prime can interchange body parts with compatible figures, and comes with an alternative "pointing hand" accessory to aid with specific posing. The figure is packed with Optimus's trademark Ion blaster and Energon-axe weapons (generically referred to as a gun and an energy axe by the Good Smile Company website), the latter of which replaces Optimus's hand when wielded. He also features articulation at the head, knees, shoulders, elbows, and even his chest.

:This mold was later redecoed as [[Nemesis Prime (G1)#Nendoroid|Nemesis Prime]].
{{-}}

==Icon Heroes==
*'''Optimus Prime X Bumblebee Retro Pin Set''' (2022)
: A hard enamel pin based on Optimus Prime's original G1 package art made by Icon Heroes. It comes carded with a [[Bumblebee (G1)/merchandise#Icon Heroes|Bumblebee]] pin.

: This pin was also available in [[Nemesis Prime (G1)#Icon Heroes|Nemesis Prime]] colors.
{{comingsoontoy}}

{{-}}
[[File:Icon-Heroes-Optimus-Prime-Action-Statue.jpg|upright=1.11|thumb|''Of course'' we need another superdeformed Optimus Prime statue, why do you ask?]]
*'''Optimus Prime Action Statue''' ([[2023]])
: A 12" tall polystone statue of Optimus Prime holding his ion blaster and standing over an Autobot insignia base. The statue is slighty superdeformed with an unusually large head and features some neck articulation.

: Each sample is going to be individually numbered and come with a certificate of authenticity.
{{comingsoontoy}}

{{-}}

==Just Play==
{{anchor|Podpals}}
[[File:PodpalsOptimusLarge.jpg|upright=1|thumb]]

*'''Podpals Optimus Prime''' (2023)

Made by [[Just Play]], ''Podpals'' Optimus Prime is a rounded plush. It has tiny flaps of fabric for its legs and head details, while other details are printed on. There are two versions, an 8 inch version and a 3 inch version. They are identical besides their size.

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>

:Optimus Prime is a small, soft plastic figure, 2" tall, with no articulation. It's overall based on his appearance in the G1 cartoon. He does have a noticable lack of paint apps; most notably the windows on his chest not being painted at all.

:The packaging is G1-styled with the classic black-red gradient and the G1 Optimus Prime toy in the top right corner.

[[File:JustPlay_G1_Optimus_Prime.jpg|thumb|upright=.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>

:This figure is identical to the original release. Unlike the original release, however, he also comes with a foil sticker depicting his G1 design on a card with a sort of profile picture on the back and text underneath it saying "OPTIMUS PRIME IS THE LEADER OF THE AUTOBOTS." The packaging is also different as it no longer features Optimus Prime (having been replaced with a block advertising the new card).
: There's a variant of this found at stores like Dollar Tree where the block advertising the card is moved to the top left with a red circle that says "$1.25" in it in the top right instead.

{{-}}

==Kotobukiya==
===Bishoujo Series===
[[File:Bishoujo-Series-OptimusPrime.jpg|upright=1.3|thumb|Looking this good is the right of all sentient beings.]]
*'''Bishoujo Series Transformers Convoy/Optimus Prime''' (January 2023)
**''Accessories'': Alternate masked face
**''Known designers:'' [[Shunya Yamashita]] (artist)

:''[[Kotobukiya]] [[Bishoujo Series]]'' Convoy/Optimus Prime renders the classic Autobot commander as a cute anime girl (formally termed as a ''{{w|Bishōjo}}''). Bishoujo Optimus's necklace represents the [[Matrix of Leadership]], while Prime's trailer and wheels are represented as her suitcase and boots respectively.

:''Bishoujo Series'' Optimus Prime also comes with an alternate [[Mouthplate|masked]] headpiece, and a red display base designed after the Autobot insignia. A Deluxe Edition release also included a B5-sized acrylic board for display, featuring Yamashita's original artwork of the character.

:This statue was later recolored and retooled to create ''Bishoujo Series'' [[Nemesis Prime (G1)#Kotobukiya Bishoujo Series|Nemesis Prime]].
{{-}}
===Frame Arms Girl===
[[File:Kotobukiya-TF-Optimus-Prime-Fumikada-Shimane-Ver-kit.jpg|thumb|upright=1.66|Minerva's <s>Ginrai</s> Optimus Prime cosplay.]]
*'''Convoy/Optimus Prime Humikane{{sic}} Shimada Ver.''' (June 2025)
**''Accessories'': 5 pairs of hand parts, 2x2 Faceplates (Android, Human), Front hair/helmet parts for human face config, Ion Blaster, Energon Axe
**''Known designers:'' [[Fumikane Shimada]] (artist)

:Designed by Humikane (actually "Fumikane") Shimada of ''Frame Arm Girls'' and ''30 Minutes Sisters'' fame, this 135mm articulated ''FA Girl'' model kit (though technically not referred to as such on the box, she is listed as part of the ''FA Girl'' product line on Kotobukiya's website) of Optimus Prime/Convoy is another personified take of the character compared to the ''Bishoujo Series'' statue above. Aside from her hand parts and the two signature weapons, Optimus also comes with two types of faceplates, with two expressions for each, and a few front hair/helmet parts for each configuration. The rear truck wheels on her legs can be flipped down to form a pair of support skates.
{{--}}

==Micro Machines==
[[File:MMMPrime&Tracks.jpg|upright=1.66|thumb]]
*'''Optimus Prime Hauler Playset''' (2022)
**''Accessories'': [[Tracks (G1)/toys#Micro Machines|Tracks]] vehicle, decoder
{{charstubtoys}}

==XM Studios==
*'''Optimus Prime''' (2022)

:This hand-painted porcelain statue of Optimus Prime stands over 26" tall and features alternate arms to allow owners to display him in different poses or switching out his signature laser rifle for his energon axe. His chest-mounted Matrix of Leadership lights up, and the set also includes a sculpted version of the truck mode to display next to the robot. Suggested retail was about $1,700.

*'''Optimus Prime Bust''' (2023)

:A four-foot-tall bust of Optimus Prime, with hand-burnished metallic features and a $4,000 price tag.
{{-}}

==''Transformers × Mini World''==
[[File:MiniWorldOptimus.jpg|thumb|upright=1.66]]
*'''Optimus Prime''' (2023)
**''Accessories'': Transforming base, gun, axe, 2 smokestacks, machine part, crane arm, 2 connectors

:''[[Transformers × Mini World]]'' Optimus Prime is a tie-in to the popular [[China|Chinese]] game ''[[Mini World]]''. It comes with a display base which can fold up into a cube-shaped representation of Prime's truck mode, complete with rolling wheels. The figure can transform into a storage mode and store fully inside the cube, or you can remove his head and replace it with the folded up cube. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and axe accessories. The set includes two smokestacks that can be pegged onto the truck-cube mode.

:Each set includes [[Build a Figure]]-like machinery components which can be combined with parts from other sets to make new structures.

:It is exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.
{{-}}

==Mochibots Transformers Plush==
[[File:MochibotsPrime.jpg|upright=1.3|thumb|It was either this or a banana to show how tall I am. And I'm ''NOT'' Primal!]]
<ul class="iconlist">{{Bp-a1|'''Mochibots "Transformers" Plush Convoy''' (2023)}}</ul>
:Apart of the line of cute, cuddly Transformers Plushies, [[Mochibots Transformers Plush|Mochibots]] Convoy (otherwise known as ''Optimus Prime'') is a 5.5 CM tall variation of the character, with Sunbow cartoon-accurate white pants and all! This Convoy is given a "Fumo" stylization, making the robotic detailing more rounded and soft, with stubby limbs and a cute, somewhat stern expression. Every detail is sewn-in, leading to him and the rest of the Mochibots line having a premium feel, with added texture and depth added to each detail. In addition to all this cute Convoy's offerings, he has a block of stuffed material in the back to represent his "Backpack", and a stitched-on Autobot logo! Though, much like [[Cliffjumper (G1)/toys#Mochibots Transformers Plush|Cliff]], the Autobot logo seems to have a squinting expression, likely a limitation of how far the detail can go with this process. Like many other Mochibots, Convoy also features a special, reflective material in his eyes and windows, with light giving it a special shimmer effect whenever it hits it.

:Convoy was released in the Summer of 2023 in "Volume 1" of the Mochibots line, alongside Cliff, Bumble, and Convoy's Shattered Glass counterpart. This line was exclusive to China and Japan, with almost all of them being locked to Asia via [[amiami|amiami's]] digital storefront.

{{-}}

==Fools Paradise==
{{anchor|LOWFOOL}}[[File:LOWFOOL League of Steel Optimus Prime.jpeg|upright=1.66|thumb|Some contrast to the bishoujo, huh?]]
*'''Optimus Prime''' (2023)
**''Accessories'': Football

:Part of a collaboration between Hasbro and [[Hong Kong]]-based online store ZCWO, Optimus Prime joins the "League of Steel" subline of [[Fools Paradise]]'s LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues of [[Neon Genesis Evangelion|Evangelion]]s and {{w|Gundam}}s. He is depicted as a human man wearing heavily Optimus Prime-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache (not, as you might surmise, as a reference to [[Peter Cullen]]'s own face fuzz).

:Preorders for Prime opened in June 2023, with a projected release date of November.

{{-}}

{{anchor|ZCWO}}[[File:Fools Paradise Optimus Prime statue.jpeg|upright=1.3|thumb]]
*'''Optimus Prime''' (2024)

:A second statue of Optimus Prime by Fools Paradise portrays Optimus Prime in a much more conventional (if heavily stylised) design. This vinyl statue of Prime stands approximately 60cm tall, and features light up LED eyes and apparently boasts a full range of articulation. It also features a somewhat weathered paint job.

:Preorders opened in November 2023, with a projected release date of March 2024.
{{comingsoontoy}}

{{-}}

==McFarlane Toys==
{{anchor|PagePunch}}[[File:Page Punchers Optimus Prime and Megatron.jpeg|upright=1.66|thumb|If you squint, you can just ''barely'' make out the lack of a waist swivel.]]
*'''Optimus Prime and Megatron''' (2024)
: ''[[Page Punchers]]'' Optimus Prime is 3-inch non-transformable action figure based off his [[IDW Publishing|IDW]] design.

: He comes in a two-pack with [[Megatron (G1)/merchandise#PAGEPUNCH|Megatron]], packaged with [[New Cybertron Part 1: To Walk Among the Chosen|''Optimus Prime'' #1]] and [[Dissolution Part 6: This Machine Kills Fascists|''Lost Light'' #6]].

{{-}}

==''Hot Wheels''==
{{picsneeded}}
{{anchor|HWTrackFleet}}
[[File:Hot Wheels Track Fleet Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1| '''Optimus Prime''' (Track Fleet, 2024)}}</ul>
:*''Accessories'': Trailer (detachable)
{{toydesigner|[[Charlie Angulo]] ([[Mattel]])}}
:''[[Hot Wheels (franchise)|Hot Wheels]]'' Track Fleet Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Unlike the concurrently released [[Bumblebee (G1)/merchandise#HWScreenTime|''HW Screen Time'' Bumblebee]], Optimus does ''not'' have a sculpted robot face on his undercarriage.

{{-}}{{anchor|HWSkate}}
[[File:Hot Wheels Skate Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Skate, 2024)}}</ul>
:*''Accessories'': Finger sneakers
:Part of the ''Hot Wheels Skate'' subset, this is an Optimus Prime-themed finger skateboard that comes with a pair of red finger sneakers. The shape and packaging use Dreamwave-era artwork of Optimus Prime.

{{-}}{{anchor|HWScreenTime}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (HW Screen Time, 2025)}}</ul>
:*''Mainline ID number:'' 104/250
:*''HW Screen Time ID number:'' 6/10
{{toydesigner|[[Manson Cheung]] and Leeway Chang ([[Mattel]])}}
:''Hot Wheels'' HW Screen Time Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Compared to the ''Track Fleet'' version, this version of Optimus ''has'' a sculpted robot face on his undercarriage, is larger and does not feature a trailer. It is largely based on the transforming ''Mattel Creations'' version of Optimus but with some modifications for cost reasons.

{{--}}

==''Beyblade X''==
[[File:Beyblade_X_Transformers_OptimusPrime.jpg|thumb|Not pictured: Optimus Prime using this to part the Red Sea.]]
*'''Optimus Prime and Megatron Multipack Set''' (2024)

:'''Optimus Prime 4-60P''' was available in a two-pack with [[Megatron (G1)/merchandise#Beyblade X|Megatron 4-80B]], which was exclusive to Amazon in Hasbro territories, and exclusive B4-sponsored stores in Takara-Tomy territories. It consists of three pieces that can be interchanged with those of [[Beyblade#BEYBLADE X|other ''Beyblade X'' tops]]; an attacking "Blade" primarily made of metal, a "Ratchet" that locks parts together and determines height, and a "Bit" that touches the ground and determines movement.

:The "Optimus Prime" Blade features evergreen art of Optimus Prime on its central Gear Chip and is partial of the mainline ''Beyblade X'' Blade "Helm Knight". The Ratchet (4-60) and Bit (Point) are recolored parts from other ''Beyblade X'' tops.

:In Hasbro territories, a QR Code sticker hidden underneath the Blade can be scanned into the ''Beyblade X'' companion app. In Takara-Tomy territories, the QR Code stickers are omitted in favor of a Beycode Card packed with the instructions. However, scanning any of these QR codes only awards the player with in-app points, and will not unlock the Beyblade for in-game use like it would for any mainline ''Beyblade X'' tops.

{{-}}

==Yolopark==
===AMK===
{{anchor|AMKPro}}
[[File:YoloparkAMKProG1OptimusPrime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released as part of Yolopark's AMK Pro line, Optimus Prime comes in pre-assembled modules as opposed to traditional model kit runners. This allows him to be assembled quickly and easily without tools. Unlike Yolopark's regular AMK line, the AMK Pro line features diecast parts as well as light-up features. In Prime's case, his eyes will light up when tapping his head with a magnet. The feature requires one CR927 battery which is not included.

:The fully assembled figure resembles the ''Masterpiece'' Convoy 3.0 and features an opening Matrix chamber and fully articulated hands, eliminating the need for alternate hands. Both the ion blaster and Megatron gun can be wielded by his hands, though removing the stalk from the Megatron gun makes this much easier.

:The figure was redecoed into Nemesis Prime.

{{-}}
{{anchor|AMKHasbroEdition}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Hasbro Edition, 2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Stand with Teletraan-1 Backdrop

:The AMK Pro Optimus Prime kit is re-released under the "Hasbro Edition" branding. In this release, the die-cast parts have been replaced with plastic, and the light-up feature and the Megatron gun accessory are no longer included. In addition, Prime's display stand also comes with an additional Teletraan-1 backdrop for the arm unit.

{{-}}
{{anchor|AMKComboSet}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-and-Megatron-Combo-Set-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Megatron and Optimus Prime Combo Set''' (2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Energy Mace, Light Sword, Laser Pistol, Two display stands (Teletraan-1 Backdrop, Ark Backdrop)

:The "Hasbro Edition" of the AMK Pro Optimus Prime kit is also sold as a two-pack with the same line's Megatron. The 2-pack also comes with a unique pin.

{{-}}{{anchor|AMKClear}}
[[File:Yolopark-TF-Cybertron-Con-2024-AMK-Pro-Optimus-Prime-Clear.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Clear Color)''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released exclusively for the Cybertron Con 2024 in Shanghai (and later in the Yolopark online store), this Optimus Prime is a translucent redeco of the AMK Pro kit.

{{-}}{{anchor|2025AMK}}
[[File:Yolopark-TF-AMK-Optimus-Prime-(2025).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK, 2025)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Matrix of Leadership]]

:This AMK Optimus Prime only comes with his Ion Blaster and the Matrix of Leadership. In addition, He also features cartoon-based colors, complete with opaque chest windows. As the original mold's joints were meant to be molded in die-cast or metallic gray plastic, these areas were also molded in the same white plastic.
{{-}}

===AMK Mini Series===
[[File:TF-Yolopark-AMK-Mini-Series-Optimus-Prime.jpg|thumb|upright=1.66|Swap my right arm with Megatron's so I could go to the offensive!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': 2 additional pairs of hands (Splayed, Pointing), [[Ion blaster]]

:The ''AMK Mini Series'' Optimus Prime is a smaller version of the character, featuring swappable hand parts and his usual Ion Blaster.

:Initial images of the kit's hand-painted prototypes showed Prime utilizing a desaturated blue and red. His white parts are slightly darker, while his grill and abs are flat grey, and the chest windows are white. Unlike the prototype, the blue paint on the crotch is missing in the final product.

:Optimus Prime is sold as either an individually marked single, a 2-pack with the same line's Megatron in a single box, or as a blind-box figure. This mold was also used to make [[Nemesis Prime (G1)|Nemesis Prime]] for the blind-box line, and [[Delta Magnus]] for the Agabyss-organized ''[[BotCon]] 2024'' exclusive House of Magnus BotCon VS Set.

{{-}}{{Anchor|AMKMiniIDW2005}}
<ul class="iconlist">{{Bp-a1|'''Orion Pax (IDW)''' (2025)}}</ul>

:This ''AMK Mini Series'' kit is based on Orion Pax's appearance in the 2005 ''IDW'' comics.

{{comingsoontoy}}
{{-}}

===BMK===
[[File:Yolopark-BMK-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Accessories'': [[Ion blaster]]

:The ''BMK'' (Which stands for "Beginner Model Kit") Optimus Prime is a larger version of the ''AMK Mini'', with the design being based on the ''AMK/Pro'' release. As with other ''BMK''s, Optimus features similarly basic articulation, consisting of a ball-jointed head, ball-jointed shoulders, single-axis 90-degree elbows, a rotating waist and lower legs, and slightly swiveling ankles...that's it.

:The kit has an unfortunate packaging quality control issue: the thin head antennas are likely to be bent or even broken off in most packages.
{{-}}

==Blokees==
===Galaxy Version===
{{anchor|Galaxy Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus.jpg|thumb|upright=1.66|Blokees kits are ''truly'' the right of all Sentient Beings.]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot/Decepticon insignias

:Released in the first wave of ''Galaxy Version'' line of blind boxes, [[Blokees]] Optimus Prime is a roughly 4-inch tall, highly-articulated, and non-transforming snap-on model kit of the Autobot leader. He is built on a "Standard Body" skeleton shared with other Blokees figures in the line, but with different body pieces to make them distinct. As advertised in the box, Prime has a pull rate of 1 in every 12 boxes, or three times across four cases.

:Prime comes with a pair of closed and open hands, along with a left hand molded in a pointing position exclusive to this figure. He also comes with his trademark Ion Blaster and Energon axe weapons—the former can be plugged into the closed hands, and the latter can be plugged into either wrist. The barrel of the Ion Blaster is compatible with the blast effects included with Ironhide, Megatron, and Skywarp. He also has a figure stand with either four studs (China release/Chinese logo) or two studs (Global release/English logo) on top, which he can plug into and connect to similar stands. Optimus can also accommodate the jetpack included with Sideswipe, which was released as part of the ''Shining Version'' lineup.

:If one chooses, Prime's inner shoulder parts and elbow joints can be swapped with the red-colored pieces from the same lineup to create a more cartoon-accurate coloration.

:His body parts are redecoed to make ''Galaxy Version'' [[Optimus Prime (SG)#Blokees|Shattered Glass Optimus Prime (IDW)]], [[Ultra Magnus (G1)/merchandise#Blokees|Ultra Magnus (DW)]], and [[Nemesis Prime (G1)#Blokees|Nemesis Prime]].

{{-}}{{anchor|BlokeesMetallic}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot and Decepticon insignias

:The chase figure of ''Galaxy Version'' 01, with a much slimmer pull rate of 1 in every 36 boxes, i.e. once in four cases. Prime is redecoed in a metallic sheen, save for the joint pieces along with more show-accurate deco on the crotch, thighs, back, and shins. He comes with the same accessories as his regular counterpart.

{{-}}
{{anchor|BlokeesPink}}
[[File:Blokees Cybertron Con 2024 Pink OP.jpg|thumb|upright=1.4|Not the kind of [[fandom:gundam:Trans-Am_System|Trans Am]] you'd expect Optimus Prime to turn into.]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Pink)''' (Galaxy Version, 2024)}}</ul>
:*''Accessories:'' Pair of open hands, one pointing left hand, Energon Axe, Ion Blaster, Matrix of Leadership with support stand

:Released exclusively for the Cybertron Con 2024 event, this Optimus Prime kit is sold as a pre-assembled redeco of the first Galaxy/Shining Version kit, featuring opaque and translucent <s>[[energon]]</s> pink livery, and omits the light-up feature. He comes with all weapons and hand accessories from the original Galaxy Version release and the Matrix/support stand from the Shining Version.

:This Optimus Prime is limited to 999 units, with 400...no, 100<ref>{{citesocial|quote=Dear Fans, We sincerely regret to inform you that the on-site sales of the exclusive item - Optimus Prime (Pink) at the 2024 Transformers Cybertron Con have been temporarily canceled. We apologize for any inconvenience this may cause! As of today (December 6), we have sold 100 units, 300 remaining units would be sold through other sales channels, please stay tuned for our further announcements. Thank you for your understanding and support!|link=https://twitter.com/BlokeesOfficial/status/1864925074991780214|name=BLOKEES.OFFICIAL|site=Site Formerly Known as Twitter|year=2024|month=12|day=06}}</ref> sold at the convention, and the rest distributed through online and physical stores across mainland China.

{{-}}{{anchor|GVParallelUniverse}}
[[File:Blokees-TF-Galaxy-Version-06-IDW-Optimus-Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The sixth wave of the ''Galaxy Version'' blind boxes features an Optimus Prime based on his design and coloration from the IDW story [[The Transformers: Stormbringer|''Stormbringer'']]. In addition to the new hand runner introduced in the 4th wave, Optimus comes with his twin cannons and blaster accessory, complete with its blast effect. Like the other ''Galaxy Version'' kits since Wave 5, Optimus features a slightly upgraded suite of standard body parts, notably the sturdier pre-assembled hinge joints and the multi-colored head piece with color-coded eyes.

:As advertised in the box, he has a pull rate of 1 in every 12 boxes.

{{-}}
[[File:Blokees-TF-GV-06-Hidden-Orion-Pax.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The chase figure of ''Galaxy Version'' 06, with 1:36 odds, this Optimus Prime (now called "Orion Pax") kit is a redeco of the kit above, representing the force field-equipped coloration activated by Trailbreaker in "[[Elegant Chaos Part 1: All Our Parlous Yesterdays]]".

{{-}}{{anchor|BlokeesIDWTrans}}
<ul class="iconlist">{{Bp-a1|'''IDW-Optimus Prime (Transparent Edition)''' (2025)}}</ul>
:*''Accessories:'' Pair of open hands, pair of wrist blasters, Ion Blaster

:A translucent redeco of ''GV 06'' Optimus Prime with an iridescent finish, coming pre-assembled in blister packaging. This figure had a run of 999 units, with the first 61 distributed at an event in Chengdu Station, China on June 1, 2025.

{{-}}{{anchor|GV08}}
[[File:Blokees-TF-GV08-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster

:The eighth wave of the ''Galaxy Version'' blind boxes features another new mold of Optimus Prime in a Generation 1-inspired look, but with a new set of outward forearm armor, and he only comes with his Ion Blaster. In addition to the ball-jointed waist from the previous entry, Optimus also features updated articulation, including a slide-down hip joint axis, rotating upper thigh joints, and improved double-jointed knee articulation, similar to his wave mates. This Optimus can also accommodate Sideswipe's backpack from the ''Shining Version'' line.

:Because the newly designed knee joints are made to fit the narrow gaps in the thighs and lower legs, they are incompatible with joints from previous releases, including those used for the elbows.

:If one chooses, Optimus' forearm armors can be omitted for greater accuracy.

:Along with the rest of the wavemates, Optimus is first revealed at Blokees' booth at the IBTE 2025 (Indonesia International Baby Products & Toys Expo) event.

{{-}}{{anchor|GV08Hidden}}
[[File:Blokees-TF-GV08-Optimus-Prime-Hidden.jpg|thumb|250px|Thanks for helping me... pull myself together...''I guess.'']]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hidden Style)''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, half-dead chest plate, metal splinter

:The chase figure of ''Galaxy Version'' 08, with the standard chase odds of 1 in every 36 boxes, this kit of Optimus Prime is a redeco of the regular kit above in metallic paint and molded plastic, featuring a "half-alive, half-dead" appearance. In addition to his identical accessories, Prime features an alternate front chest block with a gash that is compatible with the included metal splinter (referred to as an "Energon Axe"...okay.).

{{-}}
<ul class="iconlist">{{Bp-a1|'''Metroplex''' (Galaxy Version, 2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''

:The ''Galaxy Version'' Metroplex kit comes with a non-poseable figurine (and obviously out of scale) of Optimus Prime, and he can be pegged onto one of his open-palm hands. As he was molded from merely dark gray plastic, he can be painted in full color (or onto any of the other characters that share his appearance) if you wish.

{{-}}

===Shining Version===
{{Anchor|Shining Version}}
[[File:Blokees-TF-Shining-Version-01-Shining-Roll-Out-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 01 - Shining Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (weapon-holding, splayed), ion blaster, Energon Axe, Matrix of Leadership with support stand, holdable Autobot and Decepticon insignias

:Released in the first wave of Blokees' ''Shining Version'' line, this version of the ''Galaxy Version'' Optimus kit now features painted translucent face and chest parts, and a torso frame that lights up upon shaking (or at least just lightly tap some areas on the torso), causing the eyes and the Matrix pattern tampographed on his chest window to glow for a limited time. In addition to his identical accessories from the Galaxy Version release, Optimus also comes with a single Energon Cube, a separate Matrix with a support stand, and a new, larger figure stand.

:The Matrix features a pair of tabs on each handle, compatible with most ''Galaxy/Shining Version'' kits that include open-palm hands, not just Prime.
{{-}}{{anchor|BlokeesG1Toy}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:The second wave of the ''Shining Version'' series introduced a second Optimus Prime mold styled after his [[Optimus Prime (G1)/toys#The Transformers|original Generation 1 toy]], complete with an ion blaster modeled after it. As with the first ''Galaxy Version'' kit, this Optimus can accommodate Sideswipe's backpack from the ''Shining Version'' line.

{{-}}{{anchor|BlokeesG1ToyMetallic}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (Shining Version, 2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:This chase variant of the above toy-style mold is, like the ''Galaxy Version'', redecoed into metallic colors along with more toy-accurate tampographs and retains the same accessories. The eye and window pieces are now molded with orange-ish red translucent plastic instead of blue.

{{-}}{{anchor|ShiningPax}}
[[File:Blokees-TF-Shining-Version-03-Orion-Pax.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' ([[2025]])}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' 2 pairs of hands (fists/accessory-holding, splayed open-palm), Gun, figure stand

:The third wave of the ''Shining Version'' series introduced a new mold styled after his Orion Pax appearance in ''IDW Publishing'''s "Spotlight Orion Pax" comic. As with later Galaxy Version kits since Wave 5, Orion features sturdier pre-assembled hinge joints.

:Since Orion's chin is slightly too long, fully inserting the ball joint may cause his head to ''slightly'' look upwards. To prevent this, insert the ball joint into Orion's head socket first, and then attach it to the torso frame's peg hole until you feel the friction between the joint and the hole without fully inserting it.

:If you're a speed builder, be mindful when attaching the pre-assembled joints; Unlike the symmetrical joints from earlier waves, the pegs on both ends of these joints are designed to connect to specific pieces; The tabs with slightly smaller holes are intended for the upper arms and thighs, while the regular tabs are meant for the forearms and lower legs. While an incorrect knee joint assembly may cause it to very slightly lean when standing straight or in an A-stance, an incorrect elbow assembly won't be noticeably affected unless you're looking very closely.

{{-}}

===Box Sets===
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Exclusive-Yearly-Version).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon''' (2024)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, Energon Axe, Matrix of Leadership with support stand, figure stand, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:This special edition box set included [[Electrum]]-inspired gold redecoes of ''Shining Version'' (See above) Optimus Prime as well as [[Prowl (G1)/toys#Exclusive Yearly Version|Prowl]], [[Ironhide (G1)/toys#Exclusive Yearly Version|Ironhide]], [[Long Haul (G1)/toys#Exclusive Yearly Version|Long Haul]], and [[Starscream (G1)/merchandise#Exclusive Yearly Version|Starscream]], where they also receive translucent redecoes of face and chest parts painted on.

:As with the rest of his pack-in mates in this set, Optimus suffers from a case of [[Gold Plastic Syndrome]], as his molded gold hinge joints can potentially snap off due to the swirly plastic.

{{-}}
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Yearly-Version-Set-2-Optimus-Prime-(G1-Toy).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon - Defence''' (2025)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, figure stand, blast effect, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:The 2025 Yearly Version box set now features an Electrum-inspired redeco of the toy-based ''Shining Version'' Optimus Prime kit. In addition to the identical accessories, he also comes with two additional impact effects for the figure stand.

:Like the rest of this box set's kits, Optimus' hinge joints are now molded in a more mustard yellow-ish plastic, reducing the Gold Plastic Syndrome-related issue plagued from the previous release.

{{-}}

===Action Edition===
[[File:Blokees-TF-Action-Edition-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Action Edition, 2024)}}</ul>
:*Accessories: Ion Blaster, Energon-Axe, Jetpack, Wrist Communicator, Holomatter avatar, Matrix of Leadership, Index finger parts (Fist, Pointing, Trigger-finger), display stand with magnet-powered faction symbol block

:The "Action Edition" Optimus Prime is a 7-inch (approx 18cm) model kit with a slightly more complex build and features an inner frame (equivalent to the ones used for ''Bandai'''s "Master/Perfect/Real Grade" kits) with greater articulation points than his other ''Galaxy Version'' toys. In addition to his two signature weapons, the removable Matrix of Leadership, and the jetpack, Optimus also comes with a hologram readout and wrist comm pieces to attach to the left forearm, with each of those parts featuring two different types of stickers. The articulated hands also feature two additional index fingers, a straight pointing piece, and a slightly curved piece for the Ion Blaster's trigger. A magnetic component in his display stand's faction symbol activates the light-up features that illuminate his eyes and the Matrix. An additional sticker sheet and extra yellow-colored eye parts can be used to create a toy-accurate version of this kit.

:If one chooses, the middle-to-pinky fingers ''can'' be (carefully) sliced into individual pieces as they also feature individual ball joints for each finger.

{{-}}

===Defender Version===
{{Note|Every case before the 5th wave comes with a random Commemorative Card, with 10 Common, 1 Gold, and 1 Silver for each out of every 12 cards.}}
{{anchor|DefenderTruck}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-truck.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Vehicle''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''

:Released as part of the first ''Defender Version'' line of blind boxes, this ''Blokees'' kit of Optimus Prime is molded in his truck mode. The trailer hitch also comes with the Auto-Launcher from the Combat Deck, where it can be extended and wielded by other figures from the same line, allowing them to ride Optimus like an adorable little scooter. The Auto-Launcher can be detached from the bar, allowing the figure to be displayed as a regular-looking truck.

:The Combat Deck/Trailer and the Roller from the 5th wave can accommodate this kit, with the Auto-Launcher able to be mounted inside the trailer.

:This mold was also used to make [[Optimus_Prime_(SG)#SGDefenderVehicle|his Shattered Glass counterpart]].

{{-}}{{anchor|DefenderRobot}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-robot.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:This ''Defender Version'' kit of Optimus Prime is a 2.2-inch (5.5cm) figure, a few inches smaller than the ''Galaxy Version'' kits, but still articulated. Unlike his ''Galaxy Version'' kit, Optimus only comes with an Ion Blaster.

:Like most of the larger Galaxy Version kits, Optimus features a simple neck joint that is colored to match his optics, allowing it to be see-through from his head's eye holes. This mold was also used to make [[Ultra_Magnus_(G1)/merchandise#Defender_Version|Ultra Magnus]] and [[Optimus_Prime_(SG)#Defender_Version|Prime's Shattered Glass counterpart]].

{{-}}{{Anchor|SpecialGalaxyType}}
[[File:Blokees-TF-Defender-Ver-01-Special-Galaxy-Type-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Special Galaxy Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:One of the four chase figures of the line, the "Special Galaxy Type" Optimus Prime is a metallic redeco of the figure above, and he also features additional details to make him more accurate to the show. One chase variant is guaranteed per case, meaning this Optimus appears in five out of every twelve cases.

{{-}}{{Anchor|SpecialArmorType}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-100%-Firepower.jpg|thumb|250px|All of these armaments and yet he insists on crippling the 'Cons' joints without destroying them.]]
<ul class="iconlist">{{Bp-a1|'''Special Armor Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster, Forearm cannon, Wing pack

:The "Special Armor Type" version of the Optimus Prime kit is an alternate version of the Special Galaxy Type chase figure, decked out in metallic paint, and comes with additional armaments such as the forearm cannon and a wing pack that is based on the one used by his ''Cybertron'' namesake. Unlike the chase variant above, this Optimus has an '''''even''''' slimmer pull rate of '''1''' in every 144 boxes, or once per twelve cases.

{{-}}{{anchor|DV05Brilliant}}
[[File:Blokees-TF-DV05-SG-Brilliant-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Brilliant Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 05 - Traitor to Tyranny'''
:*''Accessories'': Energon Axe

:The fifth wave for the Defender Version kit comes with a translucent redeco of Optimus Prime, whose Ion Blaster is replaced with an Energon Axe. Additionally, he comes with one of the three random plastic commemorative coins (featuring etchings of Jetfire's head, Galvatron's head, and Jetfire's vehicle mode) in every case that contains the kit. Each coin is molded from translucent plastic and features a gradient pattern painted with gold.

:As with other clear-colored Brilliant/Glittering kits, the translucent plastic-molded ball-and-socket joints tend to be somewhat loose even when it's built out of the box, compared to the opaque and metallic kits.

{{-}}
===Blokees Wheels===
{{Note| Due to licensing-related reasons, this blind-box line was not released in the US market.}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''

:This 1/64-scale vehicle kit of Optimus Prime's truck mode is part of the new ''Blokees Wheels'' series of blind-boxed ''Transformers'' products. The design is based on Don Figueroa's interpretation of the character's Cybertronian truck mode, as seen in IDW's 2009 -2011 ongoing series. While everything else is molded in ABS plastic, the primary vehicle shell is made out of painted die-cast. Additionally, Optimus Prime features a universal Chassis Connector, which is used by all vehicle mode kits in the lineup, and the vehicle shell is capable of being opened for the chase kits' driver figures to interact with.

:This Optimus Prime has a pull rate of 1/24.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hologram Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with a slim pull rate of 5/144, the "Hologram Edition" Optimus Prime is a translucent redeco of the kit above. It includes an additional translucent blue driver minifigure, which is also designed to fit in the other vehicle kits.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Titanium Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with the slimmest pull rate of 1/144, the "Titanium Edition" Optimus Prime is a metallic redeco of the original kit, and he comes with the same driver figure from the Hologram Edition release of the kit.

{{--}}

==Combot==
[[File:Unix-Square-Combot-Optimus-Prime.jpg|thumb|300px|Autobots, Transf-I mean, Partsform and roll out!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories:'' 5 pairs of hands, Ion Blaster, Energon Axe, Energon Sword/Blaster Bayonet, Vehicle mode frame

:Produced by [[Unix Square]], a toy company based in Hong Kong, [[Combot]] Optimus Prime is an action figure approximately the size of a Voyager Class figure, and he features an impressive 50 points of articulation and includes a hefty amount of die-cast metal for a weighty premium feel, and light-up features for both the eyes and the Matrix of Leadership. In addition to his iconic Ion Blaster, Optimus also comes with a handheld Energon Axe and a live-action movie-inspired Energon Sword. The sword can also combine with the Ion Blaster to create a Bayonet.

:As the LED unit is wired on the neck, Optimus's head cannot swivel in a full 360 degrees.

:Unlike most non-Hasbro/Takara merchandise of the character on this page, Combot Optimus Prime can transform—albeit loosely defined due to licensing restrictions—into a stylized cab-over using full partsforming, while requiring the included vehicle mode frame.

{{-}}

==Auldey==
{{Note|All releases come with their respective trading cards.}}
[[File:Auldey-TF-AAE-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-001'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Optimus Prime is a 5-inch non-transforming but highly articulated action figure, and he comes with his additional pairs of hands and his signature ion blaster. Prime also features a removable chest window piece, which reveals an empty cavity for a future Matrix of Leadership accessory.

:As advertised in the box, the lineup had an 11/70 probability of getting Prime. This mold was also used to make [[Nemesis Prime (G1)#Auldey|Nemesis Prime]].

{{-}}{{anchor|auldeymetallic}}
[[File:Auldey-TF-AAE-Optimus-Prime-(Metallic).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Metallic Color)''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-000'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:The chase figure of the first lineup with a much slimmer 1/72 probability, this Optimus Prime is a redeco and retool of the figure above, featuring a toy-based deco and parts such as the head and legs. In addition, Prime also comes with a sheet of customer-applied stickers to complete the rest of his toy-accurate details, which include the chrome yellow-gold areas on his front hip.

{{-}}{{anchor|auldeyoptimal}}
[[File:Auldey-TF-AAE-Select-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Optimal Set''' (Alpha Action Elite Select, 2025)}}</ul>
:*''ID Number'': '''AAE-S 001'''
:*''Accessories:'' 16 pairs of hands, Ion Blaster, Energon Axe, Matrix of Leadership, Jet pack (with Blast effects), 2 pairs of alternate communication panels, display stand
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of Auldey's non-blindboxed "''Alpha Action Elite Select (AAE-S)''", a subline that also features re-releases of previous figures with more accessories and premium details, ''AAE-S'' Optimus Prime is a redeco and retool of the original AAE blindboxed figure. Deco-wise, Optimus features metallic paint on the red and blue plastic, along with some metallic silver details. He also comes with additional accessories, such as the Energon Axe, Megatron's pistol form, a jetpack with two Blast effects (also compatible with the Ion Blaster), an additional pair of interchangeable communication panels, and four extra pairs of hands that need trimming from their runners. Additionally, Optimus includes retooled areas and newly molded parts, such as a new neck joint that allows him to look up further, an opening chest window that grants access to his Matrix Chamber, and a display stand with an adjustable posing arm that plugs into multiple holes on his back and the soles of his feet for midair action poses.

:Optimus is also compatible with the Seeker-based back and the head from the same entry's Starscream, recreating the latter's disguise in [[Megatron's Master Plan, Part 1]].

{{--}}

==Ty==
* '''Beanie Bouncer Optimus Prime ''' (2025)
[[File:Bouncer-op.jpg|thumb|200px|If we want to get technical, this is actually [[Diac]].]]

:A bouncing ball covered in fur produced by Ty, creator of the more famous Beanie Babies and Beanie Boos. Optimus Prime's head crests are represented by additoinal pieces of felt material coming out of the ball. Opposite the face is an autobot symbol.

:Opitmus Prime is also available in a three set alongside Megatron and Bumblebee.

{{--}}

==Spin Master==
* '''4D Build Innovation Series Optimus Prime''' (2025)
[[File:Op-spin-master-4d.jpg|thumb|200px]]

:A puzzle made of cardboard, with LED Lights, from the 4d Build Innovation Series. Optimus is depicted holding his ion blaster and staring off into the distance. It was initially spotted in [[Costco]] stores in Fall of 2025.

:There are two releases; one, released online at 321 pieces, contains just Optimus's robot mode. Another, available at [[Costco]] stores, contains an additiona 99 pieces, used to build its truck mode.

{{-}}

* '''Puzzle Builders Optimus Prime''' (2025)
[[File:Op-spin-master-youth-puzzle.jpg|thumb|200px]]
:A puzzle made for younger fans, made of plastic. This uses the [[evergreen]] Optimus Prime design, with red and white [[Authentics]] style packaging.

{{--}}

==References==
{{reflist}}
{{-}}
[[Category:Attacktix]]
[[Category:Combiners]]
[[Category:Decoys]]
[[Category:Generation 1 Autobots]]
[[Category:MyClone]]
[[Category:Robot Heroes]]
[[Category:Titanium Series]]
[[Category:Bitfig]]
[[Category:ULTIMATES!]]
[[Category:Transformers Character Card Autobots]]

File:Op-spin-master-youth-puzzle.jpg

2025-10-30T01:02:43Z

Leia G: Youth 3d puzzle Optimus Prime from the Spin Master website.

Youth 3d puzzle Optimus Prime from the Spin Master website.

Optimus Prime (G1)/merchandise

2025-10-30T00:48:55Z

Leia G: clarification with new info regarding both releases.

{{suite}}

'''Optimus Prime''' is a bit of a shill.
==Stamp Bot==
[[File:OptimusPrime-StampBot-1984.JPG|thumb|Truck stamp is cool!]]
*'''Optimus Prime''' (1984)
:Made by [[HG Toys]], Stamp Bot Optimus Prime is a small, non-poseable figurine of Optimus Prime based on his toy with a rubber stamp on the base, and a cap with a felt "floor" that was soaked in ink. The stamp made an image of Optimus Prime's cab mode.
{{-}}

==The Transformers Cookie Jar==
*'''The Transformers Cookie Jar''' (1984?)
:A ceramic cookie jar in the likeness of Optimus Prime's head. The top of Prime's head lifts off for the storage of delicious baked goods or Energon or what-have-you. The cookie jar was manufactured by [[Great American Housewares]] under license from [[Hasbro]].
::*''[http://www.tfw2005.com/boards/transformers-toy-discussion/179468-optimus-prime-cookie-jar-price-check.html Images of The Transformers Cookie Jar at TFW2005]''
{{-}}

==Collegeville Costumes==
{{anchor|CollegevilleG1}}
*'''Optimus Prime''' (1984)
:Although [[Collegeville Costumes]] only released a small number of Transformers [[Halloween]] costumes, and made some odd choices for characters to depict in the process, Optimus Prime was an obvious choice as one of their first releases. The costume consists of a thin plastic facemask based directly on the Optimus toy's head complete with yellow eyes, and an orange and yellow plastic smock decorated not with the details of Optimus' body, but with his package art and the Transformers logo.

*'''Optimus Prime''' (1993)
{{anchor|CollegevilleG2}}
:Optimus Prime recieved a second costume from Collegeville for their line of ''[[Transformers: Generation 2 (franchise)|Transformers: Generation 2]]'' line. As with the 1984 Collegeville costume, it consists of a thin plastic mask held on by elastic. Unlike the previous costume, the plastic smock is now decorated with the details of Optimus' G2 body, as well as having his name and the G2 logo on it.
{{-}}

==Vehicle Play Tent==
[[File:Vehicleplaytent.jpg|thumb|Both a big truck ''and'' a series of tubes.]]
*'''ERO''' (1984?)
:The Vehicle Play Tent was part of the deluge of Transformers merchandise in the 80s. The tent was constructed by means of a series of plastic tubes that fit into sockets on corner pieces (similar to the "k'nex" building system that arrived a few years later), then a vinyl cover was slipped over this PVC skeleton to make the tent.
{{-}}

==Oral Care Station==
*'''Optimus Prime Oral Care Station''' (1984/85?)
:An electric toothbrush in the likeness of Optimus Prime. A battery-operated feature causes the toothbrush (attached at Prime's left wrist) to move back and forth. The set also included a cup for [[water]], an extra brush head, and a stand to hold the various accoutrements.
::*''[https://www.flickr.com/photos/14985789@N07/3207711517/?rb=1 Image at Flickr.com]
::*''[http://fredsworkshop.com/oral.html Images of the Oral Care Station in-box at FredsWorkshop.com]''
{{-}}

==Transformers Milk Caramel==
[[File:Tfcaramel optimus prime.jpg|thumb|upright=1.66|Note: Do not eat! ... the candy. The toys taste better.]]
*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A small soft-rubber figurine (known as a ''keshigomu'' in Japan) of Optimus Prime was released as part of [[Kabaya]]'s line of ''[[Transformers Milk Caramel]]'' [[candy toy]]s. Like all the figures from the 1985 range, Prime came blindpacked, and was available in a variety of colors including white, blue, yellow, green and orange. As the name of the series suggests, he came with a piece of caramel candy.

*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A second Optimus Prime ''keshigomu'' was included in the second wave of ''Milk Caramel'' figures, sporting some broader proportions and more toy-based design cues like visible wheels, holding its gun in its left hand, rather than its right. This figure was available in red, yellow and blue variations; a baffling variant is known to exist with a ''Decepticon'' symbol on its left shoulder!

*'''Convoy''' (1985)
**''ID number:'' '''2'''
:The second ''Milk Caramel'' wave also contained a third Optimus Prime figure, largely identical to the second, except with its gun in its right hand, and holding its left arm aloft. Again, this figure was available in red, yellow and blue variations.
{{-}}

==Transformers Choco==
[[File:Tfchoco optimusprime.jpg|thumb]]
*'''Convoy''' (1985)
:A small solid-color snap-together model kit of Optimus Prime was released by Kabaya as part of their ''[[Transformers Choco]]'' line, coming packaged with small chocolate candies similar to [[M&M's]] called "Chocolate Dots". The kit can transform from robot to vehicle mode, though this version of Prime doesn't have any hands.

*'''Convoy''' (1985)
**''Accessories:'' Two fists
:A second ''Choco'' version of Prime was upsized from the first a little, and was given a pair of removable fists, the right one clutching Prime's [[ion blaster]].
{{-}}

==Transformers Gum==
[[File:Tfgum optimusprime.jpg|thumb|upright=1.66]]
*'''Convoy''' (1985, 1997)
**''Accessories:'' Two fists, ion blaster
:In addition to the small ''Choco'' model kit, Kabaya also released a larger version of Prime under their ''[[Transformers Gum]]'' line. Essentially a downsized version of the original Prime toy (sans trailer), the kit is sculpted from black, red, and grey plastic, features stickers rather than paint applications for details, and came with a stick of gum.

:This kit was reissued in 1997 by might-or-might-not-be official Transformers licensee [[ToonTown]] in [[South Korea]] (possibly, in a 2-pack with a reissue of ''Transformers Gum'' [[Soundwave (G1)/merchandise#Transformers Gum|Soundwave]] <ref>[http://fuwakudou.web.fc2.com/prisoners06.html One source] mentions obtaining two boxes of the ToonTown ''Transformers Gum'' releases with each containing two kits - the one numbered #1 featuring Optimus Prime and Soundwave and the one numbered #2 featuring Sideswipe and Starscream - but considering that none of the other (albeit admittedly very few) sources that discuss these kits mention a similar arrangement, it is possible that this was either a packing mistake or simply already-opened boxes being sold on the secondary market with two loose kits stuffed into them (the article does not specify whether or not the boxes they obtained were sealed, although they do look new-ish in the provided pictures). Still, considering how very little information exists regarding these releases in general, it will nonetheless be noted here that these kits ''might'' have been released as 2-packs at some point.</ref>), looking mostly identical save for a set of cheaper-looking paper decals.
{{-}}

[[File:Tfgum2010 g1prime.jpg|thumb|upright=1.66|My limbs need to be horribly mutilated and rearranged to change forms!]]
*'''Convoy''' (2010)
**''Accessories:'' Ion blaster
:The first wave of 2010's revival of the ''Transformers Gum'' series served up a double dose of Prime, beginning with this new model kit of the original Generation 1 version of the character. Sculpted from white, red, and blue plastic, the kit features a positively ''ungodly'' amount of stickers to make it look presentable and comes with Prime's traditional ion blaster weapon, which stores on the rear of his cab in vehicle mode.

:In terms of transformation, Convoy partially [[partformer|partforms]], as the forearms are needed to be removed and attach it back during conversion.
{{-}}

[[File:Tfgum2010 henkei prime.jpg|thumb|upright=1.66|So do mine!]]
*'''Convoy''' (2010)
**''Accessories:'' Smokestacks/laser cannon
{{toydesigner|[[Naoto Tsushima]] (packaging artist)}}

:The second Prime figure in the 2010 ''Gum'' line was this kit of his ''[[Transformers: Classics|Classics]]''/''[[Henkei! Henkei! Transformers (franchise)|Henkei! Henkei!]]'' body. As with the Generation 1 model, this figure is made from white, red and blue plastic and uses ''lots'' of stickers. It comes with the ''Classics''' figure's transforming smokestack/laser cannon weapon.

:Much like his aforementioned G1 self, his arms also need to be partformed into robot mode.
{{-}}

[[File:Tfgum2014_g1starconvoy.jpg|thumb|upright=1.66|But not mine!]]
*'''Star Convoy''' (2014)
**''Accessories:'' Cannon, Roller/ treads, car mode Hot Rodimus

:Released as part of the 8th wave of Kabaya's 2009 series of standard model kits, Star Convoy is a snap-together model kit that can transform into a futuristic big rig. Like the full-sized Star Convoy toy, this model kit can assume a battle station mode and also includes a diminutive and non-transformable Hot Rodimus in car mode that can interact with the base mode ramps. Like most other Kabaya model kits, Star Convoy has no paint applications and relies on stickers for added details.

:Owing to the original toy's simple engineering, Star Convoy does not require any disassembly to transform into robot mode, making him one of the few non-partforming Kabaya figures. He does, however, need to have his Microcarrier wheel base detached (which was also an option on the original toy) to fully access a significant improvement over his older self: some newly-added leg articulation! The Microcarrier also doubles as a shield that can be attached to the robot's left arm.
{{-}}

==Hero Set==
*'''Convoy''' (1985)
**''ID number:'' '''01'''
**''Accessories:'' Laser rifle
:A large ''keshigomu'' of Optimus Prime was produced by TakaraTomy licensee [[Maruka Toys]]. Packaged on a blister card, the static, unposeable Prime figure came with a removable laser rifle, and featured a few small stickers for colour and detail. Maruka also produced a Megatron figure in the same scale, and both Prime and he were available in red, yellow or green.
{{-}}

==Decoy==
[[File:Decoy optimus prime.jpg|thumb]]
*'''Cybertron Hero Collection 22''' (multi-pack, 1986)
*'''Defeat Trypticon Strategy Game''' (board game, 1986)
:Optimus Prime was among the many characters rendered by [[TakaraTomy|Takara]] as part of their series of 1.5" ''keshigomu'' figurines. Like all the Autobots in the series, Prime was molded in soft red rubber, and featured a number sculpted into his back that was the sum total of his [[Tech Spec]]s, for use in the various games that could be played with the figurines. Prime was available as part of a 22-piece box set of Autobot figures, as a playing piece in the Defeat Trypticon Strategy Game, and later, in a peach coloration randomly packed as part of various other box sets.

*'''Optimus Prime''' (1987)
**''Checklist number:'' '''31'''
:The Prime figurine was later brought over to [[Hasbro]] markets as part of the "[[Decoy (G1)|Decoy]]" promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (31, in Prime's case). Like all Autobot Decoys, he was a randomly-chosen pack-in available with the carded [[Throttlebot]]s, [[Aerialbot (G1)|Aerialbots]], [[Protectobot (G1)|Protectobots]] and [[Technobot (G1)|Technobots]].

::*''[http://www.tfu.info/1986/Autobot/Decoys/OptimusPrime/optimusprime.htm More information on Decoy Optimus Prime at TFU.info]''
{{-}}

==Knitting Pattern==
[[File:Transformers-knitting-pattern.JPG|thumb|Here to transform your sweater into something that will get your ass kicked.]]
*'''Wendy DK 3015''' (1986)
: Produced by U.K. company [[Wendy DK]] and designed by [[Joy Gammon]], this pamphlet contained patterns for two ''Transformers''-themed sweaters, one featuring Optimus Prime in robot mode, one featuring Optimus Prime in vehicle mode. The patterns were sized as Children's Large, so you're going to have to upscale it quite a bit if you want your <s>girlfriend</s> mom to knit you one.
{{-}}

==Vinyl figurine==
[[File:Optimus Prime Vinyl Figure set.jpg|thumb|upright=1.66|Vinyl Prime leads his decoys into battle [[Action Master|before the great storm]].]]
*'''Scramble Gun Set''' (1986)
**''Japanese ID number:'' '''Part.1'''
:Optimus Prime was one of several characters released by [[Seven]] and Takara as large vinyl figurines in a variety of different novelty sets. Prime came packaged with a roleplay pistol (the titular "Scramble Gun"), an Autobot badge, and four randomly assigned peach-colored decoy figures. In [[Ultra Magnus (G1)/merchandise#Vinyl figurine|"Part.2"]] of the set Prime is replaced by a vinyl Ultra Magnus.{{-}}

==Gold Convoy Trophy==
[[File:Gold Convoy Trophy.jpg|thumb|Thou will worship this golden convoy. Or Perish!]]
*'''Optimus Prime''' (trophy, 1988)
:A gold chrome trophy in the likeness of Optimus Prime was given as an award to an unknown number of distinguished [[TakaraTomy|Takara]] employees and as a [[Lucky Draw figure|Lucky Draw]] (alongside the [[Chromedome (G1)|Silver Chromedome Trophy]]) in [[TV Magazine]] in 1988. The two different releases have different plaques but appear to be otherwise identical. If you're an Optimus Prime merchandise completist, good bloody luck finding this one.
{{-}}

==''Generation 2''==
*'''Optimus Prime''' (Dairy Queen promotion, 1994)
[[File:DairyQueen Optimus.jpg|thumb|Rare, in a raw chicken sort of way.]]
:Released in Dairy Queen's 'Kid's Pick-Nic!' meals in 1994, this hunk of red and blue plastic is the first known Optimus Prime kids' meal toy and also probably the worst, sporting no transformation and zero articulation of any sort, with an included sticker sheet for detailing that doesn't particularly resemble any iteration of the character.

:These can be pretty hard to find, owing to their limited distribution compared to the average fast food promotion. Being pretty forgettable as toys probably didn't help either, if we're being honest.
{{-}}

*'''Optimus Prime Inflatable Bop Bag'''
[[File:OptimusPrime_G2_Inflatable_Bop_Bag.jpg|thumb|At last, merchandise for Decepticons!]]
:Released in 1993 by Kid Dimension, a subsidiary of Hasbro,<ref>[http://www.fundinguniverse.com/company-histories/hasbro-inc-history/]</ref> this 3 foot tall Inflatable Bop Bag featured the likeness of Optimus Prime above the Transformers Generation 2 logo. Supposedly to encourage kids to punch out Optimus Prime?
{{-}}

===ToonTown===
{{note|There's a longstanding debate on whether the obscure Korean-exclusive [[ToonTown]] figures and merchandise, allegedly released under official Hasbro licensing according to their packaging, are actually legitimate Transformers products or just bootlegs with fraudulent copyright information. Although there isn't a clear consensus from collectors and no statement from Hasbro on this matter as of {{CURRENTYEAR}}, we have nonetheless chosen to cover them here for the sake of archival and posterity.}}

[[File:Midam-Prime.jpg|thumb|upright=1.66|Maybe a licensed product, maybe a bootleg. Maybe it's in our definition of "toy," maybe it's "merchandise." ToonTown needs a {{w|Eddie Valiant|detective}}!]]
{{anchor|MidamIndustry}}
<ul class="iconlist">{{Bp-a2|'''Optimus Prime''' (Model kit, 1997)}}</ul>
:*''Accessories'': Blaster, left & right fists
: Notoriously odd [[South Korea]]n company ToonTown licensed the ''Transformers'' brand to model kit manufacturer [[ToonTown#Items released by Midam Industry|Midam Industry]], which in turn put out this surprisingly detailed and robust kit of the original Generation 1 Optimus Prime figure. It is fully transformable and about 3/4ths the size of the original toy. He does not feature his trailer, and his weapon design is substantially different from either of his classic blasters.

: Three color morphs have been found so far: original red arms and torso with blue head and legs, a mirrored version with red head and legs and a blue torso and arms, and one with all the aforementioned parts in blue.<ref>Reviews for a [https://m.blog.naver.com/eoiipp/130144214329 "standard"-colored Midam Optimus kit], an [https://blog.naver.com/parang16/20041871808 "inverted"-colored Midam Optimus kit], and an [https://blog.naver.com/nckim/70101680088 all-blue-colored Midam Optimus kit] on blog.naver.com</ref> This suggests that the colors which make up the two batch of parts might be randomized between blue and red, and as such; an as-of-now undocumented all-red version might also exist. All of his versions also have their chrome parts painted in metallic gold, a common oddity across ToonTown Primes as seen in the previous LALA figure.

: The figure comes with a batch of rather weird stickers, with text on his license plate and the sides of his truck mode that refers to him as "[[gbwiki:Dump Robo|Dump Robo]]".
{{-}}

[[File:LALA-PrimePencilCase.jpg|upright=1.66|thumb|Pope Leo XIV might have been selected on the
day that this image was uploaded, but pencil case Optimus might be the holiest thing that I've seen all day, hahaha... I'm going to hell, aren't I?]]
*'''LALA Pencil Case''' (1997)
:Possibly one of the most majestically quirky pieces of merchandise to have graced any Transformers character ever, this incredible pencil case from ToonTown licensee [[ToonTown#Items released by LALA|LALA]] is generally based around the design and transformation of the original Generation 1 Optimus Prime toy, but with ''a lot'' more than meets the eye to it: on top of being fully transformable from his robot mode to (an albeit rather flat) truck mode, he folds open to reveal space for the storage of several pencils and/or pens of your choosing, as well as including printed stickers for a time table and an address book, a drawer for the storage of extra school supplies, and a hidden thermometer that's revealed by lowering his head!

:Pencils can be attached to his shoulders to imitate his smokestacks, and his fists, which are removable for the transformation like in the original toy? They're erasers! Gah, how can an obscure, maybe even potentially fake piece of merchandise from 1990s South Korea have this much soul and creativity put into it! The fists can even be stored below the truck's front portion in vehicle mode, guaranteeing that you never lose them.

:He also includes a sticker sheet and a small 20cm ruler, featuring packaging art of himself plus ''Generation 2'' [[Megatron (G1)|Megatron]], [[Sideswipe (G1)|Sideswipe]], and [[Ramjet (G1)|Ramjet]], as well as pictures of their respective LALA eraser versions (the one for Optimus coming right up).
{{-}}

*'''Eraser''' (1997)
:Another piece of merchandise from ToonTown licensee LALA, this eraser also doubles as a small simple model kit, with his large colored bits being the "eraser" portion and the remainder of the toy being constituted of grey plastic parts that are assembled together. He transforms from robot to vehicle and back by [[Partformer|partforming]] his individual components.

:Although the advertisements and aforementioned ruler (as well as the few copies that we know of) feature his eraser bits in pink, it is possible that he might have also been released in bright green, as other LILA erasers that also show up as pink in promotional images have been found with this color instead.
{{-}}
*'''Watch''' (1997)
:Yet another LALA product, this Optimus Prime watch "transforms" by folding out of its compressed half-form and standing up as a simple fully-fledged little robot. His chest opens to reveal the titular watch. Said chest, along with his head, have an unusual gold chrome deco (a commonality across a handful of ToonTown products), and the box art is painted accordingly to reflect this.
{{-}}

==''Metalforce''==
[[File:MetalforceConvoy.jpg|thumb|I'm expensive! ''(Metallic Version Pictured)'']]
*'''Convoy''' (1999/2000)
**''Japanese ID number:'' '''MFC-01'''
**''Accessories:'' Ion Blaster, Autobot Matrix of Leadership, alternate hand, unpainted rifle, Matrix, helmet and hand

:''Metalforce'' Convoy is a large vinyl figurine produced by [[Time House]] sculpted to very closely resemble Optimus Prime as he appeared in the original television series, and at the time was the most accurate product depiction of Optimus Prime's cartoon appearance.

:The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his [[Matrix of Leadership/toys|Matrix of Leadership]], as is a ''[[The Transformers: The Movie|Movie]]''-style Matrix cover (not pictured). He also comes with an alternate hand that allows him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands, and helmet, which probably meant for those who wanted to duplicate them with resin and/or wish to modify/paint them...you know how garage kit modellers do.

:Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colors of the actual series, and a metallic-paint version (pictured), which is less [[show-accuracy|show-accurate]] but more shiny. The plain-colors version was the first release and have an Autobot symbol tampograph on his shoulder as per [[The Transformers (cartoon)|the cartoon]], while the later metallic-finish version instead came with a decal sheet.

{{-}}

==''Choro-Q''==
*'''Convoy''' (2000)

:''[[Choro-Q]]'' Convoy is a [[redeco]] of the Domra Truck toy from Takara's ''Choro-Q'' toyline of non-transforming [[super deformed]] vehicles. He was an [[exclusive]] at [[BotCon]] Japan 2000, and features a [[pull-back motor]] and a rear license plate that reads "BotCon Japan 2000".

:Along with ''Choro-Q'' [[Mirage (G1)|Ligier]] and [[Megatron (G1)/toys|Megatron]], Convoy was given out randomly to convention attendees. Each toy was limited to 1000 pieces.

==Super Collection Figure==
[[File:SCF Optimus.jpg|upright=1.66|thumb|#IGotPrimeOnIt]]
*'''Convoy''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

: A three-inch tall [[plastic|PVC]] figurine of Optimus Prime was available as part of the first wave of [[TakaraTomy|Takara]]'s ''[[Heroes of Cybertron (toyline)|Super Collection Figure]]'' line. Like all the figures in the wave, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve [[blindpacking|blindpacked]] figures.

{{-}}{{anchor|SCFaxe}}
[[File:SCF Optimus chase axe.jpg|upright=1.66|thumb]]
*'''Convoy with Ax''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

:Also available in the first ''Super Collection Figure'' wave was a rare "Secret Figure" version of Optimus (斧付きコンボイ, ''ono-tsuki konboi''), decorated in metallic paint and replacing his gun-wielding right hand with his [[energon-axe]].

: It was ''presumably'' released at a ratio of one per every ten cases; while this has not been officially confirmed, later waves gave these odds for Secret Figures.

{{-}}{{anchor|SCFtrailer}}
[[File:SCF Optimus Truck.jpg|upright=1.66|thumb|We're just as confused as you are, folks.]]
*'''Convoy (Trailer Mode)''' (2000)
**''Act'': '''2'''

:Part of the second ''Super Collection Figure'' act, this is the only ''SCF'' figure of a vehicle mode Transformer. As with the previous non-chase Prime figure, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve blindpacked figures.

: Unlike every other figure in the line (excluding build-a-figures), this one does ''not'' come with a figure stand, because... well, what would be the point?

{{-}}{{anchor|SCFMegaGun}}
[[File:SCF Optimus chase jetpack.jpg|upright=1.66|thumb]]
*'''Megatron & Convoy''' (2000)
**''Act'': '''2'''
**''Accessories'': Stand

:The second ''Super Collection Figure'' wave, like the first, also had its own Optimus Prime chase figure, this one wielding Megatron in gun mode and wearing [[Sideswipe (G1)|Sideswipe]]'s [[jet pack|rocket pack]], as seen in the [[The Transformers (cartoon)|original ''The Transformers'' cartoon]] episode "[[More than Meets the Eye, Part 3]]".

: This was presumably also released at a ratio of one per every ten cases.

{{-}}{{anchor|SCFdamage}}
[[File:SCF Optimus chase damage.jpg|upright=1.66|thumb]]
*'''Damaged Convoy''' (2001)
**''Act'': '''3'''
**''Accessories'': Stand

:There was no mass-release Optimus Prime figure for the third ''Super Collection Figure'' act, but there was another rare chase figure, this time a battle-damaged version of the original figure from the first act, referencing his injuries from ''[[The Transformers: The Movie]]''.

: Again, it was ''probably'' released in one out of every ten cases. He replaced the clear version of [[Bumblebee (G1)/merchandise#Super Collection Figure|Bumblebee]] in the case.

{{-}}{{anchor|SCFcom}}
[[File:SCF Optimus Comm.jpg|upright=1.66|thumb|He's actually checking his makeup.]]
*'''Convoy (B)''' (2001)
**''Act'': '''4'''
**''Accessories'': Stand

:For the fourth ''Super Collection Figure'' wave, Prime was rendered weaponless, speaking into the open communication panel on his left arm. Like all the figures in the fourth wave, Prime was available in both standard full color and metallic silver "pewter" versions, one of each of which was available in a standard case of twelve blindpacked figures.

: Care should be taken when moving the joints of the pewter version, as is not uncommon for the connector pegs to have gotten painted as well, resulting in stuck limbs and tearing joints. Shaving the interior of the socket slightly with a hobby knife is usually sufficient to relieve the issue. (This holds true for all other pewter figures on this list, and in fact the entire dang line from here on.)

: In eight out of every ten cases, the pewter version of Prime came packaged with the left arm of the collectible [[Metroplex (G1)#Super Collection Figure|Metroplex]] build-a-figure; these parts were either in full color or clear-plastic, packed at an equal ratio of four out of eight cases.

{{-}}{{anchor|SCFSilverMatrix}}
[[File:SCF Optimus chase silver.jpg|upright=1.66|thumb]]
*'''Convoy''' (2001)
**''Act'': '''5'''
**''Accessories'': Stand

:This version of Prime was a chase figure in the fifth ''Super Collection Figure'' act, and depicts the Autobot leader, rendered in metallic silver, opening the Matrix, referencing the end of "[[The Return of Optimus Prime, Part 2]]". This figure was packed in at a ''confirmed'' ratio of one per every ten cases.

{{-}}{{anchor|SCFMegatrongun}}
[[File:SCF Optimus Act6.jpg|upright=1.66|thumb|Shadow the Convoy, ow the edge.]]
*'''Convoy (C) with Megatron Gun Mode''' (2002)
**''Act'': '''6'''
**''Accessories'': Extra right fist, stand

:The sixth ''Super Collection Figure'' wave featured yet another mass-release version of Optimus. While this Optimus is wielding Megatron (using the same mold as the chase figure from the second Act), he has entirely new-mold arms, plus an interchangeable empty right fist. On top of that he was extensively redecoed: he's actually cast in different shades of light salmon plastic and heavily painted over in an overall darker, less saturated scheme, his normally-white parts now in medium-gray. His pec-windows are painted with a weird shiny dark blue that gives them a translucent look. The figure was available in both full color and pewter versions in an equal ratio.

: In eight out of every ten cases, the pewter version came with the head for the wave's [[Grand Maximus#Super Collection Figure|Grand Maximus]] build-a-figure, packed at a ratio of six color parts to two pewter per case.

{{-}}{{anchor|SCFStarConvoy}}
[[File:SCF Optimus Star Convoy.jpg|upright=1.66|thumb|Chonktimus Prime.]]
*'''Star Convoy''' (2002)
**''Act'': '''8'''
**''Accessories'': Stand

:After taking a break for the seventh wave, Prime returned for the eighth ''Super Collection Figure'' wave, which would prove to be the final Generation 1-themed set of figures. This figure of Prime in his Star Convoy body was available in both full color and pewter versions in an equal ratio.

:In eight out of every ten cases, the colored version came with the right arm for the wave's [[Scorponok (G1)#Super Collection Figure|Scorponok]] build-a-figure; this part could be in either full color or pewter, at a 4:4 ratio.

{{-}}{{anchor|ConvoySet}}
[[File:SCF Optimus Earth Obliteration.jpg|thumb|upright=1.66]]
*'''Special "The Earth Obliteration Plan": Exclusive Convoy Set''' ([[February 3|Feb 3]] 2002)
**''Accessories'': Stand

:Available exclusively at the Wonder Festival convention, this set includes two metallic-paint versions of Convoy figures from Act 2: the "Convoy w/ Megatron Gun" chase figure (minus the jetpack), and the truck-mode "figure".

: The set was limited to only 1000 units.

{{-}}{{anchor|ConfrontationSet}}
[[File:SCF Optimus Confrontation.jpg|thumb|upright=1.66]]
*'''TF Confrontation Set 01: Convoy vs Megatron''' ([[September 20|Sept 20]]-[[September 22|22]], 2002)
**''Accessories:'' Energon-axe

: Exclusive to the Tokyo Game Show 2002, this special set includes a new version of the original first-Act Optimus Prime figure, along with a new version of the first-Act Megatron. Both are cast in transparent plastic and completely painted over in a grimy, battle-damaged look. Both also come with the interchangeable energon-axe and mace weapons from their first-wave chase figures. Completing the theme of the set is the backdrop of the packaging interior, which depicts [[Sherman Dam]].

: Curiously, Optimus features the larger, rounded-off antennae of the [[Hasbro]] ''Heroes of Cybertron'' version of the mold, which was in production/circulation about the same time.

: As with the above Wonder Festival set, this set was also limited to 1000 units.
{{-}}
==Mega Super Collection Figure==
{{anchor|MSCF}}
*'''Convoy TV Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
*'''Convoy Metallic Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
{{-}}

==''Heroes of Cybertron''==
[[File:HOC Optimus.jpg|upright=1.66|thumb|Hey Spike, pull my finger.]]
*'''Optimus Prime''' (2002/2006)

: Part of the first wave of Hasbro's ''[[Heroes of Cybertron (toyline)#Heroes of Cybertron|Heroes of Cybertron]]'' series, Optimus is a [[redeco]] of the standard ''Super Collection Figure'' Optimus mold, with a ''slight'' [[retool]]ing to give him longer, thicker, rounded-off helmet antennae [[for safety reasons]]. Like all the standard ''Heroes'' figures, he is cast in transparent plastic, then painted over, save for the eyes and a small patch on the back of his head, giving him a [[light-piping]] gimmick. There are a few other small deco differences to the ''Heroes'' version, such as his helmet crest changing from white to gray.

: Optimus was re-released in 2006 as part of a short-lived ''Heroes of Cybertron'' revival, celebrating the 2006 DVD release of the original ''[[The Transformers: The Movie]]''. Cast in solid-white plastic rather than translucent blue, this makes him ''very'' similar to the original ''SCF'' toy, but he retained the thicker antennae, plus got some very minor paint changes on the head: his crest-vent went back to white, and oddly his eyes are white too, rather than the ''SCF'' version's chest-window light blue.

::*''[http://www.tfu.info/2002/Autobot/HoCOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime at TFU.info]''

{{-}}{{anchor|HOCApex}}
[[File:HOC Optimus Apex.jpg|upright=1.66|thumb|Don't tell anyone, but this crap is HEAVY!]]
*'''Powermaster Optimus Prime Apex Armor''' (2002)

: An unexpected addition to the line, especially in the first wave next to another Optimus (see above), "Apex Armor" Optimus is a [[redeco]] of [[Ginrai (robot)#Super Collection Figure|God Ginrai]], the double-armored-up form of Optimus's ''[[Fight! Super Robot Lifeform Transformers (franchise)|Super-God Masterforce]]'' lookalike [[Ginrai (robot)|Ginrai]]. There are a few small paint differences between God Ginrai and Apex Armor Prime (beyond the obvious "opaque vs clear-plastic base figure" thing, we mean), most notably that the many parts on God Ginrai that are darker unpainted gray plastic, like the thighs and side-panels/guns on the lower legs, have been painted the same light gray as the chest on Optimus.

: This is the first Hasbro-release depiction of Optimus in this mode, later backed up with the release of the full-fledged toy of [[Optimus Prime (G1)/toys#PMOP|Powermaster Optimus Prime]] with [[Apex Bomber]] the following year.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeApexArmor/optimusprime.htm More information on ''Heroes of Cybertron'' Powermaster Optimus Prime Apex Armor at TFU.info]''

{{-}}{{anchor|HOCaxe}}
[[File:HOC Optimus Axe.jpg|upright=1.66|thumb|Energon Axe: Only used in [[More than Meets the Eye, Part 2|one episode]]. Ever.]]
*'''Optimus Prime''' (2002)

:This second-wave ''Heroes of Cybertron'' release is a variation of the chase figure from the first ''Super Collection Figure'' wave, depicting Prime with his right hand replaced with his energy axe. This figure is a little different from its Japanese progenitor (beyond the "clear-plastic painted over" deal, of course), being painted in normal matte/gloss rather than metallic paint, and replacing the left "pointing" hand with the clenched fist of the later "communicator" version of Optimus. It also retains the ''Heroes'' molding alterations to Optimus's helmet.

: Oddly, he comes with the same collector card as the first version, and the packaging does not call out the energy weapon in any way. The card-back cross-sell even shows only the original Optimus. (The same happened to this wave's energy-weapon-wielding [[Megatron (G1)/merchandise#Heroes of Cybertron|Megatron]].)

::*''[http://www.tfu.info/2002/Autobot/HoCAxeOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Plasma Weapon at TFU.info]''

{{-}}{{anchor|HOCSpark}}
[[File:HOC Optimus Spark Attack.jpg|upright=1.66|thumb|This can't be [[Spark attack|Spark Attack]]! His is so energetic that... he BURNS.]]
*'''Powermaster Optimus Prime Spark Attack''' (2002)

: In a yet another unusual choice for the line, this second-wave figurine is a redeco of the first God Ginrai/Powermaster Prime Apex Armor PVC figure, cast in translucent orange plastic with red gradients and flame detailing, depicting a "spark attack" mode.

: This is a variant of the ''Super Collection Figure'' "God Fire Guts" God Ginrai chase figure, which had been rendered entirely in solid metallic gold paint.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeSparkAttack/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime Spark Attack at TFU.info]''

{{-}}{{anchor|HOCComm}}
[[File:HOC Optimus Comm.jpg|upright=1.66|thumb|You won't believe where I'm calling you from!]]
*''' Optimus Prime with Communicator''' (2003)

:This fifth-wave ''Heroes of Cybertron'' figure is a release of the Prime figure from the fourth ''Super Collection Figure'' wave, depicting a weaponless Prime talking into the communicator in his left arm. He retains the helmet alterations of the previous versions of the figure.

: This toy also came with the head and weapons for the wave's collectible [[Metroplex (G1)#Heroes of Cybertron|Metroplex]] build-a-figure.

::*''[http://www.tfu.info/2003/Autobot/HoCCommunicatorOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Communicator at TFU.info]''

{{-}}

==Hard Hero==
[[File:HardHero OptimusPrime bust.JPG|thumb|upright=0.85]]
*'''Optimus Prime''' (Bust, 2002)

: Optimus Prime was the first ''Transformers'' bust released by [[Hard Hero]]. He is approximately six inches tall at the head (8.5 at the gun) and is made out of cold-cast porcelain. There were also a version of the bust signed by the sculptor, limited to 100 samples.

{{-}}

[[File:HHero OptimusStatue.jpg|thumb|Not there. There!]]
*'''Optimus Prime''' (Full figure statue, 2003)

:Hard Hero also created a 13-inch tall Optimus Prime statue. It is sculpted pointing with his left hand while holding his ion rifle in his right.

{{-}}

==MyClone==
[[File:Prime-Myclone.jpg|upright=1.67|thumb]]
*'''Optimus Prime (2003)'''
**''Japanese ID number:'' '''MFT001''' and '''MFT006'''
**''Accessories:'' Display base
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

: Optimus Prime was released three times in the [[MyClone]] line, all in the first wave of toys. He was released in both robot and truck mode, while a clear Optimus in robot mode was one of two chase figures along with a clear Megatron.
{{-}}

==Generation 1 Figure-Collection==

[[File:Bottlecap prime gun.JPG|thumb]]

*'''Convoy (gun)''' (2003)
**''Japanese ID number:'' '''C-1'''
**''Accessories:'' Display base

:At only one inch in height, this Optimus "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's Transformers [[Generation 1 Figure-Collection]]. The figure was rendered in both a standard "retro" black and white color scheme, and [[:File:Bottlecap chase prime.jpg|a rare full-color]] [[chase figure|chase]] version, and came with a leaflet, personalized with cartoon screen captures.
{{-}}
[[File:Bottlecap prime pointing.JPG|thumb]]
*'''Convoy (pointing)''' (2003)
**''Japanese ID number:'' '''C-2'''
**''Accessories:'' Display base

:The second Prime figure in the Generation 1 collection was much like the first, only sculpted with an empty hand, pointing off into the distance like a lot of Optimus Prime figures are wont to do.
::*''[http://snakas.web.fc2.com/misc_item/kabaya_bottle.htm More information on the Bottlecap Collection at Autobase Aichi]''

{{--}}

==KT Figure Collection==
[[File:Optimus_Prime_KT.jpg|upright=1.66|thumb|Thanks for helping me... [[City of Steel (episode)|pull myself together.]]]]
*'''Convoy''' (KT Figure Collection, 2004)
: This figure was designed by [[Yuki Ohshima]] and produced by [[KT Figure Collection]]. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in ''[[The Transformers: The Movie]]''.

{{-}}{{anchor|KTFCRevival}}
[[File:Optimus_Prime_ex_KT.jpg|upright=1.44|thumb|No, I am [[redeco|NOT]] [[Ultra Magnus (G1)|Ultra Magnus]]! I'm silver, not [[:File:Magnuslongshot.jpg|white]]]]
*'''Convoy "Revival version"''' (''[[Figure Ō]]'' exclusive, 2004)
: The 82nd issue of the hobby magazine ''[[Figure Ō]]'' came with a [[redeco]] version of Optimus Prime's mini bust. It is painted completely silver, making him appear to be coated with the special alloy from "[[The Return of Optimus Prime, Part 2]]".

{{-}}

==Palisades==
[[File:Palisades WarWithinPrime.jpg|thumb]]
*'''The War Within Optimus Prime''' ([[Palisades Toys|Palisades]], 2005)

:'''The War Within'' Optimus Prime is a six-inch-tall polystone mini statue based on his appearance in the popular [[War Within (franchise)|''War Within'' comic book series]]. Prime stands on a silver Autobot-insignia stand, is decorated with dirt to simulate battle damage, and has articulation in his head and arms. The statue was limited to 1500 pieces worldwide.

{{-}}

==''Titanium Series''==
[[File:TitaniumRMWWPrime.jpg|thumb|Descend, Squattimus Prime.]]
*'''War Within Optimus Prime''' (3" Robot Masters, 2006)
**''Accessories:'' Ion Blaster, display stand

: ''War Within'' Optimus Prime is the second toy representation of Optimus Prime as he appears in ''War Within''. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

: He is squat. Very squat.

{{-}}
{{anchor|TitaniumG1}}
[[File:TitaniumRMG1Prime.jpg|thumb|Drop and give me twenty, soldier!]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand

: The first Titanium representation of G1 Optimus Prime has a well-proportioned sculpt based on his 20th Anniversary toy. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

{{-}}
{{anchor|TitaniumG1BattleDamage}}
[[File:TF-Titanium-Series-3-inch-Robot-Masters-Battle-Damaged-Optimus-Prime.jpg|thumb|"Drop dead and give me 20!"]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand
: This is a repaint of the 3" G1 Optimus Prime titanium figurine, with a 'battle-damaged' deco.
{{-}}{{anchor|tit2pack}}
[[File:Titanium-Series-Optimus-Prime-and-Bumblebee-2pack.jpg|thumb|"You! YOU STOLE MY LAST CESIUM SALAMI!"]]
*'''Optimus Prime & Bumblebee''' (2-pack, 2007)
**''Accessories:'' Ion Blaster, display stand
: A Toys 'R' Us [[exclusive]] two-pack, this set features "Supermetal Finish" (read: shiny) versions of the "Robot Master" ''Titaniums'' Optimus Prime and Bumblebee.

{{-}}

==First 4 Figures==
[[File:First 4 Figures Battlefield Optimus vs Megatron.jpg|thumb|upright=1.66]]
*'''Optimus Prime vs Megatron''' (2006)
**''Accessories:'' extra head for Megatron (with detachable helmet), extra hand for Optimus Prime
{{toydesigner|[[Little IroN]] (concept artist), [["Mad" Alterton]] (sculptor), [[Leandro Sivori]] (painter)}}

:The first entry in the ''Transformers Battlefield'' line by model company [[First 4 Figures]], this 13-inch tall diorama depicts Optimus Prime slugging it out with Megatron. Optimus is posed as though doing a shoulder shove while holding his ion blaster, but a provided "REP" (Replaceable Exterior Part) hand allows buyers to instead recontexualise the pose as a spinning backhand slap. Megatron comes with a REP of a battle damaged version of his head, which features a detachable "helmet" to show off his exposed robo-brain.

:The model was limited to 1,850 pieces worldwide, and came with a numbered certificate of authenticity, which allowed buyers to reserve the same number on their next purchase in the series. It also came with an A4 mini-poster depicting the same fight between Optimus and Megatron by artist [[Little IroN]], which was also sold separately as a limited edition A2 poster.

:As a ''Transformers Battlefield'' release, this model featured a detailed base designed to interlock with others in the same range to create a massive battle diorama. Unfortunately, a general discontinuation of First 4 Figures' ''Transformers''-related output put the kibosh on any further ''Battlefield'' models.

{{-}}{{anchor|F4F1}}
[[File:SnakeEyes OptimusPrime statue.jpg|thumb|upright=1.66|Get with the program.]]
*'''Optimus Prime and Snake Eyes''' (<s>2006</s> unreleased)

:Initially announced at UK Toy Fair in 2006<ref>[https://news.tfw2005.com/2006/01/25/first4figures-beast-wars-and-transformers-vs-g-i-joe-statuesbusts-4267 "First4Figures Beast Wars and Transformers VS. G.I. Joe Statues/Busts"] at TFW2005.com</ref> with a second showing at New York [[Toy Fair]] the following month,<ref>[https://tformers.com/transformers-/5568/news.html "Toy Fair 2006 - First4Figures TF & GI Joe Statues& Busts"] at tformers.com</ref> "Optimus Prime and Snake Eyes" was intended to be one of the first releases in First 4 Figures' ''[[G.I. Joe vs. the Transformers]]'' comic tie-in subline. This 8-inch tall bust depicted a one-armed Optimus Prime in the [[Cobra]] [[H.I.S.S. tank|HISS tank]] body he used in that series holding a battle-ready [[Snake-Eyes#First 4 Figures|Snake Eyes]], directly recreating the cover to the [[G.I. Joe vs. the Transformers issue 1|first issue]] of the comic (originally drawn by [[Mike S. Miller]]).

:Unfortunately, this statue was a casualty of F4F's discontinuation of ''Transformers'' product, the result of a challenging marketplace and lack of retailer interest.
{{canceledtoy}}

{{-}}{{anchor|F4F2}}
[[File:StormShadow OptimusPrime statue.jpg|thumb|upright=0.85|Hey, Private Haircut! I might have taken a bit too much off...YOUR HEAD!]]
*'''Optimus Prime vs Storm Shadow''' (2007)
{{toydesigner | [[Siamak Roshani]], [[Joel Chen]] (sculptors)}}
:The third reveal in the ''G.I. Joe vs. the Transformers'' series, this statue is 7.5 inches tall and depicts [[Storm Shadow#First 4 Figures|Storm Shadow]] in a victorious stance on Prime's damaged, disembodied head, based on the cover of [[G.I. Joe vs. the Transformers issue 5|''G.I. Joe vs. the Transformers'' issue 5]] (also by Miller). Storm Shadow is only a mite bigger than your standard 3.75" ''G.I. Joe'' figure, making this statue roughly in scale with the rest of your collection!

:After being revealed at [[San Diego Comic-Con]] in 2006,<ref>[https://tformers.com/ig.php?mode=album&album=6265&dispsize=800&start=0 Tformers.com's SDCC 2006 gallery]</ref> "Optimus Prime vs Storm Shadow" was released in January 2007, holding the dubious honour of being the only one of First 4 Figures' ''G.I. Joe vs. the Transformers'' range to see release. The statue was limited to 250 pieces in the U.S., and 250 pieces in the UK.

::*''[https://www.yojoe.com/archive/statuary/stormshadowprime/ More information on Optimus Prime vs Storm Shadow at YoJoe.com]''

{{-}}

==Diamond Select==
[[File:Optimus Prime Mini-bust.jpg|thumb|"I can't roll out without my legs installed!"]]
*'''Optimus Prime''' (Diamond Select, 2007)
:A mini-bust of Optimus Prime based on his appearance in the comic was released by [[Diamond Select Toys|Diamond Select]] in 2007. The figure includes the upper body of Optimus Prime, carrying his laser rifle and posed as if preparing to charge. The Matrix of Leadership is sculpted into the base of the statue.

{{-}}
[[File:Ark Globe.jpg|thumb]]
*'''Autobot Snow Globe''' (Diamond Select, 2007)

:Optimus Prime is also featured in Diamond Select's Autobot-themed snow globe, posing above a [[Mount St. Hilary]] base which also features the ''[[Ark (G1)|Ark]]'' and [[Omega Supreme (G1)|Omega Supreme]]. The globe was sculpted by [[Art Asylum]].

{{-}}

[[File:DST08 FinalBattlePrimeBust.jpg|thumb|Hold this for a moment won't you.]]
*'''Final Battle Optimus Prime''' (Diamond Select, 2008)
:Final Battle Optimus Prime was exclusive to the online retailer Action Figure Xpress. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and limited to 1000 pieces. Optimus Prime is shown after his climactic battle with Megatron during Transformers: The Movie; shortly before he passed the Matrix of Leadership (which is also removable here) to Ultra Magnus. His base features the life support readout that monitored both his declining health and eventual death.

{{-}}

{{anchor|G1AnimatedOptimusPrimeBust}}
[[File:DST SDCCToonPrimeBust.jpg|thumb]]
*'''G1 Animated Optimus Prime''' (Diamond Select, 2008)
:G1 Animated Optimus Prime was exclusive to the 2008 San Diego Comic Con. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and features a more matte color scheme to better match the cartoon's palette.

{{-}}

[[File:DiamondSelect PowermasterOptimus.jpg|thumb|"It's not great to be back."]]
*'''Powermaster Optimus Prime''' (Diamond Select, 2010)

:This fourth Optimus Prime bust was to be based on his [[Powermaster]] incarnation, but appears to have been canceled.

{{canceledtoy}}

{{-}}
[[File:DiamondSelect OptimusPrime bustbank.jpg|thumb|"Saving Money is the right to all Sentient Beings".]]
*'''Optimus Prime Bust Bank''' (Diamond Select, 2010)

:A 6-inch hollow Optimus Prime bust to keep your spare change safe! It would've featured articulation in its shoulders and neck, but like the Powermaster bust, it never saw release.

{{canceledtoy}}
{{-}}

==''Transformers'' (2007)==
*'''Optimash Prime''' (2007)
{{main|Optimash Prime}}
{{-}}
[[File:Softimus Prime.jpg|thumb|Freedom is the right of all sentient beings... in bed.]]
*'''Softimus Prime''' (2007)

:Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He features Movie-style faction symbols on his right arm and both sides of his cab mode. He is love.

::*''[http://www.tfu.info/2007/Autobot/SoftimusPrime/softimusprime.htm More information on Softimus Prime at TFU.info]''

{{-}}

==''Robot Heroes''==
[[File:RH Optimus vs Ravage.jpg|thumb|upright=1.66|Mini-Me!]]
*'''Optimus Prime & Ravage''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Part of the first wave of ''[[Robot Heroes (toyline)|Robot Heroes]]'' 2-packs (sold under the [[Transformers (2007 toyline)|2007 live-action-movie line]] branding), Optimus Prime is a simple, yet well-detailed two-inch tall figurine with exaggerated, cartoony proportions, with swivel articulation at the neck and shoulders. He is sculpted holding his Ion Blaster rifle in his right fist and his left arm in a pointing pose. He is also love, and demands that you pull his [[More than Meets the Eye, Part 3#Notes|Finger of Doom]].

: He was sold in a two-pack with [[Ravage (G1)/toys#Robot Heroes|Ravage]], positioned in a way that gives an impression of [http://orig12.deviantart.net/b22b/f/2008/216/7/1/optimus_prime_vs_ravage_by_cobaltkitty.jpg him freaking out to Ravage's size].

: This version of Optimus was later also released as part of a set with a 100-piece [[jigsaw puzzle]] with no apparent changes.

{{anchor|RHBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: In some countries outside of North America, Optimus Prime was released individually in a blindpack with no notable changes.

{{-}}{{anchor|RH5pack}}
[[File:Robot Hero Supermetal Optimus Prime.jpg|thumb|upright=0.99|Cuteness is the right of all sentient beings.]]
*'''Decepticon Sneak Attack''' (Multi-pack, 2007)

: "Optimus Prime with Supermetal Finish" is a slightly-shinier [[redeco]] of the previous ''Robot Heroes'' figure; this is the most noticeable with his blue parts, which are now in a much brighter, richer gloss-blue paint rather than the unpainted darker-blue matte plastic of the two-pack version.

: He came in a [[Walmart]] exclusive multipack, alogn with [[Mirage (G1)/toys#RH5pack|Hologram Mirage]], [[Cliffjumper (G1)/toys#Robot Heroes|Cliffjumper]], "Supermetal Finish" [[Megatron (G1)/merchandise#RH5pack|Megatron]], and [[Skywarp (G1)/toys#Robot Heroes|Skywarp]].

{{anchor|RHFinishBlindpack}}
*'''Optimus Prime with Supermetal Finish''' (Single-pack, 2008)

: "Supermetal Finish" Optimus Prime also saw release in a blindpack outside of North America.

{{-}}{{anchor|RHUnicron}}
[[File:RH Prime vs Unicron.jpg|thumb|upright=1.66|'Til all are cute.]]
*'''Optimus Prime & Unicron''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Sold in the third wave of ''Robot Heroes'', this version of Optimus is posed opening the [[Matrix of Leadership]], complete with clear-plastic shine.

: He was packed with a very small [[Unicron/toys#Robot Heroes|Unicron]].

{{anchor|RHMatrixBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: Just like the previous figures, the Matrix-bearing Prime also received a blindpacked release.
{{--}}

==''Attacktix''==

*'''Optimus Prime''' (Starter Set, 2007)
[[File:Attacktix Optimus Prime.jpg|thumb|He shoots sideways. The direction, not [[Sideways (Armada)|the character]].]]
{{attacktix
|ID=TF2-19
|faction=Autobot
|class=Leader
|special=Last Stand - 13/26 (50%) success ratio
|cost=40
|speed=6
|attacktype=Shooter (Force Blast)
}}
{{-}}
:Optimus Prime will shoot you down. He was released as part of the 2007 Starter Set along with ''[[The Transformers (franchise)|Generation 1]]'' [[Megatron (G1)/toys|Megatron]], ''[[Transformers: Energon (franchise)|Energon]]'' [[Landquake (Energon)|Landquake]] and ''[[Transformers: Cybertron (franchise)|Cybertron]]'' [[Skywarp (Armada)|Skywarp]].

:Optimus' Last Stand special allows him to stand up if he's the only figure in your team left in play. If you're down to two men you might even be tempted to shoot your own man just to keep Optimus Prime in play. Don't though. [[Peter Cullen]] wouldn't approve.

:Sadly you can't bring him into play with the ''Cybertron'' [[Optimus Prime (Armada)/toys|Super Optimus Prime]] vehicle mode because he's not ''Super'' Optimus Prime.
{{-}}

==''Revoltech''==
[[File:Revoltech Convoy.jpg|thumb|upright=1.66|Windowbra! ''(2007 Version pictured)'']]
*'''Convoy''' (2007/2014)
**''Series number:'' '''019'''
**''Legacy of Revoltech ID number'': '''LR-008'''
**''Accessories:'' Ion blaster, Autobot Matrix of Leadership, two clenched fists, gun-wielding right hand, pointing right hand, open left hand

:A non-transforming but ''highly'' articulated Optimus Prime action figure, ''[[Revoltech]]'' Convoy uses the ''Revoltech'' "revolver joints" for maximum poseability. Prime comes with his now-standard ion blaster and Matrix of Leadership accessories, as well as a few alternate hands; while one of the hands is specifically designed to grip the ion blaster, he can't really do anything dramatic with the Matrix, and it just sort of sits in his open-palmed left hand. His sculpting is explicitly in the style of [[Pat Lee|Pat "serfdom" Lee]]'s interpretation of Prime, but due to physical constraints has no lack of perspective.

:Unsurprisingly, this mold was redecoed to create ''Revoltech'' [[Ultra Magnus (G1)/merchandise#Revoltech|Ultra Magnus]]. Magnus comes with a new hand mold that can be used to connect him and Prime together in a handshake.

:The initial reveal of the figure (sculpted by Yamaguchi) features swiveling cut joints instead of "revolver joints" (notably the hip parts), with a rather jarring angled joint on the waist (which results in a "sliced" appearance if swiveled).

:Unfortunately, ''Revoltech'' Convoy cannot be distributed to the US due to licensing restrictions, so fans must rely on online hobby shops to import him.

:In 2014, ''Revoltech'' Convoy was reissued as part of the ''Legacy of Revoltech'' line, with an increased price of 3900 yen. This rerelease uses revised Revoltech joints, which come in matte black instead of glossy and have more ratcheting points than previous releases.
{{-}}
===''Amazing Yamaguchi''===
[[File:Tf-Yamaguchi-Revoltech-014-Convoy.jpg|upright=1.66|thumb]]
*'''Convoy''' (2019)
**''Series number:'' 014
**''Accessories:'' Ion Blaster, Energon Axe, 1 pair of splayed hands, 1 pair of trigger hands, left clawed hand, right pointing hand, interlocked hand

:''Amazing Yamaguchi'' Convoy is an all-new take to the Revoltech figure above, but more poseable. Apart from the Ion Blaster, this figure comes with an Energon Axe accessory, and an interlocked hand accessory that is designed to resemble the haymaker that took down Megatron in ''[[The Transformers: The Movie]]''.

:Unlike the first Revoltech figure, Convoy features painted-details-on-colored-plastic rather than fully coating them. The plastic is noted to have a hollow feel compared to the first figure.

:Due to production delays, the release date was rescheduled from September 29 to October 24.
{{-}}

==Sota Toys==
*'''Transformers Chess Set''' (<s>2007</s>)
:An Optimus Prime piece was to be the Autobot-side King on a [[Chess#Sota Toys|chess set]] based on Generation 1, but the set apparently never saw release.
{{canceledtoy}}
{{-}}

==Ornaments==
*'''Optimus Prime''' (2007)
[[File:OptimusPrimeG1Ornament.jpg|thumb|100px|''(American Greetings version pictured)'']]

:Manufactured by [[American Greetings]] as part of their Heirloom ornament collection, this hanging sculpt of Optimus Prime is based upon the 20th Anniversary toy release.
{{-}}

*'''Optimus Prime''' (2014)
[[File:Optimus-prime-keepsake-Hallmark.jpg|thumb|''(Hallmark version pictured)'']]
:Manufactured by [[Hallmark]] as part of their Keepsake ornament collection as part of the Hasbro series which includes ornaments based on [[My Little Pony]] G1, the electronic game Simon, and the board game Sorry, this hanging sculpt of Optimus Prime is based upon the original G1 toy cab in robot mode posed like 1984 box art.
{{-}}

==''Mighty Muggs''==
[[File:MightyMuggs OptimusPrime.jpg|thumb|Optimus lost his ears in the rock tumbler.]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: This [[super deformed]], non-transformable Optimus Prime figure uses the standard [[Mighty Muggs]] body template, with swivel joints in his neck and limbs. He comes with a similarly super-deformed version of his ion rifle.
{{-}}

{{anchor|SDCCmightymugg}}
[[File:MightyMuggs MetallicOptimusPrime.jpg|thumb|Optimus, did you polish your head in the Shine-O Ball-O?]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: An [[exclusive]] to the 2009 [[San Diego Comic-Con]], this Optimus Prime Mugg has a shiny metallic finish.
{{-}}

{{anchor|2018mightymugg}}
[[File:MightyMuggs 2018 Optimus.jpg|thumb|upright=1.44|You ever get so mad you sprout new ears?]]
*'''Optimus Prime''' ([[2018]])
**''ID number:'' '''01'''

: Based on his [[evergreen]] design, this Optimus is part of the 2018 ''Mighty Muggs'' relaunch. As part of the new line, he has a helmet that can be pressed down to change his expression. He features three different faces: [[Mouthplate|classic]], angry, and angrier.
{{-}}

==Transformers Wacky Wobblers==
[[File:WackyWobblers G1OptimusPrime.jpg|thumb|upright=0.85]]
*'''Optimus Prime''' (2009)

: This Optimus Prime {{w|bobblehead}} is part of the popular ''[[Wacky Wobblers]]'' line produced by {{w|Funko}}. Aside from the standard-issue big wobbling head, he features an ion rifle molded onto his right hand and his arms swivel at the shoulders. Optimus is affixed to a base with his name on it.
{{-}}

==USB-Powered Speaker Head==
*'''Optimus Prime USB-Powered Speaker Head'''
[[File:G1-optimusprime-merc-speaker.jpg|thumb]]
: As a 6.5" figure, Optimus Prime's head contains twin {{w|Universal Serial Bus|USB}}-powered speakers. There are two speakers inside each side of his head. The control panel, USB port, and earphone port are located in the back of the head. Under the neck, there is a display to support the head.
: The speaker was redecoed to create Ultra Magnus Speaker.
{{-}}

==Transformers Backpacks==
*'''Optimus Prime''' (2009)

:Made by [[F*A*B Starpoint]], these backpacks are allegedly "engineered for style, safety, comfort... and saving the Universe!" The Generation 1 Optimus Prime design features a stock silhouette of Optimus Prime surrounded by stars, like the [[Paramount Pictures]] logo, while on the lower compartment there is a gigantic Autobot sigil.

==Universal Studios==
*'''Optimus Prime plushie''' (2011)

:Created for the [[Transformers: The Ride – 3D|Transformers ride at Universal Orlando]], a [[super deformed]] plush toy of Optimus was made available at the Supply Vault gift shop near the opening of the ride.

==Tomica==
[[File:TF-Tomica-Wrapping-Trailer.jpg|thumb]]
*'''Transformers Wrapping Trailer''' (2011)
:''[[Tomica]]'' "Transformers Wrapping Trailer" is a die-cast, non-transforming semi tractor-trailer. A redeco of the 2008 "[[wikia:tomica|Tomica Hero: Rescue Force Trailer]]" toy, "Transformers Wrapping Trailer" renders the cab in Generation 1 Optimus Prime colors, while the trailer is decked out with pictures of [[live-action film series]] [[Optimus Prime (Movie)|Optimus Prime]], [[Bumblebee (Movie)|Bumblebee]] and [[Ironhide (Movie)|Ironhide]]. Like all Tomica toys & all [[Go-Bot (G2)#Toys|''Generation 2'' Go-Bots]] and [[Spychanger]]s, Wrapping Trailer features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces.
{{-}}

==Transformers x Mimobot==
[[File:Mimobot OptimusPrime.jpg|thumb|upright=1.66|Why the long face?]]
*'''Optimus Prime Mimobot''' (Mimoco, 2011)
:Produced by [[Mimoco]] as part of their multi-brand line of designer USB "Mimobot" flash drives, this Optimus Prime memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.
{{-}}

==Cuponk==
[[Image:NYCC2011 Cuponk.jpg|thumb|250px|The real contest is whether Prime's medal or Megatron's belt is cooler.]]
*'''Transformers Cuponk''' (2011)
:A New York Comicon exclusive, this set includes two Cuponk cups and 6 ping pong balls. Prime is featured on one cup and one ping pong ball. The same cup also features [[Bumblebee (G1)|Bumblebee]], [[Jazz (G1)|Jazz]], [[Grimlock (G1)|Grimlock]], and [[Hot Rod (G1)|Hot Rod]].
{{-}}

==Titan Warriors==
[[File:Titan-Warrior-Optimus-Prime.jpg|upright=1.11|thumb|Sofubi Hero figures are the right to all young sentient beings.]]
*'''Titan Warrior 5-Pack''' (2013)
:Available at San Diego Comic Con 2013, This Optimus Prime is a 6" PVC Titan Warrior figure (similar to Bandai's ''Ultra/Sentai/Rider Hero, Movie Monster Series'') representing his Generation 1 character. He was packed with [[Grimlock (G1)/toys|Grimlock]], [[Megatron (G1)/toys|Megatron]], [[Starscream (G1)/toys|Starscream]] and [[Soundwave (G1)/toys|Soundwave]].

*'''Optimus Prime''' (Titan Warrior, 2014)
:The Titan Warriors Optimus Prime toy was released individually, under the Beast Hunters Titan Heroes subline.

{{-}}

==''The Loyal Subjects''==
*'''Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Talking}}
*'''Talking Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Larger}}
*'''Talking 5.5" Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Blank}}
*'''8" Blank/DIY Optimus Prime''' (2014)
{{anchor|The Loyal Subjects OG}}
*'''8" OG Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Fiberglass}}
*'''4' Fiberglass Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Hot Topic}}
*'''Talking 5.5" Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Dead}}
*'''8" Dead Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Silver}}
*'''8" Silver Bullethole Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Gold}}
*'''8" Gold Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Black Gloss}}
*'''8" Black Gloss Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Gamestop}}
*'''Talking Optimus Prime''' (2014)
{{charstubtoys}}
{{-}}

==''Mecha Nations''==
[[File:klog tfop 003.jpg|thumb|upright=1.66|Prime, not the shrink wrap!]]
*'''Optimus Prime''' (2014)
**''ID Number:'' '''MN01'''
**''Accessories:'' Ion Blaster, Energon Axe, Removable Armor.

:Created by [[Kids Logic]], this [[super deformed]] G1 Optimus Prime stands 6" tall and is articulated. He features a metallic color scheme, removable armor and replacement hands. He also features LED light up eyes, lights, weapons and [[Matrix of Leadership|Creation Matrix]].

:This figure was also redecoed into Mecha Nations [[Nemesis Prime (G1)#Mecha Nations|Black Convoy]] and [[Ultra Magnus (G1)/merchandise#Mecha Nations|Ultra Magnus]].

{{-}}

==''Ultimetal''==
[[File:Ultimetal-UM01-Optimus-Prime.jpg|upright=1.66|thumb|"Why waste your money so easily Prime?"]]
*'''Optimus Prime''' (2014)
**''ID number:'' '''UM-01'''
**''Accessories:'' Ion blaster, energon-axe, small Matrix, 24 armor pieces, 2 smokestacks, large Matrix, display stand, 8 display stand parts, remote control

: ''Ultimetal'' Optimus Prime is a large non-transforming figure produced by [[Art Storm]], standing at an impressive 1 foot 4 inches/43 cm and made from extensive [[die-cast]] metal. Packaged in four different boxes, he features plenty of articulation and detail, including an opening chest and numerous magnetically attached armor panels that, when removed, reveal Prime's internal anatomy. He also has electronic light-up eyes and roof lights as well as 20 spoken English phrases, all activated via remote control. His [[mouthplate]] even moves when he talks, just like in the cartoon!

: Prime comes with an ion blaster which can also be opened to reveal technical detail, an energon-axe, and two Matrices of Leadership of different sizes. The smaller one fits into his chest, where it can be lit up by an LED, while the larger one lights up on its own and can be held in his hands or placed on display. Prime's display stand has smaller stands for the Matrix and ion blaster and also has light-up parts.

: Optimus Prime was recolored into the inner robot of ''Ultimetal'' [[Ultra Magnus (G1)/merchandise#Ultimetal|Ultra Magnus]].

::*''[http://artstorm.co.jp/ultimetal_optimusprime.html More information on ''Ultimetal'' Optimus Prime at Art Storm's official site]''

*'''Optimus Prime - Battle Damaged''' (2018?)
**''ID number:'' '''UM-01BD'''

{{-}}

==''EX Gōkin''==
[[File:EXGokin Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2014)
**''Accessories:'' Two fists, two open hands, two gripping hands, right pointing hand, ion blaster, energon-axe, display stand

: A 6.6-inch tall non-transforming Optimus Prime action figure was produced by Art Storm as part of their ''EX Gōkin Transformers Series'' line. He comes with his trademark blaster and energon-axe as well a number of extra hands, and his chest opens to reveal a non-removable Matrix.

::*''[http://artstorm.co.jp/exgokin_transformersseries_convoy.html More information on ''EX Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==Hikari==
[[File:HikariLimitedEditionMetallicOptimusPrime.jpg|thumb|upright|150px]]
*'''Metallic Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime with a metallic finish. This figure is a limited edition, and limited to 2,000 pieces.

:This mold was also used to make the other limited edition Optimus Primes seen below.

{{-}}
[[File:HikariLimitedEditionClearGlitterOptimusPrime.jpg|thumb|upright|150px]]
*'''Optimus Prime Clear Glitter''' (2014)

:A non-transforming vinyl Optimus Prime figure. While retaining the classic, original colors, this mold is redone to be clear plastic, with glitter bits put into the figure. This vinyl is a limited edition, and limited to 3,000 pieces.

{{-}}
[[File:HikariLimitedEditionBattleReadyOptimusPrime.jpg|thumb|upright|150px]]
*'''Battle Ready Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The mold is Redon again, this time in a battle-damaged look, while he retains the classic Optimus Prime colors. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionGreySkullOptimusPrime.jpg|thumb|upright|150px|By the power of Grayskull... '''''I HAVE THE POWER!''''']]
*'''Grey Skull Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. This vinyl takes the colors in a different way, which is mostly white with some dark grey areas. The colors to kinda look skeleton-ish. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDistressedOptimusPrime.jpg|thumb|upright|150px]]
*'''Distressed Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The colors take on an [[Optimus Prime (Movie)#''Age of Extinction'' film|Age of Extinction Optimus Prime]], in his flat-nose truck mode. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionFireOptimusPrime.jpg|thumb|upright|150px]]
*'''Fire Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in clear plastic. The colors seem to homage the Generation 1 [[Hot Rod (G1)|Rodimus Prime]].,This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDangerousOptimusPrime.jpg|thumb|upright|150px]]
*'''Dangerous Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, done in a camouflage style. This figure is a limited edition, and limited to only 600 pieces.

{{-}}
[[File:HikariLimitedEdition24KOptimusPrime.jpg|thumb|upright|150px]]
*'''24K Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in gold plastic. This figure is a limited edition, and only limited to 600 pieces.

{{-}}
==''Thrilling 30''==
*'''Optimus Prime''' (Collectible Figurine, 2014)
**''Series / Number:'' '''1 / #1'''
**''Accessories:'' Collector's base
:A super-deformed Optimus Prime was released among the blindpacked [[Thrilling 30#Collectible Figurines|''Thrilling 30'' Collectible Figurines]] by [[Goldie Marketing]]. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

*'''Collectible Figurines''' (5-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 5 Collector's bases
:The same Optimus Prime figurine was also available in a 5-pack alongside [[Megatron (G1)/merchandise#Thrilling 30|Megatron]], [[Ratchet (G1)/toys#Thrilling 30|Ratchet]], [[Starscream (G1)/merchandise#Thrilling 30|Starscream]] and [[Soundwave (G1)/merchandise#Thrilling 30|Soundwave]].

*'''Optimus Prime 3-pack''' (3-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 3 Collector's bases
:The same Optimus Prime figurine was ''also'' available in a 3-pack alongside [[Optimus Prime (WFC)/merchandise#Thrilling 30|''Prime'' Optimus Prime]] and [[Optimus Prime (Movie)/merchandise#Thrilling 30|Movie Optimus Prime]].
{{-}}

==Leg Avenue==
{{anchor|LegAvenue}}
[[File:Leg Avenue Optimus Prime.jpg|right|upright=.75|thumb|]]
:Costume and lingerie manufacturer Leg Avenue released an officially licenced Bumblebee costume along side ones for [[Bumblebee (G1)/merchandise#LegAvenue|Bumblebee]] and [[Megatron (G1)/merchandise#LegAvenue|Megatron]].

{{-}}

==''Tiny Titans''==
*'''Optimus Prime''' (Tiny Titans, 2015)
**''Series'': '''2'''
**''Number'': '''10/12'''

: Part of the third assortment of ''[[Tiny Titans]]'' [[blindpacking|blindpacks]], this version of Optimus Prime is a very small, soft-plastic figure of him in robot mode, brandishing both his rifle and his energy-axe weapon in a running battle pose.

: He includes a collectible card that renders him in the [[Transformers: Robots in Disguise (2015 franchise)|2015 ''Robots in Disguise'']] styling. The card includes a scan-badge for the [[Transformers: Robots in Disguise (mobile game)|''Robots in Disguise'' mobile game]], which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.

{{-}}{{anchor|TinyTitans2}}
[[File:TinyTitans OptimusG1S5.jpg|upright=1.67|thumb]]
*'''Optimus Prime''' (Tiny Titans, 2016)
**''Series'': '''5'''
**''Number'': '''11/12'''

: Part of the fifth assortment of ''Tiny Titans'', this version of Optimus is in a more neutral pose, this time only carrying his rifle.

: As per usual, he includes a collectible card that includes a scan-badge for the ''Robots in Disguise'' mobile game, which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.
{{-}}

==''D-Style''==
[[File:D-Style-OptimusPrime.jpg|thumb|upright=1.66|You got D-touch. You got D-power]]
*'''Convoy''' (2015)
**''ID number:'' '''43'''
**''Accessories:'' Two fists, pointing right hand, Ion blaster, energon-axe, Autobot Matrix of Leadership, Convoy cab with trailer

:An Optimus Prime was produced by [[Kotobukiya]] as part of ''[[D-Style]]'', their franchise-spanning line of super deformed model kits. His accessories include an ion blaster, an energon-axe, a Matrix that can store in his chest, and a tiny super deformed representation of his truck mode which can carry the ion blaster. Moving his antennae causes his mouthplate to move up and down.

:For a small figure it includes a large amount of articulation, including ankle tilts and top of legs tilting away from the yellow codpiece.

: The Convoy Trailer, ion blaster and the gold part of the Matrix all require painting. In addition, on promotional images ''all'' the black details and lines (for example on the front thighs and round the edge of the yellow codpiece) are painted and the eyes have been painted blue instead of left as clear plastic.

: Amusingly, the head has the [http://www.1999.co.jp/itbig29/10294593z.jpg mouth-less face] underneath Optimus' mouthplate, as a either a reference to the error from [[The Search for Alpha Trion]] or limitation in the model kit (or both).

:This mold was also used to make ''D-Style'' [[Nemesis Prime (G1)#D-Style|Black Convoy]].
{{-}}

==''ES Gōkin''==
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe, Matrix, left & right gripping hands, left & right open hands, left & right pointing hands, display stand

:Optimus Prime was also released as part of Art Storm's ''ES Gōkin'' series, a line of posable super deformed figures. He comes with his trademark gun which he can hold in either hand, an energon-axe that plugs into his wrist sockets, and a Matrix he can hold but not store in his chest.

::*''[http://artstorm.co.jp/esgokin_convoy.html More information on ''ES Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==''D-Collection''==
[[File:D-Collection Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe

:[[Kabaya]]'s ''D-Collection'' Optimus Prime is a small super deformed figure that requires some assembly and features articulation limited to his shoulders. He comes with his trademark blaster and axe accessories. Sold blindpacked, Prime is available as both a standard full color figure and a rare clear plastic version. He comes with chewing gum.
{{-}}

==''Metal Earth''==
[[File:Metal Earth Optimus Prime.jpg|thumb]]
*'''Optimus Prime''' (2015)
**''ID number:'' '''MMS300'''
:''[[Metal Earth]]'' Optimus Prime is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".
{{-}}
[[File:Metal Earth Legends Optimus Prime.jpg|thumb|[[Minecraft|Minecraft x Transformers]] before ''Minecraft x Transformers'' was a thing]]
*'''Optimus Prime''' (Legends, 2019)
**''ID number:'' '''MEM055'''
:''Metal Earth Legends'' Optimus Prime is a DIY 3D steel model kit in the shape of a super deformed version of the [[evergreen]] Optimus design. The kit's difficulty rating is given as "moderate".
{{-}}

==Hot Toys==
*'''Optimus Prime (Starscream Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Ion Blaster, two wings, two wing mounts, two null-rays, Matrix of Leadership, Base, Starscream's head (Sideshow Collectable's exclusive)

:Released by [[Hot Toys]] this high end collector figure stands approximately 30 cm tall. It features LED light up eyes and it's chest can open to reveal a LED light up, removable Matrix of Leadership. This version comes with a pair of wings and two [[null-ray]]s from Starscream that Optimus can attach. The Sideshow exclusive version of this comes with Starscream's severed head.

*'''Optimus Prime (Megatron Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Fusion cannon, Ion Blaster, gun with stock, set of wheels, two cannon mounting accessories, shoulder mount, Matrix of Leadership, Base

:This version of the figure has accessories themed from Megatron. These include Megatron's [[fusion cannon]], and a long rifle that passingly resembles Megatron's original gun mode. Both can be combined into a large two handed cannon.

{{-}}

==''Block Wars''==
*'''Optimus Prime''' (2016)
**''Number:'' '''1'''

:Part of [[Kabaya]]'s ''[[Transformers Block Wars]]'' candy toy line, this Optimus Prime kit is surprisingly, based on his [[Optimus Prime (G1)/toys#Cyber Series|Cyber Series Commander toy]]. Molded in red, blue, and yellow plastic with detailing from stickers, he transforms into a truck when finished and is armed with a two-pronged spear. He can also be taken apart and combined with ''Block Wars'' [[Bumblebee (G1)/toys#Block Wars|Bumblebee]], [[Megatron (G1)/merchandise#Block Wars|Megatron]] and [[Starscream (G1)/toys#Block Wars|Starscream]] in various configurations, the ones involving Prime shown on the packaging being:

:*Giving Prime Starscream's wings as a jetpack and arming him with Megatron's cannon.
:*Placing Megatron's turret on Prime's truck mode.
:*Giving Bumblebee Prime's spear, Megatron's arms and Starscream's wings.
:*Attaching Prime and Starscream's legs to Megatron's vehicle mode to create a walking tank.
:*Powering Starscream up by attaching Prime's spear to his back and giving him Bumblebee's weapons.
:*Combining all four into an unnamed combiner, with Optimus Prime forming the torso and upper legs.

==''Transformers Figure Collection''==
[[File:TF-Transformers-Figure-Collection-Optimus-Prime-Decoy.jpg|thumb]]
*'''Convoy''' (01-2016)

:Standing 42mm tall, ''Transformers Figure Collection'' Optimus Prime is a non-poseable soft-rubber figure greatly based on a [[Decoy (G1)|Decoy]] figure.

{{-}}

==''Hero of Steel''==
[[File:HeroofSteel Convoy.jpg|thumb|upright=1.11]]
*'''Convoy''' (2016)
**''Accessories:'' Ion blaster

:Produced by Alpha Max, ''Hero of Steel'' Convoy is a stylized, non-transforming figure standing at 9 inches/23 cm tall. He comes with his ion blaster.

{{-}}

==Bitfig==
[[File:Bitfig-Part-1.jpg|thumb|]]
*'''Convoy''' (12-2016)
Part of the first wave of Transformers Bitfig capsule toys by [[TakaraTomy A.R.T.S]],
Convoy's design is inspired by his appearance in the G1 cartoon, and is articulated at the neck and shoulders.
Bitfig toys were packaged in capsules color coded to the toy they contained.
{{-}}

==Prime 1 Studio==
===''Premium Masterline''===
[[File:TF-Premium-Masterline-PMTF-01-Optimus-Prime.jpg|upright=1.55|thumb|"Just in case you want to say "''I should've looked like this in the movies''", yes, I heard you."]]
*'''Optimus Prime''' (2017)
**''ID Number'': '''PMTF-01''' / '''01EX''' (exclusive)
**''Accessories'': Base, Fusion axe (exclusive), Energy axe (exclusive)

:One of the very first releases of the ''Premium Masterline'' series by [[Prime 1 Studio]], this Optimus Prime is a ''massive'' non-transforming statue based on his Generation 1 appearance with a blend of live-action film aesthetic, and features light-up LED eyes. The statue was also designed by [[Josh Nizzi]] himself. If customers had purchased the statue at [https://www.sideshowtoy.com/collectibles/transformers-optimus-prime-transformers-generation-1-prime-1-studio-9027641/ Sideshow's website], they would receive exclusive Energy and Fusion axes, which can be used to replace Prime's Ion Blaster-holding hand. The standard version was limited to 1500 pieces, while the exclusive version was limited to 750 pieces.

:This statue was later redecoed as [[Nemesis Prime (G1)#Prime 1 Studio|Nemesis Prime]] and [[Ultra Magnus (G1)/merchandise#Prime 1 Studio|Ultra Magnus]]. The statue's model also served as an inspiration to [[Optimus Prime (Movie)|Movie Optimus Prime]]'s appearance in the ''[[Bumblebee (film)|Bumblebee]]'' film.

{{-}}{{anchor|P1SGold}}
[[File:TF-Premium-Masterline-PMTF-01GL-Optimus-Prime-Gold-Edition.jpg|upright=1.55|thumb]]
*'''Optimus Prime Gold Version''' (2018)
**''ID Number'': '''PMTF-01GL'''
**''Accessories'': Base, Fusion axe

:Limited to 500 pieces, Optimus Prime Gold Version is a redeco of the statue above, evoking his Electrum-coated appearance in the Generation 1 episode "[[The Golden Lagoon (episode)|The Golden Lagoon]]". He also comes with a Fusion axe accessory that can replace his Ion Blaster hand.

{{-}}
===''Age of Time''===
[[File:Prime 1 Studio Superior Optimus Prime.jpg|upright=1.55|thumb]]
*'''Superior Optimus Prime''' (<s>201?</s>)

:''Age of Time'' Superior Optimus Prime was designed to be the "ultimate amalgamation" between G1 and movie Optimus Primes. He would have come with two blasters and a huge jetpack, specifically taking cues from Prime's combined form with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]''.

:For reasons unknown, this figure was silently canceled.
{{canceledtoy}}

{{-}}
===''Cutie1''===
[[File:Cutie1 Optimus Prime Figure.jpg|upright=1.11|thumb|''Transformers X Coraline'', directed by [[Travis Knight]].]]
*'''Optimus Prime''' (2022)
**''ID Number'': '''No:055'''
**''Accessories'': Stand

:A striking departure from previous Prime 1 Studio offerings, ''Cutie1'' Optimus Prime is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

:He was later redecoed as ''Cutie1'' [[Nemesis Prime (G1)#Cutie1|Nemesis Prime]].

{{anchor|Cutie1keychain}}
*'''Optimus Prime''' (Keychain, 2021)
**''Accessories'': Stand, chain

:Part of a marketing push following the announcement of the figure above, an acrylic keychain of ''Cutie1'' Prime was released, along with other products such as stickers, T-shirts, hand towels and totebags using the design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.

{{-}}{{anchor|P1SWFC}}

===''War for Cybertron Trilogy''===
[[File:Prime-1-Studio-WFC-Optimus-Prime.jpg|upright=1.66|thumb|"Why... have I... been... canceled?"]]
*'''Optimus Prime''' (<s>2022</s>)
**''ID Number'': '''PMTF-05''' / '''05UT''' (Ultimate Version)
**''Accessories'': Base (standard), base with Shockwave (Ultimate Version)

:A statue based on Optimus Prime's appearance in the ''[[Transformers: War for Cybertron Trilogy (cartoon)|War for Cybertron Trilogy]]'' cartoon. The exclusive version includes a defeated [[Shockwave (G1)/toys#Prime 1 Studio|Shockwave]] as part of the statue's base.

:This item was canceled due to the combination of rising production costs and insufficient preorders.
{{canceledtoy}}
{{-}}

==My Busy Books==
[[File:TF-My-Busy-Books-Transformers-Optimus-Prime-figurine.jpg|upright=1.66|thumb]]
*'''Transformers: My Busy Book''' (2017)

:Included with the [[Transformers: My Busy Book|10-page board book]], 12 figurines, and a playmat, Optimus Prime is represented by a pair of small, PVC non-transforming figurines of his robot and his semi-truck alternate mode, based on his [[evergreen]] design. Like most of the land-based vehicle figurines, his wheels do not roll.

:In terms of quality control, the figurines' paint applications can be... shoddy. If you're a collector who prefers to display them, you should resign yourself from buying it or try to [[customizing|customize]] the figures with better paint applications if you have the skills.
{{-}}

==Rubik's Crew==
[[File:Rubiks Crew Optimus.jpg|upright=1.66|thumb]]
*'''Rubik's Crew Game: Transformers Optimus Prime Edition'''<ref>[https://www.hasbro.com/en-us/product/rubik-s-crew-game-transformers-optimus-prime-edition:70976F4B-5056-9047-F52F-5BB6105031BB Rubik's Crew Game: Transformers Optimus Prime at hasbro.com]</ref> (2017)
This [[super deformed]] version of [[Optimus Prime (G1)|Optimus Prime]]'s robot mode has a detachable "Puzzlehead" that functions like the [https://www.rubiks.com/store/puzzles/rubiks-2x2 2x2] [[Rubik's Cube]].
{{-}}
{{-}}
==Fidget Its==
[[File:TF-Fidget-Its-Optimus-Prime.jpg|upright=1.66|thumb|Before time began, there was...the Cube.]]
*'''Optimus Prime''' (Fidget Its, 2017)

:''Fidget Its'' Optimus Prime is a non-transforming cube-shaped figurine, built for for your fidgeting needs! His pair of eyes & his forehead can be pushed like buttons, his right arm can swivel, his rear section can be fiddled like a combination lock dial, and his left arm can be moved up, down, up, and down.

{{-}}

==Hauck==
[[File:Hauck Go Kart Optimus.jpg|upright=1.66|thumb|Everyone wants to ride Optimus.]]
*'''Optimus Prime Go Kart''' (2017)
:Manufactured by [[Hauck toys]], the Optimus Prime go-kart is a small, pedal-operated vehicle for kids aged 4-8 years old. Cast in the image of Optimus (even featuring his head sculpted on the front), the kart features an adjustable seat as well as a brake.
{{-}}

==Colorcasa==
[[File:Gen-Colorcasa Optimus Prime Spoon Fork.jpg|upright=1|thumb|Eating is the right of... yeah you know the gist.]]
*'''3D Children Tableware''' (2017)
:Chinese company Colorcasa released a pair of children-sized cutlery in the form of a cute (though angry-looking) Optimus Prime, one as a spoon and another as a fork. They were branded as ''Generations'' products.
{{-}}

==Threezero==
===Premium===
*'''Optimus Prime - Classic Edition''' (Premium Scale, 2017)
**''Accessories:'' TBA
{{charstubtoys}}
{{-}}
===DLX===
*'''''War for Cybertron Trilogy'' Optimus Prime''' (DLX Scale, 2021)
**''Accessories:'' Ion Blaster, Energon Axe, Energon Shield, 5 pairs of hands, Action Stand
{{charstubtoys}}
{{-}}

===MDLX===
[[File:Threezero-MDLX-Optimus-Prime.jpg|thumb|upright]]
*'''Optimus Prime''' (2022)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)
:[[Threezero]]'s second figure for the MDLX line, this version of Optimus Prime is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Optimus Prime is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and accessories, namely his ion blaster, energon axe and Matrix of Leadership. He comes with a suite of hands in pairs: closed fists, splayed-out relaxed hands, and three different pairs meant to specifically hold each one of the aforementioned accessories. His chest is magnetically attached and as such can store the Matrix when not in use. Optimus also comes with his backpack piece disassembled in package.

:He was redecoed into [[Nemesis Prime (G1)#Threezero|Nemesis Prime]], [[Ultra Magnus (G1)/toys#Threezero|Ultra Magnus]], as well as his [[Optimus Prime (SG)#MDLX|''Shattered Glass'' self]].

:Optimus is [https://www.threezerohk.com/wp-content/uploads/2023/05/MDLX_Transformers_Starscream_17-768x512.jpg compatible] with [[Starscream (G1)/merchandise#Threezero|Starscream]] by way of the latter's wing assembly and head, in reference to "[[Megatron's Master Plan, Part 1]]".

::*''[https://www.threezerohk.com/product/transformers-mdlx-optimus-prime/ More information on MDLX Optimus Prime at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXNewYear}}
*'''Optimus Prime (Year of the Dragon Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:An all-gold {{W|Chinese New Year}} themed redeco of the above figure, featuring dragon patterns across his chest and left arm. According to the product description from Threezero, the right shoulder features the character for "Year of the Dragon" (龍), while his left shoulder features the fifth character (辰) of "Earthly Branches" in traditional Chinese sequencing (地支). Optimus features all the same accessories and functionality as before.

:This figure was limited to 1398 pieces worldwide, revealed in late 2023 and released in February 2024.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-year-of-the-dragon-edition/ More information on MDLX Optimus Prime (Year of the Dragon Edition) at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXVintage}}
*'''Optimus Prime (Vintage Animation Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:Yet another redeco of Prime, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

:Vintage Animation Edition Prime, [[Megatron (G1)/merchandise#MDLXVintage|Megatron]] and [[Bumblebee (G1)/merchandise#MDLXVintage|Bumblebee]] were revealed in a [https://newsroom.hasbro.com/news-releases/news-release-details/40-years-one-legacy-hasbro-celebrates-transformers-40th press release] from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-vintage-animation-edition/ More information on MDLX Optimus Prime (Vintage Animation Edition) at Threezero]
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXSleep}}
*'''Optimus Prime (Sleep Mode)''' (2025)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:A redeco of Prime in various shades of grey as a callback to his death in [[The Transformers: The Movie]]. All previous accessories and functionality carry over from before.

:This figure was revealed on Threezero's official website on February 2025.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-sleep-mode// More information on MDLX Optimus Prime (Sleep Mode) at Threezero]
{{MDLXOptimusPrimeMold}}

==Kidrobot==
[[File:Kidrobot GIJoe Enamel Pin Series.jpg|thumb|250px]]
===Enamel Pin Series===
*'''Optimus Prime''' ([[November 3]], [[2017]])
:*''Rarity:'' 1 in 20
:Released by [[Kidrobot]] in their Enamel Pin Series, this is a flat, enamel pin badge of Optimus Prime inspired by the art of [[Tom Scioli]]'s ''[[Transformers vs. G.I. Joe]]'', albeit with [[Super deformed|cutesy proportions]]. The pin series was [[Blindpacking|blindboxed]], with some pins being rarer than others.
{{--}}

===Vinyl Mini Series===
[[File:Kidrobot GI Joe Optimus Prime mini.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[November 14]], [[2017]])
:*''Rarity:'' 2 in 24
:*''Accessories'': Sword
:The same character design was reused for the Vinyl Mini Series, with Optimus receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. Optimus featured articulation in each shoulder, and also included his [[Minecraft]] voxel sword as first seen in "[[Everybody Hates Metroplex]]".
{{-}}

{{anchor|kidrobotgid}}
[[File:Kidrobot GI Joe Optimus Prime GID mini.jpg|thumb|upright=1]]
*'''Optimus Prime GID''' ([[November 14]], [[2017]])
:*''Rarity:'' 1 in 48
:*''Accessories'': Sword
:Optimus's Vinyl Mini figure was redecoed into "Optimus Prime GID", sharing many of the same paint applications, but now cast entirely out of glow in the dark plastic, more closely representing his apparition to [[Scarlett]] in "[[Headmasters (issue)|Headmasters]]" or his resurrection in "[[The War Never Ends]]". He was one of the rarer, but not the rarest, of the Vinyl Mini Series. His sword is still included.
{{-}}

===Vinyl Keychain Series===
[[File:Kidrobot GI Joe Optimus Prime keychain.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[December 1]], [[2017]])
:*''Rarity:'' 3 in 24
:Optimus was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation. His sword is also absent.
{{-}}

==Bouncing Ball Heads==
[[File:BouncingBallHead OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2017)
:"Bouncing Ball Head" Optimus Prime is a small, super deformed figurine with a removable head that doubles as a bouncy ball. An Autobot logo is tampographed on the back of his head and his name is written under his feet.

:He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique red color.

:Despite clearly representing Generation 1 characters, the collection is advertised as a 2015 ''[[Transformers: Robots in Disguise (2015 franchise)|Robots in Disguise]]'' product.
{{-}}

==Imaginarium Art==
[[File:ImaginariumOptimusPrime.jpg|upright=1.66|thumb|Brings new meaning to "no matter the cost."]]
*'''Optimus Prime''' (2017)

:[[Imaginarium Art]]'s first statue of Optimus Prime stands 24 inches tall and features multiple [[Light-emitting diode|LED]]s, two varieties of his laser rifle, and his energy axe. The statue's chestplate can open, revealing the Matrix of Leadership.

:The sculpted base for this figure also features the Combat Deck and Roller. Only 500 of this item were produced.
{{-}}

*'''Optimus Prime''' (2018)

:The "Legacy of Cybertron" statue is 12 inches tall, and its base can be connected to other statues in that series to produce a larger battle scene. 600 were produced.
{{-}}

==''Keshi Surprise''==
*'''Autobots''' (2018)

:The ''[[Keshi Surprise]]'' series by [[Super7]] consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980s [[Decoy (G1)|Decoy]]s. These [[blindpacking|blind-packed]] figures were sold individually or in cases depicting only their faction. Optimus Prime was available in red, yellow, blue, and purple, and included a foil trading card / sticker.
{{-}}
==Forever Clever==
{{anchor|Jumbochalk}}
*'''4 Pack Jumbo Chalk Set''' (2018)
:Released by [[Forever Clever]], the 4 Pack Jumbo Chalk Set includes a chalk holder featuring Optimus Prime. He's bundled with chalk holders of [[Megatron (G1)/merchandise#Jumbochalk|Megatron]], [[Bumblebee (G1)/merchandise#Jumbochalk|Bumblebee]] and [[Soundwave (G1)/merchandise#Jumbochalk|Soundwave]], and 4 pieces of appropriately colored chalk.
{{anchor|shapechalk}}
*'''5 Pack Shaped Chalk''' (2019)
:A piece of blue chalk formed into the shape of Optimus Prime. Bundled with [[Megatron (G1)/merchandise#shapechalk|Megatron]], [[Bumblebee (G1)/merchandise#shapechalk|Bumblebee]], [[Starscream (G1)/merchandise#shapechalk|Starscream]] and [[Windblade (G1)#shapechalk|Windblade]].
{{anchor|WallWalker}}
*'''Wall Walkers Optimus Prime''' (2018)
:Exclusively released in [[Blindpacking|blind bags]], ''Wall Walkers'' Optimus Prime has suction cups on its hands and feet so it can stick to walls. All its details are printed on, and besides its colors and printing, it is identical to the other Wall Walkers toys.
{{anchor|MiniWalker}}
[[File:MysteryMiniWalkers.jpg|upright=1|thumb]]
*'''Mystery Mini Walkers Optimus Prime''' (2021)
:Also a blind bag exclusive, ''Mystery Mini Walkers'' Optimus Prime is an eraser-like figure with movable arms and legs and printed-on details.
{{-}}
{{anchor|PBRoptimus}}
[[File:TF Authentics 2023 Pull-Back Racers Optimus Prime.jpg|upright=1|thumb|Up top!]]
*'''Pull-Back Racers Optimus Prime''' ([[2023]])
:This toy is a non-transforming rendition of Optimus Prime in a super-deformed rendition of his vehicle mode, albeit with his robot mode head and left arm sticking out of it. As the title suggests, this toy has a pull-back motor that will propel the toy forwards after being pulled back considerably enough.
{{-}}
{{anchor|ClipCharms}}
[[File:ForeverCleverClipCharms.jpg|upright=1|thumb]]
*'''Clip Charms Optimus Prime''' (2024)
:Released in blind bags, ''Clip Charms'' features a keychain of Optimus Prime's face with his name written beside it.
{{-}}
{{anchor|KeyBlasters}}
*'''Key Blasters''' (2024)
:A toy car released as part of the ''Key Blasters'' series prominently features Optimus Prime on its side and hood, with his name written on top in [[Alphabet#Autobot_script|Ancient Autobot]] script. A key is included. When it is inserted into the car, pushing the button on the key will propel the car forward. It was sold in a two-pack with a [[Starscream (G1)/merchandise#KeyBlasters|Starscream]] themed car.

===Squeezelings===
*'''Optimus Prime''' (Series 1, 2022)
:''[[Squeezelings]]'' Optimus Prime is a [[super deformed]], non-posable figure made of soft plastic and holding his ion blaster, released by [[Forever Clever]]. He was released in [[blindpacking|blind bags]] and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

{{-}}{{anchor|SqueezelingsBlackout}}
*'''Blackout Color Mode Optimus Prime''' (2022)
:A [[black redeco]] of the previous Optimus Prime figure. It was exclusive to an 8-figure gift set, featuring [[Optimus Prime (G1)/merchandise#Squeezelings|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings|Bumblebee]], [[Starscream (G1)/merchandise#Squeezelings|Starscream]], [[Megatron (G1)/merchandise#Squeezelings|Megatron]], and Blackout Color Mode versions of the three other characters.

{{-}}{{anchor|Squeezelings2}}
*'''Optimus Prime''' (Series 2, 2023)

:A figure of Optimus Prime in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongside [[Bumblebee (G1)/merchandise#Squeezelings2|Bumblebee]], [[Megatron (G1)/merchandise#Squeezelings2|Megatron]] and [[Optimus Primal (BW)/toys#Squeezelings|Optimus Primal]], in blind bags, or on blister card individually. It was later rereleased as part of the Squeezelings Sidekicks line, bundled with a comic book.

==''Transformers Trading Card Game''==
[[File:W1SOptimusPrimeAL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Autobot Leader''' (2018)
**'''Wave 1S: Starter Set'''
**''Rarity: '''''RT'''
**''Card Number: '''''T03/T04'''
**''Stars: ''7
:Optimus Prime, Autobot Leader is one of four double-sided character cards available in the ''[[Transformers Trading Card Game]]'' Starter Set.

:The artwork for the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile card game.
{{-}}
[[File:W1OptimusPrimeBL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2018)
**'''Wave 1'''
**''Rarity: '''''RT'''
**''Card Number: '''''T29/T40'''
**''Stars: ''13
:Optimus Prime, Battlefield Legend is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The card's Bot Mode line-art was done by [[Guido Guidi]], and Alt Mode line-art by [[Marcelo Matere]] and Alt Mode colors by [[Sara Pitre-Durocher]].

{{-}}
[[File:W1OptimusPrimeFF.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Freedom Fighter''' (2018)
**'''Wave 1'''
**''Rarity: '''''CT'''
**''Card Number: '''''T30/T40'''
**''Stars: ''12
:Optimus Prime, Freedom Fighter is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The Alt Mode artwork on the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile game, while the Bot-mode features line-art by [[Marcelo Matere]] and colors by [[Sara Pitre-Durocher]].
{{-}}
[[File:W2OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Gleaming Commander''' (2019)
**'''Wave 2: Rise of the Combiners'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''11

:Optimus Prime, Gleaming Commander was released as part of the ''[[Transformers Trading Card Game]]'' Wave 2: Rise of the Combiners. Like all other members of [[combiner]] teams released in the set, This version of Optimus Prime is a folding card, with the Bot and Alt modes being depicted when the card is folded in half, and a holofoil portion of the the combined mode depicted when unfolded. The reverse of Optimus Prime, Gleaming Commander depicts the center right portion of [[Optimus Maximus (G1)|Optimus Maximus']], of whom Optimus Prime forms the torso and head.

:The artwork for Bot Mode is reused from the [[Combiner Wars (franchise)|Combiner Wars]] Battle Core Optimus Prime toy's packaging art.

:Optimus Prime, Gleaming Commander can be used to form Optimus Maximus, Ultimate Defender with the use of the Action card [[Enigma of Combination|Sentinel Enigma]] while he and the other Wave 2 Sentinels are in Bot mode on the battlefield and/or KO area.
{{-}}
[[File:W3GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Infantry-Leader''' (2019)
**'''Wave 3: War for Cybertron: Siege I'''
**''Rarity: '''''RT'''
**''Card Number: '''''T07/T48'''
**''Stars: ''11
:General Optimus Prime, Infantry-Leader is one of forty-eight double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege I.

:The card's artwork is based on the ''[[War for Cybertron: Siege|Siege]]'' Voyager-class Optimus Prime toy, with the Bot Mode artwork being reused from the toy's packaging art.
{{-}}
[[File:W4GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Galactic Commander''' (2019)
**'''Wave 4: War for Cybertron: Siege II'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T06/T52'''
**''Stars: ''15

:General Optimus Prime, Galactic Commander is one of fifty-two double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege II.

:The card's artwork is based on the ''Siege'' Leader-class Galaxy Upgrade Optimus Prime toy, which in turn is based on the ''[[Transformers: Cybertron (franchise)|Cybertron]]'' version of Optimus Prime. The Bot Mode artwork is reused from said toy's packaging art, while Alt Mode received new art (lines by [[Marcelo Matere]] and colors by [[Volta]]).
{{-}}
[[File:EEOptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2019)
**'''Wave 1: Energon Edition'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T205/T06'''
**''Stars: ''13

:Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Optimus Prime, Battlefield Legend. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art by [[Marcelo Matere]]
{{-}}
[[File:W5OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Legendary Warrior''' (2020)
**'''Wave 5: Titan Masters Attack'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''12

:Optimus Prime, Legendary Warrior is one of forty-six double sided character cards released as part of Wave 5 of the ''[[Transformers Trading Card Game]]'', Titans Masters Attack. As a character with a body mode, Optimus Prime begins the game with a Titan Master attached in head mode. Once Optimus Prime is KO'd, said Titan Master is deployed.

:The card's artwork is based on the ''Titans Return'' Leader-class Powermaster Optimus Prime toy, with the body mode artwork being reused from the toy's packaging art.

:This card's set was originally set for an April 2020 release, however due to the global COVID-19 pandemic the release was pushed back to May 29, 2020.
{{-}}

==''Magic: The Gathering''==
[[File:MTG-Optimus-Inspiring-Leader.jpg|thumb|upright=1.66|Go ahead, turn me to my other face, see the rules nightmare that happens.]]
*'''Optimus Prime, Inspiring Leader''' (2018)
**''ID number:'' '''002/004'''
**''Set code:'' '''H18'''
**''Color identity:'' '''Red/White'''
**''Casting cost:'' '''{3}{R}{W}'''
**''Artist:'' [[Steve Argyle]]
:Part of the ''[[mtg:Heroes of the Realm|Heroes of the Realm]]'' series of commemorative cards, made by Wizards of the Coast for their employees as rewards for work on specific projects,<ref>[https://www.youtube.com/watch?v=4WNBRWoHq9E Gavin Verhey from Wizards of the Coast explains Heroes of the Realm]</ref> the 2018 "Optimus Prime, Inspiring Leader" card was given to the team behind the ''[[Transformers Trading Card Game]]''. Uniquely, Optimus Prime is "triple-faced" card: a ''Magic'' card on the front side, a ''Transformers Trading Card Game'' card representing Optimus in his alternate mode on the opposite side, and an oversized ''Transformers Trading Card Game'' card representing Optimus in robot mode found by unfolding the card.
:Optimus has the ability to change any permanent (card on the battlefield) to its other face, though sadly that doesn't mean he could convert ''himself'' into a ''Transformers Trading Card Game'' card during a ''Magic: The Gathering'' game.<ref>[https://www.reddit.com/r/magicTCG/comments/e5ovx5/heroes_of_the_realm_promo_optimus_prime_inspiring/ Post by u/Wizards_Drew] on [https://www.reddit.com/r/magicTCG/ r/magicTCG] on Reddit</ref>
:As with all ''Heroes of the Realm'' cards, "Optimus Prime, Inspiring Leader" is not legal to play in any format beyond a specific Commander rule; the cards are novelties designed to be read, rather than played.<ref>[https://markrosewater.tumblr.com/post/189543247703/hi-mark-i-have-2-questions-1-what-are-the Mark Rosewater on Tumblr]: "There’s no plans to release the Heroes of the Realm. The cards aren’t designed to be played. They’re designed to be read."</ref>
{{-}}
{{anchor|MTGHero}}
[[File:MTG-Optimus-Prime.jpg|thumb|upright=1.66|Transform and tap out!]]
*'''Optimus Prime, Hero / Optimus Prime, Autobot Leader''' (2022)
**''ID number:'' '''013/015'''
**''Set code:'' '''BOT'''
**''Color identity:'' '''Blue/Red/White'''
**''Casting cost:'' '''{3}{U}{R}{W}''' (front), '''{2}{R}{W}{B}''' (back with "More Than Meets the Eye")

:"Optimus Prime, Hero" is part of the 2022 ''[[Magic: The Gathering]]'' ''[[mtg:Universes Beyond|Universes Beyond]]'' ''[[mtg:Transformers|Transformers]]'' card set, found in Set Booster and Collector Booster packs of ''Magic''<nowiki>'s</nowiki> ''[[mtg:The Brothers' War|The Brothers' War]]'' set. It can be reversed to become "Optimus Prime, Autobot Leader", representing Optimus in vehicle mode. True to his character, he supports his allies with the "Bolster" mechanic and can return to the battlefield should he [[The many deaths of Optimus Prime|die]] in his Artifact Creature form.
:A variant of this card was available solely in Collector Booster packs, depicting [[Optimus Prime (SG)#Magic: The Gathering|''Shattered Glass'' Optimus Prime]].
{{-}}
{{anchor|MTGSLD}}
[[File:MTG-SLD-Optimus.jpg|thumb|upright=1.66|[[w:Golem|On sale just in time for Hanukkah]].]]
*'''Optimus Prime''' ''(Darksteel Colossus)'' (2022)
**''ID number:'' '''1081'''
**''Set code:'' '''SLD'''
**''Color identity:'' '''Colorless'''
**''Casting cost:'' '''{11}'''

:"Optimus Prime" is part of the ''[[Magic: The Gathering]]'' card pack ''Transformers: Optimus Prime vs. Megatron'', part of the ''[[mtg:Secret Lair|Secret Lair Drop Series]]'' ''[[mtg:Secret Lair Drop Series: December Superdrop 2022|December Superdrop 2022]]'' set. It was available exclusively from [https://secretlair.wizards.com secretlair.wizards.com] from [[December 5]], [[2022]] through [[January 6]], [[2023]].
:Optimus Prime is a [[mtg:Skinned card|reskin]] of the existing ''Magic'' card [https://scryfall.com/card/dst/109/darksteel-colossus Darksteel Colossus], using the same rules and counting as it for all gameplay purposes. Befitting the mighty leader of the Autobots, Optimus is incredibly powerful and impossible to destroy normally, but consequently has a very high casting cost. While the card has printing on both faces, depicting Optimus in robot mode and vehicle mode respectively, both have the same printed abilities and count as a single card for rules purposes—just choose which side you want to display when he enters the battlefield.
: The ''Optimus Prime vs. Megatron'' set also includes [[Megatron (G1)/merchandise#MTGSLD|Megatron]], [[AllSpark#Magic: The Gathering|The AllSpark]], and the bonus card [[Cybertron (planet)|Cybertron]].

{{--}}

==Flame Toys==

===Kuro Kara Kuri===
[[File:FlameToys-KuroKaraKuri-04-OptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (December 2019)
**''Number:'' '''04'''
**''Accessories:'' Large sword, stone, Swords (2), Large axe, Small axe (2), Ion cannon, pairs of hands (5), additional faces (2), Big Turbo Jet Axe with set of hands (exclusive),
**''Sculptor'': Chemical Attack
**''Painting'': Decomas Lab (Hiroyuki Hirose]

:Part of [[Flame Toys]]' ''Kuro Kara Kuri'' line of high-end, non-transforming action figures, Optimus Prime is an original design, though one that bears many similarities to the Don Figueroa design from [[IDW Publishing|IDW's]] ''The Transformers'' vol. 1. He has lots of die cast and LEDs in his head, chest matrix chamber, and both knees. He comes with a multitude of accessories, including a very large sword that can be plugged into a stone, two smaller swords resembling handheld versions of those used by the [[Optimus Prime (Movie)|live-action movie Optimus Prime]], a pair of hatchets resembling those of [[Optimus Prime (Animated)|''Animated'' Optimus Prime]], and of course G1 Optimus Prime's iconic Ion cannon. He also comes with an Orion Pax visorless alternative face, a battle damaged addition face, and five alternative pairs of hands in different poses.
:If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a very large Turbo Jet Axe.
:The reissue (which is labelled as such on the box) uses a slightly different red paint and is the recommended release for use with the Jet Power Armor (see below) due to the paint's extra durability.

{{-}}{{anchor|FlameToysBlackJetPower}}
[[File:FlameToys-KuroKaraKuri-OptimusPrimeJetPowerArmor.jpg|upright=1.66|thumb|And you thought the previous figure was expensive...]]

*'''Optimus Prime Jet Power Armor''' (January [[2024]])
**''Number:'' '''13'''
**''Accessories:'' ''everything...'', Blaster Cannon (exclusive)
**''Sculptor'': Chemical Attack
**''Coloring'': Masashi Watanabe

:Optimus Prime Jet Power Armor is a collection of 23 armour pieces that combine with the previously released ''Kuro Kara Kuri'' Optimus Prime similar to how he combined with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]'' which doubles the size of the figure. If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a blaster cannon.
:As mentioned above, due to addition paint durability, it is recommended to use the re-release of Optimus Prime.

{{-}}

===Furai Model===
[[File:FlameToys-FuraiModel-01-OptimusPrimeAttackMode.jpg|upright=1.66|thumb|'''''X-treme!''''']]
*'''Optimus Prime (Attack Mode)''' (September 2018)
**''Number:'' '''01'''
**''Accessories:'' Ion cannon, axe, 4 hands
{{toydesigner|[[Akira Amemiya]] (concept artist)}}

:Released as part of the ''Furai Model'' line by [[Flame Toys]], "Optimus Prime (Attack Mode)" is an articulated, non-transforming, Voyager Class-sized {{w|Gunpla}}-style model kit. Using parts made of hard ABS plastic and some polycaps, Optimus Prime (Attack Mode) is an original design created by Flame Toys in collaboration with [[Akira Amemiya]] of [[Studio Trigger]].

:For straight-assembly builders, Optimus Prime features a sheet of foil stickers for detail (notably the shoulder insignias), though the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers like ''Gundam Markers'' can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.

:This model kit was later [[redeco]]ed as [[Nemesis Prime (G1)#Flame Toys|Nemesis Prime (Attack Mode)]] and [[Optimus Prime (SG)#Flame Toys|Shattered Glass Optimus Prime (Attack Mode)]].

{{-}}{{anchor|Furai03}}
[[File:FlameToys-FuraiModel-03-OptimusPrimeIDW.jpg|upright=1.66|thumb]]
*'''Optimus Prime (IDW ver.)''' (March 2019)
**''Number:'' '''03'''
**''Accessories:'' Ion cannon, 4 hands
:Optimus Prime (IDW) is a plastic model kit based off of the Optimus Prime design created by [[Don Figueroa]] for [[IDW Publishing]]'s [[The Transformers (IDW)|2009-2011 ''The Transformers'' comic series]]. Similarly to the previous model kit, IDW Optimus is also Voyager-sized.
:This model kit was later redecoed as [[Nemesis Prime (G1)#Furai08|Nemesis Prime (IDW ver.)]] and [[Ultra Magnus (G1)/merchandise#Flame Toys|Ultra Magnus (IDW ver.)]], and it's also used to make the pre-built Furai Action figure (see below.)

{{-}}{{anchor|Furai12}}
[[File:FuraiG1Optimus.jpg|upright=1.66|thumb]]
*'''Optimus Prime (G1 ver.)''' (April 2020)
**''Number:'' '''12'''
**''Accessories:'' Ion cannon, 10 hands, axe
:Optimus Prime (G1) is another plastic model kit, this time a heavily stylized rendition of his cartoon appearance. Like the previous releases, he stands at an approximate Voyager height. He features opening chest windows which reveal sculpted detail of the [[Matrix of Leadership]].

{{-}}{{anchor|Furai16}}
*'''Optimus Prime IDW (Clear ver.)''' (August 2020)
**''Number:'' '''16'''
{{toystub}}

{{-}}
*'''Optimus Prime''' (20??)
:Part of the ''"Deformer Model Kit"'' subline of the ''Furai Model'' line, this Optimus Prime model is a cutesy, "[[super deformed]]" take on the Autobot leader.
{{comingsoontoy}}

===Furai Action===
[[File:FlameToys-FuraiAction-OptimusPrimeIDW.jpg|thumb|Just like one of those second-hand pre-built Gunplas you've seen in Akibahara!]]
*'''Optimus Prime (IDW ver.)''' (January 2020)
**''Accessories'': Ion cannon, 4 hands

:''Furai Action'' Optimus Prime is a pre-assembled redeco of the second ''Furai Model'' kit, with the weathering effects painted on.

{{-}}

==''Playskool Friends''==
[[File:Playskool-Friends-TF-Optimus-Prime.jpg|upright=1.88|thumb|A mouth on his mouthplate? That's a new one.]]
*'''Transformers Collector Pack''' (Canceled)

:Intended to be released as part of the 7-pack for the Playskool Friends lineup, this Optimus Prime is a very adorable non-transforming figurine. He was to come packed with Bumblebee, Arcee, and 4 Rescue Bots: Heatwave, Chase, Boulder and Blades.

:Given the inclusion of the four Rescue Bots, it was ''probably'' unclear if this Optimus Prime is meant to represent his ''Generation 1'' counterpart or his ''[[Optimus Prime (WFC)|Aligned]]'' counterpart.

{{canceledtoy}}

{{-}}

==''Uglydolls''==
[[File:Uglydolls plush collab.jpg|250px|thumb]]
*'''Ox as Optimus Prime''' (2018)
:A collaboration with ''[[Uglydolls]]'' for the 2018 San Diego Comic-Con, the character Ox is dressed as Optimus Prime. He is a limited run exclusive plush, along with Ice-Bat as [[Bumblebee (G1)/merchandise|Bumblebee]].
{{--}}

==McDonald's==
[[File:2018-McD-Authentics-Bumblebee-Optimus-Prime.jpg|250px|thumb]]
*'''Optimus Prime with a sword'''{{sic}} (Happy Meal Toy, 2018)
:Released as part of the [[McDonald's]] June 2018 Happy Meal Toys along with [[My Little Pony]], this Optimus Prime is a super-deformed figurine, and he features a gimmick on his left arm, which can be swung down to reveal a pop-out sword with the press of a button on his back. The sword can be retracted manually by raising the arm.

:The toy was available in South Korea, Italy, Russia, and Malaysia. This toy was rereleased in the US as [[Optimus Prime (Movie)/merchandise#McDonald's 2|Optimus Prime]] for the ''[[Bumblebee (franchise)|Bumblebee]]'' promotion. In Malaysia, this toy is one of the few items that can be found in several hobby toy shops.

{{-}}

==Jada Toys==
===''Metals Die Cast / Hollywood Rides''===
[[File:JadaHollywoodRidesG1OptimusPrime1-24.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2018)
:Released by [[Jada Toys]], this 1/24 scaled non-transforming die-cast truck with rubber tires is based on Optimus Prime's original form and features opening doors to reveal a highly detailed interior with a chromed steering wheel. Similar to the ''[[Robot Powered Machines#Mini-Vehicles|Robot Powered Machines]]'', the truck features a sculpted robot mode underneath. His smokestacks are ''insanely'' long.

:This mold was later redecoed as [[Nemesis Prime (G1)#Jada Toys|Nemesis Prime]].

{{-}}{{anchor|Jada1-32}}
[[File:JadaHollywoodRidesG1OptimusPrime1-32.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2018)
:A medium-sized replica of Optimus Prime much similar to the version above, but with shortened smokestacks. Unlike most other 1/32 vehicles, Optimus does not feature any opening doors, but still retains the sculpted robot mode on his chassis.

{{-}}{{anchor|JadaOP3pack}}
[[File:Jada 1-32 Optimus Prime 3pk.jpg|upright=1.44|thumb]]
*'''Western Star 5700XE Optimus Prime / Optimus Prime / Autobot Optimus Prime''' (Scale 1/32 Die Cast Vehicle 3‑pack, 2022)
:The 1/32 version of Generation 1 Optimus Prime was rereleased in a 3-pack alongside his [[Optimus Prime (Movie)/merchandise#JadaOP3pack|2007 and ''The Last Knight'']] counterparts, neither featuring any notable changes.

{{-}}{{anchor|JadaGhost124}}
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2024)
:A redeco of the 1/24 scaled replica above, this Optimus Prime was released in a crossover with the ''[[Ghostbusters]]'' franchise and is mostly based on the [[Optimus Prime (G1)/Generations toys#Collaborative|MP-10G Optimus Prime Ecto-35 Edition]] figure from the ''[[Transformers Collaborative|Collaborative]]'' toyline, itself based on the original [[Ecto-1]] color scheme, with the addition of some green ghost splatter between the front bumper and the left wheel. Instead of Autobot insignias, this version features the Ghostbusters logo on both sides and the back of the cab, as well as under the chassis right above his robot mode sculpture.

{{-}}{{anchor|JadaGhost132}}
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2024)
:This version of Optimus Prime is a redeco of the 1/32 scaled replica in the same Ghostbusters-inspired deco of the 1/24 version above. The only noticeable difference in colors is the lack of green on its headlights.

===''Metalfigs''===
[[File:JadaMetalfigsG1OptimusPrime.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (4" Die Cast Figure, 2020)
**''Accessories'': Ion blaster, Energon-axe
:''Metalfigs'' Optimus Prime is a 4-inch tall non-transforming super deformed die-cast figure with three points of articulation and light-up eyes.

:He comes with his signature ion blaster and Energon-axe weapons as accessories.

{{-}}{{anchor|DioramaScene}}
[[File:JadaMetalfigsG1DioramaScene.jpg|upright=1.44|thumb]]
*'''Diorama Scene''' (2 3/4" Die Cast Figure 4-pack, 2020)
**''Accessories'': Display backdrop
:A static die-cast figurine of Optimus Prime measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongside [[Bumblebee (G1)/merchandise#DioramaScene|Bumblebee]], [[Starscream (G1)/merchandise#Jada Toys|Starscream]] and [[Megatron (G1)/merchandise#Jada Toys|Megatron]].

:The packaging backdrop can be used as an additional display piece for the set.

{{-}}{{anchor|Metalfigs4pack}}
*'''Optimus Prime / Bumblebee / Optimus Primal / Megatron''' (2 3/4" Die Cast Figure 4-pack, 2022)
:This static Optimus Prime figurine is directly designed after the 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongside [[Bumblebee (G1)/merchandise#Metalfigs4pack|Bumblebee]], [[Optimus Primal (BW)/toys#Metalfigs|Optimus Primal]] and [[Megatron (G1)/merchandise#Metalfigs4pack|Megatron]].

{{-}}{{anchor|Metalfigssingle}}
*'''Optimus Prime''' (2 3/4" Die Cast Figure, 2023)
:The same super deformed Optimus Prime from the 4-pack above is also available in individual packaging.
{{-}}

===''Nano Hollywood Rides''===
[[File:JadaNanoHollywoodRidesG13pack.jpg|upright=1.44|thumb]]
*'''Starscream / Volkswagen Beetle Bumblebee / Optimus Prime''' (1.65" Die Cast Vehicle 3-pack, 2020)
:''Nano Hollywood Rides'' Optimus Prime is a small non-transforming die-cast truck measuring approximately 1.65 inches long. He was released in a 3-pack alongside [[Starscream (G1)/merchandise#Nano Hollywood Rides|Starscream]] and [[Bumblebee (G1)/merchandise#Nano Hollywood Rides|Bumblebee]]. Unfortunately, he doesn't feature a sculpted robot mode underneath like most other Jada vehicles do.
{{-}}

===''Nano Metalfigs''===
[[File:JadaNanoMetalfigsG1-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 1 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:''Nano Metalfigs'' Series 1 Optimus Prime is an incredibly small die-cast figurine molded holding his blaster. He has a little base attached to his feet for balancing reasons.

:He comes in an impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]]. This mold was later redecoed as [[Nemesis Prime (G1)#Nano Metalfigs|Nemesis Prime]] in the Series 2 18-pack.

{{-}}{{anchor|NanoMetalfigs2}}
[[File:JadaNanoMetalfigsSeries2G1BW-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 2 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:A second ''Nano Metalfigs'' Optimus Prime was released in Series 2, now wielding his Energon axe instead of his blaster and doing a bit more of an action pose.

:He comes in ''another'' impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{-}}{{anchor|NanoMetalfigs3}}
*'''Transformers Series 3 18-pack''' (4 cm Die Cast Figure Multipack, 2023)
:For the [[Jada Toys#Nano Metalfigs|third ''Nano Metalfigs'' multipack]], two Optimus Primes were made available at once. One is a re-release of the axe-wielding Series 2 figurine with no noticeable changes, and the other is a golden redeco of the blaster-holding Series 1 figurine.
{{-}}

===Converting RC Vehicle===
[[File:JadaConvertingOptimusPrime.jpg|upright=1.44|thumb|"We have [[Optimus Prime (G1)/toys#Robosen Collector's Edition|Robosen's Optimus Prime]] at home."]]
*'''Optimus Prime Converting R/C''' (2022)
**''Accessories:'' Remote controller
:This Optimus Prime is a remote controlled figure capable of automatically converting between robot mode and truck mode on command.

:He measures approximately 13 inches tall in robot mode and 12 inches long in truck mode, and features lights, sounds and voices.

{{--}}

==''ReAction''==
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2020, 2024)}}</ul>
:*''Accessories'': Ion Blaster

: Released in [[Super7]]'s line of multi-property 3.75-inch action figures, ''[[Super7#ReAction|ReAction]]'' Optimus Prime was naturally part of the first wave of ''Transformers'' figures. It is a non-converting action figure with 5 points of articulation (simple swivel shoulders, legs, and neck) and an [[Ion blaster]] accessory he can only hold in his right hand.

: It should be noted that despite being a "retro-styled" figure, the hard-plastic points on his helmet are very accurate to the animation model and therefore ''incredibly'' pointy, like, "would not be allowed on a toy for the 5-13 set" pointy.

: As with all releases in the ''ReAction'' toyline, Optimus comes packaged in a small cardback that emulates the nostalgic packaging style of [[Kenner]] ''[[Star Wars (franchise)|Star Wars]]'' action figures of the late 1970s to early '80s.

: In late 2024, this figure was reissued with no obvious changes, now in a [[blindpacking|blindpacked]] box assortment.

{{-}}{{anchor|ReActionCyberchrome}}
<ul class="iconlist">{{Bp-a1|'''Cyberchrome Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: This version of the Optimus ''ReAction'' figure features glossy metallic paint. That's about it. Whee.

: This figure was a [[Target]] exclusive in the US, released alongside the "[[Megatron (G1)/merchandise#ReActionCyberchrome|Cyberchrome Megatron]]" figure.

{{-}}{{anchor|ReActionFallenWave4}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: Released in the fourth wave of ''ReAction'', this all-gray version of Optimus features a new torso tooling with open chest panels revealing a (non-removable) Matrix of Leadership.

: This is the first of ''three'' different figures of the same concept to be sold under the name "Fallen Leader Optimus Prime"; the other two (below) are [[Target]] exclusives.

: This figure was initially solicited to retailers as "Dead Optimus Prime" before the slightly gentler name change... but "Dead Optimus Prime" is still what the figure is labeled on the cardback checklist as of wave 6.

{{-}}{{anchor|ReActionSanta}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Christmas]]-themed redeco, "Optimus Santa" features a red and green color scheme, a tufted Santa cap, and his ion blaster is striped to resemble a candy cane.

: This figure is a "shared exclusive" between, multiple online outlets. The card still refers to him as just "Optimus Prime" (albeit in cursive on a gift tag), but the toy is listed as "Optimus Santa" on Super7's website, and "Optimus Prime Santa" on other sites.

{{-}}{{anchor|ReActionFallenTarget}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: This Target-exclusive version of the "Fallen Leader" concept is just the normal Optimus figure with the closed-up chest done in the grays of the initial "Fallen Leader" figure. Exciting! And clearance fodder!

: This figure was released alongside the "[[Megatron (G1)/merchandise#ReActionChromeCommander|Chrome Commander Megatron]]" figure.

{{-}}{{anchor|ReActionGolden}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The third [[Target]]-exclusive Optimus Prime figure, this one has a head-to-toe gold redeco, depicting his appearance in the end of "[[The Golden Lagoon (episode)|The Golden Lagoon]]".

: This figure was released alongside the similarly-decoed [[Megatron (G1)/merchandise#ReActionGolden|"Golden Lagoon" Megatron]] figure.

{{-}}{{anchor|ReActionFallenTargetColor}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The second Target-exclusive "Fallen Leader" version of Optimus, and the third "Fallen Leader" overall (kinda morbid, y'all), and ''fourth'' Target-exclusive Optimus (overkill much?), this is the open-chest version of Optimus in his normal "living" color scheme, now better depicting the Matrix transfer moment when Prime was still (barely) alive.

: This figure was released alongside the thematically-similar [[Megatron (G1)/merchandise#ReActionFallenEvolution|"Fallen Evolution" Megatron]] figure.

{{-}}{{anchor|ReActionOpHalloween}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Halloween]]-themed redeco of the standard Optimus figure, in orange and black. Pumpkinmus Prime.

: This figure was a "shared exclusive", sold through multiple online retailers. Online listings call it "Optimus Prime (Halloween)", but the actual card simply says "Optimus Prime".

<ul class="iconlist">{{Bp-a1|'''Nucleon Quest Optimus Prime''' (2024)}}</ul>
:*''Accessories'': Ion blaster

: Wave eight of ''ReAction'' saw this black redeco of Optimus Prime, inspired by the 2001 [[Optimus Prime (G1)/toys#NucleonQuest|Nucleon Quest Super Convoy]] figure.

{{-}}

*'''Ark Base''' (Playset, 2024)

:*''Accessories'': Ion blaster

: The ''ReAction'' Ark Base playset included a version of Optimus Prime with his chest windows painted to add simulated reflective detail.
{{comingsoontoy}}
{{-}}

==''R.E.D. [Robot Enhanced Design]''==
[[File:TF-R.E.D.-Optimus-Prime.jpg|upright=1.66|thumb|Armored Convoy not included.]]
*'''Optimus Prime''' (2020)
**''Accessories'': Ion Blaster, Energon Axe, [[Matrix of Leadership/toys#R.E.D. .5BRobot Enhanced Design.5D|Matrix of Leadership]], 4 alternate hands
{{toydesigner|[[Emiliano Santalucia]] (concept artist)}}

:Released as part of the first wave of the ''[[Transformers R.E.D.]]'' line, Optimus Prime is a non-transforming 6-inch action figure akin to the ones from Hasbro's ''[[Marvel Comics|Marvel]] Legends'' and ''[[Star Wars (franchise)|Star Wars]] The Black Series'' lines. He is highly articulated and features extensive paint operations for [[show-accuracy]].

:Optimus comes with six hands altogether: a pair of closed fists, a pair of gently beckoning hands, a right hand for his included [[Ion blaster|Ion Blaster]] accessory, and a right hand with the index finger extended. He also features an [[Energon-axe|Energon Axe]], compatible with either wrist in place of his hand. Lastly, he includes a Matrix of Leadership, which can store in his chest thanks to his opening windows.

:As with all ''R.E.D.'' toys, Optimus Prime was a Walmart exclusive in Canada and the United States, and was later made available on [[Hasbro Pulse]] in limited quantities.

: This mold was used to make ''R.E.D.'' [[Ultra Magnus (G1)/merchandise#R.E.D. .5BRobot Enhanced Design.5D|Ultra Magnus]].
{{-}}

==''Super Cyborg''==
[[File:SuperCyborgOptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (2018)
**''Accessories'': Ion blaster, torso plate

:''Super Cyborg'' Optimus Prime is an 11-inch-tall non-transforming figure with 7 points of articulation. Its main distinguishing feature is that the entire front of the robot torso is removable, exposing not just the expected Matrix of Leadership but also many other sculpted mechanical details within Prime's body.

*'''Optimus Prime (clear)''' (2018)
**''Accessories'': Ion blaster, torso plate

:The transparent plastic version of this figure was exclusive to [[San Diego Comic-Con]] 2018.

*'''Optimus Prime (Dead)''' (2018)
**''Accessories'': Ion blaster, torso plate

:This dark grey version was exclusive to [[New York Comic Con]] 2018.

*'''Optimus Prime (Clear Red / Blue)''' (2023)
**''Accessories'': Ion blaster, torso plate

:This translucent version was exclusive to New York Comic Con 2023.
{{-}}

==Figural Bag Clip==
[[File:FiguralBagClip OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2020)
:Released by [[Monogram]], this 2.5" 3D foam bag clip takes the form of a chibi Optimus Prime.

:It was available only as part of a [[Blindpacking|mystery blind bag]] collection.
{{-}}
[[File:FiguralBagClip 2021 Optimus.JPG|thumb]]
*'''Optimus Prime''' (2021)
:A non-articulated, non-transforming 3" figure of Optimus Prime with an attached clip, also released by Monogram.

:Unlike the previous year's release it was sold on a standard cardback.

{{-}}

==D'elicce==
{{note|All Easter eggs listed below were exclusive to Lojas Americanas, a popular Brazilian chain store.}}
[[File:Brazilian Transformers Easter Eggs 2021.jpg|250px|thumb]]
*'''Transformers Easter egg''' (90g, 2021)
:In 2021, [[Brazil]]ian chocolate manufacturer Top Cau, under its kid-focused branch D'elicce, released a pair of ''Transformers''-themed [[Easter]] eggs that included a popcorn bucket of [[super deformed|cutesy proportions]] based on either Optimus Prime or Bumblebee.

{{-}}{{anchor|delicce2025}}
[[File:Brazilian Optimus Prime Easter Egg 2025.jpg|thumb|250px]]
*'''''Transformers'' Easter egg''' (90g, 2025)
:In 2025, D'elicce (or rather "Delice" as its spelled in some parts of this product) released an Optimus Prime-themed egg that came with a single piece of red plastic molded after the character's evergreen truck mode with trailer attached, inside of which the egg comes stored. Unfortunately, it means that not even his wheels can roll.

:The toy comes with a stickersheet that must be applied manually and is not packaged with pre-applied stickers as shown in the official stock photos.

{{-}}

==''Minimates''==
*'''Optimus Prime''' (Series 1, 2021)
**''Accessories'': Laser rifle, energy axe, stand

:Part of the first wave of Transformers [[Minimates]] from Diamond Select, this Optimus Prime is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. The Matrix of Leadership is printed on the Minimate figure's chest and is visible through the windows on the chest covering. Due to their small size, all 4 figures in each series are sold in the same blister card.

*'''VHS Minimates Box Set''' (2022)

:''Minimates'' Optimus Prime was rereleased as part of a [[San Diego Comic-Con]] 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles a [[Family Home Entertainment]] VHS tape. Only 2500 of this set were produced.
{{-}}

*'''Stasis Lock Optimus Prime''' (2023)
:Another San Diego Comic-Con brought another VHS-cassette-themed ''Minimates'' 4-pack exclusive, with another redeco of Optimus Prime - this time depicting him in "stasis lock" (meaning his grey dead color scheme, now with an opening empty chest compartment). Only 1500 of this set were produced.
{{-}}

==''ULTIMATES!''==
[[File:Super7 Ultimates Optimus Prime (G1).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion blaster, energon axe, Matrix of Leadership, surfboard, jetpack, basketball, energy restraints, left & right fists, 2 open hands, right gripping hand, left pointing hand, alternate head

: Part of the first wave of ''[[Super7#Transformers ULTIMATES!|Transformers ULTIMATES!]]'' from [[Super7]], Optimus Prime is a 7-inch-tall action figure based on his cartoon model. He features multi-directional joints at the neck, shoulders, wrists, hips, and ankles; plus swivel biceps, elbows, knees, and a bit of ab crunch. His hands pop out at the wrists so they can be replaced with his additional spare hands in different poses (or the obligatory Energon Axe), and his head can be replaced with an alternate based on the original Optimus toy.

: He also features a ''lot'' of accessories, more than any other toy in the wave, including a number of episode-specific ones: [[Sideswipe (G1)|Sideswipe's]] jetpack from "[[More than Meets the Eye, Part 3]]", a ridable surfboard from "[[The Ultimate Doom, Part 3]]", energy restraints from "[[S.O.S. Dinobots]]", and his giant basketball from "[[The Master Builders (episode)|The Master Builders]]". He also includes a miniature [[Spike Witwicky (G1)#ULTIMATES!|Spike Witwicky]] figurine.

: Preorders for Optimus Prime (and the rest of Wave 1) opened on [[January 29]] 2021, and closed on [[February 28]], with the toys purportedly shipping in winter of that year but not actually arriving until May 2022.

{{-}}{{anchor|Alligaticon}}
[[File:Ultimates Alligaticon.jpg|upright=1.66|thumb]]
<ul class="iconlist">{{Bp-d1|'''Alligaticon''' (2022)}}</ul>
:*''Accessories'': Optimus Prime head; Optimus Prime rifle; Decepticon tower tip w/ arm; [[Battle taxi]]

: Part of the third wave of ''ULTIMATES!'', the [[Alligaticon#Merchandise|Alligaticon]] is a 10-inch-long non-transforming figure made to emulate the the Optimus-parts creature's cartoon model to pretty exacting detail (including the ''lack'' of detail on most of its flat surfaces). It makes ample use of multi-swivel joints to give its limbs a relatively wide range of motion, plus extensive tail jointing, a mid-body bend, some neck waggle, and an opening jaw.

: It comes with multiple "[[City of Steel (episode)|City of Steel]]"-themed accessories, including a tower with Optimus's arm attached to it. The arm is permanently attached, but the hand uses the same wrist-joint as the individual Optimus figure, and can be popped off and replaced with his other hands if you like (Optimus's wrist-pegs are larger than many other figures', so sadly cross-compatibility is limited at best). Curiously, while the arm appears to be identical to the prior figure's arm, the gun is not, having a trigger guard the original version lacks.

: It also comes with Optimus's disembodied head on a ball-jointed "neck" with trailing wires. Like the arm, the head is the same mold as the original Optimus, but this time cast in clear-blue plastic painted over, with a small gap in the back of the head to attempt [[light-piping]]... but depending on the strength of the light, it might just shine through the paint. Since it's the same mold, one could theoretically swap it out, but trying to push that wire-mass back into the socket seems like it'd be a bit of a pain in the neck (wocka wocka!).

: Preorders for the Alligaticon (and the rest of Wave 3) opened on [[December 1]], 2021, with the toys projected to ship in fall 2022... and ''actually'' shipping in November 202''3''.

{{-}}{{anchor|Ultimates2}}
[[File:Super7 Ultimates Optimus Prime (Fallen Leader).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Fallen Leader)''' (2023)}}</ul>
:*''Accessories'': 2 fists, 2 open hands, 2 Matrix-grip hands, trigger-grip right hand, Matrix of Leadership, Matrix cover, ion blaster

: This retool and redeco of ''ULTIMATES!'' Optimus Prime is the latest of several representations of his dead body from "[[The Transformers: The Movie]]," now with a greyscale paint scheme, a heavily damaged left torso section, and cracks all over him (and on his rifle too for good measure). His chest is redesigned to allow it to open and reveal the Matrix.

: Preorders opened in June 2022, with the expectation that of figures shipping in May 2023.... but actually January 2024
{{-}}

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': ion blaster

: The original ''ULTIMATES!'' Optimus Prime was repackaged as a "Transformers Deluxe" figure, physically identical to the first release but now lacking all accessories except the gun. Its new packaging resembles a VHS clamshell box; specifically, the colors and trade dress strongly resemble the [[Video Gems]] tapes, while the character artwork and subtitle are taken directly from the [[The Original Transformers|Kid Rhino]] tapes.

: This piece was exclusive to, of all things, Macy's.

==''Pop!''==
[[File:Funko Pop Optimus Prime G1.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:Released as part of the ''Pop! Retro Toys'' segment, [[Funko Pop!|Funko]]'s ''Pop!'' Optimus Prime is a super deformed vinyl figure based on his original Generation 1 toy, though his eyes are painted blue like in the cartoon.

:This mold was later redecoed as [[Nemesis Prime (G1)#Pop!|Nemesis Prime]].

{{-}}{{anchor|PopMetallic}}
[[File:Funko Pop Amazon Metallic Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:An [[Amazon (website)|Amazon]] exclusive redeco of the figure above, this version of Optimus Prime features a more metallic paintjob.

{{-}}{{anchor|PopGIJoe}}
[[File:Funko Pop Mystery Box Optimus Prime Cobra Commander.jpg|thumb|upright=1.44]]
*'''Funko Mystery Box: Transformers vs. G.I. Joe''' (Giftset, 2021)
**''ID number:'' '''44'''

:Available only as part of a GameStop exclusive giftset, this retooled Optimus Prime comes with his Energon axe attached to his right hand instead of his ion blaster and comes [[Blindpacking|blindpacked]] inside a ''Transformers vs. [[G.I. Joe (franchise)|G.I. Joe]]''-themed lunch box alongside a ''Pop!'' [[Cobra Commander#Pop!|Cobra Commander]] figure, a Decepticon logo decal, a Cobra logo keychain, and a set of four pins of Optimus Prime, Cobra Commander, [[Megatron (G1)/merchandise#Pop!|Megatron]] and [[Duke (G.I. Joe)#Pop!|Duke]].

{{-}}{{anchor|PopJumbo}}
[[File:Funko Pop Jumbo 10-inch Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (Jumbo size, 2021)
**''ID number:'' '''71'''

:A larger version of the regular ''Pop!'' Optimus Prime measuring 10-inches tall.

{{-}}{{anchor|PopKeychain}}
[[File:Funko Pocket Pop Keychain Optimus Prime.jpg|thumb|upright=1.11]]
*'''Optimus Prime''' (Pocket ''Pop!'' Keychain, 2021)

:A smaller version of the regular ''Pop!'' Optimus Prime with a keychain attached to his head.

{{-}}{{anchor|Digital Pop!}}
*'''Optimus Prime''' ([[Funko Pop!#Digital Pop! NFTs|Digital ''Pop!'']], 2022)
**''Rarity:''
***''Monochrome:'' '''Common'''
***''Static:'' '''Common'''
***''Glowing:'' '''Uncommon'''
***''Chrome:'' '''Rare'''
***''Original:'' '''Epic'''
***''Monochrome, Matrix-opening:'' '''Epic'''
***''Gold, Matrix-opening:'' '''Grail'''
:{{W|Non-fungible token|NFT}}s depicting Optimus Prime in the Funko style. Some variants are depicted opening the Matrix over Cybertron, one of which (the Grail one) could be redeemed for a chance to get a physical version of the depicted figure. Said variant was limited to 999 pieces.
<center><gallery heights=200>
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_MONOCHROME.gif|Remember [[The many deaths of Optimus Prime#The Transformers: The Movie|this one?]]
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_STATIC.gif|Not gray, but still may as well be dead.
File:TRANSFORMERS_UNCOMMON_OPTIMUS-PRIME_GLOW.gif
File:TRANSFORMERS_RARE_OPTIMUS-PRIME_REDCHROME.gif|[[The Return of Optimus Prime, Part 1|Oops.]]
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME_ORIGINAL.gif
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME-GOLDVARIANT_MONOCHROME.gif
File:TRANSFORMERS_GRAIL_OPTIMUS-PRIME-GOLDVARIANT_ORIGINAL.gif
</gallery></center>
{{-}}{{anchor|PopDigital}}
[[File:Funko Pop Digital Optimus Prime.jpg|thumb|upright=1.44|Stealing NFTs is the right of all sentient beings.]]
*'''Optimus Prime''' (2022)
**''ID number:'' '''49'''

:Part of the ''Pop! Digital'' segment, this regular-sized vinyl figure portrays Optimus opening the Matrix of Leadership and is entirely painted gold. It could only be acquired by redeeming the Grail NFT above.

{{-}}{{anchor|Pop! Pin}}
[[File:Funko-Pop-Pin-Optimus-Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (''Pop!'' Pin, 2022)
**''ID number:'' '''18'''
**''Accessories:'' Display stand
:A metallic enamel pin based on Optimus Prime's vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

:A "redeco" of this pin as [[Nemesis Prime (G1)#Pop! Pin|Nemesis Prime]] was also released as a limited edition chase variant.

{{-}}{{anchor|Pop! Masks}}
[[File:Funko Pop mask Optimus Prime.jpg|thumb|upright=1]]
*'''Optimus Prime''' (''Pop!'' Masks, 2022)
:Released by Disguise Costumes in collaboration with Funko and exclusive to Walmart, ''Pop!'' Masks Optimus Prime is a large half face mask based on the head of the vinyl figure.

{{-}}{{anchor|Pop! Hallmark}}
*'''Optimus Prime''' (Christmas tree ornament, 2022)
:Released by [[Hallmark]] and also exclusive to Walmart, this Optimus Prime Christmas tree ornament is virtually identical to the vinyl figure in appearance.

{{-}}{{anchor|Fundays1}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Exclusive to a Funko-oriented event called Fundays, this regular-sized vinyl figure portrays [[Freddy Funko]] cosplaying as Optimus Prime. The body of this figure is the same as the regular Optimus, while the head has been modified to incorporate Freddy's face. This regular version was limited to 1500 pieces.

{{-}}{{anchor|Fundays2}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:A metallic version of the Freddy Funko as Optimus Prime figure was also available, now limited to only 500 pieces.

{{-}}{{anchor|Fundays3}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Also available and limited to 500 pieces was a version of Freddy Funko as Optimus Prime that glows in the dark.

{{-}}{{anchor|PopPotato}}
*'''Mr. Potato Head Optimus Prime''' (''Pop! Digital Retro Toys'', 2022)
**''Rarity:'' '''Grail'''
**''ID number:'' '''127'''
:Similar in concept to other [[Mr. Potato Head]] toys, this vinyl figure is a representation of said character taking the appearance of Optimus Prime, except it can't be taken apart piece by piece.

:This figure is limited to 1550 units and can only be acquired redeeming an NFT representing this version of the character.

{{-}}{{anchor|PopLights}}
*'''Optimus Prime''' (Lights and Sounds, 2023)
**''ID number:'' '''120'''
**''Accessories:'' Base
:A standard-sized figure released in the ''Retro Toys'' line, "Lights and Sounds" Optimus Prime features... well, lights and sounds. He also includes a display base, and is posed with his left arm pointing forward and his right hand holding his blaster.

:This figure is exclusive to the Funko Shop online store.

{{-}}{{anchor|Pop! Tee}}
*'''Optimus Prime Tee''' (T-shirt, 2023)
:A T-shirt available on Funko's online store, it features artwork of ''Pop!'' Optimus Prime in the same pose and style as the original Generation 1 Optimus Prime packaging art.

{{-}}{{anchor|Pop40Years}}
*'''Optimus Prime''' (2024)
**''ID number:'' '''131'''

:Released in celebration of the 40 years of the franchise, this regular sized ''Pop! Retro Toys'' Optimus Prime is a similar mold to the original release, but is doing a different pose and features toy-accurate yellow eyes.

{{-}}{{anchor|Pop40Years2Pack}}
*'''Optimus Prime & Megatron''' (2-pack, 2024)

:A Hot Topic exclusive release of the 40th anniversary Optimus Prime and [[Megatron (G1)/merchandise#Pop40Years2Pack|Megatron]] vinyls with a metallic finish to their paintings.
{{--}}

==Modern Icons==
[[File:Modern_Icons_Optimus_Prime_helmet.jpg|thumb|upright=1.66|GIVE ME MY FACE.]]
*'''Optimus Prime Modern Icons Replica Helmet''' (December 27, 2021)
:A collaboration between Hasbro and statue and replica brand Modern Icons, this is a wearable helmet for adult collectors, based on Optimus Prime's head. It features light-up eyes and authentic sounds and phrases.

:Originally due for release on August 16, 2021, the Optimus Prime helmet was delayed until December 27 (as was [[Megatron (G1)/merchandise#Modern Icons|its Megatron counterpart]]). The helmet is a GameStop exclusive in the United States.
{{--}}

==''Super Shogun''==
*'''Optimus Prime''' (2021)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Another "retro-styled" non-transforming figure by [[Super7]], ''Super Shogun'' Optimus Prime is meant to be an homage to the 1970s "{{w|Shogun Warriors (toys)|Shogun Warriors}}" toyline. To match the famous features of those older toys, this Optimus stands 24" tall and is mostly made of hollow plastic, with 3 points of articulation, wheels on his feet, and a spring-loaded firing left fist. His chest doors open to reveal a removable Matrix of Leadership. Suggested retail price was $350 - hopefully if you're old enough to remember "Shogun Warriors" you've gotten a good job by now.

*'''Optimus Prime (Fallen Leader)''' (2022)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Continuing the trend from their ''ReAction'' and ''ULTIMATES!'' Optimus Prime figures above, Super7 also produced a grey redeco of ''Super Shogun'' Optimus Prime representing his dead body. {{-}}

==''Zōteki''==
[[File:ZOTEKI-024-Optimus-Prime.jpg|thumb|upright=1.66|I farted.]]
*'''Optimus Prime''' ([[2021]])
**''ID number'': '''024'''

:A collaboration between [[Hasbro]] and statue/replica brand [[Jazware]], ''[[The Transformers (franchise)|The Transformers]]'' was added as a part of the ''[[Zōteki]]'' line alongside other iconic brands such as [[Marvel Comics|Marvel]], to recreate some of the main "Generation 1" characters. The 24th figure of the ''Zōteki'' line; Optimus Prime wields his iconic [[Ion blaster]].

:Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
{{-}}

==Eaglemoss==
[[File:EaglemossChess OptimusPrime.jpg|upright=1.11|thumb]]
* '''Transformers Gen-1 Chess Set''' (<s>2021</s>)
:In the planned [[Chess#Eaglemoss|Transformers Chess Set]] by [[Eaglemoss]], a relatively large and very well detailed statue of Optimus Prime was slated to be the standard King piece on the Autobot side.

:A Kickstarter campaign to raise the necessary funds for this project was launched, but failed to meet its goal by September 24, 2021 and the whole thing was canceled. The Optimus Prime piece managed to technically get a very limited release, however, as some online influencers in the ''Transformers'' fandom received copies gifted to them by Eaglemoss during the Kickstarter campaign.
{{canceledtoy}}
{{-}}

==e-HOBBY==
===''Transformers Character Card''===
{{anchor|TCC G1}}
[[File:Transformers Character Card G1 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Convoy & Megatron Set''' ([[January 25]], [[2022]])
**''ID number:'' '''01 & 02'''
{{toydesigner|[[Shin Sasaki]] (illustration)}}

:Released as part of the first wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Roller (G1)|Roller]]) and [[Megatron (G1)|Megatron]] (with [[Starscream (G1)|Starscream]], [[Thundercracker (G1)|Thundercracker]] and [[Skywarp (G1)|Skywarp]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#01|Translation of G1 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Laser}}
[[File:Transformers Character Card G2 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Battle Convoy & Megatron Set''' ([[March 14]], 2022)
**''ID number:'' '''11 & 12'''

:Released as part of the second wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime and Megatron in their ''[[Transformers: Generation 2 (franchise)|Generation 2]]'' bodies along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#LaserOptimusPrime|Laser Optimus Prime]]" toy.
::*''[[Source:Transformers Character Card#11|Translation of G2 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Black}}
[[File:Transformers Character Card Megatron Black and Convoy Black.jpg|upright=1|thumb]]
*'''Transformers Card Binder (includes 2 special cards)''' ([[November 1]], 2022)
**''ID number:'' '''EX'''

:Released in its fifth wave as something of a "season one finale" to the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this 40-slot binder intended to contain the entire ''Character Card'' series thus far is packed with a pair of holographic trading cards depicting super-deformed art of Optimus Prime and Megatron in the forms of their first e-HOBBY exclusive toys along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the ''[[Hybrid Style]]'' "[[Optimus Prime (G1)/toys#THS02B|Convoy Black Version]]" toy.
::*''[[Source:Transformers Character Card#EXOP|Translation of Optimus Prime Black Version's Transformers Character Card]]''
{{-}}

{{anchor|TCC Hero}}
[[File:Transformers Character Card Jhiaxus and Hero OP.jpg|upright=1|thumb]]
*'''Jhiaxus & Convoy Missile Trailer Set''' ([[February 6]], [[2023]])
**''ID number:'' '''41 & 42'''

:Released as part of the sixth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Jhiaxus (G2)|Jhiaxus]] and ''Generation 2'' Optimus Prime along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#HeroOptimusPrime|Hero Optimus Prime]] toy.
::*''[[Source:Transformers Character Card#42|Translation of Hero Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Matrix}}
[[File:Transformers Character Card Matrix and Alpha Trion.jpg|upright=1|thumb]]
*'''Alpha Trin & Convoy Set''' ([[April 22]], 2023)
**''ID number:'' '''49 & 50'''

:Released as part of the seventh wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of "[[Alpha Trion|Alpha Trin]]" and Optimus Prime touting the [[Matrix of Leadership]] along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus's card notably eschews the line's usual [[Power Plans]]-inspired motif for a reproduction of the original 1984 [[Package art#Hasbro|toy packaging mural]] in celebration of the line's 50th release.
::*''[[Source:Transformers Character Card#50|Translation of Optimus Prime (with Matrix)'s Transformers Character Card]]''

{{-}}

{{anchor|TCC Orion}}
[[File:Transformers Character Card Hot Rod and Orion Pax.jpg|upright=1|thumb]]
*'''Orion Pax & Hot Rodimus Set''' ([[August 14]], 2023)
**''ID number:'' '''59 & 60'''

:Released as part of the eighth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Orion Pax and "[[Hot Rod (G1)|Hot Rodimus]]" along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#59|Translation of Orion Pax's Transformers Character Card]]''

{{-}}

{{anchor|TCC Action}}
[[File:Transformers Character Card Action Master Megatron and OP.jpg|upright=1|thumb]]
*'''Convoy (Action Master) & Megatron (Action Master) Set''' ([[December 28]], [[2024]])
**''ID number:'' '''93 & 94'''

:Released as part of the thirteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Armored Convoy]]) and Megatron (with [[Neutro-Fusion Tank]]) in their [[Action Master]] forms along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#93|Translation of Action Master Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Autobot}}
[[File:Transformers Character Card Autobots and Primus.jpg|upright=1|thumb]]
*'''Primus and Cybertron Army Set''' ([[February]], [[2025]])
**''ID number:'' '''101 & 102'''

:Released as part of the fourteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Primus]] in the form of his [[Primus#2010|"Creator" toy]] and the Generation 1 [[Autobot]]s (as represented by Optimus Prime, [[Blaster (G1)|Blaster]], [[Eject (G1)|Eject]], [[Grimlock (G1)|Grimlock]], [[Prowl (G1)|Prowl]], [[Crossblades (G1)|Crossblades]], [[Jazz (G1)|Jazz]] and [[Turbo Board]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#102|Translation of the Autobots' Transformers Character Card]]''

{{comingsoontoy}}
{{--}}

===Acrylic keychain series===
[[File:E-Hobby Optimus Prime and Bumblebee keychains.jpg|upright=1|thumb]]
*'''Convoy & Bumble''' ([[October]], [[2022]])

:Released as part of the first wave of an [[e-HOBBY]] exclusive series, this pair of keychains depicts character art and assets re-used from Optimus Prime and [[Bumblebee (G1)|Bumblebee's]] [[The Transformers: Masterpiece|''Masterpiece'']] releases, namely [[Optimus Prime (G1)/toys#MP44|MP-44 Convoy]] and [[Bumblebee (G1)/toys#MP45|MP-45 Bumble and Spike 2.0]] respectively.

{{--}}

==''Authentics''==
{{anchor|ClipBot}}
[[File:ClipBotsPrime.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2018)

:''Clip Bots'' Optimus Prime is a small [[super deformed]] plush that can be "transformed" into a little tractor trailer by flipping it inside out. It features a plastic clip so it can dangle from whatever you clip it to.
{{-}}
{{anchor|22Mask}}
[[File:Authentics Optimus Prime Mask 2022.jpg|upright=1|thumb|Unlike some Optimus Primes, he'll [[Transformers: Revenge of the Fallen (film)#Quotes|give you his face]] instead.]]
*'''Optimus Prime''' (2022)

:Modeled after Optimus Prime's evergreen design, this [[roleplay toy]] mask was released along side an [[Bumblebee (G1)/merchandise#22Mask|Bumblebee]] version.
{{-}}
{{anchor|AquaPals}}
[[File:AquaPalsLargeOptimus.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2023)

''Aqua Pals'' Optimus Prime was released by [[WAHU]]. It is a plush made out of material designed to dry quickly, allowing it to be played with in water. The large plush is 24 inches tall.
{{-}}

{{anchor|DogToys}}
[[File:CrunchandsqueakOptimusPrime.jpg|upright=1|thumb]]

*'''Crunch & Squeak Optimus Prime''' (2023)

Manufactured by [[Gramercy Products]], ''Crunch and Squeak'' Optimus Prime is a simple dog toy, with a water bottle inside to be crunched. Because of this, its legs are fully attatched to each other. The embroidery color for the outline of the eyes varies, coming in gray or blue.
{{-}}
*'''Squeak & Tug Optimus Prime''' (2023)

''Squeak & Tug'' Optimus Prime is another dog toy by Gramercy Products. It has two rope knots connected from the bottom of each of its legs, for tugging purposes. It also has a mouth ''on top'' of its faceplate.

{{anchor|24Mask}}
[[File:Authentics_Optimus_Prime_Mask_2024.jpg|upright=1|thumb]]
*'''Optimus Prime Mask''' ([[2024]])

:Manufactured by [[Peachtree Playthings]], this mask is a completely new mold based on Optimus Prime's evergreen design, though it's a bit more stylized then the 2022 version. It was found at discount stores such as Dollar Tree with no prior announcement. As with the previous mask, it was released along side an [[Bumblebee (G1)/merchandise#24Mask|Bumblebee]] version.
{{-}}
{{anchor|CBoptimus}}
[[File:Authentics Cyber Battlers Optimus.jpeg|upright=1|thumb]]
*'''Cybertron Battlers Optimus Prime''' ([[2022]])
:Released in the ''Cybertron Battlers'' subline of ''Authentics'', this vinyl figure is a non-transforming, 5.5 inch rendition of Optimus Prime in his evergreen design with limited points of articulation. He has an Energon Axe molded into his right hand.

:He comes packaged either individually with a tag, or in twos in a box together with [[Bumblebee (G1)/merchandise#Authentics|Bumblebee]] and [[Megatron (G1)/merchandise#Authentics|Megatron]].
{{-}}

{{anchor|Teeturtlereverse}}
[[File:Small_Reversible_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Reversible Plushie Optimus Prime''' (2025)

:Released by [[TeeTurtle]], ''Reversible Plushie'' Optimus Prime is a round, [[super deformed]] plush, that can be turned inside out to reveal a truck alternate mode. A 3 inch version was released in blind boxes, while a 6 inch version was made available exclusively at [[Walmart]]. It appears to be based on Optimus Prime's [[evergreen]] design, with a license plate that reads 'ROLL OUT'.
{{-}}
{{anchor|Teeturtlecloudhead}}
[[File:Cloudheads_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Cloudheads Optimus Prime''' (2025)

:Also released by [[TeeTurtle]], ''Cloudheads'' Optimus Prime is another [[super deformed]] plush based off of Optimus's [[evergreen]] design. It is 5 inches tall. It has a large head, and its body is weighted with glass beads.
{{-}}

==Nendoroid==
[[File:Nendoroid G1 Optimus Prime.jpg|upright=1.66|thumb]]
*'''Nendoroid Optimus Prime (G1 Ver.)''' ([[2022]])
**''Nendoroid ID Number'': '''1765'''
**''Accessories'': Ion blaster, Energon-axe, pointing hand

:[[Nendoroid]] Optimus Prime is a [[super deformed]], adorable rendition of the original Autobot commander. It is the first Nendoroid figure released for a "Generation 1" character, as the first Nendoroid figures for ''Transformers'' were for the ''[[Bumblebee (film)|Bumblebee]]'' movie.

:As with most Nendoroids, Optimus Prime can interchange body parts with compatible figures, and comes with an alternative "pointing hand" accessory to aid with specific posing. The figure is packed with Optimus's trademark Ion blaster and Energon-axe weapons (generically referred to as a gun and an energy axe by the Good Smile Company website), the latter of which replaces Optimus's hand when wielded. He also features articulation at the head, knees, shoulders, elbows, and even his chest.

:This mold was later redecoed as [[Nemesis Prime (G1)#Nendoroid|Nemesis Prime]].
{{-}}

==Icon Heroes==
*'''Optimus Prime X Bumblebee Retro Pin Set''' (2022)
: A hard enamel pin based on Optimus Prime's original G1 package art made by Icon Heroes. It comes carded with a [[Bumblebee (G1)/merchandise#Icon Heroes|Bumblebee]] pin.

: This pin was also available in [[Nemesis Prime (G1)#Icon Heroes|Nemesis Prime]] colors.
{{comingsoontoy}}

{{-}}
[[File:Icon-Heroes-Optimus-Prime-Action-Statue.jpg|upright=1.11|thumb|''Of course'' we need another superdeformed Optimus Prime statue, why do you ask?]]
*'''Optimus Prime Action Statue''' ([[2023]])
: A 12" tall polystone statue of Optimus Prime holding his ion blaster and standing over an Autobot insignia base. The statue is slighty superdeformed with an unusually large head and features some neck articulation.

: Each sample is going to be individually numbered and come with a certificate of authenticity.
{{comingsoontoy}}

{{-}}

==Just Play==
{{anchor|Podpals}}
[[File:PodpalsOptimusLarge.jpg|upright=1|thumb]]

*'''Podpals Optimus Prime''' (2023)

Made by [[Just Play]], ''Podpals'' Optimus Prime is a rounded plush. It has tiny flaps of fabric for its legs and head details, while other details are printed on. There are two versions, an 8 inch version and a 3 inch version. They are identical besides their size.

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>

:Optimus Prime is a small, soft plastic figure, 2" tall, with no articulation. It's overall based on his appearance in the G1 cartoon. He does have a noticable lack of paint apps; most notably the windows on his chest not being painted at all.

:The packaging is G1-styled with the classic black-red gradient and the G1 Optimus Prime toy in the top right corner.

[[File:JustPlay_G1_Optimus_Prime.jpg|thumb|upright=.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>

:This figure is identical to the original release. Unlike the original release, however, he also comes with a foil sticker depicting his G1 design on a card with a sort of profile picture on the back and text underneath it saying "OPTIMUS PRIME IS THE LEADER OF THE AUTOBOTS." The packaging is also different as it no longer features Optimus Prime (having been replaced with a block advertising the new card).
: There's a variant of this found at stores like Dollar Tree where the block advertising the card is moved to the top left with a red circle that says "$1.25" in it in the top right instead.

{{-}}

==Kotobukiya==
===Bishoujo Series===
[[File:Bishoujo-Series-OptimusPrime.jpg|upright=1.3|thumb|Looking this good is the right of all sentient beings.]]
*'''Bishoujo Series Transformers Convoy/Optimus Prime''' (January 2023)
**''Accessories'': Alternate masked face
**''Known designers:'' [[Shunya Yamashita]] (artist)

:''[[Kotobukiya]] [[Bishoujo Series]]'' Convoy/Optimus Prime renders the classic Autobot commander as a cute anime girl (formally termed as a ''{{w|Bishōjo}}''). Bishoujo Optimus's necklace represents the [[Matrix of Leadership]], while Prime's trailer and wheels are represented as her suitcase and boots respectively.

:''Bishoujo Series'' Optimus Prime also comes with an alternate [[Mouthplate|masked]] headpiece, and a red display base designed after the Autobot insignia. A Deluxe Edition release also included a B5-sized acrylic board for display, featuring Yamashita's original artwork of the character.

:This statue was later recolored and retooled to create ''Bishoujo Series'' [[Nemesis Prime (G1)#Kotobukiya Bishoujo Series|Nemesis Prime]].
{{-}}
===Frame Arms Girl===
[[File:Kotobukiya-TF-Optimus-Prime-Fumikada-Shimane-Ver-kit.jpg|thumb|upright=1.66|Minerva's <s>Ginrai</s> Optimus Prime cosplay.]]
*'''Convoy/Optimus Prime Humikane{{sic}} Shimada Ver.''' (June 2025)
**''Accessories'': 5 pairs of hand parts, 2x2 Faceplates (Android, Human), Front hair/helmet parts for human face config, Ion Blaster, Energon Axe
**''Known designers:'' [[Fumikane Shimada]] (artist)

:Designed by Humikane (actually "Fumikane") Shimada of ''Frame Arm Girls'' and ''30 Minutes Sisters'' fame, this 135mm articulated ''FA Girl'' model kit (though technically not referred to as such on the box, she is listed as part of the ''FA Girl'' product line on Kotobukiya's website) of Optimus Prime/Convoy is another personified take of the character compared to the ''Bishoujo Series'' statue above. Aside from her hand parts and the two signature weapons, Optimus also comes with two types of faceplates, with two expressions for each, and a few front hair/helmet parts for each configuration. The rear truck wheels on her legs can be flipped down to form a pair of support skates.
{{--}}

==Micro Machines==
[[File:MMMPrime&Tracks.jpg|upright=1.66|thumb]]
*'''Optimus Prime Hauler Playset''' (2022)
**''Accessories'': [[Tracks (G1)/toys#Micro Machines|Tracks]] vehicle, decoder
{{charstubtoys}}

==XM Studios==
*'''Optimus Prime''' (2022)

:This hand-painted porcelain statue of Optimus Prime stands over 26" tall and features alternate arms to allow owners to display him in different poses or switching out his signature laser rifle for his energon axe. His chest-mounted Matrix of Leadership lights up, and the set also includes a sculpted version of the truck mode to display next to the robot. Suggested retail was about $1,700.

*'''Optimus Prime Bust''' (2023)

:A four-foot-tall bust of Optimus Prime, with hand-burnished metallic features and a $4,000 price tag.
{{-}}

==''Transformers × Mini World''==
[[File:MiniWorldOptimus.jpg|thumb|upright=1.66]]
*'''Optimus Prime''' (2023)
**''Accessories'': Transforming base, gun, axe, 2 smokestacks, machine part, crane arm, 2 connectors

:''[[Transformers × Mini World]]'' Optimus Prime is a tie-in to the popular [[China|Chinese]] game ''[[Mini World]]''. It comes with a display base which can fold up into a cube-shaped representation of Prime's truck mode, complete with rolling wheels. The figure can transform into a storage mode and store fully inside the cube, or you can remove his head and replace it with the folded up cube. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and axe accessories. The set includes two smokestacks that can be pegged onto the truck-cube mode.

:Each set includes [[Build a Figure]]-like machinery components which can be combined with parts from other sets to make new structures.

:It is exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.
{{-}}

==Mochibots Transformers Plush==
[[File:MochibotsPrime.jpg|upright=1.3|thumb|It was either this or a banana to show how tall I am. And I'm ''NOT'' Primal!]]
<ul class="iconlist">{{Bp-a1|'''Mochibots "Transformers" Plush Convoy''' (2023)}}</ul>
:Apart of the line of cute, cuddly Transformers Plushies, [[Mochibots Transformers Plush|Mochibots]] Convoy (otherwise known as ''Optimus Prime'') is a 5.5 CM tall variation of the character, with Sunbow cartoon-accurate white pants and all! This Convoy is given a "Fumo" stylization, making the robotic detailing more rounded and soft, with stubby limbs and a cute, somewhat stern expression. Every detail is sewn-in, leading to him and the rest of the Mochibots line having a premium feel, with added texture and depth added to each detail. In addition to all this cute Convoy's offerings, he has a block of stuffed material in the back to represent his "Backpack", and a stitched-on Autobot logo! Though, much like [[Cliffjumper (G1)/toys#Mochibots Transformers Plush|Cliff]], the Autobot logo seems to have a squinting expression, likely a limitation of how far the detail can go with this process. Like many other Mochibots, Convoy also features a special, reflective material in his eyes and windows, with light giving it a special shimmer effect whenever it hits it.

:Convoy was released in the Summer of 2023 in "Volume 1" of the Mochibots line, alongside Cliff, Bumble, and Convoy's Shattered Glass counterpart. This line was exclusive to China and Japan, with almost all of them being locked to Asia via [[amiami|amiami's]] digital storefront.

{{-}}

==Fools Paradise==
{{anchor|LOWFOOL}}[[File:LOWFOOL League of Steel Optimus Prime.jpeg|upright=1.66|thumb|Some contrast to the bishoujo, huh?]]
*'''Optimus Prime''' (2023)
**''Accessories'': Football

:Part of a collaboration between Hasbro and [[Hong Kong]]-based online store ZCWO, Optimus Prime joins the "League of Steel" subline of [[Fools Paradise]]'s LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues of [[Neon Genesis Evangelion|Evangelion]]s and {{w|Gundam}}s. He is depicted as a human man wearing heavily Optimus Prime-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache (not, as you might surmise, as a reference to [[Peter Cullen]]'s own face fuzz).

:Preorders for Prime opened in June 2023, with a projected release date of November.

{{-}}

{{anchor|ZCWO}}[[File:Fools Paradise Optimus Prime statue.jpeg|upright=1.3|thumb]]
*'''Optimus Prime''' (2024)

:A second statue of Optimus Prime by Fools Paradise portrays Optimus Prime in a much more conventional (if heavily stylised) design. This vinyl statue of Prime stands approximately 60cm tall, and features light up LED eyes and apparently boasts a full range of articulation. It also features a somewhat weathered paint job.

:Preorders opened in November 2023, with a projected release date of March 2024.
{{comingsoontoy}}

{{-}}

==McFarlane Toys==
{{anchor|PagePunch}}[[File:Page Punchers Optimus Prime and Megatron.jpeg|upright=1.66|thumb|If you squint, you can just ''barely'' make out the lack of a waist swivel.]]
*'''Optimus Prime and Megatron''' (2024)
: ''[[Page Punchers]]'' Optimus Prime is 3-inch non-transformable action figure based off his [[IDW Publishing|IDW]] design.

: He comes in a two-pack with [[Megatron (G1)/merchandise#PAGEPUNCH|Megatron]], packaged with [[New Cybertron Part 1: To Walk Among the Chosen|''Optimus Prime'' #1]] and [[Dissolution Part 6: This Machine Kills Fascists|''Lost Light'' #6]].

{{-}}

==''Hot Wheels''==
{{picsneeded}}
{{anchor|HWTrackFleet}}
[[File:Hot Wheels Track Fleet Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1| '''Optimus Prime''' (Track Fleet, 2024)}}</ul>
:*''Accessories'': Trailer (detachable)
{{toydesigner|[[Charlie Angulo]] ([[Mattel]])}}
:''[[Hot Wheels (franchise)|Hot Wheels]]'' Track Fleet Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Unlike the concurrently released [[Bumblebee (G1)/merchandise#HWScreenTime|''HW Screen Time'' Bumblebee]], Optimus does ''not'' have a sculpted robot face on his undercarriage.

{{-}}{{anchor|HWSkate}}
[[File:Hot Wheels Skate Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Skate, 2024)}}</ul>
:*''Accessories'': Finger sneakers
:Part of the ''Hot Wheels Skate'' subset, this is an Optimus Prime-themed finger skateboard that comes with a pair of red finger sneakers. The shape and packaging use Dreamwave-era artwork of Optimus Prime.

{{-}}{{anchor|HWScreenTime}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (HW Screen Time, 2025)}}</ul>
:*''Mainline ID number:'' 104/250
:*''HW Screen Time ID number:'' 6/10
{{toydesigner|[[Manson Cheung]] and Leeway Chang ([[Mattel]])}}
:''Hot Wheels'' HW Screen Time Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Compared to the ''Track Fleet'' version, this version of Optimus ''has'' a sculpted robot face on his undercarriage, is larger and does not feature a trailer. It is largely based on the transforming ''Mattel Creations'' version of Optimus but with some modifications for cost reasons.

{{--}}

==''Beyblade X''==
[[File:Beyblade_X_Transformers_OptimusPrime.jpg|thumb|Not pictured: Optimus Prime using this to part the Red Sea.]]
*'''Optimus Prime and Megatron Multipack Set''' (2024)

:'''Optimus Prime 4-60P''' was available in a two-pack with [[Megatron (G1)/merchandise#Beyblade X|Megatron 4-80B]], which was exclusive to Amazon in Hasbro territories, and exclusive B4-sponsored stores in Takara-Tomy territories. It consists of three pieces that can be interchanged with those of [[Beyblade#BEYBLADE X|other ''Beyblade X'' tops]]; an attacking "Blade" primarily made of metal, a "Ratchet" that locks parts together and determines height, and a "Bit" that touches the ground and determines movement.

:The "Optimus Prime" Blade features evergreen art of Optimus Prime on its central Gear Chip and is partial of the mainline ''Beyblade X'' Blade "Helm Knight". The Ratchet (4-60) and Bit (Point) are recolored parts from other ''Beyblade X'' tops.

:In Hasbro territories, a QR Code sticker hidden underneath the Blade can be scanned into the ''Beyblade X'' companion app. In Takara-Tomy territories, the QR Code stickers are omitted in favor of a Beycode Card packed with the instructions. However, scanning any of these QR codes only awards the player with in-app points, and will not unlock the Beyblade for in-game use like it would for any mainline ''Beyblade X'' tops.

{{-}}

==Yolopark==
===AMK===
{{anchor|AMKPro}}
[[File:YoloparkAMKProG1OptimusPrime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released as part of Yolopark's AMK Pro line, Optimus Prime comes in pre-assembled modules as opposed to traditional model kit runners. This allows him to be assembled quickly and easily without tools. Unlike Yolopark's regular AMK line, the AMK Pro line features diecast parts as well as light-up features. In Prime's case, his eyes will light up when tapping his head with a magnet. The feature requires one CR927 battery which is not included.

:The fully assembled figure resembles the ''Masterpiece'' Convoy 3.0 and features an opening Matrix chamber and fully articulated hands, eliminating the need for alternate hands. Both the ion blaster and Megatron gun can be wielded by his hands, though removing the stalk from the Megatron gun makes this much easier.

:The figure was redecoed into Nemesis Prime.

{{-}}
{{anchor|AMKHasbroEdition}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Hasbro Edition, 2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Stand with Teletraan-1 Backdrop

:The AMK Pro Optimus Prime kit is re-released under the "Hasbro Edition" branding. In this release, the die-cast parts have been replaced with plastic, and the light-up feature and the Megatron gun accessory are no longer included. In addition, Prime's display stand also comes with an additional Teletraan-1 backdrop for the arm unit.

{{-}}
{{anchor|AMKComboSet}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-and-Megatron-Combo-Set-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Megatron and Optimus Prime Combo Set''' (2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Energy Mace, Light Sword, Laser Pistol, Two display stands (Teletraan-1 Backdrop, Ark Backdrop)

:The "Hasbro Edition" of the AMK Pro Optimus Prime kit is also sold as a two-pack with the same line's Megatron. The 2-pack also comes with a unique pin.

{{-}}{{anchor|AMKClear}}
[[File:Yolopark-TF-Cybertron-Con-2024-AMK-Pro-Optimus-Prime-Clear.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Clear Color)''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released exclusively for the Cybertron Con 2024 in Shanghai (and later in the Yolopark online store), this Optimus Prime is a translucent redeco of the AMK Pro kit.

{{-}}{{anchor|2025AMK}}
[[File:Yolopark-TF-AMK-Optimus-Prime-(2025).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK, 2025)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Matrix of Leadership]]

:This AMK Optimus Prime only comes with his Ion Blaster and the Matrix of Leadership. In addition, He also features cartoon-based colors, complete with opaque chest windows. As the original mold's joints were meant to be molded in die-cast or metallic gray plastic, these areas were also molded in the same white plastic.
{{-}}

===AMK Mini Series===
[[File:TF-Yolopark-AMK-Mini-Series-Optimus-Prime.jpg|thumb|upright=1.66|Swap my right arm with Megatron's so I could go to the offensive!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': 2 additional pairs of hands (Splayed, Pointing), [[Ion blaster]]

:The ''AMK Mini Series'' Optimus Prime is a smaller version of the character, featuring swappable hand parts and his usual Ion Blaster.

:Initial images of the kit's hand-painted prototypes showed Prime utilizing a desaturated blue and red. His white parts are slightly darker, while his grill and abs are flat grey, and the chest windows are white. Unlike the prototype, the blue paint on the crotch is missing in the final product.

:Optimus Prime is sold as either an individually marked single, a 2-pack with the same line's Megatron in a single box, or as a blind-box figure. This mold was also used to make [[Nemesis Prime (G1)|Nemesis Prime]] for the blind-box line, and [[Delta Magnus]] for the Agabyss-organized ''[[BotCon]] 2024'' exclusive House of Magnus BotCon VS Set.

{{-}}{{Anchor|AMKMiniIDW2005}}
<ul class="iconlist">{{Bp-a1|'''Orion Pax (IDW)''' (2025)}}</ul>

:This ''AMK Mini Series'' kit is based on Orion Pax's appearance in the 2005 ''IDW'' comics.

{{comingsoontoy}}
{{-}}

===BMK===
[[File:Yolopark-BMK-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Accessories'': [[Ion blaster]]

:The ''BMK'' (Which stands for "Beginner Model Kit") Optimus Prime is a larger version of the ''AMK Mini'', with the design being based on the ''AMK/Pro'' release. As with other ''BMK''s, Optimus features similarly basic articulation, consisting of a ball-jointed head, ball-jointed shoulders, single-axis 90-degree elbows, a rotating waist and lower legs, and slightly swiveling ankles...that's it.

:The kit has an unfortunate packaging quality control issue: the thin head antennas are likely to be bent or even broken off in most packages.
{{-}}

==Blokees==
===Galaxy Version===
{{anchor|Galaxy Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus.jpg|thumb|upright=1.66|Blokees kits are ''truly'' the right of all Sentient Beings.]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot/Decepticon insignias

:Released in the first wave of ''Galaxy Version'' line of blind boxes, [[Blokees]] Optimus Prime is a roughly 4-inch tall, highly-articulated, and non-transforming snap-on model kit of the Autobot leader. He is built on a "Standard Body" skeleton shared with other Blokees figures in the line, but with different body pieces to make them distinct. As advertised in the box, Prime has a pull rate of 1 in every 12 boxes, or three times across four cases.

:Prime comes with a pair of closed and open hands, along with a left hand molded in a pointing position exclusive to this figure. He also comes with his trademark Ion Blaster and Energon axe weapons—the former can be plugged into the closed hands, and the latter can be plugged into either wrist. The barrel of the Ion Blaster is compatible with the blast effects included with Ironhide, Megatron, and Skywarp. He also has a figure stand with either four studs (China release/Chinese logo) or two studs (Global release/English logo) on top, which he can plug into and connect to similar stands. Optimus can also accommodate the jetpack included with Sideswipe, which was released as part of the ''Shining Version'' lineup.

:If one chooses, Prime's inner shoulder parts and elbow joints can be swapped with the red-colored pieces from the same lineup to create a more cartoon-accurate coloration.

:His body parts are redecoed to make ''Galaxy Version'' [[Optimus Prime (SG)#Blokees|Shattered Glass Optimus Prime (IDW)]], [[Ultra Magnus (G1)/merchandise#Blokees|Ultra Magnus (DW)]], and [[Nemesis Prime (G1)#Blokees|Nemesis Prime]].

{{-}}{{anchor|BlokeesMetallic}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot and Decepticon insignias

:The chase figure of ''Galaxy Version'' 01, with a much slimmer pull rate of 1 in every 36 boxes, i.e. once in four cases. Prime is redecoed in a metallic sheen, save for the joint pieces along with more show-accurate deco on the crotch, thighs, back, and shins. He comes with the same accessories as his regular counterpart.

{{-}}
{{anchor|BlokeesPink}}
[[File:Blokees Cybertron Con 2024 Pink OP.jpg|thumb|upright=1.4|Not the kind of [[fandom:gundam:Trans-Am_System|Trans Am]] you'd expect Optimus Prime to turn into.]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Pink)''' (Galaxy Version, 2024)}}</ul>
:*''Accessories:'' Pair of open hands, one pointing left hand, Energon Axe, Ion Blaster, Matrix of Leadership with support stand

:Released exclusively for the Cybertron Con 2024 event, this Optimus Prime kit is sold as a pre-assembled redeco of the first Galaxy/Shining Version kit, featuring opaque and translucent <s>[[energon]]</s> pink livery, and omits the light-up feature. He comes with all weapons and hand accessories from the original Galaxy Version release and the Matrix/support stand from the Shining Version.

:This Optimus Prime is limited to 999 units, with 400...no, 100<ref>{{citesocial|quote=Dear Fans, We sincerely regret to inform you that the on-site sales of the exclusive item - Optimus Prime (Pink) at the 2024 Transformers Cybertron Con have been temporarily canceled. We apologize for any inconvenience this may cause! As of today (December 6), we have sold 100 units, 300 remaining units would be sold through other sales channels, please stay tuned for our further announcements. Thank you for your understanding and support!|link=https://twitter.com/BlokeesOfficial/status/1864925074991780214|name=BLOKEES.OFFICIAL|site=Site Formerly Known as Twitter|year=2024|month=12|day=06}}</ref> sold at the convention, and the rest distributed through online and physical stores across mainland China.

{{-}}{{anchor|GVParallelUniverse}}
[[File:Blokees-TF-Galaxy-Version-06-IDW-Optimus-Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The sixth wave of the ''Galaxy Version'' blind boxes features an Optimus Prime based on his design and coloration from the IDW story [[The Transformers: Stormbringer|''Stormbringer'']]. In addition to the new hand runner introduced in the 4th wave, Optimus comes with his twin cannons and blaster accessory, complete with its blast effect. Like the other ''Galaxy Version'' kits since Wave 5, Optimus features a slightly upgraded suite of standard body parts, notably the sturdier pre-assembled hinge joints and the multi-colored head piece with color-coded eyes.

:As advertised in the box, he has a pull rate of 1 in every 12 boxes.

{{-}}
[[File:Blokees-TF-GV-06-Hidden-Orion-Pax.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The chase figure of ''Galaxy Version'' 06, with 1:36 odds, this Optimus Prime (now called "Orion Pax") kit is a redeco of the kit above, representing the force field-equipped coloration activated by Trailbreaker in "[[Elegant Chaos Part 1: All Our Parlous Yesterdays]]".

{{-}}{{anchor|BlokeesIDWTrans}}
<ul class="iconlist">{{Bp-a1|'''IDW-Optimus Prime (Transparent Edition)''' (2025)}}</ul>
:*''Accessories:'' Pair of open hands, pair of wrist blasters, Ion Blaster

:A translucent redeco of ''GV 06'' Optimus Prime with an iridescent finish, coming pre-assembled in blister packaging. This figure had a run of 999 units, with the first 61 distributed at an event in Chengdu Station, China on June 1, 2025.

{{-}}{{anchor|GV08}}
[[File:Blokees-TF-GV08-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster

:The eighth wave of the ''Galaxy Version'' blind boxes features another new mold of Optimus Prime in a Generation 1-inspired look, but with a new set of outward forearm armor, and he only comes with his Ion Blaster. In addition to the ball-jointed waist from the previous entry, Optimus also features updated articulation, including a slide-down hip joint axis, rotating upper thigh joints, and improved double-jointed knee articulation, similar to his wave mates. This Optimus can also accommodate Sideswipe's backpack from the ''Shining Version'' line.

:Because the newly designed knee joints are made to fit the narrow gaps in the thighs and lower legs, they are incompatible with joints from previous releases, including those used for the elbows.

:If one chooses, Optimus' forearm armors can be omitted for greater accuracy.

:Along with the rest of the wavemates, Optimus is first revealed at Blokees' booth at the IBTE 2025 (Indonesia International Baby Products & Toys Expo) event.

{{-}}{{anchor|GV08Hidden}}
[[File:Blokees-TF-GV08-Optimus-Prime-Hidden.jpg|thumb|250px|Thanks for helping me... pull myself together...''I guess.'']]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hidden Style)''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, half-dead chest plate, metal splinter

:The chase figure of ''Galaxy Version'' 08, with the standard chase odds of 1 in every 36 boxes, this kit of Optimus Prime is a redeco of the regular kit above in metallic paint and molded plastic, featuring a "half-alive, half-dead" appearance. In addition to his identical accessories, Prime features an alternate front chest block with a gash that is compatible with the included metal splinter (referred to as an "Energon Axe"...okay.).

{{-}}
<ul class="iconlist">{{Bp-a1|'''Metroplex''' (Galaxy Version, 2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''

:The ''Galaxy Version'' Metroplex kit comes with a non-poseable figurine (and obviously out of scale) of Optimus Prime, and he can be pegged onto one of his open-palm hands. As he was molded from merely dark gray plastic, he can be painted in full color (or onto any of the other characters that share his appearance) if you wish.

{{-}}

===Shining Version===
{{Anchor|Shining Version}}
[[File:Blokees-TF-Shining-Version-01-Shining-Roll-Out-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 01 - Shining Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (weapon-holding, splayed), ion blaster, Energon Axe, Matrix of Leadership with support stand, holdable Autobot and Decepticon insignias

:Released in the first wave of Blokees' ''Shining Version'' line, this version of the ''Galaxy Version'' Optimus kit now features painted translucent face and chest parts, and a torso frame that lights up upon shaking (or at least just lightly tap some areas on the torso), causing the eyes and the Matrix pattern tampographed on his chest window to glow for a limited time. In addition to his identical accessories from the Galaxy Version release, Optimus also comes with a single Energon Cube, a separate Matrix with a support stand, and a new, larger figure stand.

:The Matrix features a pair of tabs on each handle, compatible with most ''Galaxy/Shining Version'' kits that include open-palm hands, not just Prime.
{{-}}{{anchor|BlokeesG1Toy}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:The second wave of the ''Shining Version'' series introduced a second Optimus Prime mold styled after his [[Optimus Prime (G1)/toys#The Transformers|original Generation 1 toy]], complete with an ion blaster modeled after it. As with the first ''Galaxy Version'' kit, this Optimus can accommodate Sideswipe's backpack from the ''Shining Version'' line.

{{-}}{{anchor|BlokeesG1ToyMetallic}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (Shining Version, 2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:This chase variant of the above toy-style mold is, like the ''Galaxy Version'', redecoed into metallic colors along with more toy-accurate tampographs and retains the same accessories. The eye and window pieces are now molded with orange-ish red translucent plastic instead of blue.

{{-}}{{anchor|ShiningPax}}
[[File:Blokees-TF-Shining-Version-03-Orion-Pax.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' ([[2025]])}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' 2 pairs of hands (fists/accessory-holding, splayed open-palm), Gun, figure stand

:The third wave of the ''Shining Version'' series introduced a new mold styled after his Orion Pax appearance in ''IDW Publishing'''s "Spotlight Orion Pax" comic. As with later Galaxy Version kits since Wave 5, Orion features sturdier pre-assembled hinge joints.

:Since Orion's chin is slightly too long, fully inserting the ball joint may cause his head to ''slightly'' look upwards. To prevent this, insert the ball joint into Orion's head socket first, and then attach it to the torso frame's peg hole until you feel the friction between the joint and the hole without fully inserting it.

:If you're a speed builder, be mindful when attaching the pre-assembled joints; Unlike the symmetrical joints from earlier waves, the pegs on both ends of these joints are designed to connect to specific pieces; The tabs with slightly smaller holes are intended for the upper arms and thighs, while the regular tabs are meant for the forearms and lower legs. While an incorrect knee joint assembly may cause it to very slightly lean when standing straight or in an A-stance, an incorrect elbow assembly won't be noticeably affected unless you're looking very closely.

{{-}}

===Box Sets===
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Exclusive-Yearly-Version).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon''' (2024)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, Energon Axe, Matrix of Leadership with support stand, figure stand, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:This special edition box set included [[Electrum]]-inspired gold redecoes of ''Shining Version'' (See above) Optimus Prime as well as [[Prowl (G1)/toys#Exclusive Yearly Version|Prowl]], [[Ironhide (G1)/toys#Exclusive Yearly Version|Ironhide]], [[Long Haul (G1)/toys#Exclusive Yearly Version|Long Haul]], and [[Starscream (G1)/merchandise#Exclusive Yearly Version|Starscream]], where they also receive translucent redecoes of face and chest parts painted on.

:As with the rest of his pack-in mates in this set, Optimus suffers from a case of [[Gold Plastic Syndrome]], as his molded gold hinge joints can potentially snap off due to the swirly plastic.

{{-}}
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Yearly-Version-Set-2-Optimus-Prime-(G1-Toy).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon - Defence''' (2025)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, figure stand, blast effect, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:The 2025 Yearly Version box set now features an Electrum-inspired redeco of the toy-based ''Shining Version'' Optimus Prime kit. In addition to the identical accessories, he also comes with two additional impact effects for the figure stand.

:Like the rest of this box set's kits, Optimus' hinge joints are now molded in a more mustard yellow-ish plastic, reducing the Gold Plastic Syndrome-related issue plagued from the previous release.

{{-}}

===Action Edition===
[[File:Blokees-TF-Action-Edition-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Action Edition, 2024)}}</ul>
:*Accessories: Ion Blaster, Energon-Axe, Jetpack, Wrist Communicator, Holomatter avatar, Matrix of Leadership, Index finger parts (Fist, Pointing, Trigger-finger), display stand with magnet-powered faction symbol block

:The "Action Edition" Optimus Prime is a 7-inch (approx 18cm) model kit with a slightly more complex build and features an inner frame (equivalent to the ones used for ''Bandai'''s "Master/Perfect/Real Grade" kits) with greater articulation points than his other ''Galaxy Version'' toys. In addition to his two signature weapons, the removable Matrix of Leadership, and the jetpack, Optimus also comes with a hologram readout and wrist comm pieces to attach to the left forearm, with each of those parts featuring two different types of stickers. The articulated hands also feature two additional index fingers, a straight pointing piece, and a slightly curved piece for the Ion Blaster's trigger. A magnetic component in his display stand's faction symbol activates the light-up features that illuminate his eyes and the Matrix. An additional sticker sheet and extra yellow-colored eye parts can be used to create a toy-accurate version of this kit.

:If one chooses, the middle-to-pinky fingers ''can'' be (carefully) sliced into individual pieces as they also feature individual ball joints for each finger.

{{-}}

===Defender Version===
{{Note|Every case before the 5th wave comes with a random Commemorative Card, with 10 Common, 1 Gold, and 1 Silver for each out of every 12 cards.}}
{{anchor|DefenderTruck}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-truck.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Vehicle''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''

:Released as part of the first ''Defender Version'' line of blind boxes, this ''Blokees'' kit of Optimus Prime is molded in his truck mode. The trailer hitch also comes with the Auto-Launcher from the Combat Deck, where it can be extended and wielded by other figures from the same line, allowing them to ride Optimus like an adorable little scooter. The Auto-Launcher can be detached from the bar, allowing the figure to be displayed as a regular-looking truck.

:The Combat Deck/Trailer and the Roller from the 5th wave can accommodate this kit, with the Auto-Launcher able to be mounted inside the trailer.

:This mold was also used to make [[Optimus_Prime_(SG)#SGDefenderVehicle|his Shattered Glass counterpart]].

{{-}}{{anchor|DefenderRobot}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-robot.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:This ''Defender Version'' kit of Optimus Prime is a 2.2-inch (5.5cm) figure, a few inches smaller than the ''Galaxy Version'' kits, but still articulated. Unlike his ''Galaxy Version'' kit, Optimus only comes with an Ion Blaster.

:Like most of the larger Galaxy Version kits, Optimus features a simple neck joint that is colored to match his optics, allowing it to be see-through from his head's eye holes. This mold was also used to make [[Ultra_Magnus_(G1)/merchandise#Defender_Version|Ultra Magnus]] and [[Optimus_Prime_(SG)#Defender_Version|Prime's Shattered Glass counterpart]].

{{-}}{{Anchor|SpecialGalaxyType}}
[[File:Blokees-TF-Defender-Ver-01-Special-Galaxy-Type-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Special Galaxy Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:One of the four chase figures of the line, the "Special Galaxy Type" Optimus Prime is a metallic redeco of the figure above, and he also features additional details to make him more accurate to the show. One chase variant is guaranteed per case, meaning this Optimus appears in five out of every twelve cases.

{{-}}{{Anchor|SpecialArmorType}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-100%-Firepower.jpg|thumb|250px|All of these armaments and yet he insists on crippling the 'Cons' joints without destroying them.]]
<ul class="iconlist">{{Bp-a1|'''Special Armor Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster, Forearm cannon, Wing pack

:The "Special Armor Type" version of the Optimus Prime kit is an alternate version of the Special Galaxy Type chase figure, decked out in metallic paint, and comes with additional armaments such as the forearm cannon and a wing pack that is based on the one used by his ''Cybertron'' namesake. Unlike the chase variant above, this Optimus has an '''''even''''' slimmer pull rate of '''1''' in every 144 boxes, or once per twelve cases.

{{-}}{{anchor|DV05Brilliant}}
[[File:Blokees-TF-DV05-SG-Brilliant-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Brilliant Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 05 - Traitor to Tyranny'''
:*''Accessories'': Energon Axe

:The fifth wave for the Defender Version kit comes with a translucent redeco of Optimus Prime, whose Ion Blaster is replaced with an Energon Axe. Additionally, he comes with one of the three random plastic commemorative coins (featuring etchings of Jetfire's head, Galvatron's head, and Jetfire's vehicle mode) in every case that contains the kit. Each coin is molded from translucent plastic and features a gradient pattern painted with gold.

:As with other clear-colored Brilliant/Glittering kits, the translucent plastic-molded ball-and-socket joints tend to be somewhat loose even when it's built out of the box, compared to the opaque and metallic kits.

{{-}}
===Blokees Wheels===
{{Note| Due to licensing-related reasons, this blind-box line was not released in the US market.}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''

:This 1/64-scale vehicle kit of Optimus Prime's truck mode is part of the new ''Blokees Wheels'' series of blind-boxed ''Transformers'' products. The design is based on Don Figueroa's interpretation of the character's Cybertronian truck mode, as seen in IDW's 2009 -2011 ongoing series. While everything else is molded in ABS plastic, the primary vehicle shell is made out of painted die-cast. Additionally, Optimus Prime features a universal Chassis Connector, which is used by all vehicle mode kits in the lineup, and the vehicle shell is capable of being opened for the chase kits' driver figures to interact with.

:This Optimus Prime has a pull rate of 1/24.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hologram Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with a slim pull rate of 5/144, the "Hologram Edition" Optimus Prime is a translucent redeco of the kit above. It includes an additional translucent blue driver minifigure, which is also designed to fit in the other vehicle kits.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Titanium Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with the slimmest pull rate of 1/144, the "Titanium Edition" Optimus Prime is a metallic redeco of the original kit, and he comes with the same driver figure from the Hologram Edition release of the kit.

{{--}}

==Combot==
[[File:Unix-Square-Combot-Optimus-Prime.jpg|thumb|300px|Autobots, Transf-I mean, Partsform and roll out!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories:'' 5 pairs of hands, Ion Blaster, Energon Axe, Energon Sword/Blaster Bayonet, Vehicle mode frame

:Produced by [[Unix Square]], a toy company based in Hong Kong, [[Combot]] Optimus Prime is an action figure approximately the size of a Voyager Class figure, and he features an impressive 50 points of articulation and includes a hefty amount of die-cast metal for a weighty premium feel, and light-up features for both the eyes and the Matrix of Leadership. In addition to his iconic Ion Blaster, Optimus also comes with a handheld Energon Axe and a live-action movie-inspired Energon Sword. The sword can also combine with the Ion Blaster to create a Bayonet.

:As the LED unit is wired on the neck, Optimus's head cannot swivel in a full 360 degrees.

:Unlike most non-Hasbro/Takara merchandise of the character on this page, Combot Optimus Prime can transform—albeit loosely defined due to licensing restrictions—into a stylized cab-over using full partsforming, while requiring the included vehicle mode frame.

{{-}}

==Auldey==
{{Note|All releases come with their respective trading cards.}}
[[File:Auldey-TF-AAE-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-001'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Optimus Prime is a 5-inch non-transforming but highly articulated action figure, and he comes with his additional pairs of hands and his signature ion blaster. Prime also features a removable chest window piece, which reveals an empty cavity for a future Matrix of Leadership accessory.

:As advertised in the box, the lineup had an 11/70 probability of getting Prime. This mold was also used to make [[Nemesis Prime (G1)#Auldey|Nemesis Prime]].

{{-}}{{anchor|auldeymetallic}}
[[File:Auldey-TF-AAE-Optimus-Prime-(Metallic).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Metallic Color)''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-000'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:The chase figure of the first lineup with a much slimmer 1/72 probability, this Optimus Prime is a redeco and retool of the figure above, featuring a toy-based deco and parts such as the head and legs. In addition, Prime also comes with a sheet of customer-applied stickers to complete the rest of his toy-accurate details, which include the chrome yellow-gold areas on his front hip.

{{-}}{{anchor|auldeyoptimal}}
[[File:Auldey-TF-AAE-Select-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Optimal Set''' (Alpha Action Elite Select, 2025)}}</ul>
:*''ID Number'': '''AAE-S 001'''
:*''Accessories:'' 16 pairs of hands, Ion Blaster, Energon Axe, Matrix of Leadership, Jet pack (with Blast effects), 2 pairs of alternate communication panels, display stand
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of Auldey's non-blindboxed "''Alpha Action Elite Select (AAE-S)''", a subline that also features re-releases of previous figures with more accessories and premium details, ''AAE-S'' Optimus Prime is a redeco and retool of the original AAE blindboxed figure. Deco-wise, Optimus features metallic paint on the red and blue plastic, along with some metallic silver details. He also comes with additional accessories, such as the Energon Axe, Megatron's pistol form, a jetpack with two Blast effects (also compatible with the Ion Blaster), an additional pair of interchangeable communication panels, and four extra pairs of hands that need trimming from their runners. Additionally, Optimus includes retooled areas and newly molded parts, such as a new neck joint that allows him to look up further, an opening chest window that grants access to his Matrix Chamber, and a display stand with an adjustable posing arm that plugs into multiple holes on his back and the soles of his feet for midair action poses.

:Optimus is also compatible with the Seeker-based back and the head from the same entry's Starscream, recreating the latter's disguise in [[Megatron's Master Plan, Part 1]].

{{--}}

==Ty==
* '''Beanie Bouncer Optimus Prime ''' (2025)
[[File:Bouncer-op.jpg|thumb|200px|If we want to get technical, this is actually [[Diac]].]]

:A bouncing ball covered in fur produced by Ty, creator of the more famous Beanie Babies and Beanie Boos. Optimus Prime's head crests are represented by additoinal pieces of felt material coming out of the ball. Opposite the face is an autobot symbol.

:Opitmus Prime is also available in a three set alongside Megatron and Bumblebee.

{{--}}

==Spin Master==
* '''4D Build Innovation Series Optimus Prime''' (2025)
[[File:Op-spin-master-4d.jpg|thumb|200px]]

:A puzzle made of cardboard, with LED Lights, from the 4d Build Innovation Series. Optimus is depicted holding his ion blaster and staring off into the distance. It was initially spotted in [[Costco]] stores in Fall of 2025.

:There are two releases; one, released online at 321 pieces, contains just Optimus's robot mode. Another, available at [[Costco]] stores, contains an additiona 99 pieces, used to build its truck mode.

{{--}}

==References==
{{reflist}}
{{-}}
[[Category:Attacktix]]
[[Category:Combiners]]
[[Category:Decoys]]
[[Category:Generation 1 Autobots]]
[[Category:MyClone]]
[[Category:Robot Heroes]]
[[Category:Titanium Series]]
[[Category:Bitfig]]
[[Category:ULTIMATES!]]
[[Category:Transformers Character Card Autobots]]

Optimus Prime (G1)/merchandise

2025-10-30T00:30:49Z

Leia G: went to the title that's actually on the box

{{suite}}

'''Optimus Prime''' is a bit of a shill.
==Stamp Bot==
[[File:OptimusPrime-StampBot-1984.JPG|thumb|Truck stamp is cool!]]
*'''Optimus Prime''' (1984)
:Made by [[HG Toys]], Stamp Bot Optimus Prime is a small, non-poseable figurine of Optimus Prime based on his toy with a rubber stamp on the base, and a cap with a felt "floor" that was soaked in ink. The stamp made an image of Optimus Prime's cab mode.
{{-}}

==The Transformers Cookie Jar==
*'''The Transformers Cookie Jar''' (1984?)
:A ceramic cookie jar in the likeness of Optimus Prime's head. The top of Prime's head lifts off for the storage of delicious baked goods or Energon or what-have-you. The cookie jar was manufactured by [[Great American Housewares]] under license from [[Hasbro]].
::*''[http://www.tfw2005.com/boards/transformers-toy-discussion/179468-optimus-prime-cookie-jar-price-check.html Images of The Transformers Cookie Jar at TFW2005]''
{{-}}

==Collegeville Costumes==
{{anchor|CollegevilleG1}}
*'''Optimus Prime''' (1984)
:Although [[Collegeville Costumes]] only released a small number of Transformers [[Halloween]] costumes, and made some odd choices for characters to depict in the process, Optimus Prime was an obvious choice as one of their first releases. The costume consists of a thin plastic facemask based directly on the Optimus toy's head complete with yellow eyes, and an orange and yellow plastic smock decorated not with the details of Optimus' body, but with his package art and the Transformers logo.

*'''Optimus Prime''' (1993)
{{anchor|CollegevilleG2}}
:Optimus Prime recieved a second costume from Collegeville for their line of ''[[Transformers: Generation 2 (franchise)|Transformers: Generation 2]]'' line. As with the 1984 Collegeville costume, it consists of a thin plastic mask held on by elastic. Unlike the previous costume, the plastic smock is now decorated with the details of Optimus' G2 body, as well as having his name and the G2 logo on it.
{{-}}

==Vehicle Play Tent==
[[File:Vehicleplaytent.jpg|thumb|Both a big truck ''and'' a series of tubes.]]
*'''ERO''' (1984?)
:The Vehicle Play Tent was part of the deluge of Transformers merchandise in the 80s. The tent was constructed by means of a series of plastic tubes that fit into sockets on corner pieces (similar to the "k'nex" building system that arrived a few years later), then a vinyl cover was slipped over this PVC skeleton to make the tent.
{{-}}

==Oral Care Station==
*'''Optimus Prime Oral Care Station''' (1984/85?)
:An electric toothbrush in the likeness of Optimus Prime. A battery-operated feature causes the toothbrush (attached at Prime's left wrist) to move back and forth. The set also included a cup for [[water]], an extra brush head, and a stand to hold the various accoutrements.
::*''[https://www.flickr.com/photos/14985789@N07/3207711517/?rb=1 Image at Flickr.com]
::*''[http://fredsworkshop.com/oral.html Images of the Oral Care Station in-box at FredsWorkshop.com]''
{{-}}

==Transformers Milk Caramel==
[[File:Tfcaramel optimus prime.jpg|thumb|upright=1.66|Note: Do not eat! ... the candy. The toys taste better.]]
*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A small soft-rubber figurine (known as a ''keshigomu'' in Japan) of Optimus Prime was released as part of [[Kabaya]]'s line of ''[[Transformers Milk Caramel]]'' [[candy toy]]s. Like all the figures from the 1985 range, Prime came blindpacked, and was available in a variety of colors including white, blue, yellow, green and orange. As the name of the series suggests, he came with a piece of caramel candy.

*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A second Optimus Prime ''keshigomu'' was included in the second wave of ''Milk Caramel'' figures, sporting some broader proportions and more toy-based design cues like visible wheels, holding its gun in its left hand, rather than its right. This figure was available in red, yellow and blue variations; a baffling variant is known to exist with a ''Decepticon'' symbol on its left shoulder!

*'''Convoy''' (1985)
**''ID number:'' '''2'''
:The second ''Milk Caramel'' wave also contained a third Optimus Prime figure, largely identical to the second, except with its gun in its right hand, and holding its left arm aloft. Again, this figure was available in red, yellow and blue variations.
{{-}}

==Transformers Choco==
[[File:Tfchoco optimusprime.jpg|thumb]]
*'''Convoy''' (1985)
:A small solid-color snap-together model kit of Optimus Prime was released by Kabaya as part of their ''[[Transformers Choco]]'' line, coming packaged with small chocolate candies similar to [[M&M's]] called "Chocolate Dots". The kit can transform from robot to vehicle mode, though this version of Prime doesn't have any hands.

*'''Convoy''' (1985)
**''Accessories:'' Two fists
:A second ''Choco'' version of Prime was upsized from the first a little, and was given a pair of removable fists, the right one clutching Prime's [[ion blaster]].
{{-}}

==Transformers Gum==
[[File:Tfgum optimusprime.jpg|thumb|upright=1.66]]
*'''Convoy''' (1985, 1997)
**''Accessories:'' Two fists, ion blaster
:In addition to the small ''Choco'' model kit, Kabaya also released a larger version of Prime under their ''[[Transformers Gum]]'' line. Essentially a downsized version of the original Prime toy (sans trailer), the kit is sculpted from black, red, and grey plastic, features stickers rather than paint applications for details, and came with a stick of gum.

:This kit was reissued in 1997 by might-or-might-not-be official Transformers licensee [[ToonTown]] in [[South Korea]] (possibly, in a 2-pack with a reissue of ''Transformers Gum'' [[Soundwave (G1)/merchandise#Transformers Gum|Soundwave]] <ref>[http://fuwakudou.web.fc2.com/prisoners06.html One source] mentions obtaining two boxes of the ToonTown ''Transformers Gum'' releases with each containing two kits - the one numbered #1 featuring Optimus Prime and Soundwave and the one numbered #2 featuring Sideswipe and Starscream - but considering that none of the other (albeit admittedly very few) sources that discuss these kits mention a similar arrangement, it is possible that this was either a packing mistake or simply already-opened boxes being sold on the secondary market with two loose kits stuffed into them (the article does not specify whether or not the boxes they obtained were sealed, although they do look new-ish in the provided pictures). Still, considering how very little information exists regarding these releases in general, it will nonetheless be noted here that these kits ''might'' have been released as 2-packs at some point.</ref>), looking mostly identical save for a set of cheaper-looking paper decals.
{{-}}

[[File:Tfgum2010 g1prime.jpg|thumb|upright=1.66|My limbs need to be horribly mutilated and rearranged to change forms!]]
*'''Convoy''' (2010)
**''Accessories:'' Ion blaster
:The first wave of 2010's revival of the ''Transformers Gum'' series served up a double dose of Prime, beginning with this new model kit of the original Generation 1 version of the character. Sculpted from white, red, and blue plastic, the kit features a positively ''ungodly'' amount of stickers to make it look presentable and comes with Prime's traditional ion blaster weapon, which stores on the rear of his cab in vehicle mode.

:In terms of transformation, Convoy partially [[partformer|partforms]], as the forearms are needed to be removed and attach it back during conversion.
{{-}}

[[File:Tfgum2010 henkei prime.jpg|thumb|upright=1.66|So do mine!]]
*'''Convoy''' (2010)
**''Accessories:'' Smokestacks/laser cannon
{{toydesigner|[[Naoto Tsushima]] (packaging artist)}}

:The second Prime figure in the 2010 ''Gum'' line was this kit of his ''[[Transformers: Classics|Classics]]''/''[[Henkei! Henkei! Transformers (franchise)|Henkei! Henkei!]]'' body. As with the Generation 1 model, this figure is made from white, red and blue plastic and uses ''lots'' of stickers. It comes with the ''Classics''' figure's transforming smokestack/laser cannon weapon.

:Much like his aforementioned G1 self, his arms also need to be partformed into robot mode.
{{-}}

[[File:Tfgum2014_g1starconvoy.jpg|thumb|upright=1.66|But not mine!]]
*'''Star Convoy''' (2014)
**''Accessories:'' Cannon, Roller/ treads, car mode Hot Rodimus

:Released as part of the 8th wave of Kabaya's 2009 series of standard model kits, Star Convoy is a snap-together model kit that can transform into a futuristic big rig. Like the full-sized Star Convoy toy, this model kit can assume a battle station mode and also includes a diminutive and non-transformable Hot Rodimus in car mode that can interact with the base mode ramps. Like most other Kabaya model kits, Star Convoy has no paint applications and relies on stickers for added details.

:Owing to the original toy's simple engineering, Star Convoy does not require any disassembly to transform into robot mode, making him one of the few non-partforming Kabaya figures. He does, however, need to have his Microcarrier wheel base detached (which was also an option on the original toy) to fully access a significant improvement over his older self: some newly-added leg articulation! The Microcarrier also doubles as a shield that can be attached to the robot's left arm.
{{-}}

==Hero Set==
*'''Convoy''' (1985)
**''ID number:'' '''01'''
**''Accessories:'' Laser rifle
:A large ''keshigomu'' of Optimus Prime was produced by TakaraTomy licensee [[Maruka Toys]]. Packaged on a blister card, the static, unposeable Prime figure came with a removable laser rifle, and featured a few small stickers for colour and detail. Maruka also produced a Megatron figure in the same scale, and both Prime and he were available in red, yellow or green.
{{-}}

==Decoy==
[[File:Decoy optimus prime.jpg|thumb]]
*'''Cybertron Hero Collection 22''' (multi-pack, 1986)
*'''Defeat Trypticon Strategy Game''' (board game, 1986)
:Optimus Prime was among the many characters rendered by [[TakaraTomy|Takara]] as part of their series of 1.5" ''keshigomu'' figurines. Like all the Autobots in the series, Prime was molded in soft red rubber, and featured a number sculpted into his back that was the sum total of his [[Tech Spec]]s, for use in the various games that could be played with the figurines. Prime was available as part of a 22-piece box set of Autobot figures, as a playing piece in the Defeat Trypticon Strategy Game, and later, in a peach coloration randomly packed as part of various other box sets.

*'''Optimus Prime''' (1987)
**''Checklist number:'' '''31'''
:The Prime figurine was later brought over to [[Hasbro]] markets as part of the "[[Decoy (G1)|Decoy]]" promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (31, in Prime's case). Like all Autobot Decoys, he was a randomly-chosen pack-in available with the carded [[Throttlebot]]s, [[Aerialbot (G1)|Aerialbots]], [[Protectobot (G1)|Protectobots]] and [[Technobot (G1)|Technobots]].

::*''[http://www.tfu.info/1986/Autobot/Decoys/OptimusPrime/optimusprime.htm More information on Decoy Optimus Prime at TFU.info]''
{{-}}

==Knitting Pattern==
[[File:Transformers-knitting-pattern.JPG|thumb|Here to transform your sweater into something that will get your ass kicked.]]
*'''Wendy DK 3015''' (1986)
: Produced by U.K. company [[Wendy DK]] and designed by [[Joy Gammon]], this pamphlet contained patterns for two ''Transformers''-themed sweaters, one featuring Optimus Prime in robot mode, one featuring Optimus Prime in vehicle mode. The patterns were sized as Children's Large, so you're going to have to upscale it quite a bit if you want your <s>girlfriend</s> mom to knit you one.
{{-}}

==Vinyl figurine==
[[File:Optimus Prime Vinyl Figure set.jpg|thumb|upright=1.66|Vinyl Prime leads his decoys into battle [[Action Master|before the great storm]].]]
*'''Scramble Gun Set''' (1986)
**''Japanese ID number:'' '''Part.1'''
:Optimus Prime was one of several characters released by [[Seven]] and Takara as large vinyl figurines in a variety of different novelty sets. Prime came packaged with a roleplay pistol (the titular "Scramble Gun"), an Autobot badge, and four randomly assigned peach-colored decoy figures. In [[Ultra Magnus (G1)/merchandise#Vinyl figurine|"Part.2"]] of the set Prime is replaced by a vinyl Ultra Magnus.{{-}}

==Gold Convoy Trophy==
[[File:Gold Convoy Trophy.jpg|thumb|Thou will worship this golden convoy. Or Perish!]]
*'''Optimus Prime''' (trophy, 1988)
:A gold chrome trophy in the likeness of Optimus Prime was given as an award to an unknown number of distinguished [[TakaraTomy|Takara]] employees and as a [[Lucky Draw figure|Lucky Draw]] (alongside the [[Chromedome (G1)|Silver Chromedome Trophy]]) in [[TV Magazine]] in 1988. The two different releases have different plaques but appear to be otherwise identical. If you're an Optimus Prime merchandise completist, good bloody luck finding this one.
{{-}}

==''Generation 2''==
*'''Optimus Prime''' (Dairy Queen promotion, 1994)
[[File:DairyQueen Optimus.jpg|thumb|Rare, in a raw chicken sort of way.]]
:Released in Dairy Queen's 'Kid's Pick-Nic!' meals in 1994, this hunk of red and blue plastic is the first known Optimus Prime kids' meal toy and also probably the worst, sporting no transformation and zero articulation of any sort, with an included sticker sheet for detailing that doesn't particularly resemble any iteration of the character.

:These can be pretty hard to find, owing to their limited distribution compared to the average fast food promotion. Being pretty forgettable as toys probably didn't help either, if we're being honest.
{{-}}

*'''Optimus Prime Inflatable Bop Bag'''
[[File:OptimusPrime_G2_Inflatable_Bop_Bag.jpg|thumb|At last, merchandise for Decepticons!]]
:Released in 1993 by Kid Dimension, a subsidiary of Hasbro,<ref>[http://www.fundinguniverse.com/company-histories/hasbro-inc-history/]</ref> this 3 foot tall Inflatable Bop Bag featured the likeness of Optimus Prime above the Transformers Generation 2 logo. Supposedly to encourage kids to punch out Optimus Prime?
{{-}}

===ToonTown===
{{note|There's a longstanding debate on whether the obscure Korean-exclusive [[ToonTown]] figures and merchandise, allegedly released under official Hasbro licensing according to their packaging, are actually legitimate Transformers products or just bootlegs with fraudulent copyright information. Although there isn't a clear consensus from collectors and no statement from Hasbro on this matter as of {{CURRENTYEAR}}, we have nonetheless chosen to cover them here for the sake of archival and posterity.}}

[[File:Midam-Prime.jpg|thumb|upright=1.66|Maybe a licensed product, maybe a bootleg. Maybe it's in our definition of "toy," maybe it's "merchandise." ToonTown needs a {{w|Eddie Valiant|detective}}!]]
{{anchor|MidamIndustry}}
<ul class="iconlist">{{Bp-a2|'''Optimus Prime''' (Model kit, 1997)}}</ul>
:*''Accessories'': Blaster, left & right fists
: Notoriously odd [[South Korea]]n company ToonTown licensed the ''Transformers'' brand to model kit manufacturer [[ToonTown#Items released by Midam Industry|Midam Industry]], which in turn put out this surprisingly detailed and robust kit of the original Generation 1 Optimus Prime figure. It is fully transformable and about 3/4ths the size of the original toy. He does not feature his trailer, and his weapon design is substantially different from either of his classic blasters.

: Three color morphs have been found so far: original red arms and torso with blue head and legs, a mirrored version with red head and legs and a blue torso and arms, and one with all the aforementioned parts in blue.<ref>Reviews for a [https://m.blog.naver.com/eoiipp/130144214329 "standard"-colored Midam Optimus kit], an [https://blog.naver.com/parang16/20041871808 "inverted"-colored Midam Optimus kit], and an [https://blog.naver.com/nckim/70101680088 all-blue-colored Midam Optimus kit] on blog.naver.com</ref> This suggests that the colors which make up the two batch of parts might be randomized between blue and red, and as such; an as-of-now undocumented all-red version might also exist. All of his versions also have their chrome parts painted in metallic gold, a common oddity across ToonTown Primes as seen in the previous LALA figure.

: The figure comes with a batch of rather weird stickers, with text on his license plate and the sides of his truck mode that refers to him as "[[gbwiki:Dump Robo|Dump Robo]]".
{{-}}

[[File:LALA-PrimePencilCase.jpg|upright=1.66|thumb|Pope Leo XIV might have been selected on the
day that this image was uploaded, but pencil case Optimus might be the holiest thing that I've seen all day, hahaha... I'm going to hell, aren't I?]]
*'''LALA Pencil Case''' (1997)
:Possibly one of the most majestically quirky pieces of merchandise to have graced any Transformers character ever, this incredible pencil case from ToonTown licensee [[ToonTown#Items released by LALA|LALA]] is generally based around the design and transformation of the original Generation 1 Optimus Prime toy, but with ''a lot'' more than meets the eye to it: on top of being fully transformable from his robot mode to (an albeit rather flat) truck mode, he folds open to reveal space for the storage of several pencils and/or pens of your choosing, as well as including printed stickers for a time table and an address book, a drawer for the storage of extra school supplies, and a hidden thermometer that's revealed by lowering his head!

:Pencils can be attached to his shoulders to imitate his smokestacks, and his fists, which are removable for the transformation like in the original toy? They're erasers! Gah, how can an obscure, maybe even potentially fake piece of merchandise from 1990s South Korea have this much soul and creativity put into it! The fists can even be stored below the truck's front portion in vehicle mode, guaranteeing that you never lose them.

:He also includes a sticker sheet and a small 20cm ruler, featuring packaging art of himself plus ''Generation 2'' [[Megatron (G1)|Megatron]], [[Sideswipe (G1)|Sideswipe]], and [[Ramjet (G1)|Ramjet]], as well as pictures of their respective LALA eraser versions (the one for Optimus coming right up).
{{-}}

*'''Eraser''' (1997)
:Another piece of merchandise from ToonTown licensee LALA, this eraser also doubles as a small simple model kit, with his large colored bits being the "eraser" portion and the remainder of the toy being constituted of grey plastic parts that are assembled together. He transforms from robot to vehicle and back by [[Partformer|partforming]] his individual components.

:Although the advertisements and aforementioned ruler (as well as the few copies that we know of) feature his eraser bits in pink, it is possible that he might have also been released in bright green, as other LILA erasers that also show up as pink in promotional images have been found with this color instead.
{{-}}
*'''Watch''' (1997)
:Yet another LALA product, this Optimus Prime watch "transforms" by folding out of its compressed half-form and standing up as a simple fully-fledged little robot. His chest opens to reveal the titular watch. Said chest, along with his head, have an unusual gold chrome deco (a commonality across a handful of ToonTown products), and the box art is painted accordingly to reflect this.
{{-}}

==''Metalforce''==
[[File:MetalforceConvoy.jpg|thumb|I'm expensive! ''(Metallic Version Pictured)'']]
*'''Convoy''' (1999/2000)
**''Japanese ID number:'' '''MFC-01'''
**''Accessories:'' Ion Blaster, Autobot Matrix of Leadership, alternate hand, unpainted rifle, Matrix, helmet and hand

:''Metalforce'' Convoy is a large vinyl figurine produced by [[Time House]] sculpted to very closely resemble Optimus Prime as he appeared in the original television series, and at the time was the most accurate product depiction of Optimus Prime's cartoon appearance.

:The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his [[Matrix of Leadership/toys|Matrix of Leadership]], as is a ''[[The Transformers: The Movie|Movie]]''-style Matrix cover (not pictured). He also comes with an alternate hand that allows him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands, and helmet, which probably meant for those who wanted to duplicate them with resin and/or wish to modify/paint them...you know how garage kit modellers do.

:Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colors of the actual series, and a metallic-paint version (pictured), which is less [[show-accuracy|show-accurate]] but more shiny. The plain-colors version was the first release and have an Autobot symbol tampograph on his shoulder as per [[The Transformers (cartoon)|the cartoon]], while the later metallic-finish version instead came with a decal sheet.

{{-}}

==''Choro-Q''==
*'''Convoy''' (2000)

:''[[Choro-Q]]'' Convoy is a [[redeco]] of the Domra Truck toy from Takara's ''Choro-Q'' toyline of non-transforming [[super deformed]] vehicles. He was an [[exclusive]] at [[BotCon]] Japan 2000, and features a [[pull-back motor]] and a rear license plate that reads "BotCon Japan 2000".

:Along with ''Choro-Q'' [[Mirage (G1)|Ligier]] and [[Megatron (G1)/toys|Megatron]], Convoy was given out randomly to convention attendees. Each toy was limited to 1000 pieces.

==Super Collection Figure==
[[File:SCF Optimus.jpg|upright=1.66|thumb|#IGotPrimeOnIt]]
*'''Convoy''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

: A three-inch tall [[plastic|PVC]] figurine of Optimus Prime was available as part of the first wave of [[TakaraTomy|Takara]]'s ''[[Heroes of Cybertron (toyline)|Super Collection Figure]]'' line. Like all the figures in the wave, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve [[blindpacking|blindpacked]] figures.

{{-}}{{anchor|SCFaxe}}
[[File:SCF Optimus chase axe.jpg|upright=1.66|thumb]]
*'''Convoy with Ax''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

:Also available in the first ''Super Collection Figure'' wave was a rare "Secret Figure" version of Optimus (斧付きコンボイ, ''ono-tsuki konboi''), decorated in metallic paint and replacing his gun-wielding right hand with his [[energon-axe]].

: It was ''presumably'' released at a ratio of one per every ten cases; while this has not been officially confirmed, later waves gave these odds for Secret Figures.

{{-}}{{anchor|SCFtrailer}}
[[File:SCF Optimus Truck.jpg|upright=1.66|thumb|We're just as confused as you are, folks.]]
*'''Convoy (Trailer Mode)''' (2000)
**''Act'': '''2'''

:Part of the second ''Super Collection Figure'' act, this is the only ''SCF'' figure of a vehicle mode Transformer. As with the previous non-chase Prime figure, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve blindpacked figures.

: Unlike every other figure in the line (excluding build-a-figures), this one does ''not'' come with a figure stand, because... well, what would be the point?

{{-}}{{anchor|SCFMegaGun}}
[[File:SCF Optimus chase jetpack.jpg|upright=1.66|thumb]]
*'''Megatron & Convoy''' (2000)
**''Act'': '''2'''
**''Accessories'': Stand

:The second ''Super Collection Figure'' wave, like the first, also had its own Optimus Prime chase figure, this one wielding Megatron in gun mode and wearing [[Sideswipe (G1)|Sideswipe]]'s [[jet pack|rocket pack]], as seen in the [[The Transformers (cartoon)|original ''The Transformers'' cartoon]] episode "[[More than Meets the Eye, Part 3]]".

: This was presumably also released at a ratio of one per every ten cases.

{{-}}{{anchor|SCFdamage}}
[[File:SCF Optimus chase damage.jpg|upright=1.66|thumb]]
*'''Damaged Convoy''' (2001)
**''Act'': '''3'''
**''Accessories'': Stand

:There was no mass-release Optimus Prime figure for the third ''Super Collection Figure'' act, but there was another rare chase figure, this time a battle-damaged version of the original figure from the first act, referencing his injuries from ''[[The Transformers: The Movie]]''.

: Again, it was ''probably'' released in one out of every ten cases. He replaced the clear version of [[Bumblebee (G1)/merchandise#Super Collection Figure|Bumblebee]] in the case.

{{-}}{{anchor|SCFcom}}
[[File:SCF Optimus Comm.jpg|upright=1.66|thumb|He's actually checking his makeup.]]
*'''Convoy (B)''' (2001)
**''Act'': '''4'''
**''Accessories'': Stand

:For the fourth ''Super Collection Figure'' wave, Prime was rendered weaponless, speaking into the open communication panel on his left arm. Like all the figures in the fourth wave, Prime was available in both standard full color and metallic silver "pewter" versions, one of each of which was available in a standard case of twelve blindpacked figures.

: Care should be taken when moving the joints of the pewter version, as is not uncommon for the connector pegs to have gotten painted as well, resulting in stuck limbs and tearing joints. Shaving the interior of the socket slightly with a hobby knife is usually sufficient to relieve the issue. (This holds true for all other pewter figures on this list, and in fact the entire dang line from here on.)

: In eight out of every ten cases, the pewter version of Prime came packaged with the left arm of the collectible [[Metroplex (G1)#Super Collection Figure|Metroplex]] build-a-figure; these parts were either in full color or clear-plastic, packed at an equal ratio of four out of eight cases.

{{-}}{{anchor|SCFSilverMatrix}}
[[File:SCF Optimus chase silver.jpg|upright=1.66|thumb]]
*'''Convoy''' (2001)
**''Act'': '''5'''
**''Accessories'': Stand

:This version of Prime was a chase figure in the fifth ''Super Collection Figure'' act, and depicts the Autobot leader, rendered in metallic silver, opening the Matrix, referencing the end of "[[The Return of Optimus Prime, Part 2]]". This figure was packed in at a ''confirmed'' ratio of one per every ten cases.

{{-}}{{anchor|SCFMegatrongun}}
[[File:SCF Optimus Act6.jpg|upright=1.66|thumb|Shadow the Convoy, ow the edge.]]
*'''Convoy (C) with Megatron Gun Mode''' (2002)
**''Act'': '''6'''
**''Accessories'': Extra right fist, stand

:The sixth ''Super Collection Figure'' wave featured yet another mass-release version of Optimus. While this Optimus is wielding Megatron (using the same mold as the chase figure from the second Act), he has entirely new-mold arms, plus an interchangeable empty right fist. On top of that he was extensively redecoed: he's actually cast in different shades of light salmon plastic and heavily painted over in an overall darker, less saturated scheme, his normally-white parts now in medium-gray. His pec-windows are painted with a weird shiny dark blue that gives them a translucent look. The figure was available in both full color and pewter versions in an equal ratio.

: In eight out of every ten cases, the pewter version came with the head for the wave's [[Grand Maximus#Super Collection Figure|Grand Maximus]] build-a-figure, packed at a ratio of six color parts to two pewter per case.

{{-}}{{anchor|SCFStarConvoy}}
[[File:SCF Optimus Star Convoy.jpg|upright=1.66|thumb|Chonktimus Prime.]]
*'''Star Convoy''' (2002)
**''Act'': '''8'''
**''Accessories'': Stand

:After taking a break for the seventh wave, Prime returned for the eighth ''Super Collection Figure'' wave, which would prove to be the final Generation 1-themed set of figures. This figure of Prime in his Star Convoy body was available in both full color and pewter versions in an equal ratio.

:In eight out of every ten cases, the colored version came with the right arm for the wave's [[Scorponok (G1)#Super Collection Figure|Scorponok]] build-a-figure; this part could be in either full color or pewter, at a 4:4 ratio.

{{-}}{{anchor|ConvoySet}}
[[File:SCF Optimus Earth Obliteration.jpg|thumb|upright=1.66]]
*'''Special "The Earth Obliteration Plan": Exclusive Convoy Set''' ([[February 3|Feb 3]] 2002)
**''Accessories'': Stand

:Available exclusively at the Wonder Festival convention, this set includes two metallic-paint versions of Convoy figures from Act 2: the "Convoy w/ Megatron Gun" chase figure (minus the jetpack), and the truck-mode "figure".

: The set was limited to only 1000 units.

{{-}}{{anchor|ConfrontationSet}}
[[File:SCF Optimus Confrontation.jpg|thumb|upright=1.66]]
*'''TF Confrontation Set 01: Convoy vs Megatron''' ([[September 20|Sept 20]]-[[September 22|22]], 2002)
**''Accessories:'' Energon-axe

: Exclusive to the Tokyo Game Show 2002, this special set includes a new version of the original first-Act Optimus Prime figure, along with a new version of the first-Act Megatron. Both are cast in transparent plastic and completely painted over in a grimy, battle-damaged look. Both also come with the interchangeable energon-axe and mace weapons from their first-wave chase figures. Completing the theme of the set is the backdrop of the packaging interior, which depicts [[Sherman Dam]].

: Curiously, Optimus features the larger, rounded-off antennae of the [[Hasbro]] ''Heroes of Cybertron'' version of the mold, which was in production/circulation about the same time.

: As with the above Wonder Festival set, this set was also limited to 1000 units.
{{-}}
==Mega Super Collection Figure==
{{anchor|MSCF}}
*'''Convoy TV Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
*'''Convoy Metallic Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
{{-}}

==''Heroes of Cybertron''==
[[File:HOC Optimus.jpg|upright=1.66|thumb|Hey Spike, pull my finger.]]
*'''Optimus Prime''' (2002/2006)

: Part of the first wave of Hasbro's ''[[Heroes of Cybertron (toyline)#Heroes of Cybertron|Heroes of Cybertron]]'' series, Optimus is a [[redeco]] of the standard ''Super Collection Figure'' Optimus mold, with a ''slight'' [[retool]]ing to give him longer, thicker, rounded-off helmet antennae [[for safety reasons]]. Like all the standard ''Heroes'' figures, he is cast in transparent plastic, then painted over, save for the eyes and a small patch on the back of his head, giving him a [[light-piping]] gimmick. There are a few other small deco differences to the ''Heroes'' version, such as his helmet crest changing from white to gray.

: Optimus was re-released in 2006 as part of a short-lived ''Heroes of Cybertron'' revival, celebrating the 2006 DVD release of the original ''[[The Transformers: The Movie]]''. Cast in solid-white plastic rather than translucent blue, this makes him ''very'' similar to the original ''SCF'' toy, but he retained the thicker antennae, plus got some very minor paint changes on the head: his crest-vent went back to white, and oddly his eyes are white too, rather than the ''SCF'' version's chest-window light blue.

::*''[http://www.tfu.info/2002/Autobot/HoCOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime at TFU.info]''

{{-}}{{anchor|HOCApex}}
[[File:HOC Optimus Apex.jpg|upright=1.66|thumb|Don't tell anyone, but this crap is HEAVY!]]
*'''Powermaster Optimus Prime Apex Armor''' (2002)

: An unexpected addition to the line, especially in the first wave next to another Optimus (see above), "Apex Armor" Optimus is a [[redeco]] of [[Ginrai (robot)#Super Collection Figure|God Ginrai]], the double-armored-up form of Optimus's ''[[Fight! Super Robot Lifeform Transformers (franchise)|Super-God Masterforce]]'' lookalike [[Ginrai (robot)|Ginrai]]. There are a few small paint differences between God Ginrai and Apex Armor Prime (beyond the obvious "opaque vs clear-plastic base figure" thing, we mean), most notably that the many parts on God Ginrai that are darker unpainted gray plastic, like the thighs and side-panels/guns on the lower legs, have been painted the same light gray as the chest on Optimus.

: This is the first Hasbro-release depiction of Optimus in this mode, later backed up with the release of the full-fledged toy of [[Optimus Prime (G1)/toys#PMOP|Powermaster Optimus Prime]] with [[Apex Bomber]] the following year.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeApexArmor/optimusprime.htm More information on ''Heroes of Cybertron'' Powermaster Optimus Prime Apex Armor at TFU.info]''

{{-}}{{anchor|HOCaxe}}
[[File:HOC Optimus Axe.jpg|upright=1.66|thumb|Energon Axe: Only used in [[More than Meets the Eye, Part 2|one episode]]. Ever.]]
*'''Optimus Prime''' (2002)

:This second-wave ''Heroes of Cybertron'' release is a variation of the chase figure from the first ''Super Collection Figure'' wave, depicting Prime with his right hand replaced with his energy axe. This figure is a little different from its Japanese progenitor (beyond the "clear-plastic painted over" deal, of course), being painted in normal matte/gloss rather than metallic paint, and replacing the left "pointing" hand with the clenched fist of the later "communicator" version of Optimus. It also retains the ''Heroes'' molding alterations to Optimus's helmet.

: Oddly, he comes with the same collector card as the first version, and the packaging does not call out the energy weapon in any way. The card-back cross-sell even shows only the original Optimus. (The same happened to this wave's energy-weapon-wielding [[Megatron (G1)/merchandise#Heroes of Cybertron|Megatron]].)

::*''[http://www.tfu.info/2002/Autobot/HoCAxeOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Plasma Weapon at TFU.info]''

{{-}}{{anchor|HOCSpark}}
[[File:HOC Optimus Spark Attack.jpg|upright=1.66|thumb|This can't be [[Spark attack|Spark Attack]]! His is so energetic that... he BURNS.]]
*'''Powermaster Optimus Prime Spark Attack''' (2002)

: In a yet another unusual choice for the line, this second-wave figurine is a redeco of the first God Ginrai/Powermaster Prime Apex Armor PVC figure, cast in translucent orange plastic with red gradients and flame detailing, depicting a "spark attack" mode.

: This is a variant of the ''Super Collection Figure'' "God Fire Guts" God Ginrai chase figure, which had been rendered entirely in solid metallic gold paint.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeSparkAttack/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime Spark Attack at TFU.info]''

{{-}}{{anchor|HOCComm}}
[[File:HOC Optimus Comm.jpg|upright=1.66|thumb|You won't believe where I'm calling you from!]]
*''' Optimus Prime with Communicator''' (2003)

:This fifth-wave ''Heroes of Cybertron'' figure is a release of the Prime figure from the fourth ''Super Collection Figure'' wave, depicting a weaponless Prime talking into the communicator in his left arm. He retains the helmet alterations of the previous versions of the figure.

: This toy also came with the head and weapons for the wave's collectible [[Metroplex (G1)#Heroes of Cybertron|Metroplex]] build-a-figure.

::*''[http://www.tfu.info/2003/Autobot/HoCCommunicatorOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Communicator at TFU.info]''

{{-}}

==Hard Hero==
[[File:HardHero OptimusPrime bust.JPG|thumb|upright=0.85]]
*'''Optimus Prime''' (Bust, 2002)

: Optimus Prime was the first ''Transformers'' bust released by [[Hard Hero]]. He is approximately six inches tall at the head (8.5 at the gun) and is made out of cold-cast porcelain. There were also a version of the bust signed by the sculptor, limited to 100 samples.

{{-}}

[[File:HHero OptimusStatue.jpg|thumb|Not there. There!]]
*'''Optimus Prime''' (Full figure statue, 2003)

:Hard Hero also created a 13-inch tall Optimus Prime statue. It is sculpted pointing with his left hand while holding his ion rifle in his right.

{{-}}

==MyClone==
[[File:Prime-Myclone.jpg|upright=1.67|thumb]]
*'''Optimus Prime (2003)'''
**''Japanese ID number:'' '''MFT001''' and '''MFT006'''
**''Accessories:'' Display base
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

: Optimus Prime was released three times in the [[MyClone]] line, all in the first wave of toys. He was released in both robot and truck mode, while a clear Optimus in robot mode was one of two chase figures along with a clear Megatron.
{{-}}

==Generation 1 Figure-Collection==

[[File:Bottlecap prime gun.JPG|thumb]]

*'''Convoy (gun)''' (2003)
**''Japanese ID number:'' '''C-1'''
**''Accessories:'' Display base

:At only one inch in height, this Optimus "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's Transformers [[Generation 1 Figure-Collection]]. The figure was rendered in both a standard "retro" black and white color scheme, and [[:File:Bottlecap chase prime.jpg|a rare full-color]] [[chase figure|chase]] version, and came with a leaflet, personalized with cartoon screen captures.
{{-}}
[[File:Bottlecap prime pointing.JPG|thumb]]
*'''Convoy (pointing)''' (2003)
**''Japanese ID number:'' '''C-2'''
**''Accessories:'' Display base

:The second Prime figure in the Generation 1 collection was much like the first, only sculpted with an empty hand, pointing off into the distance like a lot of Optimus Prime figures are wont to do.
::*''[http://snakas.web.fc2.com/misc_item/kabaya_bottle.htm More information on the Bottlecap Collection at Autobase Aichi]''

{{--}}

==KT Figure Collection==
[[File:Optimus_Prime_KT.jpg|upright=1.66|thumb|Thanks for helping me... [[City of Steel (episode)|pull myself together.]]]]
*'''Convoy''' (KT Figure Collection, 2004)
: This figure was designed by [[Yuki Ohshima]] and produced by [[KT Figure Collection]]. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in ''[[The Transformers: The Movie]]''.

{{-}}{{anchor|KTFCRevival}}
[[File:Optimus_Prime_ex_KT.jpg|upright=1.44|thumb|No, I am [[redeco|NOT]] [[Ultra Magnus (G1)|Ultra Magnus]]! I'm silver, not [[:File:Magnuslongshot.jpg|white]]]]
*'''Convoy "Revival version"''' (''[[Figure Ō]]'' exclusive, 2004)
: The 82nd issue of the hobby magazine ''[[Figure Ō]]'' came with a [[redeco]] version of Optimus Prime's mini bust. It is painted completely silver, making him appear to be coated with the special alloy from "[[The Return of Optimus Prime, Part 2]]".

{{-}}

==Palisades==
[[File:Palisades WarWithinPrime.jpg|thumb]]
*'''The War Within Optimus Prime''' ([[Palisades Toys|Palisades]], 2005)

:'''The War Within'' Optimus Prime is a six-inch-tall polystone mini statue based on his appearance in the popular [[War Within (franchise)|''War Within'' comic book series]]. Prime stands on a silver Autobot-insignia stand, is decorated with dirt to simulate battle damage, and has articulation in his head and arms. The statue was limited to 1500 pieces worldwide.

{{-}}

==''Titanium Series''==
[[File:TitaniumRMWWPrime.jpg|thumb|Descend, Squattimus Prime.]]
*'''War Within Optimus Prime''' (3" Robot Masters, 2006)
**''Accessories:'' Ion Blaster, display stand

: ''War Within'' Optimus Prime is the second toy representation of Optimus Prime as he appears in ''War Within''. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

: He is squat. Very squat.

{{-}}
{{anchor|TitaniumG1}}
[[File:TitaniumRMG1Prime.jpg|thumb|Drop and give me twenty, soldier!]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand

: The first Titanium representation of G1 Optimus Prime has a well-proportioned sculpt based on his 20th Anniversary toy. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

{{-}}
{{anchor|TitaniumG1BattleDamage}}
[[File:TF-Titanium-Series-3-inch-Robot-Masters-Battle-Damaged-Optimus-Prime.jpg|thumb|"Drop dead and give me 20!"]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand
: This is a repaint of the 3" G1 Optimus Prime titanium figurine, with a 'battle-damaged' deco.
{{-}}{{anchor|tit2pack}}
[[File:Titanium-Series-Optimus-Prime-and-Bumblebee-2pack.jpg|thumb|"You! YOU STOLE MY LAST CESIUM SALAMI!"]]
*'''Optimus Prime & Bumblebee''' (2-pack, 2007)
**''Accessories:'' Ion Blaster, display stand
: A Toys 'R' Us [[exclusive]] two-pack, this set features "Supermetal Finish" (read: shiny) versions of the "Robot Master" ''Titaniums'' Optimus Prime and Bumblebee.

{{-}}

==First 4 Figures==
[[File:First 4 Figures Battlefield Optimus vs Megatron.jpg|thumb|upright=1.66]]
*'''Optimus Prime vs Megatron''' (2006)
**''Accessories:'' extra head for Megatron (with detachable helmet), extra hand for Optimus Prime
{{toydesigner|[[Little IroN]] (concept artist), [["Mad" Alterton]] (sculptor), [[Leandro Sivori]] (painter)}}

:The first entry in the ''Transformers Battlefield'' line by model company [[First 4 Figures]], this 13-inch tall diorama depicts Optimus Prime slugging it out with Megatron. Optimus is posed as though doing a shoulder shove while holding his ion blaster, but a provided "REP" (Replaceable Exterior Part) hand allows buyers to instead recontexualise the pose as a spinning backhand slap. Megatron comes with a REP of a battle damaged version of his head, which features a detachable "helmet" to show off his exposed robo-brain.

:The model was limited to 1,850 pieces worldwide, and came with a numbered certificate of authenticity, which allowed buyers to reserve the same number on their next purchase in the series. It also came with an A4 mini-poster depicting the same fight between Optimus and Megatron by artist [[Little IroN]], which was also sold separately as a limited edition A2 poster.

:As a ''Transformers Battlefield'' release, this model featured a detailed base designed to interlock with others in the same range to create a massive battle diorama. Unfortunately, a general discontinuation of First 4 Figures' ''Transformers''-related output put the kibosh on any further ''Battlefield'' models.

{{-}}{{anchor|F4F1}}
[[File:SnakeEyes OptimusPrime statue.jpg|thumb|upright=1.66|Get with the program.]]
*'''Optimus Prime and Snake Eyes''' (<s>2006</s> unreleased)

:Initially announced at UK Toy Fair in 2006<ref>[https://news.tfw2005.com/2006/01/25/first4figures-beast-wars-and-transformers-vs-g-i-joe-statuesbusts-4267 "First4Figures Beast Wars and Transformers VS. G.I. Joe Statues/Busts"] at TFW2005.com</ref> with a second showing at New York [[Toy Fair]] the following month,<ref>[https://tformers.com/transformers-/5568/news.html "Toy Fair 2006 - First4Figures TF & GI Joe Statues& Busts"] at tformers.com</ref> "Optimus Prime and Snake Eyes" was intended to be one of the first releases in First 4 Figures' ''[[G.I. Joe vs. the Transformers]]'' comic tie-in subline. This 8-inch tall bust depicted a one-armed Optimus Prime in the [[Cobra]] [[H.I.S.S. tank|HISS tank]] body he used in that series holding a battle-ready [[Snake-Eyes#First 4 Figures|Snake Eyes]], directly recreating the cover to the [[G.I. Joe vs. the Transformers issue 1|first issue]] of the comic (originally drawn by [[Mike S. Miller]]).

:Unfortunately, this statue was a casualty of F4F's discontinuation of ''Transformers'' product, the result of a challenging marketplace and lack of retailer interest.
{{canceledtoy}}

{{-}}{{anchor|F4F2}}
[[File:StormShadow OptimusPrime statue.jpg|thumb|upright=0.85|Hey, Private Haircut! I might have taken a bit too much off...YOUR HEAD!]]
*'''Optimus Prime vs Storm Shadow''' (2007)
{{toydesigner | [[Siamak Roshani]], [[Joel Chen]] (sculptors)}}
:The third reveal in the ''G.I. Joe vs. the Transformers'' series, this statue is 7.5 inches tall and depicts [[Storm Shadow#First 4 Figures|Storm Shadow]] in a victorious stance on Prime's damaged, disembodied head, based on the cover of [[G.I. Joe vs. the Transformers issue 5|''G.I. Joe vs. the Transformers'' issue 5]] (also by Miller). Storm Shadow is only a mite bigger than your standard 3.75" ''G.I. Joe'' figure, making this statue roughly in scale with the rest of your collection!

:After being revealed at [[San Diego Comic-Con]] in 2006,<ref>[https://tformers.com/ig.php?mode=album&album=6265&dispsize=800&start=0 Tformers.com's SDCC 2006 gallery]</ref> "Optimus Prime vs Storm Shadow" was released in January 2007, holding the dubious honour of being the only one of First 4 Figures' ''G.I. Joe vs. the Transformers'' range to see release. The statue was limited to 250 pieces in the U.S., and 250 pieces in the UK.

::*''[https://www.yojoe.com/archive/statuary/stormshadowprime/ More information on Optimus Prime vs Storm Shadow at YoJoe.com]''

{{-}}

==Diamond Select==
[[File:Optimus Prime Mini-bust.jpg|thumb|"I can't roll out without my legs installed!"]]
*'''Optimus Prime''' (Diamond Select, 2007)
:A mini-bust of Optimus Prime based on his appearance in the comic was released by [[Diamond Select Toys|Diamond Select]] in 2007. The figure includes the upper body of Optimus Prime, carrying his laser rifle and posed as if preparing to charge. The Matrix of Leadership is sculpted into the base of the statue.

{{-}}
[[File:Ark Globe.jpg|thumb]]
*'''Autobot Snow Globe''' (Diamond Select, 2007)

:Optimus Prime is also featured in Diamond Select's Autobot-themed snow globe, posing above a [[Mount St. Hilary]] base which also features the ''[[Ark (G1)|Ark]]'' and [[Omega Supreme (G1)|Omega Supreme]]. The globe was sculpted by [[Art Asylum]].

{{-}}

[[File:DST08 FinalBattlePrimeBust.jpg|thumb|Hold this for a moment won't you.]]
*'''Final Battle Optimus Prime''' (Diamond Select, 2008)
:Final Battle Optimus Prime was exclusive to the online retailer Action Figure Xpress. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and limited to 1000 pieces. Optimus Prime is shown after his climactic battle with Megatron during Transformers: The Movie; shortly before he passed the Matrix of Leadership (which is also removable here) to Ultra Magnus. His base features the life support readout that monitored both his declining health and eventual death.

{{-}}

{{anchor|G1AnimatedOptimusPrimeBust}}
[[File:DST SDCCToonPrimeBust.jpg|thumb]]
*'''G1 Animated Optimus Prime''' (Diamond Select, 2008)
:G1 Animated Optimus Prime was exclusive to the 2008 San Diego Comic Con. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and features a more matte color scheme to better match the cartoon's palette.

{{-}}

[[File:DiamondSelect PowermasterOptimus.jpg|thumb|"It's not great to be back."]]
*'''Powermaster Optimus Prime''' (Diamond Select, 2010)

:This fourth Optimus Prime bust was to be based on his [[Powermaster]] incarnation, but appears to have been canceled.

{{canceledtoy}}

{{-}}
[[File:DiamondSelect OptimusPrime bustbank.jpg|thumb|"Saving Money is the right to all Sentient Beings".]]
*'''Optimus Prime Bust Bank''' (Diamond Select, 2010)

:A 6-inch hollow Optimus Prime bust to keep your spare change safe! It would've featured articulation in its shoulders and neck, but like the Powermaster bust, it never saw release.

{{canceledtoy}}
{{-}}

==''Transformers'' (2007)==
*'''Optimash Prime''' (2007)
{{main|Optimash Prime}}
{{-}}
[[File:Softimus Prime.jpg|thumb|Freedom is the right of all sentient beings... in bed.]]
*'''Softimus Prime''' (2007)

:Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He features Movie-style faction symbols on his right arm and both sides of his cab mode. He is love.

::*''[http://www.tfu.info/2007/Autobot/SoftimusPrime/softimusprime.htm More information on Softimus Prime at TFU.info]''

{{-}}

==''Robot Heroes''==
[[File:RH Optimus vs Ravage.jpg|thumb|upright=1.66|Mini-Me!]]
*'''Optimus Prime & Ravage''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Part of the first wave of ''[[Robot Heroes (toyline)|Robot Heroes]]'' 2-packs (sold under the [[Transformers (2007 toyline)|2007 live-action-movie line]] branding), Optimus Prime is a simple, yet well-detailed two-inch tall figurine with exaggerated, cartoony proportions, with swivel articulation at the neck and shoulders. He is sculpted holding his Ion Blaster rifle in his right fist and his left arm in a pointing pose. He is also love, and demands that you pull his [[More than Meets the Eye, Part 3#Notes|Finger of Doom]].

: He was sold in a two-pack with [[Ravage (G1)/toys#Robot Heroes|Ravage]], positioned in a way that gives an impression of [http://orig12.deviantart.net/b22b/f/2008/216/7/1/optimus_prime_vs_ravage_by_cobaltkitty.jpg him freaking out to Ravage's size].

: This version of Optimus was later also released as part of a set with a 100-piece [[jigsaw puzzle]] with no apparent changes.

{{anchor|RHBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: In some countries outside of North America, Optimus Prime was released individually in a blindpack with no notable changes.

{{-}}{{anchor|RH5pack}}
[[File:Robot Hero Supermetal Optimus Prime.jpg|thumb|upright=0.99|Cuteness is the right of all sentient beings.]]
*'''Decepticon Sneak Attack''' (Multi-pack, 2007)

: "Optimus Prime with Supermetal Finish" is a slightly-shinier [[redeco]] of the previous ''Robot Heroes'' figure; this is the most noticeable with his blue parts, which are now in a much brighter, richer gloss-blue paint rather than the unpainted darker-blue matte plastic of the two-pack version.

: He came in a [[Walmart]] exclusive multipack, alogn with [[Mirage (G1)/toys#RH5pack|Hologram Mirage]], [[Cliffjumper (G1)/toys#Robot Heroes|Cliffjumper]], "Supermetal Finish" [[Megatron (G1)/merchandise#RH5pack|Megatron]], and [[Skywarp (G1)/toys#Robot Heroes|Skywarp]].

{{anchor|RHFinishBlindpack}}
*'''Optimus Prime with Supermetal Finish''' (Single-pack, 2008)

: "Supermetal Finish" Optimus Prime also saw release in a blindpack outside of North America.

{{-}}{{anchor|RHUnicron}}
[[File:RH Prime vs Unicron.jpg|thumb|upright=1.66|'Til all are cute.]]
*'''Optimus Prime & Unicron''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Sold in the third wave of ''Robot Heroes'', this version of Optimus is posed opening the [[Matrix of Leadership]], complete with clear-plastic shine.

: He was packed with a very small [[Unicron/toys#Robot Heroes|Unicron]].

{{anchor|RHMatrixBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: Just like the previous figures, the Matrix-bearing Prime also received a blindpacked release.
{{--}}

==''Attacktix''==

*'''Optimus Prime''' (Starter Set, 2007)
[[File:Attacktix Optimus Prime.jpg|thumb|He shoots sideways. The direction, not [[Sideways (Armada)|the character]].]]
{{attacktix
|ID=TF2-19
|faction=Autobot
|class=Leader
|special=Last Stand - 13/26 (50%) success ratio
|cost=40
|speed=6
|attacktype=Shooter (Force Blast)
}}
{{-}}
:Optimus Prime will shoot you down. He was released as part of the 2007 Starter Set along with ''[[The Transformers (franchise)|Generation 1]]'' [[Megatron (G1)/toys|Megatron]], ''[[Transformers: Energon (franchise)|Energon]]'' [[Landquake (Energon)|Landquake]] and ''[[Transformers: Cybertron (franchise)|Cybertron]]'' [[Skywarp (Armada)|Skywarp]].

:Optimus' Last Stand special allows him to stand up if he's the only figure in your team left in play. If you're down to two men you might even be tempted to shoot your own man just to keep Optimus Prime in play. Don't though. [[Peter Cullen]] wouldn't approve.

:Sadly you can't bring him into play with the ''Cybertron'' [[Optimus Prime (Armada)/toys|Super Optimus Prime]] vehicle mode because he's not ''Super'' Optimus Prime.
{{-}}

==''Revoltech''==
[[File:Revoltech Convoy.jpg|thumb|upright=1.66|Windowbra! ''(2007 Version pictured)'']]
*'''Convoy''' (2007/2014)
**''Series number:'' '''019'''
**''Legacy of Revoltech ID number'': '''LR-008'''
**''Accessories:'' Ion blaster, Autobot Matrix of Leadership, two clenched fists, gun-wielding right hand, pointing right hand, open left hand

:A non-transforming but ''highly'' articulated Optimus Prime action figure, ''[[Revoltech]]'' Convoy uses the ''Revoltech'' "revolver joints" for maximum poseability. Prime comes with his now-standard ion blaster and Matrix of Leadership accessories, as well as a few alternate hands; while one of the hands is specifically designed to grip the ion blaster, he can't really do anything dramatic with the Matrix, and it just sort of sits in his open-palmed left hand. His sculpting is explicitly in the style of [[Pat Lee|Pat "serfdom" Lee]]'s interpretation of Prime, but due to physical constraints has no lack of perspective.

:Unsurprisingly, this mold was redecoed to create ''Revoltech'' [[Ultra Magnus (G1)/merchandise#Revoltech|Ultra Magnus]]. Magnus comes with a new hand mold that can be used to connect him and Prime together in a handshake.

:The initial reveal of the figure (sculpted by Yamaguchi) features swiveling cut joints instead of "revolver joints" (notably the hip parts), with a rather jarring angled joint on the waist (which results in a "sliced" appearance if swiveled).

:Unfortunately, ''Revoltech'' Convoy cannot be distributed to the US due to licensing restrictions, so fans must rely on online hobby shops to import him.

:In 2014, ''Revoltech'' Convoy was reissued as part of the ''Legacy of Revoltech'' line, with an increased price of 3900 yen. This rerelease uses revised Revoltech joints, which come in matte black instead of glossy and have more ratcheting points than previous releases.
{{-}}
===''Amazing Yamaguchi''===
[[File:Tf-Yamaguchi-Revoltech-014-Convoy.jpg|upright=1.66|thumb]]
*'''Convoy''' (2019)
**''Series number:'' 014
**''Accessories:'' Ion Blaster, Energon Axe, 1 pair of splayed hands, 1 pair of trigger hands, left clawed hand, right pointing hand, interlocked hand

:''Amazing Yamaguchi'' Convoy is an all-new take to the Revoltech figure above, but more poseable. Apart from the Ion Blaster, this figure comes with an Energon Axe accessory, and an interlocked hand accessory that is designed to resemble the haymaker that took down Megatron in ''[[The Transformers: The Movie]]''.

:Unlike the first Revoltech figure, Convoy features painted-details-on-colored-plastic rather than fully coating them. The plastic is noted to have a hollow feel compared to the first figure.

:Due to production delays, the release date was rescheduled from September 29 to October 24.
{{-}}

==Sota Toys==
*'''Transformers Chess Set''' (<s>2007</s>)
:An Optimus Prime piece was to be the Autobot-side King on a [[Chess#Sota Toys|chess set]] based on Generation 1, but the set apparently never saw release.
{{canceledtoy}}
{{-}}

==Ornaments==
*'''Optimus Prime''' (2007)
[[File:OptimusPrimeG1Ornament.jpg|thumb|100px|''(American Greetings version pictured)'']]

:Manufactured by [[American Greetings]] as part of their Heirloom ornament collection, this hanging sculpt of Optimus Prime is based upon the 20th Anniversary toy release.
{{-}}

*'''Optimus Prime''' (2014)
[[File:Optimus-prime-keepsake-Hallmark.jpg|thumb|''(Hallmark version pictured)'']]
:Manufactured by [[Hallmark]] as part of their Keepsake ornament collection as part of the Hasbro series which includes ornaments based on [[My Little Pony]] G1, the electronic game Simon, and the board game Sorry, this hanging sculpt of Optimus Prime is based upon the original G1 toy cab in robot mode posed like 1984 box art.
{{-}}

==''Mighty Muggs''==
[[File:MightyMuggs OptimusPrime.jpg|thumb|Optimus lost his ears in the rock tumbler.]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: This [[super deformed]], non-transformable Optimus Prime figure uses the standard [[Mighty Muggs]] body template, with swivel joints in his neck and limbs. He comes with a similarly super-deformed version of his ion rifle.
{{-}}

{{anchor|SDCCmightymugg}}
[[File:MightyMuggs MetallicOptimusPrime.jpg|thumb|Optimus, did you polish your head in the Shine-O Ball-O?]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: An [[exclusive]] to the 2009 [[San Diego Comic-Con]], this Optimus Prime Mugg has a shiny metallic finish.
{{-}}

{{anchor|2018mightymugg}}
[[File:MightyMuggs 2018 Optimus.jpg|thumb|upright=1.44|You ever get so mad you sprout new ears?]]
*'''Optimus Prime''' ([[2018]])
**''ID number:'' '''01'''

: Based on his [[evergreen]] design, this Optimus is part of the 2018 ''Mighty Muggs'' relaunch. As part of the new line, he has a helmet that can be pressed down to change his expression. He features three different faces: [[Mouthplate|classic]], angry, and angrier.
{{-}}

==Transformers Wacky Wobblers==
[[File:WackyWobblers G1OptimusPrime.jpg|thumb|upright=0.85]]
*'''Optimus Prime''' (2009)

: This Optimus Prime {{w|bobblehead}} is part of the popular ''[[Wacky Wobblers]]'' line produced by {{w|Funko}}. Aside from the standard-issue big wobbling head, he features an ion rifle molded onto his right hand and his arms swivel at the shoulders. Optimus is affixed to a base with his name on it.
{{-}}

==USB-Powered Speaker Head==
*'''Optimus Prime USB-Powered Speaker Head'''
[[File:G1-optimusprime-merc-speaker.jpg|thumb]]
: As a 6.5" figure, Optimus Prime's head contains twin {{w|Universal Serial Bus|USB}}-powered speakers. There are two speakers inside each side of his head. The control panel, USB port, and earphone port are located in the back of the head. Under the neck, there is a display to support the head.
: The speaker was redecoed to create Ultra Magnus Speaker.
{{-}}

==Transformers Backpacks==
*'''Optimus Prime''' (2009)

:Made by [[F*A*B Starpoint]], these backpacks are allegedly "engineered for style, safety, comfort... and saving the Universe!" The Generation 1 Optimus Prime design features a stock silhouette of Optimus Prime surrounded by stars, like the [[Paramount Pictures]] logo, while on the lower compartment there is a gigantic Autobot sigil.

==Universal Studios==
*'''Optimus Prime plushie''' (2011)

:Created for the [[Transformers: The Ride – 3D|Transformers ride at Universal Orlando]], a [[super deformed]] plush toy of Optimus was made available at the Supply Vault gift shop near the opening of the ride.

==Tomica==
[[File:TF-Tomica-Wrapping-Trailer.jpg|thumb]]
*'''Transformers Wrapping Trailer''' (2011)
:''[[Tomica]]'' "Transformers Wrapping Trailer" is a die-cast, non-transforming semi tractor-trailer. A redeco of the 2008 "[[wikia:tomica|Tomica Hero: Rescue Force Trailer]]" toy, "Transformers Wrapping Trailer" renders the cab in Generation 1 Optimus Prime colors, while the trailer is decked out with pictures of [[live-action film series]] [[Optimus Prime (Movie)|Optimus Prime]], [[Bumblebee (Movie)|Bumblebee]] and [[Ironhide (Movie)|Ironhide]]. Like all Tomica toys & all [[Go-Bot (G2)#Toys|''Generation 2'' Go-Bots]] and [[Spychanger]]s, Wrapping Trailer features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces.
{{-}}

==Transformers x Mimobot==
[[File:Mimobot OptimusPrime.jpg|thumb|upright=1.66|Why the long face?]]
*'''Optimus Prime Mimobot''' (Mimoco, 2011)
:Produced by [[Mimoco]] as part of their multi-brand line of designer USB "Mimobot" flash drives, this Optimus Prime memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.
{{-}}

==Cuponk==
[[Image:NYCC2011 Cuponk.jpg|thumb|250px|The real contest is whether Prime's medal or Megatron's belt is cooler.]]
*'''Transformers Cuponk''' (2011)
:A New York Comicon exclusive, this set includes two Cuponk cups and 6 ping pong balls. Prime is featured on one cup and one ping pong ball. The same cup also features [[Bumblebee (G1)|Bumblebee]], [[Jazz (G1)|Jazz]], [[Grimlock (G1)|Grimlock]], and [[Hot Rod (G1)|Hot Rod]].
{{-}}

==Titan Warriors==
[[File:Titan-Warrior-Optimus-Prime.jpg|upright=1.11|thumb|Sofubi Hero figures are the right to all young sentient beings.]]
*'''Titan Warrior 5-Pack''' (2013)
:Available at San Diego Comic Con 2013, This Optimus Prime is a 6" PVC Titan Warrior figure (similar to Bandai's ''Ultra/Sentai/Rider Hero, Movie Monster Series'') representing his Generation 1 character. He was packed with [[Grimlock (G1)/toys|Grimlock]], [[Megatron (G1)/toys|Megatron]], [[Starscream (G1)/toys|Starscream]] and [[Soundwave (G1)/toys|Soundwave]].

*'''Optimus Prime''' (Titan Warrior, 2014)
:The Titan Warriors Optimus Prime toy was released individually, under the Beast Hunters Titan Heroes subline.

{{-}}

==''The Loyal Subjects''==
*'''Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Talking}}
*'''Talking Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Larger}}
*'''Talking 5.5" Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Blank}}
*'''8" Blank/DIY Optimus Prime''' (2014)
{{anchor|The Loyal Subjects OG}}
*'''8" OG Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Fiberglass}}
*'''4' Fiberglass Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Hot Topic}}
*'''Talking 5.5" Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Dead}}
*'''8" Dead Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Silver}}
*'''8" Silver Bullethole Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Gold}}
*'''8" Gold Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Black Gloss}}
*'''8" Black Gloss Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Gamestop}}
*'''Talking Optimus Prime''' (2014)
{{charstubtoys}}
{{-}}

==''Mecha Nations''==
[[File:klog tfop 003.jpg|thumb|upright=1.66|Prime, not the shrink wrap!]]
*'''Optimus Prime''' (2014)
**''ID Number:'' '''MN01'''
**''Accessories:'' Ion Blaster, Energon Axe, Removable Armor.

:Created by [[Kids Logic]], this [[super deformed]] G1 Optimus Prime stands 6" tall and is articulated. He features a metallic color scheme, removable armor and replacement hands. He also features LED light up eyes, lights, weapons and [[Matrix of Leadership|Creation Matrix]].

:This figure was also redecoed into Mecha Nations [[Nemesis Prime (G1)#Mecha Nations|Black Convoy]] and [[Ultra Magnus (G1)/merchandise#Mecha Nations|Ultra Magnus]].

{{-}}

==''Ultimetal''==
[[File:Ultimetal-UM01-Optimus-Prime.jpg|upright=1.66|thumb|"Why waste your money so easily Prime?"]]
*'''Optimus Prime''' (2014)
**''ID number:'' '''UM-01'''
**''Accessories:'' Ion blaster, energon-axe, small Matrix, 24 armor pieces, 2 smokestacks, large Matrix, display stand, 8 display stand parts, remote control

: ''Ultimetal'' Optimus Prime is a large non-transforming figure produced by [[Art Storm]], standing at an impressive 1 foot 4 inches/43 cm and made from extensive [[die-cast]] metal. Packaged in four different boxes, he features plenty of articulation and detail, including an opening chest and numerous magnetically attached armor panels that, when removed, reveal Prime's internal anatomy. He also has electronic light-up eyes and roof lights as well as 20 spoken English phrases, all activated via remote control. His [[mouthplate]] even moves when he talks, just like in the cartoon!

: Prime comes with an ion blaster which can also be opened to reveal technical detail, an energon-axe, and two Matrices of Leadership of different sizes. The smaller one fits into his chest, where it can be lit up by an LED, while the larger one lights up on its own and can be held in his hands or placed on display. Prime's display stand has smaller stands for the Matrix and ion blaster and also has light-up parts.

: Optimus Prime was recolored into the inner robot of ''Ultimetal'' [[Ultra Magnus (G1)/merchandise#Ultimetal|Ultra Magnus]].

::*''[http://artstorm.co.jp/ultimetal_optimusprime.html More information on ''Ultimetal'' Optimus Prime at Art Storm's official site]''

*'''Optimus Prime - Battle Damaged''' (2018?)
**''ID number:'' '''UM-01BD'''

{{-}}

==''EX Gōkin''==
[[File:EXGokin Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2014)
**''Accessories:'' Two fists, two open hands, two gripping hands, right pointing hand, ion blaster, energon-axe, display stand

: A 6.6-inch tall non-transforming Optimus Prime action figure was produced by Art Storm as part of their ''EX Gōkin Transformers Series'' line. He comes with his trademark blaster and energon-axe as well a number of extra hands, and his chest opens to reveal a non-removable Matrix.

::*''[http://artstorm.co.jp/exgokin_transformersseries_convoy.html More information on ''EX Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==Hikari==
[[File:HikariLimitedEditionMetallicOptimusPrime.jpg|thumb|upright|150px]]
*'''Metallic Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime with a metallic finish. This figure is a limited edition, and limited to 2,000 pieces.

:This mold was also used to make the other limited edition Optimus Primes seen below.

{{-}}
[[File:HikariLimitedEditionClearGlitterOptimusPrime.jpg|thumb|upright|150px]]
*'''Optimus Prime Clear Glitter''' (2014)

:A non-transforming vinyl Optimus Prime figure. While retaining the classic, original colors, this mold is redone to be clear plastic, with glitter bits put into the figure. This vinyl is a limited edition, and limited to 3,000 pieces.

{{-}}
[[File:HikariLimitedEditionBattleReadyOptimusPrime.jpg|thumb|upright|150px]]
*'''Battle Ready Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The mold is Redon again, this time in a battle-damaged look, while he retains the classic Optimus Prime colors. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionGreySkullOptimusPrime.jpg|thumb|upright|150px|By the power of Grayskull... '''''I HAVE THE POWER!''''']]
*'''Grey Skull Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. This vinyl takes the colors in a different way, which is mostly white with some dark grey areas. The colors to kinda look skeleton-ish. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDistressedOptimusPrime.jpg|thumb|upright|150px]]
*'''Distressed Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The colors take on an [[Optimus Prime (Movie)#''Age of Extinction'' film|Age of Extinction Optimus Prime]], in his flat-nose truck mode. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionFireOptimusPrime.jpg|thumb|upright|150px]]
*'''Fire Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in clear plastic. The colors seem to homage the Generation 1 [[Hot Rod (G1)|Rodimus Prime]].,This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDangerousOptimusPrime.jpg|thumb|upright|150px]]
*'''Dangerous Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, done in a camouflage style. This figure is a limited edition, and limited to only 600 pieces.

{{-}}
[[File:HikariLimitedEdition24KOptimusPrime.jpg|thumb|upright|150px]]
*'''24K Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in gold plastic. This figure is a limited edition, and only limited to 600 pieces.

{{-}}
==''Thrilling 30''==
*'''Optimus Prime''' (Collectible Figurine, 2014)
**''Series / Number:'' '''1 / #1'''
**''Accessories:'' Collector's base
:A super-deformed Optimus Prime was released among the blindpacked [[Thrilling 30#Collectible Figurines|''Thrilling 30'' Collectible Figurines]] by [[Goldie Marketing]]. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

*'''Collectible Figurines''' (5-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 5 Collector's bases
:The same Optimus Prime figurine was also available in a 5-pack alongside [[Megatron (G1)/merchandise#Thrilling 30|Megatron]], [[Ratchet (G1)/toys#Thrilling 30|Ratchet]], [[Starscream (G1)/merchandise#Thrilling 30|Starscream]] and [[Soundwave (G1)/merchandise#Thrilling 30|Soundwave]].

*'''Optimus Prime 3-pack''' (3-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 3 Collector's bases
:The same Optimus Prime figurine was ''also'' available in a 3-pack alongside [[Optimus Prime (WFC)/merchandise#Thrilling 30|''Prime'' Optimus Prime]] and [[Optimus Prime (Movie)/merchandise#Thrilling 30|Movie Optimus Prime]].
{{-}}

==Leg Avenue==
{{anchor|LegAvenue}}
[[File:Leg Avenue Optimus Prime.jpg|right|upright=.75|thumb|]]
:Costume and lingerie manufacturer Leg Avenue released an officially licenced Bumblebee costume along side ones for [[Bumblebee (G1)/merchandise#LegAvenue|Bumblebee]] and [[Megatron (G1)/merchandise#LegAvenue|Megatron]].

{{-}}

==''Tiny Titans''==
*'''Optimus Prime''' (Tiny Titans, 2015)
**''Series'': '''2'''
**''Number'': '''10/12'''

: Part of the third assortment of ''[[Tiny Titans]]'' [[blindpacking|blindpacks]], this version of Optimus Prime is a very small, soft-plastic figure of him in robot mode, brandishing both his rifle and his energy-axe weapon in a running battle pose.

: He includes a collectible card that renders him in the [[Transformers: Robots in Disguise (2015 franchise)|2015 ''Robots in Disguise'']] styling. The card includes a scan-badge for the [[Transformers: Robots in Disguise (mobile game)|''Robots in Disguise'' mobile game]], which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.

{{-}}{{anchor|TinyTitans2}}
[[File:TinyTitans OptimusG1S5.jpg|upright=1.67|thumb]]
*'''Optimus Prime''' (Tiny Titans, 2016)
**''Series'': '''5'''
**''Number'': '''11/12'''

: Part of the fifth assortment of ''Tiny Titans'', this version of Optimus is in a more neutral pose, this time only carrying his rifle.

: As per usual, he includes a collectible card that includes a scan-badge for the ''Robots in Disguise'' mobile game, which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.
{{-}}

==''D-Style''==
[[File:D-Style-OptimusPrime.jpg|thumb|upright=1.66|You got D-touch. You got D-power]]
*'''Convoy''' (2015)
**''ID number:'' '''43'''
**''Accessories:'' Two fists, pointing right hand, Ion blaster, energon-axe, Autobot Matrix of Leadership, Convoy cab with trailer

:An Optimus Prime was produced by [[Kotobukiya]] as part of ''[[D-Style]]'', their franchise-spanning line of super deformed model kits. His accessories include an ion blaster, an energon-axe, a Matrix that can store in his chest, and a tiny super deformed representation of his truck mode which can carry the ion blaster. Moving his antennae causes his mouthplate to move up and down.

:For a small figure it includes a large amount of articulation, including ankle tilts and top of legs tilting away from the yellow codpiece.

: The Convoy Trailer, ion blaster and the gold part of the Matrix all require painting. In addition, on promotional images ''all'' the black details and lines (for example on the front thighs and round the edge of the yellow codpiece) are painted and the eyes have been painted blue instead of left as clear plastic.

: Amusingly, the head has the [http://www.1999.co.jp/itbig29/10294593z.jpg mouth-less face] underneath Optimus' mouthplate, as a either a reference to the error from [[The Search for Alpha Trion]] or limitation in the model kit (or both).

:This mold was also used to make ''D-Style'' [[Nemesis Prime (G1)#D-Style|Black Convoy]].
{{-}}

==''ES Gōkin''==
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe, Matrix, left & right gripping hands, left & right open hands, left & right pointing hands, display stand

:Optimus Prime was also released as part of Art Storm's ''ES Gōkin'' series, a line of posable super deformed figures. He comes with his trademark gun which he can hold in either hand, an energon-axe that plugs into his wrist sockets, and a Matrix he can hold but not store in his chest.

::*''[http://artstorm.co.jp/esgokin_convoy.html More information on ''ES Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==''D-Collection''==
[[File:D-Collection Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe

:[[Kabaya]]'s ''D-Collection'' Optimus Prime is a small super deformed figure that requires some assembly and features articulation limited to his shoulders. He comes with his trademark blaster and axe accessories. Sold blindpacked, Prime is available as both a standard full color figure and a rare clear plastic version. He comes with chewing gum.
{{-}}

==''Metal Earth''==
[[File:Metal Earth Optimus Prime.jpg|thumb]]
*'''Optimus Prime''' (2015)
**''ID number:'' '''MMS300'''
:''[[Metal Earth]]'' Optimus Prime is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".
{{-}}
[[File:Metal Earth Legends Optimus Prime.jpg|thumb|[[Minecraft|Minecraft x Transformers]] before ''Minecraft x Transformers'' was a thing]]
*'''Optimus Prime''' (Legends, 2019)
**''ID number:'' '''MEM055'''
:''Metal Earth Legends'' Optimus Prime is a DIY 3D steel model kit in the shape of a super deformed version of the [[evergreen]] Optimus design. The kit's difficulty rating is given as "moderate".
{{-}}

==Hot Toys==
*'''Optimus Prime (Starscream Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Ion Blaster, two wings, two wing mounts, two null-rays, Matrix of Leadership, Base, Starscream's head (Sideshow Collectable's exclusive)

:Released by [[Hot Toys]] this high end collector figure stands approximately 30 cm tall. It features LED light up eyes and it's chest can open to reveal a LED light up, removable Matrix of Leadership. This version comes with a pair of wings and two [[null-ray]]s from Starscream that Optimus can attach. The Sideshow exclusive version of this comes with Starscream's severed head.

*'''Optimus Prime (Megatron Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Fusion cannon, Ion Blaster, gun with stock, set of wheels, two cannon mounting accessories, shoulder mount, Matrix of Leadership, Base

:This version of the figure has accessories themed from Megatron. These include Megatron's [[fusion cannon]], and a long rifle that passingly resembles Megatron's original gun mode. Both can be combined into a large two handed cannon.

{{-}}

==''Block Wars''==
*'''Optimus Prime''' (2016)
**''Number:'' '''1'''

:Part of [[Kabaya]]'s ''[[Transformers Block Wars]]'' candy toy line, this Optimus Prime kit is surprisingly, based on his [[Optimus Prime (G1)/toys#Cyber Series|Cyber Series Commander toy]]. Molded in red, blue, and yellow plastic with detailing from stickers, he transforms into a truck when finished and is armed with a two-pronged spear. He can also be taken apart and combined with ''Block Wars'' [[Bumblebee (G1)/toys#Block Wars|Bumblebee]], [[Megatron (G1)/merchandise#Block Wars|Megatron]] and [[Starscream (G1)/toys#Block Wars|Starscream]] in various configurations, the ones involving Prime shown on the packaging being:

:*Giving Prime Starscream's wings as a jetpack and arming him with Megatron's cannon.
:*Placing Megatron's turret on Prime's truck mode.
:*Giving Bumblebee Prime's spear, Megatron's arms and Starscream's wings.
:*Attaching Prime and Starscream's legs to Megatron's vehicle mode to create a walking tank.
:*Powering Starscream up by attaching Prime's spear to his back and giving him Bumblebee's weapons.
:*Combining all four into an unnamed combiner, with Optimus Prime forming the torso and upper legs.

==''Transformers Figure Collection''==
[[File:TF-Transformers-Figure-Collection-Optimus-Prime-Decoy.jpg|thumb]]
*'''Convoy''' (01-2016)

:Standing 42mm tall, ''Transformers Figure Collection'' Optimus Prime is a non-poseable soft-rubber figure greatly based on a [[Decoy (G1)|Decoy]] figure.

{{-}}

==''Hero of Steel''==
[[File:HeroofSteel Convoy.jpg|thumb|upright=1.11]]
*'''Convoy''' (2016)
**''Accessories:'' Ion blaster

:Produced by Alpha Max, ''Hero of Steel'' Convoy is a stylized, non-transforming figure standing at 9 inches/23 cm tall. He comes with his ion blaster.

{{-}}

==Bitfig==
[[File:Bitfig-Part-1.jpg|thumb|]]
*'''Convoy''' (12-2016)
Part of the first wave of Transformers Bitfig capsule toys by [[TakaraTomy A.R.T.S]],
Convoy's design is inspired by his appearance in the G1 cartoon, and is articulated at the neck and shoulders.
Bitfig toys were packaged in capsules color coded to the toy they contained.
{{-}}

==Prime 1 Studio==
===''Premium Masterline''===
[[File:TF-Premium-Masterline-PMTF-01-Optimus-Prime.jpg|upright=1.55|thumb|"Just in case you want to say "''I should've looked like this in the movies''", yes, I heard you."]]
*'''Optimus Prime''' (2017)
**''ID Number'': '''PMTF-01''' / '''01EX''' (exclusive)
**''Accessories'': Base, Fusion axe (exclusive), Energy axe (exclusive)

:One of the very first releases of the ''Premium Masterline'' series by [[Prime 1 Studio]], this Optimus Prime is a ''massive'' non-transforming statue based on his Generation 1 appearance with a blend of live-action film aesthetic, and features light-up LED eyes. The statue was also designed by [[Josh Nizzi]] himself. If customers had purchased the statue at [https://www.sideshowtoy.com/collectibles/transformers-optimus-prime-transformers-generation-1-prime-1-studio-9027641/ Sideshow's website], they would receive exclusive Energy and Fusion axes, which can be used to replace Prime's Ion Blaster-holding hand. The standard version was limited to 1500 pieces, while the exclusive version was limited to 750 pieces.

:This statue was later redecoed as [[Nemesis Prime (G1)#Prime 1 Studio|Nemesis Prime]] and [[Ultra Magnus (G1)/merchandise#Prime 1 Studio|Ultra Magnus]]. The statue's model also served as an inspiration to [[Optimus Prime (Movie)|Movie Optimus Prime]]'s appearance in the ''[[Bumblebee (film)|Bumblebee]]'' film.

{{-}}{{anchor|P1SGold}}
[[File:TF-Premium-Masterline-PMTF-01GL-Optimus-Prime-Gold-Edition.jpg|upright=1.55|thumb]]
*'''Optimus Prime Gold Version''' (2018)
**''ID Number'': '''PMTF-01GL'''
**''Accessories'': Base, Fusion axe

:Limited to 500 pieces, Optimus Prime Gold Version is a redeco of the statue above, evoking his Electrum-coated appearance in the Generation 1 episode "[[The Golden Lagoon (episode)|The Golden Lagoon]]". He also comes with a Fusion axe accessory that can replace his Ion Blaster hand.

{{-}}
===''Age of Time''===
[[File:Prime 1 Studio Superior Optimus Prime.jpg|upright=1.55|thumb]]
*'''Superior Optimus Prime''' (<s>201?</s>)

:''Age of Time'' Superior Optimus Prime was designed to be the "ultimate amalgamation" between G1 and movie Optimus Primes. He would have come with two blasters and a huge jetpack, specifically taking cues from Prime's combined form with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]''.

:For reasons unknown, this figure was silently canceled.
{{canceledtoy}}

{{-}}
===''Cutie1''===
[[File:Cutie1 Optimus Prime Figure.jpg|upright=1.11|thumb|''Transformers X Coraline'', directed by [[Travis Knight]].]]
*'''Optimus Prime''' (2022)
**''ID Number'': '''No:055'''
**''Accessories'': Stand

:A striking departure from previous Prime 1 Studio offerings, ''Cutie1'' Optimus Prime is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

:He was later redecoed as ''Cutie1'' [[Nemesis Prime (G1)#Cutie1|Nemesis Prime]].

{{anchor|Cutie1keychain}}
*'''Optimus Prime''' (Keychain, 2021)
**''Accessories'': Stand, chain

:Part of a marketing push following the announcement of the figure above, an acrylic keychain of ''Cutie1'' Prime was released, along with other products such as stickers, T-shirts, hand towels and totebags using the design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.

{{-}}{{anchor|P1SWFC}}

===''War for Cybertron Trilogy''===
[[File:Prime-1-Studio-WFC-Optimus-Prime.jpg|upright=1.66|thumb|"Why... have I... been... canceled?"]]
*'''Optimus Prime''' (<s>2022</s>)
**''ID Number'': '''PMTF-05''' / '''05UT''' (Ultimate Version)
**''Accessories'': Base (standard), base with Shockwave (Ultimate Version)

:A statue based on Optimus Prime's appearance in the ''[[Transformers: War for Cybertron Trilogy (cartoon)|War for Cybertron Trilogy]]'' cartoon. The exclusive version includes a defeated [[Shockwave (G1)/toys#Prime 1 Studio|Shockwave]] as part of the statue's base.

:This item was canceled due to the combination of rising production costs and insufficient preorders.
{{canceledtoy}}
{{-}}

==My Busy Books==
[[File:TF-My-Busy-Books-Transformers-Optimus-Prime-figurine.jpg|upright=1.66|thumb]]
*'''Transformers: My Busy Book''' (2017)

:Included with the [[Transformers: My Busy Book|10-page board book]], 12 figurines, and a playmat, Optimus Prime is represented by a pair of small, PVC non-transforming figurines of his robot and his semi-truck alternate mode, based on his [[evergreen]] design. Like most of the land-based vehicle figurines, his wheels do not roll.

:In terms of quality control, the figurines' paint applications can be... shoddy. If you're a collector who prefers to display them, you should resign yourself from buying it or try to [[customizing|customize]] the figures with better paint applications if you have the skills.
{{-}}

==Rubik's Crew==
[[File:Rubiks Crew Optimus.jpg|upright=1.66|thumb]]
*'''Rubik's Crew Game: Transformers Optimus Prime Edition'''<ref>[https://www.hasbro.com/en-us/product/rubik-s-crew-game-transformers-optimus-prime-edition:70976F4B-5056-9047-F52F-5BB6105031BB Rubik's Crew Game: Transformers Optimus Prime at hasbro.com]</ref> (2017)
This [[super deformed]] version of [[Optimus Prime (G1)|Optimus Prime]]'s robot mode has a detachable "Puzzlehead" that functions like the [https://www.rubiks.com/store/puzzles/rubiks-2x2 2x2] [[Rubik's Cube]].
{{-}}
{{-}}
==Fidget Its==
[[File:TF-Fidget-Its-Optimus-Prime.jpg|upright=1.66|thumb|Before time began, there was...the Cube.]]
*'''Optimus Prime''' (Fidget Its, 2017)

:''Fidget Its'' Optimus Prime is a non-transforming cube-shaped figurine, built for for your fidgeting needs! His pair of eyes & his forehead can be pushed like buttons, his right arm can swivel, his rear section can be fiddled like a combination lock dial, and his left arm can be moved up, down, up, and down.

{{-}}

==Hauck==
[[File:Hauck Go Kart Optimus.jpg|upright=1.66|thumb|Everyone wants to ride Optimus.]]
*'''Optimus Prime Go Kart''' (2017)
:Manufactured by [[Hauck toys]], the Optimus Prime go-kart is a small, pedal-operated vehicle for kids aged 4-8 years old. Cast in the image of Optimus (even featuring his head sculpted on the front), the kart features an adjustable seat as well as a brake.
{{-}}

==Colorcasa==
[[File:Gen-Colorcasa Optimus Prime Spoon Fork.jpg|upright=1|thumb|Eating is the right of... yeah you know the gist.]]
*'''3D Children Tableware''' (2017)
:Chinese company Colorcasa released a pair of children-sized cutlery in the form of a cute (though angry-looking) Optimus Prime, one as a spoon and another as a fork. They were branded as ''Generations'' products.
{{-}}

==Threezero==
===Premium===
*'''Optimus Prime - Classic Edition''' (Premium Scale, 2017)
**''Accessories:'' TBA
{{charstubtoys}}
{{-}}
===DLX===
*'''''War for Cybertron Trilogy'' Optimus Prime''' (DLX Scale, 2021)
**''Accessories:'' Ion Blaster, Energon Axe, Energon Shield, 5 pairs of hands, Action Stand
{{charstubtoys}}
{{-}}

===MDLX===
[[File:Threezero-MDLX-Optimus-Prime.jpg|thumb|upright]]
*'''Optimus Prime''' (2022)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)
:[[Threezero]]'s second figure for the MDLX line, this version of Optimus Prime is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Optimus Prime is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and accessories, namely his ion blaster, energon axe and Matrix of Leadership. He comes with a suite of hands in pairs: closed fists, splayed-out relaxed hands, and three different pairs meant to specifically hold each one of the aforementioned accessories. His chest is magnetically attached and as such can store the Matrix when not in use. Optimus also comes with his backpack piece disassembled in package.

:He was redecoed into [[Nemesis Prime (G1)#Threezero|Nemesis Prime]], [[Ultra Magnus (G1)/toys#Threezero|Ultra Magnus]], as well as his [[Optimus Prime (SG)#MDLX|''Shattered Glass'' self]].

:Optimus is [https://www.threezerohk.com/wp-content/uploads/2023/05/MDLX_Transformers_Starscream_17-768x512.jpg compatible] with [[Starscream (G1)/merchandise#Threezero|Starscream]] by way of the latter's wing assembly and head, in reference to "[[Megatron's Master Plan, Part 1]]".

::*''[https://www.threezerohk.com/product/transformers-mdlx-optimus-prime/ More information on MDLX Optimus Prime at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXNewYear}}
*'''Optimus Prime (Year of the Dragon Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:An all-gold {{W|Chinese New Year}} themed redeco of the above figure, featuring dragon patterns across his chest and left arm. According to the product description from Threezero, the right shoulder features the character for "Year of the Dragon" (龍), while his left shoulder features the fifth character (辰) of "Earthly Branches" in traditional Chinese sequencing (地支). Optimus features all the same accessories and functionality as before.

:This figure was limited to 1398 pieces worldwide, revealed in late 2023 and released in February 2024.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-year-of-the-dragon-edition/ More information on MDLX Optimus Prime (Year of the Dragon Edition) at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXVintage}}
*'''Optimus Prime (Vintage Animation Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:Yet another redeco of Prime, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

:Vintage Animation Edition Prime, [[Megatron (G1)/merchandise#MDLXVintage|Megatron]] and [[Bumblebee (G1)/merchandise#MDLXVintage|Bumblebee]] were revealed in a [https://newsroom.hasbro.com/news-releases/news-release-details/40-years-one-legacy-hasbro-celebrates-transformers-40th press release] from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-vintage-animation-edition/ More information on MDLX Optimus Prime (Vintage Animation Edition) at Threezero]
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXSleep}}
*'''Optimus Prime (Sleep Mode)''' (2025)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:A redeco of Prime in various shades of grey as a callback to his death in [[The Transformers: The Movie]]. All previous accessories and functionality carry over from before.

:This figure was revealed on Threezero's official website on February 2025.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-sleep-mode// More information on MDLX Optimus Prime (Sleep Mode) at Threezero]
{{MDLXOptimusPrimeMold}}

==Kidrobot==
[[File:Kidrobot GIJoe Enamel Pin Series.jpg|thumb|250px]]
===Enamel Pin Series===
*'''Optimus Prime''' ([[November 3]], [[2017]])
:*''Rarity:'' 1 in 20
:Released by [[Kidrobot]] in their Enamel Pin Series, this is a flat, enamel pin badge of Optimus Prime inspired by the art of [[Tom Scioli]]'s ''[[Transformers vs. G.I. Joe]]'', albeit with [[Super deformed|cutesy proportions]]. The pin series was [[Blindpacking|blindboxed]], with some pins being rarer than others.
{{--}}

===Vinyl Mini Series===
[[File:Kidrobot GI Joe Optimus Prime mini.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[November 14]], [[2017]])
:*''Rarity:'' 2 in 24
:*''Accessories'': Sword
:The same character design was reused for the Vinyl Mini Series, with Optimus receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. Optimus featured articulation in each shoulder, and also included his [[Minecraft]] voxel sword as first seen in "[[Everybody Hates Metroplex]]".
{{-}}

{{anchor|kidrobotgid}}
[[File:Kidrobot GI Joe Optimus Prime GID mini.jpg|thumb|upright=1]]
*'''Optimus Prime GID''' ([[November 14]], [[2017]])
:*''Rarity:'' 1 in 48
:*''Accessories'': Sword
:Optimus's Vinyl Mini figure was redecoed into "Optimus Prime GID", sharing many of the same paint applications, but now cast entirely out of glow in the dark plastic, more closely representing his apparition to [[Scarlett]] in "[[Headmasters (issue)|Headmasters]]" or his resurrection in "[[The War Never Ends]]". He was one of the rarer, but not the rarest, of the Vinyl Mini Series. His sword is still included.
{{-}}

===Vinyl Keychain Series===
[[File:Kidrobot GI Joe Optimus Prime keychain.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[December 1]], [[2017]])
:*''Rarity:'' 3 in 24
:Optimus was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation. His sword is also absent.
{{-}}

==Bouncing Ball Heads==
[[File:BouncingBallHead OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2017)
:"Bouncing Ball Head" Optimus Prime is a small, super deformed figurine with a removable head that doubles as a bouncy ball. An Autobot logo is tampographed on the back of his head and his name is written under his feet.

:He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique red color.

:Despite clearly representing Generation 1 characters, the collection is advertised as a 2015 ''[[Transformers: Robots in Disguise (2015 franchise)|Robots in Disguise]]'' product.
{{-}}

==Imaginarium Art==
[[File:ImaginariumOptimusPrime.jpg|upright=1.66|thumb|Brings new meaning to "no matter the cost."]]
*'''Optimus Prime''' (2017)

:[[Imaginarium Art]]'s first statue of Optimus Prime stands 24 inches tall and features multiple [[Light-emitting diode|LED]]s, two varieties of his laser rifle, and his energy axe. The statue's chestplate can open, revealing the Matrix of Leadership.

:The sculpted base for this figure also features the Combat Deck and Roller. Only 500 of this item were produced.
{{-}}

*'''Optimus Prime''' (2018)

:The "Legacy of Cybertron" statue is 12 inches tall, and its base can be connected to other statues in that series to produce a larger battle scene. 600 were produced.
{{-}}

==''Keshi Surprise''==
*'''Autobots''' (2018)

:The ''[[Keshi Surprise]]'' series by [[Super7]] consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980s [[Decoy (G1)|Decoy]]s. These [[blindpacking|blind-packed]] figures were sold individually or in cases depicting only their faction. Optimus Prime was available in red, yellow, blue, and purple, and included a foil trading card / sticker.
{{-}}
==Forever Clever==
{{anchor|Jumbochalk}}
*'''4 Pack Jumbo Chalk Set''' (2018)
:Released by [[Forever Clever]], the 4 Pack Jumbo Chalk Set includes a chalk holder featuring Optimus Prime. He's bundled with chalk holders of [[Megatron (G1)/merchandise#Jumbochalk|Megatron]], [[Bumblebee (G1)/merchandise#Jumbochalk|Bumblebee]] and [[Soundwave (G1)/merchandise#Jumbochalk|Soundwave]], and 4 pieces of appropriately colored chalk.
{{anchor|shapechalk}}
*'''5 Pack Shaped Chalk''' (2019)
:A piece of blue chalk formed into the shape of Optimus Prime. Bundled with [[Megatron (G1)/merchandise#shapechalk|Megatron]], [[Bumblebee (G1)/merchandise#shapechalk|Bumblebee]], [[Starscream (G1)/merchandise#shapechalk|Starscream]] and [[Windblade (G1)#shapechalk|Windblade]].
{{anchor|WallWalker}}
*'''Wall Walkers Optimus Prime''' (2018)
:Exclusively released in [[Blindpacking|blind bags]], ''Wall Walkers'' Optimus Prime has suction cups on its hands and feet so it can stick to walls. All its details are printed on, and besides its colors and printing, it is identical to the other Wall Walkers toys.
{{anchor|MiniWalker}}
[[File:MysteryMiniWalkers.jpg|upright=1|thumb]]
*'''Mystery Mini Walkers Optimus Prime''' (2021)
:Also a blind bag exclusive, ''Mystery Mini Walkers'' Optimus Prime is an eraser-like figure with movable arms and legs and printed-on details.
{{-}}
{{anchor|PBRoptimus}}
[[File:TF Authentics 2023 Pull-Back Racers Optimus Prime.jpg|upright=1|thumb|Up top!]]
*'''Pull-Back Racers Optimus Prime''' ([[2023]])
:This toy is a non-transforming rendition of Optimus Prime in a super-deformed rendition of his vehicle mode, albeit with his robot mode head and left arm sticking out of it. As the title suggests, this toy has a pull-back motor that will propel the toy forwards after being pulled back considerably enough.
{{-}}
{{anchor|ClipCharms}}
[[File:ForeverCleverClipCharms.jpg|upright=1|thumb]]
*'''Clip Charms Optimus Prime''' (2024)
:Released in blind bags, ''Clip Charms'' features a keychain of Optimus Prime's face with his name written beside it.
{{-}}
{{anchor|KeyBlasters}}
*'''Key Blasters''' (2024)
:A toy car released as part of the ''Key Blasters'' series prominently features Optimus Prime on its side and hood, with his name written on top in [[Alphabet#Autobot_script|Ancient Autobot]] script. A key is included. When it is inserted into the car, pushing the button on the key will propel the car forward. It was sold in a two-pack with a [[Starscream (G1)/merchandise#KeyBlasters|Starscream]] themed car.

===Squeezelings===
*'''Optimus Prime''' (Series 1, 2022)
:''[[Squeezelings]]'' Optimus Prime is a [[super deformed]], non-posable figure made of soft plastic and holding his ion blaster, released by [[Forever Clever]]. He was released in [[blindpacking|blind bags]] and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

{{-}}{{anchor|SqueezelingsBlackout}}
*'''Blackout Color Mode Optimus Prime''' (2022)
:A [[black redeco]] of the previous Optimus Prime figure. It was exclusive to an 8-figure gift set, featuring [[Optimus Prime (G1)/merchandise#Squeezelings|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings|Bumblebee]], [[Starscream (G1)/merchandise#Squeezelings|Starscream]], [[Megatron (G1)/merchandise#Squeezelings|Megatron]], and Blackout Color Mode versions of the three other characters.

{{-}}{{anchor|Squeezelings2}}
*'''Optimus Prime''' (Series 2, 2023)

:A figure of Optimus Prime in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongside [[Bumblebee (G1)/merchandise#Squeezelings2|Bumblebee]], [[Megatron (G1)/merchandise#Squeezelings2|Megatron]] and [[Optimus Primal (BW)/toys#Squeezelings|Optimus Primal]], in blind bags, or on blister card individually. It was later rereleased as part of the Squeezelings Sidekicks line, bundled with a comic book.

==''Transformers Trading Card Game''==
[[File:W1SOptimusPrimeAL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Autobot Leader''' (2018)
**'''Wave 1S: Starter Set'''
**''Rarity: '''''RT'''
**''Card Number: '''''T03/T04'''
**''Stars: ''7
:Optimus Prime, Autobot Leader is one of four double-sided character cards available in the ''[[Transformers Trading Card Game]]'' Starter Set.

:The artwork for the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile card game.
{{-}}
[[File:W1OptimusPrimeBL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2018)
**'''Wave 1'''
**''Rarity: '''''RT'''
**''Card Number: '''''T29/T40'''
**''Stars: ''13
:Optimus Prime, Battlefield Legend is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The card's Bot Mode line-art was done by [[Guido Guidi]], and Alt Mode line-art by [[Marcelo Matere]] and Alt Mode colors by [[Sara Pitre-Durocher]].

{{-}}
[[File:W1OptimusPrimeFF.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Freedom Fighter''' (2018)
**'''Wave 1'''
**''Rarity: '''''CT'''
**''Card Number: '''''T30/T40'''
**''Stars: ''12
:Optimus Prime, Freedom Fighter is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The Alt Mode artwork on the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile game, while the Bot-mode features line-art by [[Marcelo Matere]] and colors by [[Sara Pitre-Durocher]].
{{-}}
[[File:W2OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Gleaming Commander''' (2019)
**'''Wave 2: Rise of the Combiners'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''11

:Optimus Prime, Gleaming Commander was released as part of the ''[[Transformers Trading Card Game]]'' Wave 2: Rise of the Combiners. Like all other members of [[combiner]] teams released in the set, This version of Optimus Prime is a folding card, with the Bot and Alt modes being depicted when the card is folded in half, and a holofoil portion of the the combined mode depicted when unfolded. The reverse of Optimus Prime, Gleaming Commander depicts the center right portion of [[Optimus Maximus (G1)|Optimus Maximus']], of whom Optimus Prime forms the torso and head.

:The artwork for Bot Mode is reused from the [[Combiner Wars (franchise)|Combiner Wars]] Battle Core Optimus Prime toy's packaging art.

:Optimus Prime, Gleaming Commander can be used to form Optimus Maximus, Ultimate Defender with the use of the Action card [[Enigma of Combination|Sentinel Enigma]] while he and the other Wave 2 Sentinels are in Bot mode on the battlefield and/or KO area.
{{-}}
[[File:W3GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Infantry-Leader''' (2019)
**'''Wave 3: War for Cybertron: Siege I'''
**''Rarity: '''''RT'''
**''Card Number: '''''T07/T48'''
**''Stars: ''11
:General Optimus Prime, Infantry-Leader is one of forty-eight double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege I.

:The card's artwork is based on the ''[[War for Cybertron: Siege|Siege]]'' Voyager-class Optimus Prime toy, with the Bot Mode artwork being reused from the toy's packaging art.
{{-}}
[[File:W4GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Galactic Commander''' (2019)
**'''Wave 4: War for Cybertron: Siege II'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T06/T52'''
**''Stars: ''15

:General Optimus Prime, Galactic Commander is one of fifty-two double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege II.

:The card's artwork is based on the ''Siege'' Leader-class Galaxy Upgrade Optimus Prime toy, which in turn is based on the ''[[Transformers: Cybertron (franchise)|Cybertron]]'' version of Optimus Prime. The Bot Mode artwork is reused from said toy's packaging art, while Alt Mode received new art (lines by [[Marcelo Matere]] and colors by [[Volta]]).
{{-}}
[[File:EEOptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2019)
**'''Wave 1: Energon Edition'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T205/T06'''
**''Stars: ''13

:Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Optimus Prime, Battlefield Legend. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art by [[Marcelo Matere]]
{{-}}
[[File:W5OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Legendary Warrior''' (2020)
**'''Wave 5: Titan Masters Attack'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''12

:Optimus Prime, Legendary Warrior is one of forty-six double sided character cards released as part of Wave 5 of the ''[[Transformers Trading Card Game]]'', Titans Masters Attack. As a character with a body mode, Optimus Prime begins the game with a Titan Master attached in head mode. Once Optimus Prime is KO'd, said Titan Master is deployed.

:The card's artwork is based on the ''Titans Return'' Leader-class Powermaster Optimus Prime toy, with the body mode artwork being reused from the toy's packaging art.

:This card's set was originally set for an April 2020 release, however due to the global COVID-19 pandemic the release was pushed back to May 29, 2020.
{{-}}

==''Magic: The Gathering''==
[[File:MTG-Optimus-Inspiring-Leader.jpg|thumb|upright=1.66|Go ahead, turn me to my other face, see the rules nightmare that happens.]]
*'''Optimus Prime, Inspiring Leader''' (2018)
**''ID number:'' '''002/004'''
**''Set code:'' '''H18'''
**''Color identity:'' '''Red/White'''
**''Casting cost:'' '''{3}{R}{W}'''
**''Artist:'' [[Steve Argyle]]
:Part of the ''[[mtg:Heroes of the Realm|Heroes of the Realm]]'' series of commemorative cards, made by Wizards of the Coast for their employees as rewards for work on specific projects,<ref>[https://www.youtube.com/watch?v=4WNBRWoHq9E Gavin Verhey from Wizards of the Coast explains Heroes of the Realm]</ref> the 2018 "Optimus Prime, Inspiring Leader" card was given to the team behind the ''[[Transformers Trading Card Game]]''. Uniquely, Optimus Prime is "triple-faced" card: a ''Magic'' card on the front side, a ''Transformers Trading Card Game'' card representing Optimus in his alternate mode on the opposite side, and an oversized ''Transformers Trading Card Game'' card representing Optimus in robot mode found by unfolding the card.
:Optimus has the ability to change any permanent (card on the battlefield) to its other face, though sadly that doesn't mean he could convert ''himself'' into a ''Transformers Trading Card Game'' card during a ''Magic: The Gathering'' game.<ref>[https://www.reddit.com/r/magicTCG/comments/e5ovx5/heroes_of_the_realm_promo_optimus_prime_inspiring/ Post by u/Wizards_Drew] on [https://www.reddit.com/r/magicTCG/ r/magicTCG] on Reddit</ref>
:As with all ''Heroes of the Realm'' cards, "Optimus Prime, Inspiring Leader" is not legal to play in any format beyond a specific Commander rule; the cards are novelties designed to be read, rather than played.<ref>[https://markrosewater.tumblr.com/post/189543247703/hi-mark-i-have-2-questions-1-what-are-the Mark Rosewater on Tumblr]: "There’s no plans to release the Heroes of the Realm. The cards aren’t designed to be played. They’re designed to be read."</ref>
{{-}}
{{anchor|MTGHero}}
[[File:MTG-Optimus-Prime.jpg|thumb|upright=1.66|Transform and tap out!]]
*'''Optimus Prime, Hero / Optimus Prime, Autobot Leader''' (2022)
**''ID number:'' '''013/015'''
**''Set code:'' '''BOT'''
**''Color identity:'' '''Blue/Red/White'''
**''Casting cost:'' '''{3}{U}{R}{W}''' (front), '''{2}{R}{W}{B}''' (back with "More Than Meets the Eye")

:"Optimus Prime, Hero" is part of the 2022 ''[[Magic: The Gathering]]'' ''[[mtg:Universes Beyond|Universes Beyond]]'' ''[[mtg:Transformers|Transformers]]'' card set, found in Set Booster and Collector Booster packs of ''Magic''<nowiki>'s</nowiki> ''[[mtg:The Brothers' War|The Brothers' War]]'' set. It can be reversed to become "Optimus Prime, Autobot Leader", representing Optimus in vehicle mode. True to his character, he supports his allies with the "Bolster" mechanic and can return to the battlefield should he [[The many deaths of Optimus Prime|die]] in his Artifact Creature form.
:A variant of this card was available solely in Collector Booster packs, depicting [[Optimus Prime (SG)#Magic: The Gathering|''Shattered Glass'' Optimus Prime]].
{{-}}
{{anchor|MTGSLD}}
[[File:MTG-SLD-Optimus.jpg|thumb|upright=1.66|[[w:Golem|On sale just in time for Hanukkah]].]]
*'''Optimus Prime''' ''(Darksteel Colossus)'' (2022)
**''ID number:'' '''1081'''
**''Set code:'' '''SLD'''
**''Color identity:'' '''Colorless'''
**''Casting cost:'' '''{11}'''

:"Optimus Prime" is part of the ''[[Magic: The Gathering]]'' card pack ''Transformers: Optimus Prime vs. Megatron'', part of the ''[[mtg:Secret Lair|Secret Lair Drop Series]]'' ''[[mtg:Secret Lair Drop Series: December Superdrop 2022|December Superdrop 2022]]'' set. It was available exclusively from [https://secretlair.wizards.com secretlair.wizards.com] from [[December 5]], [[2022]] through [[January 6]], [[2023]].
:Optimus Prime is a [[mtg:Skinned card|reskin]] of the existing ''Magic'' card [https://scryfall.com/card/dst/109/darksteel-colossus Darksteel Colossus], using the same rules and counting as it for all gameplay purposes. Befitting the mighty leader of the Autobots, Optimus is incredibly powerful and impossible to destroy normally, but consequently has a very high casting cost. While the card has printing on both faces, depicting Optimus in robot mode and vehicle mode respectively, both have the same printed abilities and count as a single card for rules purposes—just choose which side you want to display when he enters the battlefield.
: The ''Optimus Prime vs. Megatron'' set also includes [[Megatron (G1)/merchandise#MTGSLD|Megatron]], [[AllSpark#Magic: The Gathering|The AllSpark]], and the bonus card [[Cybertron (planet)|Cybertron]].

{{--}}

==Flame Toys==

===Kuro Kara Kuri===
[[File:FlameToys-KuroKaraKuri-04-OptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (December 2019)
**''Number:'' '''04'''
**''Accessories:'' Large sword, stone, Swords (2), Large axe, Small axe (2), Ion cannon, pairs of hands (5), additional faces (2), Big Turbo Jet Axe with set of hands (exclusive),
**''Sculptor'': Chemical Attack
**''Painting'': Decomas Lab (Hiroyuki Hirose]

:Part of [[Flame Toys]]' ''Kuro Kara Kuri'' line of high-end, non-transforming action figures, Optimus Prime is an original design, though one that bears many similarities to the Don Figueroa design from [[IDW Publishing|IDW's]] ''The Transformers'' vol. 1. He has lots of die cast and LEDs in his head, chest matrix chamber, and both knees. He comes with a multitude of accessories, including a very large sword that can be plugged into a stone, two smaller swords resembling handheld versions of those used by the [[Optimus Prime (Movie)|live-action movie Optimus Prime]], a pair of hatchets resembling those of [[Optimus Prime (Animated)|''Animated'' Optimus Prime]], and of course G1 Optimus Prime's iconic Ion cannon. He also comes with an Orion Pax visorless alternative face, a battle damaged addition face, and five alternative pairs of hands in different poses.
:If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a very large Turbo Jet Axe.
:The reissue (which is labelled as such on the box) uses a slightly different red paint and is the recommended release for use with the Jet Power Armor (see below) due to the paint's extra durability.

{{-}}{{anchor|FlameToysBlackJetPower}}
[[File:FlameToys-KuroKaraKuri-OptimusPrimeJetPowerArmor.jpg|upright=1.66|thumb|And you thought the previous figure was expensive...]]

*'''Optimus Prime Jet Power Armor''' (January [[2024]])
**''Number:'' '''13'''
**''Accessories:'' ''everything...'', Blaster Cannon (exclusive)
**''Sculptor'': Chemical Attack
**''Coloring'': Masashi Watanabe

:Optimus Prime Jet Power Armor is a collection of 23 armour pieces that combine with the previously released ''Kuro Kara Kuri'' Optimus Prime similar to how he combined with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]'' which doubles the size of the figure. If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a blaster cannon.
:As mentioned above, due to addition paint durability, it is recommended to use the re-release of Optimus Prime.

{{-}}

===Furai Model===
[[File:FlameToys-FuraiModel-01-OptimusPrimeAttackMode.jpg|upright=1.66|thumb|'''''X-treme!''''']]
*'''Optimus Prime (Attack Mode)''' (September 2018)
**''Number:'' '''01'''
**''Accessories:'' Ion cannon, axe, 4 hands
{{toydesigner|[[Akira Amemiya]] (concept artist)}}

:Released as part of the ''Furai Model'' line by [[Flame Toys]], "Optimus Prime (Attack Mode)" is an articulated, non-transforming, Voyager Class-sized {{w|Gunpla}}-style model kit. Using parts made of hard ABS plastic and some polycaps, Optimus Prime (Attack Mode) is an original design created by Flame Toys in collaboration with [[Akira Amemiya]] of [[Studio Trigger]].

:For straight-assembly builders, Optimus Prime features a sheet of foil stickers for detail (notably the shoulder insignias), though the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers like ''Gundam Markers'' can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.

:This model kit was later [[redeco]]ed as [[Nemesis Prime (G1)#Flame Toys|Nemesis Prime (Attack Mode)]] and [[Optimus Prime (SG)#Flame Toys|Shattered Glass Optimus Prime (Attack Mode)]].

{{-}}{{anchor|Furai03}}
[[File:FlameToys-FuraiModel-03-OptimusPrimeIDW.jpg|upright=1.66|thumb]]
*'''Optimus Prime (IDW ver.)''' (March 2019)
**''Number:'' '''03'''
**''Accessories:'' Ion cannon, 4 hands
:Optimus Prime (IDW) is a plastic model kit based off of the Optimus Prime design created by [[Don Figueroa]] for [[IDW Publishing]]'s [[The Transformers (IDW)|2009-2011 ''The Transformers'' comic series]]. Similarly to the previous model kit, IDW Optimus is also Voyager-sized.
:This model kit was later redecoed as [[Nemesis Prime (G1)#Furai08|Nemesis Prime (IDW ver.)]] and [[Ultra Magnus (G1)/merchandise#Flame Toys|Ultra Magnus (IDW ver.)]], and it's also used to make the pre-built Furai Action figure (see below.)

{{-}}{{anchor|Furai12}}
[[File:FuraiG1Optimus.jpg|upright=1.66|thumb]]
*'''Optimus Prime (G1 ver.)''' (April 2020)
**''Number:'' '''12'''
**''Accessories:'' Ion cannon, 10 hands, axe
:Optimus Prime (G1) is another plastic model kit, this time a heavily stylized rendition of his cartoon appearance. Like the previous releases, he stands at an approximate Voyager height. He features opening chest windows which reveal sculpted detail of the [[Matrix of Leadership]].

{{-}}{{anchor|Furai16}}
*'''Optimus Prime IDW (Clear ver.)''' (August 2020)
**''Number:'' '''16'''
{{toystub}}

{{-}}
*'''Optimus Prime''' (20??)
:Part of the ''"Deformer Model Kit"'' subline of the ''Furai Model'' line, this Optimus Prime model is a cutesy, "[[super deformed]]" take on the Autobot leader.
{{comingsoontoy}}

===Furai Action===
[[File:FlameToys-FuraiAction-OptimusPrimeIDW.jpg|thumb|Just like one of those second-hand pre-built Gunplas you've seen in Akibahara!]]
*'''Optimus Prime (IDW ver.)''' (January 2020)
**''Accessories'': Ion cannon, 4 hands

:''Furai Action'' Optimus Prime is a pre-assembled redeco of the second ''Furai Model'' kit, with the weathering effects painted on.

{{-}}

==''Playskool Friends''==
[[File:Playskool-Friends-TF-Optimus-Prime.jpg|upright=1.88|thumb|A mouth on his mouthplate? That's a new one.]]
*'''Transformers Collector Pack''' (Canceled)

:Intended to be released as part of the 7-pack for the Playskool Friends lineup, this Optimus Prime is a very adorable non-transforming figurine. He was to come packed with Bumblebee, Arcee, and 4 Rescue Bots: Heatwave, Chase, Boulder and Blades.

:Given the inclusion of the four Rescue Bots, it was ''probably'' unclear if this Optimus Prime is meant to represent his ''Generation 1'' counterpart or his ''[[Optimus Prime (WFC)|Aligned]]'' counterpart.

{{canceledtoy}}

{{-}}

==''Uglydolls''==
[[File:Uglydolls plush collab.jpg|250px|thumb]]
*'''Ox as Optimus Prime''' (2018)
:A collaboration with ''[[Uglydolls]]'' for the 2018 San Diego Comic-Con, the character Ox is dressed as Optimus Prime. He is a limited run exclusive plush, along with Ice-Bat as [[Bumblebee (G1)/merchandise|Bumblebee]].
{{--}}

==McDonald's==
[[File:2018-McD-Authentics-Bumblebee-Optimus-Prime.jpg|250px|thumb]]
*'''Optimus Prime with a sword'''{{sic}} (Happy Meal Toy, 2018)
:Released as part of the [[McDonald's]] June 2018 Happy Meal Toys along with [[My Little Pony]], this Optimus Prime is a super-deformed figurine, and he features a gimmick on his left arm, which can be swung down to reveal a pop-out sword with the press of a button on his back. The sword can be retracted manually by raising the arm.

:The toy was available in South Korea, Italy, Russia, and Malaysia. This toy was rereleased in the US as [[Optimus Prime (Movie)/merchandise#McDonald's 2|Optimus Prime]] for the ''[[Bumblebee (franchise)|Bumblebee]]'' promotion. In Malaysia, this toy is one of the few items that can be found in several hobby toy shops.

{{-}}

==Jada Toys==
===''Metals Die Cast / Hollywood Rides''===
[[File:JadaHollywoodRidesG1OptimusPrime1-24.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2018)
:Released by [[Jada Toys]], this 1/24 scaled non-transforming die-cast truck with rubber tires is based on Optimus Prime's original form and features opening doors to reveal a highly detailed interior with a chromed steering wheel. Similar to the ''[[Robot Powered Machines#Mini-Vehicles|Robot Powered Machines]]'', the truck features a sculpted robot mode underneath. His smokestacks are ''insanely'' long.

:This mold was later redecoed as [[Nemesis Prime (G1)#Jada Toys|Nemesis Prime]].

{{-}}{{anchor|Jada1-32}}
[[File:JadaHollywoodRidesG1OptimusPrime1-32.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2018)
:A medium-sized replica of Optimus Prime much similar to the version above, but with shortened smokestacks. Unlike most other 1/32 vehicles, Optimus does not feature any opening doors, but still retains the sculpted robot mode on his chassis.

{{-}}{{anchor|JadaOP3pack}}
[[File:Jada 1-32 Optimus Prime 3pk.jpg|upright=1.44|thumb]]
*'''Western Star 5700XE Optimus Prime / Optimus Prime / Autobot Optimus Prime''' (Scale 1/32 Die Cast Vehicle 3‑pack, 2022)
:The 1/32 version of Generation 1 Optimus Prime was rereleased in a 3-pack alongside his [[Optimus Prime (Movie)/merchandise#JadaOP3pack|2007 and ''The Last Knight'']] counterparts, neither featuring any notable changes.

{{-}}{{anchor|JadaGhost124}}
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2024)
:A redeco of the 1/24 scaled replica above, this Optimus Prime was released in a crossover with the ''[[Ghostbusters]]'' franchise and is mostly based on the [[Optimus Prime (G1)/Generations toys#Collaborative|MP-10G Optimus Prime Ecto-35 Edition]] figure from the ''[[Transformers Collaborative|Collaborative]]'' toyline, itself based on the original [[Ecto-1]] color scheme, with the addition of some green ghost splatter between the front bumper and the left wheel. Instead of Autobot insignias, this version features the Ghostbusters logo on both sides and the back of the cab, as well as under the chassis right above his robot mode sculpture.

{{-}}{{anchor|JadaGhost132}}
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2024)
:This version of Optimus Prime is a redeco of the 1/32 scaled replica in the same Ghostbusters-inspired deco of the 1/24 version above. The only noticeable difference in colors is the lack of green on its headlights.

===''Metalfigs''===
[[File:JadaMetalfigsG1OptimusPrime.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (4" Die Cast Figure, 2020)
**''Accessories'': Ion blaster, Energon-axe
:''Metalfigs'' Optimus Prime is a 4-inch tall non-transforming super deformed die-cast figure with three points of articulation and light-up eyes.

:He comes with his signature ion blaster and Energon-axe weapons as accessories.

{{-}}{{anchor|DioramaScene}}
[[File:JadaMetalfigsG1DioramaScene.jpg|upright=1.44|thumb]]
*'''Diorama Scene''' (2 3/4" Die Cast Figure 4-pack, 2020)
**''Accessories'': Display backdrop
:A static die-cast figurine of Optimus Prime measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongside [[Bumblebee (G1)/merchandise#DioramaScene|Bumblebee]], [[Starscream (G1)/merchandise#Jada Toys|Starscream]] and [[Megatron (G1)/merchandise#Jada Toys|Megatron]].

:The packaging backdrop can be used as an additional display piece for the set.

{{-}}{{anchor|Metalfigs4pack}}
*'''Optimus Prime / Bumblebee / Optimus Primal / Megatron''' (2 3/4" Die Cast Figure 4-pack, 2022)
:This static Optimus Prime figurine is directly designed after the 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongside [[Bumblebee (G1)/merchandise#Metalfigs4pack|Bumblebee]], [[Optimus Primal (BW)/toys#Metalfigs|Optimus Primal]] and [[Megatron (G1)/merchandise#Metalfigs4pack|Megatron]].

{{-}}{{anchor|Metalfigssingle}}
*'''Optimus Prime''' (2 3/4" Die Cast Figure, 2023)
:The same super deformed Optimus Prime from the 4-pack above is also available in individual packaging.
{{-}}

===''Nano Hollywood Rides''===
[[File:JadaNanoHollywoodRidesG13pack.jpg|upright=1.44|thumb]]
*'''Starscream / Volkswagen Beetle Bumblebee / Optimus Prime''' (1.65" Die Cast Vehicle 3-pack, 2020)
:''Nano Hollywood Rides'' Optimus Prime is a small non-transforming die-cast truck measuring approximately 1.65 inches long. He was released in a 3-pack alongside [[Starscream (G1)/merchandise#Nano Hollywood Rides|Starscream]] and [[Bumblebee (G1)/merchandise#Nano Hollywood Rides|Bumblebee]]. Unfortunately, he doesn't feature a sculpted robot mode underneath like most other Jada vehicles do.
{{-}}

===''Nano Metalfigs''===
[[File:JadaNanoMetalfigsG1-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 1 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:''Nano Metalfigs'' Series 1 Optimus Prime is an incredibly small die-cast figurine molded holding his blaster. He has a little base attached to his feet for balancing reasons.

:He comes in an impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]]. This mold was later redecoed as [[Nemesis Prime (G1)#Nano Metalfigs|Nemesis Prime]] in the Series 2 18-pack.

{{-}}{{anchor|NanoMetalfigs2}}
[[File:JadaNanoMetalfigsSeries2G1BW-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 2 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:A second ''Nano Metalfigs'' Optimus Prime was released in Series 2, now wielding his Energon axe instead of his blaster and doing a bit more of an action pose.

:He comes in ''another'' impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{-}}{{anchor|NanoMetalfigs3}}
*'''Transformers Series 3 18-pack''' (4 cm Die Cast Figure Multipack, 2023)
:For the [[Jada Toys#Nano Metalfigs|third ''Nano Metalfigs'' multipack]], two Optimus Primes were made available at once. One is a re-release of the axe-wielding Series 2 figurine with no noticeable changes, and the other is a golden redeco of the blaster-holding Series 1 figurine.
{{-}}

===Converting RC Vehicle===
[[File:JadaConvertingOptimusPrime.jpg|upright=1.44|thumb|"We have [[Optimus Prime (G1)/toys#Robosen Collector's Edition|Robosen's Optimus Prime]] at home."]]
*'''Optimus Prime Converting R/C''' (2022)
**''Accessories:'' Remote controller
:This Optimus Prime is a remote controlled figure capable of automatically converting between robot mode and truck mode on command.

:He measures approximately 13 inches tall in robot mode and 12 inches long in truck mode, and features lights, sounds and voices.

{{--}}

==''ReAction''==
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2020, 2024)}}</ul>
:*''Accessories'': Ion Blaster

: Released in [[Super7]]'s line of multi-property 3.75-inch action figures, ''[[Super7#ReAction|ReAction]]'' Optimus Prime was naturally part of the first wave of ''Transformers'' figures. It is a non-converting action figure with 5 points of articulation (simple swivel shoulders, legs, and neck) and an [[Ion blaster]] accessory he can only hold in his right hand.

: It should be noted that despite being a "retro-styled" figure, the hard-plastic points on his helmet are very accurate to the animation model and therefore ''incredibly'' pointy, like, "would not be allowed on a toy for the 5-13 set" pointy.

: As with all releases in the ''ReAction'' toyline, Optimus comes packaged in a small cardback that emulates the nostalgic packaging style of [[Kenner]] ''[[Star Wars (franchise)|Star Wars]]'' action figures of the late 1970s to early '80s.

: In late 2024, this figure was reissued with no obvious changes, now in a [[blindpacking|blindpacked]] box assortment.

{{-}}{{anchor|ReActionCyberchrome}}
<ul class="iconlist">{{Bp-a1|'''Cyberchrome Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: This version of the Optimus ''ReAction'' figure features glossy metallic paint. That's about it. Whee.

: This figure was a [[Target]] exclusive in the US, released alongside the "[[Megatron (G1)/merchandise#ReActionCyberchrome|Cyberchrome Megatron]]" figure.

{{-}}{{anchor|ReActionFallenWave4}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: Released in the fourth wave of ''ReAction'', this all-gray version of Optimus features a new torso tooling with open chest panels revealing a (non-removable) Matrix of Leadership.

: This is the first of ''three'' different figures of the same concept to be sold under the name "Fallen Leader Optimus Prime"; the other two (below) are [[Target]] exclusives.

: This figure was initially solicited to retailers as "Dead Optimus Prime" before the slightly gentler name change... but "Dead Optimus Prime" is still what the figure is labeled on the cardback checklist as of wave 6.

{{-}}{{anchor|ReActionSanta}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Christmas]]-themed redeco, "Optimus Santa" features a red and green color scheme, a tufted Santa cap, and his ion blaster is striped to resemble a candy cane.

: This figure is a "shared exclusive" between, multiple online outlets. The card still refers to him as just "Optimus Prime" (albeit in cursive on a gift tag), but the toy is listed as "Optimus Santa" on Super7's website, and "Optimus Prime Santa" on other sites.

{{-}}{{anchor|ReActionFallenTarget}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: This Target-exclusive version of the "Fallen Leader" concept is just the normal Optimus figure with the closed-up chest done in the grays of the initial "Fallen Leader" figure. Exciting! And clearance fodder!

: This figure was released alongside the "[[Megatron (G1)/merchandise#ReActionChromeCommander|Chrome Commander Megatron]]" figure.

{{-}}{{anchor|ReActionGolden}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The third [[Target]]-exclusive Optimus Prime figure, this one has a head-to-toe gold redeco, depicting his appearance in the end of "[[The Golden Lagoon (episode)|The Golden Lagoon]]".

: This figure was released alongside the similarly-decoed [[Megatron (G1)/merchandise#ReActionGolden|"Golden Lagoon" Megatron]] figure.

{{-}}{{anchor|ReActionFallenTargetColor}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The second Target-exclusive "Fallen Leader" version of Optimus, and the third "Fallen Leader" overall (kinda morbid, y'all), and ''fourth'' Target-exclusive Optimus (overkill much?), this is the open-chest version of Optimus in his normal "living" color scheme, now better depicting the Matrix transfer moment when Prime was still (barely) alive.

: This figure was released alongside the thematically-similar [[Megatron (G1)/merchandise#ReActionFallenEvolution|"Fallen Evolution" Megatron]] figure.

{{-}}{{anchor|ReActionOpHalloween}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Halloween]]-themed redeco of the standard Optimus figure, in orange and black. Pumpkinmus Prime.

: This figure was a "shared exclusive", sold through multiple online retailers. Online listings call it "Optimus Prime (Halloween)", but the actual card simply says "Optimus Prime".

<ul class="iconlist">{{Bp-a1|'''Nucleon Quest Optimus Prime''' (2024)}}</ul>
:*''Accessories'': Ion blaster

: Wave eight of ''ReAction'' saw this black redeco of Optimus Prime, inspired by the 2001 [[Optimus Prime (G1)/toys#NucleonQuest|Nucleon Quest Super Convoy]] figure.

{{-}}

*'''Ark Base''' (Playset, 2024)

:*''Accessories'': Ion blaster

: The ''ReAction'' Ark Base playset included a version of Optimus Prime with his chest windows painted to add simulated reflective detail.
{{comingsoontoy}}
{{-}}

==''R.E.D. [Robot Enhanced Design]''==
[[File:TF-R.E.D.-Optimus-Prime.jpg|upright=1.66|thumb|Armored Convoy not included.]]
*'''Optimus Prime''' (2020)
**''Accessories'': Ion Blaster, Energon Axe, [[Matrix of Leadership/toys#R.E.D. .5BRobot Enhanced Design.5D|Matrix of Leadership]], 4 alternate hands
{{toydesigner|[[Emiliano Santalucia]] (concept artist)}}

:Released as part of the first wave of the ''[[Transformers R.E.D.]]'' line, Optimus Prime is a non-transforming 6-inch action figure akin to the ones from Hasbro's ''[[Marvel Comics|Marvel]] Legends'' and ''[[Star Wars (franchise)|Star Wars]] The Black Series'' lines. He is highly articulated and features extensive paint operations for [[show-accuracy]].

:Optimus comes with six hands altogether: a pair of closed fists, a pair of gently beckoning hands, a right hand for his included [[Ion blaster|Ion Blaster]] accessory, and a right hand with the index finger extended. He also features an [[Energon-axe|Energon Axe]], compatible with either wrist in place of his hand. Lastly, he includes a Matrix of Leadership, which can store in his chest thanks to his opening windows.

:As with all ''R.E.D.'' toys, Optimus Prime was a Walmart exclusive in Canada and the United States, and was later made available on [[Hasbro Pulse]] in limited quantities.

: This mold was used to make ''R.E.D.'' [[Ultra Magnus (G1)/merchandise#R.E.D. .5BRobot Enhanced Design.5D|Ultra Magnus]].
{{-}}

==''Super Cyborg''==
[[File:SuperCyborgOptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (2018)
**''Accessories'': Ion blaster, torso plate

:''Super Cyborg'' Optimus Prime is an 11-inch-tall non-transforming figure with 7 points of articulation. Its main distinguishing feature is that the entire front of the robot torso is removable, exposing not just the expected Matrix of Leadership but also many other sculpted mechanical details within Prime's body.

*'''Optimus Prime (clear)''' (2018)
**''Accessories'': Ion blaster, torso plate

:The transparent plastic version of this figure was exclusive to [[San Diego Comic-Con]] 2018.

*'''Optimus Prime (Dead)''' (2018)
**''Accessories'': Ion blaster, torso plate

:This dark grey version was exclusive to [[New York Comic Con]] 2018.

*'''Optimus Prime (Clear Red / Blue)''' (2023)
**''Accessories'': Ion blaster, torso plate

:This translucent version was exclusive to New York Comic Con 2023.
{{-}}

==Figural Bag Clip==
[[File:FiguralBagClip OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2020)
:Released by [[Monogram]], this 2.5" 3D foam bag clip takes the form of a chibi Optimus Prime.

:It was available only as part of a [[Blindpacking|mystery blind bag]] collection.
{{-}}
[[File:FiguralBagClip 2021 Optimus.JPG|thumb]]
*'''Optimus Prime''' (2021)
:A non-articulated, non-transforming 3" figure of Optimus Prime with an attached clip, also released by Monogram.

:Unlike the previous year's release it was sold on a standard cardback.

{{-}}

==D'elicce==
{{note|All Easter eggs listed below were exclusive to Lojas Americanas, a popular Brazilian chain store.}}
[[File:Brazilian Transformers Easter Eggs 2021.jpg|250px|thumb]]
*'''Transformers Easter egg''' (90g, 2021)
:In 2021, [[Brazil]]ian chocolate manufacturer Top Cau, under its kid-focused branch D'elicce, released a pair of ''Transformers''-themed [[Easter]] eggs that included a popcorn bucket of [[super deformed|cutesy proportions]] based on either Optimus Prime or Bumblebee.

{{-}}{{anchor|delicce2025}}
[[File:Brazilian Optimus Prime Easter Egg 2025.jpg|thumb|250px]]
*'''''Transformers'' Easter egg''' (90g, 2025)
:In 2025, D'elicce (or rather "Delice" as its spelled in some parts of this product) released an Optimus Prime-themed egg that came with a single piece of red plastic molded after the character's evergreen truck mode with trailer attached, inside of which the egg comes stored. Unfortunately, it means that not even his wheels can roll.

:The toy comes with a stickersheet that must be applied manually and is not packaged with pre-applied stickers as shown in the official stock photos.

{{-}}

==''Minimates''==
*'''Optimus Prime''' (Series 1, 2021)
**''Accessories'': Laser rifle, energy axe, stand

:Part of the first wave of Transformers [[Minimates]] from Diamond Select, this Optimus Prime is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. The Matrix of Leadership is printed on the Minimate figure's chest and is visible through the windows on the chest covering. Due to their small size, all 4 figures in each series are sold in the same blister card.

*'''VHS Minimates Box Set''' (2022)

:''Minimates'' Optimus Prime was rereleased as part of a [[San Diego Comic-Con]] 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles a [[Family Home Entertainment]] VHS tape. Only 2500 of this set were produced.
{{-}}

*'''Stasis Lock Optimus Prime''' (2023)
:Another San Diego Comic-Con brought another VHS-cassette-themed ''Minimates'' 4-pack exclusive, with another redeco of Optimus Prime - this time depicting him in "stasis lock" (meaning his grey dead color scheme, now with an opening empty chest compartment). Only 1500 of this set were produced.
{{-}}

==''ULTIMATES!''==
[[File:Super7 Ultimates Optimus Prime (G1).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion blaster, energon axe, Matrix of Leadership, surfboard, jetpack, basketball, energy restraints, left & right fists, 2 open hands, right gripping hand, left pointing hand, alternate head

: Part of the first wave of ''[[Super7#Transformers ULTIMATES!|Transformers ULTIMATES!]]'' from [[Super7]], Optimus Prime is a 7-inch-tall action figure based on his cartoon model. He features multi-directional joints at the neck, shoulders, wrists, hips, and ankles; plus swivel biceps, elbows, knees, and a bit of ab crunch. His hands pop out at the wrists so they can be replaced with his additional spare hands in different poses (or the obligatory Energon Axe), and his head can be replaced with an alternate based on the original Optimus toy.

: He also features a ''lot'' of accessories, more than any other toy in the wave, including a number of episode-specific ones: [[Sideswipe (G1)|Sideswipe's]] jetpack from "[[More than Meets the Eye, Part 3]]", a ridable surfboard from "[[The Ultimate Doom, Part 3]]", energy restraints from "[[S.O.S. Dinobots]]", and his giant basketball from "[[The Master Builders (episode)|The Master Builders]]". He also includes a miniature [[Spike Witwicky (G1)#ULTIMATES!|Spike Witwicky]] figurine.

: Preorders for Optimus Prime (and the rest of Wave 1) opened on [[January 29]] 2021, and closed on [[February 28]], with the toys purportedly shipping in winter of that year but not actually arriving until May 2022.

{{-}}{{anchor|Alligaticon}}
[[File:Ultimates Alligaticon.jpg|upright=1.66|thumb]]
<ul class="iconlist">{{Bp-d1|'''Alligaticon''' (2022)}}</ul>
:*''Accessories'': Optimus Prime head; Optimus Prime rifle; Decepticon tower tip w/ arm; [[Battle taxi]]

: Part of the third wave of ''ULTIMATES!'', the [[Alligaticon#Merchandise|Alligaticon]] is a 10-inch-long non-transforming figure made to emulate the the Optimus-parts creature's cartoon model to pretty exacting detail (including the ''lack'' of detail on most of its flat surfaces). It makes ample use of multi-swivel joints to give its limbs a relatively wide range of motion, plus extensive tail jointing, a mid-body bend, some neck waggle, and an opening jaw.

: It comes with multiple "[[City of Steel (episode)|City of Steel]]"-themed accessories, including a tower with Optimus's arm attached to it. The arm is permanently attached, but the hand uses the same wrist-joint as the individual Optimus figure, and can be popped off and replaced with his other hands if you like (Optimus's wrist-pegs are larger than many other figures', so sadly cross-compatibility is limited at best). Curiously, while the arm appears to be identical to the prior figure's arm, the gun is not, having a trigger guard the original version lacks.

: It also comes with Optimus's disembodied head on a ball-jointed "neck" with trailing wires. Like the arm, the head is the same mold as the original Optimus, but this time cast in clear-blue plastic painted over, with a small gap in the back of the head to attempt [[light-piping]]... but depending on the strength of the light, it might just shine through the paint. Since it's the same mold, one could theoretically swap it out, but trying to push that wire-mass back into the socket seems like it'd be a bit of a pain in the neck (wocka wocka!).

: Preorders for the Alligaticon (and the rest of Wave 3) opened on [[December 1]], 2021, with the toys projected to ship in fall 2022... and ''actually'' shipping in November 202''3''.

{{-}}{{anchor|Ultimates2}}
[[File:Super7 Ultimates Optimus Prime (Fallen Leader).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Fallen Leader)''' (2023)}}</ul>
:*''Accessories'': 2 fists, 2 open hands, 2 Matrix-grip hands, trigger-grip right hand, Matrix of Leadership, Matrix cover, ion blaster

: This retool and redeco of ''ULTIMATES!'' Optimus Prime is the latest of several representations of his dead body from "[[The Transformers: The Movie]]," now with a greyscale paint scheme, a heavily damaged left torso section, and cracks all over him (and on his rifle too for good measure). His chest is redesigned to allow it to open and reveal the Matrix.

: Preorders opened in June 2022, with the expectation that of figures shipping in May 2023.... but actually January 2024
{{-}}

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': ion blaster

: The original ''ULTIMATES!'' Optimus Prime was repackaged as a "Transformers Deluxe" figure, physically identical to the first release but now lacking all accessories except the gun. Its new packaging resembles a VHS clamshell box; specifically, the colors and trade dress strongly resemble the [[Video Gems]] tapes, while the character artwork and subtitle are taken directly from the [[The Original Transformers|Kid Rhino]] tapes.

: This piece was exclusive to, of all things, Macy's.

==''Pop!''==
[[File:Funko Pop Optimus Prime G1.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:Released as part of the ''Pop! Retro Toys'' segment, [[Funko Pop!|Funko]]'s ''Pop!'' Optimus Prime is a super deformed vinyl figure based on his original Generation 1 toy, though his eyes are painted blue like in the cartoon.

:This mold was later redecoed as [[Nemesis Prime (G1)#Pop!|Nemesis Prime]].

{{-}}{{anchor|PopMetallic}}
[[File:Funko Pop Amazon Metallic Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:An [[Amazon (website)|Amazon]] exclusive redeco of the figure above, this version of Optimus Prime features a more metallic paintjob.

{{-}}{{anchor|PopGIJoe}}
[[File:Funko Pop Mystery Box Optimus Prime Cobra Commander.jpg|thumb|upright=1.44]]
*'''Funko Mystery Box: Transformers vs. G.I. Joe''' (Giftset, 2021)
**''ID number:'' '''44'''

:Available only as part of a GameStop exclusive giftset, this retooled Optimus Prime comes with his Energon axe attached to his right hand instead of his ion blaster and comes [[Blindpacking|blindpacked]] inside a ''Transformers vs. [[G.I. Joe (franchise)|G.I. Joe]]''-themed lunch box alongside a ''Pop!'' [[Cobra Commander#Pop!|Cobra Commander]] figure, a Decepticon logo decal, a Cobra logo keychain, and a set of four pins of Optimus Prime, Cobra Commander, [[Megatron (G1)/merchandise#Pop!|Megatron]] and [[Duke (G.I. Joe)#Pop!|Duke]].

{{-}}{{anchor|PopJumbo}}
[[File:Funko Pop Jumbo 10-inch Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (Jumbo size, 2021)
**''ID number:'' '''71'''

:A larger version of the regular ''Pop!'' Optimus Prime measuring 10-inches tall.

{{-}}{{anchor|PopKeychain}}
[[File:Funko Pocket Pop Keychain Optimus Prime.jpg|thumb|upright=1.11]]
*'''Optimus Prime''' (Pocket ''Pop!'' Keychain, 2021)

:A smaller version of the regular ''Pop!'' Optimus Prime with a keychain attached to his head.

{{-}}{{anchor|Digital Pop!}}
*'''Optimus Prime''' ([[Funko Pop!#Digital Pop! NFTs|Digital ''Pop!'']], 2022)
**''Rarity:''
***''Monochrome:'' '''Common'''
***''Static:'' '''Common'''
***''Glowing:'' '''Uncommon'''
***''Chrome:'' '''Rare'''
***''Original:'' '''Epic'''
***''Monochrome, Matrix-opening:'' '''Epic'''
***''Gold, Matrix-opening:'' '''Grail'''
:{{W|Non-fungible token|NFT}}s depicting Optimus Prime in the Funko style. Some variants are depicted opening the Matrix over Cybertron, one of which (the Grail one) could be redeemed for a chance to get a physical version of the depicted figure. Said variant was limited to 999 pieces.
<center><gallery heights=200>
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_MONOCHROME.gif|Remember [[The many deaths of Optimus Prime#The Transformers: The Movie|this one?]]
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_STATIC.gif|Not gray, but still may as well be dead.
File:TRANSFORMERS_UNCOMMON_OPTIMUS-PRIME_GLOW.gif
File:TRANSFORMERS_RARE_OPTIMUS-PRIME_REDCHROME.gif|[[The Return of Optimus Prime, Part 1|Oops.]]
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME_ORIGINAL.gif
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME-GOLDVARIANT_MONOCHROME.gif
File:TRANSFORMERS_GRAIL_OPTIMUS-PRIME-GOLDVARIANT_ORIGINAL.gif
</gallery></center>
{{-}}{{anchor|PopDigital}}
[[File:Funko Pop Digital Optimus Prime.jpg|thumb|upright=1.44|Stealing NFTs is the right of all sentient beings.]]
*'''Optimus Prime''' (2022)
**''ID number:'' '''49'''

:Part of the ''Pop! Digital'' segment, this regular-sized vinyl figure portrays Optimus opening the Matrix of Leadership and is entirely painted gold. It could only be acquired by redeeming the Grail NFT above.

{{-}}{{anchor|Pop! Pin}}
[[File:Funko-Pop-Pin-Optimus-Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (''Pop!'' Pin, 2022)
**''ID number:'' '''18'''
**''Accessories:'' Display stand
:A metallic enamel pin based on Optimus Prime's vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

:A "redeco" of this pin as [[Nemesis Prime (G1)#Pop! Pin|Nemesis Prime]] was also released as a limited edition chase variant.

{{-}}{{anchor|Pop! Masks}}
[[File:Funko Pop mask Optimus Prime.jpg|thumb|upright=1]]
*'''Optimus Prime''' (''Pop!'' Masks, 2022)
:Released by Disguise Costumes in collaboration with Funko and exclusive to Walmart, ''Pop!'' Masks Optimus Prime is a large half face mask based on the head of the vinyl figure.

{{-}}{{anchor|Pop! Hallmark}}
*'''Optimus Prime''' (Christmas tree ornament, 2022)
:Released by [[Hallmark]] and also exclusive to Walmart, this Optimus Prime Christmas tree ornament is virtually identical to the vinyl figure in appearance.

{{-}}{{anchor|Fundays1}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Exclusive to a Funko-oriented event called Fundays, this regular-sized vinyl figure portrays [[Freddy Funko]] cosplaying as Optimus Prime. The body of this figure is the same as the regular Optimus, while the head has been modified to incorporate Freddy's face. This regular version was limited to 1500 pieces.

{{-}}{{anchor|Fundays2}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:A metallic version of the Freddy Funko as Optimus Prime figure was also available, now limited to only 500 pieces.

{{-}}{{anchor|Fundays3}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Also available and limited to 500 pieces was a version of Freddy Funko as Optimus Prime that glows in the dark.

{{-}}{{anchor|PopPotato}}
*'''Mr. Potato Head Optimus Prime''' (''Pop! Digital Retro Toys'', 2022)
**''Rarity:'' '''Grail'''
**''ID number:'' '''127'''
:Similar in concept to other [[Mr. Potato Head]] toys, this vinyl figure is a representation of said character taking the appearance of Optimus Prime, except it can't be taken apart piece by piece.

:This figure is limited to 1550 units and can only be acquired redeeming an NFT representing this version of the character.

{{-}}{{anchor|PopLights}}
*'''Optimus Prime''' (Lights and Sounds, 2023)
**''ID number:'' '''120'''
**''Accessories:'' Base
:A standard-sized figure released in the ''Retro Toys'' line, "Lights and Sounds" Optimus Prime features... well, lights and sounds. He also includes a display base, and is posed with his left arm pointing forward and his right hand holding his blaster.

:This figure is exclusive to the Funko Shop online store.

{{-}}{{anchor|Pop! Tee}}
*'''Optimus Prime Tee''' (T-shirt, 2023)
:A T-shirt available on Funko's online store, it features artwork of ''Pop!'' Optimus Prime in the same pose and style as the original Generation 1 Optimus Prime packaging art.

{{-}}{{anchor|Pop40Years}}
*'''Optimus Prime''' (2024)
**''ID number:'' '''131'''

:Released in celebration of the 40 years of the franchise, this regular sized ''Pop! Retro Toys'' Optimus Prime is a similar mold to the original release, but is doing a different pose and features toy-accurate yellow eyes.

{{-}}{{anchor|Pop40Years2Pack}}
*'''Optimus Prime & Megatron''' (2-pack, 2024)

:A Hot Topic exclusive release of the 40th anniversary Optimus Prime and [[Megatron (G1)/merchandise#Pop40Years2Pack|Megatron]] vinyls with a metallic finish to their paintings.
{{--}}

==Modern Icons==
[[File:Modern_Icons_Optimus_Prime_helmet.jpg|thumb|upright=1.66|GIVE ME MY FACE.]]
*'''Optimus Prime Modern Icons Replica Helmet''' (December 27, 2021)
:A collaboration between Hasbro and statue and replica brand Modern Icons, this is a wearable helmet for adult collectors, based on Optimus Prime's head. It features light-up eyes and authentic sounds and phrases.

:Originally due for release on August 16, 2021, the Optimus Prime helmet was delayed until December 27 (as was [[Megatron (G1)/merchandise#Modern Icons|its Megatron counterpart]]). The helmet is a GameStop exclusive in the United States.
{{--}}

==''Super Shogun''==
*'''Optimus Prime''' (2021)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Another "retro-styled" non-transforming figure by [[Super7]], ''Super Shogun'' Optimus Prime is meant to be an homage to the 1970s "{{w|Shogun Warriors (toys)|Shogun Warriors}}" toyline. To match the famous features of those older toys, this Optimus stands 24" tall and is mostly made of hollow plastic, with 3 points of articulation, wheels on his feet, and a spring-loaded firing left fist. His chest doors open to reveal a removable Matrix of Leadership. Suggested retail price was $350 - hopefully if you're old enough to remember "Shogun Warriors" you've gotten a good job by now.

*'''Optimus Prime (Fallen Leader)''' (2022)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Continuing the trend from their ''ReAction'' and ''ULTIMATES!'' Optimus Prime figures above, Super7 also produced a grey redeco of ''Super Shogun'' Optimus Prime representing his dead body. {{-}}

==''Zōteki''==
[[File:ZOTEKI-024-Optimus-Prime.jpg|thumb|upright=1.66|I farted.]]
*'''Optimus Prime''' ([[2021]])
**''ID number'': '''024'''

:A collaboration between [[Hasbro]] and statue/replica brand [[Jazware]], ''[[The Transformers (franchise)|The Transformers]]'' was added as a part of the ''[[Zōteki]]'' line alongside other iconic brands such as [[Marvel Comics|Marvel]], to recreate some of the main "Generation 1" characters. The 24th figure of the ''Zōteki'' line; Optimus Prime wields his iconic [[Ion blaster]].

:Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
{{-}}

==Eaglemoss==
[[File:EaglemossChess OptimusPrime.jpg|upright=1.11|thumb]]
* '''Transformers Gen-1 Chess Set''' (<s>2021</s>)
:In the planned [[Chess#Eaglemoss|Transformers Chess Set]] by [[Eaglemoss]], a relatively large and very well detailed statue of Optimus Prime was slated to be the standard King piece on the Autobot side.

:A Kickstarter campaign to raise the necessary funds for this project was launched, but failed to meet its goal by September 24, 2021 and the whole thing was canceled. The Optimus Prime piece managed to technically get a very limited release, however, as some online influencers in the ''Transformers'' fandom received copies gifted to them by Eaglemoss during the Kickstarter campaign.
{{canceledtoy}}
{{-}}

==e-HOBBY==
===''Transformers Character Card''===
{{anchor|TCC G1}}
[[File:Transformers Character Card G1 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Convoy & Megatron Set''' ([[January 25]], [[2022]])
**''ID number:'' '''01 & 02'''
{{toydesigner|[[Shin Sasaki]] (illustration)}}

:Released as part of the first wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Roller (G1)|Roller]]) and [[Megatron (G1)|Megatron]] (with [[Starscream (G1)|Starscream]], [[Thundercracker (G1)|Thundercracker]] and [[Skywarp (G1)|Skywarp]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#01|Translation of G1 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Laser}}
[[File:Transformers Character Card G2 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Battle Convoy & Megatron Set''' ([[March 14]], 2022)
**''ID number:'' '''11 & 12'''

:Released as part of the second wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime and Megatron in their ''[[Transformers: Generation 2 (franchise)|Generation 2]]'' bodies along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#LaserOptimusPrime|Laser Optimus Prime]]" toy.
::*''[[Source:Transformers Character Card#11|Translation of G2 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Black}}
[[File:Transformers Character Card Megatron Black and Convoy Black.jpg|upright=1|thumb]]
*'''Transformers Card Binder (includes 2 special cards)''' ([[November 1]], 2022)
**''ID number:'' '''EX'''

:Released in its fifth wave as something of a "season one finale" to the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this 40-slot binder intended to contain the entire ''Character Card'' series thus far is packed with a pair of holographic trading cards depicting super-deformed art of Optimus Prime and Megatron in the forms of their first e-HOBBY exclusive toys along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the ''[[Hybrid Style]]'' "[[Optimus Prime (G1)/toys#THS02B|Convoy Black Version]]" toy.
::*''[[Source:Transformers Character Card#EXOP|Translation of Optimus Prime Black Version's Transformers Character Card]]''
{{-}}

{{anchor|TCC Hero}}
[[File:Transformers Character Card Jhiaxus and Hero OP.jpg|upright=1|thumb]]
*'''Jhiaxus & Convoy Missile Trailer Set''' ([[February 6]], [[2023]])
**''ID number:'' '''41 & 42'''

:Released as part of the sixth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Jhiaxus (G2)|Jhiaxus]] and ''Generation 2'' Optimus Prime along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#HeroOptimusPrime|Hero Optimus Prime]] toy.
::*''[[Source:Transformers Character Card#42|Translation of Hero Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Matrix}}
[[File:Transformers Character Card Matrix and Alpha Trion.jpg|upright=1|thumb]]
*'''Alpha Trin & Convoy Set''' ([[April 22]], 2023)
**''ID number:'' '''49 & 50'''

:Released as part of the seventh wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of "[[Alpha Trion|Alpha Trin]]" and Optimus Prime touting the [[Matrix of Leadership]] along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus's card notably eschews the line's usual [[Power Plans]]-inspired motif for a reproduction of the original 1984 [[Package art#Hasbro|toy packaging mural]] in celebration of the line's 50th release.
::*''[[Source:Transformers Character Card#50|Translation of Optimus Prime (with Matrix)'s Transformers Character Card]]''

{{-}}

{{anchor|TCC Orion}}
[[File:Transformers Character Card Hot Rod and Orion Pax.jpg|upright=1|thumb]]
*'''Orion Pax & Hot Rodimus Set''' ([[August 14]], 2023)
**''ID number:'' '''59 & 60'''

:Released as part of the eighth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Orion Pax and "[[Hot Rod (G1)|Hot Rodimus]]" along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#59|Translation of Orion Pax's Transformers Character Card]]''

{{-}}

{{anchor|TCC Action}}
[[File:Transformers Character Card Action Master Megatron and OP.jpg|upright=1|thumb]]
*'''Convoy (Action Master) & Megatron (Action Master) Set''' ([[December 28]], [[2024]])
**''ID number:'' '''93 & 94'''

:Released as part of the thirteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Armored Convoy]]) and Megatron (with [[Neutro-Fusion Tank]]) in their [[Action Master]] forms along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#93|Translation of Action Master Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Autobot}}
[[File:Transformers Character Card Autobots and Primus.jpg|upright=1|thumb]]
*'''Primus and Cybertron Army Set''' ([[February]], [[2025]])
**''ID number:'' '''101 & 102'''

:Released as part of the fourteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Primus]] in the form of his [[Primus#2010|"Creator" toy]] and the Generation 1 [[Autobot]]s (as represented by Optimus Prime, [[Blaster (G1)|Blaster]], [[Eject (G1)|Eject]], [[Grimlock (G1)|Grimlock]], [[Prowl (G1)|Prowl]], [[Crossblades (G1)|Crossblades]], [[Jazz (G1)|Jazz]] and [[Turbo Board]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#102|Translation of the Autobots' Transformers Character Card]]''

{{comingsoontoy}}
{{--}}

===Acrylic keychain series===
[[File:E-Hobby Optimus Prime and Bumblebee keychains.jpg|upright=1|thumb]]
*'''Convoy & Bumble''' ([[October]], [[2022]])

:Released as part of the first wave of an [[e-HOBBY]] exclusive series, this pair of keychains depicts character art and assets re-used from Optimus Prime and [[Bumblebee (G1)|Bumblebee's]] [[The Transformers: Masterpiece|''Masterpiece'']] releases, namely [[Optimus Prime (G1)/toys#MP44|MP-44 Convoy]] and [[Bumblebee (G1)/toys#MP45|MP-45 Bumble and Spike 2.0]] respectively.

{{--}}

==''Authentics''==
{{anchor|ClipBot}}
[[File:ClipBotsPrime.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2018)

:''Clip Bots'' Optimus Prime is a small [[super deformed]] plush that can be "transformed" into a little tractor trailer by flipping it inside out. It features a plastic clip so it can dangle from whatever you clip it to.
{{-}}
{{anchor|22Mask}}
[[File:Authentics Optimus Prime Mask 2022.jpg|upright=1|thumb|Unlike some Optimus Primes, he'll [[Transformers: Revenge of the Fallen (film)#Quotes|give you his face]] instead.]]
*'''Optimus Prime''' (2022)

:Modeled after Optimus Prime's evergreen design, this [[roleplay toy]] mask was released along side an [[Bumblebee (G1)/merchandise#22Mask|Bumblebee]] version.
{{-}}
{{anchor|AquaPals}}
[[File:AquaPalsLargeOptimus.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2023)

''Aqua Pals'' Optimus Prime was released by [[WAHU]]. It is a plush made out of material designed to dry quickly, allowing it to be played with in water. The large plush is 24 inches tall.
{{-}}

{{anchor|DogToys}}
[[File:CrunchandsqueakOptimusPrime.jpg|upright=1|thumb]]

*'''Crunch & Squeak Optimus Prime''' (2023)

Manufactured by [[Gramercy Products]], ''Crunch and Squeak'' Optimus Prime is a simple dog toy, with a water bottle inside to be crunched. Because of this, its legs are fully attatched to each other. The embroidery color for the outline of the eyes varies, coming in gray or blue.
{{-}}
*'''Squeak & Tug Optimus Prime''' (2023)

''Squeak & Tug'' Optimus Prime is another dog toy by Gramercy Products. It has two rope knots connected from the bottom of each of its legs, for tugging purposes. It also has a mouth ''on top'' of its faceplate.

{{anchor|24Mask}}
[[File:Authentics_Optimus_Prime_Mask_2024.jpg|upright=1|thumb]]
*'''Optimus Prime Mask''' ([[2024]])

:Manufactured by [[Peachtree Playthings]], this mask is a completely new mold based on Optimus Prime's evergreen design, though it's a bit more stylized then the 2022 version. It was found at discount stores such as Dollar Tree with no prior announcement. As with the previous mask, it was released along side an [[Bumblebee (G1)/merchandise#24Mask|Bumblebee]] version.
{{-}}
{{anchor|CBoptimus}}
[[File:Authentics Cyber Battlers Optimus.jpeg|upright=1|thumb]]
*'''Cybertron Battlers Optimus Prime''' ([[2022]])
:Released in the ''Cybertron Battlers'' subline of ''Authentics'', this vinyl figure is a non-transforming, 5.5 inch rendition of Optimus Prime in his evergreen design with limited points of articulation. He has an Energon Axe molded into his right hand.

:He comes packaged either individually with a tag, or in twos in a box together with [[Bumblebee (G1)/merchandise#Authentics|Bumblebee]] and [[Megatron (G1)/merchandise#Authentics|Megatron]].
{{-}}

{{anchor|Teeturtlereverse}}
[[File:Small_Reversible_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Reversible Plushie Optimus Prime''' (2025)

:Released by [[TeeTurtle]], ''Reversible Plushie'' Optimus Prime is a round, [[super deformed]] plush, that can be turned inside out to reveal a truck alternate mode. A 3 inch version was released in blind boxes, while a 6 inch version was made available exclusively at [[Walmart]]. It appears to be based on Optimus Prime's [[evergreen]] design, with a license plate that reads 'ROLL OUT'.
{{-}}
{{anchor|Teeturtlecloudhead}}
[[File:Cloudheads_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Cloudheads Optimus Prime''' (2025)

:Also released by [[TeeTurtle]], ''Cloudheads'' Optimus Prime is another [[super deformed]] plush based off of Optimus's [[evergreen]] design. It is 5 inches tall. It has a large head, and its body is weighted with glass beads.
{{-}}

==Nendoroid==
[[File:Nendoroid G1 Optimus Prime.jpg|upright=1.66|thumb]]
*'''Nendoroid Optimus Prime (G1 Ver.)''' ([[2022]])
**''Nendoroid ID Number'': '''1765'''
**''Accessories'': Ion blaster, Energon-axe, pointing hand

:[[Nendoroid]] Optimus Prime is a [[super deformed]], adorable rendition of the original Autobot commander. It is the first Nendoroid figure released for a "Generation 1" character, as the first Nendoroid figures for ''Transformers'' were for the ''[[Bumblebee (film)|Bumblebee]]'' movie.

:As with most Nendoroids, Optimus Prime can interchange body parts with compatible figures, and comes with an alternative "pointing hand" accessory to aid with specific posing. The figure is packed with Optimus's trademark Ion blaster and Energon-axe weapons (generically referred to as a gun and an energy axe by the Good Smile Company website), the latter of which replaces Optimus's hand when wielded. He also features articulation at the head, knees, shoulders, elbows, and even his chest.

:This mold was later redecoed as [[Nemesis Prime (G1)#Nendoroid|Nemesis Prime]].
{{-}}

==Icon Heroes==
*'''Optimus Prime X Bumblebee Retro Pin Set''' (2022)
: A hard enamel pin based on Optimus Prime's original G1 package art made by Icon Heroes. It comes carded with a [[Bumblebee (G1)/merchandise#Icon Heroes|Bumblebee]] pin.

: This pin was also available in [[Nemesis Prime (G1)#Icon Heroes|Nemesis Prime]] colors.
{{comingsoontoy}}

{{-}}
[[File:Icon-Heroes-Optimus-Prime-Action-Statue.jpg|upright=1.11|thumb|''Of course'' we need another superdeformed Optimus Prime statue, why do you ask?]]
*'''Optimus Prime Action Statue''' ([[2023]])
: A 12" tall polystone statue of Optimus Prime holding his ion blaster and standing over an Autobot insignia base. The statue is slighty superdeformed with an unusually large head and features some neck articulation.

: Each sample is going to be individually numbered and come with a certificate of authenticity.
{{comingsoontoy}}

{{-}}

==Just Play==
{{anchor|Podpals}}
[[File:PodpalsOptimusLarge.jpg|upright=1|thumb]]

*'''Podpals Optimus Prime''' (2023)

Made by [[Just Play]], ''Podpals'' Optimus Prime is a rounded plush. It has tiny flaps of fabric for its legs and head details, while other details are printed on. There are two versions, an 8 inch version and a 3 inch version. They are identical besides their size.

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>

:Optimus Prime is a small, soft plastic figure, 2" tall, with no articulation. It's overall based on his appearance in the G1 cartoon. He does have a noticable lack of paint apps; most notably the windows on his chest not being painted at all.

:The packaging is G1-styled with the classic black-red gradient and the G1 Optimus Prime toy in the top right corner.

[[File:JustPlay_G1_Optimus_Prime.jpg|thumb|upright=.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>

:This figure is identical to the original release. Unlike the original release, however, he also comes with a foil sticker depicting his G1 design on a card with a sort of profile picture on the back and text underneath it saying "OPTIMUS PRIME IS THE LEADER OF THE AUTOBOTS." The packaging is also different as it no longer features Optimus Prime (having been replaced with a block advertising the new card).
: There's a variant of this found at stores like Dollar Tree where the block advertising the card is moved to the top left with a red circle that says "$1.25" in it in the top right instead.

{{-}}

==Kotobukiya==
===Bishoujo Series===
[[File:Bishoujo-Series-OptimusPrime.jpg|upright=1.3|thumb|Looking this good is the right of all sentient beings.]]
*'''Bishoujo Series Transformers Convoy/Optimus Prime''' (January 2023)
**''Accessories'': Alternate masked face
**''Known designers:'' [[Shunya Yamashita]] (artist)

:''[[Kotobukiya]] [[Bishoujo Series]]'' Convoy/Optimus Prime renders the classic Autobot commander as a cute anime girl (formally termed as a ''{{w|Bishōjo}}''). Bishoujo Optimus's necklace represents the [[Matrix of Leadership]], while Prime's trailer and wheels are represented as her suitcase and boots respectively.

:''Bishoujo Series'' Optimus Prime also comes with an alternate [[Mouthplate|masked]] headpiece, and a red display base designed after the Autobot insignia. A Deluxe Edition release also included a B5-sized acrylic board for display, featuring Yamashita's original artwork of the character.

:This statue was later recolored and retooled to create ''Bishoujo Series'' [[Nemesis Prime (G1)#Kotobukiya Bishoujo Series|Nemesis Prime]].
{{-}}
===Frame Arms Girl===
[[File:Kotobukiya-TF-Optimus-Prime-Fumikada-Shimane-Ver-kit.jpg|thumb|upright=1.66|Minerva's <s>Ginrai</s> Optimus Prime cosplay.]]
*'''Convoy/Optimus Prime Humikane{{sic}} Shimada Ver.''' (June 2025)
**''Accessories'': 5 pairs of hand parts, 2x2 Faceplates (Android, Human), Front hair/helmet parts for human face config, Ion Blaster, Energon Axe
**''Known designers:'' [[Fumikane Shimada]] (artist)

:Designed by Humikane (actually "Fumikane") Shimada of ''Frame Arm Girls'' and ''30 Minutes Sisters'' fame, this 135mm articulated ''FA Girl'' model kit (though technically not referred to as such on the box, she is listed as part of the ''FA Girl'' product line on Kotobukiya's website) of Optimus Prime/Convoy is another personified take of the character compared to the ''Bishoujo Series'' statue above. Aside from her hand parts and the two signature weapons, Optimus also comes with two types of faceplates, with two expressions for each, and a few front hair/helmet parts for each configuration. The rear truck wheels on her legs can be flipped down to form a pair of support skates.
{{--}}

==Micro Machines==
[[File:MMMPrime&Tracks.jpg|upright=1.66|thumb]]
*'''Optimus Prime Hauler Playset''' (2022)
**''Accessories'': [[Tracks (G1)/toys#Micro Machines|Tracks]] vehicle, decoder
{{charstubtoys}}

==XM Studios==
*'''Optimus Prime''' (2022)

:This hand-painted porcelain statue of Optimus Prime stands over 26" tall and features alternate arms to allow owners to display him in different poses or switching out his signature laser rifle for his energon axe. His chest-mounted Matrix of Leadership lights up, and the set also includes a sculpted version of the truck mode to display next to the robot. Suggested retail was about $1,700.

*'''Optimus Prime Bust''' (2023)

:A four-foot-tall bust of Optimus Prime, with hand-burnished metallic features and a $4,000 price tag.
{{-}}

==''Transformers × Mini World''==
[[File:MiniWorldOptimus.jpg|thumb|upright=1.66]]
*'''Optimus Prime''' (2023)
**''Accessories'': Transforming base, gun, axe, 2 smokestacks, machine part, crane arm, 2 connectors

:''[[Transformers × Mini World]]'' Optimus Prime is a tie-in to the popular [[China|Chinese]] game ''[[Mini World]]''. It comes with a display base which can fold up into a cube-shaped representation of Prime's truck mode, complete with rolling wheels. The figure can transform into a storage mode and store fully inside the cube, or you can remove his head and replace it with the folded up cube. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and axe accessories. The set includes two smokestacks that can be pegged onto the truck-cube mode.

:Each set includes [[Build a Figure]]-like machinery components which can be combined with parts from other sets to make new structures.

:It is exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.
{{-}}

==Mochibots Transformers Plush==
[[File:MochibotsPrime.jpg|upright=1.3|thumb|It was either this or a banana to show how tall I am. And I'm ''NOT'' Primal!]]
<ul class="iconlist">{{Bp-a1|'''Mochibots "Transformers" Plush Convoy''' (2023)}}</ul>
:Apart of the line of cute, cuddly Transformers Plushies, [[Mochibots Transformers Plush|Mochibots]] Convoy (otherwise known as ''Optimus Prime'') is a 5.5 CM tall variation of the character, with Sunbow cartoon-accurate white pants and all! This Convoy is given a "Fumo" stylization, making the robotic detailing more rounded and soft, with stubby limbs and a cute, somewhat stern expression. Every detail is sewn-in, leading to him and the rest of the Mochibots line having a premium feel, with added texture and depth added to each detail. In addition to all this cute Convoy's offerings, he has a block of stuffed material in the back to represent his "Backpack", and a stitched-on Autobot logo! Though, much like [[Cliffjumper (G1)/toys#Mochibots Transformers Plush|Cliff]], the Autobot logo seems to have a squinting expression, likely a limitation of how far the detail can go with this process. Like many other Mochibots, Convoy also features a special, reflective material in his eyes and windows, with light giving it a special shimmer effect whenever it hits it.

:Convoy was released in the Summer of 2023 in "Volume 1" of the Mochibots line, alongside Cliff, Bumble, and Convoy's Shattered Glass counterpart. This line was exclusive to China and Japan, with almost all of them being locked to Asia via [[amiami|amiami's]] digital storefront.

{{-}}

==Fools Paradise==
{{anchor|LOWFOOL}}[[File:LOWFOOL League of Steel Optimus Prime.jpeg|upright=1.66|thumb|Some contrast to the bishoujo, huh?]]
*'''Optimus Prime''' (2023)
**''Accessories'': Football

:Part of a collaboration between Hasbro and [[Hong Kong]]-based online store ZCWO, Optimus Prime joins the "League of Steel" subline of [[Fools Paradise]]'s LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues of [[Neon Genesis Evangelion|Evangelion]]s and {{w|Gundam}}s. He is depicted as a human man wearing heavily Optimus Prime-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache (not, as you might surmise, as a reference to [[Peter Cullen]]'s own face fuzz).

:Preorders for Prime opened in June 2023, with a projected release date of November.

{{-}}

{{anchor|ZCWO}}[[File:Fools Paradise Optimus Prime statue.jpeg|upright=1.3|thumb]]
*'''Optimus Prime''' (2024)

:A second statue of Optimus Prime by Fools Paradise portrays Optimus Prime in a much more conventional (if heavily stylised) design. This vinyl statue of Prime stands approximately 60cm tall, and features light up LED eyes and apparently boasts a full range of articulation. It also features a somewhat weathered paint job.

:Preorders opened in November 2023, with a projected release date of March 2024.
{{comingsoontoy}}

{{-}}

==McFarlane Toys==
{{anchor|PagePunch}}[[File:Page Punchers Optimus Prime and Megatron.jpeg|upright=1.66|thumb|If you squint, you can just ''barely'' make out the lack of a waist swivel.]]
*'''Optimus Prime and Megatron''' (2024)
: ''[[Page Punchers]]'' Optimus Prime is 3-inch non-transformable action figure based off his [[IDW Publishing|IDW]] design.

: He comes in a two-pack with [[Megatron (G1)/merchandise#PAGEPUNCH|Megatron]], packaged with [[New Cybertron Part 1: To Walk Among the Chosen|''Optimus Prime'' #1]] and [[Dissolution Part 6: This Machine Kills Fascists|''Lost Light'' #6]].

{{-}}

==''Hot Wheels''==
{{picsneeded}}
{{anchor|HWTrackFleet}}
[[File:Hot Wheels Track Fleet Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1| '''Optimus Prime''' (Track Fleet, 2024)}}</ul>
:*''Accessories'': Trailer (detachable)
{{toydesigner|[[Charlie Angulo]] ([[Mattel]])}}
:''[[Hot Wheels (franchise)|Hot Wheels]]'' Track Fleet Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Unlike the concurrently released [[Bumblebee (G1)/merchandise#HWScreenTime|''HW Screen Time'' Bumblebee]], Optimus does ''not'' have a sculpted robot face on his undercarriage.

{{-}}{{anchor|HWSkate}}
[[File:Hot Wheels Skate Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Skate, 2024)}}</ul>
:*''Accessories'': Finger sneakers
:Part of the ''Hot Wheels Skate'' subset, this is an Optimus Prime-themed finger skateboard that comes with a pair of red finger sneakers. The shape and packaging use Dreamwave-era artwork of Optimus Prime.

{{-}}{{anchor|HWScreenTime}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (HW Screen Time, 2025)}}</ul>
:*''Mainline ID number:'' 104/250
:*''HW Screen Time ID number:'' 6/10
{{toydesigner|[[Manson Cheung]] and Leeway Chang ([[Mattel]])}}
:''Hot Wheels'' HW Screen Time Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Compared to the ''Track Fleet'' version, this version of Optimus ''has'' a sculpted robot face on his undercarriage, is larger and does not feature a trailer. It is largely based on the transforming ''Mattel Creations'' version of Optimus but with some modifications for cost reasons.

{{--}}

==''Beyblade X''==
[[File:Beyblade_X_Transformers_OptimusPrime.jpg|thumb|Not pictured: Optimus Prime using this to part the Red Sea.]]
*'''Optimus Prime and Megatron Multipack Set''' (2024)

:'''Optimus Prime 4-60P''' was available in a two-pack with [[Megatron (G1)/merchandise#Beyblade X|Megatron 4-80B]], which was exclusive to Amazon in Hasbro territories, and exclusive B4-sponsored stores in Takara-Tomy territories. It consists of three pieces that can be interchanged with those of [[Beyblade#BEYBLADE X|other ''Beyblade X'' tops]]; an attacking "Blade" primarily made of metal, a "Ratchet" that locks parts together and determines height, and a "Bit" that touches the ground and determines movement.

:The "Optimus Prime" Blade features evergreen art of Optimus Prime on its central Gear Chip and is partial of the mainline ''Beyblade X'' Blade "Helm Knight". The Ratchet (4-60) and Bit (Point) are recolored parts from other ''Beyblade X'' tops.

:In Hasbro territories, a QR Code sticker hidden underneath the Blade can be scanned into the ''Beyblade X'' companion app. In Takara-Tomy territories, the QR Code stickers are omitted in favor of a Beycode Card packed with the instructions. However, scanning any of these QR codes only awards the player with in-app points, and will not unlock the Beyblade for in-game use like it would for any mainline ''Beyblade X'' tops.

{{-}}

==Yolopark==
===AMK===
{{anchor|AMKPro}}
[[File:YoloparkAMKProG1OptimusPrime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released as part of Yolopark's AMK Pro line, Optimus Prime comes in pre-assembled modules as opposed to traditional model kit runners. This allows him to be assembled quickly and easily without tools. Unlike Yolopark's regular AMK line, the AMK Pro line features diecast parts as well as light-up features. In Prime's case, his eyes will light up when tapping his head with a magnet. The feature requires one CR927 battery which is not included.

:The fully assembled figure resembles the ''Masterpiece'' Convoy 3.0 and features an opening Matrix chamber and fully articulated hands, eliminating the need for alternate hands. Both the ion blaster and Megatron gun can be wielded by his hands, though removing the stalk from the Megatron gun makes this much easier.

:The figure was redecoed into Nemesis Prime.

{{-}}
{{anchor|AMKHasbroEdition}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Hasbro Edition, 2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Stand with Teletraan-1 Backdrop

:The AMK Pro Optimus Prime kit is re-released under the "Hasbro Edition" branding. In this release, the die-cast parts have been replaced with plastic, and the light-up feature and the Megatron gun accessory are no longer included. In addition, Prime's display stand also comes with an additional Teletraan-1 backdrop for the arm unit.

{{-}}
{{anchor|AMKComboSet}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-and-Megatron-Combo-Set-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Megatron and Optimus Prime Combo Set''' (2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Energy Mace, Light Sword, Laser Pistol, Two display stands (Teletraan-1 Backdrop, Ark Backdrop)

:The "Hasbro Edition" of the AMK Pro Optimus Prime kit is also sold as a two-pack with the same line's Megatron. The 2-pack also comes with a unique pin.

{{-}}{{anchor|AMKClear}}
[[File:Yolopark-TF-Cybertron-Con-2024-AMK-Pro-Optimus-Prime-Clear.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Clear Color)''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released exclusively for the Cybertron Con 2024 in Shanghai (and later in the Yolopark online store), this Optimus Prime is a translucent redeco of the AMK Pro kit.

{{-}}{{anchor|2025AMK}}
[[File:Yolopark-TF-AMK-Optimus-Prime-(2025).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK, 2025)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Matrix of Leadership]]

:This AMK Optimus Prime only comes with his Ion Blaster and the Matrix of Leadership. In addition, He also features cartoon-based colors, complete with opaque chest windows. As the original mold's joints were meant to be molded in die-cast or metallic gray plastic, these areas were also molded in the same white plastic.
{{-}}

===AMK Mini Series===
[[File:TF-Yolopark-AMK-Mini-Series-Optimus-Prime.jpg|thumb|upright=1.66|Swap my right arm with Megatron's so I could go to the offensive!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': 2 additional pairs of hands (Splayed, Pointing), [[Ion blaster]]

:The ''AMK Mini Series'' Optimus Prime is a smaller version of the character, featuring swappable hand parts and his usual Ion Blaster.

:Initial images of the kit's hand-painted prototypes showed Prime utilizing a desaturated blue and red. His white parts are slightly darker, while his grill and abs are flat grey, and the chest windows are white. Unlike the prototype, the blue paint on the crotch is missing in the final product.

:Optimus Prime is sold as either an individually marked single, a 2-pack with the same line's Megatron in a single box, or as a blind-box figure. This mold was also used to make [[Nemesis Prime (G1)|Nemesis Prime]] for the blind-box line, and [[Delta Magnus]] for the Agabyss-organized ''[[BotCon]] 2024'' exclusive House of Magnus BotCon VS Set.

{{-}}{{Anchor|AMKMiniIDW2005}}
<ul class="iconlist">{{Bp-a1|'''Orion Pax (IDW)''' (2025)}}</ul>

:This ''AMK Mini Series'' kit is based on Orion Pax's appearance in the 2005 ''IDW'' comics.

{{comingsoontoy}}
{{-}}

===BMK===
[[File:Yolopark-BMK-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Accessories'': [[Ion blaster]]

:The ''BMK'' (Which stands for "Beginner Model Kit") Optimus Prime is a larger version of the ''AMK Mini'', with the design being based on the ''AMK/Pro'' release. As with other ''BMK''s, Optimus features similarly basic articulation, consisting of a ball-jointed head, ball-jointed shoulders, single-axis 90-degree elbows, a rotating waist and lower legs, and slightly swiveling ankles...that's it.

:The kit has an unfortunate packaging quality control issue: the thin head antennas are likely to be bent or even broken off in most packages.
{{-}}

==Blokees==
===Galaxy Version===
{{anchor|Galaxy Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus.jpg|thumb|upright=1.66|Blokees kits are ''truly'' the right of all Sentient Beings.]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot/Decepticon insignias

:Released in the first wave of ''Galaxy Version'' line of blind boxes, [[Blokees]] Optimus Prime is a roughly 4-inch tall, highly-articulated, and non-transforming snap-on model kit of the Autobot leader. He is built on a "Standard Body" skeleton shared with other Blokees figures in the line, but with different body pieces to make them distinct. As advertised in the box, Prime has a pull rate of 1 in every 12 boxes, or three times across four cases.

:Prime comes with a pair of closed and open hands, along with a left hand molded in a pointing position exclusive to this figure. He also comes with his trademark Ion Blaster and Energon axe weapons—the former can be plugged into the closed hands, and the latter can be plugged into either wrist. The barrel of the Ion Blaster is compatible with the blast effects included with Ironhide, Megatron, and Skywarp. He also has a figure stand with either four studs (China release/Chinese logo) or two studs (Global release/English logo) on top, which he can plug into and connect to similar stands. Optimus can also accommodate the jetpack included with Sideswipe, which was released as part of the ''Shining Version'' lineup.

:If one chooses, Prime's inner shoulder parts and elbow joints can be swapped with the red-colored pieces from the same lineup to create a more cartoon-accurate coloration.

:His body parts are redecoed to make ''Galaxy Version'' [[Optimus Prime (SG)#Blokees|Shattered Glass Optimus Prime (IDW)]], [[Ultra Magnus (G1)/merchandise#Blokees|Ultra Magnus (DW)]], and [[Nemesis Prime (G1)#Blokees|Nemesis Prime]].

{{-}}{{anchor|BlokeesMetallic}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot and Decepticon insignias

:The chase figure of ''Galaxy Version'' 01, with a much slimmer pull rate of 1 in every 36 boxes, i.e. once in four cases. Prime is redecoed in a metallic sheen, save for the joint pieces along with more show-accurate deco on the crotch, thighs, back, and shins. He comes with the same accessories as his regular counterpart.

{{-}}
{{anchor|BlokeesPink}}
[[File:Blokees Cybertron Con 2024 Pink OP.jpg|thumb|upright=1.4|Not the kind of [[fandom:gundam:Trans-Am_System|Trans Am]] you'd expect Optimus Prime to turn into.]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Pink)''' (Galaxy Version, 2024)}}</ul>
:*''Accessories:'' Pair of open hands, one pointing left hand, Energon Axe, Ion Blaster, Matrix of Leadership with support stand

:Released exclusively for the Cybertron Con 2024 event, this Optimus Prime kit is sold as a pre-assembled redeco of the first Galaxy/Shining Version kit, featuring opaque and translucent <s>[[energon]]</s> pink livery, and omits the light-up feature. He comes with all weapons and hand accessories from the original Galaxy Version release and the Matrix/support stand from the Shining Version.

:This Optimus Prime is limited to 999 units, with 400...no, 100<ref>{{citesocial|quote=Dear Fans, We sincerely regret to inform you that the on-site sales of the exclusive item - Optimus Prime (Pink) at the 2024 Transformers Cybertron Con have been temporarily canceled. We apologize for any inconvenience this may cause! As of today (December 6), we have sold 100 units, 300 remaining units would be sold through other sales channels, please stay tuned for our further announcements. Thank you for your understanding and support!|link=https://twitter.com/BlokeesOfficial/status/1864925074991780214|name=BLOKEES.OFFICIAL|site=Site Formerly Known as Twitter|year=2024|month=12|day=06}}</ref> sold at the convention, and the rest distributed through online and physical stores across mainland China.

{{-}}{{anchor|GVParallelUniverse}}
[[File:Blokees-TF-Galaxy-Version-06-IDW-Optimus-Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The sixth wave of the ''Galaxy Version'' blind boxes features an Optimus Prime based on his design and coloration from the IDW story [[The Transformers: Stormbringer|''Stormbringer'']]. In addition to the new hand runner introduced in the 4th wave, Optimus comes with his twin cannons and blaster accessory, complete with its blast effect. Like the other ''Galaxy Version'' kits since Wave 5, Optimus features a slightly upgraded suite of standard body parts, notably the sturdier pre-assembled hinge joints and the multi-colored head piece with color-coded eyes.

:As advertised in the box, he has a pull rate of 1 in every 12 boxes.

{{-}}
[[File:Blokees-TF-GV-06-Hidden-Orion-Pax.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The chase figure of ''Galaxy Version'' 06, with 1:36 odds, this Optimus Prime (now called "Orion Pax") kit is a redeco of the kit above, representing the force field-equipped coloration activated by Trailbreaker in "[[Elegant Chaos Part 1: All Our Parlous Yesterdays]]".

{{-}}{{anchor|BlokeesIDWTrans}}
<ul class="iconlist">{{Bp-a1|'''IDW-Optimus Prime (Transparent Edition)''' (2025)}}</ul>
:*''Accessories:'' Pair of open hands, pair of wrist blasters, Ion Blaster

:A translucent redeco of ''GV 06'' Optimus Prime with an iridescent finish, coming pre-assembled in blister packaging. This figure had a run of 999 units, with the first 61 distributed at an event in Chengdu Station, China on June 1, 2025.

{{-}}{{anchor|GV08}}
[[File:Blokees-TF-GV08-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster

:The eighth wave of the ''Galaxy Version'' blind boxes features another new mold of Optimus Prime in a Generation 1-inspired look, but with a new set of outward forearm armor, and he only comes with his Ion Blaster. In addition to the ball-jointed waist from the previous entry, Optimus also features updated articulation, including a slide-down hip joint axis, rotating upper thigh joints, and improved double-jointed knee articulation, similar to his wave mates. This Optimus can also accommodate Sideswipe's backpack from the ''Shining Version'' line.

:Because the newly designed knee joints are made to fit the narrow gaps in the thighs and lower legs, they are incompatible with joints from previous releases, including those used for the elbows.

:If one chooses, Optimus' forearm armors can be omitted for greater accuracy.

:Along with the rest of the wavemates, Optimus is first revealed at Blokees' booth at the IBTE 2025 (Indonesia International Baby Products & Toys Expo) event.

{{-}}{{anchor|GV08Hidden}}
[[File:Blokees-TF-GV08-Optimus-Prime-Hidden.jpg|thumb|250px|Thanks for helping me... pull myself together...''I guess.'']]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hidden Style)''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, half-dead chest plate, metal splinter

:The chase figure of ''Galaxy Version'' 08, with the standard chase odds of 1 in every 36 boxes, this kit of Optimus Prime is a redeco of the regular kit above in metallic paint and molded plastic, featuring a "half-alive, half-dead" appearance. In addition to his identical accessories, Prime features an alternate front chest block with a gash that is compatible with the included metal splinter (referred to as an "Energon Axe"...okay.).

{{-}}
<ul class="iconlist">{{Bp-a1|'''Metroplex''' (Galaxy Version, 2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''

:The ''Galaxy Version'' Metroplex kit comes with a non-poseable figurine (and obviously out of scale) of Optimus Prime, and he can be pegged onto one of his open-palm hands. As he was molded from merely dark gray plastic, he can be painted in full color (or onto any of the other characters that share his appearance) if you wish.

{{-}}

===Shining Version===
{{Anchor|Shining Version}}
[[File:Blokees-TF-Shining-Version-01-Shining-Roll-Out-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 01 - Shining Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (weapon-holding, splayed), ion blaster, Energon Axe, Matrix of Leadership with support stand, holdable Autobot and Decepticon insignias

:Released in the first wave of Blokees' ''Shining Version'' line, this version of the ''Galaxy Version'' Optimus kit now features painted translucent face and chest parts, and a torso frame that lights up upon shaking (or at least just lightly tap some areas on the torso), causing the eyes and the Matrix pattern tampographed on his chest window to glow for a limited time. In addition to his identical accessories from the Galaxy Version release, Optimus also comes with a single Energon Cube, a separate Matrix with a support stand, and a new, larger figure stand.

:The Matrix features a pair of tabs on each handle, compatible with most ''Galaxy/Shining Version'' kits that include open-palm hands, not just Prime.
{{-}}{{anchor|BlokeesG1Toy}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:The second wave of the ''Shining Version'' series introduced a second Optimus Prime mold styled after his [[Optimus Prime (G1)/toys#The Transformers|original Generation 1 toy]], complete with an ion blaster modeled after it. As with the first ''Galaxy Version'' kit, this Optimus can accommodate Sideswipe's backpack from the ''Shining Version'' line.

{{-}}{{anchor|BlokeesG1ToyMetallic}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (Shining Version, 2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:This chase variant of the above toy-style mold is, like the ''Galaxy Version'', redecoed into metallic colors along with more toy-accurate tampographs and retains the same accessories. The eye and window pieces are now molded with orange-ish red translucent plastic instead of blue.

{{-}}{{anchor|ShiningPax}}
[[File:Blokees-TF-Shining-Version-03-Orion-Pax.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' ([[2025]])}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' 2 pairs of hands (fists/accessory-holding, splayed open-palm), Gun, figure stand

:The third wave of the ''Shining Version'' series introduced a new mold styled after his Orion Pax appearance in ''IDW Publishing'''s "Spotlight Orion Pax" comic. As with later Galaxy Version kits since Wave 5, Orion features sturdier pre-assembled hinge joints.

:Since Orion's chin is slightly too long, fully inserting the ball joint may cause his head to ''slightly'' look upwards. To prevent this, insert the ball joint into Orion's head socket first, and then attach it to the torso frame's peg hole until you feel the friction between the joint and the hole without fully inserting it.

:If you're a speed builder, be mindful when attaching the pre-assembled joints; Unlike the symmetrical joints from earlier waves, the pegs on both ends of these joints are designed to connect to specific pieces; The tabs with slightly smaller holes are intended for the upper arms and thighs, while the regular tabs are meant for the forearms and lower legs. While an incorrect knee joint assembly may cause it to very slightly lean when standing straight or in an A-stance, an incorrect elbow assembly won't be noticeably affected unless you're looking very closely.

{{-}}

===Box Sets===
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Exclusive-Yearly-Version).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon''' (2024)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, Energon Axe, Matrix of Leadership with support stand, figure stand, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:This special edition box set included [[Electrum]]-inspired gold redecoes of ''Shining Version'' (See above) Optimus Prime as well as [[Prowl (G1)/toys#Exclusive Yearly Version|Prowl]], [[Ironhide (G1)/toys#Exclusive Yearly Version|Ironhide]], [[Long Haul (G1)/toys#Exclusive Yearly Version|Long Haul]], and [[Starscream (G1)/merchandise#Exclusive Yearly Version|Starscream]], where they also receive translucent redecoes of face and chest parts painted on.

:As with the rest of his pack-in mates in this set, Optimus suffers from a case of [[Gold Plastic Syndrome]], as his molded gold hinge joints can potentially snap off due to the swirly plastic.

{{-}}
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Yearly-Version-Set-2-Optimus-Prime-(G1-Toy).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon - Defence''' (2025)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, figure stand, blast effect, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:The 2025 Yearly Version box set now features an Electrum-inspired redeco of the toy-based ''Shining Version'' Optimus Prime kit. In addition to the identical accessories, he also comes with two additional impact effects for the figure stand.

:Like the rest of this box set's kits, Optimus' hinge joints are now molded in a more mustard yellow-ish plastic, reducing the Gold Plastic Syndrome-related issue plagued from the previous release.

{{-}}

===Action Edition===
[[File:Blokees-TF-Action-Edition-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Action Edition, 2024)}}</ul>
:*Accessories: Ion Blaster, Energon-Axe, Jetpack, Wrist Communicator, Holomatter avatar, Matrix of Leadership, Index finger parts (Fist, Pointing, Trigger-finger), display stand with magnet-powered faction symbol block

:The "Action Edition" Optimus Prime is a 7-inch (approx 18cm) model kit with a slightly more complex build and features an inner frame (equivalent to the ones used for ''Bandai'''s "Master/Perfect/Real Grade" kits) with greater articulation points than his other ''Galaxy Version'' toys. In addition to his two signature weapons, the removable Matrix of Leadership, and the jetpack, Optimus also comes with a hologram readout and wrist comm pieces to attach to the left forearm, with each of those parts featuring two different types of stickers. The articulated hands also feature two additional index fingers, a straight pointing piece, and a slightly curved piece for the Ion Blaster's trigger. A magnetic component in his display stand's faction symbol activates the light-up features that illuminate his eyes and the Matrix. An additional sticker sheet and extra yellow-colored eye parts can be used to create a toy-accurate version of this kit.

:If one chooses, the middle-to-pinky fingers ''can'' be (carefully) sliced into individual pieces as they also feature individual ball joints for each finger.

{{-}}

===Defender Version===
{{Note|Every case before the 5th wave comes with a random Commemorative Card, with 10 Common, 1 Gold, and 1 Silver for each out of every 12 cards.}}
{{anchor|DefenderTruck}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-truck.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Vehicle''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''

:Released as part of the first ''Defender Version'' line of blind boxes, this ''Blokees'' kit of Optimus Prime is molded in his truck mode. The trailer hitch also comes with the Auto-Launcher from the Combat Deck, where it can be extended and wielded by other figures from the same line, allowing them to ride Optimus like an adorable little scooter. The Auto-Launcher can be detached from the bar, allowing the figure to be displayed as a regular-looking truck.

:The Combat Deck/Trailer and the Roller from the 5th wave can accommodate this kit, with the Auto-Launcher able to be mounted inside the trailer.

:This mold was also used to make [[Optimus_Prime_(SG)#SGDefenderVehicle|his Shattered Glass counterpart]].

{{-}}{{anchor|DefenderRobot}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-robot.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:This ''Defender Version'' kit of Optimus Prime is a 2.2-inch (5.5cm) figure, a few inches smaller than the ''Galaxy Version'' kits, but still articulated. Unlike his ''Galaxy Version'' kit, Optimus only comes with an Ion Blaster.

:Like most of the larger Galaxy Version kits, Optimus features a simple neck joint that is colored to match his optics, allowing it to be see-through from his head's eye holes. This mold was also used to make [[Ultra_Magnus_(G1)/merchandise#Defender_Version|Ultra Magnus]] and [[Optimus_Prime_(SG)#Defender_Version|Prime's Shattered Glass counterpart]].

{{-}}{{Anchor|SpecialGalaxyType}}
[[File:Blokees-TF-Defender-Ver-01-Special-Galaxy-Type-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Special Galaxy Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:One of the four chase figures of the line, the "Special Galaxy Type" Optimus Prime is a metallic redeco of the figure above, and he also features additional details to make him more accurate to the show. One chase variant is guaranteed per case, meaning this Optimus appears in five out of every twelve cases.

{{-}}{{Anchor|SpecialArmorType}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-100%-Firepower.jpg|thumb|250px|All of these armaments and yet he insists on crippling the 'Cons' joints without destroying them.]]
<ul class="iconlist">{{Bp-a1|'''Special Armor Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster, Forearm cannon, Wing pack

:The "Special Armor Type" version of the Optimus Prime kit is an alternate version of the Special Galaxy Type chase figure, decked out in metallic paint, and comes with additional armaments such as the forearm cannon and a wing pack that is based on the one used by his ''Cybertron'' namesake. Unlike the chase variant above, this Optimus has an '''''even''''' slimmer pull rate of '''1''' in every 144 boxes, or once per twelve cases.

{{-}}{{anchor|DV05Brilliant}}
[[File:Blokees-TF-DV05-SG-Brilliant-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Brilliant Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 05 - Traitor to Tyranny'''
:*''Accessories'': Energon Axe

:The fifth wave for the Defender Version kit comes with a translucent redeco of Optimus Prime, whose Ion Blaster is replaced with an Energon Axe. Additionally, he comes with one of the three random plastic commemorative coins (featuring etchings of Jetfire's head, Galvatron's head, and Jetfire's vehicle mode) in every case that contains the kit. Each coin is molded from translucent plastic and features a gradient pattern painted with gold.

:As with other clear-colored Brilliant/Glittering kits, the translucent plastic-molded ball-and-socket joints tend to be somewhat loose even when it's built out of the box, compared to the opaque and metallic kits.

{{-}}
===Blokees Wheels===
{{Note| Due to licensing-related reasons, this blind-box line was not released in the US market.}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''

:This 1/64-scale vehicle kit of Optimus Prime's truck mode is part of the new ''Blokees Wheels'' series of blind-boxed ''Transformers'' products. The design is based on Don Figueroa's interpretation of the character's Cybertronian truck mode, as seen in IDW's 2009 -2011 ongoing series. While everything else is molded in ABS plastic, the primary vehicle shell is made out of painted die-cast. Additionally, Optimus Prime features a universal Chassis Connector, which is used by all vehicle mode kits in the lineup, and the vehicle shell is capable of being opened for the chase kits' driver figures to interact with.

:This Optimus Prime has a pull rate of 1/24.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hologram Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with a slim pull rate of 5/144, the "Hologram Edition" Optimus Prime is a translucent redeco of the kit above. It includes an additional translucent blue driver minifigure, which is also designed to fit in the other vehicle kits.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Titanium Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with the slimmest pull rate of 1/144, the "Titanium Edition" Optimus Prime is a metallic redeco of the original kit, and he comes with the same driver figure from the Hologram Edition release of the kit.

{{--}}

==Combot==
[[File:Unix-Square-Combot-Optimus-Prime.jpg|thumb|300px|Autobots, Transf-I mean, Partsform and roll out!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories:'' 5 pairs of hands, Ion Blaster, Energon Axe, Energon Sword/Blaster Bayonet, Vehicle mode frame

:Produced by [[Unix Square]], a toy company based in Hong Kong, [[Combot]] Optimus Prime is an action figure approximately the size of a Voyager Class figure, and he features an impressive 50 points of articulation and includes a hefty amount of die-cast metal for a weighty premium feel, and light-up features for both the eyes and the Matrix of Leadership. In addition to his iconic Ion Blaster, Optimus also comes with a handheld Energon Axe and a live-action movie-inspired Energon Sword. The sword can also combine with the Ion Blaster to create a Bayonet.

:As the LED unit is wired on the neck, Optimus's head cannot swivel in a full 360 degrees.

:Unlike most non-Hasbro/Takara merchandise of the character on this page, Combot Optimus Prime can transform—albeit loosely defined due to licensing restrictions—into a stylized cab-over using full partsforming, while requiring the included vehicle mode frame.

{{-}}

==Auldey==
{{Note|All releases come with their respective trading cards.}}
[[File:Auldey-TF-AAE-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-001'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Optimus Prime is a 5-inch non-transforming but highly articulated action figure, and he comes with his additional pairs of hands and his signature ion blaster. Prime also features a removable chest window piece, which reveals an empty cavity for a future Matrix of Leadership accessory.

:As advertised in the box, the lineup had an 11/70 probability of getting Prime. This mold was also used to make [[Nemesis Prime (G1)#Auldey|Nemesis Prime]].

{{-}}{{anchor|auldeymetallic}}
[[File:Auldey-TF-AAE-Optimus-Prime-(Metallic).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Metallic Color)''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-000'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:The chase figure of the first lineup with a much slimmer 1/72 probability, this Optimus Prime is a redeco and retool of the figure above, featuring a toy-based deco and parts such as the head and legs. In addition, Prime also comes with a sheet of customer-applied stickers to complete the rest of his toy-accurate details, which include the chrome yellow-gold areas on his front hip.

{{-}}{{anchor|auldeyoptimal}}
[[File:Auldey-TF-AAE-Select-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Optimal Set''' (Alpha Action Elite Select, 2025)}}</ul>
:*''ID Number'': '''AAE-S 001'''
:*''Accessories:'' 16 pairs of hands, Ion Blaster, Energon Axe, Matrix of Leadership, Jet pack (with Blast effects), 2 pairs of alternate communication panels, display stand
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of Auldey's non-blindboxed "''Alpha Action Elite Select (AAE-S)''", a subline that also features re-releases of previous figures with more accessories and premium details, ''AAE-S'' Optimus Prime is a redeco and retool of the original AAE blindboxed figure. Deco-wise, Optimus features metallic paint on the red and blue plastic, along with some metallic silver details. He also comes with additional accessories, such as the Energon Axe, Megatron's pistol form, a jetpack with two Blast effects (also compatible with the Ion Blaster), an additional pair of interchangeable communication panels, and four extra pairs of hands that need trimming from their runners. Additionally, Optimus includes retooled areas and newly molded parts, such as a new neck joint that allows him to look up further, an opening chest window that grants access to his Matrix Chamber, and a display stand with an adjustable posing arm that plugs into multiple holes on his back and the soles of his feet for midair action poses.

:Optimus is also compatible with the Seeker-based back and the head from the same entry's Starscream, recreating the latter's disguise in [[Megatron's Master Plan, Part 1]].

{{--}}

==Ty==
* '''Beanie Bouncer Optimus Prime ''' (2025)
[[File:Bouncer-op.jpg|thumb|200px|If we want to get technical, this is actually [[Diac]].]]

:A bouncing ball covered in fur produced by Ty, creator of the more famous Beanie Babies and Beanie Boos. Optimus Prime's head crests are represented by additoinal pieces of felt material coming out of the ball. Opposite the face is an autobot symbol.

:Opitmus Prime is also available in a three set alongside Megatron and Bumblebee.

{{--}}

==Spin Master==
* '''4D Build Innovation Series Optimus Prime''' (2025)
[[File:Op-spin-master-4d.jpg|thumb|200px]]

:A puzzle made of cardboard, with LED Lights, from the 4d Build Innovation Series. Optimus is depicted holding his ion blaster and staring off into the distance. The kit contains both Optimus's robot mode and alt mode. It was initially spotted in [[Costco]] stores in Fall of 2025.

{{--}}

==References==
{{reflist}}
{{-}}
[[Category:Attacktix]]
[[Category:Combiners]]
[[Category:Decoys]]
[[Category:Generation 1 Autobots]]
[[Category:MyClone]]
[[Category:Robot Heroes]]
[[Category:Titanium Series]]
[[Category:Bitfig]]
[[Category:ULTIMATES!]]
[[Category:Transformers Character Card Autobots]]

Optimus Prime (G1)/merchandise

2025-10-30T00:26:21Z

Leia G: added a 4d build puzzle by spin master. I used the full SEO title, as that's what's on the official website, but will change it to the shorter one used by retailers if asked.

{{suite}}

'''Optimus Prime''' is a bit of a shill.
==Stamp Bot==
[[File:OptimusPrime-StampBot-1984.JPG|thumb|Truck stamp is cool!]]
*'''Optimus Prime''' (1984)
:Made by [[HG Toys]], Stamp Bot Optimus Prime is a small, non-poseable figurine of Optimus Prime based on his toy with a rubber stamp on the base, and a cap with a felt "floor" that was soaked in ink. The stamp made an image of Optimus Prime's cab mode.
{{-}}

==The Transformers Cookie Jar==
*'''The Transformers Cookie Jar''' (1984?)
:A ceramic cookie jar in the likeness of Optimus Prime's head. The top of Prime's head lifts off for the storage of delicious baked goods or Energon or what-have-you. The cookie jar was manufactured by [[Great American Housewares]] under license from [[Hasbro]].
::*''[http://www.tfw2005.com/boards/transformers-toy-discussion/179468-optimus-prime-cookie-jar-price-check.html Images of The Transformers Cookie Jar at TFW2005]''
{{-}}

==Collegeville Costumes==
{{anchor|CollegevilleG1}}
*'''Optimus Prime''' (1984)
:Although [[Collegeville Costumes]] only released a small number of Transformers [[Halloween]] costumes, and made some odd choices for characters to depict in the process, Optimus Prime was an obvious choice as one of their first releases. The costume consists of a thin plastic facemask based directly on the Optimus toy's head complete with yellow eyes, and an orange and yellow plastic smock decorated not with the details of Optimus' body, but with his package art and the Transformers logo.

*'''Optimus Prime''' (1993)
{{anchor|CollegevilleG2}}
:Optimus Prime recieved a second costume from Collegeville for their line of ''[[Transformers: Generation 2 (franchise)|Transformers: Generation 2]]'' line. As with the 1984 Collegeville costume, it consists of a thin plastic mask held on by elastic. Unlike the previous costume, the plastic smock is now decorated with the details of Optimus' G2 body, as well as having his name and the G2 logo on it.
{{-}}

==Vehicle Play Tent==
[[File:Vehicleplaytent.jpg|thumb|Both a big truck ''and'' a series of tubes.]]
*'''ERO''' (1984?)
:The Vehicle Play Tent was part of the deluge of Transformers merchandise in the 80s. The tent was constructed by means of a series of plastic tubes that fit into sockets on corner pieces (similar to the "k'nex" building system that arrived a few years later), then a vinyl cover was slipped over this PVC skeleton to make the tent.
{{-}}

==Oral Care Station==
*'''Optimus Prime Oral Care Station''' (1984/85?)
:An electric toothbrush in the likeness of Optimus Prime. A battery-operated feature causes the toothbrush (attached at Prime's left wrist) to move back and forth. The set also included a cup for [[water]], an extra brush head, and a stand to hold the various accoutrements.
::*''[https://www.flickr.com/photos/14985789@N07/3207711517/?rb=1 Image at Flickr.com]
::*''[http://fredsworkshop.com/oral.html Images of the Oral Care Station in-box at FredsWorkshop.com]''
{{-}}

==Transformers Milk Caramel==
[[File:Tfcaramel optimus prime.jpg|thumb|upright=1.66|Note: Do not eat! ... the candy. The toys taste better.]]
*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A small soft-rubber figurine (known as a ''keshigomu'' in Japan) of Optimus Prime was released as part of [[Kabaya]]'s line of ''[[Transformers Milk Caramel]]'' [[candy toy]]s. Like all the figures from the 1985 range, Prime came blindpacked, and was available in a variety of colors including white, blue, yellow, green and orange. As the name of the series suggests, he came with a piece of caramel candy.

*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A second Optimus Prime ''keshigomu'' was included in the second wave of ''Milk Caramel'' figures, sporting some broader proportions and more toy-based design cues like visible wheels, holding its gun in its left hand, rather than its right. This figure was available in red, yellow and blue variations; a baffling variant is known to exist with a ''Decepticon'' symbol on its left shoulder!

*'''Convoy''' (1985)
**''ID number:'' '''2'''
:The second ''Milk Caramel'' wave also contained a third Optimus Prime figure, largely identical to the second, except with its gun in its right hand, and holding its left arm aloft. Again, this figure was available in red, yellow and blue variations.
{{-}}

==Transformers Choco==
[[File:Tfchoco optimusprime.jpg|thumb]]
*'''Convoy''' (1985)
:A small solid-color snap-together model kit of Optimus Prime was released by Kabaya as part of their ''[[Transformers Choco]]'' line, coming packaged with small chocolate candies similar to [[M&M's]] called "Chocolate Dots". The kit can transform from robot to vehicle mode, though this version of Prime doesn't have any hands.

*'''Convoy''' (1985)
**''Accessories:'' Two fists
:A second ''Choco'' version of Prime was upsized from the first a little, and was given a pair of removable fists, the right one clutching Prime's [[ion blaster]].
{{-}}

==Transformers Gum==
[[File:Tfgum optimusprime.jpg|thumb|upright=1.66]]
*'''Convoy''' (1985, 1997)
**''Accessories:'' Two fists, ion blaster
:In addition to the small ''Choco'' model kit, Kabaya also released a larger version of Prime under their ''[[Transformers Gum]]'' line. Essentially a downsized version of the original Prime toy (sans trailer), the kit is sculpted from black, red, and grey plastic, features stickers rather than paint applications for details, and came with a stick of gum.

:This kit was reissued in 1997 by might-or-might-not-be official Transformers licensee [[ToonTown]] in [[South Korea]] (possibly, in a 2-pack with a reissue of ''Transformers Gum'' [[Soundwave (G1)/merchandise#Transformers Gum|Soundwave]] <ref>[http://fuwakudou.web.fc2.com/prisoners06.html One source] mentions obtaining two boxes of the ToonTown ''Transformers Gum'' releases with each containing two kits - the one numbered #1 featuring Optimus Prime and Soundwave and the one numbered #2 featuring Sideswipe and Starscream - but considering that none of the other (albeit admittedly very few) sources that discuss these kits mention a similar arrangement, it is possible that this was either a packing mistake or simply already-opened boxes being sold on the secondary market with two loose kits stuffed into them (the article does not specify whether or not the boxes they obtained were sealed, although they do look new-ish in the provided pictures). Still, considering how very little information exists regarding these releases in general, it will nonetheless be noted here that these kits ''might'' have been released as 2-packs at some point.</ref>), looking mostly identical save for a set of cheaper-looking paper decals.
{{-}}

[[File:Tfgum2010 g1prime.jpg|thumb|upright=1.66|My limbs need to be horribly mutilated and rearranged to change forms!]]
*'''Convoy''' (2010)
**''Accessories:'' Ion blaster
:The first wave of 2010's revival of the ''Transformers Gum'' series served up a double dose of Prime, beginning with this new model kit of the original Generation 1 version of the character. Sculpted from white, red, and blue plastic, the kit features a positively ''ungodly'' amount of stickers to make it look presentable and comes with Prime's traditional ion blaster weapon, which stores on the rear of his cab in vehicle mode.

:In terms of transformation, Convoy partially [[partformer|partforms]], as the forearms are needed to be removed and attach it back during conversion.
{{-}}

[[File:Tfgum2010 henkei prime.jpg|thumb|upright=1.66|So do mine!]]
*'''Convoy''' (2010)
**''Accessories:'' Smokestacks/laser cannon
{{toydesigner|[[Naoto Tsushima]] (packaging artist)}}

:The second Prime figure in the 2010 ''Gum'' line was this kit of his ''[[Transformers: Classics|Classics]]''/''[[Henkei! Henkei! Transformers (franchise)|Henkei! Henkei!]]'' body. As with the Generation 1 model, this figure is made from white, red and blue plastic and uses ''lots'' of stickers. It comes with the ''Classics''' figure's transforming smokestack/laser cannon weapon.

:Much like his aforementioned G1 self, his arms also need to be partformed into robot mode.
{{-}}

[[File:Tfgum2014_g1starconvoy.jpg|thumb|upright=1.66|But not mine!]]
*'''Star Convoy''' (2014)
**''Accessories:'' Cannon, Roller/ treads, car mode Hot Rodimus

:Released as part of the 8th wave of Kabaya's 2009 series of standard model kits, Star Convoy is a snap-together model kit that can transform into a futuristic big rig. Like the full-sized Star Convoy toy, this model kit can assume a battle station mode and also includes a diminutive and non-transformable Hot Rodimus in car mode that can interact with the base mode ramps. Like most other Kabaya model kits, Star Convoy has no paint applications and relies on stickers for added details.

:Owing to the original toy's simple engineering, Star Convoy does not require any disassembly to transform into robot mode, making him one of the few non-partforming Kabaya figures. He does, however, need to have his Microcarrier wheel base detached (which was also an option on the original toy) to fully access a significant improvement over his older self: some newly-added leg articulation! The Microcarrier also doubles as a shield that can be attached to the robot's left arm.
{{-}}

==Hero Set==
*'''Convoy''' (1985)
**''ID number:'' '''01'''
**''Accessories:'' Laser rifle
:A large ''keshigomu'' of Optimus Prime was produced by TakaraTomy licensee [[Maruka Toys]]. Packaged on a blister card, the static, unposeable Prime figure came with a removable laser rifle, and featured a few small stickers for colour and detail. Maruka also produced a Megatron figure in the same scale, and both Prime and he were available in red, yellow or green.
{{-}}

==Decoy==
[[File:Decoy optimus prime.jpg|thumb]]
*'''Cybertron Hero Collection 22''' (multi-pack, 1986)
*'''Defeat Trypticon Strategy Game''' (board game, 1986)
:Optimus Prime was among the many characters rendered by [[TakaraTomy|Takara]] as part of their series of 1.5" ''keshigomu'' figurines. Like all the Autobots in the series, Prime was molded in soft red rubber, and featured a number sculpted into his back that was the sum total of his [[Tech Spec]]s, for use in the various games that could be played with the figurines. Prime was available as part of a 22-piece box set of Autobot figures, as a playing piece in the Defeat Trypticon Strategy Game, and later, in a peach coloration randomly packed as part of various other box sets.

*'''Optimus Prime''' (1987)
**''Checklist number:'' '''31'''
:The Prime figurine was later brought over to [[Hasbro]] markets as part of the "[[Decoy (G1)|Decoy]]" promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (31, in Prime's case). Like all Autobot Decoys, he was a randomly-chosen pack-in available with the carded [[Throttlebot]]s, [[Aerialbot (G1)|Aerialbots]], [[Protectobot (G1)|Protectobots]] and [[Technobot (G1)|Technobots]].

::*''[http://www.tfu.info/1986/Autobot/Decoys/OptimusPrime/optimusprime.htm More information on Decoy Optimus Prime at TFU.info]''
{{-}}

==Knitting Pattern==
[[File:Transformers-knitting-pattern.JPG|thumb|Here to transform your sweater into something that will get your ass kicked.]]
*'''Wendy DK 3015''' (1986)
: Produced by U.K. company [[Wendy DK]] and designed by [[Joy Gammon]], this pamphlet contained patterns for two ''Transformers''-themed sweaters, one featuring Optimus Prime in robot mode, one featuring Optimus Prime in vehicle mode. The patterns were sized as Children's Large, so you're going to have to upscale it quite a bit if you want your <s>girlfriend</s> mom to knit you one.
{{-}}

==Vinyl figurine==
[[File:Optimus Prime Vinyl Figure set.jpg|thumb|upright=1.66|Vinyl Prime leads his decoys into battle [[Action Master|before the great storm]].]]
*'''Scramble Gun Set''' (1986)
**''Japanese ID number:'' '''Part.1'''
:Optimus Prime was one of several characters released by [[Seven]] and Takara as large vinyl figurines in a variety of different novelty sets. Prime came packaged with a roleplay pistol (the titular "Scramble Gun"), an Autobot badge, and four randomly assigned peach-colored decoy figures. In [[Ultra Magnus (G1)/merchandise#Vinyl figurine|"Part.2"]] of the set Prime is replaced by a vinyl Ultra Magnus.{{-}}

==Gold Convoy Trophy==
[[File:Gold Convoy Trophy.jpg|thumb|Thou will worship this golden convoy. Or Perish!]]
*'''Optimus Prime''' (trophy, 1988)
:A gold chrome trophy in the likeness of Optimus Prime was given as an award to an unknown number of distinguished [[TakaraTomy|Takara]] employees and as a [[Lucky Draw figure|Lucky Draw]] (alongside the [[Chromedome (G1)|Silver Chromedome Trophy]]) in [[TV Magazine]] in 1988. The two different releases have different plaques but appear to be otherwise identical. If you're an Optimus Prime merchandise completist, good bloody luck finding this one.
{{-}}

==''Generation 2''==
*'''Optimus Prime''' (Dairy Queen promotion, 1994)
[[File:DairyQueen Optimus.jpg|thumb|Rare, in a raw chicken sort of way.]]
:Released in Dairy Queen's 'Kid's Pick-Nic!' meals in 1994, this hunk of red and blue plastic is the first known Optimus Prime kids' meal toy and also probably the worst, sporting no transformation and zero articulation of any sort, with an included sticker sheet for detailing that doesn't particularly resemble any iteration of the character.

:These can be pretty hard to find, owing to their limited distribution compared to the average fast food promotion. Being pretty forgettable as toys probably didn't help either, if we're being honest.
{{-}}

*'''Optimus Prime Inflatable Bop Bag'''
[[File:OptimusPrime_G2_Inflatable_Bop_Bag.jpg|thumb|At last, merchandise for Decepticons!]]
:Released in 1993 by Kid Dimension, a subsidiary of Hasbro,<ref>[http://www.fundinguniverse.com/company-histories/hasbro-inc-history/]</ref> this 3 foot tall Inflatable Bop Bag featured the likeness of Optimus Prime above the Transformers Generation 2 logo. Supposedly to encourage kids to punch out Optimus Prime?
{{-}}

===ToonTown===
{{note|There's a longstanding debate on whether the obscure Korean-exclusive [[ToonTown]] figures and merchandise, allegedly released under official Hasbro licensing according to their packaging, are actually legitimate Transformers products or just bootlegs with fraudulent copyright information. Although there isn't a clear consensus from collectors and no statement from Hasbro on this matter as of {{CURRENTYEAR}}, we have nonetheless chosen to cover them here for the sake of archival and posterity.}}

[[File:Midam-Prime.jpg|thumb|upright=1.66|Maybe a licensed product, maybe a bootleg. Maybe it's in our definition of "toy," maybe it's "merchandise." ToonTown needs a {{w|Eddie Valiant|detective}}!]]
{{anchor|MidamIndustry}}
<ul class="iconlist">{{Bp-a2|'''Optimus Prime''' (Model kit, 1997)}}</ul>
:*''Accessories'': Blaster, left & right fists
: Notoriously odd [[South Korea]]n company ToonTown licensed the ''Transformers'' brand to model kit manufacturer [[ToonTown#Items released by Midam Industry|Midam Industry]], which in turn put out this surprisingly detailed and robust kit of the original Generation 1 Optimus Prime figure. It is fully transformable and about 3/4ths the size of the original toy. He does not feature his trailer, and his weapon design is substantially different from either of his classic blasters.

: Three color morphs have been found so far: original red arms and torso with blue head and legs, a mirrored version with red head and legs and a blue torso and arms, and one with all the aforementioned parts in blue.<ref>Reviews for a [https://m.blog.naver.com/eoiipp/130144214329 "standard"-colored Midam Optimus kit], an [https://blog.naver.com/parang16/20041871808 "inverted"-colored Midam Optimus kit], and an [https://blog.naver.com/nckim/70101680088 all-blue-colored Midam Optimus kit] on blog.naver.com</ref> This suggests that the colors which make up the two batch of parts might be randomized between blue and red, and as such; an as-of-now undocumented all-red version might also exist. All of his versions also have their chrome parts painted in metallic gold, a common oddity across ToonTown Primes as seen in the previous LALA figure.

: The figure comes with a batch of rather weird stickers, with text on his license plate and the sides of his truck mode that refers to him as "[[gbwiki:Dump Robo|Dump Robo]]".
{{-}}

[[File:LALA-PrimePencilCase.jpg|upright=1.66|thumb|Pope Leo XIV might have been selected on the
day that this image was uploaded, but pencil case Optimus might be the holiest thing that I've seen all day, hahaha... I'm going to hell, aren't I?]]
*'''LALA Pencil Case''' (1997)
:Possibly one of the most majestically quirky pieces of merchandise to have graced any Transformers character ever, this incredible pencil case from ToonTown licensee [[ToonTown#Items released by LALA|LALA]] is generally based around the design and transformation of the original Generation 1 Optimus Prime toy, but with ''a lot'' more than meets the eye to it: on top of being fully transformable from his robot mode to (an albeit rather flat) truck mode, he folds open to reveal space for the storage of several pencils and/or pens of your choosing, as well as including printed stickers for a time table and an address book, a drawer for the storage of extra school supplies, and a hidden thermometer that's revealed by lowering his head!

:Pencils can be attached to his shoulders to imitate his smokestacks, and his fists, which are removable for the transformation like in the original toy? They're erasers! Gah, how can an obscure, maybe even potentially fake piece of merchandise from 1990s South Korea have this much soul and creativity put into it! The fists can even be stored below the truck's front portion in vehicle mode, guaranteeing that you never lose them.

:He also includes a sticker sheet and a small 20cm ruler, featuring packaging art of himself plus ''Generation 2'' [[Megatron (G1)|Megatron]], [[Sideswipe (G1)|Sideswipe]], and [[Ramjet (G1)|Ramjet]], as well as pictures of their respective LALA eraser versions (the one for Optimus coming right up).
{{-}}

*'''Eraser''' (1997)
:Another piece of merchandise from ToonTown licensee LALA, this eraser also doubles as a small simple model kit, with his large colored bits being the "eraser" portion and the remainder of the toy being constituted of grey plastic parts that are assembled together. He transforms from robot to vehicle and back by [[Partformer|partforming]] his individual components.

:Although the advertisements and aforementioned ruler (as well as the few copies that we know of) feature his eraser bits in pink, it is possible that he might have also been released in bright green, as other LILA erasers that also show up as pink in promotional images have been found with this color instead.
{{-}}
*'''Watch''' (1997)
:Yet another LALA product, this Optimus Prime watch "transforms" by folding out of its compressed half-form and standing up as a simple fully-fledged little robot. His chest opens to reveal the titular watch. Said chest, along with his head, have an unusual gold chrome deco (a commonality across a handful of ToonTown products), and the box art is painted accordingly to reflect this.
{{-}}

==''Metalforce''==
[[File:MetalforceConvoy.jpg|thumb|I'm expensive! ''(Metallic Version Pictured)'']]
*'''Convoy''' (1999/2000)
**''Japanese ID number:'' '''MFC-01'''
**''Accessories:'' Ion Blaster, Autobot Matrix of Leadership, alternate hand, unpainted rifle, Matrix, helmet and hand

:''Metalforce'' Convoy is a large vinyl figurine produced by [[Time House]] sculpted to very closely resemble Optimus Prime as he appeared in the original television series, and at the time was the most accurate product depiction of Optimus Prime's cartoon appearance.

:The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his [[Matrix of Leadership/toys|Matrix of Leadership]], as is a ''[[The Transformers: The Movie|Movie]]''-style Matrix cover (not pictured). He also comes with an alternate hand that allows him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands, and helmet, which probably meant for those who wanted to duplicate them with resin and/or wish to modify/paint them...you know how garage kit modellers do.

:Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colors of the actual series, and a metallic-paint version (pictured), which is less [[show-accuracy|show-accurate]] but more shiny. The plain-colors version was the first release and have an Autobot symbol tampograph on his shoulder as per [[The Transformers (cartoon)|the cartoon]], while the later metallic-finish version instead came with a decal sheet.

{{-}}

==''Choro-Q''==
*'''Convoy''' (2000)

:''[[Choro-Q]]'' Convoy is a [[redeco]] of the Domra Truck toy from Takara's ''Choro-Q'' toyline of non-transforming [[super deformed]] vehicles. He was an [[exclusive]] at [[BotCon]] Japan 2000, and features a [[pull-back motor]] and a rear license plate that reads "BotCon Japan 2000".

:Along with ''Choro-Q'' [[Mirage (G1)|Ligier]] and [[Megatron (G1)/toys|Megatron]], Convoy was given out randomly to convention attendees. Each toy was limited to 1000 pieces.

==Super Collection Figure==
[[File:SCF Optimus.jpg|upright=1.66|thumb|#IGotPrimeOnIt]]
*'''Convoy''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

: A three-inch tall [[plastic|PVC]] figurine of Optimus Prime was available as part of the first wave of [[TakaraTomy|Takara]]'s ''[[Heroes of Cybertron (toyline)|Super Collection Figure]]'' line. Like all the figures in the wave, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve [[blindpacking|blindpacked]] figures.

{{-}}{{anchor|SCFaxe}}
[[File:SCF Optimus chase axe.jpg|upright=1.66|thumb]]
*'''Convoy with Ax''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

:Also available in the first ''Super Collection Figure'' wave was a rare "Secret Figure" version of Optimus (斧付きコンボイ, ''ono-tsuki konboi''), decorated in metallic paint and replacing his gun-wielding right hand with his [[energon-axe]].

: It was ''presumably'' released at a ratio of one per every ten cases; while this has not been officially confirmed, later waves gave these odds for Secret Figures.

{{-}}{{anchor|SCFtrailer}}
[[File:SCF Optimus Truck.jpg|upright=1.66|thumb|We're just as confused as you are, folks.]]
*'''Convoy (Trailer Mode)''' (2000)
**''Act'': '''2'''

:Part of the second ''Super Collection Figure'' act, this is the only ''SCF'' figure of a vehicle mode Transformer. As with the previous non-chase Prime figure, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve blindpacked figures.

: Unlike every other figure in the line (excluding build-a-figures), this one does ''not'' come with a figure stand, because... well, what would be the point?

{{-}}{{anchor|SCFMegaGun}}
[[File:SCF Optimus chase jetpack.jpg|upright=1.66|thumb]]
*'''Megatron & Convoy''' (2000)
**''Act'': '''2'''
**''Accessories'': Stand

:The second ''Super Collection Figure'' wave, like the first, also had its own Optimus Prime chase figure, this one wielding Megatron in gun mode and wearing [[Sideswipe (G1)|Sideswipe]]'s [[jet pack|rocket pack]], as seen in the [[The Transformers (cartoon)|original ''The Transformers'' cartoon]] episode "[[More than Meets the Eye, Part 3]]".

: This was presumably also released at a ratio of one per every ten cases.

{{-}}{{anchor|SCFdamage}}
[[File:SCF Optimus chase damage.jpg|upright=1.66|thumb]]
*'''Damaged Convoy''' (2001)
**''Act'': '''3'''
**''Accessories'': Stand

:There was no mass-release Optimus Prime figure for the third ''Super Collection Figure'' act, but there was another rare chase figure, this time a battle-damaged version of the original figure from the first act, referencing his injuries from ''[[The Transformers: The Movie]]''.

: Again, it was ''probably'' released in one out of every ten cases. He replaced the clear version of [[Bumblebee (G1)/merchandise#Super Collection Figure|Bumblebee]] in the case.

{{-}}{{anchor|SCFcom}}
[[File:SCF Optimus Comm.jpg|upright=1.66|thumb|He's actually checking his makeup.]]
*'''Convoy (B)''' (2001)
**''Act'': '''4'''
**''Accessories'': Stand

:For the fourth ''Super Collection Figure'' wave, Prime was rendered weaponless, speaking into the open communication panel on his left arm. Like all the figures in the fourth wave, Prime was available in both standard full color and metallic silver "pewter" versions, one of each of which was available in a standard case of twelve blindpacked figures.

: Care should be taken when moving the joints of the pewter version, as is not uncommon for the connector pegs to have gotten painted as well, resulting in stuck limbs and tearing joints. Shaving the interior of the socket slightly with a hobby knife is usually sufficient to relieve the issue. (This holds true for all other pewter figures on this list, and in fact the entire dang line from here on.)

: In eight out of every ten cases, the pewter version of Prime came packaged with the left arm of the collectible [[Metroplex (G1)#Super Collection Figure|Metroplex]] build-a-figure; these parts were either in full color or clear-plastic, packed at an equal ratio of four out of eight cases.

{{-}}{{anchor|SCFSilverMatrix}}
[[File:SCF Optimus chase silver.jpg|upright=1.66|thumb]]
*'''Convoy''' (2001)
**''Act'': '''5'''
**''Accessories'': Stand

:This version of Prime was a chase figure in the fifth ''Super Collection Figure'' act, and depicts the Autobot leader, rendered in metallic silver, opening the Matrix, referencing the end of "[[The Return of Optimus Prime, Part 2]]". This figure was packed in at a ''confirmed'' ratio of one per every ten cases.

{{-}}{{anchor|SCFMegatrongun}}
[[File:SCF Optimus Act6.jpg|upright=1.66|thumb|Shadow the Convoy, ow the edge.]]
*'''Convoy (C) with Megatron Gun Mode''' (2002)
**''Act'': '''6'''
**''Accessories'': Extra right fist, stand

:The sixth ''Super Collection Figure'' wave featured yet another mass-release version of Optimus. While this Optimus is wielding Megatron (using the same mold as the chase figure from the second Act), he has entirely new-mold arms, plus an interchangeable empty right fist. On top of that he was extensively redecoed: he's actually cast in different shades of light salmon plastic and heavily painted over in an overall darker, less saturated scheme, his normally-white parts now in medium-gray. His pec-windows are painted with a weird shiny dark blue that gives them a translucent look. The figure was available in both full color and pewter versions in an equal ratio.

: In eight out of every ten cases, the pewter version came with the head for the wave's [[Grand Maximus#Super Collection Figure|Grand Maximus]] build-a-figure, packed at a ratio of six color parts to two pewter per case.

{{-}}{{anchor|SCFStarConvoy}}
[[File:SCF Optimus Star Convoy.jpg|upright=1.66|thumb|Chonktimus Prime.]]
*'''Star Convoy''' (2002)
**''Act'': '''8'''
**''Accessories'': Stand

:After taking a break for the seventh wave, Prime returned for the eighth ''Super Collection Figure'' wave, which would prove to be the final Generation 1-themed set of figures. This figure of Prime in his Star Convoy body was available in both full color and pewter versions in an equal ratio.

:In eight out of every ten cases, the colored version came with the right arm for the wave's [[Scorponok (G1)#Super Collection Figure|Scorponok]] build-a-figure; this part could be in either full color or pewter, at a 4:4 ratio.

{{-}}{{anchor|ConvoySet}}
[[File:SCF Optimus Earth Obliteration.jpg|thumb|upright=1.66]]
*'''Special "The Earth Obliteration Plan": Exclusive Convoy Set''' ([[February 3|Feb 3]] 2002)
**''Accessories'': Stand

:Available exclusively at the Wonder Festival convention, this set includes two metallic-paint versions of Convoy figures from Act 2: the "Convoy w/ Megatron Gun" chase figure (minus the jetpack), and the truck-mode "figure".

: The set was limited to only 1000 units.

{{-}}{{anchor|ConfrontationSet}}
[[File:SCF Optimus Confrontation.jpg|thumb|upright=1.66]]
*'''TF Confrontation Set 01: Convoy vs Megatron''' ([[September 20|Sept 20]]-[[September 22|22]], 2002)
**''Accessories:'' Energon-axe

: Exclusive to the Tokyo Game Show 2002, this special set includes a new version of the original first-Act Optimus Prime figure, along with a new version of the first-Act Megatron. Both are cast in transparent plastic and completely painted over in a grimy, battle-damaged look. Both also come with the interchangeable energon-axe and mace weapons from their first-wave chase figures. Completing the theme of the set is the backdrop of the packaging interior, which depicts [[Sherman Dam]].

: Curiously, Optimus features the larger, rounded-off antennae of the [[Hasbro]] ''Heroes of Cybertron'' version of the mold, which was in production/circulation about the same time.

: As with the above Wonder Festival set, this set was also limited to 1000 units.
{{-}}
==Mega Super Collection Figure==
{{anchor|MSCF}}
*'''Convoy TV Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
*'''Convoy Metallic Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
{{-}}

==''Heroes of Cybertron''==
[[File:HOC Optimus.jpg|upright=1.66|thumb|Hey Spike, pull my finger.]]
*'''Optimus Prime''' (2002/2006)

: Part of the first wave of Hasbro's ''[[Heroes of Cybertron (toyline)#Heroes of Cybertron|Heroes of Cybertron]]'' series, Optimus is a [[redeco]] of the standard ''Super Collection Figure'' Optimus mold, with a ''slight'' [[retool]]ing to give him longer, thicker, rounded-off helmet antennae [[for safety reasons]]. Like all the standard ''Heroes'' figures, he is cast in transparent plastic, then painted over, save for the eyes and a small patch on the back of his head, giving him a [[light-piping]] gimmick. There are a few other small deco differences to the ''Heroes'' version, such as his helmet crest changing from white to gray.

: Optimus was re-released in 2006 as part of a short-lived ''Heroes of Cybertron'' revival, celebrating the 2006 DVD release of the original ''[[The Transformers: The Movie]]''. Cast in solid-white plastic rather than translucent blue, this makes him ''very'' similar to the original ''SCF'' toy, but he retained the thicker antennae, plus got some very minor paint changes on the head: his crest-vent went back to white, and oddly his eyes are white too, rather than the ''SCF'' version's chest-window light blue.

::*''[http://www.tfu.info/2002/Autobot/HoCOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime at TFU.info]''

{{-}}{{anchor|HOCApex}}
[[File:HOC Optimus Apex.jpg|upright=1.66|thumb|Don't tell anyone, but this crap is HEAVY!]]
*'''Powermaster Optimus Prime Apex Armor''' (2002)

: An unexpected addition to the line, especially in the first wave next to another Optimus (see above), "Apex Armor" Optimus is a [[redeco]] of [[Ginrai (robot)#Super Collection Figure|God Ginrai]], the double-armored-up form of Optimus's ''[[Fight! Super Robot Lifeform Transformers (franchise)|Super-God Masterforce]]'' lookalike [[Ginrai (robot)|Ginrai]]. There are a few small paint differences between God Ginrai and Apex Armor Prime (beyond the obvious "opaque vs clear-plastic base figure" thing, we mean), most notably that the many parts on God Ginrai that are darker unpainted gray plastic, like the thighs and side-panels/guns on the lower legs, have been painted the same light gray as the chest on Optimus.

: This is the first Hasbro-release depiction of Optimus in this mode, later backed up with the release of the full-fledged toy of [[Optimus Prime (G1)/toys#PMOP|Powermaster Optimus Prime]] with [[Apex Bomber]] the following year.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeApexArmor/optimusprime.htm More information on ''Heroes of Cybertron'' Powermaster Optimus Prime Apex Armor at TFU.info]''

{{-}}{{anchor|HOCaxe}}
[[File:HOC Optimus Axe.jpg|upright=1.66|thumb|Energon Axe: Only used in [[More than Meets the Eye, Part 2|one episode]]. Ever.]]
*'''Optimus Prime''' (2002)

:This second-wave ''Heroes of Cybertron'' release is a variation of the chase figure from the first ''Super Collection Figure'' wave, depicting Prime with his right hand replaced with his energy axe. This figure is a little different from its Japanese progenitor (beyond the "clear-plastic painted over" deal, of course), being painted in normal matte/gloss rather than metallic paint, and replacing the left "pointing" hand with the clenched fist of the later "communicator" version of Optimus. It also retains the ''Heroes'' molding alterations to Optimus's helmet.

: Oddly, he comes with the same collector card as the first version, and the packaging does not call out the energy weapon in any way. The card-back cross-sell even shows only the original Optimus. (The same happened to this wave's energy-weapon-wielding [[Megatron (G1)/merchandise#Heroes of Cybertron|Megatron]].)

::*''[http://www.tfu.info/2002/Autobot/HoCAxeOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Plasma Weapon at TFU.info]''

{{-}}{{anchor|HOCSpark}}
[[File:HOC Optimus Spark Attack.jpg|upright=1.66|thumb|This can't be [[Spark attack|Spark Attack]]! His is so energetic that... he BURNS.]]
*'''Powermaster Optimus Prime Spark Attack''' (2002)

: In a yet another unusual choice for the line, this second-wave figurine is a redeco of the first God Ginrai/Powermaster Prime Apex Armor PVC figure, cast in translucent orange plastic with red gradients and flame detailing, depicting a "spark attack" mode.

: This is a variant of the ''Super Collection Figure'' "God Fire Guts" God Ginrai chase figure, which had been rendered entirely in solid metallic gold paint.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeSparkAttack/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime Spark Attack at TFU.info]''

{{-}}{{anchor|HOCComm}}
[[File:HOC Optimus Comm.jpg|upright=1.66|thumb|You won't believe where I'm calling you from!]]
*''' Optimus Prime with Communicator''' (2003)

:This fifth-wave ''Heroes of Cybertron'' figure is a release of the Prime figure from the fourth ''Super Collection Figure'' wave, depicting a weaponless Prime talking into the communicator in his left arm. He retains the helmet alterations of the previous versions of the figure.

: This toy also came with the head and weapons for the wave's collectible [[Metroplex (G1)#Heroes of Cybertron|Metroplex]] build-a-figure.

::*''[http://www.tfu.info/2003/Autobot/HoCCommunicatorOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Communicator at TFU.info]''

{{-}}

==Hard Hero==
[[File:HardHero OptimusPrime bust.JPG|thumb|upright=0.85]]
*'''Optimus Prime''' (Bust, 2002)

: Optimus Prime was the first ''Transformers'' bust released by [[Hard Hero]]. He is approximately six inches tall at the head (8.5 at the gun) and is made out of cold-cast porcelain. There were also a version of the bust signed by the sculptor, limited to 100 samples.

{{-}}

[[File:HHero OptimusStatue.jpg|thumb|Not there. There!]]
*'''Optimus Prime''' (Full figure statue, 2003)

:Hard Hero also created a 13-inch tall Optimus Prime statue. It is sculpted pointing with his left hand while holding his ion rifle in his right.

{{-}}

==MyClone==
[[File:Prime-Myclone.jpg|upright=1.67|thumb]]
*'''Optimus Prime (2003)'''
**''Japanese ID number:'' '''MFT001''' and '''MFT006'''
**''Accessories:'' Display base
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

: Optimus Prime was released three times in the [[MyClone]] line, all in the first wave of toys. He was released in both robot and truck mode, while a clear Optimus in robot mode was one of two chase figures along with a clear Megatron.
{{-}}

==Generation 1 Figure-Collection==

[[File:Bottlecap prime gun.JPG|thumb]]

*'''Convoy (gun)''' (2003)
**''Japanese ID number:'' '''C-1'''
**''Accessories:'' Display base

:At only one inch in height, this Optimus "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's Transformers [[Generation 1 Figure-Collection]]. The figure was rendered in both a standard "retro" black and white color scheme, and [[:File:Bottlecap chase prime.jpg|a rare full-color]] [[chase figure|chase]] version, and came with a leaflet, personalized with cartoon screen captures.
{{-}}
[[File:Bottlecap prime pointing.JPG|thumb]]
*'''Convoy (pointing)''' (2003)
**''Japanese ID number:'' '''C-2'''
**''Accessories:'' Display base

:The second Prime figure in the Generation 1 collection was much like the first, only sculpted with an empty hand, pointing off into the distance like a lot of Optimus Prime figures are wont to do.
::*''[http://snakas.web.fc2.com/misc_item/kabaya_bottle.htm More information on the Bottlecap Collection at Autobase Aichi]''

{{--}}

==KT Figure Collection==
[[File:Optimus_Prime_KT.jpg|upright=1.66|thumb|Thanks for helping me... [[City of Steel (episode)|pull myself together.]]]]
*'''Convoy''' (KT Figure Collection, 2004)
: This figure was designed by [[Yuki Ohshima]] and produced by [[KT Figure Collection]]. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in ''[[The Transformers: The Movie]]''.

{{-}}{{anchor|KTFCRevival}}
[[File:Optimus_Prime_ex_KT.jpg|upright=1.44|thumb|No, I am [[redeco|NOT]] [[Ultra Magnus (G1)|Ultra Magnus]]! I'm silver, not [[:File:Magnuslongshot.jpg|white]]]]
*'''Convoy "Revival version"''' (''[[Figure Ō]]'' exclusive, 2004)
: The 82nd issue of the hobby magazine ''[[Figure Ō]]'' came with a [[redeco]] version of Optimus Prime's mini bust. It is painted completely silver, making him appear to be coated with the special alloy from "[[The Return of Optimus Prime, Part 2]]".

{{-}}

==Palisades==
[[File:Palisades WarWithinPrime.jpg|thumb]]
*'''The War Within Optimus Prime''' ([[Palisades Toys|Palisades]], 2005)

:'''The War Within'' Optimus Prime is a six-inch-tall polystone mini statue based on his appearance in the popular [[War Within (franchise)|''War Within'' comic book series]]. Prime stands on a silver Autobot-insignia stand, is decorated with dirt to simulate battle damage, and has articulation in his head and arms. The statue was limited to 1500 pieces worldwide.

{{-}}

==''Titanium Series''==
[[File:TitaniumRMWWPrime.jpg|thumb|Descend, Squattimus Prime.]]
*'''War Within Optimus Prime''' (3" Robot Masters, 2006)
**''Accessories:'' Ion Blaster, display stand

: ''War Within'' Optimus Prime is the second toy representation of Optimus Prime as he appears in ''War Within''. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

: He is squat. Very squat.

{{-}}
{{anchor|TitaniumG1}}
[[File:TitaniumRMG1Prime.jpg|thumb|Drop and give me twenty, soldier!]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand

: The first Titanium representation of G1 Optimus Prime has a well-proportioned sculpt based on his 20th Anniversary toy. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

{{-}}
{{anchor|TitaniumG1BattleDamage}}
[[File:TF-Titanium-Series-3-inch-Robot-Masters-Battle-Damaged-Optimus-Prime.jpg|thumb|"Drop dead and give me 20!"]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand
: This is a repaint of the 3" G1 Optimus Prime titanium figurine, with a 'battle-damaged' deco.
{{-}}{{anchor|tit2pack}}
[[File:Titanium-Series-Optimus-Prime-and-Bumblebee-2pack.jpg|thumb|"You! YOU STOLE MY LAST CESIUM SALAMI!"]]
*'''Optimus Prime & Bumblebee''' (2-pack, 2007)
**''Accessories:'' Ion Blaster, display stand
: A Toys 'R' Us [[exclusive]] two-pack, this set features "Supermetal Finish" (read: shiny) versions of the "Robot Master" ''Titaniums'' Optimus Prime and Bumblebee.

{{-}}

==First 4 Figures==
[[File:First 4 Figures Battlefield Optimus vs Megatron.jpg|thumb|upright=1.66]]
*'''Optimus Prime vs Megatron''' (2006)
**''Accessories:'' extra head for Megatron (with detachable helmet), extra hand for Optimus Prime
{{toydesigner|[[Little IroN]] (concept artist), [["Mad" Alterton]] (sculptor), [[Leandro Sivori]] (painter)}}

:The first entry in the ''Transformers Battlefield'' line by model company [[First 4 Figures]], this 13-inch tall diorama depicts Optimus Prime slugging it out with Megatron. Optimus is posed as though doing a shoulder shove while holding his ion blaster, but a provided "REP" (Replaceable Exterior Part) hand allows buyers to instead recontexualise the pose as a spinning backhand slap. Megatron comes with a REP of a battle damaged version of his head, which features a detachable "helmet" to show off his exposed robo-brain.

:The model was limited to 1,850 pieces worldwide, and came with a numbered certificate of authenticity, which allowed buyers to reserve the same number on their next purchase in the series. It also came with an A4 mini-poster depicting the same fight between Optimus and Megatron by artist [[Little IroN]], which was also sold separately as a limited edition A2 poster.

:As a ''Transformers Battlefield'' release, this model featured a detailed base designed to interlock with others in the same range to create a massive battle diorama. Unfortunately, a general discontinuation of First 4 Figures' ''Transformers''-related output put the kibosh on any further ''Battlefield'' models.

{{-}}{{anchor|F4F1}}
[[File:SnakeEyes OptimusPrime statue.jpg|thumb|upright=1.66|Get with the program.]]
*'''Optimus Prime and Snake Eyes''' (<s>2006</s> unreleased)

:Initially announced at UK Toy Fair in 2006<ref>[https://news.tfw2005.com/2006/01/25/first4figures-beast-wars-and-transformers-vs-g-i-joe-statuesbusts-4267 "First4Figures Beast Wars and Transformers VS. G.I. Joe Statues/Busts"] at TFW2005.com</ref> with a second showing at New York [[Toy Fair]] the following month,<ref>[https://tformers.com/transformers-/5568/news.html "Toy Fair 2006 - First4Figures TF & GI Joe Statues& Busts"] at tformers.com</ref> "Optimus Prime and Snake Eyes" was intended to be one of the first releases in First 4 Figures' ''[[G.I. Joe vs. the Transformers]]'' comic tie-in subline. This 8-inch tall bust depicted a one-armed Optimus Prime in the [[Cobra]] [[H.I.S.S. tank|HISS tank]] body he used in that series holding a battle-ready [[Snake-Eyes#First 4 Figures|Snake Eyes]], directly recreating the cover to the [[G.I. Joe vs. the Transformers issue 1|first issue]] of the comic (originally drawn by [[Mike S. Miller]]).

:Unfortunately, this statue was a casualty of F4F's discontinuation of ''Transformers'' product, the result of a challenging marketplace and lack of retailer interest.
{{canceledtoy}}

{{-}}{{anchor|F4F2}}
[[File:StormShadow OptimusPrime statue.jpg|thumb|upright=0.85|Hey, Private Haircut! I might have taken a bit too much off...YOUR HEAD!]]
*'''Optimus Prime vs Storm Shadow''' (2007)
{{toydesigner | [[Siamak Roshani]], [[Joel Chen]] (sculptors)}}
:The third reveal in the ''G.I. Joe vs. the Transformers'' series, this statue is 7.5 inches tall and depicts [[Storm Shadow#First 4 Figures|Storm Shadow]] in a victorious stance on Prime's damaged, disembodied head, based on the cover of [[G.I. Joe vs. the Transformers issue 5|''G.I. Joe vs. the Transformers'' issue 5]] (also by Miller). Storm Shadow is only a mite bigger than your standard 3.75" ''G.I. Joe'' figure, making this statue roughly in scale with the rest of your collection!

:After being revealed at [[San Diego Comic-Con]] in 2006,<ref>[https://tformers.com/ig.php?mode=album&album=6265&dispsize=800&start=0 Tformers.com's SDCC 2006 gallery]</ref> "Optimus Prime vs Storm Shadow" was released in January 2007, holding the dubious honour of being the only one of First 4 Figures' ''G.I. Joe vs. the Transformers'' range to see release. The statue was limited to 250 pieces in the U.S., and 250 pieces in the UK.

::*''[https://www.yojoe.com/archive/statuary/stormshadowprime/ More information on Optimus Prime vs Storm Shadow at YoJoe.com]''

{{-}}

==Diamond Select==
[[File:Optimus Prime Mini-bust.jpg|thumb|"I can't roll out without my legs installed!"]]
*'''Optimus Prime''' (Diamond Select, 2007)
:A mini-bust of Optimus Prime based on his appearance in the comic was released by [[Diamond Select Toys|Diamond Select]] in 2007. The figure includes the upper body of Optimus Prime, carrying his laser rifle and posed as if preparing to charge. The Matrix of Leadership is sculpted into the base of the statue.

{{-}}
[[File:Ark Globe.jpg|thumb]]
*'''Autobot Snow Globe''' (Diamond Select, 2007)

:Optimus Prime is also featured in Diamond Select's Autobot-themed snow globe, posing above a [[Mount St. Hilary]] base which also features the ''[[Ark (G1)|Ark]]'' and [[Omega Supreme (G1)|Omega Supreme]]. The globe was sculpted by [[Art Asylum]].

{{-}}

[[File:DST08 FinalBattlePrimeBust.jpg|thumb|Hold this for a moment won't you.]]
*'''Final Battle Optimus Prime''' (Diamond Select, 2008)
:Final Battle Optimus Prime was exclusive to the online retailer Action Figure Xpress. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and limited to 1000 pieces. Optimus Prime is shown after his climactic battle with Megatron during Transformers: The Movie; shortly before he passed the Matrix of Leadership (which is also removable here) to Ultra Magnus. His base features the life support readout that monitored both his declining health and eventual death.

{{-}}

{{anchor|G1AnimatedOptimusPrimeBust}}
[[File:DST SDCCToonPrimeBust.jpg|thumb]]
*'''G1 Animated Optimus Prime''' (Diamond Select, 2008)
:G1 Animated Optimus Prime was exclusive to the 2008 San Diego Comic Con. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and features a more matte color scheme to better match the cartoon's palette.

{{-}}

[[File:DiamondSelect PowermasterOptimus.jpg|thumb|"It's not great to be back."]]
*'''Powermaster Optimus Prime''' (Diamond Select, 2010)

:This fourth Optimus Prime bust was to be based on his [[Powermaster]] incarnation, but appears to have been canceled.

{{canceledtoy}}

{{-}}
[[File:DiamondSelect OptimusPrime bustbank.jpg|thumb|"Saving Money is the right to all Sentient Beings".]]
*'''Optimus Prime Bust Bank''' (Diamond Select, 2010)

:A 6-inch hollow Optimus Prime bust to keep your spare change safe! It would've featured articulation in its shoulders and neck, but like the Powermaster bust, it never saw release.

{{canceledtoy}}
{{-}}

==''Transformers'' (2007)==
*'''Optimash Prime''' (2007)
{{main|Optimash Prime}}
{{-}}
[[File:Softimus Prime.jpg|thumb|Freedom is the right of all sentient beings... in bed.]]
*'''Softimus Prime''' (2007)

:Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He features Movie-style faction symbols on his right arm and both sides of his cab mode. He is love.

::*''[http://www.tfu.info/2007/Autobot/SoftimusPrime/softimusprime.htm More information on Softimus Prime at TFU.info]''

{{-}}

==''Robot Heroes''==
[[File:RH Optimus vs Ravage.jpg|thumb|upright=1.66|Mini-Me!]]
*'''Optimus Prime & Ravage''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Part of the first wave of ''[[Robot Heroes (toyline)|Robot Heroes]]'' 2-packs (sold under the [[Transformers (2007 toyline)|2007 live-action-movie line]] branding), Optimus Prime is a simple, yet well-detailed two-inch tall figurine with exaggerated, cartoony proportions, with swivel articulation at the neck and shoulders. He is sculpted holding his Ion Blaster rifle in his right fist and his left arm in a pointing pose. He is also love, and demands that you pull his [[More than Meets the Eye, Part 3#Notes|Finger of Doom]].

: He was sold in a two-pack with [[Ravage (G1)/toys#Robot Heroes|Ravage]], positioned in a way that gives an impression of [http://orig12.deviantart.net/b22b/f/2008/216/7/1/optimus_prime_vs_ravage_by_cobaltkitty.jpg him freaking out to Ravage's size].

: This version of Optimus was later also released as part of a set with a 100-piece [[jigsaw puzzle]] with no apparent changes.

{{anchor|RHBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: In some countries outside of North America, Optimus Prime was released individually in a blindpack with no notable changes.

{{-}}{{anchor|RH5pack}}
[[File:Robot Hero Supermetal Optimus Prime.jpg|thumb|upright=0.99|Cuteness is the right of all sentient beings.]]
*'''Decepticon Sneak Attack''' (Multi-pack, 2007)

: "Optimus Prime with Supermetal Finish" is a slightly-shinier [[redeco]] of the previous ''Robot Heroes'' figure; this is the most noticeable with his blue parts, which are now in a much brighter, richer gloss-blue paint rather than the unpainted darker-blue matte plastic of the two-pack version.

: He came in a [[Walmart]] exclusive multipack, alogn with [[Mirage (G1)/toys#RH5pack|Hologram Mirage]], [[Cliffjumper (G1)/toys#Robot Heroes|Cliffjumper]], "Supermetal Finish" [[Megatron (G1)/merchandise#RH5pack|Megatron]], and [[Skywarp (G1)/toys#Robot Heroes|Skywarp]].

{{anchor|RHFinishBlindpack}}
*'''Optimus Prime with Supermetal Finish''' (Single-pack, 2008)

: "Supermetal Finish" Optimus Prime also saw release in a blindpack outside of North America.

{{-}}{{anchor|RHUnicron}}
[[File:RH Prime vs Unicron.jpg|thumb|upright=1.66|'Til all are cute.]]
*'''Optimus Prime & Unicron''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Sold in the third wave of ''Robot Heroes'', this version of Optimus is posed opening the [[Matrix of Leadership]], complete with clear-plastic shine.

: He was packed with a very small [[Unicron/toys#Robot Heroes|Unicron]].

{{anchor|RHMatrixBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: Just like the previous figures, the Matrix-bearing Prime also received a blindpacked release.
{{--}}

==''Attacktix''==

*'''Optimus Prime''' (Starter Set, 2007)
[[File:Attacktix Optimus Prime.jpg|thumb|He shoots sideways. The direction, not [[Sideways (Armada)|the character]].]]
{{attacktix
|ID=TF2-19
|faction=Autobot
|class=Leader
|special=Last Stand - 13/26 (50%) success ratio
|cost=40
|speed=6
|attacktype=Shooter (Force Blast)
}}
{{-}}
:Optimus Prime will shoot you down. He was released as part of the 2007 Starter Set along with ''[[The Transformers (franchise)|Generation 1]]'' [[Megatron (G1)/toys|Megatron]], ''[[Transformers: Energon (franchise)|Energon]]'' [[Landquake (Energon)|Landquake]] and ''[[Transformers: Cybertron (franchise)|Cybertron]]'' [[Skywarp (Armada)|Skywarp]].

:Optimus' Last Stand special allows him to stand up if he's the only figure in your team left in play. If you're down to two men you might even be tempted to shoot your own man just to keep Optimus Prime in play. Don't though. [[Peter Cullen]] wouldn't approve.

:Sadly you can't bring him into play with the ''Cybertron'' [[Optimus Prime (Armada)/toys|Super Optimus Prime]] vehicle mode because he's not ''Super'' Optimus Prime.
{{-}}

==''Revoltech''==
[[File:Revoltech Convoy.jpg|thumb|upright=1.66|Windowbra! ''(2007 Version pictured)'']]
*'''Convoy''' (2007/2014)
**''Series number:'' '''019'''
**''Legacy of Revoltech ID number'': '''LR-008'''
**''Accessories:'' Ion blaster, Autobot Matrix of Leadership, two clenched fists, gun-wielding right hand, pointing right hand, open left hand

:A non-transforming but ''highly'' articulated Optimus Prime action figure, ''[[Revoltech]]'' Convoy uses the ''Revoltech'' "revolver joints" for maximum poseability. Prime comes with his now-standard ion blaster and Matrix of Leadership accessories, as well as a few alternate hands; while one of the hands is specifically designed to grip the ion blaster, he can't really do anything dramatic with the Matrix, and it just sort of sits in his open-palmed left hand. His sculpting is explicitly in the style of [[Pat Lee|Pat "serfdom" Lee]]'s interpretation of Prime, but due to physical constraints has no lack of perspective.

:Unsurprisingly, this mold was redecoed to create ''Revoltech'' [[Ultra Magnus (G1)/merchandise#Revoltech|Ultra Magnus]]. Magnus comes with a new hand mold that can be used to connect him and Prime together in a handshake.

:The initial reveal of the figure (sculpted by Yamaguchi) features swiveling cut joints instead of "revolver joints" (notably the hip parts), with a rather jarring angled joint on the waist (which results in a "sliced" appearance if swiveled).

:Unfortunately, ''Revoltech'' Convoy cannot be distributed to the US due to licensing restrictions, so fans must rely on online hobby shops to import him.

:In 2014, ''Revoltech'' Convoy was reissued as part of the ''Legacy of Revoltech'' line, with an increased price of 3900 yen. This rerelease uses revised Revoltech joints, which come in matte black instead of glossy and have more ratcheting points than previous releases.
{{-}}
===''Amazing Yamaguchi''===
[[File:Tf-Yamaguchi-Revoltech-014-Convoy.jpg|upright=1.66|thumb]]
*'''Convoy''' (2019)
**''Series number:'' 014
**''Accessories:'' Ion Blaster, Energon Axe, 1 pair of splayed hands, 1 pair of trigger hands, left clawed hand, right pointing hand, interlocked hand

:''Amazing Yamaguchi'' Convoy is an all-new take to the Revoltech figure above, but more poseable. Apart from the Ion Blaster, this figure comes with an Energon Axe accessory, and an interlocked hand accessory that is designed to resemble the haymaker that took down Megatron in ''[[The Transformers: The Movie]]''.

:Unlike the first Revoltech figure, Convoy features painted-details-on-colored-plastic rather than fully coating them. The plastic is noted to have a hollow feel compared to the first figure.

:Due to production delays, the release date was rescheduled from September 29 to October 24.
{{-}}

==Sota Toys==
*'''Transformers Chess Set''' (<s>2007</s>)
:An Optimus Prime piece was to be the Autobot-side King on a [[Chess#Sota Toys|chess set]] based on Generation 1, but the set apparently never saw release.
{{canceledtoy}}
{{-}}

==Ornaments==
*'''Optimus Prime''' (2007)
[[File:OptimusPrimeG1Ornament.jpg|thumb|100px|''(American Greetings version pictured)'']]

:Manufactured by [[American Greetings]] as part of their Heirloom ornament collection, this hanging sculpt of Optimus Prime is based upon the 20th Anniversary toy release.
{{-}}

*'''Optimus Prime''' (2014)
[[File:Optimus-prime-keepsake-Hallmark.jpg|thumb|''(Hallmark version pictured)'']]
:Manufactured by [[Hallmark]] as part of their Keepsake ornament collection as part of the Hasbro series which includes ornaments based on [[My Little Pony]] G1, the electronic game Simon, and the board game Sorry, this hanging sculpt of Optimus Prime is based upon the original G1 toy cab in robot mode posed like 1984 box art.
{{-}}

==''Mighty Muggs''==
[[File:MightyMuggs OptimusPrime.jpg|thumb|Optimus lost his ears in the rock tumbler.]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: This [[super deformed]], non-transformable Optimus Prime figure uses the standard [[Mighty Muggs]] body template, with swivel joints in his neck and limbs. He comes with a similarly super-deformed version of his ion rifle.
{{-}}

{{anchor|SDCCmightymugg}}
[[File:MightyMuggs MetallicOptimusPrime.jpg|thumb|Optimus, did you polish your head in the Shine-O Ball-O?]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: An [[exclusive]] to the 2009 [[San Diego Comic-Con]], this Optimus Prime Mugg has a shiny metallic finish.
{{-}}

{{anchor|2018mightymugg}}
[[File:MightyMuggs 2018 Optimus.jpg|thumb|upright=1.44|You ever get so mad you sprout new ears?]]
*'''Optimus Prime''' ([[2018]])
**''ID number:'' '''01'''

: Based on his [[evergreen]] design, this Optimus is part of the 2018 ''Mighty Muggs'' relaunch. As part of the new line, he has a helmet that can be pressed down to change his expression. He features three different faces: [[Mouthplate|classic]], angry, and angrier.
{{-}}

==Transformers Wacky Wobblers==
[[File:WackyWobblers G1OptimusPrime.jpg|thumb|upright=0.85]]
*'''Optimus Prime''' (2009)

: This Optimus Prime {{w|bobblehead}} is part of the popular ''[[Wacky Wobblers]]'' line produced by {{w|Funko}}. Aside from the standard-issue big wobbling head, he features an ion rifle molded onto his right hand and his arms swivel at the shoulders. Optimus is affixed to a base with his name on it.
{{-}}

==USB-Powered Speaker Head==
*'''Optimus Prime USB-Powered Speaker Head'''
[[File:G1-optimusprime-merc-speaker.jpg|thumb]]
: As a 6.5" figure, Optimus Prime's head contains twin {{w|Universal Serial Bus|USB}}-powered speakers. There are two speakers inside each side of his head. The control panel, USB port, and earphone port are located in the back of the head. Under the neck, there is a display to support the head.
: The speaker was redecoed to create Ultra Magnus Speaker.
{{-}}

==Transformers Backpacks==
*'''Optimus Prime''' (2009)

:Made by [[F*A*B Starpoint]], these backpacks are allegedly "engineered for style, safety, comfort... and saving the Universe!" The Generation 1 Optimus Prime design features a stock silhouette of Optimus Prime surrounded by stars, like the [[Paramount Pictures]] logo, while on the lower compartment there is a gigantic Autobot sigil.

==Universal Studios==
*'''Optimus Prime plushie''' (2011)

:Created for the [[Transformers: The Ride – 3D|Transformers ride at Universal Orlando]], a [[super deformed]] plush toy of Optimus was made available at the Supply Vault gift shop near the opening of the ride.

==Tomica==
[[File:TF-Tomica-Wrapping-Trailer.jpg|thumb]]
*'''Transformers Wrapping Trailer''' (2011)
:''[[Tomica]]'' "Transformers Wrapping Trailer" is a die-cast, non-transforming semi tractor-trailer. A redeco of the 2008 "[[wikia:tomica|Tomica Hero: Rescue Force Trailer]]" toy, "Transformers Wrapping Trailer" renders the cab in Generation 1 Optimus Prime colors, while the trailer is decked out with pictures of [[live-action film series]] [[Optimus Prime (Movie)|Optimus Prime]], [[Bumblebee (Movie)|Bumblebee]] and [[Ironhide (Movie)|Ironhide]]. Like all Tomica toys & all [[Go-Bot (G2)#Toys|''Generation 2'' Go-Bots]] and [[Spychanger]]s, Wrapping Trailer features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces.
{{-}}

==Transformers x Mimobot==
[[File:Mimobot OptimusPrime.jpg|thumb|upright=1.66|Why the long face?]]
*'''Optimus Prime Mimobot''' (Mimoco, 2011)
:Produced by [[Mimoco]] as part of their multi-brand line of designer USB "Mimobot" flash drives, this Optimus Prime memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.
{{-}}

==Cuponk==
[[Image:NYCC2011 Cuponk.jpg|thumb|250px|The real contest is whether Prime's medal or Megatron's belt is cooler.]]
*'''Transformers Cuponk''' (2011)
:A New York Comicon exclusive, this set includes two Cuponk cups and 6 ping pong balls. Prime is featured on one cup and one ping pong ball. The same cup also features [[Bumblebee (G1)|Bumblebee]], [[Jazz (G1)|Jazz]], [[Grimlock (G1)|Grimlock]], and [[Hot Rod (G1)|Hot Rod]].
{{-}}

==Titan Warriors==
[[File:Titan-Warrior-Optimus-Prime.jpg|upright=1.11|thumb|Sofubi Hero figures are the right to all young sentient beings.]]
*'''Titan Warrior 5-Pack''' (2013)
:Available at San Diego Comic Con 2013, This Optimus Prime is a 6" PVC Titan Warrior figure (similar to Bandai's ''Ultra/Sentai/Rider Hero, Movie Monster Series'') representing his Generation 1 character. He was packed with [[Grimlock (G1)/toys|Grimlock]], [[Megatron (G1)/toys|Megatron]], [[Starscream (G1)/toys|Starscream]] and [[Soundwave (G1)/toys|Soundwave]].

*'''Optimus Prime''' (Titan Warrior, 2014)
:The Titan Warriors Optimus Prime toy was released individually, under the Beast Hunters Titan Heroes subline.

{{-}}

==''The Loyal Subjects''==
*'''Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Talking}}
*'''Talking Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Larger}}
*'''Talking 5.5" Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Blank}}
*'''8" Blank/DIY Optimus Prime''' (2014)
{{anchor|The Loyal Subjects OG}}
*'''8" OG Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Fiberglass}}
*'''4' Fiberglass Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Hot Topic}}
*'''Talking 5.5" Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Dead}}
*'''8" Dead Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Silver}}
*'''8" Silver Bullethole Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Gold}}
*'''8" Gold Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Black Gloss}}
*'''8" Black Gloss Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Gamestop}}
*'''Talking Optimus Prime''' (2014)
{{charstubtoys}}
{{-}}

==''Mecha Nations''==
[[File:klog tfop 003.jpg|thumb|upright=1.66|Prime, not the shrink wrap!]]
*'''Optimus Prime''' (2014)
**''ID Number:'' '''MN01'''
**''Accessories:'' Ion Blaster, Energon Axe, Removable Armor.

:Created by [[Kids Logic]], this [[super deformed]] G1 Optimus Prime stands 6" tall and is articulated. He features a metallic color scheme, removable armor and replacement hands. He also features LED light up eyes, lights, weapons and [[Matrix of Leadership|Creation Matrix]].

:This figure was also redecoed into Mecha Nations [[Nemesis Prime (G1)#Mecha Nations|Black Convoy]] and [[Ultra Magnus (G1)/merchandise#Mecha Nations|Ultra Magnus]].

{{-}}

==''Ultimetal''==
[[File:Ultimetal-UM01-Optimus-Prime.jpg|upright=1.66|thumb|"Why waste your money so easily Prime?"]]
*'''Optimus Prime''' (2014)
**''ID number:'' '''UM-01'''
**''Accessories:'' Ion blaster, energon-axe, small Matrix, 24 armor pieces, 2 smokestacks, large Matrix, display stand, 8 display stand parts, remote control

: ''Ultimetal'' Optimus Prime is a large non-transforming figure produced by [[Art Storm]], standing at an impressive 1 foot 4 inches/43 cm and made from extensive [[die-cast]] metal. Packaged in four different boxes, he features plenty of articulation and detail, including an opening chest and numerous magnetically attached armor panels that, when removed, reveal Prime's internal anatomy. He also has electronic light-up eyes and roof lights as well as 20 spoken English phrases, all activated via remote control. His [[mouthplate]] even moves when he talks, just like in the cartoon!

: Prime comes with an ion blaster which can also be opened to reveal technical detail, an energon-axe, and two Matrices of Leadership of different sizes. The smaller one fits into his chest, where it can be lit up by an LED, while the larger one lights up on its own and can be held in his hands or placed on display. Prime's display stand has smaller stands for the Matrix and ion blaster and also has light-up parts.

: Optimus Prime was recolored into the inner robot of ''Ultimetal'' [[Ultra Magnus (G1)/merchandise#Ultimetal|Ultra Magnus]].

::*''[http://artstorm.co.jp/ultimetal_optimusprime.html More information on ''Ultimetal'' Optimus Prime at Art Storm's official site]''

*'''Optimus Prime - Battle Damaged''' (2018?)
**''ID number:'' '''UM-01BD'''

{{-}}

==''EX Gōkin''==
[[File:EXGokin Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2014)
**''Accessories:'' Two fists, two open hands, two gripping hands, right pointing hand, ion blaster, energon-axe, display stand

: A 6.6-inch tall non-transforming Optimus Prime action figure was produced by Art Storm as part of their ''EX Gōkin Transformers Series'' line. He comes with his trademark blaster and energon-axe as well a number of extra hands, and his chest opens to reveal a non-removable Matrix.

::*''[http://artstorm.co.jp/exgokin_transformersseries_convoy.html More information on ''EX Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==Hikari==
[[File:HikariLimitedEditionMetallicOptimusPrime.jpg|thumb|upright|150px]]
*'''Metallic Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime with a metallic finish. This figure is a limited edition, and limited to 2,000 pieces.

:This mold was also used to make the other limited edition Optimus Primes seen below.

{{-}}
[[File:HikariLimitedEditionClearGlitterOptimusPrime.jpg|thumb|upright|150px]]
*'''Optimus Prime Clear Glitter''' (2014)

:A non-transforming vinyl Optimus Prime figure. While retaining the classic, original colors, this mold is redone to be clear plastic, with glitter bits put into the figure. This vinyl is a limited edition, and limited to 3,000 pieces.

{{-}}
[[File:HikariLimitedEditionBattleReadyOptimusPrime.jpg|thumb|upright|150px]]
*'''Battle Ready Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The mold is Redon again, this time in a battle-damaged look, while he retains the classic Optimus Prime colors. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionGreySkullOptimusPrime.jpg|thumb|upright|150px|By the power of Grayskull... '''''I HAVE THE POWER!''''']]
*'''Grey Skull Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. This vinyl takes the colors in a different way, which is mostly white with some dark grey areas. The colors to kinda look skeleton-ish. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDistressedOptimusPrime.jpg|thumb|upright|150px]]
*'''Distressed Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The colors take on an [[Optimus Prime (Movie)#''Age of Extinction'' film|Age of Extinction Optimus Prime]], in his flat-nose truck mode. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionFireOptimusPrime.jpg|thumb|upright|150px]]
*'''Fire Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in clear plastic. The colors seem to homage the Generation 1 [[Hot Rod (G1)|Rodimus Prime]].,This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDangerousOptimusPrime.jpg|thumb|upright|150px]]
*'''Dangerous Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, done in a camouflage style. This figure is a limited edition, and limited to only 600 pieces.

{{-}}
[[File:HikariLimitedEdition24KOptimusPrime.jpg|thumb|upright|150px]]
*'''24K Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in gold plastic. This figure is a limited edition, and only limited to 600 pieces.

{{-}}
==''Thrilling 30''==
*'''Optimus Prime''' (Collectible Figurine, 2014)
**''Series / Number:'' '''1 / #1'''
**''Accessories:'' Collector's base
:A super-deformed Optimus Prime was released among the blindpacked [[Thrilling 30#Collectible Figurines|''Thrilling 30'' Collectible Figurines]] by [[Goldie Marketing]]. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

*'''Collectible Figurines''' (5-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 5 Collector's bases
:The same Optimus Prime figurine was also available in a 5-pack alongside [[Megatron (G1)/merchandise#Thrilling 30|Megatron]], [[Ratchet (G1)/toys#Thrilling 30|Ratchet]], [[Starscream (G1)/merchandise#Thrilling 30|Starscream]] and [[Soundwave (G1)/merchandise#Thrilling 30|Soundwave]].

*'''Optimus Prime 3-pack''' (3-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 3 Collector's bases
:The same Optimus Prime figurine was ''also'' available in a 3-pack alongside [[Optimus Prime (WFC)/merchandise#Thrilling 30|''Prime'' Optimus Prime]] and [[Optimus Prime (Movie)/merchandise#Thrilling 30|Movie Optimus Prime]].
{{-}}

==Leg Avenue==
{{anchor|LegAvenue}}
[[File:Leg Avenue Optimus Prime.jpg|right|upright=.75|thumb|]]
:Costume and lingerie manufacturer Leg Avenue released an officially licenced Bumblebee costume along side ones for [[Bumblebee (G1)/merchandise#LegAvenue|Bumblebee]] and [[Megatron (G1)/merchandise#LegAvenue|Megatron]].

{{-}}

==''Tiny Titans''==
*'''Optimus Prime''' (Tiny Titans, 2015)
**''Series'': '''2'''
**''Number'': '''10/12'''

: Part of the third assortment of ''[[Tiny Titans]]'' [[blindpacking|blindpacks]], this version of Optimus Prime is a very small, soft-plastic figure of him in robot mode, brandishing both his rifle and his energy-axe weapon in a running battle pose.

: He includes a collectible card that renders him in the [[Transformers: Robots in Disguise (2015 franchise)|2015 ''Robots in Disguise'']] styling. The card includes a scan-badge for the [[Transformers: Robots in Disguise (mobile game)|''Robots in Disguise'' mobile game]], which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.

{{-}}{{anchor|TinyTitans2}}
[[File:TinyTitans OptimusG1S5.jpg|upright=1.67|thumb]]
*'''Optimus Prime''' (Tiny Titans, 2016)
**''Series'': '''5'''
**''Number'': '''11/12'''

: Part of the fifth assortment of ''Tiny Titans'', this version of Optimus is in a more neutral pose, this time only carrying his rifle.

: As per usual, he includes a collectible card that includes a scan-badge for the ''Robots in Disguise'' mobile game, which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.
{{-}}

==''D-Style''==
[[File:D-Style-OptimusPrime.jpg|thumb|upright=1.66|You got D-touch. You got D-power]]
*'''Convoy''' (2015)
**''ID number:'' '''43'''
**''Accessories:'' Two fists, pointing right hand, Ion blaster, energon-axe, Autobot Matrix of Leadership, Convoy cab with trailer

:An Optimus Prime was produced by [[Kotobukiya]] as part of ''[[D-Style]]'', their franchise-spanning line of super deformed model kits. His accessories include an ion blaster, an energon-axe, a Matrix that can store in his chest, and a tiny super deformed representation of his truck mode which can carry the ion blaster. Moving his antennae causes his mouthplate to move up and down.

:For a small figure it includes a large amount of articulation, including ankle tilts and top of legs tilting away from the yellow codpiece.

: The Convoy Trailer, ion blaster and the gold part of the Matrix all require painting. In addition, on promotional images ''all'' the black details and lines (for example on the front thighs and round the edge of the yellow codpiece) are painted and the eyes have been painted blue instead of left as clear plastic.

: Amusingly, the head has the [http://www.1999.co.jp/itbig29/10294593z.jpg mouth-less face] underneath Optimus' mouthplate, as a either a reference to the error from [[The Search for Alpha Trion]] or limitation in the model kit (or both).

:This mold was also used to make ''D-Style'' [[Nemesis Prime (G1)#D-Style|Black Convoy]].
{{-}}

==''ES Gōkin''==
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe, Matrix, left & right gripping hands, left & right open hands, left & right pointing hands, display stand

:Optimus Prime was also released as part of Art Storm's ''ES Gōkin'' series, a line of posable super deformed figures. He comes with his trademark gun which he can hold in either hand, an energon-axe that plugs into his wrist sockets, and a Matrix he can hold but not store in his chest.

::*''[http://artstorm.co.jp/esgokin_convoy.html More information on ''ES Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==''D-Collection''==
[[File:D-Collection Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe

:[[Kabaya]]'s ''D-Collection'' Optimus Prime is a small super deformed figure that requires some assembly and features articulation limited to his shoulders. He comes with his trademark blaster and axe accessories. Sold blindpacked, Prime is available as both a standard full color figure and a rare clear plastic version. He comes with chewing gum.
{{-}}

==''Metal Earth''==
[[File:Metal Earth Optimus Prime.jpg|thumb]]
*'''Optimus Prime''' (2015)
**''ID number:'' '''MMS300'''
:''[[Metal Earth]]'' Optimus Prime is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".
{{-}}
[[File:Metal Earth Legends Optimus Prime.jpg|thumb|[[Minecraft|Minecraft x Transformers]] before ''Minecraft x Transformers'' was a thing]]
*'''Optimus Prime''' (Legends, 2019)
**''ID number:'' '''MEM055'''
:''Metal Earth Legends'' Optimus Prime is a DIY 3D steel model kit in the shape of a super deformed version of the [[evergreen]] Optimus design. The kit's difficulty rating is given as "moderate".
{{-}}

==Hot Toys==
*'''Optimus Prime (Starscream Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Ion Blaster, two wings, two wing mounts, two null-rays, Matrix of Leadership, Base, Starscream's head (Sideshow Collectable's exclusive)

:Released by [[Hot Toys]] this high end collector figure stands approximately 30 cm tall. It features LED light up eyes and it's chest can open to reveal a LED light up, removable Matrix of Leadership. This version comes with a pair of wings and two [[null-ray]]s from Starscream that Optimus can attach. The Sideshow exclusive version of this comes with Starscream's severed head.

*'''Optimus Prime (Megatron Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Fusion cannon, Ion Blaster, gun with stock, set of wheels, two cannon mounting accessories, shoulder mount, Matrix of Leadership, Base

:This version of the figure has accessories themed from Megatron. These include Megatron's [[fusion cannon]], and a long rifle that passingly resembles Megatron's original gun mode. Both can be combined into a large two handed cannon.

{{-}}

==''Block Wars''==
*'''Optimus Prime''' (2016)
**''Number:'' '''1'''

:Part of [[Kabaya]]'s ''[[Transformers Block Wars]]'' candy toy line, this Optimus Prime kit is surprisingly, based on his [[Optimus Prime (G1)/toys#Cyber Series|Cyber Series Commander toy]]. Molded in red, blue, and yellow plastic with detailing from stickers, he transforms into a truck when finished and is armed with a two-pronged spear. He can also be taken apart and combined with ''Block Wars'' [[Bumblebee (G1)/toys#Block Wars|Bumblebee]], [[Megatron (G1)/merchandise#Block Wars|Megatron]] and [[Starscream (G1)/toys#Block Wars|Starscream]] in various configurations, the ones involving Prime shown on the packaging being:

:*Giving Prime Starscream's wings as a jetpack and arming him with Megatron's cannon.
:*Placing Megatron's turret on Prime's truck mode.
:*Giving Bumblebee Prime's spear, Megatron's arms and Starscream's wings.
:*Attaching Prime and Starscream's legs to Megatron's vehicle mode to create a walking tank.
:*Powering Starscream up by attaching Prime's spear to his back and giving him Bumblebee's weapons.
:*Combining all four into an unnamed combiner, with Optimus Prime forming the torso and upper legs.

==''Transformers Figure Collection''==
[[File:TF-Transformers-Figure-Collection-Optimus-Prime-Decoy.jpg|thumb]]
*'''Convoy''' (01-2016)

:Standing 42mm tall, ''Transformers Figure Collection'' Optimus Prime is a non-poseable soft-rubber figure greatly based on a [[Decoy (G1)|Decoy]] figure.

{{-}}

==''Hero of Steel''==
[[File:HeroofSteel Convoy.jpg|thumb|upright=1.11]]
*'''Convoy''' (2016)
**''Accessories:'' Ion blaster

:Produced by Alpha Max, ''Hero of Steel'' Convoy is a stylized, non-transforming figure standing at 9 inches/23 cm tall. He comes with his ion blaster.

{{-}}

==Bitfig==
[[File:Bitfig-Part-1.jpg|thumb|]]
*'''Convoy''' (12-2016)
Part of the first wave of Transformers Bitfig capsule toys by [[TakaraTomy A.R.T.S]],
Convoy's design is inspired by his appearance in the G1 cartoon, and is articulated at the neck and shoulders.
Bitfig toys were packaged in capsules color coded to the toy they contained.
{{-}}

==Prime 1 Studio==
===''Premium Masterline''===
[[File:TF-Premium-Masterline-PMTF-01-Optimus-Prime.jpg|upright=1.55|thumb|"Just in case you want to say "''I should've looked like this in the movies''", yes, I heard you."]]
*'''Optimus Prime''' (2017)
**''ID Number'': '''PMTF-01''' / '''01EX''' (exclusive)
**''Accessories'': Base, Fusion axe (exclusive), Energy axe (exclusive)

:One of the very first releases of the ''Premium Masterline'' series by [[Prime 1 Studio]], this Optimus Prime is a ''massive'' non-transforming statue based on his Generation 1 appearance with a blend of live-action film aesthetic, and features light-up LED eyes. The statue was also designed by [[Josh Nizzi]] himself. If customers had purchased the statue at [https://www.sideshowtoy.com/collectibles/transformers-optimus-prime-transformers-generation-1-prime-1-studio-9027641/ Sideshow's website], they would receive exclusive Energy and Fusion axes, which can be used to replace Prime's Ion Blaster-holding hand. The standard version was limited to 1500 pieces, while the exclusive version was limited to 750 pieces.

:This statue was later redecoed as [[Nemesis Prime (G1)#Prime 1 Studio|Nemesis Prime]] and [[Ultra Magnus (G1)/merchandise#Prime 1 Studio|Ultra Magnus]]. The statue's model also served as an inspiration to [[Optimus Prime (Movie)|Movie Optimus Prime]]'s appearance in the ''[[Bumblebee (film)|Bumblebee]]'' film.

{{-}}{{anchor|P1SGold}}
[[File:TF-Premium-Masterline-PMTF-01GL-Optimus-Prime-Gold-Edition.jpg|upright=1.55|thumb]]
*'''Optimus Prime Gold Version''' (2018)
**''ID Number'': '''PMTF-01GL'''
**''Accessories'': Base, Fusion axe

:Limited to 500 pieces, Optimus Prime Gold Version is a redeco of the statue above, evoking his Electrum-coated appearance in the Generation 1 episode "[[The Golden Lagoon (episode)|The Golden Lagoon]]". He also comes with a Fusion axe accessory that can replace his Ion Blaster hand.

{{-}}
===''Age of Time''===
[[File:Prime 1 Studio Superior Optimus Prime.jpg|upright=1.55|thumb]]
*'''Superior Optimus Prime''' (<s>201?</s>)

:''Age of Time'' Superior Optimus Prime was designed to be the "ultimate amalgamation" between G1 and movie Optimus Primes. He would have come with two blasters and a huge jetpack, specifically taking cues from Prime's combined form with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]''.

:For reasons unknown, this figure was silently canceled.
{{canceledtoy}}

{{-}}
===''Cutie1''===
[[File:Cutie1 Optimus Prime Figure.jpg|upright=1.11|thumb|''Transformers X Coraline'', directed by [[Travis Knight]].]]
*'''Optimus Prime''' (2022)
**''ID Number'': '''No:055'''
**''Accessories'': Stand

:A striking departure from previous Prime 1 Studio offerings, ''Cutie1'' Optimus Prime is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

:He was later redecoed as ''Cutie1'' [[Nemesis Prime (G1)#Cutie1|Nemesis Prime]].

{{anchor|Cutie1keychain}}
*'''Optimus Prime''' (Keychain, 2021)
**''Accessories'': Stand, chain

:Part of a marketing push following the announcement of the figure above, an acrylic keychain of ''Cutie1'' Prime was released, along with other products such as stickers, T-shirts, hand towels and totebags using the design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.

{{-}}{{anchor|P1SWFC}}

===''War for Cybertron Trilogy''===
[[File:Prime-1-Studio-WFC-Optimus-Prime.jpg|upright=1.66|thumb|"Why... have I... been... canceled?"]]
*'''Optimus Prime''' (<s>2022</s>)
**''ID Number'': '''PMTF-05''' / '''05UT''' (Ultimate Version)
**''Accessories'': Base (standard), base with Shockwave (Ultimate Version)

:A statue based on Optimus Prime's appearance in the ''[[Transformers: War for Cybertron Trilogy (cartoon)|War for Cybertron Trilogy]]'' cartoon. The exclusive version includes a defeated [[Shockwave (G1)/toys#Prime 1 Studio|Shockwave]] as part of the statue's base.

:This item was canceled due to the combination of rising production costs and insufficient preorders.
{{canceledtoy}}
{{-}}

==My Busy Books==
[[File:TF-My-Busy-Books-Transformers-Optimus-Prime-figurine.jpg|upright=1.66|thumb]]
*'''Transformers: My Busy Book''' (2017)

:Included with the [[Transformers: My Busy Book|10-page board book]], 12 figurines, and a playmat, Optimus Prime is represented by a pair of small, PVC non-transforming figurines of his robot and his semi-truck alternate mode, based on his [[evergreen]] design. Like most of the land-based vehicle figurines, his wheels do not roll.

:In terms of quality control, the figurines' paint applications can be... shoddy. If you're a collector who prefers to display them, you should resign yourself from buying it or try to [[customizing|customize]] the figures with better paint applications if you have the skills.
{{-}}

==Rubik's Crew==
[[File:Rubiks Crew Optimus.jpg|upright=1.66|thumb]]
*'''Rubik's Crew Game: Transformers Optimus Prime Edition'''<ref>[https://www.hasbro.com/en-us/product/rubik-s-crew-game-transformers-optimus-prime-edition:70976F4B-5056-9047-F52F-5BB6105031BB Rubik's Crew Game: Transformers Optimus Prime at hasbro.com]</ref> (2017)
This [[super deformed]] version of [[Optimus Prime (G1)|Optimus Prime]]'s robot mode has a detachable "Puzzlehead" that functions like the [https://www.rubiks.com/store/puzzles/rubiks-2x2 2x2] [[Rubik's Cube]].
{{-}}
{{-}}
==Fidget Its==
[[File:TF-Fidget-Its-Optimus-Prime.jpg|upright=1.66|thumb|Before time began, there was...the Cube.]]
*'''Optimus Prime''' (Fidget Its, 2017)

:''Fidget Its'' Optimus Prime is a non-transforming cube-shaped figurine, built for for your fidgeting needs! His pair of eyes & his forehead can be pushed like buttons, his right arm can swivel, his rear section can be fiddled like a combination lock dial, and his left arm can be moved up, down, up, and down.

{{-}}

==Hauck==
[[File:Hauck Go Kart Optimus.jpg|upright=1.66|thumb|Everyone wants to ride Optimus.]]
*'''Optimus Prime Go Kart''' (2017)
:Manufactured by [[Hauck toys]], the Optimus Prime go-kart is a small, pedal-operated vehicle for kids aged 4-8 years old. Cast in the image of Optimus (even featuring his head sculpted on the front), the kart features an adjustable seat as well as a brake.
{{-}}

==Colorcasa==
[[File:Gen-Colorcasa Optimus Prime Spoon Fork.jpg|upright=1|thumb|Eating is the right of... yeah you know the gist.]]
*'''3D Children Tableware''' (2017)
:Chinese company Colorcasa released a pair of children-sized cutlery in the form of a cute (though angry-looking) Optimus Prime, one as a spoon and another as a fork. They were branded as ''Generations'' products.
{{-}}

==Threezero==
===Premium===
*'''Optimus Prime - Classic Edition''' (Premium Scale, 2017)
**''Accessories:'' TBA
{{charstubtoys}}
{{-}}
===DLX===
*'''''War for Cybertron Trilogy'' Optimus Prime''' (DLX Scale, 2021)
**''Accessories:'' Ion Blaster, Energon Axe, Energon Shield, 5 pairs of hands, Action Stand
{{charstubtoys}}
{{-}}

===MDLX===
[[File:Threezero-MDLX-Optimus-Prime.jpg|thumb|upright]]
*'''Optimus Prime''' (2022)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)
:[[Threezero]]'s second figure for the MDLX line, this version of Optimus Prime is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Optimus Prime is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and accessories, namely his ion blaster, energon axe and Matrix of Leadership. He comes with a suite of hands in pairs: closed fists, splayed-out relaxed hands, and three different pairs meant to specifically hold each one of the aforementioned accessories. His chest is magnetically attached and as such can store the Matrix when not in use. Optimus also comes with his backpack piece disassembled in package.

:He was redecoed into [[Nemesis Prime (G1)#Threezero|Nemesis Prime]], [[Ultra Magnus (G1)/toys#Threezero|Ultra Magnus]], as well as his [[Optimus Prime (SG)#MDLX|''Shattered Glass'' self]].

:Optimus is [https://www.threezerohk.com/wp-content/uploads/2023/05/MDLX_Transformers_Starscream_17-768x512.jpg compatible] with [[Starscream (G1)/merchandise#Threezero|Starscream]] by way of the latter's wing assembly and head, in reference to "[[Megatron's Master Plan, Part 1]]".

::*''[https://www.threezerohk.com/product/transformers-mdlx-optimus-prime/ More information on MDLX Optimus Prime at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXNewYear}}
*'''Optimus Prime (Year of the Dragon Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:An all-gold {{W|Chinese New Year}} themed redeco of the above figure, featuring dragon patterns across his chest and left arm. According to the product description from Threezero, the right shoulder features the character for "Year of the Dragon" (龍), while his left shoulder features the fifth character (辰) of "Earthly Branches" in traditional Chinese sequencing (地支). Optimus features all the same accessories and functionality as before.

:This figure was limited to 1398 pieces worldwide, revealed in late 2023 and released in February 2024.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-year-of-the-dragon-edition/ More information on MDLX Optimus Prime (Year of the Dragon Edition) at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXVintage}}
*'''Optimus Prime (Vintage Animation Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:Yet another redeco of Prime, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

:Vintage Animation Edition Prime, [[Megatron (G1)/merchandise#MDLXVintage|Megatron]] and [[Bumblebee (G1)/merchandise#MDLXVintage|Bumblebee]] were revealed in a [https://newsroom.hasbro.com/news-releases/news-release-details/40-years-one-legacy-hasbro-celebrates-transformers-40th press release] from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-vintage-animation-edition/ More information on MDLX Optimus Prime (Vintage Animation Edition) at Threezero]
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXSleep}}
*'''Optimus Prime (Sleep Mode)''' (2025)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:A redeco of Prime in various shades of grey as a callback to his death in [[The Transformers: The Movie]]. All previous accessories and functionality carry over from before.

:This figure was revealed on Threezero's official website on February 2025.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-sleep-mode// More information on MDLX Optimus Prime (Sleep Mode) at Threezero]
{{MDLXOptimusPrimeMold}}

==Kidrobot==
[[File:Kidrobot GIJoe Enamel Pin Series.jpg|thumb|250px]]
===Enamel Pin Series===
*'''Optimus Prime''' ([[November 3]], [[2017]])
:*''Rarity:'' 1 in 20
:Released by [[Kidrobot]] in their Enamel Pin Series, this is a flat, enamel pin badge of Optimus Prime inspired by the art of [[Tom Scioli]]'s ''[[Transformers vs. G.I. Joe]]'', albeit with [[Super deformed|cutesy proportions]]. The pin series was [[Blindpacking|blindboxed]], with some pins being rarer than others.
{{--}}

===Vinyl Mini Series===
[[File:Kidrobot GI Joe Optimus Prime mini.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[November 14]], [[2017]])
:*''Rarity:'' 2 in 24
:*''Accessories'': Sword
:The same character design was reused for the Vinyl Mini Series, with Optimus receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. Optimus featured articulation in each shoulder, and also included his [[Minecraft]] voxel sword as first seen in "[[Everybody Hates Metroplex]]".
{{-}}

{{anchor|kidrobotgid}}
[[File:Kidrobot GI Joe Optimus Prime GID mini.jpg|thumb|upright=1]]
*'''Optimus Prime GID''' ([[November 14]], [[2017]])
:*''Rarity:'' 1 in 48
:*''Accessories'': Sword
:Optimus's Vinyl Mini figure was redecoed into "Optimus Prime GID", sharing many of the same paint applications, but now cast entirely out of glow in the dark plastic, more closely representing his apparition to [[Scarlett]] in "[[Headmasters (issue)|Headmasters]]" or his resurrection in "[[The War Never Ends]]". He was one of the rarer, but not the rarest, of the Vinyl Mini Series. His sword is still included.
{{-}}

===Vinyl Keychain Series===
[[File:Kidrobot GI Joe Optimus Prime keychain.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[December 1]], [[2017]])
:*''Rarity:'' 3 in 24
:Optimus was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation. His sword is also absent.
{{-}}

==Bouncing Ball Heads==
[[File:BouncingBallHead OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2017)
:"Bouncing Ball Head" Optimus Prime is a small, super deformed figurine with a removable head that doubles as a bouncy ball. An Autobot logo is tampographed on the back of his head and his name is written under his feet.

:He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique red color.

:Despite clearly representing Generation 1 characters, the collection is advertised as a 2015 ''[[Transformers: Robots in Disguise (2015 franchise)|Robots in Disguise]]'' product.
{{-}}

==Imaginarium Art==
[[File:ImaginariumOptimusPrime.jpg|upright=1.66|thumb|Brings new meaning to "no matter the cost."]]
*'''Optimus Prime''' (2017)

:[[Imaginarium Art]]'s first statue of Optimus Prime stands 24 inches tall and features multiple [[Light-emitting diode|LED]]s, two varieties of his laser rifle, and his energy axe. The statue's chestplate can open, revealing the Matrix of Leadership.

:The sculpted base for this figure also features the Combat Deck and Roller. Only 500 of this item were produced.
{{-}}

*'''Optimus Prime''' (2018)

:The "Legacy of Cybertron" statue is 12 inches tall, and its base can be connected to other statues in that series to produce a larger battle scene. 600 were produced.
{{-}}

==''Keshi Surprise''==
*'''Autobots''' (2018)

:The ''[[Keshi Surprise]]'' series by [[Super7]] consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980s [[Decoy (G1)|Decoy]]s. These [[blindpacking|blind-packed]] figures were sold individually or in cases depicting only their faction. Optimus Prime was available in red, yellow, blue, and purple, and included a foil trading card / sticker.
{{-}}
==Forever Clever==
{{anchor|Jumbochalk}}
*'''4 Pack Jumbo Chalk Set''' (2018)
:Released by [[Forever Clever]], the 4 Pack Jumbo Chalk Set includes a chalk holder featuring Optimus Prime. He's bundled with chalk holders of [[Megatron (G1)/merchandise#Jumbochalk|Megatron]], [[Bumblebee (G1)/merchandise#Jumbochalk|Bumblebee]] and [[Soundwave (G1)/merchandise#Jumbochalk|Soundwave]], and 4 pieces of appropriately colored chalk.
{{anchor|shapechalk}}
*'''5 Pack Shaped Chalk''' (2019)
:A piece of blue chalk formed into the shape of Optimus Prime. Bundled with [[Megatron (G1)/merchandise#shapechalk|Megatron]], [[Bumblebee (G1)/merchandise#shapechalk|Bumblebee]], [[Starscream (G1)/merchandise#shapechalk|Starscream]] and [[Windblade (G1)#shapechalk|Windblade]].
{{anchor|WallWalker}}
*'''Wall Walkers Optimus Prime''' (2018)
:Exclusively released in [[Blindpacking|blind bags]], ''Wall Walkers'' Optimus Prime has suction cups on its hands and feet so it can stick to walls. All its details are printed on, and besides its colors and printing, it is identical to the other Wall Walkers toys.
{{anchor|MiniWalker}}
[[File:MysteryMiniWalkers.jpg|upright=1|thumb]]
*'''Mystery Mini Walkers Optimus Prime''' (2021)
:Also a blind bag exclusive, ''Mystery Mini Walkers'' Optimus Prime is an eraser-like figure with movable arms and legs and printed-on details.
{{-}}
{{anchor|PBRoptimus}}
[[File:TF Authentics 2023 Pull-Back Racers Optimus Prime.jpg|upright=1|thumb|Up top!]]
*'''Pull-Back Racers Optimus Prime''' ([[2023]])
:This toy is a non-transforming rendition of Optimus Prime in a super-deformed rendition of his vehicle mode, albeit with his robot mode head and left arm sticking out of it. As the title suggests, this toy has a pull-back motor that will propel the toy forwards after being pulled back considerably enough.
{{-}}
{{anchor|ClipCharms}}
[[File:ForeverCleverClipCharms.jpg|upright=1|thumb]]
*'''Clip Charms Optimus Prime''' (2024)
:Released in blind bags, ''Clip Charms'' features a keychain of Optimus Prime's face with his name written beside it.
{{-}}
{{anchor|KeyBlasters}}
*'''Key Blasters''' (2024)
:A toy car released as part of the ''Key Blasters'' series prominently features Optimus Prime on its side and hood, with his name written on top in [[Alphabet#Autobot_script|Ancient Autobot]] script. A key is included. When it is inserted into the car, pushing the button on the key will propel the car forward. It was sold in a two-pack with a [[Starscream (G1)/merchandise#KeyBlasters|Starscream]] themed car.

===Squeezelings===
*'''Optimus Prime''' (Series 1, 2022)
:''[[Squeezelings]]'' Optimus Prime is a [[super deformed]], non-posable figure made of soft plastic and holding his ion blaster, released by [[Forever Clever]]. He was released in [[blindpacking|blind bags]] and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

{{-}}{{anchor|SqueezelingsBlackout}}
*'''Blackout Color Mode Optimus Prime''' (2022)
:A [[black redeco]] of the previous Optimus Prime figure. It was exclusive to an 8-figure gift set, featuring [[Optimus Prime (G1)/merchandise#Squeezelings|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings|Bumblebee]], [[Starscream (G1)/merchandise#Squeezelings|Starscream]], [[Megatron (G1)/merchandise#Squeezelings|Megatron]], and Blackout Color Mode versions of the three other characters.

{{-}}{{anchor|Squeezelings2}}
*'''Optimus Prime''' (Series 2, 2023)

:A figure of Optimus Prime in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongside [[Bumblebee (G1)/merchandise#Squeezelings2|Bumblebee]], [[Megatron (G1)/merchandise#Squeezelings2|Megatron]] and [[Optimus Primal (BW)/toys#Squeezelings|Optimus Primal]], in blind bags, or on blister card individually. It was later rereleased as part of the Squeezelings Sidekicks line, bundled with a comic book.

==''Transformers Trading Card Game''==
[[File:W1SOptimusPrimeAL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Autobot Leader''' (2018)
**'''Wave 1S: Starter Set'''
**''Rarity: '''''RT'''
**''Card Number: '''''T03/T04'''
**''Stars: ''7
:Optimus Prime, Autobot Leader is one of four double-sided character cards available in the ''[[Transformers Trading Card Game]]'' Starter Set.

:The artwork for the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile card game.
{{-}}
[[File:W1OptimusPrimeBL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2018)
**'''Wave 1'''
**''Rarity: '''''RT'''
**''Card Number: '''''T29/T40'''
**''Stars: ''13
:Optimus Prime, Battlefield Legend is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The card's Bot Mode line-art was done by [[Guido Guidi]], and Alt Mode line-art by [[Marcelo Matere]] and Alt Mode colors by [[Sara Pitre-Durocher]].

{{-}}
[[File:W1OptimusPrimeFF.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Freedom Fighter''' (2018)
**'''Wave 1'''
**''Rarity: '''''CT'''
**''Card Number: '''''T30/T40'''
**''Stars: ''12
:Optimus Prime, Freedom Fighter is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The Alt Mode artwork on the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile game, while the Bot-mode features line-art by [[Marcelo Matere]] and colors by [[Sara Pitre-Durocher]].
{{-}}
[[File:W2OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Gleaming Commander''' (2019)
**'''Wave 2: Rise of the Combiners'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''11

:Optimus Prime, Gleaming Commander was released as part of the ''[[Transformers Trading Card Game]]'' Wave 2: Rise of the Combiners. Like all other members of [[combiner]] teams released in the set, This version of Optimus Prime is a folding card, with the Bot and Alt modes being depicted when the card is folded in half, and a holofoil portion of the the combined mode depicted when unfolded. The reverse of Optimus Prime, Gleaming Commander depicts the center right portion of [[Optimus Maximus (G1)|Optimus Maximus']], of whom Optimus Prime forms the torso and head.

:The artwork for Bot Mode is reused from the [[Combiner Wars (franchise)|Combiner Wars]] Battle Core Optimus Prime toy's packaging art.

:Optimus Prime, Gleaming Commander can be used to form Optimus Maximus, Ultimate Defender with the use of the Action card [[Enigma of Combination|Sentinel Enigma]] while he and the other Wave 2 Sentinels are in Bot mode on the battlefield and/or KO area.
{{-}}
[[File:W3GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Infantry-Leader''' (2019)
**'''Wave 3: War for Cybertron: Siege I'''
**''Rarity: '''''RT'''
**''Card Number: '''''T07/T48'''
**''Stars: ''11
:General Optimus Prime, Infantry-Leader is one of forty-eight double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege I.

:The card's artwork is based on the ''[[War for Cybertron: Siege|Siege]]'' Voyager-class Optimus Prime toy, with the Bot Mode artwork being reused from the toy's packaging art.
{{-}}
[[File:W4GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Galactic Commander''' (2019)
**'''Wave 4: War for Cybertron: Siege II'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T06/T52'''
**''Stars: ''15

:General Optimus Prime, Galactic Commander is one of fifty-two double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege II.

:The card's artwork is based on the ''Siege'' Leader-class Galaxy Upgrade Optimus Prime toy, which in turn is based on the ''[[Transformers: Cybertron (franchise)|Cybertron]]'' version of Optimus Prime. The Bot Mode artwork is reused from said toy's packaging art, while Alt Mode received new art (lines by [[Marcelo Matere]] and colors by [[Volta]]).
{{-}}
[[File:EEOptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2019)
**'''Wave 1: Energon Edition'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T205/T06'''
**''Stars: ''13

:Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Optimus Prime, Battlefield Legend. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art by [[Marcelo Matere]]
{{-}}
[[File:W5OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Legendary Warrior''' (2020)
**'''Wave 5: Titan Masters Attack'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''12

:Optimus Prime, Legendary Warrior is one of forty-six double sided character cards released as part of Wave 5 of the ''[[Transformers Trading Card Game]]'', Titans Masters Attack. As a character with a body mode, Optimus Prime begins the game with a Titan Master attached in head mode. Once Optimus Prime is KO'd, said Titan Master is deployed.

:The card's artwork is based on the ''Titans Return'' Leader-class Powermaster Optimus Prime toy, with the body mode artwork being reused from the toy's packaging art.

:This card's set was originally set for an April 2020 release, however due to the global COVID-19 pandemic the release was pushed back to May 29, 2020.
{{-}}

==''Magic: The Gathering''==
[[File:MTG-Optimus-Inspiring-Leader.jpg|thumb|upright=1.66|Go ahead, turn me to my other face, see the rules nightmare that happens.]]
*'''Optimus Prime, Inspiring Leader''' (2018)
**''ID number:'' '''002/004'''
**''Set code:'' '''H18'''
**''Color identity:'' '''Red/White'''
**''Casting cost:'' '''{3}{R}{W}'''
**''Artist:'' [[Steve Argyle]]
:Part of the ''[[mtg:Heroes of the Realm|Heroes of the Realm]]'' series of commemorative cards, made by Wizards of the Coast for their employees as rewards for work on specific projects,<ref>[https://www.youtube.com/watch?v=4WNBRWoHq9E Gavin Verhey from Wizards of the Coast explains Heroes of the Realm]</ref> the 2018 "Optimus Prime, Inspiring Leader" card was given to the team behind the ''[[Transformers Trading Card Game]]''. Uniquely, Optimus Prime is "triple-faced" card: a ''Magic'' card on the front side, a ''Transformers Trading Card Game'' card representing Optimus in his alternate mode on the opposite side, and an oversized ''Transformers Trading Card Game'' card representing Optimus in robot mode found by unfolding the card.
:Optimus has the ability to change any permanent (card on the battlefield) to its other face, though sadly that doesn't mean he could convert ''himself'' into a ''Transformers Trading Card Game'' card during a ''Magic: The Gathering'' game.<ref>[https://www.reddit.com/r/magicTCG/comments/e5ovx5/heroes_of_the_realm_promo_optimus_prime_inspiring/ Post by u/Wizards_Drew] on [https://www.reddit.com/r/magicTCG/ r/magicTCG] on Reddit</ref>
:As with all ''Heroes of the Realm'' cards, "Optimus Prime, Inspiring Leader" is not legal to play in any format beyond a specific Commander rule; the cards are novelties designed to be read, rather than played.<ref>[https://markrosewater.tumblr.com/post/189543247703/hi-mark-i-have-2-questions-1-what-are-the Mark Rosewater on Tumblr]: "There’s no plans to release the Heroes of the Realm. The cards aren’t designed to be played. They’re designed to be read."</ref>
{{-}}
{{anchor|MTGHero}}
[[File:MTG-Optimus-Prime.jpg|thumb|upright=1.66|Transform and tap out!]]
*'''Optimus Prime, Hero / Optimus Prime, Autobot Leader''' (2022)
**''ID number:'' '''013/015'''
**''Set code:'' '''BOT'''
**''Color identity:'' '''Blue/Red/White'''
**''Casting cost:'' '''{3}{U}{R}{W}''' (front), '''{2}{R}{W}{B}''' (back with "More Than Meets the Eye")

:"Optimus Prime, Hero" is part of the 2022 ''[[Magic: The Gathering]]'' ''[[mtg:Universes Beyond|Universes Beyond]]'' ''[[mtg:Transformers|Transformers]]'' card set, found in Set Booster and Collector Booster packs of ''Magic''<nowiki>'s</nowiki> ''[[mtg:The Brothers' War|The Brothers' War]]'' set. It can be reversed to become "Optimus Prime, Autobot Leader", representing Optimus in vehicle mode. True to his character, he supports his allies with the "Bolster" mechanic and can return to the battlefield should he [[The many deaths of Optimus Prime|die]] in his Artifact Creature form.
:A variant of this card was available solely in Collector Booster packs, depicting [[Optimus Prime (SG)#Magic: The Gathering|''Shattered Glass'' Optimus Prime]].
{{-}}
{{anchor|MTGSLD}}
[[File:MTG-SLD-Optimus.jpg|thumb|upright=1.66|[[w:Golem|On sale just in time for Hanukkah]].]]
*'''Optimus Prime''' ''(Darksteel Colossus)'' (2022)
**''ID number:'' '''1081'''
**''Set code:'' '''SLD'''
**''Color identity:'' '''Colorless'''
**''Casting cost:'' '''{11}'''

:"Optimus Prime" is part of the ''[[Magic: The Gathering]]'' card pack ''Transformers: Optimus Prime vs. Megatron'', part of the ''[[mtg:Secret Lair|Secret Lair Drop Series]]'' ''[[mtg:Secret Lair Drop Series: December Superdrop 2022|December Superdrop 2022]]'' set. It was available exclusively from [https://secretlair.wizards.com secretlair.wizards.com] from [[December 5]], [[2022]] through [[January 6]], [[2023]].
:Optimus Prime is a [[mtg:Skinned card|reskin]] of the existing ''Magic'' card [https://scryfall.com/card/dst/109/darksteel-colossus Darksteel Colossus], using the same rules and counting as it for all gameplay purposes. Befitting the mighty leader of the Autobots, Optimus is incredibly powerful and impossible to destroy normally, but consequently has a very high casting cost. While the card has printing on both faces, depicting Optimus in robot mode and vehicle mode respectively, both have the same printed abilities and count as a single card for rules purposes—just choose which side you want to display when he enters the battlefield.
: The ''Optimus Prime vs. Megatron'' set also includes [[Megatron (G1)/merchandise#MTGSLD|Megatron]], [[AllSpark#Magic: The Gathering|The AllSpark]], and the bonus card [[Cybertron (planet)|Cybertron]].

{{--}}

==Flame Toys==

===Kuro Kara Kuri===
[[File:FlameToys-KuroKaraKuri-04-OptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (December 2019)
**''Number:'' '''04'''
**''Accessories:'' Large sword, stone, Swords (2), Large axe, Small axe (2), Ion cannon, pairs of hands (5), additional faces (2), Big Turbo Jet Axe with set of hands (exclusive),
**''Sculptor'': Chemical Attack
**''Painting'': Decomas Lab (Hiroyuki Hirose]

:Part of [[Flame Toys]]' ''Kuro Kara Kuri'' line of high-end, non-transforming action figures, Optimus Prime is an original design, though one that bears many similarities to the Don Figueroa design from [[IDW Publishing|IDW's]] ''The Transformers'' vol. 1. He has lots of die cast and LEDs in his head, chest matrix chamber, and both knees. He comes with a multitude of accessories, including a very large sword that can be plugged into a stone, two smaller swords resembling handheld versions of those used by the [[Optimus Prime (Movie)|live-action movie Optimus Prime]], a pair of hatchets resembling those of [[Optimus Prime (Animated)|''Animated'' Optimus Prime]], and of course G1 Optimus Prime's iconic Ion cannon. He also comes with an Orion Pax visorless alternative face, a battle damaged addition face, and five alternative pairs of hands in different poses.
:If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a very large Turbo Jet Axe.
:The reissue (which is labelled as such on the box) uses a slightly different red paint and is the recommended release for use with the Jet Power Armor (see below) due to the paint's extra durability.

{{-}}{{anchor|FlameToysBlackJetPower}}
[[File:FlameToys-KuroKaraKuri-OptimusPrimeJetPowerArmor.jpg|upright=1.66|thumb|And you thought the previous figure was expensive...]]

*'''Optimus Prime Jet Power Armor''' (January [[2024]])
**''Number:'' '''13'''
**''Accessories:'' ''everything...'', Blaster Cannon (exclusive)
**''Sculptor'': Chemical Attack
**''Coloring'': Masashi Watanabe

:Optimus Prime Jet Power Armor is a collection of 23 armour pieces that combine with the previously released ''Kuro Kara Kuri'' Optimus Prime similar to how he combined with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]'' which doubles the size of the figure. If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a blaster cannon.
:As mentioned above, due to addition paint durability, it is recommended to use the re-release of Optimus Prime.

{{-}}

===Furai Model===
[[File:FlameToys-FuraiModel-01-OptimusPrimeAttackMode.jpg|upright=1.66|thumb|'''''X-treme!''''']]
*'''Optimus Prime (Attack Mode)''' (September 2018)
**''Number:'' '''01'''
**''Accessories:'' Ion cannon, axe, 4 hands
{{toydesigner|[[Akira Amemiya]] (concept artist)}}

:Released as part of the ''Furai Model'' line by [[Flame Toys]], "Optimus Prime (Attack Mode)" is an articulated, non-transforming, Voyager Class-sized {{w|Gunpla}}-style model kit. Using parts made of hard ABS plastic and some polycaps, Optimus Prime (Attack Mode) is an original design created by Flame Toys in collaboration with [[Akira Amemiya]] of [[Studio Trigger]].

:For straight-assembly builders, Optimus Prime features a sheet of foil stickers for detail (notably the shoulder insignias), though the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers like ''Gundam Markers'' can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.

:This model kit was later [[redeco]]ed as [[Nemesis Prime (G1)#Flame Toys|Nemesis Prime (Attack Mode)]] and [[Optimus Prime (SG)#Flame Toys|Shattered Glass Optimus Prime (Attack Mode)]].

{{-}}{{anchor|Furai03}}
[[File:FlameToys-FuraiModel-03-OptimusPrimeIDW.jpg|upright=1.66|thumb]]
*'''Optimus Prime (IDW ver.)''' (March 2019)
**''Number:'' '''03'''
**''Accessories:'' Ion cannon, 4 hands
:Optimus Prime (IDW) is a plastic model kit based off of the Optimus Prime design created by [[Don Figueroa]] for [[IDW Publishing]]'s [[The Transformers (IDW)|2009-2011 ''The Transformers'' comic series]]. Similarly to the previous model kit, IDW Optimus is also Voyager-sized.
:This model kit was later redecoed as [[Nemesis Prime (G1)#Furai08|Nemesis Prime (IDW ver.)]] and [[Ultra Magnus (G1)/merchandise#Flame Toys|Ultra Magnus (IDW ver.)]], and it's also used to make the pre-built Furai Action figure (see below.)

{{-}}{{anchor|Furai12}}
[[File:FuraiG1Optimus.jpg|upright=1.66|thumb]]
*'''Optimus Prime (G1 ver.)''' (April 2020)
**''Number:'' '''12'''
**''Accessories:'' Ion cannon, 10 hands, axe
:Optimus Prime (G1) is another plastic model kit, this time a heavily stylized rendition of his cartoon appearance. Like the previous releases, he stands at an approximate Voyager height. He features opening chest windows which reveal sculpted detail of the [[Matrix of Leadership]].

{{-}}{{anchor|Furai16}}
*'''Optimus Prime IDW (Clear ver.)''' (August 2020)
**''Number:'' '''16'''
{{toystub}}

{{-}}
*'''Optimus Prime''' (20??)
:Part of the ''"Deformer Model Kit"'' subline of the ''Furai Model'' line, this Optimus Prime model is a cutesy, "[[super deformed]]" take on the Autobot leader.
{{comingsoontoy}}

===Furai Action===
[[File:FlameToys-FuraiAction-OptimusPrimeIDW.jpg|thumb|Just like one of those second-hand pre-built Gunplas you've seen in Akibahara!]]
*'''Optimus Prime (IDW ver.)''' (January 2020)
**''Accessories'': Ion cannon, 4 hands

:''Furai Action'' Optimus Prime is a pre-assembled redeco of the second ''Furai Model'' kit, with the weathering effects painted on.

{{-}}

==''Playskool Friends''==
[[File:Playskool-Friends-TF-Optimus-Prime.jpg|upright=1.88|thumb|A mouth on his mouthplate? That's a new one.]]
*'''Transformers Collector Pack''' (Canceled)

:Intended to be released as part of the 7-pack for the Playskool Friends lineup, this Optimus Prime is a very adorable non-transforming figurine. He was to come packed with Bumblebee, Arcee, and 4 Rescue Bots: Heatwave, Chase, Boulder and Blades.

:Given the inclusion of the four Rescue Bots, it was ''probably'' unclear if this Optimus Prime is meant to represent his ''Generation 1'' counterpart or his ''[[Optimus Prime (WFC)|Aligned]]'' counterpart.

{{canceledtoy}}

{{-}}

==''Uglydolls''==
[[File:Uglydolls plush collab.jpg|250px|thumb]]
*'''Ox as Optimus Prime''' (2018)
:A collaboration with ''[[Uglydolls]]'' for the 2018 San Diego Comic-Con, the character Ox is dressed as Optimus Prime. He is a limited run exclusive plush, along with Ice-Bat as [[Bumblebee (G1)/merchandise|Bumblebee]].
{{--}}

==McDonald's==
[[File:2018-McD-Authentics-Bumblebee-Optimus-Prime.jpg|250px|thumb]]
*'''Optimus Prime with a sword'''{{sic}} (Happy Meal Toy, 2018)
:Released as part of the [[McDonald's]] June 2018 Happy Meal Toys along with [[My Little Pony]], this Optimus Prime is a super-deformed figurine, and he features a gimmick on his left arm, which can be swung down to reveal a pop-out sword with the press of a button on his back. The sword can be retracted manually by raising the arm.

:The toy was available in South Korea, Italy, Russia, and Malaysia. This toy was rereleased in the US as [[Optimus Prime (Movie)/merchandise#McDonald's 2|Optimus Prime]] for the ''[[Bumblebee (franchise)|Bumblebee]]'' promotion. In Malaysia, this toy is one of the few items that can be found in several hobby toy shops.

{{-}}

==Jada Toys==
===''Metals Die Cast / Hollywood Rides''===
[[File:JadaHollywoodRidesG1OptimusPrime1-24.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2018)
:Released by [[Jada Toys]], this 1/24 scaled non-transforming die-cast truck with rubber tires is based on Optimus Prime's original form and features opening doors to reveal a highly detailed interior with a chromed steering wheel. Similar to the ''[[Robot Powered Machines#Mini-Vehicles|Robot Powered Machines]]'', the truck features a sculpted robot mode underneath. His smokestacks are ''insanely'' long.

:This mold was later redecoed as [[Nemesis Prime (G1)#Jada Toys|Nemesis Prime]].

{{-}}{{anchor|Jada1-32}}
[[File:JadaHollywoodRidesG1OptimusPrime1-32.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2018)
:A medium-sized replica of Optimus Prime much similar to the version above, but with shortened smokestacks. Unlike most other 1/32 vehicles, Optimus does not feature any opening doors, but still retains the sculpted robot mode on his chassis.

{{-}}{{anchor|JadaOP3pack}}
[[File:Jada 1-32 Optimus Prime 3pk.jpg|upright=1.44|thumb]]
*'''Western Star 5700XE Optimus Prime / Optimus Prime / Autobot Optimus Prime''' (Scale 1/32 Die Cast Vehicle 3‑pack, 2022)
:The 1/32 version of Generation 1 Optimus Prime was rereleased in a 3-pack alongside his [[Optimus Prime (Movie)/merchandise#JadaOP3pack|2007 and ''The Last Knight'']] counterparts, neither featuring any notable changes.

{{-}}{{anchor|JadaGhost124}}
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2024)
:A redeco of the 1/24 scaled replica above, this Optimus Prime was released in a crossover with the ''[[Ghostbusters]]'' franchise and is mostly based on the [[Optimus Prime (G1)/Generations toys#Collaborative|MP-10G Optimus Prime Ecto-35 Edition]] figure from the ''[[Transformers Collaborative|Collaborative]]'' toyline, itself based on the original [[Ecto-1]] color scheme, with the addition of some green ghost splatter between the front bumper and the left wheel. Instead of Autobot insignias, this version features the Ghostbusters logo on both sides and the back of the cab, as well as under the chassis right above his robot mode sculpture.

{{-}}{{anchor|JadaGhost132}}
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2024)
:This version of Optimus Prime is a redeco of the 1/32 scaled replica in the same Ghostbusters-inspired deco of the 1/24 version above. The only noticeable difference in colors is the lack of green on its headlights.

===''Metalfigs''===
[[File:JadaMetalfigsG1OptimusPrime.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (4" Die Cast Figure, 2020)
**''Accessories'': Ion blaster, Energon-axe
:''Metalfigs'' Optimus Prime is a 4-inch tall non-transforming super deformed die-cast figure with three points of articulation and light-up eyes.

:He comes with his signature ion blaster and Energon-axe weapons as accessories.

{{-}}{{anchor|DioramaScene}}
[[File:JadaMetalfigsG1DioramaScene.jpg|upright=1.44|thumb]]
*'''Diorama Scene''' (2 3/4" Die Cast Figure 4-pack, 2020)
**''Accessories'': Display backdrop
:A static die-cast figurine of Optimus Prime measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongside [[Bumblebee (G1)/merchandise#DioramaScene|Bumblebee]], [[Starscream (G1)/merchandise#Jada Toys|Starscream]] and [[Megatron (G1)/merchandise#Jada Toys|Megatron]].

:The packaging backdrop can be used as an additional display piece for the set.

{{-}}{{anchor|Metalfigs4pack}}
*'''Optimus Prime / Bumblebee / Optimus Primal / Megatron''' (2 3/4" Die Cast Figure 4-pack, 2022)
:This static Optimus Prime figurine is directly designed after the 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongside [[Bumblebee (G1)/merchandise#Metalfigs4pack|Bumblebee]], [[Optimus Primal (BW)/toys#Metalfigs|Optimus Primal]] and [[Megatron (G1)/merchandise#Metalfigs4pack|Megatron]].

{{-}}{{anchor|Metalfigssingle}}
*'''Optimus Prime''' (2 3/4" Die Cast Figure, 2023)
:The same super deformed Optimus Prime from the 4-pack above is also available in individual packaging.
{{-}}

===''Nano Hollywood Rides''===
[[File:JadaNanoHollywoodRidesG13pack.jpg|upright=1.44|thumb]]
*'''Starscream / Volkswagen Beetle Bumblebee / Optimus Prime''' (1.65" Die Cast Vehicle 3-pack, 2020)
:''Nano Hollywood Rides'' Optimus Prime is a small non-transforming die-cast truck measuring approximately 1.65 inches long. He was released in a 3-pack alongside [[Starscream (G1)/merchandise#Nano Hollywood Rides|Starscream]] and [[Bumblebee (G1)/merchandise#Nano Hollywood Rides|Bumblebee]]. Unfortunately, he doesn't feature a sculpted robot mode underneath like most other Jada vehicles do.
{{-}}

===''Nano Metalfigs''===
[[File:JadaNanoMetalfigsG1-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 1 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:''Nano Metalfigs'' Series 1 Optimus Prime is an incredibly small die-cast figurine molded holding his blaster. He has a little base attached to his feet for balancing reasons.

:He comes in an impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]]. This mold was later redecoed as [[Nemesis Prime (G1)#Nano Metalfigs|Nemesis Prime]] in the Series 2 18-pack.

{{-}}{{anchor|NanoMetalfigs2}}
[[File:JadaNanoMetalfigsSeries2G1BW-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 2 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:A second ''Nano Metalfigs'' Optimus Prime was released in Series 2, now wielding his Energon axe instead of his blaster and doing a bit more of an action pose.

:He comes in ''another'' impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{-}}{{anchor|NanoMetalfigs3}}
*'''Transformers Series 3 18-pack''' (4 cm Die Cast Figure Multipack, 2023)
:For the [[Jada Toys#Nano Metalfigs|third ''Nano Metalfigs'' multipack]], two Optimus Primes were made available at once. One is a re-release of the axe-wielding Series 2 figurine with no noticeable changes, and the other is a golden redeco of the blaster-holding Series 1 figurine.
{{-}}

===Converting RC Vehicle===
[[File:JadaConvertingOptimusPrime.jpg|upright=1.44|thumb|"We have [[Optimus Prime (G1)/toys#Robosen Collector's Edition|Robosen's Optimus Prime]] at home."]]
*'''Optimus Prime Converting R/C''' (2022)
**''Accessories:'' Remote controller
:This Optimus Prime is a remote controlled figure capable of automatically converting between robot mode and truck mode on command.

:He measures approximately 13 inches tall in robot mode and 12 inches long in truck mode, and features lights, sounds and voices.

{{--}}

==''ReAction''==
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2020, 2024)}}</ul>
:*''Accessories'': Ion Blaster

: Released in [[Super7]]'s line of multi-property 3.75-inch action figures, ''[[Super7#ReAction|ReAction]]'' Optimus Prime was naturally part of the first wave of ''Transformers'' figures. It is a non-converting action figure with 5 points of articulation (simple swivel shoulders, legs, and neck) and an [[Ion blaster]] accessory he can only hold in his right hand.

: It should be noted that despite being a "retro-styled" figure, the hard-plastic points on his helmet are very accurate to the animation model and therefore ''incredibly'' pointy, like, "would not be allowed on a toy for the 5-13 set" pointy.

: As with all releases in the ''ReAction'' toyline, Optimus comes packaged in a small cardback that emulates the nostalgic packaging style of [[Kenner]] ''[[Star Wars (franchise)|Star Wars]]'' action figures of the late 1970s to early '80s.

: In late 2024, this figure was reissued with no obvious changes, now in a [[blindpacking|blindpacked]] box assortment.

{{-}}{{anchor|ReActionCyberchrome}}
<ul class="iconlist">{{Bp-a1|'''Cyberchrome Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: This version of the Optimus ''ReAction'' figure features glossy metallic paint. That's about it. Whee.

: This figure was a [[Target]] exclusive in the US, released alongside the "[[Megatron (G1)/merchandise#ReActionCyberchrome|Cyberchrome Megatron]]" figure.

{{-}}{{anchor|ReActionFallenWave4}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: Released in the fourth wave of ''ReAction'', this all-gray version of Optimus features a new torso tooling with open chest panels revealing a (non-removable) Matrix of Leadership.

: This is the first of ''three'' different figures of the same concept to be sold under the name "Fallen Leader Optimus Prime"; the other two (below) are [[Target]] exclusives.

: This figure was initially solicited to retailers as "Dead Optimus Prime" before the slightly gentler name change... but "Dead Optimus Prime" is still what the figure is labeled on the cardback checklist as of wave 6.

{{-}}{{anchor|ReActionSanta}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Christmas]]-themed redeco, "Optimus Santa" features a red and green color scheme, a tufted Santa cap, and his ion blaster is striped to resemble a candy cane.

: This figure is a "shared exclusive" between, multiple online outlets. The card still refers to him as just "Optimus Prime" (albeit in cursive on a gift tag), but the toy is listed as "Optimus Santa" on Super7's website, and "Optimus Prime Santa" on other sites.

{{-}}{{anchor|ReActionFallenTarget}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: This Target-exclusive version of the "Fallen Leader" concept is just the normal Optimus figure with the closed-up chest done in the grays of the initial "Fallen Leader" figure. Exciting! And clearance fodder!

: This figure was released alongside the "[[Megatron (G1)/merchandise#ReActionChromeCommander|Chrome Commander Megatron]]" figure.

{{-}}{{anchor|ReActionGolden}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The third [[Target]]-exclusive Optimus Prime figure, this one has a head-to-toe gold redeco, depicting his appearance in the end of "[[The Golden Lagoon (episode)|The Golden Lagoon]]".

: This figure was released alongside the similarly-decoed [[Megatron (G1)/merchandise#ReActionGolden|"Golden Lagoon" Megatron]] figure.

{{-}}{{anchor|ReActionFallenTargetColor}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The second Target-exclusive "Fallen Leader" version of Optimus, and the third "Fallen Leader" overall (kinda morbid, y'all), and ''fourth'' Target-exclusive Optimus (overkill much?), this is the open-chest version of Optimus in his normal "living" color scheme, now better depicting the Matrix transfer moment when Prime was still (barely) alive.

: This figure was released alongside the thematically-similar [[Megatron (G1)/merchandise#ReActionFallenEvolution|"Fallen Evolution" Megatron]] figure.

{{-}}{{anchor|ReActionOpHalloween}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Halloween]]-themed redeco of the standard Optimus figure, in orange and black. Pumpkinmus Prime.

: This figure was a "shared exclusive", sold through multiple online retailers. Online listings call it "Optimus Prime (Halloween)", but the actual card simply says "Optimus Prime".

<ul class="iconlist">{{Bp-a1|'''Nucleon Quest Optimus Prime''' (2024)}}</ul>
:*''Accessories'': Ion blaster

: Wave eight of ''ReAction'' saw this black redeco of Optimus Prime, inspired by the 2001 [[Optimus Prime (G1)/toys#NucleonQuest|Nucleon Quest Super Convoy]] figure.

{{-}}

*'''Ark Base''' (Playset, 2024)

:*''Accessories'': Ion blaster

: The ''ReAction'' Ark Base playset included a version of Optimus Prime with his chest windows painted to add simulated reflective detail.
{{comingsoontoy}}
{{-}}

==''R.E.D. [Robot Enhanced Design]''==
[[File:TF-R.E.D.-Optimus-Prime.jpg|upright=1.66|thumb|Armored Convoy not included.]]
*'''Optimus Prime''' (2020)
**''Accessories'': Ion Blaster, Energon Axe, [[Matrix of Leadership/toys#R.E.D. .5BRobot Enhanced Design.5D|Matrix of Leadership]], 4 alternate hands
{{toydesigner|[[Emiliano Santalucia]] (concept artist)}}

:Released as part of the first wave of the ''[[Transformers R.E.D.]]'' line, Optimus Prime is a non-transforming 6-inch action figure akin to the ones from Hasbro's ''[[Marvel Comics|Marvel]] Legends'' and ''[[Star Wars (franchise)|Star Wars]] The Black Series'' lines. He is highly articulated and features extensive paint operations for [[show-accuracy]].

:Optimus comes with six hands altogether: a pair of closed fists, a pair of gently beckoning hands, a right hand for his included [[Ion blaster|Ion Blaster]] accessory, and a right hand with the index finger extended. He also features an [[Energon-axe|Energon Axe]], compatible with either wrist in place of his hand. Lastly, he includes a Matrix of Leadership, which can store in his chest thanks to his opening windows.

:As with all ''R.E.D.'' toys, Optimus Prime was a Walmart exclusive in Canada and the United States, and was later made available on [[Hasbro Pulse]] in limited quantities.

: This mold was used to make ''R.E.D.'' [[Ultra Magnus (G1)/merchandise#R.E.D. .5BRobot Enhanced Design.5D|Ultra Magnus]].
{{-}}

==''Super Cyborg''==
[[File:SuperCyborgOptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (2018)
**''Accessories'': Ion blaster, torso plate

:''Super Cyborg'' Optimus Prime is an 11-inch-tall non-transforming figure with 7 points of articulation. Its main distinguishing feature is that the entire front of the robot torso is removable, exposing not just the expected Matrix of Leadership but also many other sculpted mechanical details within Prime's body.

*'''Optimus Prime (clear)''' (2018)
**''Accessories'': Ion blaster, torso plate

:The transparent plastic version of this figure was exclusive to [[San Diego Comic-Con]] 2018.

*'''Optimus Prime (Dead)''' (2018)
**''Accessories'': Ion blaster, torso plate

:This dark grey version was exclusive to [[New York Comic Con]] 2018.

*'''Optimus Prime (Clear Red / Blue)''' (2023)
**''Accessories'': Ion blaster, torso plate

:This translucent version was exclusive to New York Comic Con 2023.
{{-}}

==Figural Bag Clip==
[[File:FiguralBagClip OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2020)
:Released by [[Monogram]], this 2.5" 3D foam bag clip takes the form of a chibi Optimus Prime.

:It was available only as part of a [[Blindpacking|mystery blind bag]] collection.
{{-}}
[[File:FiguralBagClip 2021 Optimus.JPG|thumb]]
*'''Optimus Prime''' (2021)
:A non-articulated, non-transforming 3" figure of Optimus Prime with an attached clip, also released by Monogram.

:Unlike the previous year's release it was sold on a standard cardback.

{{-}}

==D'elicce==
{{note|All Easter eggs listed below were exclusive to Lojas Americanas, a popular Brazilian chain store.}}
[[File:Brazilian Transformers Easter Eggs 2021.jpg|250px|thumb]]
*'''Transformers Easter egg''' (90g, 2021)
:In 2021, [[Brazil]]ian chocolate manufacturer Top Cau, under its kid-focused branch D'elicce, released a pair of ''Transformers''-themed [[Easter]] eggs that included a popcorn bucket of [[super deformed|cutesy proportions]] based on either Optimus Prime or Bumblebee.

{{-}}{{anchor|delicce2025}}
[[File:Brazilian Optimus Prime Easter Egg 2025.jpg|thumb|250px]]
*'''''Transformers'' Easter egg''' (90g, 2025)
:In 2025, D'elicce (or rather "Delice" as its spelled in some parts of this product) released an Optimus Prime-themed egg that came with a single piece of red plastic molded after the character's evergreen truck mode with trailer attached, inside of which the egg comes stored. Unfortunately, it means that not even his wheels can roll.

:The toy comes with a stickersheet that must be applied manually and is not packaged with pre-applied stickers as shown in the official stock photos.

{{-}}

==''Minimates''==
*'''Optimus Prime''' (Series 1, 2021)
**''Accessories'': Laser rifle, energy axe, stand

:Part of the first wave of Transformers [[Minimates]] from Diamond Select, this Optimus Prime is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. The Matrix of Leadership is printed on the Minimate figure's chest and is visible through the windows on the chest covering. Due to their small size, all 4 figures in each series are sold in the same blister card.

*'''VHS Minimates Box Set''' (2022)

:''Minimates'' Optimus Prime was rereleased as part of a [[San Diego Comic-Con]] 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles a [[Family Home Entertainment]] VHS tape. Only 2500 of this set were produced.
{{-}}

*'''Stasis Lock Optimus Prime''' (2023)
:Another San Diego Comic-Con brought another VHS-cassette-themed ''Minimates'' 4-pack exclusive, with another redeco of Optimus Prime - this time depicting him in "stasis lock" (meaning his grey dead color scheme, now with an opening empty chest compartment). Only 1500 of this set were produced.
{{-}}

==''ULTIMATES!''==
[[File:Super7 Ultimates Optimus Prime (G1).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion blaster, energon axe, Matrix of Leadership, surfboard, jetpack, basketball, energy restraints, left & right fists, 2 open hands, right gripping hand, left pointing hand, alternate head

: Part of the first wave of ''[[Super7#Transformers ULTIMATES!|Transformers ULTIMATES!]]'' from [[Super7]], Optimus Prime is a 7-inch-tall action figure based on his cartoon model. He features multi-directional joints at the neck, shoulders, wrists, hips, and ankles; plus swivel biceps, elbows, knees, and a bit of ab crunch. His hands pop out at the wrists so they can be replaced with his additional spare hands in different poses (or the obligatory Energon Axe), and his head can be replaced with an alternate based on the original Optimus toy.

: He also features a ''lot'' of accessories, more than any other toy in the wave, including a number of episode-specific ones: [[Sideswipe (G1)|Sideswipe's]] jetpack from "[[More than Meets the Eye, Part 3]]", a ridable surfboard from "[[The Ultimate Doom, Part 3]]", energy restraints from "[[S.O.S. Dinobots]]", and his giant basketball from "[[The Master Builders (episode)|The Master Builders]]". He also includes a miniature [[Spike Witwicky (G1)#ULTIMATES!|Spike Witwicky]] figurine.

: Preorders for Optimus Prime (and the rest of Wave 1) opened on [[January 29]] 2021, and closed on [[February 28]], with the toys purportedly shipping in winter of that year but not actually arriving until May 2022.

{{-}}{{anchor|Alligaticon}}
[[File:Ultimates Alligaticon.jpg|upright=1.66|thumb]]
<ul class="iconlist">{{Bp-d1|'''Alligaticon''' (2022)}}</ul>
:*''Accessories'': Optimus Prime head; Optimus Prime rifle; Decepticon tower tip w/ arm; [[Battle taxi]]

: Part of the third wave of ''ULTIMATES!'', the [[Alligaticon#Merchandise|Alligaticon]] is a 10-inch-long non-transforming figure made to emulate the the Optimus-parts creature's cartoon model to pretty exacting detail (including the ''lack'' of detail on most of its flat surfaces). It makes ample use of multi-swivel joints to give its limbs a relatively wide range of motion, plus extensive tail jointing, a mid-body bend, some neck waggle, and an opening jaw.

: It comes with multiple "[[City of Steel (episode)|City of Steel]]"-themed accessories, including a tower with Optimus's arm attached to it. The arm is permanently attached, but the hand uses the same wrist-joint as the individual Optimus figure, and can be popped off and replaced with his other hands if you like (Optimus's wrist-pegs are larger than many other figures', so sadly cross-compatibility is limited at best). Curiously, while the arm appears to be identical to the prior figure's arm, the gun is not, having a trigger guard the original version lacks.

: It also comes with Optimus's disembodied head on a ball-jointed "neck" with trailing wires. Like the arm, the head is the same mold as the original Optimus, but this time cast in clear-blue plastic painted over, with a small gap in the back of the head to attempt [[light-piping]]... but depending on the strength of the light, it might just shine through the paint. Since it's the same mold, one could theoretically swap it out, but trying to push that wire-mass back into the socket seems like it'd be a bit of a pain in the neck (wocka wocka!).

: Preorders for the Alligaticon (and the rest of Wave 3) opened on [[December 1]], 2021, with the toys projected to ship in fall 2022... and ''actually'' shipping in November 202''3''.

{{-}}{{anchor|Ultimates2}}
[[File:Super7 Ultimates Optimus Prime (Fallen Leader).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Fallen Leader)''' (2023)}}</ul>
:*''Accessories'': 2 fists, 2 open hands, 2 Matrix-grip hands, trigger-grip right hand, Matrix of Leadership, Matrix cover, ion blaster

: This retool and redeco of ''ULTIMATES!'' Optimus Prime is the latest of several representations of his dead body from "[[The Transformers: The Movie]]," now with a greyscale paint scheme, a heavily damaged left torso section, and cracks all over him (and on his rifle too for good measure). His chest is redesigned to allow it to open and reveal the Matrix.

: Preorders opened in June 2022, with the expectation that of figures shipping in May 2023.... but actually January 2024
{{-}}

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': ion blaster

: The original ''ULTIMATES!'' Optimus Prime was repackaged as a "Transformers Deluxe" figure, physically identical to the first release but now lacking all accessories except the gun. Its new packaging resembles a VHS clamshell box; specifically, the colors and trade dress strongly resemble the [[Video Gems]] tapes, while the character artwork and subtitle are taken directly from the [[The Original Transformers|Kid Rhino]] tapes.

: This piece was exclusive to, of all things, Macy's.

==''Pop!''==
[[File:Funko Pop Optimus Prime G1.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:Released as part of the ''Pop! Retro Toys'' segment, [[Funko Pop!|Funko]]'s ''Pop!'' Optimus Prime is a super deformed vinyl figure based on his original Generation 1 toy, though his eyes are painted blue like in the cartoon.

:This mold was later redecoed as [[Nemesis Prime (G1)#Pop!|Nemesis Prime]].

{{-}}{{anchor|PopMetallic}}
[[File:Funko Pop Amazon Metallic Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:An [[Amazon (website)|Amazon]] exclusive redeco of the figure above, this version of Optimus Prime features a more metallic paintjob.

{{-}}{{anchor|PopGIJoe}}
[[File:Funko Pop Mystery Box Optimus Prime Cobra Commander.jpg|thumb|upright=1.44]]
*'''Funko Mystery Box: Transformers vs. G.I. Joe''' (Giftset, 2021)
**''ID number:'' '''44'''

:Available only as part of a GameStop exclusive giftset, this retooled Optimus Prime comes with his Energon axe attached to his right hand instead of his ion blaster and comes [[Blindpacking|blindpacked]] inside a ''Transformers vs. [[G.I. Joe (franchise)|G.I. Joe]]''-themed lunch box alongside a ''Pop!'' [[Cobra Commander#Pop!|Cobra Commander]] figure, a Decepticon logo decal, a Cobra logo keychain, and a set of four pins of Optimus Prime, Cobra Commander, [[Megatron (G1)/merchandise#Pop!|Megatron]] and [[Duke (G.I. Joe)#Pop!|Duke]].

{{-}}{{anchor|PopJumbo}}
[[File:Funko Pop Jumbo 10-inch Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (Jumbo size, 2021)
**''ID number:'' '''71'''

:A larger version of the regular ''Pop!'' Optimus Prime measuring 10-inches tall.

{{-}}{{anchor|PopKeychain}}
[[File:Funko Pocket Pop Keychain Optimus Prime.jpg|thumb|upright=1.11]]
*'''Optimus Prime''' (Pocket ''Pop!'' Keychain, 2021)

:A smaller version of the regular ''Pop!'' Optimus Prime with a keychain attached to his head.

{{-}}{{anchor|Digital Pop!}}
*'''Optimus Prime''' ([[Funko Pop!#Digital Pop! NFTs|Digital ''Pop!'']], 2022)
**''Rarity:''
***''Monochrome:'' '''Common'''
***''Static:'' '''Common'''
***''Glowing:'' '''Uncommon'''
***''Chrome:'' '''Rare'''
***''Original:'' '''Epic'''
***''Monochrome, Matrix-opening:'' '''Epic'''
***''Gold, Matrix-opening:'' '''Grail'''
:{{W|Non-fungible token|NFT}}s depicting Optimus Prime in the Funko style. Some variants are depicted opening the Matrix over Cybertron, one of which (the Grail one) could be redeemed for a chance to get a physical version of the depicted figure. Said variant was limited to 999 pieces.
<center><gallery heights=200>
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_MONOCHROME.gif|Remember [[The many deaths of Optimus Prime#The Transformers: The Movie|this one?]]
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_STATIC.gif|Not gray, but still may as well be dead.
File:TRANSFORMERS_UNCOMMON_OPTIMUS-PRIME_GLOW.gif
File:TRANSFORMERS_RARE_OPTIMUS-PRIME_REDCHROME.gif|[[The Return of Optimus Prime, Part 1|Oops.]]
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME_ORIGINAL.gif
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME-GOLDVARIANT_MONOCHROME.gif
File:TRANSFORMERS_GRAIL_OPTIMUS-PRIME-GOLDVARIANT_ORIGINAL.gif
</gallery></center>
{{-}}{{anchor|PopDigital}}
[[File:Funko Pop Digital Optimus Prime.jpg|thumb|upright=1.44|Stealing NFTs is the right of all sentient beings.]]
*'''Optimus Prime''' (2022)
**''ID number:'' '''49'''

:Part of the ''Pop! Digital'' segment, this regular-sized vinyl figure portrays Optimus opening the Matrix of Leadership and is entirely painted gold. It could only be acquired by redeeming the Grail NFT above.

{{-}}{{anchor|Pop! Pin}}
[[File:Funko-Pop-Pin-Optimus-Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (''Pop!'' Pin, 2022)
**''ID number:'' '''18'''
**''Accessories:'' Display stand
:A metallic enamel pin based on Optimus Prime's vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

:A "redeco" of this pin as [[Nemesis Prime (G1)#Pop! Pin|Nemesis Prime]] was also released as a limited edition chase variant.

{{-}}{{anchor|Pop! Masks}}
[[File:Funko Pop mask Optimus Prime.jpg|thumb|upright=1]]
*'''Optimus Prime''' (''Pop!'' Masks, 2022)
:Released by Disguise Costumes in collaboration with Funko and exclusive to Walmart, ''Pop!'' Masks Optimus Prime is a large half face mask based on the head of the vinyl figure.

{{-}}{{anchor|Pop! Hallmark}}
*'''Optimus Prime''' (Christmas tree ornament, 2022)
:Released by [[Hallmark]] and also exclusive to Walmart, this Optimus Prime Christmas tree ornament is virtually identical to the vinyl figure in appearance.

{{-}}{{anchor|Fundays1}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Exclusive to a Funko-oriented event called Fundays, this regular-sized vinyl figure portrays [[Freddy Funko]] cosplaying as Optimus Prime. The body of this figure is the same as the regular Optimus, while the head has been modified to incorporate Freddy's face. This regular version was limited to 1500 pieces.

{{-}}{{anchor|Fundays2}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:A metallic version of the Freddy Funko as Optimus Prime figure was also available, now limited to only 500 pieces.

{{-}}{{anchor|Fundays3}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Also available and limited to 500 pieces was a version of Freddy Funko as Optimus Prime that glows in the dark.

{{-}}{{anchor|PopPotato}}
*'''Mr. Potato Head Optimus Prime''' (''Pop! Digital Retro Toys'', 2022)
**''Rarity:'' '''Grail'''
**''ID number:'' '''127'''
:Similar in concept to other [[Mr. Potato Head]] toys, this vinyl figure is a representation of said character taking the appearance of Optimus Prime, except it can't be taken apart piece by piece.

:This figure is limited to 1550 units and can only be acquired redeeming an NFT representing this version of the character.

{{-}}{{anchor|PopLights}}
*'''Optimus Prime''' (Lights and Sounds, 2023)
**''ID number:'' '''120'''
**''Accessories:'' Base
:A standard-sized figure released in the ''Retro Toys'' line, "Lights and Sounds" Optimus Prime features... well, lights and sounds. He also includes a display base, and is posed with his left arm pointing forward and his right hand holding his blaster.

:This figure is exclusive to the Funko Shop online store.

{{-}}{{anchor|Pop! Tee}}
*'''Optimus Prime Tee''' (T-shirt, 2023)
:A T-shirt available on Funko's online store, it features artwork of ''Pop!'' Optimus Prime in the same pose and style as the original Generation 1 Optimus Prime packaging art.

{{-}}{{anchor|Pop40Years}}
*'''Optimus Prime''' (2024)
**''ID number:'' '''131'''

:Released in celebration of the 40 years of the franchise, this regular sized ''Pop! Retro Toys'' Optimus Prime is a similar mold to the original release, but is doing a different pose and features toy-accurate yellow eyes.

{{-}}{{anchor|Pop40Years2Pack}}
*'''Optimus Prime & Megatron''' (2-pack, 2024)

:A Hot Topic exclusive release of the 40th anniversary Optimus Prime and [[Megatron (G1)/merchandise#Pop40Years2Pack|Megatron]] vinyls with a metallic finish to their paintings.
{{--}}

==Modern Icons==
[[File:Modern_Icons_Optimus_Prime_helmet.jpg|thumb|upright=1.66|GIVE ME MY FACE.]]
*'''Optimus Prime Modern Icons Replica Helmet''' (December 27, 2021)
:A collaboration between Hasbro and statue and replica brand Modern Icons, this is a wearable helmet for adult collectors, based on Optimus Prime's head. It features light-up eyes and authentic sounds and phrases.

:Originally due for release on August 16, 2021, the Optimus Prime helmet was delayed until December 27 (as was [[Megatron (G1)/merchandise#Modern Icons|its Megatron counterpart]]). The helmet is a GameStop exclusive in the United States.
{{--}}

==''Super Shogun''==
*'''Optimus Prime''' (2021)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Another "retro-styled" non-transforming figure by [[Super7]], ''Super Shogun'' Optimus Prime is meant to be an homage to the 1970s "{{w|Shogun Warriors (toys)|Shogun Warriors}}" toyline. To match the famous features of those older toys, this Optimus stands 24" tall and is mostly made of hollow plastic, with 3 points of articulation, wheels on his feet, and a spring-loaded firing left fist. His chest doors open to reveal a removable Matrix of Leadership. Suggested retail price was $350 - hopefully if you're old enough to remember "Shogun Warriors" you've gotten a good job by now.

*'''Optimus Prime (Fallen Leader)''' (2022)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Continuing the trend from their ''ReAction'' and ''ULTIMATES!'' Optimus Prime figures above, Super7 also produced a grey redeco of ''Super Shogun'' Optimus Prime representing his dead body. {{-}}

==''Zōteki''==
[[File:ZOTEKI-024-Optimus-Prime.jpg|thumb|upright=1.66|I farted.]]
*'''Optimus Prime''' ([[2021]])
**''ID number'': '''024'''

:A collaboration between [[Hasbro]] and statue/replica brand [[Jazware]], ''[[The Transformers (franchise)|The Transformers]]'' was added as a part of the ''[[Zōteki]]'' line alongside other iconic brands such as [[Marvel Comics|Marvel]], to recreate some of the main "Generation 1" characters. The 24th figure of the ''Zōteki'' line; Optimus Prime wields his iconic [[Ion blaster]].

:Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
{{-}}

==Eaglemoss==
[[File:EaglemossChess OptimusPrime.jpg|upright=1.11|thumb]]
* '''Transformers Gen-1 Chess Set''' (<s>2021</s>)
:In the planned [[Chess#Eaglemoss|Transformers Chess Set]] by [[Eaglemoss]], a relatively large and very well detailed statue of Optimus Prime was slated to be the standard King piece on the Autobot side.

:A Kickstarter campaign to raise the necessary funds for this project was launched, but failed to meet its goal by September 24, 2021 and the whole thing was canceled. The Optimus Prime piece managed to technically get a very limited release, however, as some online influencers in the ''Transformers'' fandom received copies gifted to them by Eaglemoss during the Kickstarter campaign.
{{canceledtoy}}
{{-}}

==e-HOBBY==
===''Transformers Character Card''===
{{anchor|TCC G1}}
[[File:Transformers Character Card G1 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Convoy & Megatron Set''' ([[January 25]], [[2022]])
**''ID number:'' '''01 & 02'''
{{toydesigner|[[Shin Sasaki]] (illustration)}}

:Released as part of the first wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Roller (G1)|Roller]]) and [[Megatron (G1)|Megatron]] (with [[Starscream (G1)|Starscream]], [[Thundercracker (G1)|Thundercracker]] and [[Skywarp (G1)|Skywarp]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#01|Translation of G1 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Laser}}
[[File:Transformers Character Card G2 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Battle Convoy & Megatron Set''' ([[March 14]], 2022)
**''ID number:'' '''11 & 12'''

:Released as part of the second wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime and Megatron in their ''[[Transformers: Generation 2 (franchise)|Generation 2]]'' bodies along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#LaserOptimusPrime|Laser Optimus Prime]]" toy.
::*''[[Source:Transformers Character Card#11|Translation of G2 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Black}}
[[File:Transformers Character Card Megatron Black and Convoy Black.jpg|upright=1|thumb]]
*'''Transformers Card Binder (includes 2 special cards)''' ([[November 1]], 2022)
**''ID number:'' '''EX'''

:Released in its fifth wave as something of a "season one finale" to the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this 40-slot binder intended to contain the entire ''Character Card'' series thus far is packed with a pair of holographic trading cards depicting super-deformed art of Optimus Prime and Megatron in the forms of their first e-HOBBY exclusive toys along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the ''[[Hybrid Style]]'' "[[Optimus Prime (G1)/toys#THS02B|Convoy Black Version]]" toy.
::*''[[Source:Transformers Character Card#EXOP|Translation of Optimus Prime Black Version's Transformers Character Card]]''
{{-}}

{{anchor|TCC Hero}}
[[File:Transformers Character Card Jhiaxus and Hero OP.jpg|upright=1|thumb]]
*'''Jhiaxus & Convoy Missile Trailer Set''' ([[February 6]], [[2023]])
**''ID number:'' '''41 & 42'''

:Released as part of the sixth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Jhiaxus (G2)|Jhiaxus]] and ''Generation 2'' Optimus Prime along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#HeroOptimusPrime|Hero Optimus Prime]] toy.
::*''[[Source:Transformers Character Card#42|Translation of Hero Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Matrix}}
[[File:Transformers Character Card Matrix and Alpha Trion.jpg|upright=1|thumb]]
*'''Alpha Trin & Convoy Set''' ([[April 22]], 2023)
**''ID number:'' '''49 & 50'''

:Released as part of the seventh wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of "[[Alpha Trion|Alpha Trin]]" and Optimus Prime touting the [[Matrix of Leadership]] along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus's card notably eschews the line's usual [[Power Plans]]-inspired motif for a reproduction of the original 1984 [[Package art#Hasbro|toy packaging mural]] in celebration of the line's 50th release.
::*''[[Source:Transformers Character Card#50|Translation of Optimus Prime (with Matrix)'s Transformers Character Card]]''

{{-}}

{{anchor|TCC Orion}}
[[File:Transformers Character Card Hot Rod and Orion Pax.jpg|upright=1|thumb]]
*'''Orion Pax & Hot Rodimus Set''' ([[August 14]], 2023)
**''ID number:'' '''59 & 60'''

:Released as part of the eighth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Orion Pax and "[[Hot Rod (G1)|Hot Rodimus]]" along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#59|Translation of Orion Pax's Transformers Character Card]]''

{{-}}

{{anchor|TCC Action}}
[[File:Transformers Character Card Action Master Megatron and OP.jpg|upright=1|thumb]]
*'''Convoy (Action Master) & Megatron (Action Master) Set''' ([[December 28]], [[2024]])
**''ID number:'' '''93 & 94'''

:Released as part of the thirteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Armored Convoy]]) and Megatron (with [[Neutro-Fusion Tank]]) in their [[Action Master]] forms along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#93|Translation of Action Master Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Autobot}}
[[File:Transformers Character Card Autobots and Primus.jpg|upright=1|thumb]]
*'''Primus and Cybertron Army Set''' ([[February]], [[2025]])
**''ID number:'' '''101 & 102'''

:Released as part of the fourteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Primus]] in the form of his [[Primus#2010|"Creator" toy]] and the Generation 1 [[Autobot]]s (as represented by Optimus Prime, [[Blaster (G1)|Blaster]], [[Eject (G1)|Eject]], [[Grimlock (G1)|Grimlock]], [[Prowl (G1)|Prowl]], [[Crossblades (G1)|Crossblades]], [[Jazz (G1)|Jazz]] and [[Turbo Board]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#102|Translation of the Autobots' Transformers Character Card]]''

{{comingsoontoy}}
{{--}}

===Acrylic keychain series===
[[File:E-Hobby Optimus Prime and Bumblebee keychains.jpg|upright=1|thumb]]
*'''Convoy & Bumble''' ([[October]], [[2022]])

:Released as part of the first wave of an [[e-HOBBY]] exclusive series, this pair of keychains depicts character art and assets re-used from Optimus Prime and [[Bumblebee (G1)|Bumblebee's]] [[The Transformers: Masterpiece|''Masterpiece'']] releases, namely [[Optimus Prime (G1)/toys#MP44|MP-44 Convoy]] and [[Bumblebee (G1)/toys#MP45|MP-45 Bumble and Spike 2.0]] respectively.

{{--}}

==''Authentics''==
{{anchor|ClipBot}}
[[File:ClipBotsPrime.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2018)

:''Clip Bots'' Optimus Prime is a small [[super deformed]] plush that can be "transformed" into a little tractor trailer by flipping it inside out. It features a plastic clip so it can dangle from whatever you clip it to.
{{-}}
{{anchor|22Mask}}
[[File:Authentics Optimus Prime Mask 2022.jpg|upright=1|thumb|Unlike some Optimus Primes, he'll [[Transformers: Revenge of the Fallen (film)#Quotes|give you his face]] instead.]]
*'''Optimus Prime''' (2022)

:Modeled after Optimus Prime's evergreen design, this [[roleplay toy]] mask was released along side an [[Bumblebee (G1)/merchandise#22Mask|Bumblebee]] version.
{{-}}
{{anchor|AquaPals}}
[[File:AquaPalsLargeOptimus.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2023)

''Aqua Pals'' Optimus Prime was released by [[WAHU]]. It is a plush made out of material designed to dry quickly, allowing it to be played with in water. The large plush is 24 inches tall.
{{-}}

{{anchor|DogToys}}
[[File:CrunchandsqueakOptimusPrime.jpg|upright=1|thumb]]

*'''Crunch & Squeak Optimus Prime''' (2023)

Manufactured by [[Gramercy Products]], ''Crunch and Squeak'' Optimus Prime is a simple dog toy, with a water bottle inside to be crunched. Because of this, its legs are fully attatched to each other. The embroidery color for the outline of the eyes varies, coming in gray or blue.
{{-}}
*'''Squeak & Tug Optimus Prime''' (2023)

''Squeak & Tug'' Optimus Prime is another dog toy by Gramercy Products. It has two rope knots connected from the bottom of each of its legs, for tugging purposes. It also has a mouth ''on top'' of its faceplate.

{{anchor|24Mask}}
[[File:Authentics_Optimus_Prime_Mask_2024.jpg|upright=1|thumb]]
*'''Optimus Prime Mask''' ([[2024]])

:Manufactured by [[Peachtree Playthings]], this mask is a completely new mold based on Optimus Prime's evergreen design, though it's a bit more stylized then the 2022 version. It was found at discount stores such as Dollar Tree with no prior announcement. As with the previous mask, it was released along side an [[Bumblebee (G1)/merchandise#24Mask|Bumblebee]] version.
{{-}}
{{anchor|CBoptimus}}
[[File:Authentics Cyber Battlers Optimus.jpeg|upright=1|thumb]]
*'''Cybertron Battlers Optimus Prime''' ([[2022]])
:Released in the ''Cybertron Battlers'' subline of ''Authentics'', this vinyl figure is a non-transforming, 5.5 inch rendition of Optimus Prime in his evergreen design with limited points of articulation. He has an Energon Axe molded into his right hand.

:He comes packaged either individually with a tag, or in twos in a box together with [[Bumblebee (G1)/merchandise#Authentics|Bumblebee]] and [[Megatron (G1)/merchandise#Authentics|Megatron]].
{{-}}

{{anchor|Teeturtlereverse}}
[[File:Small_Reversible_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Reversible Plushie Optimus Prime''' (2025)

:Released by [[TeeTurtle]], ''Reversible Plushie'' Optimus Prime is a round, [[super deformed]] plush, that can be turned inside out to reveal a truck alternate mode. A 3 inch version was released in blind boxes, while a 6 inch version was made available exclusively at [[Walmart]]. It appears to be based on Optimus Prime's [[evergreen]] design, with a license plate that reads 'ROLL OUT'.
{{-}}
{{anchor|Teeturtlecloudhead}}
[[File:Cloudheads_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Cloudheads Optimus Prime''' (2025)

:Also released by [[TeeTurtle]], ''Cloudheads'' Optimus Prime is another [[super deformed]] plush based off of Optimus's [[evergreen]] design. It is 5 inches tall. It has a large head, and its body is weighted with glass beads.
{{-}}

==Nendoroid==
[[File:Nendoroid G1 Optimus Prime.jpg|upright=1.66|thumb]]
*'''Nendoroid Optimus Prime (G1 Ver.)''' ([[2022]])
**''Nendoroid ID Number'': '''1765'''
**''Accessories'': Ion blaster, Energon-axe, pointing hand

:[[Nendoroid]] Optimus Prime is a [[super deformed]], adorable rendition of the original Autobot commander. It is the first Nendoroid figure released for a "Generation 1" character, as the first Nendoroid figures for ''Transformers'' were for the ''[[Bumblebee (film)|Bumblebee]]'' movie.

:As with most Nendoroids, Optimus Prime can interchange body parts with compatible figures, and comes with an alternative "pointing hand" accessory to aid with specific posing. The figure is packed with Optimus's trademark Ion blaster and Energon-axe weapons (generically referred to as a gun and an energy axe by the Good Smile Company website), the latter of which replaces Optimus's hand when wielded. He also features articulation at the head, knees, shoulders, elbows, and even his chest.

:This mold was later redecoed as [[Nemesis Prime (G1)#Nendoroid|Nemesis Prime]].
{{-}}

==Icon Heroes==
*'''Optimus Prime X Bumblebee Retro Pin Set''' (2022)
: A hard enamel pin based on Optimus Prime's original G1 package art made by Icon Heroes. It comes carded with a [[Bumblebee (G1)/merchandise#Icon Heroes|Bumblebee]] pin.

: This pin was also available in [[Nemesis Prime (G1)#Icon Heroes|Nemesis Prime]] colors.
{{comingsoontoy}}

{{-}}
[[File:Icon-Heroes-Optimus-Prime-Action-Statue.jpg|upright=1.11|thumb|''Of course'' we need another superdeformed Optimus Prime statue, why do you ask?]]
*'''Optimus Prime Action Statue''' ([[2023]])
: A 12" tall polystone statue of Optimus Prime holding his ion blaster and standing over an Autobot insignia base. The statue is slighty superdeformed with an unusually large head and features some neck articulation.

: Each sample is going to be individually numbered and come with a certificate of authenticity.
{{comingsoontoy}}

{{-}}

==Just Play==
{{anchor|Podpals}}
[[File:PodpalsOptimusLarge.jpg|upright=1|thumb]]

*'''Podpals Optimus Prime''' (2023)

Made by [[Just Play]], ''Podpals'' Optimus Prime is a rounded plush. It has tiny flaps of fabric for its legs and head details, while other details are printed on. There are two versions, an 8 inch version and a 3 inch version. They are identical besides their size.

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>

:Optimus Prime is a small, soft plastic figure, 2" tall, with no articulation. It's overall based on his appearance in the G1 cartoon. He does have a noticable lack of paint apps; most notably the windows on his chest not being painted at all.

:The packaging is G1-styled with the classic black-red gradient and the G1 Optimus Prime toy in the top right corner.

[[File:JustPlay_G1_Optimus_Prime.jpg|thumb|upright=.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>

:This figure is identical to the original release. Unlike the original release, however, he also comes with a foil sticker depicting his G1 design on a card with a sort of profile picture on the back and text underneath it saying "OPTIMUS PRIME IS THE LEADER OF THE AUTOBOTS." The packaging is also different as it no longer features Optimus Prime (having been replaced with a block advertising the new card).
: There's a variant of this found at stores like Dollar Tree where the block advertising the card is moved to the top left with a red circle that says "$1.25" in it in the top right instead.

{{-}}

==Kotobukiya==
===Bishoujo Series===
[[File:Bishoujo-Series-OptimusPrime.jpg|upright=1.3|thumb|Looking this good is the right of all sentient beings.]]
*'''Bishoujo Series Transformers Convoy/Optimus Prime''' (January 2023)
**''Accessories'': Alternate masked face
**''Known designers:'' [[Shunya Yamashita]] (artist)

:''[[Kotobukiya]] [[Bishoujo Series]]'' Convoy/Optimus Prime renders the classic Autobot commander as a cute anime girl (formally termed as a ''{{w|Bishōjo}}''). Bishoujo Optimus's necklace represents the [[Matrix of Leadership]], while Prime's trailer and wheels are represented as her suitcase and boots respectively.

:''Bishoujo Series'' Optimus Prime also comes with an alternate [[Mouthplate|masked]] headpiece, and a red display base designed after the Autobot insignia. A Deluxe Edition release also included a B5-sized acrylic board for display, featuring Yamashita's original artwork of the character.

:This statue was later recolored and retooled to create ''Bishoujo Series'' [[Nemesis Prime (G1)#Kotobukiya Bishoujo Series|Nemesis Prime]].
{{-}}
===Frame Arms Girl===
[[File:Kotobukiya-TF-Optimus-Prime-Fumikada-Shimane-Ver-kit.jpg|thumb|upright=1.66|Minerva's <s>Ginrai</s> Optimus Prime cosplay.]]
*'''Convoy/Optimus Prime Humikane{{sic}} Shimada Ver.''' (June 2025)
**''Accessories'': 5 pairs of hand parts, 2x2 Faceplates (Android, Human), Front hair/helmet parts for human face config, Ion Blaster, Energon Axe
**''Known designers:'' [[Fumikane Shimada]] (artist)

:Designed by Humikane (actually "Fumikane") Shimada of ''Frame Arm Girls'' and ''30 Minutes Sisters'' fame, this 135mm articulated ''FA Girl'' model kit (though technically not referred to as such on the box, she is listed as part of the ''FA Girl'' product line on Kotobukiya's website) of Optimus Prime/Convoy is another personified take of the character compared to the ''Bishoujo Series'' statue above. Aside from her hand parts and the two signature weapons, Optimus also comes with two types of faceplates, with two expressions for each, and a few front hair/helmet parts for each configuration. The rear truck wheels on her legs can be flipped down to form a pair of support skates.
{{--}}

==Micro Machines==
[[File:MMMPrime&Tracks.jpg|upright=1.66|thumb]]
*'''Optimus Prime Hauler Playset''' (2022)
**''Accessories'': [[Tracks (G1)/toys#Micro Machines|Tracks]] vehicle, decoder
{{charstubtoys}}

==XM Studios==
*'''Optimus Prime''' (2022)

:This hand-painted porcelain statue of Optimus Prime stands over 26" tall and features alternate arms to allow owners to display him in different poses or switching out his signature laser rifle for his energon axe. His chest-mounted Matrix of Leadership lights up, and the set also includes a sculpted version of the truck mode to display next to the robot. Suggested retail was about $1,700.

*'''Optimus Prime Bust''' (2023)

:A four-foot-tall bust of Optimus Prime, with hand-burnished metallic features and a $4,000 price tag.
{{-}}

==''Transformers × Mini World''==
[[File:MiniWorldOptimus.jpg|thumb|upright=1.66]]
*'''Optimus Prime''' (2023)
**''Accessories'': Transforming base, gun, axe, 2 smokestacks, machine part, crane arm, 2 connectors

:''[[Transformers × Mini World]]'' Optimus Prime is a tie-in to the popular [[China|Chinese]] game ''[[Mini World]]''. It comes with a display base which can fold up into a cube-shaped representation of Prime's truck mode, complete with rolling wheels. The figure can transform into a storage mode and store fully inside the cube, or you can remove his head and replace it with the folded up cube. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and axe accessories. The set includes two smokestacks that can be pegged onto the truck-cube mode.

:Each set includes [[Build a Figure]]-like machinery components which can be combined with parts from other sets to make new structures.

:It is exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.
{{-}}

==Mochibots Transformers Plush==
[[File:MochibotsPrime.jpg|upright=1.3|thumb|It was either this or a banana to show how tall I am. And I'm ''NOT'' Primal!]]
<ul class="iconlist">{{Bp-a1|'''Mochibots "Transformers" Plush Convoy''' (2023)}}</ul>
:Apart of the line of cute, cuddly Transformers Plushies, [[Mochibots Transformers Plush|Mochibots]] Convoy (otherwise known as ''Optimus Prime'') is a 5.5 CM tall variation of the character, with Sunbow cartoon-accurate white pants and all! This Convoy is given a "Fumo" stylization, making the robotic detailing more rounded and soft, with stubby limbs and a cute, somewhat stern expression. Every detail is sewn-in, leading to him and the rest of the Mochibots line having a premium feel, with added texture and depth added to each detail. In addition to all this cute Convoy's offerings, he has a block of stuffed material in the back to represent his "Backpack", and a stitched-on Autobot logo! Though, much like [[Cliffjumper (G1)/toys#Mochibots Transformers Plush|Cliff]], the Autobot logo seems to have a squinting expression, likely a limitation of how far the detail can go with this process. Like many other Mochibots, Convoy also features a special, reflective material in his eyes and windows, with light giving it a special shimmer effect whenever it hits it.

:Convoy was released in the Summer of 2023 in "Volume 1" of the Mochibots line, alongside Cliff, Bumble, and Convoy's Shattered Glass counterpart. This line was exclusive to China and Japan, with almost all of them being locked to Asia via [[amiami|amiami's]] digital storefront.

{{-}}

==Fools Paradise==
{{anchor|LOWFOOL}}[[File:LOWFOOL League of Steel Optimus Prime.jpeg|upright=1.66|thumb|Some contrast to the bishoujo, huh?]]
*'''Optimus Prime''' (2023)
**''Accessories'': Football

:Part of a collaboration between Hasbro and [[Hong Kong]]-based online store ZCWO, Optimus Prime joins the "League of Steel" subline of [[Fools Paradise]]'s LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues of [[Neon Genesis Evangelion|Evangelion]]s and {{w|Gundam}}s. He is depicted as a human man wearing heavily Optimus Prime-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache (not, as you might surmise, as a reference to [[Peter Cullen]]'s own face fuzz).

:Preorders for Prime opened in June 2023, with a projected release date of November.

{{-}}

{{anchor|ZCWO}}[[File:Fools Paradise Optimus Prime statue.jpeg|upright=1.3|thumb]]
*'''Optimus Prime''' (2024)

:A second statue of Optimus Prime by Fools Paradise portrays Optimus Prime in a much more conventional (if heavily stylised) design. This vinyl statue of Prime stands approximately 60cm tall, and features light up LED eyes and apparently boasts a full range of articulation. It also features a somewhat weathered paint job.

:Preorders opened in November 2023, with a projected release date of March 2024.
{{comingsoontoy}}

{{-}}

==McFarlane Toys==
{{anchor|PagePunch}}[[File:Page Punchers Optimus Prime and Megatron.jpeg|upright=1.66|thumb|If you squint, you can just ''barely'' make out the lack of a waist swivel.]]
*'''Optimus Prime and Megatron''' (2024)
: ''[[Page Punchers]]'' Optimus Prime is 3-inch non-transformable action figure based off his [[IDW Publishing|IDW]] design.

: He comes in a two-pack with [[Megatron (G1)/merchandise#PAGEPUNCH|Megatron]], packaged with [[New Cybertron Part 1: To Walk Among the Chosen|''Optimus Prime'' #1]] and [[Dissolution Part 6: This Machine Kills Fascists|''Lost Light'' #6]].

{{-}}

==''Hot Wheels''==
{{picsneeded}}
{{anchor|HWTrackFleet}}
[[File:Hot Wheels Track Fleet Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1| '''Optimus Prime''' (Track Fleet, 2024)}}</ul>
:*''Accessories'': Trailer (detachable)
{{toydesigner|[[Charlie Angulo]] ([[Mattel]])}}
:''[[Hot Wheels (franchise)|Hot Wheels]]'' Track Fleet Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Unlike the concurrently released [[Bumblebee (G1)/merchandise#HWScreenTime|''HW Screen Time'' Bumblebee]], Optimus does ''not'' have a sculpted robot face on his undercarriage.

{{-}}{{anchor|HWSkate}}
[[File:Hot Wheels Skate Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Skate, 2024)}}</ul>
:*''Accessories'': Finger sneakers
:Part of the ''Hot Wheels Skate'' subset, this is an Optimus Prime-themed finger skateboard that comes with a pair of red finger sneakers. The shape and packaging use Dreamwave-era artwork of Optimus Prime.

{{-}}{{anchor|HWScreenTime}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (HW Screen Time, 2025)}}</ul>
:*''Mainline ID number:'' 104/250
:*''HW Screen Time ID number:'' 6/10
{{toydesigner|[[Manson Cheung]] and Leeway Chang ([[Mattel]])}}
:''Hot Wheels'' HW Screen Time Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Compared to the ''Track Fleet'' version, this version of Optimus ''has'' a sculpted robot face on his undercarriage, is larger and does not feature a trailer. It is largely based on the transforming ''Mattel Creations'' version of Optimus but with some modifications for cost reasons.

{{--}}

==''Beyblade X''==
[[File:Beyblade_X_Transformers_OptimusPrime.jpg|thumb|Not pictured: Optimus Prime using this to part the Red Sea.]]
*'''Optimus Prime and Megatron Multipack Set''' (2024)

:'''Optimus Prime 4-60P''' was available in a two-pack with [[Megatron (G1)/merchandise#Beyblade X|Megatron 4-80B]], which was exclusive to Amazon in Hasbro territories, and exclusive B4-sponsored stores in Takara-Tomy territories. It consists of three pieces that can be interchanged with those of [[Beyblade#BEYBLADE X|other ''Beyblade X'' tops]]; an attacking "Blade" primarily made of metal, a "Ratchet" that locks parts together and determines height, and a "Bit" that touches the ground and determines movement.

:The "Optimus Prime" Blade features evergreen art of Optimus Prime on its central Gear Chip and is partial of the mainline ''Beyblade X'' Blade "Helm Knight". The Ratchet (4-60) and Bit (Point) are recolored parts from other ''Beyblade X'' tops.

:In Hasbro territories, a QR Code sticker hidden underneath the Blade can be scanned into the ''Beyblade X'' companion app. In Takara-Tomy territories, the QR Code stickers are omitted in favor of a Beycode Card packed with the instructions. However, scanning any of these QR codes only awards the player with in-app points, and will not unlock the Beyblade for in-game use like it would for any mainline ''Beyblade X'' tops.

{{-}}

==Yolopark==
===AMK===
{{anchor|AMKPro}}
[[File:YoloparkAMKProG1OptimusPrime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released as part of Yolopark's AMK Pro line, Optimus Prime comes in pre-assembled modules as opposed to traditional model kit runners. This allows him to be assembled quickly and easily without tools. Unlike Yolopark's regular AMK line, the AMK Pro line features diecast parts as well as light-up features. In Prime's case, his eyes will light up when tapping his head with a magnet. The feature requires one CR927 battery which is not included.

:The fully assembled figure resembles the ''Masterpiece'' Convoy 3.0 and features an opening Matrix chamber and fully articulated hands, eliminating the need for alternate hands. Both the ion blaster and Megatron gun can be wielded by his hands, though removing the stalk from the Megatron gun makes this much easier.

:The figure was redecoed into Nemesis Prime.

{{-}}
{{anchor|AMKHasbroEdition}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Hasbro Edition, 2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Stand with Teletraan-1 Backdrop

:The AMK Pro Optimus Prime kit is re-released under the "Hasbro Edition" branding. In this release, the die-cast parts have been replaced with plastic, and the light-up feature and the Megatron gun accessory are no longer included. In addition, Prime's display stand also comes with an additional Teletraan-1 backdrop for the arm unit.

{{-}}
{{anchor|AMKComboSet}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-and-Megatron-Combo-Set-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Megatron and Optimus Prime Combo Set''' (2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Energy Mace, Light Sword, Laser Pistol, Two display stands (Teletraan-1 Backdrop, Ark Backdrop)

:The "Hasbro Edition" of the AMK Pro Optimus Prime kit is also sold as a two-pack with the same line's Megatron. The 2-pack also comes with a unique pin.

{{-}}{{anchor|AMKClear}}
[[File:Yolopark-TF-Cybertron-Con-2024-AMK-Pro-Optimus-Prime-Clear.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Clear Color)''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released exclusively for the Cybertron Con 2024 in Shanghai (and later in the Yolopark online store), this Optimus Prime is a translucent redeco of the AMK Pro kit.

{{-}}{{anchor|2025AMK}}
[[File:Yolopark-TF-AMK-Optimus-Prime-(2025).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK, 2025)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Matrix of Leadership]]

:This AMK Optimus Prime only comes with his Ion Blaster and the Matrix of Leadership. In addition, He also features cartoon-based colors, complete with opaque chest windows. As the original mold's joints were meant to be molded in die-cast or metallic gray plastic, these areas were also molded in the same white plastic.
{{-}}

===AMK Mini Series===
[[File:TF-Yolopark-AMK-Mini-Series-Optimus-Prime.jpg|thumb|upright=1.66|Swap my right arm with Megatron's so I could go to the offensive!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': 2 additional pairs of hands (Splayed, Pointing), [[Ion blaster]]

:The ''AMK Mini Series'' Optimus Prime is a smaller version of the character, featuring swappable hand parts and his usual Ion Blaster.

:Initial images of the kit's hand-painted prototypes showed Prime utilizing a desaturated blue and red. His white parts are slightly darker, while his grill and abs are flat grey, and the chest windows are white. Unlike the prototype, the blue paint on the crotch is missing in the final product.

:Optimus Prime is sold as either an individually marked single, a 2-pack with the same line's Megatron in a single box, or as a blind-box figure. This mold was also used to make [[Nemesis Prime (G1)|Nemesis Prime]] for the blind-box line, and [[Delta Magnus]] for the Agabyss-organized ''[[BotCon]] 2024'' exclusive House of Magnus BotCon VS Set.

{{-}}{{Anchor|AMKMiniIDW2005}}
<ul class="iconlist">{{Bp-a1|'''Orion Pax (IDW)''' (2025)}}</ul>

:This ''AMK Mini Series'' kit is based on Orion Pax's appearance in the 2005 ''IDW'' comics.

{{comingsoontoy}}
{{-}}

===BMK===
[[File:Yolopark-BMK-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Accessories'': [[Ion blaster]]

:The ''BMK'' (Which stands for "Beginner Model Kit") Optimus Prime is a larger version of the ''AMK Mini'', with the design being based on the ''AMK/Pro'' release. As with other ''BMK''s, Optimus features similarly basic articulation, consisting of a ball-jointed head, ball-jointed shoulders, single-axis 90-degree elbows, a rotating waist and lower legs, and slightly swiveling ankles...that's it.

:The kit has an unfortunate packaging quality control issue: the thin head antennas are likely to be bent or even broken off in most packages.
{{-}}

==Blokees==
===Galaxy Version===
{{anchor|Galaxy Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus.jpg|thumb|upright=1.66|Blokees kits are ''truly'' the right of all Sentient Beings.]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot/Decepticon insignias

:Released in the first wave of ''Galaxy Version'' line of blind boxes, [[Blokees]] Optimus Prime is a roughly 4-inch tall, highly-articulated, and non-transforming snap-on model kit of the Autobot leader. He is built on a "Standard Body" skeleton shared with other Blokees figures in the line, but with different body pieces to make them distinct. As advertised in the box, Prime has a pull rate of 1 in every 12 boxes, or three times across four cases.

:Prime comes with a pair of closed and open hands, along with a left hand molded in a pointing position exclusive to this figure. He also comes with his trademark Ion Blaster and Energon axe weapons—the former can be plugged into the closed hands, and the latter can be plugged into either wrist. The barrel of the Ion Blaster is compatible with the blast effects included with Ironhide, Megatron, and Skywarp. He also has a figure stand with either four studs (China release/Chinese logo) or two studs (Global release/English logo) on top, which he can plug into and connect to similar stands. Optimus can also accommodate the jetpack included with Sideswipe, which was released as part of the ''Shining Version'' lineup.

:If one chooses, Prime's inner shoulder parts and elbow joints can be swapped with the red-colored pieces from the same lineup to create a more cartoon-accurate coloration.

:His body parts are redecoed to make ''Galaxy Version'' [[Optimus Prime (SG)#Blokees|Shattered Glass Optimus Prime (IDW)]], [[Ultra Magnus (G1)/merchandise#Blokees|Ultra Magnus (DW)]], and [[Nemesis Prime (G1)#Blokees|Nemesis Prime]].

{{-}}{{anchor|BlokeesMetallic}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot and Decepticon insignias

:The chase figure of ''Galaxy Version'' 01, with a much slimmer pull rate of 1 in every 36 boxes, i.e. once in four cases. Prime is redecoed in a metallic sheen, save for the joint pieces along with more show-accurate deco on the crotch, thighs, back, and shins. He comes with the same accessories as his regular counterpart.

{{-}}
{{anchor|BlokeesPink}}
[[File:Blokees Cybertron Con 2024 Pink OP.jpg|thumb|upright=1.4|Not the kind of [[fandom:gundam:Trans-Am_System|Trans Am]] you'd expect Optimus Prime to turn into.]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Pink)''' (Galaxy Version, 2024)}}</ul>
:*''Accessories:'' Pair of open hands, one pointing left hand, Energon Axe, Ion Blaster, Matrix of Leadership with support stand

:Released exclusively for the Cybertron Con 2024 event, this Optimus Prime kit is sold as a pre-assembled redeco of the first Galaxy/Shining Version kit, featuring opaque and translucent <s>[[energon]]</s> pink livery, and omits the light-up feature. He comes with all weapons and hand accessories from the original Galaxy Version release and the Matrix/support stand from the Shining Version.

:This Optimus Prime is limited to 999 units, with 400...no, 100<ref>{{citesocial|quote=Dear Fans, We sincerely regret to inform you that the on-site sales of the exclusive item - Optimus Prime (Pink) at the 2024 Transformers Cybertron Con have been temporarily canceled. We apologize for any inconvenience this may cause! As of today (December 6), we have sold 100 units, 300 remaining units would be sold through other sales channels, please stay tuned for our further announcements. Thank you for your understanding and support!|link=https://twitter.com/BlokeesOfficial/status/1864925074991780214|name=BLOKEES.OFFICIAL|site=Site Formerly Known as Twitter|year=2024|month=12|day=06}}</ref> sold at the convention, and the rest distributed through online and physical stores across mainland China.

{{-}}{{anchor|GVParallelUniverse}}
[[File:Blokees-TF-Galaxy-Version-06-IDW-Optimus-Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The sixth wave of the ''Galaxy Version'' blind boxes features an Optimus Prime based on his design and coloration from the IDW story [[The Transformers: Stormbringer|''Stormbringer'']]. In addition to the new hand runner introduced in the 4th wave, Optimus comes with his twin cannons and blaster accessory, complete with its blast effect. Like the other ''Galaxy Version'' kits since Wave 5, Optimus features a slightly upgraded suite of standard body parts, notably the sturdier pre-assembled hinge joints and the multi-colored head piece with color-coded eyes.

:As advertised in the box, he has a pull rate of 1 in every 12 boxes.

{{-}}
[[File:Blokees-TF-GV-06-Hidden-Orion-Pax.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The chase figure of ''Galaxy Version'' 06, with 1:36 odds, this Optimus Prime (now called "Orion Pax") kit is a redeco of the kit above, representing the force field-equipped coloration activated by Trailbreaker in "[[Elegant Chaos Part 1: All Our Parlous Yesterdays]]".

{{-}}{{anchor|BlokeesIDWTrans}}
<ul class="iconlist">{{Bp-a1|'''IDW-Optimus Prime (Transparent Edition)''' (2025)}}</ul>
:*''Accessories:'' Pair of open hands, pair of wrist blasters, Ion Blaster

:A translucent redeco of ''GV 06'' Optimus Prime with an iridescent finish, coming pre-assembled in blister packaging. This figure had a run of 999 units, with the first 61 distributed at an event in Chengdu Station, China on June 1, 2025.

{{-}}{{anchor|GV08}}
[[File:Blokees-TF-GV08-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster

:The eighth wave of the ''Galaxy Version'' blind boxes features another new mold of Optimus Prime in a Generation 1-inspired look, but with a new set of outward forearm armor, and he only comes with his Ion Blaster. In addition to the ball-jointed waist from the previous entry, Optimus also features updated articulation, including a slide-down hip joint axis, rotating upper thigh joints, and improved double-jointed knee articulation, similar to his wave mates. This Optimus can also accommodate Sideswipe's backpack from the ''Shining Version'' line.

:Because the newly designed knee joints are made to fit the narrow gaps in the thighs and lower legs, they are incompatible with joints from previous releases, including those used for the elbows.

:If one chooses, Optimus' forearm armors can be omitted for greater accuracy.

:Along with the rest of the wavemates, Optimus is first revealed at Blokees' booth at the IBTE 2025 (Indonesia International Baby Products & Toys Expo) event.

{{-}}{{anchor|GV08Hidden}}
[[File:Blokees-TF-GV08-Optimus-Prime-Hidden.jpg|thumb|250px|Thanks for helping me... pull myself together...''I guess.'']]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hidden Style)''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, half-dead chest plate, metal splinter

:The chase figure of ''Galaxy Version'' 08, with the standard chase odds of 1 in every 36 boxes, this kit of Optimus Prime is a redeco of the regular kit above in metallic paint and molded plastic, featuring a "half-alive, half-dead" appearance. In addition to his identical accessories, Prime features an alternate front chest block with a gash that is compatible with the included metal splinter (referred to as an "Energon Axe"...okay.).

{{-}}
<ul class="iconlist">{{Bp-a1|'''Metroplex''' (Galaxy Version, 2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''

:The ''Galaxy Version'' Metroplex kit comes with a non-poseable figurine (and obviously out of scale) of Optimus Prime, and he can be pegged onto one of his open-palm hands. As he was molded from merely dark gray plastic, he can be painted in full color (or onto any of the other characters that share his appearance) if you wish.

{{-}}

===Shining Version===
{{Anchor|Shining Version}}
[[File:Blokees-TF-Shining-Version-01-Shining-Roll-Out-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 01 - Shining Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (weapon-holding, splayed), ion blaster, Energon Axe, Matrix of Leadership with support stand, holdable Autobot and Decepticon insignias

:Released in the first wave of Blokees' ''Shining Version'' line, this version of the ''Galaxy Version'' Optimus kit now features painted translucent face and chest parts, and a torso frame that lights up upon shaking (or at least just lightly tap some areas on the torso), causing the eyes and the Matrix pattern tampographed on his chest window to glow for a limited time. In addition to his identical accessories from the Galaxy Version release, Optimus also comes with a single Energon Cube, a separate Matrix with a support stand, and a new, larger figure stand.

:The Matrix features a pair of tabs on each handle, compatible with most ''Galaxy/Shining Version'' kits that include open-palm hands, not just Prime.
{{-}}{{anchor|BlokeesG1Toy}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:The second wave of the ''Shining Version'' series introduced a second Optimus Prime mold styled after his [[Optimus Prime (G1)/toys#The Transformers|original Generation 1 toy]], complete with an ion blaster modeled after it. As with the first ''Galaxy Version'' kit, this Optimus can accommodate Sideswipe's backpack from the ''Shining Version'' line.

{{-}}{{anchor|BlokeesG1ToyMetallic}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (Shining Version, 2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:This chase variant of the above toy-style mold is, like the ''Galaxy Version'', redecoed into metallic colors along with more toy-accurate tampographs and retains the same accessories. The eye and window pieces are now molded with orange-ish red translucent plastic instead of blue.

{{-}}{{anchor|ShiningPax}}
[[File:Blokees-TF-Shining-Version-03-Orion-Pax.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' ([[2025]])}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' 2 pairs of hands (fists/accessory-holding, splayed open-palm), Gun, figure stand

:The third wave of the ''Shining Version'' series introduced a new mold styled after his Orion Pax appearance in ''IDW Publishing'''s "Spotlight Orion Pax" comic. As with later Galaxy Version kits since Wave 5, Orion features sturdier pre-assembled hinge joints.

:Since Orion's chin is slightly too long, fully inserting the ball joint may cause his head to ''slightly'' look upwards. To prevent this, insert the ball joint into Orion's head socket first, and then attach it to the torso frame's peg hole until you feel the friction between the joint and the hole without fully inserting it.

:If you're a speed builder, be mindful when attaching the pre-assembled joints; Unlike the symmetrical joints from earlier waves, the pegs on both ends of these joints are designed to connect to specific pieces; The tabs with slightly smaller holes are intended for the upper arms and thighs, while the regular tabs are meant for the forearms and lower legs. While an incorrect knee joint assembly may cause it to very slightly lean when standing straight or in an A-stance, an incorrect elbow assembly won't be noticeably affected unless you're looking very closely.

{{-}}

===Box Sets===
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Exclusive-Yearly-Version).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon''' (2024)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, Energon Axe, Matrix of Leadership with support stand, figure stand, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:This special edition box set included [[Electrum]]-inspired gold redecoes of ''Shining Version'' (See above) Optimus Prime as well as [[Prowl (G1)/toys#Exclusive Yearly Version|Prowl]], [[Ironhide (G1)/toys#Exclusive Yearly Version|Ironhide]], [[Long Haul (G1)/toys#Exclusive Yearly Version|Long Haul]], and [[Starscream (G1)/merchandise#Exclusive Yearly Version|Starscream]], where they also receive translucent redecoes of face and chest parts painted on.

:As with the rest of his pack-in mates in this set, Optimus suffers from a case of [[Gold Plastic Syndrome]], as his molded gold hinge joints can potentially snap off due to the swirly plastic.

{{-}}
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Yearly-Version-Set-2-Optimus-Prime-(G1-Toy).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon - Defence''' (2025)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, figure stand, blast effect, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:The 2025 Yearly Version box set now features an Electrum-inspired redeco of the toy-based ''Shining Version'' Optimus Prime kit. In addition to the identical accessories, he also comes with two additional impact effects for the figure stand.

:Like the rest of this box set's kits, Optimus' hinge joints are now molded in a more mustard yellow-ish plastic, reducing the Gold Plastic Syndrome-related issue plagued from the previous release.

{{-}}

===Action Edition===
[[File:Blokees-TF-Action-Edition-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Action Edition, 2024)}}</ul>
:*Accessories: Ion Blaster, Energon-Axe, Jetpack, Wrist Communicator, Holomatter avatar, Matrix of Leadership, Index finger parts (Fist, Pointing, Trigger-finger), display stand with magnet-powered faction symbol block

:The "Action Edition" Optimus Prime is a 7-inch (approx 18cm) model kit with a slightly more complex build and features an inner frame (equivalent to the ones used for ''Bandai'''s "Master/Perfect/Real Grade" kits) with greater articulation points than his other ''Galaxy Version'' toys. In addition to his two signature weapons, the removable Matrix of Leadership, and the jetpack, Optimus also comes with a hologram readout and wrist comm pieces to attach to the left forearm, with each of those parts featuring two different types of stickers. The articulated hands also feature two additional index fingers, a straight pointing piece, and a slightly curved piece for the Ion Blaster's trigger. A magnetic component in his display stand's faction symbol activates the light-up features that illuminate his eyes and the Matrix. An additional sticker sheet and extra yellow-colored eye parts can be used to create a toy-accurate version of this kit.

:If one chooses, the middle-to-pinky fingers ''can'' be (carefully) sliced into individual pieces as they also feature individual ball joints for each finger.

{{-}}

===Defender Version===
{{Note|Every case before the 5th wave comes with a random Commemorative Card, with 10 Common, 1 Gold, and 1 Silver for each out of every 12 cards.}}
{{anchor|DefenderTruck}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-truck.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Vehicle''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''

:Released as part of the first ''Defender Version'' line of blind boxes, this ''Blokees'' kit of Optimus Prime is molded in his truck mode. The trailer hitch also comes with the Auto-Launcher from the Combat Deck, where it can be extended and wielded by other figures from the same line, allowing them to ride Optimus like an adorable little scooter. The Auto-Launcher can be detached from the bar, allowing the figure to be displayed as a regular-looking truck.

:The Combat Deck/Trailer and the Roller from the 5th wave can accommodate this kit, with the Auto-Launcher able to be mounted inside the trailer.

:This mold was also used to make [[Optimus_Prime_(SG)#SGDefenderVehicle|his Shattered Glass counterpart]].

{{-}}{{anchor|DefenderRobot}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-robot.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:This ''Defender Version'' kit of Optimus Prime is a 2.2-inch (5.5cm) figure, a few inches smaller than the ''Galaxy Version'' kits, but still articulated. Unlike his ''Galaxy Version'' kit, Optimus only comes with an Ion Blaster.

:Like most of the larger Galaxy Version kits, Optimus features a simple neck joint that is colored to match his optics, allowing it to be see-through from his head's eye holes. This mold was also used to make [[Ultra_Magnus_(G1)/merchandise#Defender_Version|Ultra Magnus]] and [[Optimus_Prime_(SG)#Defender_Version|Prime's Shattered Glass counterpart]].

{{-}}{{Anchor|SpecialGalaxyType}}
[[File:Blokees-TF-Defender-Ver-01-Special-Galaxy-Type-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Special Galaxy Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:One of the four chase figures of the line, the "Special Galaxy Type" Optimus Prime is a metallic redeco of the figure above, and he also features additional details to make him more accurate to the show. One chase variant is guaranteed per case, meaning this Optimus appears in five out of every twelve cases.

{{-}}{{Anchor|SpecialArmorType}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-100%-Firepower.jpg|thumb|250px|All of these armaments and yet he insists on crippling the 'Cons' joints without destroying them.]]
<ul class="iconlist">{{Bp-a1|'''Special Armor Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster, Forearm cannon, Wing pack

:The "Special Armor Type" version of the Optimus Prime kit is an alternate version of the Special Galaxy Type chase figure, decked out in metallic paint, and comes with additional armaments such as the forearm cannon and a wing pack that is based on the one used by his ''Cybertron'' namesake. Unlike the chase variant above, this Optimus has an '''''even''''' slimmer pull rate of '''1''' in every 144 boxes, or once per twelve cases.

{{-}}{{anchor|DV05Brilliant}}
[[File:Blokees-TF-DV05-SG-Brilliant-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Brilliant Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 05 - Traitor to Tyranny'''
:*''Accessories'': Energon Axe

:The fifth wave for the Defender Version kit comes with a translucent redeco of Optimus Prime, whose Ion Blaster is replaced with an Energon Axe. Additionally, he comes with one of the three random plastic commemorative coins (featuring etchings of Jetfire's head, Galvatron's head, and Jetfire's vehicle mode) in every case that contains the kit. Each coin is molded from translucent plastic and features a gradient pattern painted with gold.

:As with other clear-colored Brilliant/Glittering kits, the translucent plastic-molded ball-and-socket joints tend to be somewhat loose even when it's built out of the box, compared to the opaque and metallic kits.

{{-}}
===Blokees Wheels===
{{Note| Due to licensing-related reasons, this blind-box line was not released in the US market.}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''

:This 1/64-scale vehicle kit of Optimus Prime's truck mode is part of the new ''Blokees Wheels'' series of blind-boxed ''Transformers'' products. The design is based on Don Figueroa's interpretation of the character's Cybertronian truck mode, as seen in IDW's 2009 -2011 ongoing series. While everything else is molded in ABS plastic, the primary vehicle shell is made out of painted die-cast. Additionally, Optimus Prime features a universal Chassis Connector, which is used by all vehicle mode kits in the lineup, and the vehicle shell is capable of being opened for the chase kits' driver figures to interact with.

:This Optimus Prime has a pull rate of 1/24.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hologram Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with a slim pull rate of 5/144, the "Hologram Edition" Optimus Prime is a translucent redeco of the kit above. It includes an additional translucent blue driver minifigure, which is also designed to fit in the other vehicle kits.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Titanium Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with the slimmest pull rate of 1/144, the "Titanium Edition" Optimus Prime is a metallic redeco of the original kit, and he comes with the same driver figure from the Hologram Edition release of the kit.

{{--}}

==Combot==
[[File:Unix-Square-Combot-Optimus-Prime.jpg|thumb|300px|Autobots, Transf-I mean, Partsform and roll out!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories:'' 5 pairs of hands, Ion Blaster, Energon Axe, Energon Sword/Blaster Bayonet, Vehicle mode frame

:Produced by [[Unix Square]], a toy company based in Hong Kong, [[Combot]] Optimus Prime is an action figure approximately the size of a Voyager Class figure, and he features an impressive 50 points of articulation and includes a hefty amount of die-cast metal for a weighty premium feel, and light-up features for both the eyes and the Matrix of Leadership. In addition to his iconic Ion Blaster, Optimus also comes with a handheld Energon Axe and a live-action movie-inspired Energon Sword. The sword can also combine with the Ion Blaster to create a Bayonet.

:As the LED unit is wired on the neck, Optimus's head cannot swivel in a full 360 degrees.

:Unlike most non-Hasbro/Takara merchandise of the character on this page, Combot Optimus Prime can transform—albeit loosely defined due to licensing restrictions—into a stylized cab-over using full partsforming, while requiring the included vehicle mode frame.

{{-}}

==Auldey==
{{Note|All releases come with their respective trading cards.}}
[[File:Auldey-TF-AAE-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-001'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Optimus Prime is a 5-inch non-transforming but highly articulated action figure, and he comes with his additional pairs of hands and his signature ion blaster. Prime also features a removable chest window piece, which reveals an empty cavity for a future Matrix of Leadership accessory.

:As advertised in the box, the lineup had an 11/70 probability of getting Prime. This mold was also used to make [[Nemesis Prime (G1)#Auldey|Nemesis Prime]].

{{-}}{{anchor|auldeymetallic}}
[[File:Auldey-TF-AAE-Optimus-Prime-(Metallic).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Metallic Color)''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-000'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:The chase figure of the first lineup with a much slimmer 1/72 probability, this Optimus Prime is a redeco and retool of the figure above, featuring a toy-based deco and parts such as the head and legs. In addition, Prime also comes with a sheet of customer-applied stickers to complete the rest of his toy-accurate details, which include the chrome yellow-gold areas on his front hip.

{{-}}{{anchor|auldeyoptimal}}
[[File:Auldey-TF-AAE-Select-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Optimal Set''' (Alpha Action Elite Select, 2025)}}</ul>
:*''ID Number'': '''AAE-S 001'''
:*''Accessories:'' 16 pairs of hands, Ion Blaster, Energon Axe, Matrix of Leadership, Jet pack (with Blast effects), 2 pairs of alternate communication panels, display stand
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of Auldey's non-blindboxed "''Alpha Action Elite Select (AAE-S)''", a subline that also features re-releases of previous figures with more accessories and premium details, ''AAE-S'' Optimus Prime is a redeco and retool of the original AAE blindboxed figure. Deco-wise, Optimus features metallic paint on the red and blue plastic, along with some metallic silver details. He also comes with additional accessories, such as the Energon Axe, Megatron's pistol form, a jetpack with two Blast effects (also compatible with the Ion Blaster), an additional pair of interchangeable communication panels, and four extra pairs of hands that need trimming from their runners. Additionally, Optimus includes retooled areas and newly molded parts, such as a new neck joint that allows him to look up further, an opening chest window that grants access to his Matrix Chamber, and a display stand with an adjustable posing arm that plugs into multiple holes on his back and the soles of his feet for midair action poses.

:Optimus is also compatible with the Seeker-based back and the head from the same entry's Starscream, recreating the latter's disguise in [[Megatron's Master Plan, Part 1]].

{{--}}

==Ty==
* '''Beanie Bouncer Optimus Prime ''' (2025)
[[File:Bouncer-op.jpg|thumb|200px|If we want to get technical, this is actually [[Diac]].]]

:A bouncing ball covered in fur produced by Ty, creator of the more famous Beanie Babies and Beanie Boos. Optimus Prime's head crests are represented by additoinal pieces of felt material coming out of the ball. Opposite the face is an autobot symbol.

:Opitmus Prime is also available in a three set alongside Megatron and Bumblebee.

{{--}}

==Spin Master==
* '''4D Build, Transformers Optimus Prime 3D Model Kit with LED Lights, Transformers Collectibles & Desk Décor, Building Toys, 321 Pieces, 3D Puzzles, Gift Ideas for Ages 12 & Up''' {{sic}} (2025)
[[File:Op-spin-master-4d.jpg|thumb|200px]]

:A puzzle made of cardboard, with LED Lights, from the 4d Build Innovation Series. Optimus is depicted holding his ion blaster and staring off into the distance. The kit contains both Optimus's robot mode and alt mode. It was initially spotted in [[Costco]] stores in Fall of 2025.

:Most retailers have it listed as ''Transformers 4D Build Innovation Series Optimus Prime Model Kit''; however, [https://www.spinmaster.com/en-US/brands/4d-build/4-d-build-transformers-optimus-prime-3-d-model-kit-with-led-lights-transformers-collectibles-and-desk-decor-building-toys-321-pieces-3-d-puzzles-gift-ideas-for-ages-12-and-up/ the official Spin Master website] has it listed as above, SEO bait keywords included.

{{--}}

==References==
{{reflist}}
{{-}}
[[Category:Attacktix]]
[[Category:Combiners]]
[[Category:Decoys]]
[[Category:Generation 1 Autobots]]
[[Category:MyClone]]
[[Category:Robot Heroes]]
[[Category:Titanium Series]]
[[Category:Bitfig]]
[[Category:ULTIMATES!]]
[[Category:Transformers Character Card Autobots]]

File:Op-spin-master-4d.jpg

2025-10-30T00:00:41Z

Leia G: Stock image of the 4d Puzzle Innovation Series Optimus Prime from Spinmaster.

Stock image of the 4d Puzzle Innovation Series Optimus Prime from Spinmaster.

Megatron (G1)/merchandise

2025-10-27T17:12:05Z

Leia G:

{{suite}}
Peace through merchandising!

==Wireless Microphone==
[[File:MegsMicrophone.jpg|thumb|]]
* '''Megatron''' (Nasta, 1984)
:One of the earliest pieces of Megatron merchandise is also one of the strangest. Taking the form of Megatron's Walther P-38 gun mode — itself quite controversial and anachronistic due to [[For safety reasons|recent safety regulations]] — the microphone allows children to broadcast their voices to a nearby AM radio by pointing the gun at their mouth (at the rear sight, not the ''barrel muzzle'' at least) and speaking into it.

:'''''Seriously'''''.
{{-}}

==Collegeville Costumes==
{{anchor|Collegeville}}
[[File:Megatron collegeville costume.jpg|thumb|<insert questionable joke about package description here>]]
*'''Megatron''' (1984)
:Although [[Collegeville Costumes]] only released a small number of Transformers [[Halloween]] costumes, and made some odd choices for characters to depict in the process, Megatron was an obvious choice as one of their first releases. The costume consists of a thin plastic facemask based directly on the original Megatron toy's head, and a red and white plastic smock decorated not with the details of Megatron's body, but with his [[package art]] and the Transformers logo.
{{-}}

==Spindex Corporation==
[[File:Spindex megatron stationery.jpg|thumb|upright=1.66]]
*'''Megatron''' (eraser set, 1985)
:This two-pack of erasers from [[Spindex Corporation]] depicted Megatron in his robot and gun modes.
*'''Megatron''' (Character eraser, 1985)
:One of three different "character erasers" produced by Spindex, this small Megatron figurine came on either a red or purple blister card.
*'''Optimus Prime and Megatron''' (Pencil Toppers and Pencil, 1985)
:Small rubber figurines of Megatron and Optimus Prime came packaged with a pencil they could perch on the end of.
{{--}}
==Transformers Milk Caramel==
[[File:TFcaramel megatron.jpg|thumb]]
*'''Megatron''' (1985)
:A soft rubber figurine—known in Japan as a ''keshigomu''— of Megatron was released as part of the second wave of [[Kabaya]]'s ''[[Transformers Milk Caramel]]'' [[candy toy]] range. He came packaged with chocolate-covered caramel candies, and was available in red, blue and yellow.
{{-}}

==Transformers Gum==
[[File:TFGum megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (1985)
**''Accessories:'' High-density infra-red laser cannon
:A snap-together transformable model kit of Megatron was available as part of the second wave of Kabaya's ''[[Transformers Gum]]'' line. Essentially a downsized version of his original toy, the kit was made out of grey and black plastic, featuring stickers for detail, and came with a stick of gum. Like the original Japanese release of his toy, Megatron lacks his fusion cannon, armed merely with his infra-red laser cannon accessory.
{{-}}
==Hero Set==
[[File:HeroSet megatron keshi.jpg|thumb|upright=1.66]]
*'''Megatron''' (1985)
**''ID number:'' '''16'''
**''Accessories:'' Sword, high-density infra-red laser cannon
:A large ''keshigomu'' of Megatron was produced by TakaraTomy licensee [[Maruka Toys]]. Packaged on a blister card, the static, unposeable Megatron figure came with removable laser cannon and sword accessories, and featured a few small stickers for colour and detail. Maruka also produced an Optimus Prime figure in the same scale, and both Megatron and he were available in red, yellow or green.
{{-}}

==Decoy==
*'''Defeat Dinosaurer Strategy Game''' (board game, 1986)
*'''Destron Hero Collection 22''' (multi-pack, 1986)[[File:Decoy megatron.jpg|thumb]]

:Megatron was among the many characters rendered by [[TakaraTomy|Takara]] as part of their series of 1.5" ''keshigomu'' figurines. Like all the Decepticons in the series, Megatron was molded in soft purple rubber, and featured a number sculpted into his back that was the sum total of his [[Tech Spec]]s, for use in the various games that could be played with the figurines. As the figure is a Japanese creation, it's particularly notable for the fact that it lacks Megatron's signature fusion cannon, just as his original Japanese toy release did, instead sculpting him with his hand-held laser cannon and Japanese-exclusive sword.

:Megatron was available as part of a 22-piece box set of Decepticon figures, as well as being included as one of several possible random Decepticon figures included as playing tokens with the "Defeat Dinosaurer Strategy Game", and in a variety of different colours via "gachapon" capsule machines. Later, [[Seven]] made him available in a peach coloration, randomly included in a variety of multi-packs.

*'''Megatron''' (1987)
**''Decoy number:'' '''32'''

: The figurine was later brought over to [[Hasbro]] markets as part of the [[Decoy]] promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (32, in Megatron's case). Like all Decepticon Decoys, he was a randomly-chosen pack-in available with the carded [[Throttlebot]]s, [[Aerialbot (G1)|Aerialbots]], [[Protectobot (G1)|Protectobots]] and [[Technobot (G1)|Technobots]], and was, very early on in the promotion, available in an alternate red coloration that was only packed in with the Throttlebots. Unsurprisingly, this red figurine is much rarer.

::*''[http://www.tfu.info/1986/Decepticon/Decoys/Megatron/megatron.htm More information on Decoy Megatron at TFU.info]''

==Parody Deformed==
[[File:PDtype megatron.jpg|thumb]]
*'''Megatron''' (1990)

:A small non-transforming [[super deformed]] model kit of Megatron was available as part of Kabaya's "[[Parody Deformed]]" line of candy toys. The third figure in the series, Megatron was part of the larger class of kits, and as such is made from three colors of plastic (white, grey and blue) with eye and Decepticon symbol stickers for detail. He came with a "[[PDTF Comic]]" comic about himself—"Don't Cry! Megatron!!"—and a stick of chewing gum.
{{--}}

==''Generation 2''==
[[File:G2Megatron watch.jpg|thumb|upright=1.66]]
*'''Megatron Watch''' (Watch, 1995)

: A non-transforming digital wristwatch of Megatron's tank mode manufactured by [[Ostrum International]] was released during ''Generation 2'', in the same green and purple coloration as his first ''Generation 2'' toy.
{{--}}

===LALA===
*'''Megatron''' (1997)
:Released by [[ToonTown]] licensee LALA, this eraser also doubles as a small simple model kit, with his large colored bits being the "eraser" portion and the remainder of the toy being constituted of grey plastic parts that are assembled together. He transforms from robot to vehicle and back by [[Partformer|partforming]] his individual components.

:Although the promotional material for these releases feature his eraser bits in pink, it is possible that he might have also been released in bright green, as other LILA erasers that also show up as pink in promotional images have been found with this color instead.
{{-}}

==Choro-Q==
[[File:ChoroQ megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (2000)

:''[[Choro-Q]]'' Megatron is a ''Generation 2''-themed [[redeco]] of the Camouflage Tank toy from Takara's ''Choro-Q'' toyline of non-transforming super deformed vehicles. He was an [[exclusive]] at [[BotCon]] Japan 2000, and features a [[pull-back motor]] and a rear license plate that reads "BotCon Japan 2000".

:Along with ''Choro-Q'' [[Optimus Prime (G1)/merchandise|Optimus Prime]] and [[Mirage (G1)|Ligier]], Megatron was given out randomly to convention attendees. Each toy was limited to 1000 pieces.
{{-}}

==Super Collection Figure==
[[File:SCF Megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

: A three-inch tall [[plastic|PVC]] figurine of Megatron was available as part of the first wave of [[TakaraTomy|Takara]]'s ''[[Heroes of Cybertron|Super Collection Figure]]'' line. Like all the figures in the wave, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve [[blindpacking|blindpacked]] figures.

{{-}}{{anchor|SCFmace}}
[[File:SCF Megatron chase mace.jpg|upright=1.66|thumb]]
*'''Megatron with Chain Weight''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

:Also available in the first ''Super Collection Figure'' wave was a rare "[[Chase figure|chase]]" version of the Megatron (分銅付きメガトロン, ''fundō-tsuki megatoron''), decorated in metallic paint and replacing his right hand with his energon flail.

: It was ''presumably'' released at a ratio of one per every ten cases; while this has not been officially confirmed, later waves gave these odds for Secret Figures. It is also ''presumed'' to have replaced the regular Megatron in the lucky case (color or clear, well, that's less certain).

{{-}}{{anchor|SCFchaseConvoy}}
[[File:SCF Optimus chase jetpack.jpg|upright=1.66|thumb]]
*'''Megatron & Convoy''' (2000)
**''Act'': '''2'''
**''Accessories'': Stand

: The second ''Super Collection Figure'' wave featured an Optimus Prime chase figure wielding Megatron in gun mode and wearing [[Sideswipe (G1)|Sideswipe]]'s [[jet pack|rocket pack]] (the latter seen in the [[The Transformers (cartoon)|original ''The Transformers'' cartoon]] episode "[[More than Meets the Eye, Part 3]]").

: It was ''presumably'' released at a ratio of one per every ten cases. It is unknown what figure it replaced in the lucky case.

{{-}}{{anchor|SCFreincarnation}}
[[File:SCF Megatron Reincarnation.jpg|upright=1.66|thumb]]
*'''Reincarnation Megatron''' (2001)
**''Act'': '''3'''
**''Accessories'': Stand

:Megatron got another chase figure in the third ''Super Collection Figure'' Act. Based on the scene in ''[[The Transformers: The Movie]]'' where Megatron is reincarnated as [[Galvatron (G1)|Galvatron]], "Reincarnation Megatron" (転生メガトロン ''tensei megatoron'') is cast in transparent plastic with a light purple hue and gold sparkles inside, and given grid patterns on his lower body. It was presumably packed at a ratio of one per ten cases.

:It needs to be noted that there are a significant number of [[knockoff|bootlegs]] of this figure. Thankfully, most have a very obvious tell: the real figure has a white Decepticon symbol, while the knockoffs have a purple symbol.

{{-}}{{anchor|SCFLaserbeak}}
[[File:SCF Megatron Laserbeak.jpg|upright=1.66|thumb]]
*'''Megatron (B)''' (2001)
**''Act'': '''4'''
**''Accessories'': Stand

:For the fourth ''Super Collection Figure'' wave, Megatron's left arm was changed to feature [[Laserbeak (G1)|Laserbeak]] perching on it. His feet have also been painted bright white rather than the body-matching light gray of the original. Like all the figures in the fourth wave, Megatron was available in both standard full color and metallic silver "pewter" versions, one of each of which was available in a standard case of twelve [[blindpacking|blindpacked]] figures.

:The pewter version of the figure has a potential problem with connector peg breakage, due to said pegs often getting a layer of pewter paint before being forced into a socket, leading to sticking and tearing. Care should be used when moving or removing the arms; shaving down the socket interior with a thin hobby knife is usually sufficient to fix the issue. This holds true for pretty much every pewter figure in the entire line.

:In eight out of every ten cases, the pewter version of Megatron came packaged with the right arm of the collectible [[Metroplex (G1)#Super Collection Figure|Metroplex]] build-a-figure.

{{-}}{{anchor|Act6Convoy}}
[[File:SCF Optimus Act6.jpg|upright=1.66|thumb]]
*'''Convoy (C) with Megatron Gun Mode''' (2002)
**''Act'': '''6'''
**''Accessories'': Right fist, stand

:The sixth ''Super Collection Figure'' wave featured a [[retool]]ed version of Prime wielding Megatron's gun mode, now sold at mass-retail rather than being a chase figure. Unlike the chase one, Prime also came with an interchangeable empty fist, so he doesn't ''have'' to wield Megatron. His right arm has also been tooled to be straight-elbowed, and his left hand is now clenched. The figure was available in both full color and pewter versions in a 1:1 ratio per case.

:In eight out of every ten cases, the pewter version came with the head for the wave's [[Grand Maximus#Super Collection Figure|Grand Maximus]] build-a-figure.

{{-}}{{anchor|ConvoySet}}
[[File:SCF Optimus Earth Obliteration.jpg|thumb|upright=1.66]]
*'''Special "The Earth Obliteration Plan": Exclusive Convoy Set''' (2002)
**''Accessories'': Stand

: Available exclusively at the Wonder Festival convention, this set includes two metallic-paint versions of Convoy figures from Act 2: the "Convoy w/ Megatron Gun" chase figure (minus the jetpack), and the truck-mode "figure".

: The set was limited to only 1000 units.

{{-}}{{anchor|ConfrontationSet}}
[[File:SCF Megatron Confrontation.jpg|thumb|upright=1.66]]
*'''TF Confrontation Set 01: Convoy vs Megatron''' (2002)
**''Accessories:'' Energon mace

: Exclusive to the Tokyo Game Show 2002, this special set includes a new version of the original first-Act Megatron figure, along with a new version of the first-Act Optimus. Both are cast in transparent plastic and completely painted over in a grimy, battle-damaged look. Both also come with the interchangeable energon-axe and mace weapons from their first-wave chase figures. Completing the theme of the set is the backdrop of the packaging interior, which depicts [[Sherman Dam]].

: As with the Wonder Festival set, this set was also limited to 1000 units.
{{-}}

==Mega Super Collection Figure==
[[File:MegaSCF megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (2002)
**''ID number:'' '''03'''
**''Accessories:'' Fusion cannon, energon mace, Laserbeak, two clenched fists, two open hands
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

:A five-inch tall, non-transforming highly-articulated PVC figure of Megatron was the third entry in Takara's ''Mega Super Collection Figure'' series. He comes with a small PVC of Laserbeak that can perch on his arm, and his fists can be swapped out for alternate splayed-palm hands, or his energon mace, as seen in the Generation 1 cartoon.

{{anchor|MSCFmetallic}}
*'''Megatron Metallic Ver.''' (Exclusive, 2002)
**''ID number:'' '''03-X1'''
**''Accessories:'' Fusion cannon, energon mace, [[Buzzsaw (G1)|Buzzsaw]], two clenched fists, two open hands
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

:A metallic redeco of ''Mega SCF'' Megatron was offered as an exclusive at the 2002 Japanese conventions, Hobby Expo and Wonderfest. He comes with all the same accessories as his standard release, except for this exclusive, Laserbeak has been redecoed into Buzzsaw.
{{--}}[[File:MegaSCF megatron guns.jpg|thumb|upright=1.66]]

{{anchor|MSCFConvoy}}
*'''Convoy Metallic Ver.''' (2002)
**''ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
:A gun mode Megatron came as an accessory with the metallic redeco of the Optimus Prime ''Mega SFC'' figurine, taking the place of the [[energon-axe]] weapon included with the original Prime figure. Prime's hand is permanently sculpted around Megatron's handle, and can be swapped out for Prime's other hands.

{{anchor|MSCFStarscream}}
*'''Starscream''' (2002)
**''ID number:'' '''07'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
:Optimus Prime's Megatron gun accessory was redecoed for inclusion with ''Mega SCF'' Starscream; while Megatron himself remained the same, the fist was repainted from Prime's metallic dark blue to Starscream's lighter shade.
{{--}}

==Heroes of Cybertron==
[[File:HOC Megatron.jpg|upright=1.66|thumb]]
*'''Megatron''' (2002)

: Part of the first wave of ''[[Heroes of Cybertron#Heroes of Cybertron|Heroes of Cybertron]]'', this figure is functionally the same as the first ''Super Collection Figure'' Megatron. Like all the standard ''Heroes'' figures, he is cast in transparent plastic, then painted over, save for the eyes and a small patch on the back of his head, giving him a [[light-piping]] gimmick. However, there are a few other tiny deco differences, most importantly (and noticeable) being the addition of a black circle on the muzzle of his back-mounted gun barrel, and the back of his midsection is painted light gray rather than red like the ''SCF''. He's also a cooler super-light-gray than the ''SCF'' figure.

: There is a [[variant|running change variant]] of this figure, which adds a bit of red paint to the raised bit on the back of Megatron's fusion cannon, a detail from the animation model missing from the ''SCF'' Megatrons.

: Megatron was re-released in 2006 as part of a short-lived ''Heroes of Cybertron'' revival, celebrating the 2006 DVD release of the original ''[[The Transformers: The Movie]]''. This version was cast in opaque off-white plastic and is virtually identical to the original ''SCF'' Megatron, with the unpainted back-barrel and red-painted mid-back. At best, in certain lights the 2006 ''Heroes'' version is an ever so slightly warmer light gray plastic than the ''SCF''.

::*''[http://www.tfu.info/2002/Decepticon/HoCMegatron/megatron.htm More information on ''Heroes of Cybertron'' Megatron at TFU.info]''

{{-}}{{anchor|HOCmace}}
[[File:HOC Megatron Mace.jpg|upright=1.66|thumb|All flail Megatron]]
* '''Megatron''' (2002)

: Released in the second wave, this version of Megatron is a mass-release variation of the chase figure from the first ''SCF'' Act, replacing his right hand with a clear-plastic energy flail. His left hand is the clenched fist of the later "Laserbeak" version of Megatron, instead of the open-hand the chase figure had. This version also keeps the paint additions from the previous version of the figure, always having the red-dotted cannon.

: Oddly, he comes with the same collector card as the first version, and the packaging does not call out the energy weapon in any way. The card-back cross-sell even shows only the original Megatron. (The same happened to this wave's energy-weapon-wielding [[Optimus Prime (G1)/merchandise#Heroes of Cybertron|Optimus Prime]].)

::*''[http://www.tfu.info/2002/Decepticon/HoCMaceMegatron/megatron.htm More information on ''Heroes of Cybertron'' Megatron (with mace) at TFU.info]''

{{-}}{{anchor|HOCLaserbeak}}
[[File:HOC Megatron Laserbeak.jpg|upright=1.66|thumb|Give us a kiss.]]
* '''Megatron with Laserbeak''' (2003)

: The fifth-wave Megatron figure is a release of the Megatron/[[Laserbeak (G1)/toys#Heroes of Cybertron)|Laserbeak]] figure from the fourth ''SCF'' Act. He keeps the paint alterations of the energy-mace Megatron, though his black paint is much glossier this time around. Laserbeak's grays are also much lighter than on the SCF, matching Megatron's main body coloring.

: The collector card does not list Laserbeak on the front, but does mention him at the end of a severely truncated version of the first card's [[bio]].

: This release came with the right arm for the wave's collectible [[Metroplex (G1)#Heroes of Cybertron|Metroplex]] build-a-figure.
{{-}}

==Hard Hero==
[[File:HardHero Megatron bust.JPG|thumb|Englishmen, you're all so f@#$ing pompous. None of you have got any balls...[[Edmund Burton|wait a minute.]]]]
*'''Megatron''' (2002)
:The second of [[Hard Hero]]'s series of ''Transformers'' products, Megatron is a six-inch tall bust sculpted from cold-cast porcelain.
{{-}}
[[File:HHero MegatronStatue.jpg|thumb|People can pay retail for a [[Thrust (G1)#Generations|Thrust]] now!?!]]
*'''Megatron''' (2003)
:A 12.5-inch tall Megatron statue sculpted aiming his fusion cannon while screaming in rage.
{{-}}

==MyClone==
[[File:Myclone megatron.jpg|thumb|upright=1.66]]
* '''Megatron''' (MyClone, 2003)
**''ID number:'' '''MTF002'''
**''Accessories:'' Grey display base
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

:Released in the first wave of the ''[[MyClone]]'' line of Transformers PVC figures, this super deformed Megatron comes with a hexagonal grey display stand, which can link up with the identical stands included with other MyClone figures. His modular design allows his parts to be mixed and matched with those of any other MyClone figure.

* '''Megatron''' (MyClone, 2003)
**''Accessories:'' Clear display base, energon mace
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

: A [[chase figure|chase]] variant of ''MyClone'' Megatron was also available in the same wave. Cast entirely in colorless clear plastic, this version of Megatron also came with an energon mace, which could be exchanged for his fist. Thanks to the modular MyClone design, the mace can easily attach to the standard Megatron figure as well.
{{-}}

==Q-Robo Collection==
[[File:Qrobo megatron.jpg|thumb]]
*'''Megatron''' (2003)

:A super-deformed PVC of Megatron was released as part of the ''[[Q-Robo Collection]]''. Like all the figures in the series, Megatron was sold blindpacked in a plastic capsule, featured articulation in the neck and shoulders, and was also available in a translucent colored plastic: as a Decepticon, Megatron came in translucent purple.

::*''[http://snakas.web.fc2.com/figure/q_robo1.htm More information on the Q-Robo Collection at Autobase Aichi]''
{{-}}

==Generation 1 Figure-Collection==

[[File:Bottlecap megatron.jpg|thumb|upright=1.66]]

*'''Megatron''' (2003)
**''Japanese ID number:'' '''D-1'''
**''Accessories:'' Display base

:At only one inch in height, this Megatron "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's Transformers [[Generation 1 Figure-Collection]]. The figure was available in both a "retro" black and white color scheme and a rare full-color [[chase figure|chase]] version, and came with a leaflet, personalized with cartoon screen captures.
::*''[http://snakas.web.fc2.com/misc_item/kabaya_bottle.htm More information on the Generation 1 collection at Autobase Aichi]''
{{--}}
==History Collection==
[[File:History collection megatron.jpg|thumb|100px]]
*'''Megatron''' (2004)
**''Accessories:'' Display base

:A second "bottlecap" figurine of Megatron was produced by Takara as part of their blindpacked [[History Collection]] line of PVCs. Despite its diminutive size, this two-piece full-color figure features articulated shoulders.

::*''[http://tfkenkon.com/collection/act234/ More information on the History Collection at TFKenkon.com]''
{{--}}

==Palisades Toys==
[[File:Palisades Megatron.jpg|thumb|upright=1.66|Megatron after getting pushed down a flight of stairs by [[Skywarp (G1)|Skywarp]].]]
*'''Megatron''' (statue, 2004)
:A twelve-inch tall polystone statue of Megatron was produced by [[Palisades Toys]] as the logical second entry in their line of Transformers statues. Standing on a thick base formed from a silver Decepticon insignia, Megatron is decorated with dirt to simulate battle damage, and features articulation at and his neck and shoulders, allowing owners to position him with fusion cannon ready to fire. Megatron was limited to 1000 pieces worldwide.
::*''[http://www.tfw2005.com/transformers-images/toys/Non-Transforming+Transformers/Misc/Transformers+Busts+and+Statues/Palisades+12+Megatron+Statue/ Megatron statue gallery at TFW2005.com]''

* '''Megatron''' (mini-statue, 2005)

:A downscaled version of the Megatron statue, essentially identical to the larger one but for the fact that it's only six inches tall, was produced as an [[exclusive]] for [[San Diego Comic-Con]] 2005. With only 500 units produced, the statue sold out in two days, setting a new record for Palisades at the show.
{{-}}

==First 4 Figures==
[[File:First 4 Figures Battlefield Optimus vs Megatron.jpg|thumb|upright=1.66]]
*'''Optimus Prime vs Megatron''' (2006)
**''Accessories:'' extra head for Megatron (with detachable helmet), extra hand for Optimus Prime
{{toydesigner|[[Little IroN]] (concept artist), [["Mad" Alterton]] (sculptor), [[Leandro Sivori]] (painter)}}

:The first entry in the ''Transformers Battlefield'' line by model company [[First 4 Figures]], this 13-inch tall diorama depicts Optimus Prime slugging it out with Megatron. Megatron comes with a "REP" (Replaceable Exterior Part) of a battle damaged version of his head, which features a detachable "helmet" to show off his exposed robo-brain. Optimus is posed as though doing a shoulder shove while holding his ion blaster, but a provided REP hand allows buyers to instead recontexualise the pose as a spinning backhand slap.

:The model was limited to 1,850 pieces worldwide, and came with a numbered certificate of authenticity, which allowed buyers to reserve the same number on their next purchase in the series. It also came with an A4 mini-poster depicting the same fight between Optimus and Megatron by artist [[Little IroN]], which was also sold separately as a limited edition A2 poster.

:As a ''Transformers Battlefield'' release, this model featured a detailed base designed to interlock with others in the same range to create a massive battle diorama. Unfortunately, a general discontinuation of First 4 Figures' ''Transformers''-related output put the kibosh on any further ''Battlefield'' models.
{{-}}

==Diamond Select==

* '''Decepticon Motion Globe''' (Snow globe, 2007)
[[File:Diamond select megatron products.jpg|thumb|upright=1.66]]
:Megatron is featured in [[Diamond Select Toys]]' Decepticon-themed snow globe, sitting on a throne inside the globe whilst pointing with one hand and holding an [[energon cube]] in the other. The globe's base is based on [[Decepticon Headquarters (G1 Earth)|Decepticon Headquarters]] from the [[The Transformers (cartoon)|original ''The Transformers'' cartoon]]. It was sculpted by [[Art Asylum]], and limited to 1000 pieces.

* '''Megatron Mini Head Replica''' (Bust, 2007)
:This small statue of Megatron's head designed by Art Asylum stands at roughly five inches tall, and was limited to 2500 pieces.

* '''Megatron Wall Statue''' (2007)
:Standing at nine inches tall and limited to 1000 pieces, this statue of Megatron is a free-standing diorama that attaches to the owner's wall, complimenting Art Asylum's Optimus Prime wall statue.
{{--}}
[[File:Diamond select megatron busts.jpg|upright=1.66|thumb|Wonder if they used his legs to make another [[Alligaticon]]?]]
* '''Megatron Bust''' (2008)

:Released by Diamond Select Toys in 2008, this Megatron mini-bust was sculpted by Mark Wong of Art Asylum and limited to 1,500 pieces. The sculpt features a Megatron, looking regal in metallic silver, perched above a raised Decepticon symbol while the front of the bust showcases the [[Heart of Cybertron]] as seen in the Generation 1 episode "[[Microbots]]".

* '''Megatron Reformatted Bust''' (Action Figure Xpress exclusive, 2008)

:The Megatron bust was retooled for its second release as "Megatron Reformatted", exclusively availably through Action Figure Xpress, depicting the Decepticon leader in the beginning stages of his reformation into Galvatron as featured in ''The Transformers: The Movie''. In addition to his new partially-translucent appearance and battle-damage paint detail, this version of the bust features a new head and a new base in the shape of [[Unicron]].

* '''G1 Animated Megatron Bust''' (San Diego Comic Con exclusive, 2009)
:Mark Wong's Megatron bust was retooled a third time to create "G1 Animated Megatron", available exclusively at the 2009 San Diego Comic Con. In addition to his reinstated Heart of Cybertron base, Megatron features a new head and a more matte color scheme to better match the cartoon's palette.
{{--}}
[[File:DiamondSelect Megatron bustbank.jpg|thumb]]
*'''Megatron Bust Bank''' (Diamond Select, 2010)

:This 6-inch hollow Megatron bust would have featured plenty of space for coins along with articulation in its shoulders and neck, but was sadly canceled.
 
{{canceledtoy}}
{{-}}

==Attacktix==
*'''Megatron''' (Booster, 2007)
[[File:Attacktix Megatron.jpg|thumb|How am I supposed to aim with this thing in the way?]]
{{attacktix
|ID=TF2-20
|faction=Decepticon
|class=Leader
|special=Recover - 16/26 (61%) success ratio
|cost=40
|speed=6
|attacktype=Shooter (Force Blast)
}}
{{-}}
:Based on his G1 cartoon appearance, this Megatron toy is a killer. He was available only in the Series 2 Starter Set along with ''[[The Transformers (franchise)|Generation 1]]'' [[Optimus Prime (G1)/merchandise#Attacktix|Optimus Prime]], ''[[Transformers: Energon (franchise)|Energon]]'' [[Landquake (Energon)#Attacktix|Landquake]] and ''[[Transformers: Cybertron (franchise)|Cybertron]]'' [[Skywarp (Armada)#Attacktix|Skywarp]].

:Megatron has an incredibly powerful translucent missile (don't fire it at children or small dogs if you value their lives) and a ''Recover'' special power that allows the figure to stand back up if there's another Decepticon in play. Two Megatrons are a dangerous combination, feeding each other's recover powers and making them very hard to kill off. Plus you can pretend one of them is [[Straxus (G1)|Straxus]].

:As an added bonus, because of the way it is worded, you can use the ''Cybertron'' [[Megatron (Armada)/merchandise#Attacktix|Megatron]] vehicle mode figure's ''Transform'' power to bring Megatron into play from your back-ups.

::*''[http://www.tfu.info/2007/Decepticon/AttacktixMegatron/megatron.htm More information on ''Attacktix'' Megatron at TFU.info]''
{{-}}

==''Robot Heroes''==
[[File:Robot heroes megatrons.jpg|upright=1.66|thumb|Cuteness through tyranny!]]
*'''Ultra Magnus & Megatron''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|Marcelo Matere]] (concept artist)}}

:''[[Robot Heroes (toyline)|Robot Heroes]]'' Megatron is an adorably super-deformed figurine depicting the Decepticon leader aiming his fusion cannon with a great big smile on his mouth. Megatron has swivel articulation in his shoulders and was sold in a two-pack with [[Ultra Magnus (G1)/merchandise#Robot Heroes|Ultra Magnus]].
::*''[http://www.tfu.info/2007/Decepticon/RHMegatron/megatron.htm More information on Robot Heroes Megatron at TFU.info]''

{{anchor|RHBlindpack}}
*'''Megatron''' (Single-pack, 2008)

: In some countries outside of North America, Megatron was released individually in a blindpack with no notable changes.

{{anchor|RH5pack}}
*'''Decepticon Sneak Attack''' (Multi-pack, 2007)

: "Megatron with Supermetal Finish" is a redeco of the standard ''Robot Heroes'' Megatron, colored a shiny silver instead of off-white.

: He was only available in a [[Walmart]] exclusive five-pack alongside [[Mirage (G1)/toys#RH5pack|Hologram Mirage]], [[Cliffjumper (G1)/toys#Robot Heroes|Cliffjumper]], "Supermetal Finish" [[Optimus Prime (G1)/merchandise#RH5pack|Optimus Prime]], and [[Skywarp (G1)/toys#Robot Heroes|Skywarp]].

::*''[http://www.tfu.info/2007/Decepticon/RHWMMegatron/megatron.htm More information on Supermetal Finish Megatron at TFU.info]''
{{-}}

==Sota Toys==
*'''Transformers Chess Set''' (<s>2007</s>)
:A Megatron piece was to be the Decepticon-side King on a [[Chess#Sota Toys|chess set]] based on Generation 1, but the set apparently never saw release.
{{canceledtoy}}
{{-}}

==''Titanium Series''==
[[File:Titanium cancelled figure checklist.jpg|thumb|upright=1.67]]
*'''War Within Megatron''' (unreleased)
:*''Accessories:'' Decepticon stand?
:The final ''[[Titanium Series]]'' catalogue listed a number of "Micro Figures" intended for release, though many of them never saw the light of day. Among those listed was "War Within Megatron", which was presumably supposed to be a new 3" Robot Masters mold based on the character's appearance in the ''[[War Within (comic)|War Within]]'' comics, probably including a stand in the shape of a Decepticon badge.
{{canceledtoy}}
{{--}}

==Revoltech==
[[File:Revoltech Megatron.jpg|thumb|Action Masters? Eat your Spark out!]]
*'''Megatron''' (2007)
**''Yamaguchi Series number:'' '''025'''
**''Accessories:'' Alternate head, 3 alternate hands (left & right open palms, right gun-holding hand)

:A non-transforming but ''highly'' articulated Megatron action figure(ine), ''[[Revoltech]]'' Megatron uses the ''Revoltech'' "revolver joints" (appropriate, if you think about it...) for maximum poseability. Megatron includes a non-removable fusion cannon and a few alternate hands, as well as an alternate head with its mouth open in either a smirk, growl or sneer, [[Dull surprise|depending on how you read it]]. His sculpting is explicitly in the style of [[Pat Lee|Pat "serfdom" Lee]]'s interpretation of Megatron.

:This figure uses specialized gray revolver joints in order to better blend with the surrounding sculpted parts.

:He includes a hand obviously meant for holding a gun... but has no gun to use it with. Though if you buy ''Revoltech'' Starscream as well, you can always make him wield himself.
{{-}}

[[File:Revoltech Megatron gun.jpg|thumb]]
*'''Starscream''' (2008)
**''Yamaguchi Series number:'' '''046'''

:The [[Starscream (G1)/toys#Revoltech|''Revoltech'' Starscream]] toy included a Megatron accessory in his Walther P-38 altmode. While the silencer and scope are molded on, the stock is removable (necessary in order to plug it into a hand). The gun can be held by any ''Revoltech'' toy with a standardized gun-wielding hand, which includes all five Transformers characters in the line.
{{-}}

==Boss Coffee==
[[File:Boss coffee megatron.jpg|thumb]]
*'''Megatron''' (2008)

:A non-transforming PVC figure of Megatron was released as part of a promotion by [[Boss Coffee]]. The small figure was randomly included with single cans of the company's "Rainbow Mountain Blend" coffee, contained in a plastic capsule affixed to the top of the can which then became a display base for the figurine once removed. Megatron features articulation at the shoulders and waist and came with a small catalog leaflet that could be folded up and attached to the lid/base to form a diorama background of Decepticon Headquarters for added display value.

:Due to his size, Megatron hypothetically scales with ''Encore'' [[Metroplex (G1)#Encore|Metroplex]].

*'''Megatron''' (2008)

:A larger, metallic gold version of Megatron was also part of the promotion. Nearly twice as tall as the smaller figure, it was not merely an upsized version, but an entirely different sculpt. This Megatron was randomly included with two-packs of Rainbow Mountain Blend coffee cans, which featured a double-wide plastic capsule to hold him.
{{-}}

==''Mighty Muggs''==
[[File:MightyMuggs Megatron.jpg|thumb]]
*'''Megatron''' (2009)
**''Accessories:'' Fusion cannon

: This super-deformed, non-transformable Megatron figure uses the standard ''[[Mighty Muggs]]'' body template, with swivel joints in his neck and limbs. He comes with a similarly super-deformed version of his fusion cannon that fits into a hole on his right arm.
{{-}}

{{anchor|2018mightymugg}}
[[File:MightyMuggs 2018 Megatron.jpg|thumb|upright=1.44]]
*'''Megatron''' (2018)
**''ID number:'' '''02'''

: Part of the first year of the ''Mighty Muggs'' relaunch, Megatron features the new line-wide face-changing [[gimmick]]. Pressing down on his bucket helmet will switch his face to one of three options: neutral, angry, and [[The Transformers: The Movie|"I still function!"]] The toy is based on Megatron's [[evergreen]] design, and includes a matching fusion cannon molded onto his right arm.
{{-}}

==Transformers Wacky Wobblers==
[[File:WackyWobblers Megatron.jpg|thumb|upright=0.85]]
*'''Megatron''' (2009)

: This Megatron {{w|bobblehead}} is part of the popular ''[[Wacky Wobblers]]'' line produced by {{w|Funko}}. Aside from the standard-issue big wobbling head, he features a teeny-tiny fusion cannon and arms that swivel at the shoulders. Megatron is affixed to a base with his name on it.
{{-}}
==Transformers x Mimobot==
[[File:Mimobot megatron.jpg|thumb|upright=1.66|Peace through Storage!]]
*'''Megatron Mimobot''' (Mimoco, 2011)
:Produced by [[Mimoco]] as part of their multi-brand line of designer USB "Mimobot" flash drives, this Megatron memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.
{{-}}

==Cuponk==
[[Image:NYCC2011 Cuponk.jpg|thumb|250px|Not for use with liquid, so you can't get [[Microbots|get drunk on Energon]].]]
*'''Transformers Cuponk''' (2011)
:A New York Comicon exclusive, this set includes two Cuponk cups and 6 ping pong balls. Megatron is featured on one cup and one ping pong ball. The same cup also features [[Starscream (G1)|Starscream]], [[Soundwave (G1)|Soundwave]], [[Devastator (G1)|Devastator]], and the [[Autoscout]].
{{-}}

==Titan Warriors==
[[File:TitanWarriors Megatron.jpg|thumb]]
*'''Titan Warrior 5-Pack''' (2013)
:Available at [[San Diego Comic-Con]] 2013, this Megatron is a 6" PVC ''[[Titan Heroes|Titan Warriors]]'' figure (similar to Bandai's ''Ultra/Sentai/Rider Hero, Movie Monster Series'') with articulated arms. He was packed with [[Optimus Prime (G1)/merchandise#Titan Warriors|Optimus Prime]], [[Grimlock (G1)/toys#Titan Warriors|Grimlock]], [[Starscream (G1)/merchandise#Titan Warriors|Starscream]] and [[Soundwave (G1)/merchandise#Titan Warriors|Soundwave]].

*'''Megatron''' (Titan Warrior, 2014)
:The ''Titan Warriors'' Megatron toy was released individually, under the ''[[Beast Hunters (toyline)|Beast Hunters]] Titan Heroes'' subline.
{{-}}

==''The Loyal Subjects''==
*'''Megatron''' (2013)
{{charstubtoys}}
{{anchor|The Loyal Subjects Cybertron}}
*'''Cybertron Megatron''' (2013)
{{charstubtoys}}
{{anchor|The Loyal Subjects Metallic}}
*'''Metallic Megatron''' (2013)
{{charstubtoys}}
{{anchor|The Loyal Subjects Midnight}}
*'''Midnight Cybertron Megatron''' (2013)
{{charstubtoys}}
{{-}}

==Mecha Nations==
[[File:Mn02-blackconvoy-megs.jpg|thumb]]
*'''Black Convoy''' (2014)
**''ID Number:'' '''MN02'''
**''Accessories:'' Ion Blaster, Energon Axe, Removable Armor, Megatron gun, alternate hands.

:A small gun mode version of Megatron, similar to [[Megatron (G1)/toys#20th Anniversary/Masterpiece|those included with]] ''Masterpiece'' Soundwave and the original ''Masterpiece'' Optimus Prime/Convoy mold, was added to [[Kids Logic]]'s [[Nemesis Prime (G1)#Mecha Nations|Black Convoy]] redeco (and insignia-remold) of Mecha Nations [[Optimus Prime (G1)/merchandise#Mecha Nations|Optimus Prime]]. It includes light up effects, gun barrel that can be replaced with a barrel extension, and removable stock. To hold the gun, Black Convoy includes an additional specifically molded right hand, however the stock must be removed to allow him to do so.

:The Megatron gun was also included with Mecha Nations Starscream (below). Mecha Nations [[Ultra Magnus (G1)/merchandise#Mecha Nations|Ultra Magnus]], like Optimus Prime before him, does not include the Megatron gun, keeping this a Decepticon-only accessory.

{{-}}

[[File:Mn03-megatron.jpg|thumb]]
*'''Megatron''' (2014)
**''ID Number:'' '''MN03'''
**''Accessories:'' Energy flail, alternate face, alternate hands, alternate right forearm, display stand.

:Created by [[Kids Logic]], this [[super deformed]] G1 Megatron stands 6" tall and is articulated, featuring a shiny metallic color scheme, removable armor and replacement hands. He also features LED light up eyes, Decepticon chest insignia, and fusion cannon. The set includes an alternate right forearm piece allowing the fusion cannon and the forearm to which it's attached to be removed.

:This figure was redecoed into Mecha Nations Megatron 2014 Toy Soul Exclusive Edition (below).

{{-}}

[[File:Mn03g-goldmegatron.jpg|thumb]]
*'''Megatron (2014 Toy Soul Exclusive Edition)''' (2014)
**''ID Number:'' '''MN03G'''
**''Accessories:'' Energy flail, alternate face, alternate hands, alternate right forearm, display stand.

:Created by [[Kids Logic]], this [[super deformed]] G1 Megatron is a redeco of their previous Megatron figure (above), based on the color scheme of ''Masterpiece'' [[Megatron (G1)/toys#MasterpieceGoldMegs|Megatron Gold Ver]]. He stands 6" tall and is articulated, featuring a shiny metallic color scheme, removable armor and replacement hands. He also features LED light up eyes, Decepticon chest insignia, and fusion cannon. The set includes an alternate right forearm piece allowing the fusion cannon and the forearm to which it's attached to be removed.

:This figure was exclusive to 2014's Toy Soul expo, an event run annually in Hong Kong.

{{-}}

[[File:Mn05-starscream-megs.jpg|thumb]]
*'''Starscream''' (2015)
**''ID Number:'' '''MN05'''
**''Accessories:'' Megatron gun, alternate hands, display stand.

:Mecha Nations [[Starscream (G1)/merchandise#Mecha Nations|Starscream]] includes the same gun mode Megatron (above) as introduced with Black Convoy. A specially molded hand allows Starscream to hold Megatron for posing.

:Starscream was subsequently redecoed with new faces into Mecha Nations [[Skywarp (G1)/toys#Mecha Nations|Skywarp]] and [[Thundercracker (G1)/toys#Mecha Nations|Thundercracker]], but neither of the later figures included the Megatron gun.

{{-}}
==''Thrilling 30''==
*'''Megatron''' (Collectible Figurine, 2014)
**''Series / Number:'' '''1 / #2'''
**''Accessories:'' Collector's base
:A super-deformed Megatron was released among the blindpacked [[Thrilling 30#Collectible Figurines|''Thrilling 30'' Collectible Figurines]] by [[Goldie Marketing]]. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

*'''Collectible Figurines''' (5-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 5 collector's bases
:The same Megatron figurine was also available in a 5-pack alongside [[Optimus Prime (G1)/merchandise#Thrilling 30|Optimus Prime]], [[Ratchet (G1)/toys#Thrilling 30|Ratchet]], [[Starscream (G1)/merchandise#Thrilling 30|Starscream]] and [[Soundwave (G1)/merchandise#Thrilling 30|Soundwave]].

{{-}}

==Leg Avenue==
{{anchor|LegAvenue}}
[[File:Leg Avenue Megatron.jpg|right|upright=.75|thumb|]]
:Costume and lingerie manufacturer Leg Avenue released an officially licenced Bumblebee costume along side ones for [[Bumblebee (G1)/merchandise#LegAvenue|Bumblebee]] and [[Optimus Prime (G1)/merchandise#LegAvenue|Optimus Prime]].

{{-}}

==D-Style==
[[File:D-Style-Megatron.jpg|thumb|upright=1.66|Multiple faces to convey the various forms of tyranny.]]

*'''Megatron''' (2015)
**''ID number:'' '''44'''
**''Accessories:'' Scowling face, smirking face, shouting face, energon mace, Megatron gun

:A super deformed Megatron model kit was produced by [[Kotobukiya]] as part of their franchise-spanning ''[[D-Style]]'' line. His accessories include three interchangeable face plates, an energon mace and a representation of his gun mode that can be wielded by ''D-Style'' figures.

:There are a fewer paint apps than [[Optimus Prime (G1)/merchandise#D-Style|Optimus Prime]]. The eyebrows, two of the mouths and the silencer on the gun all require painting in black. In a change from the promotional photos opposite, Megatron's feet come in metallic, with the box images showing the center section on the feet highlighted with black.

{{-}}
==D-Collection==
[[File:D-Collection Megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (2015)
**''Accessories:'' Fusion cannon, sword

:[[Kabaya]]'s ''D-Collection'' Megatron is a small super deformed figure that requires some assembly for his arms and features articulation limited to his shoulders. He comes with an attachable fusion cannon and a purple energy sword. Sold blindpacked, Megatron is available as both a standard full color figure and a rare clear plastic version. He comes with chewing gum.

{{-}}
[[File:D-Collection Starscream.jpg|thumb|upright=1.66]]
*'''Starscream''' (2015)
**''Accessories:'' 2 null-ray blasters, Megatron gun

:A gun mode Megatron is included with the ''D-Collection'' [[Starscream (G1)/merchandise#D-Collection|Starscream]] figure as an accessory. The default Starscream comes with a fully painted Megatron, while the one included with the clear plastic version is completely black.

{{-}}

==''Metal Earth''==
[[File:Metal Earth Megatron.jpg|thumb]]
*'''Megatron''' (2015)
**''ID number:'' '''MMS303'''
:''[[Metal Earth]]'' Megatron is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".
{{-}}
[[File:Metal Earth Legends Megatron.jpg|thumb]]
*'''Megatron''' (Legends, 2019)
**''ID number:'' '''MEM054'''
:''Metal Earth Legends'' Megatron is a DIY 3D steel model kit in the shape of a super deformed version of the [[evergreen]] Megatron design. The kit's difficulty rating is given as "moderate".
{{-}}

==Hallmark Keepsake Ornaments==
[[File:Hasbro-transformers-megatron-ornament.jpg|thumb|upright=1.66|It's toy accurate.]]
*'''Megatron''' (July 11, 2015)
:Produced by Hallmark for the 2015 Christmas season, this ornament is sculpted based on the original Megatron toy in robot mode.

{{-}}

==Block Wars==
*'''Megatron''' (2016)
**''Number:'' '''3'''

:Part of [[Kabaya]]'s ''[[Transformers Block Wars]]'' candy toy line, this Megatron kit is based on his [[Megatron (G1)/toys#Cyber Series|Cyber Series Battalion toy]]. Molded in blue and grey plastic with detailing from stickers, he transforms into a tank when finished. He can also be taken apart and combined with ''Block Wars'' [[Optimus Prime (G1)/merchandise#Block Wars|Optimus Prime]], [[Bumblebee (G1)/toys#Block Wars|Bumblebee]] and [[Starscream (G1)/toys#Block Wars|Starscream]] in various configurations, the ones involving Megatron shown on the packaging being:

:*Giving Megatron's cannon and Starscream's wings to Optimus Prime.
:*Placing Megatron's turret on Prime's truck mode.
:*Giving Bumblebee Megatron's arms and Starscream's wings and arming him with Optimus Prime's spear.
:*Attaching Megatron's cannon and Starscream's wings to Bumblebee's vehicle mode, making him a flying death car.
:*Arming Megatron with Starscream's weapons and transforming him into a base/turret mode.
:*Attaching Prime and Starscream's legs to Megatron's vehicle mode to create a walking tank.
:*Combining Megatron and Starscream's vehicle modes into a jet-tank.
:*Combining all four into an unnamed combiner, with Megatron forming the right leg and providing his cannon as a handgun.

==Bitfig==
[[File:Bitfig-Part-1.jpg|thumb|]]
*'''Megatron''' (12–2016)
:Part of the first wave of Transformers Bitfig capsule toys by [[TakaraTomy A.R.T.S.]], Megatron's design is inspired by his appearance in the G1 cartoon, and is articulated at the neck and shoulders. Bitfig toys were packaged in capsules color coded to the toy they contained.
{{-}}

==Prime 1 Studio==
===''Premium Masterline''===
[[File:TF-Premium-Masterline-PMTF-02-Megatron.jpg|upright=1.55|thumb|"As Prime said, this design would've shut [[GEEWUN|you]] [[True fan|people]] up if [[Paramount Pictures|th]][[Michael Bay|ey]] decided to use this design."]]
*'''Megatron''' (2017)
**''ID Number'': '''PMTF-02''' / '''02EX''' (exclusive)
**''Accessories'': Base, Energon sword (exclusive), Energon mace (exclusive)

:[[Prime 1 Studio]] ''Premium Masterline'' Megatron is a ''massive'' non-transforming statue based on his Generation 1 appearance with a blend of live-action film aesthetic, with LED light on his eyes and fusion cannon. The statue was also designed by [[Josh Nizzi]] himself. If customers had purchased the statue at [https://www.sideshowtoy.com/collectibles/transformers-megatron-transformers-generation-1-prime-1-studio-9028261/ Sideshow's website], they would receive exclusive sword and mace accessories, which can be attached to Megatron's left hand.

:The standard version was limited to 1000 pieces, while the exclusive version was limited to 500 pieces.

{{-}}{{anchor|P1SGold}}
[[File:TF-Premium-Masterline-PMTF-02GL-Megatron-Gold-Edition.jpg||upright=1.55|thumb]]
*'''Megatron Gold Version''' (2018)
**''ID Number'': '''PMTF-02GL'''
**''Accessories'': Base, sword

:Limited to 350 pieces, Megatron Gold Version is a redeco of the statue above, evoking his Electrum-coated appearance in the Generation 1 episode "[[The Golden Lagoon (episode)|The Golden Lagoon]]". He also comes with a sword accessory.
{{-}}

===''Age of Time''===
[[File:Prime1StudioSuperiorMegatron.jpg|upright=1.55|thumb]]
*'''Superior Megatron''' (<s>201?</s>)

:''Age of Time'' Superior Megatron was designed to be the "ultimate amalgamation" between G1 and movie [[Megatron (Movie)|Megatrons]], specifically taking cues from Megatron's appearance in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]''.

:For reasons unknown, this figure was silently canceled.
{{canceledtoy}}

{{-}}
===''Cutie1''===
[[File:Cutie1 Megatron Figure.jpg|upright=1.11|thumb]]
*'''Megatron''' (2022)
**''ID Number'': '''No:056'''
**''Accessories'': Stand

:A striking departure from previous Prime 1 Studio offerings, ''Cutie1'' Megatron is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

{{anchor|Cutie1keychain}}
*'''Megatron''' (Keychain, 2021)
**''Accessories'': Stand, chain

:Part of a marketing push following the announcement of the figure above, an acrylic keychain of ''Cutie1'' Megatron was released, along with other products such as stickers, T-shirts, hand towels and totebags using the design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.

{{anchor|Cutie1Set}}
*'''Nemesis Prime & TR Silver Megatron Set''' (2-pack, 2023)
**''Accessories'': Stand

:''Cutie1'' "TR Silver Megatron" is a metallic silver redeco of the regular figure with yellow eyes instead of red. He comes in a set with [[Nemesis Prime (G1)#Cutie1|Nemesis Prime]].

{{-}}{{anchor|P1SWFC}}

===''War for Cybertron Trilogy''===
[[File:Prime-1-Studio-WFC-Megatron.jpg|upright=1.66|thumb]]
*'''Megatron''' (<s>2022</s>)
**''ID Number'': '''PMTF-06''' / '''06UT''' (Ultimate Version)
**''Accessories'': Base (standard), base with Omega Supreme (Utimate Version)

:A statue based on Megatron's appearance in the ''[[Transformers: War for Cybertron Trilogy (cartoon)|War for Cybertron Trilogy]]'' cartoon. The exclusive version includes a defeated [[Omega Supreme (G1)#Prime 1 Studio|Omega Supreme]] as part of the statue's base.

:This item was canceled due to the combination of rising production costs and insufficient preorders.
{{canceledtoy}}
{{-}}

==My Busy Books==
[[File:TF-My-Busy-Books-Transformers-Megatron-figurine.jpg|upright=1.66|thumb|At least one of your nerd parents would complain that I'm not a <s>gun</s> upside down Submarine on this one.]]
*'''Transformers: My Busy Book''' (2017)
:Available with the [[Transformers: My Busy Book|10-page board book]] and a box filled with 12 figurines & a playmat depicting a destructed city & Cybertron, this Megatron is a pair of small, PVC non-transforming figurines consists of his robot and his tank alternate mode, which was based on his [[evergreen]] design. Like most of the land-based vehicle figurines, his treads do not roll.

:Since his tank turret is made out of softer plastic, it tends to droop down occasionally.
{{--}}

==Kidrobot==
[[File:Kidrobot GIJoe Enamel Pin Series.jpg|thumb|250px]]
===Enamel Pin Series===
*'''Megatron''' ([[November 3]], [[2017]])
:*''Rarity:'' 1 in 20
:Released by [[Kidrobot]] in their Enamel Pin Series, this is a flat, enamel pin badge of Megatron inspired by the art of [[Tom Scioli]]'s ''[[Transformers vs. G.I. Joe]]'', albeit with [[Super deformed|cutesy proportions]]. Megatron's design throughout Kidrobot's merchandise features his [[Energon mace]] coming out of the end of his [[fusion cannon]]. The pin series was [[Blindpacking|blindboxed]], with some pins being rarer than others.
{{--}}

===Vinyl Mini Series===
[[File:Kidrobot GI Joe Megatron mini.jpg|thumb|upright=1]]
*'''Megatron''' ([[November 14]], [[2017]])
:*''Rarity:'' 2 in 24
:*''Accessories'': [[Grimlock (G1)|Grimlock]]'s head
:The same character design was reused for the Vinyl Mini Series, with Megatron receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. Megatron featured articulation in each shoulder, and even included the macabre accessory that is Grimlock's severed beast mode head, as claimed by Megatron in "[[Everybody Hates Metroplex]]".
{{--}}

===Medium Figure Series===
[[File:Kidrobot GI Joe Megatron medium.jpg|thumb|upright=1]]
*'''Megatron''' ([[November 14]], [[2017]])
:*''Accessories'': Grimlock's head
:This "art figure" of Megatron, released in the Medium Figure Series, followed the same design, now blown up to seven inches; some painted-on details of its smaller incarnation were now rendered as part of the sculpt. In addition to articulated shoulders, Megatron now also featured a turning head. Grimlock's severed head was also included as an accessory, and his Energon mace, previously molded in a static position, was now made with a linked chain.

:Unlike the rest of Kidrobot's ''Transformers vs. G.I. Joe'' line, the Medium Figure Series were sold in open-faced boxes.
{{-}}
{{anchor|kidrobotpurple}}
[[File:Kidrobot GI Joe Megatron medium exclusive.jpg|thumb|upright=1]]
*'''Megatron''' ([[November 14]], [[2017]])
:*''Accessories'': Grimlock's head
:Released at the same time as the standard version, this variant of Megatron was limited to 200 pieces and exclusive to the Kidrobot online store. Megatron is now decoed in a lighter grey, replacing most of his charcoal paint with purple. It's not a particularly comic accurate colour scheme—it could match the banquet scene in "[[Earth: R.I.P.]]" if you really squint—but then neither was [[Cobra Commander#kidrobotblack|Cobra Commander's exclusive variant]], so it's probably fine.
{{--}}

===Vinyl Keychain Series===
[[File:Kidrobot GI Joe Megatron keychain.jpg|thumb|upright=1]]
*'''Megatron''' ([[December 1]], [[2017]])
:*''Rarity:'' 3 in 24
:Megatron was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation. Like the enamel pin, there's no Grimlock head in sight.
{{-}}

==Threezero==
===Premium===
*'''Megatron - Classic Edition''' (<s>2017</s>)

:A Premium Scale Collectible Figure of Megatron was revealed by [[3A]] alongside their [[Optimus Prime (G1)/merchandise#Threezero|Optimus Prime]], but never saw release.
{{canceledtoy}}

{{anchor|ThreezeroWFC}}
===DLX===
====''War for Cybertron Trilogy''====
*'''Megatron''' (DLX Scale, 2021)
**''Accessories:'' TBA
{{charstubtoys}}
{{-}}

===MDLX===
[[File:Threezero-MDLX-Megatron.jpg|thumb|upright]]
*'''Megatron''' (2023)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one fusion cannon, one back-mounted cannon, three pairs of hands (closed, relaxed, pointing right & open left)
:[[Threezero]]'s third original MDLX figure, this version of Megatron is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Megatron is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and accessories, namely his fusion and back cannons. The three pairs of hands he comes with are closed fists, relaxed splayed-open hands, and a pointing right & open left hands. The fusion cannon barrel can either swap out for the back one or be combined together for maximum fusion.

::*''[https://www.threezerohk.com/product/mdlx-megatron/ More information on MDLX Megatron at Threezero]''
{{-}}
{{anchor|MDLXComic}}
[[File:MDLX-Megatron-Comic-Book-Edition-Proto.jpg|thumb|upright]]
*'''Megatron (Comic Book Edition)''' (2023)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one fusion cannon, one back-mounted cannon, three pairs of hands (closed, relaxed, pointing right & open left)
:A redeco of the above MDLX figure in a deco inspired by his [[Megatron (G1)/Marvel Comics continuity|appearance in the old Marvel comics]]. Accessories, functionality and the like are all otherwise identical. Furthering the homage, his package art is loosely based off of [[Power Play!|the cover for ''Power Play!'']].

::*''[https://www.threezerohk.com/product/mdlx-megatron-comic-book-edition/ More information on MDLX Megatron (Comic Book Edition) at Threezero]''
{{-}}

{{anchor|MDLXG2}}
[[File:Threezero-MDLX-Megatron-G2-promo.jpg|thumb|upright]]
*'''Megatron''' (2023)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one fusion cannon, one back-mounted cannon, three pairs of hands (closed, relaxed, pointing right & open left)

:Another redeco of Megatron in his [[Transformers: Generation 2 (toyline)|''Generation 2'']] [[Megatron (G1)/toys#Generation 2|attire]], neon camouflage and all. As such, all the aforementioned accessories and features carry over to this release.

:In a cute touch, his all of his product photos provided by Threezero are styled after the packaging of the G2 toyline.

::*''[https://www.threezerohk.com/product/mdlx-megatron-g2-universe/ More information on MDLX Megatron (G2 Universe) at Threezero]''
{{-}}

{{anchor|MDLXVintage}}
*'''Megatron''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one fusion cannon, one back-mounted cannon, three pairs of hands (closed, relaxed, pointing right & open left)

:Yet another redeco of Megatron, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

:Vintage Animation Edition Megatron, [[Bumblebee (G1)/merchandise#MDLXVintage|Bumblebee]] and [[Optimus Prime (G1)/merchandise#MDLXVintage|Optimus Prime]] were revealed in a [https://newsroom.hasbro.com/news-releases/news-release-details/40-years-one-legacy-hasbro-celebrates-transformers-40th press release] from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

::*''[https://www.threezerohk.com/product/mdlx-megatron-vintage-animation-edition/ More information on Megatron (Vintage Animation Edition) at Threezero]''
{{comingsoontoy}}
{{-}}

==Bouncing Ball Heads==
[[File:BouncingBallHead Megatron.jpg|upright=1.22|thumb]]
*'''Megatron''' (2017)
:"Bouncing Ball Head" Megatron is a small, super deformed figurine with a removable head that doubles as a bouncy ball. A Decepticon logo is tampographed on the back of his head and his name is written under his feet.

:He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique light gray color.

:Despite clearly representing Generation 1 characters, the collection is advertised as a 2015 ''[[Transformers: Robots in Disguise (2015 franchise)|Robots in Disguise]]'' product.
{{-}}
==Forever Clever==
{{anchor|jumbochalk}}
*'''4 Pack Jumbo Chalk Set''' (2018)
:Released by [[Forever Clever]], the 4 Pack Jumbo Chalk Set includes a chalk holder featuring Megatron. He's bundled with chalk holders of [[Optimus Prime (G1)/merchandise#Jumbochalk|Optimus Prime]], [[Bumblebee (G1)/merchandise#Jumbochalk|Bumblebee]] and [[Soundwave (G1)/merchandise#Jumbochalk|Soundwave]], and 4 pieces of appropriately colored chalk.
{{anchor|shapechalk}}
*'''5 Pack Shaped Chalk''' (2019)
:A piece of gray chalk formed into the shape of Megatron. Bundled with [[Optimus Prime (G1)/merchandise#shapechalk|Optimus Prime]], [[Bumblebee (G1)/merchandise#shapechalk|Bumblebee]], [[Starscream (G1)/merchandise#shapechalk|Starscream]] and [[Windblade (G1)#shapechalk|Windblade]].
{{anchor|WallWalker}}
*'''Wall Walkers Megatron''' (2018)
:Exclusively released in [[Blindpacking|blind bags]], ''Wall Walkers'' Megatron has suction cups on its hands and feet so it can stick to walls. All its details are printed on, and besides its colors and printing, it is identical to the other Wall Walkers toys.
{{anchor|MiniWalker}}
[[File:MysteryMiniWalkers.jpg|upright=1|thumb]]
*'''Mystery Mini Walkers Megatron''' (2021)
:Also a blind bag exclusive, ''Mystery Mini Walkers'' Megatron is an eraser-like figure with movable arms and legs and printed-on details.
{{-}}

{{anchor|ClipCharms}}
[[File:ForeverCleverClipCharms.jpg|upright=1|thumb]]
*'''Clip Charms Megatron''' (2024)
:Released in blind bags, ''Clip Charms'' features a keychain of Megatron's face, with his name above.
{{-}}
{{anchor|KeyBlasters}}
[[File:Keyblasters.jpg|upright=1|thumb]]
*'''Key Blasters''' (2024)
:A toy car released as part of the ''Key Blasters'' series features Megatron on its side and hood. A key is included. When it is inserted into the car, pushing the button on the key will propel the car forward. It was sold in a two-pack with a [[Grimlock (G1)/toys#KeyBlasters|Grimlock]] themed car.
{{-}}
===Squeezelings===
*'''Megatron''' (Series 1, 2022)
:''[[Squeezelings]]'' Megatron is a [[super deformed]], non-posable figure made of soft plastic, released by [[Forever Clever]]. He was released in [[blindpacking|blind bags]] and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

{{-}}{{anchor|SqueezelingsBlackout}}
*'''Blackout Color Mode Megatron''' (2022)
:A [[black redeco]] of the previous Megatron figure. It was exclusive to an 8-figure gift set, featuring [[Optimus Prime (G1)/merchandise#Squeezelings|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings|Bumblebee]], [[Starscream (G1)/merchandise#Squeezelings|Starscream]], [[Megatron (G1)/merchandise#Squeezelings|Megatron]], and Blackout Color Mode versions of the three other characters.

{{-}}{{anchor|Squeezelings2}}
*'''Megatron''' (Series 2, 2023)

:A figure of Megatron in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongside [[Optimus Prime (G1)/merchandise#Squeezelings2|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings2|Bumblebee]] and [[Optimus Primal (BW)/toys#Squeezelings|Optimus Primal]], in blind bags, or on blister card individually. He was later rereleased as a part of Squeezelings Sidekicks, with a pack-in comic.

==Imaginarium Art==
[[File:ImaginariumMegatron.jpg|upright=1.66|thumb|"When we slip this credit card charge for a $1300 statue into the Autobots' account, the Autobots will be overdrawn forever!" "NOOOOOOO--!"]]
*'''Megatron''' (2018)
**''Accessories'': Energy flail

:[[Imaginarium Art]]'s Megatron statue stands 25 inches tall atop a base of [[Ironhide (G1)|Ironhide]]'s dead body. The eyes and fusion cannon can light up. Only 500 were produced.
{{-}}

*'''Megatron''' (2019)

:"Legacy of Cybertron" Megatron stands a mere 20 inches tall and is posed holding an energon cube above his head. The base of the statue can combine with others in the LoC series to produce a larger battle scene. 500 were produced.

*'''Starscream''' (2022)

:This 29-inch-tall statue is a [[BigBadToyStore]] exclusive, and features Starscream (with light-up eyes) standing on Megatron's deactivated head. Only 130 were produced.
{{-}}

==McDonald's==
[[File:2018-McD-Authentics-Bumblebee-Megatron.jpg|upright=1.22|thumb]]
*'''Megatron''' (Happy Meal Toy, 2018)
:Released as part of the [[McDonald's]] June 2018 Happy Meal Toys along with [[My Little Pony]], this Megatron is a [[super deformed]] toy. He has a wind-up walking [[gimmick]].

:This toy was rereleased in the US as [[Megatron (Movie)/toys#McDonald's 2|Megatron]] for the ''[[Bumblebee (franchise)|Bumblebee]]'' promotion.
{{-}}

==''Keshi Surprise''==
*'''Decepticons''' (2018)

:The ''[[Keshi Surprise]]'' series by [[Super7]] consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980s [[Decoy]]s. These [[blind-packed]] figures were sold individually or in cases depicting only their faction. Megatron was available in red, orange, blue, and purple and included a foil trading sticker.
{{-}}

==Transformers Trading Card Game==
[[File:W1MegatronDL.jpg|thumb]]
*'''Megatron, Decepticon Leader''' (2018)
**'''Wave 1'''
**''Rarity: '''''CT'''
**''Card Number: '''''T26/T40'''
**''Stars: ''10
:Megatron, Decepticon Leader is one of forty double-sided character cards available in Wave 1 of the [[Transformers Trading Card Game]].

{{-}}
[[File:W1MegatronLW.jpg|thumb]]
*'''Megatron, Living Weapon''' (2018)
**'''Wave 1'''
**''Rarity: '''''RT'''
**''Card Number: '''''T27/T40'''
**''Stars: ''13
:Megatron, Living Weapon is one of forty double-sided character cards available in Wave 1 of the [[Transformers Trading Card Game]].

:The artwork for the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile game.
{{-}}
[[File:W2Megatron.jpg|thumb]]
*'''Megatron, Arrogant Ruler''' (2019)
**'''Wave 2: Rise of the Combiners'''
**''Rarity: '''''CT'''
**''Card Number: '''''T29/T46'''
**''Stars: ''10
:Megatron, Arrogant Ruler is one of forty-six character cards released in Wave 2 of the [[Transformers Trading Card Game]], Rise of the Combiners.

:Line-art for both Bot and Alt Mode was drawn by [[Dan Khanna]]. The Alt Mode artwork is based on the [[Combiner Wars (franchise)|Combiner Wars]] Leader Class Megatron toy.

{{-}}
[[File:W2SMegatronCT.jpg|thumb]]
*'''Megatron, Cybertronian Tyrant''' (2019)
**'''Wave 2S: Bumblebee vs. Megatron Starter Set'''
**''Rarity: '''''RT'''
**''Card Number: '''''T02/T04'''
**''Stars: ''7

:Megatron, Cybertronian Tyrant was released as part of the Transformers Trading Card Game's Bumblebee vs. Megatron Starter Set. The card was packaged alongside [[Bumblebee (G1)|Bumblebee]], Least Likely, Most Dangerous, [[Starscream (G1)|Starscream]], Decepticon Lieutenant, [[Windblade (G1)|Windblade]], Defender of Truth, and a 40 card ready-to-play deck of Battle Cards.

:The cards Alt Mode artwork is based on the [[Combiner Wars (franchise)|Combiner Wars]] Leader-Class Megatron toy. Line-art for both Alt and Bot Mode was drawn by [[Dan Khanna]].
{{-}}
[[File:W3GeneralMegatron.jpg|thumb]]
*'''General Megatron, Infantry-Leader''' (2019)
**'''Wave 3: War for Cybertron: Siege I'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T06/T48'''
**''Stars: ''13

:General Megatron, Infantry-Leader is one of forty-eight double-sided character cards available in Wave 3 of the [[Transformers Trading Card Game]], War for Cybertron: Siege I.

:The card's artwork is based on the ''[[War for Cybertron: Siege|Siege]]'' Voyager-class Megatron toy, with the Bot Mode artwork being reused from the toy's packaging art.
{{-}}
[[File:W4LordMegatron.jpg|thumb]]
*'''Lord Megatron, Conqueror of Cybertron''' (2019)
**'''Wave 4: War for Cybertron: Siege II'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T08/T52'''
**''Stars: ''12

:Lord Megatron, Conqueror of Cybertron is one of 52 character cards released in Wave 4 of the [[Transformers Trading Card Game]], War for Cybertron: Siege II.

:The card's artwork is based on the ''Siege'' Megatron toy. The Alt Mode artwork is was drawn by [[Marcelo Matere]] with colors by [[Volta]]
{{-}}
[[File:EEMegatron.jpg|thumb]]
*'''Megatron, Living Weapon''' (2019)
**'''Wave 1: Energon Edition'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T03/T06'''
**''Stars: ''13

:Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Megatron, Living Weapon. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art by [[Marcelo Matere]].
{{-}}
[[File:W5Megatron.jpg|thumb]]
*'''Megatron, Fallen Hero''' (2020)
**'''Wave 5: Titan Masters Attack'''
**''Rarity: '''''UT'''
**''Card Number: '''''T27/T46'''
**''Stars: ''11

:Megatron, Fallen Hero is one of forty-six double sided character cards released as part of Wave 5 of the [[Transformers Trading Card Game]], Titans Masters Attack. As a character with a body mode, Megatron begins the game with a Titan Master attached in head mode. Once Megatron is KO'd, said Titan Master is deployed.

:The card's artwork is based on the ''[[Titans Return (franchise)|Titans Return]]'' Megatron toy, with the body mode artwork being reused from the toy's packaging art and original alt mode artwork based on the toy's tank mode (line art by [[Ken Christiansen]]).

:This card's set was originally set for an April 2020 release, however due to the global COVID-19 pandemic the release was pushed back to May 29, 2020.

{{-}}

==''Super Cyborg''==
[[File:SuperCyborgMegatron.jpg|thumb|"Megatron has a clear chestplate? I, STARSCREAM, AM NOW THE LEADER!"]]
*'''Megatron''' (2019)
**''Accessories'': Torso plate

:Produced by [[Super7]], ''Super Cyborg'' Megatron is an 11-inch-tall non-transforming figure with 7 points of articulation. Its main distinguishing feature is that the entire front of the robot torso is removable, exposing sculpted mechanical details within his body.

*'''Megatron (clear)''' (2019)
**''Accessories'': Torso plate

:The transparent plastic version of this figure was exclusive to [[San Diego Comic-Con]] 2019.

*'''Megatron (Purple Grid)''' (2019)
**''Accessories'': Torso plate

:This [[New York Comic Con]] 2019 exclusive redeco features translucent purple to represent Megatron's reformatting in the animated movie.

*'''Good Bye Megatron''' (2023)
**''Accessories'': Torso plate

:This San Diego Comic-Con 2023 exclusive is a particularly deep cut, though a slightly misguided one. Meant to evoke the uncommon [[:File:G1toy gb megatron.jpg|"Good Bye" version of the original Megatron toy as released only in Japan]], it now features darker grey base plastic with new interior blue highlights. However, those blue highlights were ''not'' on the original "Good Bye Megatron" toy at all - they were only on its [[package art|box art]], which had been left over from the earlier standard release of the Japanese Megatron toy.

{{-}}

==ReAction==
*'''Megatron''' (2020, 2024)

: Released in the first wave of [[Super7]]'s line of multi-property 3.75-inch "retro" action figures, ''[[ReAction]]'' Megatron is a non-converting 3 3/4-inch action figure based on his appearance in the original cartoon, with 5 points of articulation (swivel neck, shoulders, hips) and holes in his feet for use with some variety of stand. Where most ''ReAction'' figures come with a separate accessory, Megatron's [[fusion cannon]] is permanently affixed to his right arm.

: As with all releases in the ''ReAction'' toyline, Megatron comes packaged on a small cardback that emulates the nostalgic packaging style of [[Kenner]]'s ''[[Star Wars (franchise)|Star Wars]]'' action figures from the late 1970s to early '80s.

: In late 2024, this figure was reissued with no obvious changes, now in a [[blindpacking|blindpacked]] box assortment (''see more on this below'').

{{-}}{{anchor|ReActionCyberchrome}}
*'''Cyberchrome Megatron''' (2020)

: This version of Megatron features a shiny metallic paint job. Whee.

: This figure was a [[Target]] exclusive in the US, released alongside the "[[Optimus Prime (G1)/merchandise#ReActionCyberchrome|Cyberchrome Optimus Prime]]" figure.

{{-}}{{anchor|ReActionMC12}}
*'''MC-12 GunRobo P-38''' (2020)

: As a special "[[Black Friday (event)|Black Friday]]" exclusive, ''ReAction'' Megatron got a [[black repaint]] meant to represent his [[Micro Change|pre-Transformer "GunRobo" body]]... albeit with a standard Decepticon symbol.

: This figure was only available through Super7's website.

{{-}}{{anchor|ReActionChromeCommander}}
*'''Chrome Commander Megatron''' (2021)

: The second Target-exclusive Megatron figure has a deco based on the [[Megatron (G1)/toys#The Transformers|original 1984 Megatron toy]], featuring shiny metallic paint on the "chrome" parts, red inner boots and the "swirly" chestplate markings.

: This figure was released alongside the first "[[Optimus Prime (G1)/merchandise#ReActionFallenTarget|Fallen Leader Optimus Prime]]" Target-exclusive figure. The gray one.

{{-}}{{anchor|ReActionGolden}}
*'''Megatron (Golden Lagoon)''' (2022)

: The third [[Target]]-exclusive Megatron figure, this one has a head-to-toe golden deco, depicting his appearance in "[[The Golden Lagoon (episode)|The Golden Lagoon]]".

: This figure was released alongside the similarly-decoed [[Optimus Prime (G1)/merchandise#ReActionGolden|"Golden Lagoon" Optimus Prime]] figure.

{{-}}{{anchor|ReActionFallenEvolution}}
*'''Fallen Evolution Megatron''' (2022)

: The ''fourth'' Target-exclusive version of Megatron, this version is done in translucent purple plastic to represent the beginning of his reformatting scan in the ''[[The Transformers: The Movie]]''.

: This figure was released alongside the thematically-similar full-color/open-chest [[Optimus Prime (G1)/merchandise#ReActionFallenTargetColor|"Fallen Leader" Optimus Prime]] figure.
{{-}}

*'''Transformers''' (2024)

: Several of the wave 1 ''ReAction'' figures were reissued in 2024 in [[blindpacking|blind box]] packaging. The only new figure in the assortment was a [[chase figure]] of Megatron now cast in translucent pink.

{{-}}

*'''Ark Base''' (Playset, 2024)

: The ''ReAction'' Ark Base playset included a Megatron figure seemingly identical to the very first release listed above.
{{-}}

==Flame Toys==
===Furai Model===
[[File:FlameToys-FuraiModel-06-MegatronIDW.jpg|upright=1.66|thumb]]
*'''Megatron (IDW Autobot ver.)''' (July [[2019]])
**''Number:'' '''06'''
** Accessories: 2 sets of alternative hands
:''Furai Model'' Megatron is a highly articulated snap-together model kit (no glue required!) by [[Flame Toys]], based on the [[:File:RageRage-Megatronappears.jpg|IDW Autobot design]] by Alex Milne, as seen in ''[[The Transformers: More than Meets the Eye|More than Meets the Eye]]''. Molded in PS and ABS plastic with polycaps for the joints, Megatron features a number of stickers for detailing but doesn't require much in the way of paint for a complete look, being molded in all the appropriate colors straight out of the box. The finished kit is Voyager-sized in height.

:If one chooses, the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers like ''Gundam Markers'' can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.
{{-}}

{{anchor|FuraiModelDecepticon}}
[[File:Furai-Model-Megatron-(IDW-2005-Decepticon-Ver).jpg|thumb|upright=1.66]]
*'''Megatron (IDW Decepticon ver.)''' (May [[2020]])
**''Number:'' '''14'''
** Accessories: 2 sets of alternative hands
:A redeco/retool of Megatron (IDW Autobot ver.). The key differences are a Decepticon insignia sticker and a slightly more dour face sculpt. Well, that's about it.
{{-}}

{{anchor|FuraiModelG1}}
[[File:FlameToys-FuraiModel-MegatronG1.jpg|upright=1.66|thumb]]
*'''Megatron (G1 ver.)''' (December [[2024]])
** Accessories: 2 additional pairs of alternative hands, 1 pair of forearm covers

:A third snap-together model kit by [[Flame Toys]] of Megatron, based on his appearance in the G1 cartoon. Aside from his hands, Megatron also comes with a pair of forearm cover panels that allow him to be displayed without the Fusion Cannon, or mount onto the left arm.

{{comingsoontoy}}
{{--}}

===Kuro Kara Kuri===
[[File:FlameToys-KuroKaraKuri-05-Megatron.jpg|upright=1.66|thumb]]
*'''Megatron''' (January, 2021)
**''Number:'' '''05'''
**''Accessories:'' 2 faces, 3 rifles, weapon case (exclusive), roaring face (exclusive)
**''Sculptor'': Yuki Onoda
**''Painting by'': Decomas Lab (Hiroyuki Hirose)

:Released by [[Flame Toys]] as part of their Kuro Kara Kuri line, A high-end non-transforming figure based on the [[:File:IDWongoing15 megatrons new body.jpg|IDW stealth bomber design]] by Don Figueroa featuring die-cast parts and 7 LEDs. He comes with two interchangeable faces and three different rifles which combine into one long rifle. If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a weapons case and additional roaring face.
{{-}}

==Daiki Kougyou==
[[File:Daiki-Kougyou-Megatron-Water-Gun.jpg|upright=1.66|thumb|Raining Pain.]]
*'''Megatron Water Gun''' (2021)
**''Accessories'': Silencer, stock, telescopic sight

:Manufactured by Daiki Kougyou, this Megatron water gun (yes, really) is based on his show-accurate pistol alt-mode, complete with silencer and stock. The prototype is sculpted by ''Model Works Grenade''. The gun's size is slightly larger than the original G1 toy. Unlike the said toy, the gun's muzzle must be removed first to attach the silencer.

:Megatron was available as a limited order item, where Japanese customers had until November 27, 2020 to reserve their copy. The item was shipped for buyers on February 2, 2021.

{{-}}

==''R.E.D. [Robot Enhanced Design]''==
[[File:TF-R.E.D.-Megatron.jpg|upright=1.66|thumb]]
*'''Megatron''' (2020)
**''Accessories'': Fusion Cannon, Energon Mace, 4 additional hands
{{toydesigner|[[Emiliano Santalucia]] (concept artist)}}

:Released as part of the first wave of the ''[[Transformers R.E.D.]]'' line, Megatron is a non-transforming 6-inch action figure akin to the ones from Hasbro's ''[[Marvel Comics|Marvel]] Legends'' and ''[[Star Wars (franchise)|Star Wars]] The Black Series'' lines. He features 23 points of articulation and extensive paint operations for [[show-accuracy]].

:Megatron comes with a whopping ''five'' interchangeable left hands: a closed fist, a hand to hold weapons or accessories (not included), a pointing hand, an open hand for gesturing, and a hand permanently molded to an [[Energon cube]]. His right fist is also removable; both wrists are compatible with his [[Energon mace]] accessory. His Fusion Cannon however cannot be removed from his right forearm.

:Unfortunately, Megatron's harder, unpaintable joints are prone to photodegradation.

:As with all ''R.E.D.'' toys, Megatron was a Walmart exclusive in Canada and the United States, and was later made available on [[Hasbro Pulse]] in limited quantities.

{{-}}
{{anchor|ReformattingMegatron}}
[[File:TF-R.E.D.-Reformatting-Megatron.jpg|upright=1.66|thumb|The perfect companion to your "[[Galvatron (G1)/toys#War for Cybertron Trilogy|Behold, Galvatron!]]"]]
*'''Reformatting Megatron''' (2021)
**''Accessories'': Fusion Cannon, Energon Mace, 4 additional hands

:The fourth wave of ''R.E.D.'' saw a redeco of Megatron, now cast mostly in translucent purple plastics and with a gridline deco to represent his [[reformatting]] into [[Galvatron (G1)/Generation 1 cartoon continuity|Galvatron]] by [[Unicron/Generation 1|Unicron]] in ''[[The Transformers: The Movie]]''. He retains all of his previous points of articulation and accessories.

:Like his previous ''R.E.D.'' toy, Megatron was a Walmart exclusive, with limited quantities available on Hasbro Pulse.

{{-}}
{{anchor|REDshockwave}}
[[File:RED-Shockwave.jpg|upright=1.66|thumb]]
*'''Shockwave''' (2022)

:The [[Shockwave (G1)/toys#R.E.D. .5BRobot Enhanced Design.5D|Shockwave]] figure included in the sixth wave of ''R.E.D.'' includes a handheld accessory of Megatron in pistol mode, complete with scope, silencer, and stock. Shockwave also comes with a pair of [[Fire Blast effect]]s that are compatible with this Megatron.
{{-}}

==Jada Toys==
===''Metalfigs''===
[[File:JadaMetalfigsG1DioramaScene.jpg|upright=1.44|thumb]]
*'''Diorama Scene''' (2 3/4" Die Cast Figure 4-pack, 2020)
**''Accessories'': Display backdrop
:Released by [[Jada Toys]], a static die-cast figurine of Megatron measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongside [[Optimus Prime (G1)/merchandise#DioramaScene|Optimus Prime]], [[Bumblebee (G1)/merchandise#DioramaScene|Bumblebee]] and [[Starscream (G1)/merchandise#Jada Toys|Starscream]].

:The packaging backdrop can be used as an additional display piece for the set.

{{-}}{{anchor|4inMetalfigs}}
[[File:JadaMetalfigsG1Megatron.jpg|upright=1.44|thumb]]
*'''Megatron''' (4" Die Cast Figure, <s>2021</s>)
**''Accessories'': Fusion cannon, Energon mace
:''Metalfigs'' Megatron is a 4 inches tall non-transforming super deformed die-cast figure with three points of articulation and light-up eyes. He comes with his signature fusion cannon and Energon mace weapons as accessories.

:Originally scheduled for a July 2021 release, it ended up being silently canceled.
{{canceledtoy}}

{{-}}{{anchor|Metalfigs4pack}}
*'''Optimus Prime / Bumblebee / Optimus Primal / Megatron''' (2 3/4" Die Cast Figure 4-pack, 2022)
:This static Megatron figurine is directly designed after the unreleased 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongside [[Optimus Prime (G1)/merchandise#Metalfigs4pack|Optimus Prime]], [[Bumblebee (G1)/merchandise#Metalfigs4pack|Bumblebee]] and [[Optimus Primal (BW)/toys#Metalfigs|Optimus Primal]].

{{-}}{{anchor|Metalfigssingle}}
*'''Megatron''' (2 3/4" Die Cast Figure, 2023)
:The same super deformed Megatron from the 4-pack above is also available in individual packaging.

{{-}}

===''Nano Metalfigs''===
[[File:JadaNanoMetalfigsG1-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 1 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:''Nano Metalfigs'' Series 1 Megatron is an incredibly small die-cast figurine molded doing an action pose. He has a little base attached to his feet for balancing reasons.

:He comes in an impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{anchor|NanoMetalfigs2}}
*'''Transformers Series 3 18-pack''' (4 cm Die Cast Figure Multipack, 2023)
:''Nano Metalfigs'' Megatron was re-released with no noticeable changes in ''another'' impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{--}}

==Figural Bag Clip==
[[File:FiguralBagClip Megatron.jpg|upright=1.22|thumb]]
*'''Megatron''' (2020)
:Released by [[Monogram]], this 2.5" 3D foam bag clip takes the form of a chibi evergreen Megatron.

:It was available only as part of a [[Blindpacking|mystery blind bag]] collection.
{{-}}
[[File:FiguralBagClip 2021 Megatron.JPG|thumb]]
*'''Megatron''' (2021)
:A non-articulated, non-transforming 3" figure of Megatron with an attached clip, also released by Monogram.

:Unlike the previous year's release it was sold on a standard cardback.

{{-}}

==''Pop!''==
[[File:Funko Pop Megatron G1.jpg|thumb|upright=1.44]]
*'''Megatron''' (2021)
**''ID number:'' '''24'''

:Released as part of the ''Pop! Retro Toys'' segment, [[Funko Pop!|Funko]]'s ''Pop!'' Megatron is a super deformed vinyl figure based on his original Generation 1 toy, though the head is much more cartoon-accurate.

{{-}}{{anchor|PopGIJoe}}
[[File:Funko Pop Mystery Box Megatron Duke GI Joe.jpg|thumb|upright=1.44]]
*'''Funko Mystery Box: Transformers vs. G.I. Joe''' (Giftset, 2021)
**''ID number:'' '''45'''

:Available only as part of a GameStop exclusive giftset, this retooled Megatron comes with his Energon mace attached to his right arm instead of his fusion cannon and comes [[Blindpacking|blindpacked]] inside a ''Transformers vs. [[G.I. Joe (franchise)|G.I. Joe]]''-themed lunch box alongside a ''Pop!'' [[Duke (G.I. Joe)#Pop!|Duke]] figure, a ''G.I. Joe'' logo decal, an Autobot logo keychain, and a set of four pins of Megatron, Duke, [[Optimus Prime (G1)/merchandise#Pop!|Optimus Prime]] and [[Cobra Commander#Pop!|Cobra Commander]].

{{-}}{{anchor|PopKeychain}}
[[File:Funko Pocket Pop Keychain Megatron.jpg|thumb|upright=1.11]]
*'''Megatron''' (Pocket ''Pop!'' Keychain, 2021)

:A smaller version of the regular ''Pop!'' Megatron with a keychain attached to his head.

{{-}}{{anchor|Digital Pop!}}
*'''Megatron''' ([[Funko Pop!#Digital Pop! NFTs|Digital ''Pop!'']], 2022)
**''Rarity:''
***''Monochrome:'' '''Common'''
***''Static:'' '''Common'''
***''Glowing:'' '''Uncommon'''
***''Chrome:'' '''Rare'''
***''Original:'' '''Epic'''
:{{W|Non-fungible token|NFT}}s depicting Megatron in the Funko style. Megatron also appears in gun mode in all of [[Starscream (G1)/merchandise#Digital Pop!|Starscream's NFTs]].
<center><gallery heights=200>
File:TRANSFORMERS_COMMON_MEGATRON_MONOCHROME.gif
File:TRANSFORMERS_COMMON_MEGATRON_STATIC.gif
File:TRANSFORMERS_UNCOMMON_MEGATRON_GLOW.gif
File:TRANSFORMERS_RARE_MEGATRON_PURPLECHROME.gif
File:TRANSFORMERS_EPIC_MEGATRON_ORIGINAL.gif|Peace Through Right-clicking!
</gallery></center>

{{-}}{{anchor|Pop! Pin}}
[[File:Funko-Pop-Pin-Megatron.jpg|thumb|upright=1.44]]
*'''Megatron''' (''Pop!'' Pin, 2022)
**''ID number:'' '''15'''
**''Accessories:'' Display stand
:A metallic enamel pin based on Megatron's vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

{{-}}{{anchor|Fundays}}
*'''Freddy Funko as Megatron''' (2023)
**''ID number:'' '''SE'''

:Exclusive to a Funko-oriented event called Fundays 2023, this regular-sized vinyl figure portrays [[Freddy Funko]] cosplaying as Megatron. The body of this figure is the same as the regular Megatron, while the head has been modified to incorporate Freddy's face. This figure features a metallic finish and was limited to 500 pieces.

{{-}}{{anchor|Pop40Years}}
*'''Megatron''' (2024)
**''ID number:'' '''132'''

:Released in celebration of the 40 years of the franchise, this regular sized ''Pop! Retro Toys'' Megatron is a similar mold to the original release, but is doing a different pose.

{{-}}{{anchor|Pop40Years2Pack}}
*'''Optimus Prime & Megatron''' (2-pack, 2024)

:A Hot Topic exclusive release of the 40th anniversary [[Optimus Prime (G1)/merchandise#Pop40Years2Pack|Optimus Prime]] and Megatron vinyls with a metallic finish to their paintings.
{{--}}

==Modern Icons==
[[File:Modern_Icons_Megatron_helmet.jpg|thumb|upright=1.66|We'll let this image speak for itself.]]
*'''Megatron Modern Icons Replica Helmet''' (December 27, 2021)
:A collaboration between Hasbro and statue and replica brand Modern Icons, this is a wearable helmet for adult collectors, based on Megatron's head. It features light-up eyes and authentic sounds and phrases.

:Originally due for release on August 13, 2021, the Megatron helmet was delayed until December 27 (as was [[Optimus Prime (G1)/merchandise#Modern Icons|its Optimus Prime counterpart]]). The helmet is a GameStop exclusive in the United States.
{{--}}

==''Zōteki''==
[[File:ZOTEKI-025-Megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' ([[2021]])
**''ID number'': '''025'''

:A collaboration between [[Hasbro]] and statue/replica brand [[Jazware]], ''[[The Transformers (franchise)|The Transformers]]'' was added as a part of the ''[[Zōteki]]'' line alongside other iconic brands such as [[Marvel Comics|Marvel]], to recreate some of the main "Generation 1" characters. The 25th figure of the ''Zōteki'' line; Megatron wields his iconic [[Fusion cannon]].

:Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
{{--}}

==Eaglemoss==
[[File:EaglemossChess Megatron.jpg|upright=1.11|thumb]]
* '''Transformers Gen-1 Chess Set''' (<s>2021</s>)
:In the planned [[Chess#Eaglemoss|Transformers Chess Set]] by [[Eaglemoss]], a relatively large and very well detailed statue of Megatron was slated to be the standard King piece on the Decepticon side.

:A Kickstarter campaign to raise the necessary funds for this project was launched, but failed to meet its goal by September 24, 2021 and the whole thing was canceled.
{{canceledtoy}}
{{-}}

==e-HOBBY==

===''Transformers Character Card''===
{{anchor|TCC G1}}
[[File:Transformers Character Card G1 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Convoy & Megatron Set''' ([[January 25]], [[2022]])
**''ID number:'' '''01 & 02'''
{{toydesigner|[[Shin Sasaki]] (illustration)}}

:Released as part of the first wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Optimus Prime (G1)|Optimus Prime]] (with [[Roller (G1)|Roller]]) and Megatron (with [[Starscream (G1)|Starscream]], [[Thundercracker (G1)|Thundercracker]] and [[Skywarp (G1)|Skywarp]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#02|Translation of G1 Megatron's Transformers Character Card]]''
{{-}}

{{anchor|TCC G2}}
[[File:Transformers Character Card G2 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Battle Convoy & Megatron Set''' ([[March 14]], 2022)
**''ID number:'' '''11 & 12'''

:Released as part of the second wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime and Megatron in their ''[[Transformers: Generation 2 (franchise)|Generation 2]]'' bodies along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Megatron is specifically depicted as the [[Megatron (G1)/toys#Hero|Hero Megatron]] toy.
::*''[[Source:Transformers Character Card#12|Translation of G2 Megatron's Transformers Character Card]]''
{{-}}

{{anchor|TCC Black}}
[[File:Transformers Character Card Megatron Black and Convoy Black.jpg|upright=1|thumb]]
*'''Transformers Card Binder (includes 2 special cards)''' ([[November 1]], 2022)
**''ID number:'' '''EX'''

:Released in its fifth wave as something of a "season one finale" to the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this 40-slot binder intended to contain the entire ''Character Card'' series thus far is packed with a pair of holographic trading cards depicting super-deformed art of Optimus Prime and Megatron in the forms of their first e-HOBBY exclusive toys along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Megatron is specifically depicted as ''the'' first e-HOBBY exclusive toy, ''[[The Transformers: Collector's Edition|Collector's Edition]]'' "[[Megatron (G1)/toys#Collector's Edition|Megatron Black Version]]."
::*''[[Source:Transformers Character Card#EXM|Translation of Megatron Black Version's Transformers Character Card]]''
{{-}}

{{anchor|TCC Action}}
[[File:Transformers Character Card Action Master Megatron and OP.jpg|upright=1|thumb]]
*'''Convoy (Action Master) & Megatron (Action Master) Set''' ([[December 28]], [[2024]])
**''ID number:'' '''93 & 94'''

:Released as part of the thirteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Armored Convoy]]) and Megatron (with [[Neutro-Fusion Tank]]) in their [[Action Master]] forms along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#94|Translation of Action Master Megatron's Transformers Character Card]]''

{{-}}

{{anchor|TCC Decepticon}}
[[File:Transformers Character Card Unicron and Decepticons.jpg|upright=1|thumb]]
*'''Destron Army and Unicron Set''' (December 28, 2024)
**''ID number:'' '''99 & 100'''

:Released as part of the thirteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of the Generation 1 [[Decepticon]]s (as represented by Megatron, [[Soundwave (G1)|Soundwave]], [[Laserbeak (G1)|Laserbeak]], [[Starscream (G1)|Starscream]], [[Shockwave (G1)|Shockwave]], [[Stranglehold]], and [[Banzai-Tron (G1)|Banzai-Tron]]) and [[Unicron]] along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#99|Translation of the Decepticons' Transformers Character Card]]''

{{--}}

===Acrylic keychain series===
[[File:E-Hobby Megatron and Starscream keychains.jpg|upright=1|thumb]]
*'''Megatron & Starscream''' ([[October]], [[2022]])

:Released as part of the first wave of an [[e-HOBBY]] exclusive series, this pair of keychains depicts character art and assets re-used from Megatron and [[Starscream (G1)|Starscream's]] [[The Transformers: Masterpiece|''Masterpiece'']] releases, namely [[Megatron (G1)/toys#MP36|MP-36 Megatron]] and [[Starscream (G1)/toys#MP52|MP-52 Starscream Ver. 2.0]] respectively.

{{--}}

==ULTIMATES!==
*'''Megatron''' (2023)
**''Accessories'': Regular head, control helmet head, Energon-drinking head, antimatter chest, laser sword, blaster, Kremzeek, 6 hands, hand with Energon cube, chemical flask, [[Pearl of Bahoudin]], 2 energy maces

: Part of the second wave of ''[[Transformers ULTIMATES!]]'' from [[Super7]], Megatron is an 8-inch-tall non-transforming figure. Despite his retro look, he has ''way'' more articulation than the original, including multi-directional joints at the neck, shoulders, wrists, hips, and ankles; plus swivel biceps, elbows, knees, and a bit of ab crunch. He even has an opening chest with pictures of antimatter cubes behind it, as seen in the end of the [[The Transformers (cartoon)|original cartoon]] episode "[[Roll for It]]". His hands pop out at the wrists so they can be replaced with his additional spare hands or other accessories.

: Among said accessories are some that have by now been included frequently with Megatron figures, such as his energy mace (here provided with both straight and curved chain versions), the blaster and laser sword from ''[[The Transformers: The Movie]]'', as well as [[Kremzeek]]. More innovative accessories include an alternate head with the control helmet from "[[Prime Target (episode)|Prime Target]]", a half-empty energon cube and drunkenly-grinning alternate head meant to represent the drinking scene in "[[Microbots]]", the Pearl of Bahoudin from "[[Trans-Europe Express]]", and the chemical flask that Megatron is shown throwing at [[Gregory Swofford]] in "[[The Return of Optimus Prime, Part 1]]" (deep cut!).

: Preorders for Megatron (and the rest of Wave 2) opened on [[July 29]] 2021, and closed on [[August 27]], with the toys slated for shipping in summer 2022... a vague date Super7 missed by a full year.

{{-}}{{anchor|UltimatesG2}}
[[File:Ultimates_G2_Megatron.jpg|upright=1.66|thumb|Voice of Doom and [[Galvatron (BW)|Galvatron]] Action Figure not included.]]
*'''Megatron''' (2023)
**''Accessories'': Sword, fusion cannon (toy), fusion cannon (comic), gun (toy), 2 guns (comic), alternate head (toy), alternate head (comic), alternate head (G1 design), 2 fists, 2 sword-holding hands, 2 gun-holding hands, 2 trigger hands, bullet bandolier

: The second ULTIMATES! Megatron figure, released in the line's third wave, depicts him in his ''[[Transformers: Generation 2 (franchise)|Generation 2]]'' tank body. Aside from the toy-accurate tank-cannon and handgun and standard suite of alternate hands, he comes with a number of accessories and alternate parts based on his appearances in the [[Transformers: Generation 2 (Marvel)|''Generation 2'' comic]]: a "G1"-styled alternate head and purple "G1" fusion cannon (as he was almost invariably drawn with those rather than a toy-accurate head and cannon), a screaming blue-faced version of the "G1" head to replicate [[:File:Final_Transformations_Megatron_kills_Override.jpg|the panel]] where he kills [[Override (G1)|Override]] from [[Final Transformations|''G.I. Joe'' #142]], the massive gun he holds on the cover of [[All or Nothing!|issue #2]], his sword from the cover of [[Escalation!|issue #8]], the pistol he used in the "Because I'm an '''idiot''', that's why!" panel from [[Total War!|issue #10]], and a bullet bandolier because why not.

: Preorders for G2 Megatron (and the rest of Wave 3) opened on [[December 1]], 2021, with the toys projected to ship in fall 2022... and ''actually'' shipping in November 202''3''.

{{-}}{{anchor|UltimatesStarscream}}
*'''Starscream''' (2023)
**''Accessories'': 2 arm cannons, 2 alternate heads, 2 fists, 2 gripping hands, open palm right hand, grasping left hand, claw, energon cube, Megatron gun, blaster rifle

: The wave-4 non-ghost ''ULTIMATES!'' [[Starscream (G1)/merchandise#ULTIMATES!|Starscream]] includes multiple accessories, among them a Megatron in classic gun mode.

: Preorders opened on [[June 8]] 2022, with toys purportedly shipping the following May.

{{-}}{{anchor|UltimatesReformatting}}
*'''Reformatting Megatron (2023)
**''Accessories'': Normal reformatting head, damaged reformatting head, 2 fists, 2 open hands, 2 trigger hands, 2 expressive hands

: This version of ''ULTIMATES!'' Megatron depicts him during his reformatting scan in [[The Transformers: The Movie|the animated movie]], now in purple plastic with extensive wireframe deco. He has an alternate head depicting its battle-damaged appearance while still being in purple "scan" mode - an appearance Megatron never actually had in the film.

: He comes with a ''lot'' fewer accessories than most other figures in the line. Granted, the sequence in question was not exactly one where he really had any, but still.

:Preorders were open until [[January 13]], 2023, with the toys purportedly shipping the following Fall, which turned out to mean March 2024.
{{-}}

<ul class="iconlist">{{Bp-d1|'''Megatron''' (2024)}}</ul>
:*''Accessories'': Fusion cannon

: The original ''ULTIMATES!'' Megatron was repackaged as a "Transformers Deluxe" figure, physically identical to the first release but now lacking all accessories except the fusion cannon. Its new packaging resembles a VHS clamshell box; specifically, the colors and trade dress strongly resemble the [[Video Gems]] tapes, while the character artwork and subtitle are taken directly from the [[The Original Transformers|Kid Rhino]] tapes.
{{-}}

==Nendoroid==
[[File:Nendoroid G1 Megatron.jpg|upright=1.66|thumb|Gokuuuu!]]
*'''Megatron''' ([[2022]])
**''Nendoroid ID Number'': '''1793'''
**''Accessories'': Angry face plate

:The second ''G1''-styled [[Nendoroid]] release after his arch-nemesis Optimus, Megatron is a [[super deformed]] fusion of cute and evil. Mostly the latter.

:Megatron comes with an optional "angry face" accessory to replace his regular facial expression, can interchange body parts with compatible figures, and is well-articulated despite his small size.

:Unusually for a Nendoroid figure, this sculpt is produced by Toyhouse with Nendoron's supervision.

{{-}}

==''Minimates''==
*'''Megatron''' (Series 2, 2022)
**''Accessories'': Fusion cannon, energy mace, stand

:Part of the second wave of Transformers [[Minimates]] from [[Diamond Select Toys|Diamond Select]], this Megatron is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. Due to their small size, all 4 figures in each series are sold in the same blister card.

*'''VHS Minimates Box Set''' (2022)

:''Minimates'' Megatron was rereleased as part of a [[San Diego Comic-Con]] 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles a [[Family Home Entertainment]] VHS tape. Only 2500 of this set were produced.
{{-}}

==Icon Heroes==
*'''Megatron X Soundwave Retro Pin Set''' (2022)
: A hard enamel pin based on Megatron's original G1 package art made by Icon Heroes. It comes carded with a [[Soundwave (G1)/merchandise#Icon Heroes|Soundwave]] pin.
{{comingsoontoy}}
{{-}}

==''Ultimetal''==
[[File:UltimetalMegatron.jpg|upright=1.66|thumb|Four million years later, it finally came out.]]
*'''Megatron''' (2022)
**''ID number:'' '''UM-03'''
**''Accessories:''

: ''Ultimetal'' Megatron is a large non-transforming figure produced by [[Art Storm]], standing at an impressive 17" and made from extensive [[die-cast]] metal. The figure is highly articulated and features [[LED]]s on the eyes and fusion cannon. Its most conspicuous features are the numerous magnetically attached armor panels that, when removed, reveal Megatron's internal anatomy, including functional pistons. It is also the first Transformers-related item ever released to include voice clips from [[Frank Welker]].

: This piece was first solicited in 2014 but suffered multiple delays, only at last being released in June 2022.
{{-}}

==Kotobukiya Bishoujo Series==
[[File:Bishoujo-Series-Megatron.jpg|thumb|Applications to join the Decepticons have since ''skyrocketed''.]]
*'''Bishoujo Series Transformers Megatron''' (February 2023)
**''Known designers:'' [[Shunya Yamashita]] (artist)
:''[[Kotobukiya]] [[Bishoujo Series]]'' Megatron is a 1/7 scale PVC figure that reimagines the Decepticon leader as a cute anime girl (formally termed as a ''{{w|Bishōjo}}''). This version of the character translates various elements of the robot design into fashion and style choices, such as her haircut being roughly shaped like Megatron's helmet, as well as converting the fusion cannon into an ''enormous'' handheld weapon. The figure is attached to a purple display base designed after the Decepticon insignia.

:A Deluxe Edition release also included a B5 sized acrylic board for display, featuring Yamashita's original artwork of the character.
{{-}}

==Transformers: Kindergarten Series==
[[File:Kindergarten-MegatronG1.jpg|thumb|300px|He can't transform until he turns 18.]]
*'''Megatron''' (2023)
:A childlike nontransformable figurine of Megatron was available as part of ''[[Transformers: Kindergarten Series]]'', a crowdfunded [[Blindpacking|blindpackaged]] toyline available exclusively in China. Megatron's figure was one of the commonly-occurring characters, and depicted him cradling a [[Kremzeek]] and holding an [[Energon]] drink. The figurine included a translucent plastic stand and a small character card.

{{-}}

==Super Shogun==
*'''Megatron''' (2023)
**''Accessories'':

:Produced by [[Super7]], this giant-sized representation of Megatron is supposed to harken back to the 1970s ''{{w|Shogun Warriors}}'' franchise. Megatron stands 24" tall and is made of hollow vinyl, with 3 points of articulation and wheels on his feet.
{{-}}

==''Magic: The Gathering''==
[[File:MTG-Megatron.jpg|thumb|upright=1.66]]
*'''Megatron, Tyrant / Megatron, Destructive Force''' (2022)
**''ID number:'' '''012/015'''
**''Set code:'' '''BOT'''
**''Color identity:'' '''Red/White/Black'''
**''Casting cost:'' '''{3}{R}{W}{B}''' (front), '''{1}{R}{W}{B}''' (back)

:"Megatron, Tyrant" is part of the 2022 ''[[Magic: The Gathering]]'' ''[[mtg:Universes Beyond|Universes Beyond]]'' ''[[mtg:Transformers|Transformers]]'' card set, found in Set Booster and Collector Booster packs of ''Magic''<nowiki>'s</nowiki> ''[[mtg:The Brothers' War|The Brothers' War]]'' set. It can be reversed to become "Megatron, Destructive Force", representing Megatron in vehicle mode.
:A variant of this card was available solely in Collector Booster packs, depicting [[Megatron (SG)#Magic: The Gathering|''Shattered Glass'' Megatron]].
{{anchor|MTGSLD}}
[[File:MTG-SLD-Megatron.jpg|thumb|upright=1.66|''But O, Phyrexia With your blood still warm on the ground'']]
*'''Megatron''' ''(Blightsteel Colossus)'' (2022)
**''ID number:'' '''1079'''
**''Set code:'' '''SLD'''
**''Color identity:'' '''Colorless'''
**''Casting cost:'' '''{12}'''

:"Megatron" is part of the ''[[Magic: The Gathering]]'' card pack ''Transformers: Optimus Prime vs. Megatron'', part of the ''[[mtg:Secret Lair|Secret Lair Drop Series]]'' ''[[mtg:Secret Lair Drop Series: December Superdrop 2022|December Superdrop 2022]]'' set. It was available exclusively from [https://secretlair.wizards.com secretlair.wizards.com] from [[December 5]], [[2022]] through [[January 6]], [[2023]].
:Megatron is a [[mtg:Skinned card|reskin]] of the existing ''Magic'' card [https://scryfall.com/card/2xm/235/blightsteel-colossus Blightsteel Colossus], using the same rules and counting as it for all gameplay purposes. Similar to his [[Optimus Prime (G1)/merchandise#MTGSLD|eternal rival]], Megatron is both powerful and nigh-indestructible, with a very high casting cost—but at the cost of one extra mana compared to Optimus, Megatron has the incredibly potent [[mtg:infect|infect]] mechanic, which combines with his power of 11 to let him kill a player in ''one hit'' if he isn't blocked. While the card has printing on both faces, depicting Megatron in robot mode and vehicle mode respectively, both have the same printed abilities and count as a single card for rules purposes—just choose which side you want to display when he enters the battlefield.
: The ''Optimus Prime vs. Megatron'' set also includes [[Optimus Prime (G1)/merchandise#MTGSLD|Optimus Prime]], [[AllSpark#Magic: The Gathering|The AllSpark]], and the bonus card [[Cybertron (planet)|Cybertron]].

{{--}}

==XM Studios==
*'''Starscream''' (2022)

:[[XM Studios]]' statue of Starscream is 32" tall, made of hand-painted porcelain. Starscream has different head and arm sculpts to allow owners to pose him in his "coronation" regalia and also holding a gun-mode Megatron. The set also includes a sculpted representation of Starscream's jet mode that can be displayed next to the robot.

:350 pieces were produced, with a suggested price of about $1,500 US.

*'''Soundwave''' (2022)

:Gun-mode Megatron was also one of the alternate hand-weapon options for the XM Studios statue of Soundwave.

*'''Megatron''' (2022)

:This painted porcelain Megatron statue stands 26" tall, and features alternate heads to provide different facial expressions and multiple arms for choices in posing. His accessories include not just the expected spiked flail but also a cross-continuity visitor, the [[Dark Star Saber]]. The set also includes a sculpted representation of Megatron's gun mode to be displayed next to the robot.

:258 pieces were produced, with a suggested price of about $1,600 US.

*'''Megatron Bust''' (2023)
[[File:XMStudiosMegatronBust.jpg|upright=1.66|thumb|[[Unicron/toys#Haslab|HasLab Unicron]] was for casuals!]]
:Just look at it. LOOK at it. It's a ''4-foot-tall'' bust of Megatron. 150 were made with a suggested retail of $4,000.
{{comingsoontoy}}
{{-}}

==Just Play==
{{anchor|Podpals}}
[[File:PodpalsMiniMegatron.jpg|upright=1|thumb]]

*'''Podpals Megatron''' (2023)

Made by [[Just Play]], ''Podpals'' Megatron is a rounded plush. It has tiny flaps of fabric for its legs, while other details are printed on. There are two versions, an 8 inch version and a 3 inch version. They are identical besides their size.

<ul class="iconlist">{{Bp-d1|'''Megatron''' (2022)}}</ul>
:This Megatron is a small, soft plastic figure, 2" tall, with no articulation. It's overall based on his appearance in the original cartoon.
:The packaging is G1-styled with the classic black-red gradient and the G1 Optimus Prime toy in the top right corner.

[[File:JustPlay_G1_Megatron.jpg|thumb|upright=.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (2024)}}</ul>
:This figure is identical to the original release. Unlike the original release, however, he also comes with a foil sticker on a card with a sort of profile picture on the back and text underneath it saying "MEGATRON IS THE LEADER OF THE DECEPTIONS." The foil sticker part of the card has a few miscolorations, as well as not having his iconic fusion cannon. The packaging is also different as it no longer features Optimus Prime (having been replaced with a block advertising the new card) and it has a purple gradient instead of red.
:There's a variant of this found at stores like Dollar Tree where the block advertising the card is moved to the top left with a red circle that says "$1.25" in it in the top right instead.

{{-}}

==''Transformers × Mini World''==
[[File:MiniWorldMegatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (2023)
**''Accessories'': Transforming base, gun, sword, machine part, crane arm, 2 connectors

:''[[Transformers × Mini World]]'' Megatron is a tie-in to the popular [[China|Chinese]] game ''[[Mini World]]''. It comes with a display base with rolling wheels that can fold up into a cube-shaped thing that is a very rough interpretation of a tank. The figure can transform into a storage mode and store fully inside the cube, or you can remove the head and replace it with the folded up cube. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and sword accessories.

:Each set includes [[Build a Figure]]-like machinery components which can be combined with parts from other sets to make new structures.

:It is exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.
{{-}}

==Fools Paradise==
[[File:LOWFOOL League of Steel Megatron.jpeg|upright=1.66|thumb]]
*'''Megatron''' (2023)
**''Accessories'': Football

:Part of a collaboration between Hasbro and [[Hong Kong]]-based online store ZCWO, Megatron joins the "League of Steel" subline of [[Fools Paradise]]'s LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues of [[Evangelion]]s and {{w|Gundam}}s. He is depicted as a human man wearing heavily Megatron-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache.

:Preorders for Megatron opened in September 2023, with a projected release date of December.
{{comingsoontoy}}

==McFarlane Toys==
{{Anchor|PagePunch}}[[File:McFarlanePagePunchersPrimeAndMegs.jpg|upright=1.66|thumb]]
*'''Optimus Prime and Megatron''' (2024)
: ''[[Page Punchers]]'' Megatron is 3-inch non-transformable action figure based on his [[:File:RageRage-Megatronappears.jpg|IDW Autobot design]] by [[Alex Milne]], though sporting a Decepticon insignia rather than an Autobot one.

: He comes in a two-pack with [[Optimus Prime (G1)/merchandise#PAGEPUNCH|Optimus Prime]], packaged with [[New Cybertron Part 1: To Walk Among the Chosen|''Optimus Prime'' #1]] and [[Dissolution Part 6: This Machine Kills Fascists|''Lost Light'' #6]].

{{-}}
==Yolopark==
===AMK Pro===
{{anchor|AMKPro}}
[[File:YoloparkAMKProMegatron.jpeg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (AMK Pro, 2023)}}</ul>
:*''Accessories'': Stand, [[Fusion cannon]], [[Energon mace]], Laser Sword, [[Key to Vector Sigma]], Laser Pistol, 2 alternate faces, alternate chest

:Released as the first figure Yolopark's AMK Pro line, Megatron comes in pre-assembled modules as opposed to traditional model kit runners. This allows him to be assembled quickly and easily without tools. Unlike Yolopark's regular AMK line, the AMK Pro line features diecast parts and light-up features. In Megatron's case, his eyes will light up when tapping his head with a magnet, and his Fusion cannon will light up with the press of a button. His eyes require 1 CR927 battery, and his fusion cannon requires 3 AG1 batteries, neither of which is included.

:The figure was originally part of a Kickstarter campaign before reaching full release later in the year. Curiously, the prototype pictured at the time and even early review copies sent out had a different head sculpt which was refined for the final product. An "angry" alternate face was also swapped out in favor of a more detailed "neutral" face.

{{-}}{{anchor|ShanghaiWonderFesGold}}
[[File:Yolopark-TF-Shanghai-Wonder-Fes-2023-AMK-Pro-Megatron-Golden-Ver.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron Golden Colors Version''' (AMK Pro, 2023)}}</ul>
:*''Accessories'': Stand, [[Fusion cannon]], [[Energon mace]], Laser Sword, [[Key to Vector Sigma]], Laser Pistol, 2 alternate faces, alternate chest

: Available exclusively at the Shanghai Wonder Festival 2023, held on October 2-3, 2023, this Megatron is a gold redeco of the ''AMK Pro'' kit above, representing his Electrum-coated appearance.

{{-}}{{anchor|SGCCPurpleMegs}}
[[File:Yolopark-TF-SGCC-2023-Yolopark-AMK-Pro-Megatron-Purple-Version.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron Purple Version''' (AMK Pro, 2023)}}</ul>
:*''Accessories'': Stand, [[Fusion cannon]], [[Energon mace]], Laser Sword, [[Key to Vector Sigma]], Laser Pistol, 2 alternate faces, alternate chest

:Released exclusvely at the Singapore Comic Con 2023, held on December 9-10, 2023, this Megatron is another redeco of the ''AMK Pro'' kit is mostly translucent purple to represent the moment of him being reformatted into Galvatron.

{{-}}{{anchor|AMKHasbroEdition}}
[[File:TF-Yolopark-AMK-Pro-20cm-Megatron-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (AMK Hasbro Edition, 2024)}}</ul>
:*''Accessories'': [[Fusion cannon]], [[Energon mace]], Laser Sword, Laser Pistol, Stand with Ark Backdrop

:The AMK Pro Megatron kit is re-released under the "Hasbro Edition" branding. In this release, the diecast parts have been replaced with plastic, while the light-up feature, alternate faceplate, chest accessories, and Key to Vector Sigma are no longer included. In addition, Megatron's display stand also comes with an additional Ark backdrop for the arm unit. Unlike the similarly released Optimus, Megatron features painted red eyes.

{{-}}
{{anchor|AMKComboSet}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-and-Megatron-Combo-Set-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Megatron and Optimus Prime Combo Set''' (AMK 2-pack, 2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Energy Mace, Light Sword, Laser Pistol, Two display stands (Teletraan-1 Backdrop, Ark Backdrop)

:The "Hasbro Edition" of the AMK Pro Megatron kit is also sold as a two-pack with the same line's Optimus Prime. The 2-pack also comes with a unique pin.

{{-}}{{anchor|AMK2025}}
[[File:Yolopark-TF-AMK-Pro-Megatron-(2025).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (AMK Hasbro Edition, 2025)}}</ul>
:*''Accessories'': [[Fusion cannon]]

: This release of the ''AMK'' Megatron is largely identical to the "Hasbro Edition" kit, but he only includes his Fusion Cannon. The only minor change from the previous ''AMK'' release is the eyes being unpainted and translucent red.
{{-}}

===AMK Mini Series===
[[File:TF-Yolopark-AMK-Mini-Series-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (2024)}}</ul>
:*''Accessories'': 2 additional pairs of hands (Splayed, Pointing)

:The ''AMK Mini Series'' Megatron is a smaller version of the character and features swappable hand parts. While he already had his fusion cannon, Megatron's default fists/item-holding hands still can accommodate some of the weapons from the same line.

:Note that the connection between the waist peg and the torso can feel slightly too tight, which gives the impression that it ''might'' potentially break when turned. If anyone is concerned, you can lightly sand the peg to alleviate the issue.

:Megatron is sold as either an individually marked single, a 2-pack with the same line's Optimus Prime in a single box, or as a blind box figure.

{{-}}
===BMK===
[[File:Yolopark-BMK-Megatron.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (2025)}}</ul>
:*''Accessories'': Fusion Cannon
:Marketed as a starter figure for the 2020s young lads, the ''BMK'' (Which stands for "Beginner Model Kit") Megatron is a 16cm version of the character, with his design based on the ''AMK/Pro'' release. As with other ''BMK''s, Megatron features similarly basic articulation, consisting of a ball-jointed head, ball-jointed shoulders, single-axis 90-degree elbows, a rotating waist, and slightly swiveling ankles...that's it.

{{-}}

==''Beyblade X''==
[[File:Beyblade_X_Transformers_Megatron.jpg|thumb]]
*'''Optimus Prime and Megatron Multipack Set''' (2024)

:'''Megatron 4-80B''' was available in a two-pack with [[Optimus Prime (G1)/merchandise#Beyblade X|Optimus Prime 4-60P]], which was exclusive to Amazon in Hasbro territories, and exclusive B4-sponsored stores in Takara-Tomy territories. It consists of three pieces that can be interchanged with those of [[Beyblade#BEYBLADE X|other ''Beyblade X'' tops]]; an attacking "Blade" primarily made of metal, a "Ratchet" that locks parts together and determines height, and a "Bit" that touches the ground and determines movement.

:The "Megatron" Blade features evergreen art of Megatron on its central Gear Chip and is partial of the mainline ''Beyblade X'' Blade "Scythe Incendio". The Ratchet (4-80) and Bit (Ball) are recolored parts from other ''Beyblade X'' tops.

:In Hasbro territories, a QR Code sticker hidden underneath the Blade can be scanned into the ''Beyblade X'' companion app. In Takara-Tomy territories, the QR Code stickers are omitted in favor of a Beycode Card packed with the instructions. However, scanning any of these QR codes only awards the player with in-app points, and will not unlock the Beyblade for in-game use like it would for any mainline ''Beyblade X'' tops.

{{-}}

==''Hot Wheels''==
{{anchor|HWSkate}}
[[File:Hot Wheels Skate Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Skate, 2024)}}</ul>
:*''Accessories'': Finger sneakers
:Part of the ''[[Hot Wheels (franchise)|Hot Wheels]] Skate'' subset made by [[Mattel]], this is a Megatron-themed finger skateboard that comes with a pair of purple finger sneakers. The shape and packaging use Dreamwave-era artwork of Megatron.

{{-}}

==''Authentics''==
{{anchor|CBmegatron}}
[[File:Authentics Cyber Battlers Megatron.jpeg|upright=1|thumb]]
*'''Cybertron Battlers Megatron''' ([[2022]])
:Released in the ''Cybertron Battlers'' subline of ''Authentics'', this vinyl figure is a non-transforming, 5.5 inch rendition of Megatron in his evergreen design with limited points of articulation. In tradition, he has his trademark fusion cannon molded into his right arm.

:He comes packaged either individually with a tag, or in twos in a box together with [[Bumblebee (G1)/merchandise#Authentics|Bumblebee]] and [[Optimus Prime (G1)/merchandise#Authentics|Optimus Prime]].
{{-}}

{{anchor|Teeturtlereverse}}
[[File:Reversible_Megatron_Teeturtle.jpg|upright=1|thumb]]
*'''Reversible Plushie Megatron''' (2025)

:Released by [[TeeTurtle]], ''Reversible Plushie'' Megatron is a round, [[super deformed]] plush, that can be turned inside out to reveal a tank alternate mode. It is 3 inches tall and exclusively available from blind boxes. It appears to be based on Megatron's [[evergreen]] design.
{{-}}

==Blokees==
===Galaxy Version===
{{anchor|Galaxy Version}}
[[File:Blokees-TF-Galaxy-Ver-01-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Galaxy Version, 2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' 2 pairs of hands (Weapon-holding/fists, open-palm), pointing left hand, Blast Effect, spare peg-and-ball piece, spare ball-and-ball piece, black stand, 1 pair of Autobot/Decepticon symbols

:Released in the First Wave of ''[[Blokees]]''' Galaxy Version line of blind boxes, this Megatron is a four-inch-tall, articulated, and non-transforming snap-on model kit of the Decepticon Leader. Like many other ''Blokees'' figures, Megatron uses a "Standard Body" as a skeleton, in which pieces are attached to make it look like different characters.

:Like many other Blokees figures, Megatron includes a stand with four studs he can connect to.

{{-}}{{anchor|GVParallelUniverse}}
[[File:Blokees-TF-Galaxy-Version-06-IDW-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Megatron''' (Galaxy Version, 2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, blast effect

:The sixth wave of the ''Galaxy Version'' blind boxes features an all-new kit of Megatron based on [[Alex Milne]]'s design in IDW's "''More Than Meets The Eye''" comics, In addition to the new hand runner introduced in the 4th wave, Megatron comes with a purple version of the newly-tooled blast effect. Like the other 'Galaxy Version' kits since Wave 5, Megatron features a slightly upgraded suite of standard body parts, notably the sturdier, pre-assembled hinge joints and the multi-colored head with color-coded eyes. As advertised in the box, he has a pull rate of 1 in every 9 boxes.

: Unlike the other figures in the ''Galaxy Version'' Transformers line, this Megatron features a unique pair of comic-accurate forearm parts. These parts are not designed to interact with other accessories of the same peg size, except for the Fusion Cannon, which is exclusive to the right forearm. Speaking of the Fusion Cannon, exercise some caution while posing the right arm, as you may easily slide down and pop off the cannon from the forearm.

:If you're a speed builder, be mindful when attaching the pre-assembled joints; Unlike the symmetrical joints from earlier waves, the pegs on both ends of these joints are designed to connect to specific pieces; The tabs with slightly smaller holes are intended for the upper arms and thighs, while the regular tabs are meant for the forearms and lower legs. While an incorrect knee joint assembly may cause it to very slightly lean when standing straight or in an A-stance, an incorrect elbow assembly won't be noticeably affected unless you're looking very closely.

:The product website mislabels his alternate mode as a sports car instead of a tank, which is copied and pasted from Sunstreaker's profile.

{{-}}
[[File:Blokees-TF-GV09-Megatron.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 09 - ???'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), energy sword

:The ninth wave of the ''Galaxy Version'' blind boxes features a new redo of Megatron, and he also comes with an energy sword he used in ''The Transformers: The Movie''. In addition to the ball-jointed waist from the previous entry, Megatron also features updated articulation, including a slide-down hip joint axis, rotating upper thigh joints, and improved double-jointed knee articulation, similar to his wave mates.

:Because the newly designed knee joints are made to fit the narrow gaps in the thighs and lower legs, they are incompatible with joints from previous releases, including those used for the elbows.

:Along with Bombshell, Megatron is first revealed at Blokees' booth at the China Toy Expo 2025 event.
{{comingsoontoy|December 2025 release}}
{{-}}
===Shining Version===
{{anchor|Shining Version}}
[[File:Blokees-TF-Shining-Version-01-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Shining Version, 2024)}}</ul>
:*''Series:'' '''Shining Version 01 - Shining Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (Weapon-holding/fists, open-palm), pair of Autobot/Decepticon symbols, Energon Mace

:Released in the first wave of Blokees' ''Shining Version'' line, this edition of the original ''Galaxy Version'' mold now features painted translucent face parts to accommodate with a torso frame that lights up upon shaking (or at least just ''lightly'' tap some areas on the torso), causing the eyes to glow for a limited time. In addition to his identical accessories from the ''Galaxy Version'' release, Megatron also comes with an Energon Mace, a single Energon Cube, and a new, larger figure stand.

{{-}}{{anchor|Blokees Metallic}}
[[File:Blokees-TF-Shining-Version-01-Secret-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Metallic Megatron''' (Shining Version, 2024)}}</ul>
:*''Series:'' '''Shining Version 01 - Shining Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (Weapon-holding/fists, open-palm), pair of Autobot/Decepticon symbols, Energon Mace

:The chase figure of the first ''Shining Version'' line with a much slimmer pull rate of 1 in every 36 boxes, i.e. once in four cases, this Megatron is redecoed in a metallic sheen save for the joint pieces along with some additional deco patterns such as the burnt Fusion Cannon barrel, and he comes with the same accessories as his regular ''Shining Version'' counterpart.
{{-}}{{anchor|ShatteredUniverseMiner}}
[[File:Blokees-TF-SV-03-Miner-Megatron.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-multi|'''Miner Megatron''' (Shining Version, [[2025]])}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' 2 pairs of hands (fists/accessory-holding, splayed open-palm), Pickaxe, Drill, figure stand

:The third wave of Blokees' ''Shining Version'' line features a new kit of Megatron, modeled after his Miner body in IDW's "Chaos Theory" comic. He also comes with two accessories: A drill and a pickaxe.

{{-}}{{anchor|ShatteredUniverseChase}}
[[File:Blokees-TF-SV-03-Gladiator-Megatron.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-multi|'''Gladiator Megatron''' (Shining Version, [[2025]])}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' 2 pairs of hands (fists/accessory-holding, splayed open-palm), Pickaxe, Drill, figure stand

:The chase figure of the third ''Shining Version'' line with a much slimmer pull rate of 1 in every 36 boxes, this Megatron is a redeco/retool of the Miner Megatron kit to resemble his Gladiator self in "Megatron Origin". In addition to the reused pickaxe, Megatron comes with a different drill accessory.
{{-}}

===Action Edition===
[[File:Blokees-TF-Action-Edition-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Action Edition, 2024)}}</ul>
:*Accessories: 4 faceplates, Fusion Cannon, Energon Mace, Energy Sword, Energon Pistol, Laserbeak, Reflector Camera, Kremzeek figurine, display stand (with two adapters), Nemesis Throne, magnet-powered faction symbol block

:The "Action Edition" Megatron is a 7-inch (approx 18cm) model kit with a slightly more complex build and features an inner frame (equivalent to the ones used for ''Bandai'''s "Master/Perfect/Real Grade" kits) with greater articulation points than his other ''Galaxy Version'' toys. In addition to his signature weapons from both the cartoon and the 1986 movie, Megatron also comes with 3 additional faceplates to swap with, a Reflector camera, a Laserbeak figure, a Kremzeek figurine, a Nemesis Throne, and a display stand with two adapters for either Megatron or Laserbeak. A magnetic component in his faction symbol block activates the light-up features that illuminate his eyes. Unlike Action Edition Optimus, Megatron utilizes fully articulated fingers.
{{-}}

===Defender Version===
{{Note|Every case comes with a random Commemorative Card, with 10 Common, 1 Gold, and 1 Silver for each out of every 12 cards.}}
[[File:Blokees-TF-Defender-Ver-01-Megatron.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Defender Version, 2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''

:Released as part of the first wave (and one of the headline figures) of the ''Defender Version'' line of blind boxes, this Megatron is a 2.2-inch (5.5cm) figure, a few inches smaller than the ''Galaxy Version'' kits, but still articulated. Unlike his ''Galaxy Version'' kit, Megatron only comes with his signature Fusion Cannon.

:As with all robot mode kits from this line, Megatron features color-coded eye parts, which double as the neck's socket joint.

{{-}}{{anchor|SpecialGalaxyType}}
[[File:Blokees-TF-GV-Defender-01-Special-Galaxy-Type-Megatron.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Special Galaxy Type Megatron''' (Defender Version, 2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''

:One of the two chase figures of the line, the "Special Galaxy Type" Megatron is a metallic redeco of the figure above, and he also features thoroughly painted details to make him more accurate to the show. Like Optimus, he has a much slimmer pull rate of 5 in every 144 boxes.

{{-}}{{anchor|SpecialArmorType}}
[[File:Blokees-TF-Galaxy-Version-Defender-01-Megatron-Fully-Armed.jpg|thumb|250px|He is the storm that is approaching.]]
<ul class="iconlist">{{Bp-d1|'''Special Armor Type Megatron''' (Defender Version, 2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Left Fusion Cannon, Wing Pack

:The "Special Armor Type" version of the Megatron kit is an alternate version of the Special Galaxy Type chase figure, decked out in metallic paint, and comes with additional armaments such as the backpack based on his appearance in IDW 2005's [[The Transformers: Stormbringer|''Stormbringer'']] limited series, and the newly-tooled left forearm to accommodate the extra cannon. Unlike the chase variant above, this Megatron has an '''''even''''' slimmer pull rate of '''1''' in every 144 boxes.

{{-}}{{anchor|Brilliant}}
[[File:Blokees-TF-Defender-Version-03-Brilliant-Megatron.jpg|thumb|250px|Who needs the Fusion Cannon when you have a pair of Shining Fingers, Kicks, and...thighs. Huh.]]
<ul class="iconlist">{{Bp-d1|'''Brilliant Megatron''' (Defender Version, 2025)}}</ul>
:*''Series:'' '''Defender Version 03 - Heavy Metal War'''

:The third wave of the ''Defender'' kits features a redeco of the first wave's Megatron in his "Brilliant"-themed coloration, in opaque gold, and translucent yellow for the fists, thighs, and feet. In addition, Brilliant Megatron also utilizes the front crotch and shin tampographs from the first wave's Special Galaxy Type kit.

{{--}}

==Auldey==

[[File:Auldey-TF-AAE-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Alpha Action Elite, 2025)}}</ul>
:*''Series:'' '''Attack on Earth'''
:*''ID Number'': '''AAE-010'''
:*''Accessories:'' 4 pairs of hands, trading card
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Megaton is a 5-inch non-transforming but highly articulated action figure. His back canon can be twisted under his arm, similar to the original toy. Oddly he comes with a spare pair of hip joints.
:As advertised in the box, the lineup had a 11/72 probability of getting Megatron.

{{-}}{{anchor|auldeymetallic}}
[[File:Auldey-TF-AAE-MegatronMetallic.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron (Metallic Color)''' (Alpha Action Elite, 2025)}}</ul>
:*''Series:'' '''Attack on Earth'''
:*''ID Number'': '''AAE-009'''
:*''Accessories:'' 4 pairs of hands, large sword, trading card
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Megaton is a 5-inch non-transforming but highly articulated action figure. This chase figure is a toy based repaint of the standard Megatron figure, with metallic paint and stickers and a toy based head sculpt. His back canon can be twisted under his arm, similar to the original toy. In addition to the spare hands, he comes with a large sword.
:As advertised in the box, the lineup had a 1/72 probability of getting this variant.
{{-}}

{{-}}{{anchor|auldeyformatl}}
<ul class="iconlist">{{Bp-d1|'''Megatron (Reformatting version)''' (Alpha Action Elite, 2025)}}</ul>
:*''Series:'' '''The Demon Star Approaches'''
:*''ID Number'':
:*''Accessories:'':
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Megaton, a 5-inch non-transforming but highly articulated action figure, is a repaint of the above figures, based on the scene from [[The Transformers: The Movie]] when he was transformed into [[Galvatron (G1)/toys|Galvatron]] by [[Unicron]].

{{comingsoontoy}}
{{-}}

==Ty==
* '''Beanie Bouncer Megatron''' (2025)
[[File:bouncer-mt.jpg|thumb|200px|]]

:A bouncing ball covered in fur produced by Ty, creator of the more famous Beanie Babies and Beanie Boos. The bottom of Megatron's helmet is represented by additoinal pieces of felt material coming out of the ball. Opposite the face is an Decepticon symbol.

:Megatron is also available in a three set alongside Optimus Prime and Bumblebee.

{{-}}

==References==
{{Reflist}}

[[Category:Attacktix]]
[[Category:Bitfig]]
[[Category:Combiners]]
[[Category:Decoys]]
[[Category:Generation 1 Decepticons]]
[[Category:MyClone]]
[[Category:Robot Heroes]]
[[Category:Transformers Character Card Decepticons]]

Optimus Prime (G1)/merchandise

2025-10-27T17:11:10Z

Leia G:

{{suite}}

'''Optimus Prime''' is a bit of a shill.
==Stamp Bot==
[[File:OptimusPrime-StampBot-1984.JPG|thumb|Truck stamp is cool!]]
*'''Optimus Prime''' (1984)
:Made by [[HG Toys]], Stamp Bot Optimus Prime is a small, non-poseable figurine of Optimus Prime based on his toy with a rubber stamp on the base, and a cap with a felt "floor" that was soaked in ink. The stamp made an image of Optimus Prime's cab mode.
{{-}}

==The Transformers Cookie Jar==
*'''The Transformers Cookie Jar''' (1984?)
:A ceramic cookie jar in the likeness of Optimus Prime's head. The top of Prime's head lifts off for the storage of delicious baked goods or Energon or what-have-you. The cookie jar was manufactured by [[Great American Housewares]] under license from [[Hasbro]].
::*''[http://www.tfw2005.com/boards/transformers-toy-discussion/179468-optimus-prime-cookie-jar-price-check.html Images of The Transformers Cookie Jar at TFW2005]''
{{-}}

==Collegeville Costumes==
{{anchor|CollegevilleG1}}
*'''Optimus Prime''' (1984)
:Although [[Collegeville Costumes]] only released a small number of Transformers [[Halloween]] costumes, and made some odd choices for characters to depict in the process, Optimus Prime was an obvious choice as one of their first releases. The costume consists of a thin plastic facemask based directly on the Optimus toy's head complete with yellow eyes, and an orange and yellow plastic smock decorated not with the details of Optimus' body, but with his package art and the Transformers logo.

*'''Optimus Prime''' (1993)
{{anchor|CollegevilleG2}}
:Optimus Prime recieved a second costume from Collegeville for their line of ''[[Transformers: Generation 2 (franchise)|Transformers: Generation 2]]'' line. As with the 1984 Collegeville costume, it consists of a thin plastic mask held on by elastic. Unlike the previous costume, the plastic smock is now decorated with the details of Optimus' G2 body, as well as having his name and the G2 logo on it.
{{-}}

==Vehicle Play Tent==
[[File:Vehicleplaytent.jpg|thumb|Both a big truck ''and'' a series of tubes.]]
*'''ERO''' (1984?)
:The Vehicle Play Tent was part of the deluge of Transformers merchandise in the 80s. The tent was constructed by means of a series of plastic tubes that fit into sockets on corner pieces (similar to the "k'nex" building system that arrived a few years later), then a vinyl cover was slipped over this PVC skeleton to make the tent.
{{-}}

==Oral Care Station==
*'''Optimus Prime Oral Care Station''' (1984/85?)
:An electric toothbrush in the likeness of Optimus Prime. A battery-operated feature causes the toothbrush (attached at Prime's left wrist) to move back and forth. The set also included a cup for [[water]], an extra brush head, and a stand to hold the various accoutrements.
::*''[https://www.flickr.com/photos/14985789@N07/3207711517/?rb=1 Image at Flickr.com]
::*''[http://fredsworkshop.com/oral.html Images of the Oral Care Station in-box at FredsWorkshop.com]''
{{-}}

==Transformers Milk Caramel==
[[File:Tfcaramel optimus prime.jpg|thumb|upright=1.66|Note: Do not eat! ... the candy. The toys taste better.]]
*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A small soft-rubber figurine (known as a ''keshigomu'' in Japan) of Optimus Prime was released as part of [[Kabaya]]'s line of ''[[Transformers Milk Caramel]]'' [[candy toy]]s. Like all the figures from the 1985 range, Prime came blindpacked, and was available in a variety of colors including white, blue, yellow, green and orange. As the name of the series suggests, he came with a piece of caramel candy.

*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A second Optimus Prime ''keshigomu'' was included in the second wave of ''Milk Caramel'' figures, sporting some broader proportions and more toy-based design cues like visible wheels, holding its gun in its left hand, rather than its right. This figure was available in red, yellow and blue variations; a baffling variant is known to exist with a ''Decepticon'' symbol on its left shoulder!

*'''Convoy''' (1985)
**''ID number:'' '''2'''
:The second ''Milk Caramel'' wave also contained a third Optimus Prime figure, largely identical to the second, except with its gun in its right hand, and holding its left arm aloft. Again, this figure was available in red, yellow and blue variations.
{{-}}

==Transformers Choco==
[[File:Tfchoco optimusprime.jpg|thumb]]
*'''Convoy''' (1985)
:A small solid-color snap-together model kit of Optimus Prime was released by Kabaya as part of their ''[[Transformers Choco]]'' line, coming packaged with small chocolate candies similar to [[M&M's]] called "Chocolate Dots". The kit can transform from robot to vehicle mode, though this version of Prime doesn't have any hands.

*'''Convoy''' (1985)
**''Accessories:'' Two fists
:A second ''Choco'' version of Prime was upsized from the first a little, and was given a pair of removable fists, the right one clutching Prime's [[ion blaster]].
{{-}}

==Transformers Gum==
[[File:Tfgum optimusprime.jpg|thumb|upright=1.66]]
*'''Convoy''' (1985, 1997)
**''Accessories:'' Two fists, ion blaster
:In addition to the small ''Choco'' model kit, Kabaya also released a larger version of Prime under their ''[[Transformers Gum]]'' line. Essentially a downsized version of the original Prime toy (sans trailer), the kit is sculpted from black, red, and grey plastic, features stickers rather than paint applications for details, and came with a stick of gum.

:This kit was reissued in 1997 by might-or-might-not-be official Transformers licensee [[ToonTown]] in [[South Korea]] (possibly, in a 2-pack with a reissue of ''Transformers Gum'' [[Soundwave (G1)/merchandise#Transformers Gum|Soundwave]] <ref>[http://fuwakudou.web.fc2.com/prisoners06.html One source] mentions obtaining two boxes of the ToonTown ''Transformers Gum'' releases with each containing two kits - the one numbered #1 featuring Optimus Prime and Soundwave and the one numbered #2 featuring Sideswipe and Starscream - but considering that none of the other (albeit admittedly very few) sources that discuss these kits mention a similar arrangement, it is possible that this was either a packing mistake or simply already-opened boxes being sold on the secondary market with two loose kits stuffed into them (the article does not specify whether or not the boxes they obtained were sealed, although they do look new-ish in the provided pictures). Still, considering how very little information exists regarding these releases in general, it will nonetheless be noted here that these kits ''might'' have been released as 2-packs at some point.</ref>), looking mostly identical save for a set of cheaper-looking paper decals.
{{-}}

[[File:Tfgum2010 g1prime.jpg|thumb|upright=1.66|My limbs need to be horribly mutilated and rearranged to change forms!]]
*'''Convoy''' (2010)
**''Accessories:'' Ion blaster
:The first wave of 2010's revival of the ''Transformers Gum'' series served up a double dose of Prime, beginning with this new model kit of the original Generation 1 version of the character. Sculpted from white, red, and blue plastic, the kit features a positively ''ungodly'' amount of stickers to make it look presentable and comes with Prime's traditional ion blaster weapon, which stores on the rear of his cab in vehicle mode.

:In terms of transformation, Convoy partially [[partformer|partforms]], as the forearms are needed to be removed and attach it back during conversion.
{{-}}

[[File:Tfgum2010 henkei prime.jpg|thumb|upright=1.66|So do mine!]]
*'''Convoy''' (2010)
**''Accessories:'' Smokestacks/laser cannon
{{toydesigner|[[Naoto Tsushima]] (packaging artist)}}

:The second Prime figure in the 2010 ''Gum'' line was this kit of his ''[[Transformers: Classics|Classics]]''/''[[Henkei! Henkei! Transformers (franchise)|Henkei! Henkei!]]'' body. As with the Generation 1 model, this figure is made from white, red and blue plastic and uses ''lots'' of stickers. It comes with the ''Classics''' figure's transforming smokestack/laser cannon weapon.

:Much like his aforementioned G1 self, his arms also need to be partformed into robot mode.
{{-}}

[[File:Tfgum2014_g1starconvoy.jpg|thumb|upright=1.66|But not mine!]]
*'''Star Convoy''' (2014)
**''Accessories:'' Cannon, Roller/ treads, car mode Hot Rodimus

:Released as part of the 8th wave of Kabaya's 2009 series of standard model kits, Star Convoy is a snap-together model kit that can transform into a futuristic big rig. Like the full-sized Star Convoy toy, this model kit can assume a battle station mode and also includes a diminutive and non-transformable Hot Rodimus in car mode that can interact with the base mode ramps. Like most other Kabaya model kits, Star Convoy has no paint applications and relies on stickers for added details.

:Owing to the original toy's simple engineering, Star Convoy does not require any disassembly to transform into robot mode, making him one of the few non-partforming Kabaya figures. He does, however, need to have his Microcarrier wheel base detached (which was also an option on the original toy) to fully access a significant improvement over his older self: some newly-added leg articulation! The Microcarrier also doubles as a shield that can be attached to the robot's left arm.
{{-}}

==Hero Set==
*'''Convoy''' (1985)
**''ID number:'' '''01'''
**''Accessories:'' Laser rifle
:A large ''keshigomu'' of Optimus Prime was produced by TakaraTomy licensee [[Maruka Toys]]. Packaged on a blister card, the static, unposeable Prime figure came with a removable laser rifle, and featured a few small stickers for colour and detail. Maruka also produced a Megatron figure in the same scale, and both Prime and he were available in red, yellow or green.
{{-}}

==Decoy==
[[File:Decoy optimus prime.jpg|thumb]]
*'''Cybertron Hero Collection 22''' (multi-pack, 1986)
*'''Defeat Trypticon Strategy Game''' (board game, 1986)
:Optimus Prime was among the many characters rendered by [[TakaraTomy|Takara]] as part of their series of 1.5" ''keshigomu'' figurines. Like all the Autobots in the series, Prime was molded in soft red rubber, and featured a number sculpted into his back that was the sum total of his [[Tech Spec]]s, for use in the various games that could be played with the figurines. Prime was available as part of a 22-piece box set of Autobot figures, as a playing piece in the Defeat Trypticon Strategy Game, and later, in a peach coloration randomly packed as part of various other box sets.

*'''Optimus Prime''' (1987)
**''Checklist number:'' '''31'''
:The Prime figurine was later brought over to [[Hasbro]] markets as part of the "[[Decoy (G1)|Decoy]]" promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (31, in Prime's case). Like all Autobot Decoys, he was a randomly-chosen pack-in available with the carded [[Throttlebot]]s, [[Aerialbot (G1)|Aerialbots]], [[Protectobot (G1)|Protectobots]] and [[Technobot (G1)|Technobots]].

::*''[http://www.tfu.info/1986/Autobot/Decoys/OptimusPrime/optimusprime.htm More information on Decoy Optimus Prime at TFU.info]''
{{-}}

==Knitting Pattern==
[[File:Transformers-knitting-pattern.JPG|thumb|Here to transform your sweater into something that will get your ass kicked.]]
*'''Wendy DK 3015''' (1986)
: Produced by U.K. company [[Wendy DK]] and designed by [[Joy Gammon]], this pamphlet contained patterns for two ''Transformers''-themed sweaters, one featuring Optimus Prime in robot mode, one featuring Optimus Prime in vehicle mode. The patterns were sized as Children's Large, so you're going to have to upscale it quite a bit if you want your <s>girlfriend</s> mom to knit you one.
{{-}}

==Vinyl figurine==
[[File:Optimus Prime Vinyl Figure set.jpg|thumb|upright=1.66|Vinyl Prime leads his decoys into battle [[Action Master|before the great storm]].]]
*'''Scramble Gun Set''' (1986)
**''Japanese ID number:'' '''Part.1'''
:Optimus Prime was one of several characters released by [[Seven]] and Takara as large vinyl figurines in a variety of different novelty sets. Prime came packaged with a roleplay pistol (the titular "Scramble Gun"), an Autobot badge, and four randomly assigned peach-colored decoy figures. In [[Ultra Magnus (G1)/merchandise#Vinyl figurine|"Part.2"]] of the set Prime is replaced by a vinyl Ultra Magnus.{{-}}

==Gold Convoy Trophy==
[[File:Gold Convoy Trophy.jpg|thumb|Thou will worship this golden convoy. Or Perish!]]
*'''Optimus Prime''' (trophy, 1988)
:A gold chrome trophy in the likeness of Optimus Prime was given as an award to an unknown number of distinguished [[TakaraTomy|Takara]] employees and as a [[Lucky Draw figure|Lucky Draw]] (alongside the [[Chromedome (G1)|Silver Chromedome Trophy]]) in [[TV Magazine]] in 1988. The two different releases have different plaques but appear to be otherwise identical. If you're an Optimus Prime merchandise completist, good bloody luck finding this one.
{{-}}

==''Generation 2''==
*'''Optimus Prime''' (Dairy Queen promotion, 1994)
[[File:DairyQueen Optimus.jpg|thumb|Rare, in a raw chicken sort of way.]]
:Released in Dairy Queen's 'Kid's Pick-Nic!' meals in 1994, this hunk of red and blue plastic is the first known Optimus Prime kids' meal toy and also probably the worst, sporting no transformation and zero articulation of any sort, with an included sticker sheet for detailing that doesn't particularly resemble any iteration of the character.

:These can be pretty hard to find, owing to their limited distribution compared to the average fast food promotion. Being pretty forgettable as toys probably didn't help either, if we're being honest.
{{-}}

*'''Optimus Prime Inflatable Bop Bag'''
[[File:OptimusPrime_G2_Inflatable_Bop_Bag.jpg|thumb|At last, merchandise for Decepticons!]]
:Released in 1993 by Kid Dimension, a subsidiary of Hasbro,<ref>[http://www.fundinguniverse.com/company-histories/hasbro-inc-history/]</ref> this 3 foot tall Inflatable Bop Bag featured the likeness of Optimus Prime above the Transformers Generation 2 logo. Supposedly to encourage kids to punch out Optimus Prime?
{{-}}

===ToonTown===
{{note|There's a longstanding debate on whether the obscure Korean-exclusive [[ToonTown]] figures and merchandise, allegedly released under official Hasbro licensing according to their packaging, are actually legitimate Transformers products or just bootlegs with fraudulent copyright information. Although there isn't a clear consensus from collectors and no statement from Hasbro on this matter as of {{CURRENTYEAR}}, we have nonetheless chosen to cover them here for the sake of archival and posterity.}}

[[File:Midam-Prime.jpg|thumb|upright=1.66|Maybe a licensed product, maybe a bootleg. Maybe it's in our definition of "toy," maybe it's "merchandise." ToonTown needs a {{w|Eddie Valiant|detective}}!]]
{{anchor|MidamIndustry}}
<ul class="iconlist">{{Bp-a2|'''Optimus Prime''' (Model kit, 1997)}}</ul>
:*''Accessories'': Blaster, left & right fists
: Notoriously odd [[South Korea]]n company ToonTown licensed the ''Transformers'' brand to model kit manufacturer [[ToonTown#Items released by Midam Industry|Midam Industry]], which in turn put out this surprisingly detailed and robust kit of the original Generation 1 Optimus Prime figure. It is fully transformable and about 3/4ths the size of the original toy. He does not feature his trailer, and his weapon design is substantially different from either of his classic blasters.

: Three color morphs have been found so far: original red arms and torso with blue head and legs, a mirrored version with red head and legs and a blue torso and arms, and one with all the aforementioned parts in blue.<ref>Reviews for a [https://m.blog.naver.com/eoiipp/130144214329 "standard"-colored Midam Optimus kit], an [https://blog.naver.com/parang16/20041871808 "inverted"-colored Midam Optimus kit], and an [https://blog.naver.com/nckim/70101680088 all-blue-colored Midam Optimus kit] on blog.naver.com</ref> This suggests that the colors which make up the two batch of parts might be randomized between blue and red, and as such; an as-of-now undocumented all-red version might also exist. All of his versions also have their chrome parts painted in metallic gold, a common oddity across ToonTown Primes as seen in the previous LALA figure.

: The figure comes with a batch of rather weird stickers, with text on his license plate and the sides of his truck mode that refers to him as "[[gbwiki:Dump Robo|Dump Robo]]".
{{-}}

[[File:LALA-PrimePencilCase.jpg|upright=1.66|thumb|Pope Leo XIV might have been selected on the
day that this image was uploaded, but pencil case Optimus might be the holiest thing that I've seen all day, hahaha... I'm going to hell, aren't I?]]
*'''LALA Pencil Case''' (1997)
:Possibly one of the most majestically quirky pieces of merchandise to have graced any Transformers character ever, this incredible pencil case from ToonTown licensee [[ToonTown#Items released by LALA|LALA]] is generally based around the design and transformation of the original Generation 1 Optimus Prime toy, but with ''a lot'' more than meets the eye to it: on top of being fully transformable from his robot mode to (an albeit rather flat) truck mode, he folds open to reveal space for the storage of several pencils and/or pens of your choosing, as well as including printed stickers for a time table and an address book, a drawer for the storage of extra school supplies, and a hidden thermometer that's revealed by lowering his head!

:Pencils can be attached to his shoulders to imitate his smokestacks, and his fists, which are removable for the transformation like in the original toy? They're erasers! Gah, how can an obscure, maybe even potentially fake piece of merchandise from 1990s South Korea have this much soul and creativity put into it! The fists can even be stored below the truck's front portion in vehicle mode, guaranteeing that you never lose them.

:He also includes a sticker sheet and a small 20cm ruler, featuring packaging art of himself plus ''Generation 2'' [[Megatron (G1)|Megatron]], [[Sideswipe (G1)|Sideswipe]], and [[Ramjet (G1)|Ramjet]], as well as pictures of their respective LALA eraser versions (the one for Optimus coming right up).
{{-}}

*'''Eraser''' (1997)
:Another piece of merchandise from ToonTown licensee LALA, this eraser also doubles as a small simple model kit, with his large colored bits being the "eraser" portion and the remainder of the toy being constituted of grey plastic parts that are assembled together. He transforms from robot to vehicle and back by [[Partformer|partforming]] his individual components.

:Although the advertisements and aforementioned ruler (as well as the few copies that we know of) feature his eraser bits in pink, it is possible that he might have also been released in bright green, as other LILA erasers that also show up as pink in promotional images have been found with this color instead.
{{-}}
*'''Watch''' (1997)
:Yet another LALA product, this Optimus Prime watch "transforms" by folding out of its compressed half-form and standing up as a simple fully-fledged little robot. His chest opens to reveal the titular watch. Said chest, along with his head, have an unusual gold chrome deco (a commonality across a handful of ToonTown products), and the box art is painted accordingly to reflect this.
{{-}}

==''Metalforce''==
[[File:MetalforceConvoy.jpg|thumb|I'm expensive! ''(Metallic Version Pictured)'']]
*'''Convoy''' (1999/2000)
**''Japanese ID number:'' '''MFC-01'''
**''Accessories:'' Ion Blaster, Autobot Matrix of Leadership, alternate hand, unpainted rifle, Matrix, helmet and hand

:''Metalforce'' Convoy is a large vinyl figurine produced by [[Time House]] sculpted to very closely resemble Optimus Prime as he appeared in the original television series, and at the time was the most accurate product depiction of Optimus Prime's cartoon appearance.

:The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his [[Matrix of Leadership/toys|Matrix of Leadership]], as is a ''[[The Transformers: The Movie|Movie]]''-style Matrix cover (not pictured). He also comes with an alternate hand that allows him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands, and helmet, which probably meant for those who wanted to duplicate them with resin and/or wish to modify/paint them...you know how garage kit modellers do.

:Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colors of the actual series, and a metallic-paint version (pictured), which is less [[show-accuracy|show-accurate]] but more shiny. The plain-colors version was the first release and have an Autobot symbol tampograph on his shoulder as per [[The Transformers (cartoon)|the cartoon]], while the later metallic-finish version instead came with a decal sheet.

{{-}}

==''Choro-Q''==
*'''Convoy''' (2000)

:''[[Choro-Q]]'' Convoy is a [[redeco]] of the Domra Truck toy from Takara's ''Choro-Q'' toyline of non-transforming [[super deformed]] vehicles. He was an [[exclusive]] at [[BotCon]] Japan 2000, and features a [[pull-back motor]] and a rear license plate that reads "BotCon Japan 2000".

:Along with ''Choro-Q'' [[Mirage (G1)|Ligier]] and [[Megatron (G1)/toys|Megatron]], Convoy was given out randomly to convention attendees. Each toy was limited to 1000 pieces.

==Super Collection Figure==
[[File:SCF Optimus.jpg|upright=1.66|thumb|#IGotPrimeOnIt]]
*'''Convoy''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

: A three-inch tall [[plastic|PVC]] figurine of Optimus Prime was available as part of the first wave of [[TakaraTomy|Takara]]'s ''[[Heroes of Cybertron (toyline)|Super Collection Figure]]'' line. Like all the figures in the wave, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve [[blindpacking|blindpacked]] figures.

{{-}}{{anchor|SCFaxe}}
[[File:SCF Optimus chase axe.jpg|upright=1.66|thumb]]
*'''Convoy with Ax''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

:Also available in the first ''Super Collection Figure'' wave was a rare "Secret Figure" version of Optimus (斧付きコンボイ, ''ono-tsuki konboi''), decorated in metallic paint and replacing his gun-wielding right hand with his [[energon-axe]].

: It was ''presumably'' released at a ratio of one per every ten cases; while this has not been officially confirmed, later waves gave these odds for Secret Figures.

{{-}}{{anchor|SCFtrailer}}
[[File:SCF Optimus Truck.jpg|upright=1.66|thumb|We're just as confused as you are, folks.]]
*'''Convoy (Trailer Mode)''' (2000)
**''Act'': '''2'''

:Part of the second ''Super Collection Figure'' act, this is the only ''SCF'' figure of a vehicle mode Transformer. As with the previous non-chase Prime figure, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve blindpacked figures.

: Unlike every other figure in the line (excluding build-a-figures), this one does ''not'' come with a figure stand, because... well, what would be the point?

{{-}}{{anchor|SCFMegaGun}}
[[File:SCF Optimus chase jetpack.jpg|upright=1.66|thumb]]
*'''Megatron & Convoy''' (2000)
**''Act'': '''2'''
**''Accessories'': Stand

:The second ''Super Collection Figure'' wave, like the first, also had its own Optimus Prime chase figure, this one wielding Megatron in gun mode and wearing [[Sideswipe (G1)|Sideswipe]]'s [[jet pack|rocket pack]], as seen in the [[The Transformers (cartoon)|original ''The Transformers'' cartoon]] episode "[[More than Meets the Eye, Part 3]]".

: This was presumably also released at a ratio of one per every ten cases.

{{-}}{{anchor|SCFdamage}}
[[File:SCF Optimus chase damage.jpg|upright=1.66|thumb]]
*'''Damaged Convoy''' (2001)
**''Act'': '''3'''
**''Accessories'': Stand

:There was no mass-release Optimus Prime figure for the third ''Super Collection Figure'' act, but there was another rare chase figure, this time a battle-damaged version of the original figure from the first act, referencing his injuries from ''[[The Transformers: The Movie]]''.

: Again, it was ''probably'' released in one out of every ten cases. He replaced the clear version of [[Bumblebee (G1)/merchandise#Super Collection Figure|Bumblebee]] in the case.

{{-}}{{anchor|SCFcom}}
[[File:SCF Optimus Comm.jpg|upright=1.66|thumb|He's actually checking his makeup.]]
*'''Convoy (B)''' (2001)
**''Act'': '''4'''
**''Accessories'': Stand

:For the fourth ''Super Collection Figure'' wave, Prime was rendered weaponless, speaking into the open communication panel on his left arm. Like all the figures in the fourth wave, Prime was available in both standard full color and metallic silver "pewter" versions, one of each of which was available in a standard case of twelve blindpacked figures.

: Care should be taken when moving the joints of the pewter version, as is not uncommon for the connector pegs to have gotten painted as well, resulting in stuck limbs and tearing joints. Shaving the interior of the socket slightly with a hobby knife is usually sufficient to relieve the issue. (This holds true for all other pewter figures on this list, and in fact the entire dang line from here on.)

: In eight out of every ten cases, the pewter version of Prime came packaged with the left arm of the collectible [[Metroplex (G1)#Super Collection Figure|Metroplex]] build-a-figure; these parts were either in full color or clear-plastic, packed at an equal ratio of four out of eight cases.

{{-}}{{anchor|SCFSilverMatrix}}
[[File:SCF Optimus chase silver.jpg|upright=1.66|thumb]]
*'''Convoy''' (2001)
**''Act'': '''5'''
**''Accessories'': Stand

:This version of Prime was a chase figure in the fifth ''Super Collection Figure'' act, and depicts the Autobot leader, rendered in metallic silver, opening the Matrix, referencing the end of "[[The Return of Optimus Prime, Part 2]]". This figure was packed in at a ''confirmed'' ratio of one per every ten cases.

{{-}}{{anchor|SCFMegatrongun}}
[[File:SCF Optimus Act6.jpg|upright=1.66|thumb|Shadow the Convoy, ow the edge.]]
*'''Convoy (C) with Megatron Gun Mode''' (2002)
**''Act'': '''6'''
**''Accessories'': Extra right fist, stand

:The sixth ''Super Collection Figure'' wave featured yet another mass-release version of Optimus. While this Optimus is wielding Megatron (using the same mold as the chase figure from the second Act), he has entirely new-mold arms, plus an interchangeable empty right fist. On top of that he was extensively redecoed: he's actually cast in different shades of light salmon plastic and heavily painted over in an overall darker, less saturated scheme, his normally-white parts now in medium-gray. His pec-windows are painted with a weird shiny dark blue that gives them a translucent look. The figure was available in both full color and pewter versions in an equal ratio.

: In eight out of every ten cases, the pewter version came with the head for the wave's [[Grand Maximus#Super Collection Figure|Grand Maximus]] build-a-figure, packed at a ratio of six color parts to two pewter per case.

{{-}}{{anchor|SCFStarConvoy}}
[[File:SCF Optimus Star Convoy.jpg|upright=1.66|thumb|Chonktimus Prime.]]
*'''Star Convoy''' (2002)
**''Act'': '''8'''
**''Accessories'': Stand

:After taking a break for the seventh wave, Prime returned for the eighth ''Super Collection Figure'' wave, which would prove to be the final Generation 1-themed set of figures. This figure of Prime in his Star Convoy body was available in both full color and pewter versions in an equal ratio.

:In eight out of every ten cases, the colored version came with the right arm for the wave's [[Scorponok (G1)#Super Collection Figure|Scorponok]] build-a-figure; this part could be in either full color or pewter, at a 4:4 ratio.

{{-}}{{anchor|ConvoySet}}
[[File:SCF Optimus Earth Obliteration.jpg|thumb|upright=1.66]]
*'''Special "The Earth Obliteration Plan": Exclusive Convoy Set''' ([[February 3|Feb 3]] 2002)
**''Accessories'': Stand

:Available exclusively at the Wonder Festival convention, this set includes two metallic-paint versions of Convoy figures from Act 2: the "Convoy w/ Megatron Gun" chase figure (minus the jetpack), and the truck-mode "figure".

: The set was limited to only 1000 units.

{{-}}{{anchor|ConfrontationSet}}
[[File:SCF Optimus Confrontation.jpg|thumb|upright=1.66]]
*'''TF Confrontation Set 01: Convoy vs Megatron''' ([[September 20|Sept 20]]-[[September 22|22]], 2002)
**''Accessories:'' Energon-axe

: Exclusive to the Tokyo Game Show 2002, this special set includes a new version of the original first-Act Optimus Prime figure, along with a new version of the first-Act Megatron. Both are cast in transparent plastic and completely painted over in a grimy, battle-damaged look. Both also come with the interchangeable energon-axe and mace weapons from their first-wave chase figures. Completing the theme of the set is the backdrop of the packaging interior, which depicts [[Sherman Dam]].

: Curiously, Optimus features the larger, rounded-off antennae of the [[Hasbro]] ''Heroes of Cybertron'' version of the mold, which was in production/circulation about the same time.

: As with the above Wonder Festival set, this set was also limited to 1000 units.
{{-}}
==Mega Super Collection Figure==
{{anchor|MSCF}}
*'''Convoy TV Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
*'''Convoy Metallic Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
{{-}}

==''Heroes of Cybertron''==
[[File:HOC Optimus.jpg|upright=1.66|thumb|Hey Spike, pull my finger.]]
*'''Optimus Prime''' (2002/2006)

: Part of the first wave of Hasbro's ''[[Heroes of Cybertron (toyline)#Heroes of Cybertron|Heroes of Cybertron]]'' series, Optimus is a [[redeco]] of the standard ''Super Collection Figure'' Optimus mold, with a ''slight'' [[retool]]ing to give him longer, thicker, rounded-off helmet antennae [[for safety reasons]]. Like all the standard ''Heroes'' figures, he is cast in transparent plastic, then painted over, save for the eyes and a small patch on the back of his head, giving him a [[light-piping]] gimmick. There are a few other small deco differences to the ''Heroes'' version, such as his helmet crest changing from white to gray.

: Optimus was re-released in 2006 as part of a short-lived ''Heroes of Cybertron'' revival, celebrating the 2006 DVD release of the original ''[[The Transformers: The Movie]]''. Cast in solid-white plastic rather than translucent blue, this makes him ''very'' similar to the original ''SCF'' toy, but he retained the thicker antennae, plus got some very minor paint changes on the head: his crest-vent went back to white, and oddly his eyes are white too, rather than the ''SCF'' version's chest-window light blue.

::*''[http://www.tfu.info/2002/Autobot/HoCOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime at TFU.info]''

{{-}}{{anchor|HOCApex}}
[[File:HOC Optimus Apex.jpg|upright=1.66|thumb|Don't tell anyone, but this crap is HEAVY!]]
*'''Powermaster Optimus Prime Apex Armor''' (2002)

: An unexpected addition to the line, especially in the first wave next to another Optimus (see above), "Apex Armor" Optimus is a [[redeco]] of [[Ginrai (robot)#Super Collection Figure|God Ginrai]], the double-armored-up form of Optimus's ''[[Fight! Super Robot Lifeform Transformers (franchise)|Super-God Masterforce]]'' lookalike [[Ginrai (robot)|Ginrai]]. There are a few small paint differences between God Ginrai and Apex Armor Prime (beyond the obvious "opaque vs clear-plastic base figure" thing, we mean), most notably that the many parts on God Ginrai that are darker unpainted gray plastic, like the thighs and side-panels/guns on the lower legs, have been painted the same light gray as the chest on Optimus.

: This is the first Hasbro-release depiction of Optimus in this mode, later backed up with the release of the full-fledged toy of [[Optimus Prime (G1)/toys#PMOP|Powermaster Optimus Prime]] with [[Apex Bomber]] the following year.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeApexArmor/optimusprime.htm More information on ''Heroes of Cybertron'' Powermaster Optimus Prime Apex Armor at TFU.info]''

{{-}}{{anchor|HOCaxe}}
[[File:HOC Optimus Axe.jpg|upright=1.66|thumb|Energon Axe: Only used in [[More than Meets the Eye, Part 2|one episode]]. Ever.]]
*'''Optimus Prime''' (2002)

:This second-wave ''Heroes of Cybertron'' release is a variation of the chase figure from the first ''Super Collection Figure'' wave, depicting Prime with his right hand replaced with his energy axe. This figure is a little different from its Japanese progenitor (beyond the "clear-plastic painted over" deal, of course), being painted in normal matte/gloss rather than metallic paint, and replacing the left "pointing" hand with the clenched fist of the later "communicator" version of Optimus. It also retains the ''Heroes'' molding alterations to Optimus's helmet.

: Oddly, he comes with the same collector card as the first version, and the packaging does not call out the energy weapon in any way. The card-back cross-sell even shows only the original Optimus. (The same happened to this wave's energy-weapon-wielding [[Megatron (G1)/merchandise#Heroes of Cybertron|Megatron]].)

::*''[http://www.tfu.info/2002/Autobot/HoCAxeOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Plasma Weapon at TFU.info]''

{{-}}{{anchor|HOCSpark}}
[[File:HOC Optimus Spark Attack.jpg|upright=1.66|thumb|This can't be [[Spark attack|Spark Attack]]! His is so energetic that... he BURNS.]]
*'''Powermaster Optimus Prime Spark Attack''' (2002)

: In a yet another unusual choice for the line, this second-wave figurine is a redeco of the first God Ginrai/Powermaster Prime Apex Armor PVC figure, cast in translucent orange plastic with red gradients and flame detailing, depicting a "spark attack" mode.

: This is a variant of the ''Super Collection Figure'' "God Fire Guts" God Ginrai chase figure, which had been rendered entirely in solid metallic gold paint.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeSparkAttack/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime Spark Attack at TFU.info]''

{{-}}{{anchor|HOCComm}}
[[File:HOC Optimus Comm.jpg|upright=1.66|thumb|You won't believe where I'm calling you from!]]
*''' Optimus Prime with Communicator''' (2003)

:This fifth-wave ''Heroes of Cybertron'' figure is a release of the Prime figure from the fourth ''Super Collection Figure'' wave, depicting a weaponless Prime talking into the communicator in his left arm. He retains the helmet alterations of the previous versions of the figure.

: This toy also came with the head and weapons for the wave's collectible [[Metroplex (G1)#Heroes of Cybertron|Metroplex]] build-a-figure.

::*''[http://www.tfu.info/2003/Autobot/HoCCommunicatorOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Communicator at TFU.info]''

{{-}}

==Hard Hero==
[[File:HardHero OptimusPrime bust.JPG|thumb|upright=0.85]]
*'''Optimus Prime''' (Bust, 2002)

: Optimus Prime was the first ''Transformers'' bust released by [[Hard Hero]]. He is approximately six inches tall at the head (8.5 at the gun) and is made out of cold-cast porcelain. There were also a version of the bust signed by the sculptor, limited to 100 samples.

{{-}}

[[File:HHero OptimusStatue.jpg|thumb|Not there. There!]]
*'''Optimus Prime''' (Full figure statue, 2003)

:Hard Hero also created a 13-inch tall Optimus Prime statue. It is sculpted pointing with his left hand while holding his ion rifle in his right.

{{-}}

==MyClone==
[[File:Prime-Myclone.jpg|upright=1.67|thumb]]
*'''Optimus Prime (2003)'''
**''Japanese ID number:'' '''MFT001''' and '''MFT006'''
**''Accessories:'' Display base
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

: Optimus Prime was released three times in the [[MyClone]] line, all in the first wave of toys. He was released in both robot and truck mode, while a clear Optimus in robot mode was one of two chase figures along with a clear Megatron.
{{-}}

==Generation 1 Figure-Collection==

[[File:Bottlecap prime gun.JPG|thumb]]

*'''Convoy (gun)''' (2003)
**''Japanese ID number:'' '''C-1'''
**''Accessories:'' Display base

:At only one inch in height, this Optimus "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's Transformers [[Generation 1 Figure-Collection]]. The figure was rendered in both a standard "retro" black and white color scheme, and [[:File:Bottlecap chase prime.jpg|a rare full-color]] [[chase figure|chase]] version, and came with a leaflet, personalized with cartoon screen captures.
{{-}}
[[File:Bottlecap prime pointing.JPG|thumb]]
*'''Convoy (pointing)''' (2003)
**''Japanese ID number:'' '''C-2'''
**''Accessories:'' Display base

:The second Prime figure in the Generation 1 collection was much like the first, only sculpted with an empty hand, pointing off into the distance like a lot of Optimus Prime figures are wont to do.
::*''[http://snakas.web.fc2.com/misc_item/kabaya_bottle.htm More information on the Bottlecap Collection at Autobase Aichi]''

{{--}}

==KT Figure Collection==
[[File:Optimus_Prime_KT.jpg|upright=1.66|thumb|Thanks for helping me... [[City of Steel (episode)|pull myself together.]]]]
*'''Convoy''' (KT Figure Collection, 2004)
: This figure was designed by [[Yuki Ohshima]] and produced by [[KT Figure Collection]]. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in ''[[The Transformers: The Movie]]''.

{{-}}{{anchor|KTFCRevival}}
[[File:Optimus_Prime_ex_KT.jpg|upright=1.44|thumb|No, I am [[redeco|NOT]] [[Ultra Magnus (G1)|Ultra Magnus]]! I'm silver, not [[:File:Magnuslongshot.jpg|white]]]]
*'''Convoy "Revival version"''' (''[[Figure Ō]]'' exclusive, 2004)
: The 82nd issue of the hobby magazine ''[[Figure Ō]]'' came with a [[redeco]] version of Optimus Prime's mini bust. It is painted completely silver, making him appear to be coated with the special alloy from "[[The Return of Optimus Prime, Part 2]]".

{{-}}

==Palisades==
[[File:Palisades WarWithinPrime.jpg|thumb]]
*'''The War Within Optimus Prime''' ([[Palisades Toys|Palisades]], 2005)

:'''The War Within'' Optimus Prime is a six-inch-tall polystone mini statue based on his appearance in the popular [[War Within (franchise)|''War Within'' comic book series]]. Prime stands on a silver Autobot-insignia stand, is decorated with dirt to simulate battle damage, and has articulation in his head and arms. The statue was limited to 1500 pieces worldwide.

{{-}}

==''Titanium Series''==
[[File:TitaniumRMWWPrime.jpg|thumb|Descend, Squattimus Prime.]]
*'''War Within Optimus Prime''' (3" Robot Masters, 2006)
**''Accessories:'' Ion Blaster, display stand

: ''War Within'' Optimus Prime is the second toy representation of Optimus Prime as he appears in ''War Within''. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

: He is squat. Very squat.

{{-}}
{{anchor|TitaniumG1}}
[[File:TitaniumRMG1Prime.jpg|thumb|Drop and give me twenty, soldier!]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand

: The first Titanium representation of G1 Optimus Prime has a well-proportioned sculpt based on his 20th Anniversary toy. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

{{-}}
{{anchor|TitaniumG1BattleDamage}}
[[File:TF-Titanium-Series-3-inch-Robot-Masters-Battle-Damaged-Optimus-Prime.jpg|thumb|"Drop dead and give me 20!"]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand
: This is a repaint of the 3" G1 Optimus Prime titanium figurine, with a 'battle-damaged' deco.
{{-}}{{anchor|tit2pack}}
[[File:Titanium-Series-Optimus-Prime-and-Bumblebee-2pack.jpg|thumb|"You! YOU STOLE MY LAST CESIUM SALAMI!"]]
*'''Optimus Prime & Bumblebee''' (2-pack, 2007)
**''Accessories:'' Ion Blaster, display stand
: A Toys 'R' Us [[exclusive]] two-pack, this set features "Supermetal Finish" (read: shiny) versions of the "Robot Master" ''Titaniums'' Optimus Prime and Bumblebee.

{{-}}

==First 4 Figures==
[[File:First 4 Figures Battlefield Optimus vs Megatron.jpg|thumb|upright=1.66]]
*'''Optimus Prime vs Megatron''' (2006)
**''Accessories:'' extra head for Megatron (with detachable helmet), extra hand for Optimus Prime
{{toydesigner|[[Little IroN]] (concept artist), [["Mad" Alterton]] (sculptor), [[Leandro Sivori]] (painter)}}

:The first entry in the ''Transformers Battlefield'' line by model company [[First 4 Figures]], this 13-inch tall diorama depicts Optimus Prime slugging it out with Megatron. Optimus is posed as though doing a shoulder shove while holding his ion blaster, but a provided "REP" (Replaceable Exterior Part) hand allows buyers to instead recontexualise the pose as a spinning backhand slap. Megatron comes with a REP of a battle damaged version of his head, which features a detachable "helmet" to show off his exposed robo-brain.

:The model was limited to 1,850 pieces worldwide, and came with a numbered certificate of authenticity, which allowed buyers to reserve the same number on their next purchase in the series. It also came with an A4 mini-poster depicting the same fight between Optimus and Megatron by artist [[Little IroN]], which was also sold separately as a limited edition A2 poster.

:As a ''Transformers Battlefield'' release, this model featured a detailed base designed to interlock with others in the same range to create a massive battle diorama. Unfortunately, a general discontinuation of First 4 Figures' ''Transformers''-related output put the kibosh on any further ''Battlefield'' models.

{{-}}{{anchor|F4F1}}
[[File:SnakeEyes OptimusPrime statue.jpg|thumb|upright=1.66|Get with the program.]]
*'''Optimus Prime and Snake Eyes''' (<s>2006</s> unreleased)

:Initially announced at UK Toy Fair in 2006<ref>[https://news.tfw2005.com/2006/01/25/first4figures-beast-wars-and-transformers-vs-g-i-joe-statuesbusts-4267 "First4Figures Beast Wars and Transformers VS. G.I. Joe Statues/Busts"] at TFW2005.com</ref> with a second showing at New York [[Toy Fair]] the following month,<ref>[https://tformers.com/transformers-/5568/news.html "Toy Fair 2006 - First4Figures TF & GI Joe Statues& Busts"] at tformers.com</ref> "Optimus Prime and Snake Eyes" was intended to be one of the first releases in First 4 Figures' ''[[G.I. Joe vs. the Transformers]]'' comic tie-in subline. This 8-inch tall bust depicted a one-armed Optimus Prime in the [[Cobra]] [[H.I.S.S. tank|HISS tank]] body he used in that series holding a battle-ready [[Snake-Eyes#First 4 Figures|Snake Eyes]], directly recreating the cover to the [[G.I. Joe vs. the Transformers issue 1|first issue]] of the comic (originally drawn by [[Mike S. Miller]]).

:Unfortunately, this statue was a casualty of F4F's discontinuation of ''Transformers'' product, the result of a challenging marketplace and lack of retailer interest.
{{canceledtoy}}

{{-}}{{anchor|F4F2}}
[[File:StormShadow OptimusPrime statue.jpg|thumb|upright=0.85|Hey, Private Haircut! I might have taken a bit too much off...YOUR HEAD!]]
*'''Optimus Prime vs Storm Shadow''' (2007)
{{toydesigner | [[Siamak Roshani]], [[Joel Chen]] (sculptors)}}
:The third reveal in the ''G.I. Joe vs. the Transformers'' series, this statue is 7.5 inches tall and depicts [[Storm Shadow#First 4 Figures|Storm Shadow]] in a victorious stance on Prime's damaged, disembodied head, based on the cover of [[G.I. Joe vs. the Transformers issue 5|''G.I. Joe vs. the Transformers'' issue 5]] (also by Miller). Storm Shadow is only a mite bigger than your standard 3.75" ''G.I. Joe'' figure, making this statue roughly in scale with the rest of your collection!

:After being revealed at [[San Diego Comic-Con]] in 2006,<ref>[https://tformers.com/ig.php?mode=album&album=6265&dispsize=800&start=0 Tformers.com's SDCC 2006 gallery]</ref> "Optimus Prime vs Storm Shadow" was released in January 2007, holding the dubious honour of being the only one of First 4 Figures' ''G.I. Joe vs. the Transformers'' range to see release. The statue was limited to 250 pieces in the U.S., and 250 pieces in the UK.

::*''[https://www.yojoe.com/archive/statuary/stormshadowprime/ More information on Optimus Prime vs Storm Shadow at YoJoe.com]''

{{-}}

==Diamond Select==
[[File:Optimus Prime Mini-bust.jpg|thumb|"I can't roll out without my legs installed!"]]
*'''Optimus Prime''' (Diamond Select, 2007)
:A mini-bust of Optimus Prime based on his appearance in the comic was released by [[Diamond Select Toys|Diamond Select]] in 2007. The figure includes the upper body of Optimus Prime, carrying his laser rifle and posed as if preparing to charge. The Matrix of Leadership is sculpted into the base of the statue.

{{-}}
[[File:Ark Globe.jpg|thumb]]
*'''Autobot Snow Globe''' (Diamond Select, 2007)

:Optimus Prime is also featured in Diamond Select's Autobot-themed snow globe, posing above a [[Mount St. Hilary]] base which also features the ''[[Ark (G1)|Ark]]'' and [[Omega Supreme (G1)|Omega Supreme]]. The globe was sculpted by [[Art Asylum]].

{{-}}

[[File:DST08 FinalBattlePrimeBust.jpg|thumb|Hold this for a moment won't you.]]
*'''Final Battle Optimus Prime''' (Diamond Select, 2008)
:Final Battle Optimus Prime was exclusive to the online retailer Action Figure Xpress. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and limited to 1000 pieces. Optimus Prime is shown after his climactic battle with Megatron during Transformers: The Movie; shortly before he passed the Matrix of Leadership (which is also removable here) to Ultra Magnus. His base features the life support readout that monitored both his declining health and eventual death.

{{-}}

{{anchor|G1AnimatedOptimusPrimeBust}}
[[File:DST SDCCToonPrimeBust.jpg|thumb]]
*'''G1 Animated Optimus Prime''' (Diamond Select, 2008)
:G1 Animated Optimus Prime was exclusive to the 2008 San Diego Comic Con. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and features a more matte color scheme to better match the cartoon's palette.

{{-}}

[[File:DiamondSelect PowermasterOptimus.jpg|thumb|"It's not great to be back."]]
*'''Powermaster Optimus Prime''' (Diamond Select, 2010)

:This fourth Optimus Prime bust was to be based on his [[Powermaster]] incarnation, but appears to have been canceled.

{{canceledtoy}}

{{-}}
[[File:DiamondSelect OptimusPrime bustbank.jpg|thumb|"Saving Money is the right to all Sentient Beings".]]
*'''Optimus Prime Bust Bank''' (Diamond Select, 2010)

:A 6-inch hollow Optimus Prime bust to keep your spare change safe! It would've featured articulation in its shoulders and neck, but like the Powermaster bust, it never saw release.

{{canceledtoy}}
{{-}}

==''Transformers'' (2007)==
*'''Optimash Prime''' (2007)
{{main|Optimash Prime}}
{{-}}
[[File:Softimus Prime.jpg|thumb|Freedom is the right of all sentient beings... in bed.]]
*'''Softimus Prime''' (2007)

:Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He features Movie-style faction symbols on his right arm and both sides of his cab mode. He is love.

::*''[http://www.tfu.info/2007/Autobot/SoftimusPrime/softimusprime.htm More information on Softimus Prime at TFU.info]''

{{-}}

==''Robot Heroes''==
[[File:RH Optimus vs Ravage.jpg|thumb|upright=1.66|Mini-Me!]]
*'''Optimus Prime & Ravage''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Part of the first wave of ''[[Robot Heroes (toyline)|Robot Heroes]]'' 2-packs (sold under the [[Transformers (2007 toyline)|2007 live-action-movie line]] branding), Optimus Prime is a simple, yet well-detailed two-inch tall figurine with exaggerated, cartoony proportions, with swivel articulation at the neck and shoulders. He is sculpted holding his Ion Blaster rifle in his right fist and his left arm in a pointing pose. He is also love, and demands that you pull his [[More than Meets the Eye, Part 3#Notes|Finger of Doom]].

: He was sold in a two-pack with [[Ravage (G1)/toys#Robot Heroes|Ravage]], positioned in a way that gives an impression of [http://orig12.deviantart.net/b22b/f/2008/216/7/1/optimus_prime_vs_ravage_by_cobaltkitty.jpg him freaking out to Ravage's size].

: This version of Optimus was later also released as part of a set with a 100-piece [[jigsaw puzzle]] with no apparent changes.

{{anchor|RHBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: In some countries outside of North America, Optimus Prime was released individually in a blindpack with no notable changes.

{{-}}{{anchor|RH5pack}}
[[File:Robot Hero Supermetal Optimus Prime.jpg|thumb|upright=0.99|Cuteness is the right of all sentient beings.]]
*'''Decepticon Sneak Attack''' (Multi-pack, 2007)

: "Optimus Prime with Supermetal Finish" is a slightly-shinier [[redeco]] of the previous ''Robot Heroes'' figure; this is the most noticeable with his blue parts, which are now in a much brighter, richer gloss-blue paint rather than the unpainted darker-blue matte plastic of the two-pack version.

: He came in a [[Walmart]] exclusive multipack, alogn with [[Mirage (G1)/toys#RH5pack|Hologram Mirage]], [[Cliffjumper (G1)/toys#Robot Heroes|Cliffjumper]], "Supermetal Finish" [[Megatron (G1)/merchandise#RH5pack|Megatron]], and [[Skywarp (G1)/toys#Robot Heroes|Skywarp]].

{{anchor|RHFinishBlindpack}}
*'''Optimus Prime with Supermetal Finish''' (Single-pack, 2008)

: "Supermetal Finish" Optimus Prime also saw release in a blindpack outside of North America.

{{-}}{{anchor|RHUnicron}}
[[File:RH Prime vs Unicron.jpg|thumb|upright=1.66|'Til all are cute.]]
*'''Optimus Prime & Unicron''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Sold in the third wave of ''Robot Heroes'', this version of Optimus is posed opening the [[Matrix of Leadership]], complete with clear-plastic shine.

: He was packed with a very small [[Unicron/toys#Robot Heroes|Unicron]].

{{anchor|RHMatrixBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: Just like the previous figures, the Matrix-bearing Prime also received a blindpacked release.
{{--}}

==''Attacktix''==

*'''Optimus Prime''' (Starter Set, 2007)
[[File:Attacktix Optimus Prime.jpg|thumb|He shoots sideways. The direction, not [[Sideways (Armada)|the character]].]]
{{attacktix
|ID=TF2-19
|faction=Autobot
|class=Leader
|special=Last Stand - 13/26 (50%) success ratio
|cost=40
|speed=6
|attacktype=Shooter (Force Blast)
}}
{{-}}
:Optimus Prime will shoot you down. He was released as part of the 2007 Starter Set along with ''[[The Transformers (franchise)|Generation 1]]'' [[Megatron (G1)/toys|Megatron]], ''[[Transformers: Energon (franchise)|Energon]]'' [[Landquake (Energon)|Landquake]] and ''[[Transformers: Cybertron (franchise)|Cybertron]]'' [[Skywarp (Armada)|Skywarp]].

:Optimus' Last Stand special allows him to stand up if he's the only figure in your team left in play. If you're down to two men you might even be tempted to shoot your own man just to keep Optimus Prime in play. Don't though. [[Peter Cullen]] wouldn't approve.

:Sadly you can't bring him into play with the ''Cybertron'' [[Optimus Prime (Armada)/toys|Super Optimus Prime]] vehicle mode because he's not ''Super'' Optimus Prime.
{{-}}

==''Revoltech''==
[[File:Revoltech Convoy.jpg|thumb|upright=1.66|Windowbra! ''(2007 Version pictured)'']]
*'''Convoy''' (2007/2014)
**''Series number:'' '''019'''
**''Legacy of Revoltech ID number'': '''LR-008'''
**''Accessories:'' Ion blaster, Autobot Matrix of Leadership, two clenched fists, gun-wielding right hand, pointing right hand, open left hand

:A non-transforming but ''highly'' articulated Optimus Prime action figure, ''[[Revoltech]]'' Convoy uses the ''Revoltech'' "revolver joints" for maximum poseability. Prime comes with his now-standard ion blaster and Matrix of Leadership accessories, as well as a few alternate hands; while one of the hands is specifically designed to grip the ion blaster, he can't really do anything dramatic with the Matrix, and it just sort of sits in his open-palmed left hand. His sculpting is explicitly in the style of [[Pat Lee|Pat "serfdom" Lee]]'s interpretation of Prime, but due to physical constraints has no lack of perspective.

:Unsurprisingly, this mold was redecoed to create ''Revoltech'' [[Ultra Magnus (G1)/merchandise#Revoltech|Ultra Magnus]]. Magnus comes with a new hand mold that can be used to connect him and Prime together in a handshake.

:The initial reveal of the figure (sculpted by Yamaguchi) features swiveling cut joints instead of "revolver joints" (notably the hip parts), with a rather jarring angled joint on the waist (which results in a "sliced" appearance if swiveled).

:Unfortunately, ''Revoltech'' Convoy cannot be distributed to the US due to licensing restrictions, so fans must rely on online hobby shops to import him.

:In 2014, ''Revoltech'' Convoy was reissued as part of the ''Legacy of Revoltech'' line, with an increased price of 3900 yen. This rerelease uses revised Revoltech joints, which come in matte black instead of glossy and have more ratcheting points than previous releases.
{{-}}
===''Amazing Yamaguchi''===
[[File:Tf-Yamaguchi-Revoltech-014-Convoy.jpg|upright=1.66|thumb]]
*'''Convoy''' (2019)
**''Series number:'' 014
**''Accessories:'' Ion Blaster, Energon Axe, 1 pair of splayed hands, 1 pair of trigger hands, left clawed hand, right pointing hand, interlocked hand

:''Amazing Yamaguchi'' Convoy is an all-new take to the Revoltech figure above, but more poseable. Apart from the Ion Blaster, this figure comes with an Energon Axe accessory, and an interlocked hand accessory that is designed to resemble the haymaker that took down Megatron in ''[[The Transformers: The Movie]]''.

:Unlike the first Revoltech figure, Convoy features painted-details-on-colored-plastic rather than fully coating them. The plastic is noted to have a hollow feel compared to the first figure.

:Due to production delays, the release date was rescheduled from September 29 to October 24.
{{-}}

==Sota Toys==
*'''Transformers Chess Set''' (<s>2007</s>)
:An Optimus Prime piece was to be the Autobot-side King on a [[Chess#Sota Toys|chess set]] based on Generation 1, but the set apparently never saw release.
{{canceledtoy}}
{{-}}

==Ornaments==
*'''Optimus Prime''' (2007)
[[File:OptimusPrimeG1Ornament.jpg|thumb|100px|''(American Greetings version pictured)'']]

:Manufactured by [[American Greetings]] as part of their Heirloom ornament collection, this hanging sculpt of Optimus Prime is based upon the 20th Anniversary toy release.
{{-}}

*'''Optimus Prime''' (2014)
[[File:Optimus-prime-keepsake-Hallmark.jpg|thumb|''(Hallmark version pictured)'']]
:Manufactured by [[Hallmark]] as part of their Keepsake ornament collection as part of the Hasbro series which includes ornaments based on [[My Little Pony]] G1, the electronic game Simon, and the board game Sorry, this hanging sculpt of Optimus Prime is based upon the original G1 toy cab in robot mode posed like 1984 box art.
{{-}}

==''Mighty Muggs''==
[[File:MightyMuggs OptimusPrime.jpg|thumb|Optimus lost his ears in the rock tumbler.]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: This [[super deformed]], non-transformable Optimus Prime figure uses the standard [[Mighty Muggs]] body template, with swivel joints in his neck and limbs. He comes with a similarly super-deformed version of his ion rifle.
{{-}}

{{anchor|SDCCmightymugg}}
[[File:MightyMuggs MetallicOptimusPrime.jpg|thumb|Optimus, did you polish your head in the Shine-O Ball-O?]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: An [[exclusive]] to the 2009 [[San Diego Comic-Con]], this Optimus Prime Mugg has a shiny metallic finish.
{{-}}

{{anchor|2018mightymugg}}
[[File:MightyMuggs 2018 Optimus.jpg|thumb|upright=1.44|You ever get so mad you sprout new ears?]]
*'''Optimus Prime''' ([[2018]])
**''ID number:'' '''01'''

: Based on his [[evergreen]] design, this Optimus is part of the 2018 ''Mighty Muggs'' relaunch. As part of the new line, he has a helmet that can be pressed down to change his expression. He features three different faces: [[Mouthplate|classic]], angry, and angrier.
{{-}}

==Transformers Wacky Wobblers==
[[File:WackyWobblers G1OptimusPrime.jpg|thumb|upright=0.85]]
*'''Optimus Prime''' (2009)

: This Optimus Prime {{w|bobblehead}} is part of the popular ''[[Wacky Wobblers]]'' line produced by {{w|Funko}}. Aside from the standard-issue big wobbling head, he features an ion rifle molded onto his right hand and his arms swivel at the shoulders. Optimus is affixed to a base with his name on it.
{{-}}

==USB-Powered Speaker Head==
*'''Optimus Prime USB-Powered Speaker Head'''
[[File:G1-optimusprime-merc-speaker.jpg|thumb]]
: As a 6.5" figure, Optimus Prime's head contains twin {{w|Universal Serial Bus|USB}}-powered speakers. There are two speakers inside each side of his head. The control panel, USB port, and earphone port are located in the back of the head. Under the neck, there is a display to support the head.
: The speaker was redecoed to create Ultra Magnus Speaker.
{{-}}

==Transformers Backpacks==
*'''Optimus Prime''' (2009)

:Made by [[F*A*B Starpoint]], these backpacks are allegedly "engineered for style, safety, comfort... and saving the Universe!" The Generation 1 Optimus Prime design features a stock silhouette of Optimus Prime surrounded by stars, like the [[Paramount Pictures]] logo, while on the lower compartment there is a gigantic Autobot sigil.

==Universal Studios==
*'''Optimus Prime plushie''' (2011)

:Created for the [[Transformers: The Ride – 3D|Transformers ride at Universal Orlando]], a [[super deformed]] plush toy of Optimus was made available at the Supply Vault gift shop near the opening of the ride.

==Tomica==
[[File:TF-Tomica-Wrapping-Trailer.jpg|thumb]]
*'''Transformers Wrapping Trailer''' (2011)
:''[[Tomica]]'' "Transformers Wrapping Trailer" is a die-cast, non-transforming semi tractor-trailer. A redeco of the 2008 "[[wikia:tomica|Tomica Hero: Rescue Force Trailer]]" toy, "Transformers Wrapping Trailer" renders the cab in Generation 1 Optimus Prime colors, while the trailer is decked out with pictures of [[live-action film series]] [[Optimus Prime (Movie)|Optimus Prime]], [[Bumblebee (Movie)|Bumblebee]] and [[Ironhide (Movie)|Ironhide]]. Like all Tomica toys & all [[Go-Bot (G2)#Toys|''Generation 2'' Go-Bots]] and [[Spychanger]]s, Wrapping Trailer features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces.
{{-}}

==Transformers x Mimobot==
[[File:Mimobot OptimusPrime.jpg|thumb|upright=1.66|Why the long face?]]
*'''Optimus Prime Mimobot''' (Mimoco, 2011)
:Produced by [[Mimoco]] as part of their multi-brand line of designer USB "Mimobot" flash drives, this Optimus Prime memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.
{{-}}

==Cuponk==
[[Image:NYCC2011 Cuponk.jpg|thumb|250px|The real contest is whether Prime's medal or Megatron's belt is cooler.]]
*'''Transformers Cuponk''' (2011)
:A New York Comicon exclusive, this set includes two Cuponk cups and 6 ping pong balls. Prime is featured on one cup and one ping pong ball. The same cup also features [[Bumblebee (G1)|Bumblebee]], [[Jazz (G1)|Jazz]], [[Grimlock (G1)|Grimlock]], and [[Hot Rod (G1)|Hot Rod]].
{{-}}

==Titan Warriors==
[[File:Titan-Warrior-Optimus-Prime.jpg|upright=1.11|thumb|Sofubi Hero figures are the right to all young sentient beings.]]
*'''Titan Warrior 5-Pack''' (2013)
:Available at San Diego Comic Con 2013, This Optimus Prime is a 6" PVC Titan Warrior figure (similar to Bandai's ''Ultra/Sentai/Rider Hero, Movie Monster Series'') representing his Generation 1 character. He was packed with [[Grimlock (G1)/toys|Grimlock]], [[Megatron (G1)/toys|Megatron]], [[Starscream (G1)/toys|Starscream]] and [[Soundwave (G1)/toys|Soundwave]].

*'''Optimus Prime''' (Titan Warrior, 2014)
:The Titan Warriors Optimus Prime toy was released individually, under the Beast Hunters Titan Heroes subline.

{{-}}

==''The Loyal Subjects''==
*'''Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Talking}}
*'''Talking Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Larger}}
*'''Talking 5.5" Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Blank}}
*'''8" Blank/DIY Optimus Prime''' (2014)
{{anchor|The Loyal Subjects OG}}
*'''8" OG Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Fiberglass}}
*'''4' Fiberglass Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Hot Topic}}
*'''Talking 5.5" Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Dead}}
*'''8" Dead Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Silver}}
*'''8" Silver Bullethole Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Gold}}
*'''8" Gold Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Black Gloss}}
*'''8" Black Gloss Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Gamestop}}
*'''Talking Optimus Prime''' (2014)
{{charstubtoys}}
{{-}}

==''Mecha Nations''==
[[File:klog tfop 003.jpg|thumb|upright=1.66|Prime, not the shrink wrap!]]
*'''Optimus Prime''' (2014)
**''ID Number:'' '''MN01'''
**''Accessories:'' Ion Blaster, Energon Axe, Removable Armor.

:Created by [[Kids Logic]], this [[super deformed]] G1 Optimus Prime stands 6" tall and is articulated. He features a metallic color scheme, removable armor and replacement hands. He also features LED light up eyes, lights, weapons and [[Matrix of Leadership|Creation Matrix]].

:This figure was also redecoed into Mecha Nations [[Nemesis Prime (G1)#Mecha Nations|Black Convoy]] and [[Ultra Magnus (G1)/merchandise#Mecha Nations|Ultra Magnus]].

{{-}}

==''Ultimetal''==
[[File:Ultimetal-UM01-Optimus-Prime.jpg|upright=1.66|thumb|"Why waste your money so easily Prime?"]]
*'''Optimus Prime''' (2014)
**''ID number:'' '''UM-01'''
**''Accessories:'' Ion blaster, energon-axe, small Matrix, 24 armor pieces, 2 smokestacks, large Matrix, display stand, 8 display stand parts, remote control

: ''Ultimetal'' Optimus Prime is a large non-transforming figure produced by [[Art Storm]], standing at an impressive 1 foot 4 inches/43 cm and made from extensive [[die-cast]] metal. Packaged in four different boxes, he features plenty of articulation and detail, including an opening chest and numerous magnetically attached armor panels that, when removed, reveal Prime's internal anatomy. He also has electronic light-up eyes and roof lights as well as 20 spoken English phrases, all activated via remote control. His [[mouthplate]] even moves when he talks, just like in the cartoon!

: Prime comes with an ion blaster which can also be opened to reveal technical detail, an energon-axe, and two Matrices of Leadership of different sizes. The smaller one fits into his chest, where it can be lit up by an LED, while the larger one lights up on its own and can be held in his hands or placed on display. Prime's display stand has smaller stands for the Matrix and ion blaster and also has light-up parts.

: Optimus Prime was recolored into the inner robot of ''Ultimetal'' [[Ultra Magnus (G1)/merchandise#Ultimetal|Ultra Magnus]].

::*''[http://artstorm.co.jp/ultimetal_optimusprime.html More information on ''Ultimetal'' Optimus Prime at Art Storm's official site]''

*'''Optimus Prime - Battle Damaged''' (2018?)
**''ID number:'' '''UM-01BD'''

{{-}}

==''EX Gōkin''==
[[File:EXGokin Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2014)
**''Accessories:'' Two fists, two open hands, two gripping hands, right pointing hand, ion blaster, energon-axe, display stand

: A 6.6-inch tall non-transforming Optimus Prime action figure was produced by Art Storm as part of their ''EX Gōkin Transformers Series'' line. He comes with his trademark blaster and energon-axe as well a number of extra hands, and his chest opens to reveal a non-removable Matrix.

::*''[http://artstorm.co.jp/exgokin_transformersseries_convoy.html More information on ''EX Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==Hikari==
[[File:HikariLimitedEditionMetallicOptimusPrime.jpg|thumb|upright|150px]]
*'''Metallic Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime with a metallic finish. This figure is a limited edition, and limited to 2,000 pieces.

:This mold was also used to make the other limited edition Optimus Primes seen below.

{{-}}
[[File:HikariLimitedEditionClearGlitterOptimusPrime.jpg|thumb|upright|150px]]
*'''Optimus Prime Clear Glitter''' (2014)

:A non-transforming vinyl Optimus Prime figure. While retaining the classic, original colors, this mold is redone to be clear plastic, with glitter bits put into the figure. This vinyl is a limited edition, and limited to 3,000 pieces.

{{-}}
[[File:HikariLimitedEditionBattleReadyOptimusPrime.jpg|thumb|upright|150px]]
*'''Battle Ready Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The mold is Redon again, this time in a battle-damaged look, while he retains the classic Optimus Prime colors. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionGreySkullOptimusPrime.jpg|thumb|upright|150px|By the power of Grayskull... '''''I HAVE THE POWER!''''']]
*'''Grey Skull Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. This vinyl takes the colors in a different way, which is mostly white with some dark grey areas. The colors to kinda look skeleton-ish. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDistressedOptimusPrime.jpg|thumb|upright|150px]]
*'''Distressed Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The colors take on an [[Optimus Prime (Movie)#''Age of Extinction'' film|Age of Extinction Optimus Prime]], in his flat-nose truck mode. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionFireOptimusPrime.jpg|thumb|upright|150px]]
*'''Fire Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in clear plastic. The colors seem to homage the Generation 1 [[Hot Rod (G1)|Rodimus Prime]].,This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDangerousOptimusPrime.jpg|thumb|upright|150px]]
*'''Dangerous Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, done in a camouflage style. This figure is a limited edition, and limited to only 600 pieces.

{{-}}
[[File:HikariLimitedEdition24KOptimusPrime.jpg|thumb|upright|150px]]
*'''24K Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in gold plastic. This figure is a limited edition, and only limited to 600 pieces.

{{-}}
==''Thrilling 30''==
*'''Optimus Prime''' (Collectible Figurine, 2014)
**''Series / Number:'' '''1 / #1'''
**''Accessories:'' Collector's base
:A super-deformed Optimus Prime was released among the blindpacked [[Thrilling 30#Collectible Figurines|''Thrilling 30'' Collectible Figurines]] by [[Goldie Marketing]]. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

*'''Collectible Figurines''' (5-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 5 Collector's bases
:The same Optimus Prime figurine was also available in a 5-pack alongside [[Megatron (G1)/merchandise#Thrilling 30|Megatron]], [[Ratchet (G1)/toys#Thrilling 30|Ratchet]], [[Starscream (G1)/merchandise#Thrilling 30|Starscream]] and [[Soundwave (G1)/merchandise#Thrilling 30|Soundwave]].

*'''Optimus Prime 3-pack''' (3-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 3 Collector's bases
:The same Optimus Prime figurine was ''also'' available in a 3-pack alongside [[Optimus Prime (WFC)/merchandise#Thrilling 30|''Prime'' Optimus Prime]] and [[Optimus Prime (Movie)/merchandise#Thrilling 30|Movie Optimus Prime]].
{{-}}

==Leg Avenue==
{{anchor|LegAvenue}}
[[File:Leg Avenue Optimus Prime.jpg|right|upright=.75|thumb|]]
:Costume and lingerie manufacturer Leg Avenue released an officially licenced Bumblebee costume along side ones for [[Bumblebee (G1)/merchandise#LegAvenue|Bumblebee]] and [[Megatron (G1)/merchandise#LegAvenue|Megatron]].

{{-}}

==''Tiny Titans''==
*'''Optimus Prime''' (Tiny Titans, 2015)
**''Series'': '''2'''
**''Number'': '''10/12'''

: Part of the third assortment of ''[[Tiny Titans]]'' [[blindpacking|blindpacks]], this version of Optimus Prime is a very small, soft-plastic figure of him in robot mode, brandishing both his rifle and his energy-axe weapon in a running battle pose.

: He includes a collectible card that renders him in the [[Transformers: Robots in Disguise (2015 franchise)|2015 ''Robots in Disguise'']] styling. The card includes a scan-badge for the [[Transformers: Robots in Disguise (mobile game)|''Robots in Disguise'' mobile game]], which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.

{{-}}{{anchor|TinyTitans2}}
[[File:TinyTitans OptimusG1S5.jpg|upright=1.67|thumb]]
*'''Optimus Prime''' (Tiny Titans, 2016)
**''Series'': '''5'''
**''Number'': '''11/12'''

: Part of the fifth assortment of ''Tiny Titans'', this version of Optimus is in a more neutral pose, this time only carrying his rifle.

: As per usual, he includes a collectible card that includes a scan-badge for the ''Robots in Disguise'' mobile game, which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.
{{-}}

==''D-Style''==
[[File:D-Style-OptimusPrime.jpg|thumb|upright=1.66|You got D-touch. You got D-power]]
*'''Convoy''' (2015)
**''ID number:'' '''43'''
**''Accessories:'' Two fists, pointing right hand, Ion blaster, energon-axe, Autobot Matrix of Leadership, Convoy cab with trailer

:An Optimus Prime was produced by [[Kotobukiya]] as part of ''[[D-Style]]'', their franchise-spanning line of super deformed model kits. His accessories include an ion blaster, an energon-axe, a Matrix that can store in his chest, and a tiny super deformed representation of his truck mode which can carry the ion blaster. Moving his antennae causes his mouthplate to move up and down.

:For a small figure it includes a large amount of articulation, including ankle tilts and top of legs tilting away from the yellow codpiece.

: The Convoy Trailer, ion blaster and the gold part of the Matrix all require painting. In addition, on promotional images ''all'' the black details and lines (for example on the front thighs and round the edge of the yellow codpiece) are painted and the eyes have been painted blue instead of left as clear plastic.

: Amusingly, the head has the [http://www.1999.co.jp/itbig29/10294593z.jpg mouth-less face] underneath Optimus' mouthplate, as a either a reference to the error from [[The Search for Alpha Trion]] or limitation in the model kit (or both).

:This mold was also used to make ''D-Style'' [[Nemesis Prime (G1)#D-Style|Black Convoy]].
{{-}}

==''ES Gōkin''==
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe, Matrix, left & right gripping hands, left & right open hands, left & right pointing hands, display stand

:Optimus Prime was also released as part of Art Storm's ''ES Gōkin'' series, a line of posable super deformed figures. He comes with his trademark gun which he can hold in either hand, an energon-axe that plugs into his wrist sockets, and a Matrix he can hold but not store in his chest.

::*''[http://artstorm.co.jp/esgokin_convoy.html More information on ''ES Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==''D-Collection''==
[[File:D-Collection Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe

:[[Kabaya]]'s ''D-Collection'' Optimus Prime is a small super deformed figure that requires some assembly and features articulation limited to his shoulders. He comes with his trademark blaster and axe accessories. Sold blindpacked, Prime is available as both a standard full color figure and a rare clear plastic version. He comes with chewing gum.
{{-}}

==''Metal Earth''==
[[File:Metal Earth Optimus Prime.jpg|thumb]]
*'''Optimus Prime''' (2015)
**''ID number:'' '''MMS300'''
:''[[Metal Earth]]'' Optimus Prime is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".
{{-}}
[[File:Metal Earth Legends Optimus Prime.jpg|thumb|[[Minecraft|Minecraft x Transformers]] before ''Minecraft x Transformers'' was a thing]]
*'''Optimus Prime''' (Legends, 2019)
**''ID number:'' '''MEM055'''
:''Metal Earth Legends'' Optimus Prime is a DIY 3D steel model kit in the shape of a super deformed version of the [[evergreen]] Optimus design. The kit's difficulty rating is given as "moderate".
{{-}}

==Hot Toys==
*'''Optimus Prime (Starscream Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Ion Blaster, two wings, two wing mounts, two null-rays, Matrix of Leadership, Base, Starscream's head (Sideshow Collectable's exclusive)

:Released by [[Hot Toys]] this high end collector figure stands approximately 30 cm tall. It features LED light up eyes and it's chest can open to reveal a LED light up, removable Matrix of Leadership. This version comes with a pair of wings and two [[null-ray]]s from Starscream that Optimus can attach. The Sideshow exclusive version of this comes with Starscream's severed head.

*'''Optimus Prime (Megatron Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Fusion cannon, Ion Blaster, gun with stock, set of wheels, two cannon mounting accessories, shoulder mount, Matrix of Leadership, Base

:This version of the figure has accessories themed from Megatron. These include Megatron's [[fusion cannon]], and a long rifle that passingly resembles Megatron's original gun mode. Both can be combined into a large two handed cannon.

{{-}}

==''Block Wars''==
*'''Optimus Prime''' (2016)
**''Number:'' '''1'''

:Part of [[Kabaya]]'s ''[[Transformers Block Wars]]'' candy toy line, this Optimus Prime kit is surprisingly, based on his [[Optimus Prime (G1)/toys#Cyber Series|Cyber Series Commander toy]]. Molded in red, blue, and yellow plastic with detailing from stickers, he transforms into a truck when finished and is armed with a two-pronged spear. He can also be taken apart and combined with ''Block Wars'' [[Bumblebee (G1)/toys#Block Wars|Bumblebee]], [[Megatron (G1)/merchandise#Block Wars|Megatron]] and [[Starscream (G1)/toys#Block Wars|Starscream]] in various configurations, the ones involving Prime shown on the packaging being:

:*Giving Prime Starscream's wings as a jetpack and arming him with Megatron's cannon.
:*Placing Megatron's turret on Prime's truck mode.
:*Giving Bumblebee Prime's spear, Megatron's arms and Starscream's wings.
:*Attaching Prime and Starscream's legs to Megatron's vehicle mode to create a walking tank.
:*Powering Starscream up by attaching Prime's spear to his back and giving him Bumblebee's weapons.
:*Combining all four into an unnamed combiner, with Optimus Prime forming the torso and upper legs.

==''Transformers Figure Collection''==
[[File:TF-Transformers-Figure-Collection-Optimus-Prime-Decoy.jpg|thumb]]
*'''Convoy''' (01-2016)

:Standing 42mm tall, ''Transformers Figure Collection'' Optimus Prime is a non-poseable soft-rubber figure greatly based on a [[Decoy (G1)|Decoy]] figure.

{{-}}

==''Hero of Steel''==
[[File:HeroofSteel Convoy.jpg|thumb|upright=1.11]]
*'''Convoy''' (2016)
**''Accessories:'' Ion blaster

:Produced by Alpha Max, ''Hero of Steel'' Convoy is a stylized, non-transforming figure standing at 9 inches/23 cm tall. He comes with his ion blaster.

{{-}}

==Bitfig==
[[File:Bitfig-Part-1.jpg|thumb|]]
*'''Convoy''' (12-2016)
Part of the first wave of Transformers Bitfig capsule toys by [[TakaraTomy A.R.T.S]],
Convoy's design is inspired by his appearance in the G1 cartoon, and is articulated at the neck and shoulders.
Bitfig toys were packaged in capsules color coded to the toy they contained.
{{-}}

==Prime 1 Studio==
===''Premium Masterline''===
[[File:TF-Premium-Masterline-PMTF-01-Optimus-Prime.jpg|upright=1.55|thumb|"Just in case you want to say "''I should've looked like this in the movies''", yes, I heard you."]]
*'''Optimus Prime''' (2017)
**''ID Number'': '''PMTF-01''' / '''01EX''' (exclusive)
**''Accessories'': Base, Fusion axe (exclusive), Energy axe (exclusive)

:One of the very first releases of the ''Premium Masterline'' series by [[Prime 1 Studio]], this Optimus Prime is a ''massive'' non-transforming statue based on his Generation 1 appearance with a blend of live-action film aesthetic, and features light-up LED eyes. The statue was also designed by [[Josh Nizzi]] himself. If customers had purchased the statue at [https://www.sideshowtoy.com/collectibles/transformers-optimus-prime-transformers-generation-1-prime-1-studio-9027641/ Sideshow's website], they would receive exclusive Energy and Fusion axes, which can be used to replace Prime's Ion Blaster-holding hand. The standard version was limited to 1500 pieces, while the exclusive version was limited to 750 pieces.

:This statue was later redecoed as [[Nemesis Prime (G1)#Prime 1 Studio|Nemesis Prime]] and [[Ultra Magnus (G1)/merchandise#Prime 1 Studio|Ultra Magnus]]. The statue's model also served as an inspiration to [[Optimus Prime (Movie)|Movie Optimus Prime]]'s appearance in the ''[[Bumblebee (film)|Bumblebee]]'' film.

{{-}}{{anchor|P1SGold}}
[[File:TF-Premium-Masterline-PMTF-01GL-Optimus-Prime-Gold-Edition.jpg|upright=1.55|thumb]]
*'''Optimus Prime Gold Version''' (2018)
**''ID Number'': '''PMTF-01GL'''
**''Accessories'': Base, Fusion axe

:Limited to 500 pieces, Optimus Prime Gold Version is a redeco of the statue above, evoking his Electrum-coated appearance in the Generation 1 episode "[[The Golden Lagoon (episode)|The Golden Lagoon]]". He also comes with a Fusion axe accessory that can replace his Ion Blaster hand.

{{-}}
===''Age of Time''===
[[File:Prime 1 Studio Superior Optimus Prime.jpg|upright=1.55|thumb]]
*'''Superior Optimus Prime''' (<s>201?</s>)

:''Age of Time'' Superior Optimus Prime was designed to be the "ultimate amalgamation" between G1 and movie Optimus Primes. He would have come with two blasters and a huge jetpack, specifically taking cues from Prime's combined form with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]''.

:For reasons unknown, this figure was silently canceled.
{{canceledtoy}}

{{-}}
===''Cutie1''===
[[File:Cutie1 Optimus Prime Figure.jpg|upright=1.11|thumb|''Transformers X Coraline'', directed by [[Travis Knight]].]]
*'''Optimus Prime''' (2022)
**''ID Number'': '''No:055'''
**''Accessories'': Stand

:A striking departure from previous Prime 1 Studio offerings, ''Cutie1'' Optimus Prime is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

:He was later redecoed as ''Cutie1'' [[Nemesis Prime (G1)#Cutie1|Nemesis Prime]].

{{anchor|Cutie1keychain}}
*'''Optimus Prime''' (Keychain, 2021)
**''Accessories'': Stand, chain

:Part of a marketing push following the announcement of the figure above, an acrylic keychain of ''Cutie1'' Prime was released, along with other products such as stickers, T-shirts, hand towels and totebags using the design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.

{{-}}{{anchor|P1SWFC}}

===''War for Cybertron Trilogy''===
[[File:Prime-1-Studio-WFC-Optimus-Prime.jpg|upright=1.66|thumb|"Why... have I... been... canceled?"]]
*'''Optimus Prime''' (<s>2022</s>)
**''ID Number'': '''PMTF-05''' / '''05UT''' (Ultimate Version)
**''Accessories'': Base (standard), base with Shockwave (Ultimate Version)

:A statue based on Optimus Prime's appearance in the ''[[Transformers: War for Cybertron Trilogy (cartoon)|War for Cybertron Trilogy]]'' cartoon. The exclusive version includes a defeated [[Shockwave (G1)/toys#Prime 1 Studio|Shockwave]] as part of the statue's base.

:This item was canceled due to the combination of rising production costs and insufficient preorders.
{{canceledtoy}}
{{-}}

==My Busy Books==
[[File:TF-My-Busy-Books-Transformers-Optimus-Prime-figurine.jpg|upright=1.66|thumb]]
*'''Transformers: My Busy Book''' (2017)

:Included with the [[Transformers: My Busy Book|10-page board book]], 12 figurines, and a playmat, Optimus Prime is represented by a pair of small, PVC non-transforming figurines of his robot and his semi-truck alternate mode, based on his [[evergreen]] design. Like most of the land-based vehicle figurines, his wheels do not roll.

:In terms of quality control, the figurines' paint applications can be... shoddy. If you're a collector who prefers to display them, you should resign yourself from buying it or try to [[customizing|customize]] the figures with better paint applications if you have the skills.
{{-}}

==Rubik's Crew==
[[File:Rubiks Crew Optimus.jpg|upright=1.66|thumb]]
*'''Rubik's Crew Game: Transformers Optimus Prime Edition'''<ref>[https://www.hasbro.com/en-us/product/rubik-s-crew-game-transformers-optimus-prime-edition:70976F4B-5056-9047-F52F-5BB6105031BB Rubik's Crew Game: Transformers Optimus Prime at hasbro.com]</ref> (2017)
This [[super deformed]] version of [[Optimus Prime (G1)|Optimus Prime]]'s robot mode has a detachable "Puzzlehead" that functions like the [https://www.rubiks.com/store/puzzles/rubiks-2x2 2x2] [[Rubik's Cube]].
{{-}}
{{-}}
==Fidget Its==
[[File:TF-Fidget-Its-Optimus-Prime.jpg|upright=1.66|thumb|Before time began, there was...the Cube.]]
*'''Optimus Prime''' (Fidget Its, 2017)

:''Fidget Its'' Optimus Prime is a non-transforming cube-shaped figurine, built for for your fidgeting needs! His pair of eyes & his forehead can be pushed like buttons, his right arm can swivel, his rear section can be fiddled like a combination lock dial, and his left arm can be moved up, down, up, and down.

{{-}}

==Hauck==
[[File:Hauck Go Kart Optimus.jpg|upright=1.66|thumb|Everyone wants to ride Optimus.]]
*'''Optimus Prime Go Kart''' (2017)
:Manufactured by [[Hauck toys]], the Optimus Prime go-kart is a small, pedal-operated vehicle for kids aged 4-8 years old. Cast in the image of Optimus (even featuring his head sculpted on the front), the kart features an adjustable seat as well as a brake.
{{-}}

==Colorcasa==
[[File:Gen-Colorcasa Optimus Prime Spoon Fork.jpg|upright=1|thumb|Eating is the right of... yeah you know the gist.]]
*'''3D Children Tableware''' (2017)
:Chinese company Colorcasa released a pair of children-sized cutlery in the form of a cute (though angry-looking) Optimus Prime, one as a spoon and another as a fork. They were branded as ''Generations'' products.
{{-}}

==Threezero==
===Premium===
*'''Optimus Prime - Classic Edition''' (Premium Scale, 2017)
**''Accessories:'' TBA
{{charstubtoys}}
{{-}}
===DLX===
*'''''War for Cybertron Trilogy'' Optimus Prime''' (DLX Scale, 2021)
**''Accessories:'' Ion Blaster, Energon Axe, Energon Shield, 5 pairs of hands, Action Stand
{{charstubtoys}}
{{-}}

===MDLX===
[[File:Threezero-MDLX-Optimus-Prime.jpg|thumb|upright]]
*'''Optimus Prime''' (2022)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)
:[[Threezero]]'s second figure for the MDLX line, this version of Optimus Prime is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Optimus Prime is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and accessories, namely his ion blaster, energon axe and Matrix of Leadership. He comes with a suite of hands in pairs: closed fists, splayed-out relaxed hands, and three different pairs meant to specifically hold each one of the aforementioned accessories. His chest is magnetically attached and as such can store the Matrix when not in use. Optimus also comes with his backpack piece disassembled in package.

:He was redecoed into [[Nemesis Prime (G1)#Threezero|Nemesis Prime]], [[Ultra Magnus (G1)/toys#Threezero|Ultra Magnus]], as well as his [[Optimus Prime (SG)#MDLX|''Shattered Glass'' self]].

:Optimus is [https://www.threezerohk.com/wp-content/uploads/2023/05/MDLX_Transformers_Starscream_17-768x512.jpg compatible] with [[Starscream (G1)/merchandise#Threezero|Starscream]] by way of the latter's wing assembly and head, in reference to "[[Megatron's Master Plan, Part 1]]".

::*''[https://www.threezerohk.com/product/transformers-mdlx-optimus-prime/ More information on MDLX Optimus Prime at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXNewYear}}
*'''Optimus Prime (Year of the Dragon Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:An all-gold {{W|Chinese New Year}} themed redeco of the above figure, featuring dragon patterns across his chest and left arm. According to the product description from Threezero, the right shoulder features the character for "Year of the Dragon" (龍), while his left shoulder features the fifth character (辰) of "Earthly Branches" in traditional Chinese sequencing (地支). Optimus features all the same accessories and functionality as before.

:This figure was limited to 1398 pieces worldwide, revealed in late 2023 and released in February 2024.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-year-of-the-dragon-edition/ More information on MDLX Optimus Prime (Year of the Dragon Edition) at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXVintage}}
*'''Optimus Prime (Vintage Animation Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:Yet another redeco of Prime, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

:Vintage Animation Edition Prime, [[Megatron (G1)/merchandise#MDLXVintage|Megatron]] and [[Bumblebee (G1)/merchandise#MDLXVintage|Bumblebee]] were revealed in a [https://newsroom.hasbro.com/news-releases/news-release-details/40-years-one-legacy-hasbro-celebrates-transformers-40th press release] from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-vintage-animation-edition/ More information on MDLX Optimus Prime (Vintage Animation Edition) at Threezero]
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXSleep}}
*'''Optimus Prime (Sleep Mode)''' (2025)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:A redeco of Prime in various shades of grey as a callback to his death in [[The Transformers: The Movie]]. All previous accessories and functionality carry over from before.

:This figure was revealed on Threezero's official website on February 2025.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-sleep-mode// More information on MDLX Optimus Prime (Sleep Mode) at Threezero]
{{MDLXOptimusPrimeMold}}

==Kidrobot==
[[File:Kidrobot GIJoe Enamel Pin Series.jpg|thumb|250px]]
===Enamel Pin Series===
*'''Optimus Prime''' ([[November 3]], [[2017]])
:*''Rarity:'' 1 in 20
:Released by [[Kidrobot]] in their Enamel Pin Series, this is a flat, enamel pin badge of Optimus Prime inspired by the art of [[Tom Scioli]]'s ''[[Transformers vs. G.I. Joe]]'', albeit with [[Super deformed|cutesy proportions]]. The pin series was [[Blindpacking|blindboxed]], with some pins being rarer than others.
{{--}}

===Vinyl Mini Series===
[[File:Kidrobot GI Joe Optimus Prime mini.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[November 14]], [[2017]])
:*''Rarity:'' 2 in 24
:*''Accessories'': Sword
:The same character design was reused for the Vinyl Mini Series, with Optimus receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. Optimus featured articulation in each shoulder, and also included his [[Minecraft]] voxel sword as first seen in "[[Everybody Hates Metroplex]]".
{{-}}

{{anchor|kidrobotgid}}
[[File:Kidrobot GI Joe Optimus Prime GID mini.jpg|thumb|upright=1]]
*'''Optimus Prime GID''' ([[November 14]], [[2017]])
:*''Rarity:'' 1 in 48
:*''Accessories'': Sword
:Optimus's Vinyl Mini figure was redecoed into "Optimus Prime GID", sharing many of the same paint applications, but now cast entirely out of glow in the dark plastic, more closely representing his apparition to [[Scarlett]] in "[[Headmasters (issue)|Headmasters]]" or his resurrection in "[[The War Never Ends]]". He was one of the rarer, but not the rarest, of the Vinyl Mini Series. His sword is still included.
{{-}}

===Vinyl Keychain Series===
[[File:Kidrobot GI Joe Optimus Prime keychain.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[December 1]], [[2017]])
:*''Rarity:'' 3 in 24
:Optimus was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation. His sword is also absent.
{{-}}

==Bouncing Ball Heads==
[[File:BouncingBallHead OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2017)
:"Bouncing Ball Head" Optimus Prime is a small, super deformed figurine with a removable head that doubles as a bouncy ball. An Autobot logo is tampographed on the back of his head and his name is written under his feet.

:He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique red color.

:Despite clearly representing Generation 1 characters, the collection is advertised as a 2015 ''[[Transformers: Robots in Disguise (2015 franchise)|Robots in Disguise]]'' product.
{{-}}

==Imaginarium Art==
[[File:ImaginariumOptimusPrime.jpg|upright=1.66|thumb|Brings new meaning to "no matter the cost."]]
*'''Optimus Prime''' (2017)

:[[Imaginarium Art]]'s first statue of Optimus Prime stands 24 inches tall and features multiple [[Light-emitting diode|LED]]s, two varieties of his laser rifle, and his energy axe. The statue's chestplate can open, revealing the Matrix of Leadership.

:The sculpted base for this figure also features the Combat Deck and Roller. Only 500 of this item were produced.
{{-}}

*'''Optimus Prime''' (2018)

:The "Legacy of Cybertron" statue is 12 inches tall, and its base can be connected to other statues in that series to produce a larger battle scene. 600 were produced.
{{-}}

==''Keshi Surprise''==
*'''Autobots''' (2018)

:The ''[[Keshi Surprise]]'' series by [[Super7]] consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980s [[Decoy (G1)|Decoy]]s. These [[blindpacking|blind-packed]] figures were sold individually or in cases depicting only their faction. Optimus Prime was available in red, yellow, blue, and purple, and included a foil trading card / sticker.
{{-}}
==Forever Clever==
{{anchor|Jumbochalk}}
*'''4 Pack Jumbo Chalk Set''' (2018)
:Released by [[Forever Clever]], the 4 Pack Jumbo Chalk Set includes a chalk holder featuring Optimus Prime. He's bundled with chalk holders of [[Megatron (G1)/merchandise#Jumbochalk|Megatron]], [[Bumblebee (G1)/merchandise#Jumbochalk|Bumblebee]] and [[Soundwave (G1)/merchandise#Jumbochalk|Soundwave]], and 4 pieces of appropriately colored chalk.
{{anchor|shapechalk}}
*'''5 Pack Shaped Chalk''' (2019)
:A piece of blue chalk formed into the shape of Optimus Prime. Bundled with [[Megatron (G1)/merchandise#shapechalk|Megatron]], [[Bumblebee (G1)/merchandise#shapechalk|Bumblebee]], [[Starscream (G1)/merchandise#shapechalk|Starscream]] and [[Windblade (G1)#shapechalk|Windblade]].
{{anchor|WallWalker}}
*'''Wall Walkers Optimus Prime''' (2018)
:Exclusively released in [[Blindpacking|blind bags]], ''Wall Walkers'' Optimus Prime has suction cups on its hands and feet so it can stick to walls. All its details are printed on, and besides its colors and printing, it is identical to the other Wall Walkers toys.
{{anchor|MiniWalker}}
[[File:MysteryMiniWalkers.jpg|upright=1|thumb]]
*'''Mystery Mini Walkers Optimus Prime''' (2021)
:Also a blind bag exclusive, ''Mystery Mini Walkers'' Optimus Prime is an eraser-like figure with movable arms and legs and printed-on details.
{{-}}
{{anchor|PBRoptimus}}
[[File:TF Authentics 2023 Pull-Back Racers Optimus Prime.jpg|upright=1|thumb|Up top!]]
*'''Pull-Back Racers Optimus Prime''' ([[2023]])
:This toy is a non-transforming rendition of Optimus Prime in a super-deformed rendition of his vehicle mode, albeit with his robot mode head and left arm sticking out of it. As the title suggests, this toy has a pull-back motor that will propel the toy forwards after being pulled back considerably enough.
{{-}}
{{anchor|ClipCharms}}
[[File:ForeverCleverClipCharms.jpg|upright=1|thumb]]
*'''Clip Charms Optimus Prime''' (2024)
:Released in blind bags, ''Clip Charms'' features a keychain of Optimus Prime's face with his name written beside it.
{{-}}
{{anchor|KeyBlasters}}
*'''Key Blasters''' (2024)
:A toy car released as part of the ''Key Blasters'' series prominently features Optimus Prime on its side and hood, with his name written on top in [[Alphabet#Autobot_script|Ancient Autobot]] script. A key is included. When it is inserted into the car, pushing the button on the key will propel the car forward. It was sold in a two-pack with a [[Starscream (G1)/merchandise#KeyBlasters|Starscream]] themed car.

===Squeezelings===
*'''Optimus Prime''' (Series 1, 2022)
:''[[Squeezelings]]'' Optimus Prime is a [[super deformed]], non-posable figure made of soft plastic and holding his ion blaster, released by [[Forever Clever]]. He was released in [[blindpacking|blind bags]] and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

{{-}}{{anchor|SqueezelingsBlackout}}
*'''Blackout Color Mode Optimus Prime''' (2022)
:A [[black redeco]] of the previous Optimus Prime figure. It was exclusive to an 8-figure gift set, featuring [[Optimus Prime (G1)/merchandise#Squeezelings|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings|Bumblebee]], [[Starscream (G1)/merchandise#Squeezelings|Starscream]], [[Megatron (G1)/merchandise#Squeezelings|Megatron]], and Blackout Color Mode versions of the three other characters.

{{-}}{{anchor|Squeezelings2}}
*'''Optimus Prime''' (Series 2, 2023)

:A figure of Optimus Prime in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongside [[Bumblebee (G1)/merchandise#Squeezelings2|Bumblebee]], [[Megatron (G1)/merchandise#Squeezelings2|Megatron]] and [[Optimus Primal (BW)/toys#Squeezelings|Optimus Primal]], in blind bags, or on blister card individually. It was later rereleased as part of the Squeezelings Sidekicks line, bundled with a comic book.

==''Transformers Trading Card Game''==
[[File:W1SOptimusPrimeAL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Autobot Leader''' (2018)
**'''Wave 1S: Starter Set'''
**''Rarity: '''''RT'''
**''Card Number: '''''T03/T04'''
**''Stars: ''7
:Optimus Prime, Autobot Leader is one of four double-sided character cards available in the ''[[Transformers Trading Card Game]]'' Starter Set.

:The artwork for the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile card game.
{{-}}
[[File:W1OptimusPrimeBL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2018)
**'''Wave 1'''
**''Rarity: '''''RT'''
**''Card Number: '''''T29/T40'''
**''Stars: ''13
:Optimus Prime, Battlefield Legend is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The card's Bot Mode line-art was done by [[Guido Guidi]], and Alt Mode line-art by [[Marcelo Matere]] and Alt Mode colors by [[Sara Pitre-Durocher]].

{{-}}
[[File:W1OptimusPrimeFF.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Freedom Fighter''' (2018)
**'''Wave 1'''
**''Rarity: '''''CT'''
**''Card Number: '''''T30/T40'''
**''Stars: ''12
:Optimus Prime, Freedom Fighter is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The Alt Mode artwork on the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile game, while the Bot-mode features line-art by [[Marcelo Matere]] and colors by [[Sara Pitre-Durocher]].
{{-}}
[[File:W2OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Gleaming Commander''' (2019)
**'''Wave 2: Rise of the Combiners'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''11

:Optimus Prime, Gleaming Commander was released as part of the ''[[Transformers Trading Card Game]]'' Wave 2: Rise of the Combiners. Like all other members of [[combiner]] teams released in the set, This version of Optimus Prime is a folding card, with the Bot and Alt modes being depicted when the card is folded in half, and a holofoil portion of the the combined mode depicted when unfolded. The reverse of Optimus Prime, Gleaming Commander depicts the center right portion of [[Optimus Maximus (G1)|Optimus Maximus']], of whom Optimus Prime forms the torso and head.

:The artwork for Bot Mode is reused from the [[Combiner Wars (franchise)|Combiner Wars]] Battle Core Optimus Prime toy's packaging art.

:Optimus Prime, Gleaming Commander can be used to form Optimus Maximus, Ultimate Defender with the use of the Action card [[Enigma of Combination|Sentinel Enigma]] while he and the other Wave 2 Sentinels are in Bot mode on the battlefield and/or KO area.
{{-}}
[[File:W3GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Infantry-Leader''' (2019)
**'''Wave 3: War for Cybertron: Siege I'''
**''Rarity: '''''RT'''
**''Card Number: '''''T07/T48'''
**''Stars: ''11
:General Optimus Prime, Infantry-Leader is one of forty-eight double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege I.

:The card's artwork is based on the ''[[War for Cybertron: Siege|Siege]]'' Voyager-class Optimus Prime toy, with the Bot Mode artwork being reused from the toy's packaging art.
{{-}}
[[File:W4GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Galactic Commander''' (2019)
**'''Wave 4: War for Cybertron: Siege II'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T06/T52'''
**''Stars: ''15

:General Optimus Prime, Galactic Commander is one of fifty-two double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege II.

:The card's artwork is based on the ''Siege'' Leader-class Galaxy Upgrade Optimus Prime toy, which in turn is based on the ''[[Transformers: Cybertron (franchise)|Cybertron]]'' version of Optimus Prime. The Bot Mode artwork is reused from said toy's packaging art, while Alt Mode received new art (lines by [[Marcelo Matere]] and colors by [[Volta]]).
{{-}}
[[File:EEOptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2019)
**'''Wave 1: Energon Edition'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T205/T06'''
**''Stars: ''13

:Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Optimus Prime, Battlefield Legend. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art by [[Marcelo Matere]]
{{-}}
[[File:W5OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Legendary Warrior''' (2020)
**'''Wave 5: Titan Masters Attack'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''12

:Optimus Prime, Legendary Warrior is one of forty-six double sided character cards released as part of Wave 5 of the ''[[Transformers Trading Card Game]]'', Titans Masters Attack. As a character with a body mode, Optimus Prime begins the game with a Titan Master attached in head mode. Once Optimus Prime is KO'd, said Titan Master is deployed.

:The card's artwork is based on the ''Titans Return'' Leader-class Powermaster Optimus Prime toy, with the body mode artwork being reused from the toy's packaging art.

:This card's set was originally set for an April 2020 release, however due to the global COVID-19 pandemic the release was pushed back to May 29, 2020.
{{-}}

==''Magic: The Gathering''==
[[File:MTG-Optimus-Inspiring-Leader.jpg|thumb|upright=1.66|Go ahead, turn me to my other face, see the rules nightmare that happens.]]
*'''Optimus Prime, Inspiring Leader''' (2018)
**''ID number:'' '''002/004'''
**''Set code:'' '''H18'''
**''Color identity:'' '''Red/White'''
**''Casting cost:'' '''{3}{R}{W}'''
**''Artist:'' [[Steve Argyle]]
:Part of the ''[[mtg:Heroes of the Realm|Heroes of the Realm]]'' series of commemorative cards, made by Wizards of the Coast for their employees as rewards for work on specific projects,<ref>[https://www.youtube.com/watch?v=4WNBRWoHq9E Gavin Verhey from Wizards of the Coast explains Heroes of the Realm]</ref> the 2018 "Optimus Prime, Inspiring Leader" card was given to the team behind the ''[[Transformers Trading Card Game]]''. Uniquely, Optimus Prime is "triple-faced" card: a ''Magic'' card on the front side, a ''Transformers Trading Card Game'' card representing Optimus in his alternate mode on the opposite side, and an oversized ''Transformers Trading Card Game'' card representing Optimus in robot mode found by unfolding the card.
:Optimus has the ability to change any permanent (card on the battlefield) to its other face, though sadly that doesn't mean he could convert ''himself'' into a ''Transformers Trading Card Game'' card during a ''Magic: The Gathering'' game.<ref>[https://www.reddit.com/r/magicTCG/comments/e5ovx5/heroes_of_the_realm_promo_optimus_prime_inspiring/ Post by u/Wizards_Drew] on [https://www.reddit.com/r/magicTCG/ r/magicTCG] on Reddit</ref>
:As with all ''Heroes of the Realm'' cards, "Optimus Prime, Inspiring Leader" is not legal to play in any format beyond a specific Commander rule; the cards are novelties designed to be read, rather than played.<ref>[https://markrosewater.tumblr.com/post/189543247703/hi-mark-i-have-2-questions-1-what-are-the Mark Rosewater on Tumblr]: "There’s no plans to release the Heroes of the Realm. The cards aren’t designed to be played. They’re designed to be read."</ref>
{{-}}
{{anchor|MTGHero}}
[[File:MTG-Optimus-Prime.jpg|thumb|upright=1.66|Transform and tap out!]]
*'''Optimus Prime, Hero / Optimus Prime, Autobot Leader''' (2022)
**''ID number:'' '''013/015'''
**''Set code:'' '''BOT'''
**''Color identity:'' '''Blue/Red/White'''
**''Casting cost:'' '''{3}{U}{R}{W}''' (front), '''{2}{R}{W}{B}''' (back with "More Than Meets the Eye")

:"Optimus Prime, Hero" is part of the 2022 ''[[Magic: The Gathering]]'' ''[[mtg:Universes Beyond|Universes Beyond]]'' ''[[mtg:Transformers|Transformers]]'' card set, found in Set Booster and Collector Booster packs of ''Magic''<nowiki>'s</nowiki> ''[[mtg:The Brothers' War|The Brothers' War]]'' set. It can be reversed to become "Optimus Prime, Autobot Leader", representing Optimus in vehicle mode. True to his character, he supports his allies with the "Bolster" mechanic and can return to the battlefield should he [[The many deaths of Optimus Prime|die]] in his Artifact Creature form.
:A variant of this card was available solely in Collector Booster packs, depicting [[Optimus Prime (SG)#Magic: The Gathering|''Shattered Glass'' Optimus Prime]].
{{-}}
{{anchor|MTGSLD}}
[[File:MTG-SLD-Optimus.jpg|thumb|upright=1.66|[[w:Golem|On sale just in time for Hanukkah]].]]
*'''Optimus Prime''' ''(Darksteel Colossus)'' (2022)
**''ID number:'' '''1081'''
**''Set code:'' '''SLD'''
**''Color identity:'' '''Colorless'''
**''Casting cost:'' '''{11}'''

:"Optimus Prime" is part of the ''[[Magic: The Gathering]]'' card pack ''Transformers: Optimus Prime vs. Megatron'', part of the ''[[mtg:Secret Lair|Secret Lair Drop Series]]'' ''[[mtg:Secret Lair Drop Series: December Superdrop 2022|December Superdrop 2022]]'' set. It was available exclusively from [https://secretlair.wizards.com secretlair.wizards.com] from [[December 5]], [[2022]] through [[January 6]], [[2023]].
:Optimus Prime is a [[mtg:Skinned card|reskin]] of the existing ''Magic'' card [https://scryfall.com/card/dst/109/darksteel-colossus Darksteel Colossus], using the same rules and counting as it for all gameplay purposes. Befitting the mighty leader of the Autobots, Optimus is incredibly powerful and impossible to destroy normally, but consequently has a very high casting cost. While the card has printing on both faces, depicting Optimus in robot mode and vehicle mode respectively, both have the same printed abilities and count as a single card for rules purposes—just choose which side you want to display when he enters the battlefield.
: The ''Optimus Prime vs. Megatron'' set also includes [[Megatron (G1)/merchandise#MTGSLD|Megatron]], [[AllSpark#Magic: The Gathering|The AllSpark]], and the bonus card [[Cybertron (planet)|Cybertron]].

{{--}}

==Flame Toys==

===Kuro Kara Kuri===
[[File:FlameToys-KuroKaraKuri-04-OptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (December 2019)
**''Number:'' '''04'''
**''Accessories:'' Large sword, stone, Swords (2), Large axe, Small axe (2), Ion cannon, pairs of hands (5), additional faces (2), Big Turbo Jet Axe with set of hands (exclusive),
**''Sculptor'': Chemical Attack
**''Painting'': Decomas Lab (Hiroyuki Hirose]

:Part of [[Flame Toys]]' ''Kuro Kara Kuri'' line of high-end, non-transforming action figures, Optimus Prime is an original design, though one that bears many similarities to the Don Figueroa design from [[IDW Publishing|IDW's]] ''The Transformers'' vol. 1. He has lots of die cast and LEDs in his head, chest matrix chamber, and both knees. He comes with a multitude of accessories, including a very large sword that can be plugged into a stone, two smaller swords resembling handheld versions of those used by the [[Optimus Prime (Movie)|live-action movie Optimus Prime]], a pair of hatchets resembling those of [[Optimus Prime (Animated)|''Animated'' Optimus Prime]], and of course G1 Optimus Prime's iconic Ion cannon. He also comes with an Orion Pax visorless alternative face, a battle damaged addition face, and five alternative pairs of hands in different poses.
:If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a very large Turbo Jet Axe.
:The reissue (which is labelled as such on the box) uses a slightly different red paint and is the recommended release for use with the Jet Power Armor (see below) due to the paint's extra durability.

{{-}}{{anchor|FlameToysBlackJetPower}}
[[File:FlameToys-KuroKaraKuri-OptimusPrimeJetPowerArmor.jpg|upright=1.66|thumb|And you thought the previous figure was expensive...]]

*'''Optimus Prime Jet Power Armor''' (January [[2024]])
**''Number:'' '''13'''
**''Accessories:'' ''everything...'', Blaster Cannon (exclusive)
**''Sculptor'': Chemical Attack
**''Coloring'': Masashi Watanabe

:Optimus Prime Jet Power Armor is a collection of 23 armour pieces that combine with the previously released ''Kuro Kara Kuri'' Optimus Prime similar to how he combined with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]'' which doubles the size of the figure. If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a blaster cannon.
:As mentioned above, due to addition paint durability, it is recommended to use the re-release of Optimus Prime.

{{-}}

===Furai Model===
[[File:FlameToys-FuraiModel-01-OptimusPrimeAttackMode.jpg|upright=1.66|thumb|'''''X-treme!''''']]
*'''Optimus Prime (Attack Mode)''' (September 2018)
**''Number:'' '''01'''
**''Accessories:'' Ion cannon, axe, 4 hands
{{toydesigner|[[Akira Amemiya]] (concept artist)}}

:Released as part of the ''Furai Model'' line by [[Flame Toys]], "Optimus Prime (Attack Mode)" is an articulated, non-transforming, Voyager Class-sized {{w|Gunpla}}-style model kit. Using parts made of hard ABS plastic and some polycaps, Optimus Prime (Attack Mode) is an original design created by Flame Toys in collaboration with [[Akira Amemiya]] of [[Studio Trigger]].

:For straight-assembly builders, Optimus Prime features a sheet of foil stickers for detail (notably the shoulder insignias), though the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers like ''Gundam Markers'' can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.

:This model kit was later [[redeco]]ed as [[Nemesis Prime (G1)#Flame Toys|Nemesis Prime (Attack Mode)]] and [[Optimus Prime (SG)#Flame Toys|Shattered Glass Optimus Prime (Attack Mode)]].

{{-}}{{anchor|Furai03}}
[[File:FlameToys-FuraiModel-03-OptimusPrimeIDW.jpg|upright=1.66|thumb]]
*'''Optimus Prime (IDW ver.)''' (March 2019)
**''Number:'' '''03'''
**''Accessories:'' Ion cannon, 4 hands
:Optimus Prime (IDW) is a plastic model kit based off of the Optimus Prime design created by [[Don Figueroa]] for [[IDW Publishing]]'s [[The Transformers (IDW)|2009-2011 ''The Transformers'' comic series]]. Similarly to the previous model kit, IDW Optimus is also Voyager-sized.
:This model kit was later redecoed as [[Nemesis Prime (G1)#Furai08|Nemesis Prime (IDW ver.)]] and [[Ultra Magnus (G1)/merchandise#Flame Toys|Ultra Magnus (IDW ver.)]], and it's also used to make the pre-built Furai Action figure (see below.)

{{-}}{{anchor|Furai12}}
[[File:FuraiG1Optimus.jpg|upright=1.66|thumb]]
*'''Optimus Prime (G1 ver.)''' (April 2020)
**''Number:'' '''12'''
**''Accessories:'' Ion cannon, 10 hands, axe
:Optimus Prime (G1) is another plastic model kit, this time a heavily stylized rendition of his cartoon appearance. Like the previous releases, he stands at an approximate Voyager height. He features opening chest windows which reveal sculpted detail of the [[Matrix of Leadership]].

{{-}}{{anchor|Furai16}}
*'''Optimus Prime IDW (Clear ver.)''' (August 2020)
**''Number:'' '''16'''
{{toystub}}

{{-}}
*'''Optimus Prime''' (20??)
:Part of the ''"Deformer Model Kit"'' subline of the ''Furai Model'' line, this Optimus Prime model is a cutesy, "[[super deformed]]" take on the Autobot leader.
{{comingsoontoy}}

===Furai Action===
[[File:FlameToys-FuraiAction-OptimusPrimeIDW.jpg|thumb|Just like one of those second-hand pre-built Gunplas you've seen in Akibahara!]]
*'''Optimus Prime (IDW ver.)''' (January 2020)
**''Accessories'': Ion cannon, 4 hands

:''Furai Action'' Optimus Prime is a pre-assembled redeco of the second ''Furai Model'' kit, with the weathering effects painted on.

{{-}}

==''Playskool Friends''==
[[File:Playskool-Friends-TF-Optimus-Prime.jpg|upright=1.88|thumb|A mouth on his mouthplate? That's a new one.]]
*'''Transformers Collector Pack''' (Canceled)

:Intended to be released as part of the 7-pack for the Playskool Friends lineup, this Optimus Prime is a very adorable non-transforming figurine. He was to come packed with Bumblebee, Arcee, and 4 Rescue Bots: Heatwave, Chase, Boulder and Blades.

:Given the inclusion of the four Rescue Bots, it was ''probably'' unclear if this Optimus Prime is meant to represent his ''Generation 1'' counterpart or his ''[[Optimus Prime (WFC)|Aligned]]'' counterpart.

{{canceledtoy}}

{{-}}

==''Uglydolls''==
[[File:Uglydolls plush collab.jpg|250px|thumb]]
*'''Ox as Optimus Prime''' (2018)
:A collaboration with ''[[Uglydolls]]'' for the 2018 San Diego Comic-Con, the character Ox is dressed as Optimus Prime. He is a limited run exclusive plush, along with Ice-Bat as [[Bumblebee (G1)/merchandise|Bumblebee]].
{{--}}

==McDonald's==
[[File:2018-McD-Authentics-Bumblebee-Optimus-Prime.jpg|250px|thumb]]
*'''Optimus Prime with a sword'''{{sic}} (Happy Meal Toy, 2018)
:Released as part of the [[McDonald's]] June 2018 Happy Meal Toys along with [[My Little Pony]], this Optimus Prime is a super-deformed figurine, and he features a gimmick on his left arm, which can be swung down to reveal a pop-out sword with the press of a button on his back. The sword can be retracted manually by raising the arm.

:The toy was available in South Korea, Italy, Russia, and Malaysia. This toy was rereleased in the US as [[Optimus Prime (Movie)/merchandise#McDonald's 2|Optimus Prime]] for the ''[[Bumblebee (franchise)|Bumblebee]]'' promotion. In Malaysia, this toy is one of the few items that can be found in several hobby toy shops.

{{-}}

==Jada Toys==
===''Metals Die Cast / Hollywood Rides''===
[[File:JadaHollywoodRidesG1OptimusPrime1-24.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2018)
:Released by [[Jada Toys]], this 1/24 scaled non-transforming die-cast truck with rubber tires is based on Optimus Prime's original form and features opening doors to reveal a highly detailed interior with a chromed steering wheel. Similar to the ''[[Robot Powered Machines#Mini-Vehicles|Robot Powered Machines]]'', the truck features a sculpted robot mode underneath. His smokestacks are ''insanely'' long.

:This mold was later redecoed as [[Nemesis Prime (G1)#Jada Toys|Nemesis Prime]].

{{-}}{{anchor|Jada1-32}}
[[File:JadaHollywoodRidesG1OptimusPrime1-32.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2018)
:A medium-sized replica of Optimus Prime much similar to the version above, but with shortened smokestacks. Unlike most other 1/32 vehicles, Optimus does not feature any opening doors, but still retains the sculpted robot mode on his chassis.

{{-}}{{anchor|JadaOP3pack}}
[[File:Jada 1-32 Optimus Prime 3pk.jpg|upright=1.44|thumb]]
*'''Western Star 5700XE Optimus Prime / Optimus Prime / Autobot Optimus Prime''' (Scale 1/32 Die Cast Vehicle 3‑pack, 2022)
:The 1/32 version of Generation 1 Optimus Prime was rereleased in a 3-pack alongside his [[Optimus Prime (Movie)/merchandise#JadaOP3pack|2007 and ''The Last Knight'']] counterparts, neither featuring any notable changes.

{{-}}{{anchor|JadaGhost124}}
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2024)
:A redeco of the 1/24 scaled replica above, this Optimus Prime was released in a crossover with the ''[[Ghostbusters]]'' franchise and is mostly based on the [[Optimus Prime (G1)/Generations toys#Collaborative|MP-10G Optimus Prime Ecto-35 Edition]] figure from the ''[[Transformers Collaborative|Collaborative]]'' toyline, itself based on the original [[Ecto-1]] color scheme, with the addition of some green ghost splatter between the front bumper and the left wheel. Instead of Autobot insignias, this version features the Ghostbusters logo on both sides and the back of the cab, as well as under the chassis right above his robot mode sculpture.

{{-}}{{anchor|JadaGhost132}}
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2024)
:This version of Optimus Prime is a redeco of the 1/32 scaled replica in the same Ghostbusters-inspired deco of the 1/24 version above. The only noticeable difference in colors is the lack of green on its headlights.

===''Metalfigs''===
[[File:JadaMetalfigsG1OptimusPrime.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (4" Die Cast Figure, 2020)
**''Accessories'': Ion blaster, Energon-axe
:''Metalfigs'' Optimus Prime is a 4-inch tall non-transforming super deformed die-cast figure with three points of articulation and light-up eyes.

:He comes with his signature ion blaster and Energon-axe weapons as accessories.

{{-}}{{anchor|DioramaScene}}
[[File:JadaMetalfigsG1DioramaScene.jpg|upright=1.44|thumb]]
*'''Diorama Scene''' (2 3/4" Die Cast Figure 4-pack, 2020)
**''Accessories'': Display backdrop
:A static die-cast figurine of Optimus Prime measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongside [[Bumblebee (G1)/merchandise#DioramaScene|Bumblebee]], [[Starscream (G1)/merchandise#Jada Toys|Starscream]] and [[Megatron (G1)/merchandise#Jada Toys|Megatron]].

:The packaging backdrop can be used as an additional display piece for the set.

{{-}}{{anchor|Metalfigs4pack}}
*'''Optimus Prime / Bumblebee / Optimus Primal / Megatron''' (2 3/4" Die Cast Figure 4-pack, 2022)
:This static Optimus Prime figurine is directly designed after the 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongside [[Bumblebee (G1)/merchandise#Metalfigs4pack|Bumblebee]], [[Optimus Primal (BW)/toys#Metalfigs|Optimus Primal]] and [[Megatron (G1)/merchandise#Metalfigs4pack|Megatron]].

{{-}}{{anchor|Metalfigssingle}}
*'''Optimus Prime''' (2 3/4" Die Cast Figure, 2023)
:The same super deformed Optimus Prime from the 4-pack above is also available in individual packaging.
{{-}}

===''Nano Hollywood Rides''===
[[File:JadaNanoHollywoodRidesG13pack.jpg|upright=1.44|thumb]]
*'''Starscream / Volkswagen Beetle Bumblebee / Optimus Prime''' (1.65" Die Cast Vehicle 3-pack, 2020)
:''Nano Hollywood Rides'' Optimus Prime is a small non-transforming die-cast truck measuring approximately 1.65 inches long. He was released in a 3-pack alongside [[Starscream (G1)/merchandise#Nano Hollywood Rides|Starscream]] and [[Bumblebee (G1)/merchandise#Nano Hollywood Rides|Bumblebee]]. Unfortunately, he doesn't feature a sculpted robot mode underneath like most other Jada vehicles do.
{{-}}

===''Nano Metalfigs''===
[[File:JadaNanoMetalfigsG1-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 1 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:''Nano Metalfigs'' Series 1 Optimus Prime is an incredibly small die-cast figurine molded holding his blaster. He has a little base attached to his feet for balancing reasons.

:He comes in an impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]]. This mold was later redecoed as [[Nemesis Prime (G1)#Nano Metalfigs|Nemesis Prime]] in the Series 2 18-pack.

{{-}}{{anchor|NanoMetalfigs2}}
[[File:JadaNanoMetalfigsSeries2G1BW-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 2 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:A second ''Nano Metalfigs'' Optimus Prime was released in Series 2, now wielding his Energon axe instead of his blaster and doing a bit more of an action pose.

:He comes in ''another'' impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{-}}{{anchor|NanoMetalfigs3}}
*'''Transformers Series 3 18-pack''' (4 cm Die Cast Figure Multipack, 2023)
:For the [[Jada Toys#Nano Metalfigs|third ''Nano Metalfigs'' multipack]], two Optimus Primes were made available at once. One is a re-release of the axe-wielding Series 2 figurine with no noticeable changes, and the other is a golden redeco of the blaster-holding Series 1 figurine.
{{-}}

===Converting RC Vehicle===
[[File:JadaConvertingOptimusPrime.jpg|upright=1.44|thumb|"We have [[Optimus Prime (G1)/toys#Robosen Collector's Edition|Robosen's Optimus Prime]] at home."]]
*'''Optimus Prime Converting R/C''' (2022)
**''Accessories:'' Remote controller
:This Optimus Prime is a remote controlled figure capable of automatically converting between robot mode and truck mode on command.

:He measures approximately 13 inches tall in robot mode and 12 inches long in truck mode, and features lights, sounds and voices.

{{--}}

==''ReAction''==
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2020, 2024)}}</ul>
:*''Accessories'': Ion Blaster

: Released in [[Super7]]'s line of multi-property 3.75-inch action figures, ''[[Super7#ReAction|ReAction]]'' Optimus Prime was naturally part of the first wave of ''Transformers'' figures. It is a non-converting action figure with 5 points of articulation (simple swivel shoulders, legs, and neck) and an [[Ion blaster]] accessory he can only hold in his right hand.

: It should be noted that despite being a "retro-styled" figure, the hard-plastic points on his helmet are very accurate to the animation model and therefore ''incredibly'' pointy, like, "would not be allowed on a toy for the 5-13 set" pointy.

: As with all releases in the ''ReAction'' toyline, Optimus comes packaged in a small cardback that emulates the nostalgic packaging style of [[Kenner]] ''[[Star Wars (franchise)|Star Wars]]'' action figures of the late 1970s to early '80s.

: In late 2024, this figure was reissued with no obvious changes, now in a [[blindpacking|blindpacked]] box assortment.

{{-}}{{anchor|ReActionCyberchrome}}
<ul class="iconlist">{{Bp-a1|'''Cyberchrome Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: This version of the Optimus ''ReAction'' figure features glossy metallic paint. That's about it. Whee.

: This figure was a [[Target]] exclusive in the US, released alongside the "[[Megatron (G1)/merchandise#ReActionCyberchrome|Cyberchrome Megatron]]" figure.

{{-}}{{anchor|ReActionFallenWave4}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: Released in the fourth wave of ''ReAction'', this all-gray version of Optimus features a new torso tooling with open chest panels revealing a (non-removable) Matrix of Leadership.

: This is the first of ''three'' different figures of the same concept to be sold under the name "Fallen Leader Optimus Prime"; the other two (below) are [[Target]] exclusives.

: This figure was initially solicited to retailers as "Dead Optimus Prime" before the slightly gentler name change... but "Dead Optimus Prime" is still what the figure is labeled on the cardback checklist as of wave 6.

{{-}}{{anchor|ReActionSanta}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Christmas]]-themed redeco, "Optimus Santa" features a red and green color scheme, a tufted Santa cap, and his ion blaster is striped to resemble a candy cane.

: This figure is a "shared exclusive" between, multiple online outlets. The card still refers to him as just "Optimus Prime" (albeit in cursive on a gift tag), but the toy is listed as "Optimus Santa" on Super7's website, and "Optimus Prime Santa" on other sites.

{{-}}{{anchor|ReActionFallenTarget}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: This Target-exclusive version of the "Fallen Leader" concept is just the normal Optimus figure with the closed-up chest done in the grays of the initial "Fallen Leader" figure. Exciting! And clearance fodder!

: This figure was released alongside the "[[Megatron (G1)/merchandise#ReActionChromeCommander|Chrome Commander Megatron]]" figure.

{{-}}{{anchor|ReActionGolden}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The third [[Target]]-exclusive Optimus Prime figure, this one has a head-to-toe gold redeco, depicting his appearance in the end of "[[The Golden Lagoon (episode)|The Golden Lagoon]]".

: This figure was released alongside the similarly-decoed [[Megatron (G1)/merchandise#ReActionGolden|"Golden Lagoon" Megatron]] figure.

{{-}}{{anchor|ReActionFallenTargetColor}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The second Target-exclusive "Fallen Leader" version of Optimus, and the third "Fallen Leader" overall (kinda morbid, y'all), and ''fourth'' Target-exclusive Optimus (overkill much?), this is the open-chest version of Optimus in his normal "living" color scheme, now better depicting the Matrix transfer moment when Prime was still (barely) alive.

: This figure was released alongside the thematically-similar [[Megatron (G1)/merchandise#ReActionFallenEvolution|"Fallen Evolution" Megatron]] figure.

{{-}}{{anchor|ReActionOpHalloween}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Halloween]]-themed redeco of the standard Optimus figure, in orange and black. Pumpkinmus Prime.

: This figure was a "shared exclusive", sold through multiple online retailers. Online listings call it "Optimus Prime (Halloween)", but the actual card simply says "Optimus Prime".

<ul class="iconlist">{{Bp-a1|'''Nucleon Quest Optimus Prime''' (2024)}}</ul>
:*''Accessories'': Ion blaster

: Wave eight of ''ReAction'' saw this black redeco of Optimus Prime, inspired by the 2001 [[Optimus Prime (G1)/toys#NucleonQuest|Nucleon Quest Super Convoy]] figure.

{{-}}

*'''Ark Base''' (Playset, 2024)

:*''Accessories'': Ion blaster

: The ''ReAction'' Ark Base playset included a version of Optimus Prime with his chest windows painted to add simulated reflective detail.
{{comingsoontoy}}
{{-}}

==''R.E.D. [Robot Enhanced Design]''==
[[File:TF-R.E.D.-Optimus-Prime.jpg|upright=1.66|thumb|Armored Convoy not included.]]
*'''Optimus Prime''' (2020)
**''Accessories'': Ion Blaster, Energon Axe, [[Matrix of Leadership/toys#R.E.D. .5BRobot Enhanced Design.5D|Matrix of Leadership]], 4 alternate hands
{{toydesigner|[[Emiliano Santalucia]] (concept artist)}}

:Released as part of the first wave of the ''[[Transformers R.E.D.]]'' line, Optimus Prime is a non-transforming 6-inch action figure akin to the ones from Hasbro's ''[[Marvel Comics|Marvel]] Legends'' and ''[[Star Wars (franchise)|Star Wars]] The Black Series'' lines. He is highly articulated and features extensive paint operations for [[show-accuracy]].

:Optimus comes with six hands altogether: a pair of closed fists, a pair of gently beckoning hands, a right hand for his included [[Ion blaster|Ion Blaster]] accessory, and a right hand with the index finger extended. He also features an [[Energon-axe|Energon Axe]], compatible with either wrist in place of his hand. Lastly, he includes a Matrix of Leadership, which can store in his chest thanks to his opening windows.

:As with all ''R.E.D.'' toys, Optimus Prime was a Walmart exclusive in Canada and the United States, and was later made available on [[Hasbro Pulse]] in limited quantities.

: This mold was used to make ''R.E.D.'' [[Ultra Magnus (G1)/merchandise#R.E.D. .5BRobot Enhanced Design.5D|Ultra Magnus]].
{{-}}

==''Super Cyborg''==
[[File:SuperCyborgOptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (2018)
**''Accessories'': Ion blaster, torso plate

:''Super Cyborg'' Optimus Prime is an 11-inch-tall non-transforming figure with 7 points of articulation. Its main distinguishing feature is that the entire front of the robot torso is removable, exposing not just the expected Matrix of Leadership but also many other sculpted mechanical details within Prime's body.

*'''Optimus Prime (clear)''' (2018)
**''Accessories'': Ion blaster, torso plate

:The transparent plastic version of this figure was exclusive to [[San Diego Comic-Con]] 2018.

*'''Optimus Prime (Dead)''' (2018)
**''Accessories'': Ion blaster, torso plate

:This dark grey version was exclusive to [[New York Comic Con]] 2018.

*'''Optimus Prime (Clear Red / Blue)''' (2023)
**''Accessories'': Ion blaster, torso plate

:This translucent version was exclusive to New York Comic Con 2023.
{{-}}

==Figural Bag Clip==
[[File:FiguralBagClip OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2020)
:Released by [[Monogram]], this 2.5" 3D foam bag clip takes the form of a chibi Optimus Prime.

:It was available only as part of a [[Blindpacking|mystery blind bag]] collection.
{{-}}
[[File:FiguralBagClip 2021 Optimus.JPG|thumb]]
*'''Optimus Prime''' (2021)
:A non-articulated, non-transforming 3" figure of Optimus Prime with an attached clip, also released by Monogram.

:Unlike the previous year's release it was sold on a standard cardback.

{{-}}

==D'elicce==
{{note|All Easter eggs listed below were exclusive to Lojas Americanas, a popular Brazilian chain store.}}
[[File:Brazilian Transformers Easter Eggs 2021.jpg|250px|thumb]]
*'''Transformers Easter egg''' (90g, 2021)
:In 2021, [[Brazil]]ian chocolate manufacturer Top Cau, under its kid-focused branch D'elicce, released a pair of ''Transformers''-themed [[Easter]] eggs that included a popcorn bucket of [[super deformed|cutesy proportions]] based on either Optimus Prime or Bumblebee.

{{-}}{{anchor|delicce2025}}
[[File:Brazilian Optimus Prime Easter Egg 2025.jpg|thumb|250px]]
*'''''Transformers'' Easter egg''' (90g, 2025)
:In 2025, D'elicce (or rather "Delice" as its spelled in some parts of this product) released an Optimus Prime-themed egg that came with a single piece of red plastic molded after the character's evergreen truck mode with trailer attached, inside of which the egg comes stored. Unfortunately, it means that not even his wheels can roll.

:The toy comes with a stickersheet that must be applied manually and is not packaged with pre-applied stickers as shown in the official stock photos.

{{-}}

==''Minimates''==
*'''Optimus Prime''' (Series 1, 2021)
**''Accessories'': Laser rifle, energy axe, stand

:Part of the first wave of Transformers [[Minimates]] from Diamond Select, this Optimus Prime is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. The Matrix of Leadership is printed on the Minimate figure's chest and is visible through the windows on the chest covering. Due to their small size, all 4 figures in each series are sold in the same blister card.

*'''VHS Minimates Box Set''' (2022)

:''Minimates'' Optimus Prime was rereleased as part of a [[San Diego Comic-Con]] 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles a [[Family Home Entertainment]] VHS tape. Only 2500 of this set were produced.
{{-}}

*'''Stasis Lock Optimus Prime''' (2023)
:Another San Diego Comic-Con brought another VHS-cassette-themed ''Minimates'' 4-pack exclusive, with another redeco of Optimus Prime - this time depicting him in "stasis lock" (meaning his grey dead color scheme, now with an opening empty chest compartment). Only 1500 of this set were produced.
{{-}}

==''ULTIMATES!''==
[[File:Super7 Ultimates Optimus Prime (G1).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion blaster, energon axe, Matrix of Leadership, surfboard, jetpack, basketball, energy restraints, left & right fists, 2 open hands, right gripping hand, left pointing hand, alternate head

: Part of the first wave of ''[[Super7#Transformers ULTIMATES!|Transformers ULTIMATES!]]'' from [[Super7]], Optimus Prime is a 7-inch-tall action figure based on his cartoon model. He features multi-directional joints at the neck, shoulders, wrists, hips, and ankles; plus swivel biceps, elbows, knees, and a bit of ab crunch. His hands pop out at the wrists so they can be replaced with his additional spare hands in different poses (or the obligatory Energon Axe), and his head can be replaced with an alternate based on the original Optimus toy.

: He also features a ''lot'' of accessories, more than any other toy in the wave, including a number of episode-specific ones: [[Sideswipe (G1)|Sideswipe's]] jetpack from "[[More than Meets the Eye, Part 3]]", a ridable surfboard from "[[The Ultimate Doom, Part 3]]", energy restraints from "[[S.O.S. Dinobots]]", and his giant basketball from "[[The Master Builders (episode)|The Master Builders]]". He also includes a miniature [[Spike Witwicky (G1)#ULTIMATES!|Spike Witwicky]] figurine.

: Preorders for Optimus Prime (and the rest of Wave 1) opened on [[January 29]] 2021, and closed on [[February 28]], with the toys purportedly shipping in winter of that year but not actually arriving until May 2022.

{{-}}{{anchor|Alligaticon}}
[[File:Ultimates Alligaticon.jpg|upright=1.66|thumb]]
<ul class="iconlist">{{Bp-d1|'''Alligaticon''' (2022)}}</ul>
:*''Accessories'': Optimus Prime head; Optimus Prime rifle; Decepticon tower tip w/ arm; [[Battle taxi]]

: Part of the third wave of ''ULTIMATES!'', the [[Alligaticon#Merchandise|Alligaticon]] is a 10-inch-long non-transforming figure made to emulate the the Optimus-parts creature's cartoon model to pretty exacting detail (including the ''lack'' of detail on most of its flat surfaces). It makes ample use of multi-swivel joints to give its limbs a relatively wide range of motion, plus extensive tail jointing, a mid-body bend, some neck waggle, and an opening jaw.

: It comes with multiple "[[City of Steel (episode)|City of Steel]]"-themed accessories, including a tower with Optimus's arm attached to it. The arm is permanently attached, but the hand uses the same wrist-joint as the individual Optimus figure, and can be popped off and replaced with his other hands if you like (Optimus's wrist-pegs are larger than many other figures', so sadly cross-compatibility is limited at best). Curiously, while the arm appears to be identical to the prior figure's arm, the gun is not, having a trigger guard the original version lacks.

: It also comes with Optimus's disembodied head on a ball-jointed "neck" with trailing wires. Like the arm, the head is the same mold as the original Optimus, but this time cast in clear-blue plastic painted over, with a small gap in the back of the head to attempt [[light-piping]]... but depending on the strength of the light, it might just shine through the paint. Since it's the same mold, one could theoretically swap it out, but trying to push that wire-mass back into the socket seems like it'd be a bit of a pain in the neck (wocka wocka!).

: Preorders for the Alligaticon (and the rest of Wave 3) opened on [[December 1]], 2021, with the toys projected to ship in fall 2022... and ''actually'' shipping in November 202''3''.

{{-}}{{anchor|Ultimates2}}
[[File:Super7 Ultimates Optimus Prime (Fallen Leader).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Fallen Leader)''' (2023)}}</ul>
:*''Accessories'': 2 fists, 2 open hands, 2 Matrix-grip hands, trigger-grip right hand, Matrix of Leadership, Matrix cover, ion blaster

: This retool and redeco of ''ULTIMATES!'' Optimus Prime is the latest of several representations of his dead body from "[[The Transformers: The Movie]]," now with a greyscale paint scheme, a heavily damaged left torso section, and cracks all over him (and on his rifle too for good measure). His chest is redesigned to allow it to open and reveal the Matrix.

: Preorders opened in June 2022, with the expectation that of figures shipping in May 2023.... but actually January 2024
{{-}}

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': ion blaster

: The original ''ULTIMATES!'' Optimus Prime was repackaged as a "Transformers Deluxe" figure, physically identical to the first release but now lacking all accessories except the gun. Its new packaging resembles a VHS clamshell box; specifically, the colors and trade dress strongly resemble the [[Video Gems]] tapes, while the character artwork and subtitle are taken directly from the [[The Original Transformers|Kid Rhino]] tapes.

: This piece was exclusive to, of all things, Macy's.

==''Pop!''==
[[File:Funko Pop Optimus Prime G1.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:Released as part of the ''Pop! Retro Toys'' segment, [[Funko Pop!|Funko]]'s ''Pop!'' Optimus Prime is a super deformed vinyl figure based on his original Generation 1 toy, though his eyes are painted blue like in the cartoon.

:This mold was later redecoed as [[Nemesis Prime (G1)#Pop!|Nemesis Prime]].

{{-}}{{anchor|PopMetallic}}
[[File:Funko Pop Amazon Metallic Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:An [[Amazon (website)|Amazon]] exclusive redeco of the figure above, this version of Optimus Prime features a more metallic paintjob.

{{-}}{{anchor|PopGIJoe}}
[[File:Funko Pop Mystery Box Optimus Prime Cobra Commander.jpg|thumb|upright=1.44]]
*'''Funko Mystery Box: Transformers vs. G.I. Joe''' (Giftset, 2021)
**''ID number:'' '''44'''

:Available only as part of a GameStop exclusive giftset, this retooled Optimus Prime comes with his Energon axe attached to his right hand instead of his ion blaster and comes [[Blindpacking|blindpacked]] inside a ''Transformers vs. [[G.I. Joe (franchise)|G.I. Joe]]''-themed lunch box alongside a ''Pop!'' [[Cobra Commander#Pop!|Cobra Commander]] figure, a Decepticon logo decal, a Cobra logo keychain, and a set of four pins of Optimus Prime, Cobra Commander, [[Megatron (G1)/merchandise#Pop!|Megatron]] and [[Duke (G.I. Joe)#Pop!|Duke]].

{{-}}{{anchor|PopJumbo}}
[[File:Funko Pop Jumbo 10-inch Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (Jumbo size, 2021)
**''ID number:'' '''71'''

:A larger version of the regular ''Pop!'' Optimus Prime measuring 10-inches tall.

{{-}}{{anchor|PopKeychain}}
[[File:Funko Pocket Pop Keychain Optimus Prime.jpg|thumb|upright=1.11]]
*'''Optimus Prime''' (Pocket ''Pop!'' Keychain, 2021)

:A smaller version of the regular ''Pop!'' Optimus Prime with a keychain attached to his head.

{{-}}{{anchor|Digital Pop!}}
*'''Optimus Prime''' ([[Funko Pop!#Digital Pop! NFTs|Digital ''Pop!'']], 2022)
**''Rarity:''
***''Monochrome:'' '''Common'''
***''Static:'' '''Common'''
***''Glowing:'' '''Uncommon'''
***''Chrome:'' '''Rare'''
***''Original:'' '''Epic'''
***''Monochrome, Matrix-opening:'' '''Epic'''
***''Gold, Matrix-opening:'' '''Grail'''
:{{W|Non-fungible token|NFT}}s depicting Optimus Prime in the Funko style. Some variants are depicted opening the Matrix over Cybertron, one of which (the Grail one) could be redeemed for a chance to get a physical version of the depicted figure. Said variant was limited to 999 pieces.
<center><gallery heights=200>
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_MONOCHROME.gif|Remember [[The many deaths of Optimus Prime#The Transformers: The Movie|this one?]]
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_STATIC.gif|Not gray, but still may as well be dead.
File:TRANSFORMERS_UNCOMMON_OPTIMUS-PRIME_GLOW.gif
File:TRANSFORMERS_RARE_OPTIMUS-PRIME_REDCHROME.gif|[[The Return of Optimus Prime, Part 1|Oops.]]
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME_ORIGINAL.gif
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME-GOLDVARIANT_MONOCHROME.gif
File:TRANSFORMERS_GRAIL_OPTIMUS-PRIME-GOLDVARIANT_ORIGINAL.gif
</gallery></center>
{{-}}{{anchor|PopDigital}}
[[File:Funko Pop Digital Optimus Prime.jpg|thumb|upright=1.44|Stealing NFTs is the right of all sentient beings.]]
*'''Optimus Prime''' (2022)
**''ID number:'' '''49'''

:Part of the ''Pop! Digital'' segment, this regular-sized vinyl figure portrays Optimus opening the Matrix of Leadership and is entirely painted gold. It could only be acquired by redeeming the Grail NFT above.

{{-}}{{anchor|Pop! Pin}}
[[File:Funko-Pop-Pin-Optimus-Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (''Pop!'' Pin, 2022)
**''ID number:'' '''18'''
**''Accessories:'' Display stand
:A metallic enamel pin based on Optimus Prime's vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

:A "redeco" of this pin as [[Nemesis Prime (G1)#Pop! Pin|Nemesis Prime]] was also released as a limited edition chase variant.

{{-}}{{anchor|Pop! Masks}}
[[File:Funko Pop mask Optimus Prime.jpg|thumb|upright=1]]
*'''Optimus Prime''' (''Pop!'' Masks, 2022)
:Released by Disguise Costumes in collaboration with Funko and exclusive to Walmart, ''Pop!'' Masks Optimus Prime is a large half face mask based on the head of the vinyl figure.

{{-}}{{anchor|Pop! Hallmark}}
*'''Optimus Prime''' (Christmas tree ornament, 2022)
:Released by [[Hallmark]] and also exclusive to Walmart, this Optimus Prime Christmas tree ornament is virtually identical to the vinyl figure in appearance.

{{-}}{{anchor|Fundays1}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Exclusive to a Funko-oriented event called Fundays, this regular-sized vinyl figure portrays [[Freddy Funko]] cosplaying as Optimus Prime. The body of this figure is the same as the regular Optimus, while the head has been modified to incorporate Freddy's face. This regular version was limited to 1500 pieces.

{{-}}{{anchor|Fundays2}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:A metallic version of the Freddy Funko as Optimus Prime figure was also available, now limited to only 500 pieces.

{{-}}{{anchor|Fundays3}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Also available and limited to 500 pieces was a version of Freddy Funko as Optimus Prime that glows in the dark.

{{-}}{{anchor|PopPotato}}
*'''Mr. Potato Head Optimus Prime''' (''Pop! Digital Retro Toys'', 2022)
**''Rarity:'' '''Grail'''
**''ID number:'' '''127'''
:Similar in concept to other [[Mr. Potato Head]] toys, this vinyl figure is a representation of said character taking the appearance of Optimus Prime, except it can't be taken apart piece by piece.

:This figure is limited to 1550 units and can only be acquired redeeming an NFT representing this version of the character.

{{-}}{{anchor|PopLights}}
*'''Optimus Prime''' (Lights and Sounds, 2023)
**''ID number:'' '''120'''
**''Accessories:'' Base
:A standard-sized figure released in the ''Retro Toys'' line, "Lights and Sounds" Optimus Prime features... well, lights and sounds. He also includes a display base, and is posed with his left arm pointing forward and his right hand holding his blaster.

:This figure is exclusive to the Funko Shop online store.

{{-}}{{anchor|Pop! Tee}}
*'''Optimus Prime Tee''' (T-shirt, 2023)
:A T-shirt available on Funko's online store, it features artwork of ''Pop!'' Optimus Prime in the same pose and style as the original Generation 1 Optimus Prime packaging art.

{{-}}{{anchor|Pop40Years}}
*'''Optimus Prime''' (2024)
**''ID number:'' '''131'''

:Released in celebration of the 40 years of the franchise, this regular sized ''Pop! Retro Toys'' Optimus Prime is a similar mold to the original release, but is doing a different pose and features toy-accurate yellow eyes.

{{-}}{{anchor|Pop40Years2Pack}}
*'''Optimus Prime & Megatron''' (2-pack, 2024)

:A Hot Topic exclusive release of the 40th anniversary Optimus Prime and [[Megatron (G1)/merchandise#Pop40Years2Pack|Megatron]] vinyls with a metallic finish to their paintings.
{{--}}

==Modern Icons==
[[File:Modern_Icons_Optimus_Prime_helmet.jpg|thumb|upright=1.66|GIVE ME MY FACE.]]
*'''Optimus Prime Modern Icons Replica Helmet''' (December 27, 2021)
:A collaboration between Hasbro and statue and replica brand Modern Icons, this is a wearable helmet for adult collectors, based on Optimus Prime's head. It features light-up eyes and authentic sounds and phrases.

:Originally due for release on August 16, 2021, the Optimus Prime helmet was delayed until December 27 (as was [[Megatron (G1)/merchandise#Modern Icons|its Megatron counterpart]]). The helmet is a GameStop exclusive in the United States.
{{--}}

==''Super Shogun''==
*'''Optimus Prime''' (2021)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Another "retro-styled" non-transforming figure by [[Super7]], ''Super Shogun'' Optimus Prime is meant to be an homage to the 1970s "{{w|Shogun Warriors (toys)|Shogun Warriors}}" toyline. To match the famous features of those older toys, this Optimus stands 24" tall and is mostly made of hollow plastic, with 3 points of articulation, wheels on his feet, and a spring-loaded firing left fist. His chest doors open to reveal a removable Matrix of Leadership. Suggested retail price was $350 - hopefully if you're old enough to remember "Shogun Warriors" you've gotten a good job by now.

*'''Optimus Prime (Fallen Leader)''' (2022)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Continuing the trend from their ''ReAction'' and ''ULTIMATES!'' Optimus Prime figures above, Super7 also produced a grey redeco of ''Super Shogun'' Optimus Prime representing his dead body. {{-}}

==''Zōteki''==
[[File:ZOTEKI-024-Optimus-Prime.jpg|thumb|upright=1.66|I farted.]]
*'''Optimus Prime''' ([[2021]])
**''ID number'': '''024'''

:A collaboration between [[Hasbro]] and statue/replica brand [[Jazware]], ''[[The Transformers (franchise)|The Transformers]]'' was added as a part of the ''[[Zōteki]]'' line alongside other iconic brands such as [[Marvel Comics|Marvel]], to recreate some of the main "Generation 1" characters. The 24th figure of the ''Zōteki'' line; Optimus Prime wields his iconic [[Ion blaster]].

:Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
{{-}}

==Eaglemoss==
[[File:EaglemossChess OptimusPrime.jpg|upright=1.11|thumb]]
* '''Transformers Gen-1 Chess Set''' (<s>2021</s>)
:In the planned [[Chess#Eaglemoss|Transformers Chess Set]] by [[Eaglemoss]], a relatively large and very well detailed statue of Optimus Prime was slated to be the standard King piece on the Autobot side.

:A Kickstarter campaign to raise the necessary funds for this project was launched, but failed to meet its goal by September 24, 2021 and the whole thing was canceled. The Optimus Prime piece managed to technically get a very limited release, however, as some online influencers in the ''Transformers'' fandom received copies gifted to them by Eaglemoss during the Kickstarter campaign.
{{canceledtoy}}
{{-}}

==e-HOBBY==
===''Transformers Character Card''===
{{anchor|TCC G1}}
[[File:Transformers Character Card G1 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Convoy & Megatron Set''' ([[January 25]], [[2022]])
**''ID number:'' '''01 & 02'''
{{toydesigner|[[Shin Sasaki]] (illustration)}}

:Released as part of the first wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Roller (G1)|Roller]]) and [[Megatron (G1)|Megatron]] (with [[Starscream (G1)|Starscream]], [[Thundercracker (G1)|Thundercracker]] and [[Skywarp (G1)|Skywarp]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#01|Translation of G1 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Laser}}
[[File:Transformers Character Card G2 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Battle Convoy & Megatron Set''' ([[March 14]], 2022)
**''ID number:'' '''11 & 12'''

:Released as part of the second wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime and Megatron in their ''[[Transformers: Generation 2 (franchise)|Generation 2]]'' bodies along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#LaserOptimusPrime|Laser Optimus Prime]]" toy.
::*''[[Source:Transformers Character Card#11|Translation of G2 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Black}}
[[File:Transformers Character Card Megatron Black and Convoy Black.jpg|upright=1|thumb]]
*'''Transformers Card Binder (includes 2 special cards)''' ([[November 1]], 2022)
**''ID number:'' '''EX'''

:Released in its fifth wave as something of a "season one finale" to the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this 40-slot binder intended to contain the entire ''Character Card'' series thus far is packed with a pair of holographic trading cards depicting super-deformed art of Optimus Prime and Megatron in the forms of their first e-HOBBY exclusive toys along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the ''[[Hybrid Style]]'' "[[Optimus Prime (G1)/toys#THS02B|Convoy Black Version]]" toy.
::*''[[Source:Transformers Character Card#EXOP|Translation of Optimus Prime Black Version's Transformers Character Card]]''
{{-}}

{{anchor|TCC Hero}}
[[File:Transformers Character Card Jhiaxus and Hero OP.jpg|upright=1|thumb]]
*'''Jhiaxus & Convoy Missile Trailer Set''' ([[February 6]], [[2023]])
**''ID number:'' '''41 & 42'''

:Released as part of the sixth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Jhiaxus (G2)|Jhiaxus]] and ''Generation 2'' Optimus Prime along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#HeroOptimusPrime|Hero Optimus Prime]] toy.
::*''[[Source:Transformers Character Card#42|Translation of Hero Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Matrix}}
[[File:Transformers Character Card Matrix and Alpha Trion.jpg|upright=1|thumb]]
*'''Alpha Trin & Convoy Set''' ([[April 22]], 2023)
**''ID number:'' '''49 & 50'''

:Released as part of the seventh wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of "[[Alpha Trion|Alpha Trin]]" and Optimus Prime touting the [[Matrix of Leadership]] along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus's card notably eschews the line's usual [[Power Plans]]-inspired motif for a reproduction of the original 1984 [[Package art#Hasbro|toy packaging mural]] in celebration of the line's 50th release.
::*''[[Source:Transformers Character Card#50|Translation of Optimus Prime (with Matrix)'s Transformers Character Card]]''

{{-}}

{{anchor|TCC Orion}}
[[File:Transformers Character Card Hot Rod and Orion Pax.jpg|upright=1|thumb]]
*'''Orion Pax & Hot Rodimus Set''' ([[August 14]], 2023)
**''ID number:'' '''59 & 60'''

:Released as part of the eighth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Orion Pax and "[[Hot Rod (G1)|Hot Rodimus]]" along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#59|Translation of Orion Pax's Transformers Character Card]]''

{{-}}

{{anchor|TCC Action}}
[[File:Transformers Character Card Action Master Megatron and OP.jpg|upright=1|thumb]]
*'''Convoy (Action Master) & Megatron (Action Master) Set''' ([[December 28]], [[2024]])
**''ID number:'' '''93 & 94'''

:Released as part of the thirteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Armored Convoy]]) and Megatron (with [[Neutro-Fusion Tank]]) in their [[Action Master]] forms along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#93|Translation of Action Master Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Autobot}}
[[File:Transformers Character Card Autobots and Primus.jpg|upright=1|thumb]]
*'''Primus and Cybertron Army Set''' ([[February]], [[2025]])
**''ID number:'' '''101 & 102'''

:Released as part of the fourteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Primus]] in the form of his [[Primus#2010|"Creator" toy]] and the Generation 1 [[Autobot]]s (as represented by Optimus Prime, [[Blaster (G1)|Blaster]], [[Eject (G1)|Eject]], [[Grimlock (G1)|Grimlock]], [[Prowl (G1)|Prowl]], [[Crossblades (G1)|Crossblades]], [[Jazz (G1)|Jazz]] and [[Turbo Board]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#102|Translation of the Autobots' Transformers Character Card]]''

{{comingsoontoy}}
{{--}}

===Acrylic keychain series===
[[File:E-Hobby Optimus Prime and Bumblebee keychains.jpg|upright=1|thumb]]
*'''Convoy & Bumble''' ([[October]], [[2022]])

:Released as part of the first wave of an [[e-HOBBY]] exclusive series, this pair of keychains depicts character art and assets re-used from Optimus Prime and [[Bumblebee (G1)|Bumblebee's]] [[The Transformers: Masterpiece|''Masterpiece'']] releases, namely [[Optimus Prime (G1)/toys#MP44|MP-44 Convoy]] and [[Bumblebee (G1)/toys#MP45|MP-45 Bumble and Spike 2.0]] respectively.

{{--}}

==''Authentics''==
{{anchor|ClipBot}}
[[File:ClipBotsPrime.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2018)

:''Clip Bots'' Optimus Prime is a small [[super deformed]] plush that can be "transformed" into a little tractor trailer by flipping it inside out. It features a plastic clip so it can dangle from whatever you clip it to.
{{-}}
{{anchor|22Mask}}
[[File:Authentics Optimus Prime Mask 2022.jpg|upright=1|thumb|Unlike some Optimus Primes, he'll [[Transformers: Revenge of the Fallen (film)#Quotes|give you his face]] instead.]]
*'''Optimus Prime''' (2022)

:Modeled after Optimus Prime's evergreen design, this [[roleplay toy]] mask was released along side an [[Bumblebee (G1)/merchandise#22Mask|Bumblebee]] version.
{{-}}
{{anchor|AquaPals}}
[[File:AquaPalsLargeOptimus.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2023)

''Aqua Pals'' Optimus Prime was released by [[WAHU]]. It is a plush made out of material designed to dry quickly, allowing it to be played with in water. The large plush is 24 inches tall.
{{-}}

{{anchor|DogToys}}
[[File:CrunchandsqueakOptimusPrime.jpg|upright=1|thumb]]

*'''Crunch & Squeak Optimus Prime''' (2023)

Manufactured by [[Gramercy Products]], ''Crunch and Squeak'' Optimus Prime is a simple dog toy, with a water bottle inside to be crunched. Because of this, its legs are fully attatched to each other. The embroidery color for the outline of the eyes varies, coming in gray or blue.
{{-}}
*'''Squeak & Tug Optimus Prime''' (2023)

''Squeak & Tug'' Optimus Prime is another dog toy by Gramercy Products. It has two rope knots connected from the bottom of each of its legs, for tugging purposes. It also has a mouth ''on top'' of its faceplate.

{{anchor|24Mask}}
[[File:Authentics_Optimus_Prime_Mask_2024.jpg|upright=1|thumb]]
*'''Optimus Prime Mask''' ([[2024]])

:Manufactured by [[Peachtree Playthings]], this mask is a completely new mold based on Optimus Prime's evergreen design, though it's a bit more stylized then the 2022 version. It was found at discount stores such as Dollar Tree with no prior announcement. As with the previous mask, it was released along side an [[Bumblebee (G1)/merchandise#24Mask|Bumblebee]] version.
{{-}}
{{anchor|CBoptimus}}
[[File:Authentics Cyber Battlers Optimus.jpeg|upright=1|thumb]]
*'''Cybertron Battlers Optimus Prime''' ([[2022]])
:Released in the ''Cybertron Battlers'' subline of ''Authentics'', this vinyl figure is a non-transforming, 5.5 inch rendition of Optimus Prime in his evergreen design with limited points of articulation. He has an Energon Axe molded into his right hand.

:He comes packaged either individually with a tag, or in twos in a box together with [[Bumblebee (G1)/merchandise#Authentics|Bumblebee]] and [[Megatron (G1)/merchandise#Authentics|Megatron]].
{{-}}

{{anchor|Teeturtlereverse}}
[[File:Small_Reversible_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Reversible Plushie Optimus Prime''' (2025)

:Released by [[TeeTurtle]], ''Reversible Plushie'' Optimus Prime is a round, [[super deformed]] plush, that can be turned inside out to reveal a truck alternate mode. A 3 inch version was released in blind boxes, while a 6 inch version was made available exclusively at [[Walmart]]. It appears to be based on Optimus Prime's [[evergreen]] design, with a license plate that reads 'ROLL OUT'.
{{-}}
{{anchor|Teeturtlecloudhead}}
[[File:Cloudheads_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Cloudheads Optimus Prime''' (2025)

:Also released by [[TeeTurtle]], ''Cloudheads'' Optimus Prime is another [[super deformed]] plush based off of Optimus's [[evergreen]] design. It is 5 inches tall. It has a large head, and its body is weighted with glass beads.
{{-}}

==Nendoroid==
[[File:Nendoroid G1 Optimus Prime.jpg|upright=1.66|thumb]]
*'''Nendoroid Optimus Prime (G1 Ver.)''' ([[2022]])
**''Nendoroid ID Number'': '''1765'''
**''Accessories'': Ion blaster, Energon-axe, pointing hand

:[[Nendoroid]] Optimus Prime is a [[super deformed]], adorable rendition of the original Autobot commander. It is the first Nendoroid figure released for a "Generation 1" character, as the first Nendoroid figures for ''Transformers'' were for the ''[[Bumblebee (film)|Bumblebee]]'' movie.

:As with most Nendoroids, Optimus Prime can interchange body parts with compatible figures, and comes with an alternative "pointing hand" accessory to aid with specific posing. The figure is packed with Optimus's trademark Ion blaster and Energon-axe weapons (generically referred to as a gun and an energy axe by the Good Smile Company website), the latter of which replaces Optimus's hand when wielded. He also features articulation at the head, knees, shoulders, elbows, and even his chest.

:This mold was later redecoed as [[Nemesis Prime (G1)#Nendoroid|Nemesis Prime]].
{{-}}

==Icon Heroes==
*'''Optimus Prime X Bumblebee Retro Pin Set''' (2022)
: A hard enamel pin based on Optimus Prime's original G1 package art made by Icon Heroes. It comes carded with a [[Bumblebee (G1)/merchandise#Icon Heroes|Bumblebee]] pin.

: This pin was also available in [[Nemesis Prime (G1)#Icon Heroes|Nemesis Prime]] colors.
{{comingsoontoy}}

{{-}}
[[File:Icon-Heroes-Optimus-Prime-Action-Statue.jpg|upright=1.11|thumb|''Of course'' we need another superdeformed Optimus Prime statue, why do you ask?]]
*'''Optimus Prime Action Statue''' ([[2023]])
: A 12" tall polystone statue of Optimus Prime holding his ion blaster and standing over an Autobot insignia base. The statue is slighty superdeformed with an unusually large head and features some neck articulation.

: Each sample is going to be individually numbered and come with a certificate of authenticity.
{{comingsoontoy}}

{{-}}

==Just Play==
{{anchor|Podpals}}
[[File:PodpalsOptimusLarge.jpg|upright=1|thumb]]

*'''Podpals Optimus Prime''' (2023)

Made by [[Just Play]], ''Podpals'' Optimus Prime is a rounded plush. It has tiny flaps of fabric for its legs and head details, while other details are printed on. There are two versions, an 8 inch version and a 3 inch version. They are identical besides their size.

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>

:Optimus Prime is a small, soft plastic figure, 2" tall, with no articulation. It's overall based on his appearance in the G1 cartoon. He does have a noticable lack of paint apps; most notably the windows on his chest not being painted at all.

:The packaging is G1-styled with the classic black-red gradient and the G1 Optimus Prime toy in the top right corner.

[[File:JustPlay_G1_Optimus_Prime.jpg|thumb|upright=.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>

:This figure is identical to the original release. Unlike the original release, however, he also comes with a foil sticker depicting his G1 design on a card with a sort of profile picture on the back and text underneath it saying "OPTIMUS PRIME IS THE LEADER OF THE AUTOBOTS." The packaging is also different as it no longer features Optimus Prime (having been replaced with a block advertising the new card).
: There's a variant of this found at stores like Dollar Tree where the block advertising the card is moved to the top left with a red circle that says "$1.25" in it in the top right instead.

{{-}}

==Kotobukiya==
===Bishoujo Series===
[[File:Bishoujo-Series-OptimusPrime.jpg|upright=1.3|thumb|Looking this good is the right of all sentient beings.]]
*'''Bishoujo Series Transformers Convoy/Optimus Prime''' (January 2023)
**''Accessories'': Alternate masked face
**''Known designers:'' [[Shunya Yamashita]] (artist)

:''[[Kotobukiya]] [[Bishoujo Series]]'' Convoy/Optimus Prime renders the classic Autobot commander as a cute anime girl (formally termed as a ''{{w|Bishōjo}}''). Bishoujo Optimus's necklace represents the [[Matrix of Leadership]], while Prime's trailer and wheels are represented as her suitcase and boots respectively.

:''Bishoujo Series'' Optimus Prime also comes with an alternate [[Mouthplate|masked]] headpiece, and a red display base designed after the Autobot insignia. A Deluxe Edition release also included a B5-sized acrylic board for display, featuring Yamashita's original artwork of the character.

:This statue was later recolored and retooled to create ''Bishoujo Series'' [[Nemesis Prime (G1)#Kotobukiya Bishoujo Series|Nemesis Prime]].
{{-}}
===Frame Arms Girl===
[[File:Kotobukiya-TF-Optimus-Prime-Fumikada-Shimane-Ver-kit.jpg|thumb|upright=1.66|Minerva's <s>Ginrai</s> Optimus Prime cosplay.]]
*'''Convoy/Optimus Prime Humikane{{sic}} Shimada Ver.''' (June 2025)
**''Accessories'': 5 pairs of hand parts, 2x2 Faceplates (Android, Human), Front hair/helmet parts for human face config, Ion Blaster, Energon Axe
**''Known designers:'' [[Fumikane Shimada]] (artist)

:Designed by Humikane (actually "Fumikane") Shimada of ''Frame Arm Girls'' and ''30 Minutes Sisters'' fame, this 135mm articulated ''FA Girl'' model kit (though technically not referred to as such on the box, she is listed as part of the ''FA Girl'' product line on Kotobukiya's website) of Optimus Prime/Convoy is another personified take of the character compared to the ''Bishoujo Series'' statue above. Aside from her hand parts and the two signature weapons, Optimus also comes with two types of faceplates, with two expressions for each, and a few front hair/helmet parts for each configuration. The rear truck wheels on her legs can be flipped down to form a pair of support skates.
{{--}}

==Micro Machines==
[[File:MMMPrime&Tracks.jpg|upright=1.66|thumb]]
*'''Optimus Prime Hauler Playset''' (2022)
**''Accessories'': [[Tracks (G1)/toys#Micro Machines|Tracks]] vehicle, decoder
{{charstubtoys}}

==XM Studios==
*'''Optimus Prime''' (2022)

:This hand-painted porcelain statue of Optimus Prime stands over 26" tall and features alternate arms to allow owners to display him in different poses or switching out his signature laser rifle for his energon axe. His chest-mounted Matrix of Leadership lights up, and the set also includes a sculpted version of the truck mode to display next to the robot. Suggested retail was about $1,700.

*'''Optimus Prime Bust''' (2023)

:A four-foot-tall bust of Optimus Prime, with hand-burnished metallic features and a $4,000 price tag.
{{-}}

==''Transformers × Mini World''==
[[File:MiniWorldOptimus.jpg|thumb|upright=1.66]]
*'''Optimus Prime''' (2023)
**''Accessories'': Transforming base, gun, axe, 2 smokestacks, machine part, crane arm, 2 connectors

:''[[Transformers × Mini World]]'' Optimus Prime is a tie-in to the popular [[China|Chinese]] game ''[[Mini World]]''. It comes with a display base which can fold up into a cube-shaped representation of Prime's truck mode, complete with rolling wheels. The figure can transform into a storage mode and store fully inside the cube, or you can remove his head and replace it with the folded up cube. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and axe accessories. The set includes two smokestacks that can be pegged onto the truck-cube mode.

:Each set includes [[Build a Figure]]-like machinery components which can be combined with parts from other sets to make new structures.

:It is exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.
{{-}}

==Mochibots Transformers Plush==
[[File:MochibotsPrime.jpg|upright=1.3|thumb|It was either this or a banana to show how tall I am. And I'm ''NOT'' Primal!]]
<ul class="iconlist">{{Bp-a1|'''Mochibots "Transformers" Plush Convoy''' (2023)}}</ul>
:Apart of the line of cute, cuddly Transformers Plushies, [[Mochibots Transformers Plush|Mochibots]] Convoy (otherwise known as ''Optimus Prime'') is a 5.5 CM tall variation of the character, with Sunbow cartoon-accurate white pants and all! This Convoy is given a "Fumo" stylization, making the robotic detailing more rounded and soft, with stubby limbs and a cute, somewhat stern expression. Every detail is sewn-in, leading to him and the rest of the Mochibots line having a premium feel, with added texture and depth added to each detail. In addition to all this cute Convoy's offerings, he has a block of stuffed material in the back to represent his "Backpack", and a stitched-on Autobot logo! Though, much like [[Cliffjumper (G1)/toys#Mochibots Transformers Plush|Cliff]], the Autobot logo seems to have a squinting expression, likely a limitation of how far the detail can go with this process. Like many other Mochibots, Convoy also features a special, reflective material in his eyes and windows, with light giving it a special shimmer effect whenever it hits it.

:Convoy was released in the Summer of 2023 in "Volume 1" of the Mochibots line, alongside Cliff, Bumble, and Convoy's Shattered Glass counterpart. This line was exclusive to China and Japan, with almost all of them being locked to Asia via [[amiami|amiami's]] digital storefront.

{{-}}

==Fools Paradise==
{{anchor|LOWFOOL}}[[File:LOWFOOL League of Steel Optimus Prime.jpeg|upright=1.66|thumb|Some contrast to the bishoujo, huh?]]
*'''Optimus Prime''' (2023)
**''Accessories'': Football

:Part of a collaboration between Hasbro and [[Hong Kong]]-based online store ZCWO, Optimus Prime joins the "League of Steel" subline of [[Fools Paradise]]'s LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues of [[Neon Genesis Evangelion|Evangelion]]s and {{w|Gundam}}s. He is depicted as a human man wearing heavily Optimus Prime-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache (not, as you might surmise, as a reference to [[Peter Cullen]]'s own face fuzz).

:Preorders for Prime opened in June 2023, with a projected release date of November.

{{-}}

{{anchor|ZCWO}}[[File:Fools Paradise Optimus Prime statue.jpeg|upright=1.3|thumb]]
*'''Optimus Prime''' (2024)

:A second statue of Optimus Prime by Fools Paradise portrays Optimus Prime in a much more conventional (if heavily stylised) design. This vinyl statue of Prime stands approximately 60cm tall, and features light up LED eyes and apparently boasts a full range of articulation. It also features a somewhat weathered paint job.

:Preorders opened in November 2023, with a projected release date of March 2024.
{{comingsoontoy}}

{{-}}

==McFarlane Toys==
{{anchor|PagePunch}}[[File:Page Punchers Optimus Prime and Megatron.jpeg|upright=1.66|thumb|If you squint, you can just ''barely'' make out the lack of a waist swivel.]]
*'''Optimus Prime and Megatron''' (2024)
: ''[[Page Punchers]]'' Optimus Prime is 3-inch non-transformable action figure based off his [[IDW Publishing|IDW]] design.

: He comes in a two-pack with [[Megatron (G1)/merchandise#PAGEPUNCH|Megatron]], packaged with [[New Cybertron Part 1: To Walk Among the Chosen|''Optimus Prime'' #1]] and [[Dissolution Part 6: This Machine Kills Fascists|''Lost Light'' #6]].

{{-}}

==''Hot Wheels''==
{{picsneeded}}
{{anchor|HWTrackFleet}}
[[File:Hot Wheels Track Fleet Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1| '''Optimus Prime''' (Track Fleet, 2024)}}</ul>
:*''Accessories'': Trailer (detachable)
{{toydesigner|[[Charlie Angulo]] ([[Mattel]])}}
:''[[Hot Wheels (franchise)|Hot Wheels]]'' Track Fleet Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Unlike the concurrently released [[Bumblebee (G1)/merchandise#HWScreenTime|''HW Screen Time'' Bumblebee]], Optimus does ''not'' have a sculpted robot face on his undercarriage.

{{-}}{{anchor|HWSkate}}
[[File:Hot Wheels Skate Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Skate, 2024)}}</ul>
:*''Accessories'': Finger sneakers
:Part of the ''Hot Wheels Skate'' subset, this is an Optimus Prime-themed finger skateboard that comes with a pair of red finger sneakers. The shape and packaging use Dreamwave-era artwork of Optimus Prime.

{{-}}{{anchor|HWScreenTime}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (HW Screen Time, 2025)}}</ul>
:*''Mainline ID number:'' 104/250
:*''HW Screen Time ID number:'' 6/10
{{toydesigner|[[Manson Cheung]] and Leeway Chang ([[Mattel]])}}
:''Hot Wheels'' HW Screen Time Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Compared to the ''Track Fleet'' version, this version of Optimus ''has'' a sculpted robot face on his undercarriage, is larger and does not feature a trailer. It is largely based on the transforming ''Mattel Creations'' version of Optimus but with some modifications for cost reasons.

{{--}}

==''Beyblade X''==
[[File:Beyblade_X_Transformers_OptimusPrime.jpg|thumb|Not pictured: Optimus Prime using this to part the Red Sea.]]
*'''Optimus Prime and Megatron Multipack Set''' (2024)

:'''Optimus Prime 4-60P''' was available in a two-pack with [[Megatron (G1)/merchandise#Beyblade X|Megatron 4-80B]], which was exclusive to Amazon in Hasbro territories, and exclusive B4-sponsored stores in Takara-Tomy territories. It consists of three pieces that can be interchanged with those of [[Beyblade#BEYBLADE X|other ''Beyblade X'' tops]]; an attacking "Blade" primarily made of metal, a "Ratchet" that locks parts together and determines height, and a "Bit" that touches the ground and determines movement.

:The "Optimus Prime" Blade features evergreen art of Optimus Prime on its central Gear Chip and is partial of the mainline ''Beyblade X'' Blade "Helm Knight". The Ratchet (4-60) and Bit (Point) are recolored parts from other ''Beyblade X'' tops.

:In Hasbro territories, a QR Code sticker hidden underneath the Blade can be scanned into the ''Beyblade X'' companion app. In Takara-Tomy territories, the QR Code stickers are omitted in favor of a Beycode Card packed with the instructions. However, scanning any of these QR codes only awards the player with in-app points, and will not unlock the Beyblade for in-game use like it would for any mainline ''Beyblade X'' tops.

{{-}}

==Yolopark==
===AMK===
{{anchor|AMKPro}}
[[File:YoloparkAMKProG1OptimusPrime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released as part of Yolopark's AMK Pro line, Optimus Prime comes in pre-assembled modules as opposed to traditional model kit runners. This allows him to be assembled quickly and easily without tools. Unlike Yolopark's regular AMK line, the AMK Pro line features diecast parts as well as light-up features. In Prime's case, his eyes will light up when tapping his head with a magnet. The feature requires one CR927 battery which is not included.

:The fully assembled figure resembles the ''Masterpiece'' Convoy 3.0 and features an opening Matrix chamber and fully articulated hands, eliminating the need for alternate hands. Both the ion blaster and Megatron gun can be wielded by his hands, though removing the stalk from the Megatron gun makes this much easier.

:The figure was redecoed into Nemesis Prime.

{{-}}
{{anchor|AMKHasbroEdition}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-(Hasbro-Edition).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Hasbro Edition, 2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Stand with Teletraan-1 Backdrop

:The AMK Pro Optimus Prime kit is re-released under the "Hasbro Edition" branding. In this release, the die-cast parts have been replaced with plastic, and the light-up feature and the Megatron gun accessory are no longer included. In addition, Prime's display stand also comes with an additional Teletraan-1 backdrop for the arm unit.

{{-}}
{{anchor|AMKComboSet}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-and-Megatron-Combo-Set-(Hasbro-Edition).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1d1|'''Megatron and Optimus Prime Combo Set''' (2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Energy Mace, Light Sword, Laser Pistol, Two display stands (Teletraan-1 Backdrop, Ark Backdrop)

:The "Hasbro Edition" of the AMK Pro Optimus Prime kit is also sold as a two-pack with the same line's Megatron. The 2-pack also comes with a unique pin.

{{-}}{{anchor|AMKClear}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Clear Color)''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released exclusively for the Cybertron Con 2024 in Shanghai, this Optimus Prime is a translucent redeco of the AMK Pro kit.

{{comingsoontoy}}
{{-}}{{anchor|2025AMK}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK, 2025)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Matrix of Leadership]]

:This AMK Optimus Prime only comes with his Ion Blaster and the Matrix of Leadership. In addition, He also features cartoon-accurate deco.

{{comingsoontoy|June 2025 release}}
{{-}}

===AMK Mini Series===
[[File:TF-Yolopark-AMK-Mini-Series-Optimus-Prime.jpg|thumb|upright=1.66|Swap my right arm with Megatron's so I could go to the offensive!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': 2 additional pairs of hands (Splayed, Pointing), [[Ion blaster]]

The ''AMK Mini Series'' Optimus Prime is a smaller version of the character, featuring swappable hand parts and his usual Ion Blaster.

:Initial images of the kit's hand-painted prototypes showed Prime utilizing a desaturated blue and red. His white parts are slightly darker, while his grill and abs are flat grey, and the chest windows are white. Unlike the prototype, the blue paint on the crotch is missing in the final product.

Optimus Prime is sold as either an individually marked single, a 2-pack with the same line's Megatron in a single box, or as a blind-box figure. This mold was also used to make [[Nemesis Prime (G1)|Nemesis Prime]] for the blind-box line, and [[Delta Magnus]] for the Agabyss-organized ''[[BotCon]] 2024'' exclusive House of Magnus BotCon VS Set.

{{-}}{{Anchor|AMKMiniIDW2005}}
<ul class="iconlist">{{Bp-a1|'''Orion Pax (IDW)''' (2025)}}</ul>

:This ''AMK Mini Series'' kit is based on Orion Pax's appearance in the 2005 ''IDW'' comics.

{{comingsoontoy}}
{{-}}

===BMK===
[[File:Yolopark-BMK-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Accessories'': [[Ion blaster]]

:The ''BMK'' (Which stands for "Beginner Model Kit") Optimus Prime is a larger version of the ''AMK Mini'', with the design being based on the ''AMK/Pro'' release. As with other ''BMK''s, Optimus features similarly basic articulation, consisting of a ball-jointed head, ball-jointed shoulders, single-axis 90-degree elbows, a rotating waist, and slightly swiveling ankles...that's it.

{{-}}

==Blokees==
===Galaxy Version===
{{anchor|Galaxy Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot/Decepticon insignias

:Released in the first wave of ''Galaxy Version'' line of blind boxes, [[Blokees]] Optimus Prime is a roughly 4-inch tall, highly-articulated, and non-transforming snap-on model kit of the Autobot leader. He is built on a "Standard Body" skeleton shared with other Blokees figures in the line, but with different body pieces to make them distinct. As advertised in the box, Prime has a pull rate of 1 in every 12 boxes, or three times across four cases.

:Prime comes with a pair of closed and open hands, along with a left hand molded in a pointing position exclusive to this figure. He also comes with his trademark Ion Blaster and Energon axe weapons—the former can be plugged into the closed hands, and the latter can be plugged into either wrist. The barrel of the Ion Blaster is compatible with the blast effects included with Ironhide, Megatron, and Skywarp. He also has a stand with four studs on top, which he can plug into and connect to similar stands. Optimus can also accommodate the jetpack included with Sideswipe, which was released as part of the ''Shining Version'' lineup.

:If one chooses, Prime's inner shoulder parts and elbow joints can be swapped with the red-colored pieces from the same lineup to create a more cartoon-accurate coloration.

:His body parts are redecoed to make ''Galaxy Version'' [[Optimus Prime (SG)#Blokees|Shattered Glass Optimus Prime (IDW)]], [[Ultra Magnus (G1)/merchandise#Blokees|Ultra Magnus (DW)]], and [[Nemesis Prime (G1)#Blokees|Nemesis Prime]].

{{-}}{{anchor|BlokeesMetallic}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot and Decepticon insignias

:The chase figure of ''Galaxy Version'' 01, with a much slimmer pull rate of 1 in every 36 boxes, i.e. once in four cases. Prime is redecoed in a metallic sheen, save for the joint pieces along with more show-accurate deco on the crotch, thighs, back, and shins. He comes with the same accessories as his regular counterpart.

{{-}}
{{anchor|BlokeesPink}}
[[File:Blokees Cybertron Con 2024 Pink OP.jpg|thumb|upright=1.4|Not the kind of [[fandom:gundam:Trans-Am_System|Trans Am]] you'd expect Optimus Prime to turn into.]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Pink)''' (Galaxy Version, 2024)}}</ul>
:*''Accessories:'' Pair of open hands, one pointing left hand, Energon Axe, Ion Blaster, Matrix of Leadership with support stand

:Released exclusively for the Cybertron Con 2024 event, this Optimus Prime kit is sold as a pre-assembled redeco of the first Galaxy/Shining Version kit, featuring opaque and translucent <s>[[energon]]</s> pink livery, and omits the light-up feature. He comes with all weapons and hand accessories from the original Galaxy Version release and the Matrix/support stand from the Shining Version.

:This Optimus Prime is limited to 999 units, with 400...no, 100<ref>{{citesocial|quote=Dear Fans, We sincerely regret to inform you that the on-site sales of the exclusive item - Optimus Prime (Pink) at the 2024 Transformers Cybertron Con have been temporarily canceled. We apologize for any inconvenience this may cause! As of today (December 6), we have sold 100 units, 300 remaining units would be sold through other sales channels, please stay tuned for our further announcements. Thank you for your understanding and support!|link=https://twitter.com/BlokeesOfficial/status/1864925074991780214|name=BLOKEES.OFFICIAL|site=Site Formerly Known as Twitter|year=2024|month=12|day=06}}</ref> sold at the convention, and the rest distributed through online and physical stores across mainland China.

{{-}}{{anchor|GVParallelUniverse}}
[[File:Blokees-TF-Galaxy-Version-06-IDW-Optimus-Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The sixth wave of the ''Galaxy Version'' blind boxes features an Optimus Prime based on his design and coloration from the IDW story [[The Transformers: Stormbringer|''Stormbringer'']]. In addition to the new hand runner introduced in the 4th wave, Optimus comes with his twin cannons and blaster accessory, complete with its blast effect. Like the other ''Galaxy Version'' kits since Wave 5, Optimus features a slightly upgraded suite of standard body parts, notably the sturdier pre-assembled hinge joints and the multi-colored head piece with color-coded eyes.

:As advertised in the box, he has a pull rate of 1 in every 12 boxes.

{{-}}
[[File:Blokees-TF-GV-06-Hidden-Orion-Pax.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The chase figure of ''Galaxy Version'' 06, with 1:36 odds, this Optimus Prime (now called "Orion Pax") kit is a redeco of the kit above, representing the force field-equipped coloration activated by Trailbreaker in "[[Elegant Chaos Part 1: All Our Parlous Yesterdays]]".

{{-}}{{anchor|BlokeesIDWTrans}}
<ul class="iconlist">{{Bp-a1|'''IDW-Optimus Prime (Transparent Edition)''' (2025)}}</ul>
:*''Accessories:'' Pair of open hands, pair of wrist blasters, Ion Blaster

:A translucent redeco of ''GV 06'' Optimus Prime with an iridescent finish, coming pre-assembled in blister packaging. This figure had a run of 999 units, with the first 61 distributed at an event in Chengdu Station, China on June 1, 2025.

{{-}}{{anchor|GV08}}
[[File:Blokees-TF-GV08-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster

:The eighth wave of the ''Galaxy Version'' blind boxes features another new mold of Optimus Prime in a Generation 1-inspired look, but with a new set of outward forearm armor, and he only comes with his Ion Blaster. In addition to the ball-jointed waist from the previous entry, Optimus also features updated articulation, including a slide-down hip joint axis, rotating upper thigh joints, and improved double-jointed knee articulation, similar to his wave mates. This Optimus can also accommodate Sideswipe's backpack from the ''Shining Version'' line.

:Because the newly designed knee joints are made to fit the narrow gaps in the thighs and lower legs, they are incompatible with joints from previous releases, including those used for the elbows.

:If one chooses, Optimus' forearm armors can be omitted for greater accuracy.

:Along with the rest of the wavemates, Optimus is first revealed at Blokees' booth at the IBTE 2025 (Indonesia International Baby Products & Toys Expo) event.

{{-}}{{anchor|GV08Hidden}}
[[File:Blokees-TF-GV08-Optimus-Prime-Hidden.jpg|thumb|250px|Thanks for helping me... pull myself together...''I guess.'']]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hidden Style)''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, half-dead chest plate, metal splinter

:The chase figure of ''Galaxy Version'' 08, with the standard chase odds of 1 in every 36 boxes, this kit of Optimus Prime is a redeco of the regular kit above in metallic paint and molded plastic, featuring a "half-alive, half-dead" appearance. In addition to his identical accessories, Prime features an alternate front chest block with a gash that is compatible with the included metal splinter (referred to as an "Energon Axe"...okay.).

{{-}}
<ul class="iconlist">{{Bp-a1|'''Metroplex''' (Galaxy Version, 2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''

:The ''Galaxy Version'' Metroplex kit comes with a non-poseable figurine (and obviously out of scale) of Optimus Prime, and he can be pegged onto one of his open-palm hands. As he was molded from merely dark gray plastic, he can be painted in full color (or onto any of the other characters that share his appearance) if you wish.

{{-}}

===Shining Version===
{{Anchor|Shining Version}}
[[File:Blokees-TF-Shining-Version-01-Shining-Roll-Out-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 01 - Shining Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (weapon-holding, splayed), ion blaster, Energon Axe, Matrix of Leadership with support stand, holdable Autobot and Decepticon insignias

:Released in the first wave of Blokees' ''Shining Version'' line, this version of the ''Galaxy Version'' Optimus kit now features painted translucent face and chest parts, and a torso frame that lights up upon shaking (or at least just lightly tap some areas on the torso), causing the eyes and the Matrix pattern tampographed on his chest window to glow for a limited time. In addition to his identical accessories from the Galaxy Version release, Optimus also comes with a single Energon Cube, a separate Matrix with a support stand, and a new, larger figure stand.

:The Matrix features a pair of tabs on each handle, compatible with most ''Galaxy/Shining Version'' kits that include open-palm hands, not just Prime.
{{-}}{{anchor|BlokeesG1Toy}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:The second wave of the ''Shining Version'' series introduced a second Optimus Prime mold styled after his [[Optimus Prime (G1)/toys#The Transformers|original Generation 1 toy]], complete with an ion blaster modeled after it. As with the first ''Galaxy Version'' kit, this Optimus can accommodate Sideswipe's backpack from the ''Shining Version'' line.

{{-}}{{anchor|BlokeesG1ToyMetallic}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (Shining Version, 2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:This chase variant of the above toy-style mold is, like the ''Galaxy Version'', redecoed into metallic colors along with more toy-accurate tampographs and retains the same accessories. The eye and window pieces are now molded with orange-ish red translucent plastic instead of blue.

{{-}}{{anchor|ShiningPax}}
[[File:Blokees-TF-Shining-Version-03-Orion-Pax.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' ([[2025]])}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' 2 pairs of hands (fists/accessory-holding, splayed open-palm), Gun, figure stand

:The third wave of the ''Shining Version'' series introduced a new mold styled after his Orion Pax appearance in ''IDW Publishing'''s "Spotlight Orion Pax" comic. As with later Galaxy Version kits since Wave 5, Orion features sturdier pre-assembled hinge joints.

:Since Orion's chin is slightly too long, fully inserting the ball joint may cause his head to ''slightly'' look upwards. To prevent this, insert the ball joint into Orion's head socket first, and then attach it to the torso frame's peg hole until you feel the friction between the joint and the hole without fully inserting it.

:If you're a speed builder, be mindful when attaching the pre-assembled joints; Unlike the symmetrical joints from earlier waves, the pegs on both ends of these joints are designed to connect to specific pieces; The tabs with slightly smaller holes are intended for the upper arms and thighs, while the regular tabs are meant for the forearms and lower legs. While an incorrect knee joint assembly may cause it to very slightly lean when standing straight or in an A-stance, an incorrect elbow assembly won't be noticeably affected unless you're looking very closely.

{{-}}

===Box Sets===
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Exclusive-Yearly-Version).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon''' (2024)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, Energon Axe, Matrix of Leadership with support stand, figure stand, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:This special edition box set included [[Electrum]]-inspired gold redecoes of ''Shining Version'' (See above) Optimus Prime as well as [[Prowl (G1)/toys#Exclusive Yearly Version|Prowl]], [[Ironhide (G1)/toys#Exclusive Yearly Version|Ironhide]], [[Long Haul (G1)/toys#Exclusive Yearly Version|Long Haul]], and [[Starscream (G1)/merchandise#Exclusive Yearly Version|Starscream]], where they also receive translucent redecoes of face and chest parts painted on.

:As with the rest of his pack-in mates in this set, Optimus suffers from a case of [[Gold Plastic Syndrome]], as his molded gold hinge joints can potentially snap off due to the swirly plastic.

{{-}}
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Yearly-Version-Set-2-Optimus-Prime-(G1-Toy).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon - Defence''' (2025)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, figure stand, blast effect, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:The 2025 Yearly Version box set now features an Electrum-inspired redeco of the toy-based ''Shining Version'' Optimus Prime kit. In addition to the identical accessories, he also comes with two additional impact effects for the figure stand.

:Like the rest of this box set's kits, Optimus' hinge joints are now molded in a more mustard yellow-ish plastic, reducing the Gold Plastic Syndrome-related issue plagued from the previous release.

{{-}}

===Action Edition===
[[File:Blokees-TF-Action-Edition-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Action Edition, 2024)}}</ul>
:*Accessories: Ion Blaster, Energon-Axe, Jetpack, Wrist Communicator, Holomatter avatar, Matrix of Leadership, Index finger parts (Fist, Pointing, Trigger-finger), display stand with magnet-powered faction symbol block

:The "Action Edition" Optimus Prime is a 7-inch (approx 18cm) model kit with a slightly more complex build and features an inner frame (equivalent to the ones used for ''Bandai'''s "Master/Perfect/Real Grade" kits) with greater articulation points than his other ''Galaxy Version'' toys. In addition to his two signature weapons, the removable Matrix of Leadership, and the jetpack, Optimus also comes with a hologram readout and wrist comm pieces to attach to the left forearm, with each of those parts featuring two different types of stickers. The articulated hands also feature two additional index fingers, a straight pointing piece, and a slightly curved piece for the Ion Blaster's trigger. A magnetic component in his display stand's faction symbol activates the light-up features that illuminate his eyes and the Matrix. An additional sticker sheet and extra yellow-colored eye parts can be used to create a toy-accurate version of this kit.

:If one chooses, the middle-to-pinky fingers ''can'' be (carefully) sliced into individual pieces as they also feature individual ball joints for each finger.

{{-}}

===Defender Version===
{{Note|Every case before the 5th wave comes with a random Commemorative Card, with 10 Common, 1 Gold, and 1 Silver for each out of every 12 cards.}}
{{anchor|DefenderTruck}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-truck.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Vehicle''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''

:Released as part of the first ''Defender Version'' line of blind boxes, this ''Blokees'' kit of Optimus Prime is molded in his truck mode. The trailer hitch also comes with the Auto-Launcher from the Combat Deck, where it can be extended and wielded by other figures from the same line, allowing them to ride Optimus like an adorable little scooter. The Auto-Launcher can be detached from the bar, allowing the figure to be displayed as a regular-looking truck.

:The Combat Deck/Trailer and the Roller from the 5th wave can accommodate this kit, with the Auto-Launcher able to be mounted inside the trailer.

:This mold was also used to make [[Optimus_Prime_(SG)#SGDefenderVehicle|his Shattered Glass counterpart]].

{{-}}{{anchor|DefenderRobot}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-robot.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:This ''Defender Version'' kit of Optimus Prime is a 2.2-inch (5.5cm) figure, a few inches smaller than the ''Galaxy Version'' kits, but still articulated. Unlike his ''Galaxy Version'' kit, Optimus only comes with an Ion Blaster.

:Like most of the larger Galaxy Version kits, Optimus features a simple neck joint that is colored to match his optics, allowing it to be see-through from his head's eye holes. This mold was also used to make [[Ultra_Magnus_(G1)/merchandise#Defender_Version|Ultra Magnus]] and [[Optimus_Prime_(SG)#Defender_Version|Prime's Shattered Glass counterpart]].

{{-}}{{Anchor|SpecialGalaxyType}}
[[File:Blokees-TF-Defender-Ver-01-Special-Galaxy-Type-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Special Galaxy Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:One of the four chase figures of the line, the "Special Galaxy Type" Optimus Prime is a metallic redeco of the figure above, and he also features additional details to make him more accurate to the show. One chase variant is guaranteed per case, meaning this Optimus appears in five out of every twelve cases.

{{-}}{{Anchor|SpecialArmorType}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-100%-Firepower.jpg|thumb|250px|All of these armaments and yet he insists on crippling the 'Cons' joints without destroying them.]]
<ul class="iconlist">{{Bp-a1|'''Special Armor Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster, Forearm cannon, Wing pack

:The "Special Armor Type" version of the Optimus Prime kit is an alternate version of the Special Galaxy Type chase figure, decked out in metallic paint, and comes with additional armaments such as the forearm cannon and a wing pack that is based on the one used by his ''Cybertron'' namesake. Unlike the chase variant above, this Optimus has an '''''even''''' slimmer pull rate of '''1''' in every 144 boxes, or once per twelve cases.

{{-}}{{anchor|DV05Brilliant}}
[[File:Blokees-TF-DV05-SG-Brilliant-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Brilliant Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 05 - Traitor to Tyranny'''
:*''Accessories'': Energon Axe

:The fifth wave for the Defender Version kit comes with a translucent redeco of Optimus Prime, whose Ion Blaster is replaced with an Energon Axe. Additionally, he comes with one of the three random plastic commemorative coins (featuring etchings of Jetfire's head, Galvatron's head, and Jetfire's vehicle mode) in every case that contains the kit. Each coin is molded from translucent plastic and features a gradient pattern painted with gold.

:As with other clear-colored Brilliant/Glittering kits, the translucent plastic-molded ball-and-socket joints tend to be somewhat loose even when it's built out of the box, compared to the opaque and metallic kits.

{{-}}
===Blokees Wheels===
{{Note| Due to licensing-related reasons, this blind-box line was not released in the US market.}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''

:This 1/64-scale vehicle kit of Optimus Prime's truck mode is part of the new ''Blokees Wheels'' series of blind-boxed ''Transformers'' products. The design is based on Don Figueroa's interpretation of the character's Cybertronian truck mode, as seen in IDW's 2009 -2011 ongoing series. The kit also features PVC tires and an "innovative high-density" ABS material for the car shells. Additionally, Optimus Prime features a universal Chassis Connector, which is used by all vehicle mode kits in the lineup.

:This Optimus Prime has a pull rate of 1/24.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hologram Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with a slim pull rate of 5/144, the "Hologram Edition" Optimus Prime is a translucent redeco of the kit above. It includes an additional translucent blue driver minifigure, which is also designed to fit in the other vehicle kits with open seats.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Titanium Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with the slimmest pull rate of 1/144, the "Titanium Edition" Optimus Prime is a metallic redeco of the original kit, and he comes with the same driver figure form the Hologram Edition release of the kit.

{{--}}

==Combot==
[[File:Unix-Square-Combot-Optimus-Prime.jpg|thumb|300px|Autobots, Transf-I mean, Partsform and roll out!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories:'' 5 pairs of hands, Ion Blaster, Energon Axe, Energon Sword/Blaster Bayonet, Vehicle mode frame

:Produced by [[Unix Square]], a toy company based in Hong Kong, [[Combot]] Optimus Prime is an action figure approximately the size of a Voyager Class figure, and he features an impressive 50 points of articulation and includes a hefty amount of die-cast metal for a weighty premium feel, and light-up features for both the eyes and the Matrix of Leadership. In addition to his iconic Ion Blaster, Optimus also comes with a handheld Energon Axe and a live-action movie-inspired Energon Sword. The sword can also combine with the Ion Blaster to create a Bayonet.

:As the LED unit is wired on the neck, Optimus's head cannot swivel in a full 360 degrees.

:Unlike most non-Hasbro/Takara merchandise of the character on this page, Combot Optimus Prime can transform—albeit loosely defined due to licensing restrictions—into a stylized cab-over using full partsforming, while requiring the included vehicle mode frame.

{{-}}

==Auldey==
{{Note|All releases come with their respective trading cards.}}
[[File:Auldey-TF-AAE-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-001'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Optimus Prime is a 5-inch non-transforming but highly articulated action figure, and he comes with his additional pairs of hands and his signature ion blaster. Prime also features a removable chest window piece, which reveals an empty cavity for a future Matrix of Leadership accessory.

:As advertised in the box, the lineup had an 11/70 probability of getting Prime. This mold was also used to make [[Nemesis Prime (G1)#Auldey|Nemesis Prime]].

{{-}}{{anchor|auldeymetallic}}
[[File:Auldey-TF-AAE-Optimus-Prime-(Metallic).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Metallic Color)''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-000'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:The chase figure of the first lineup with a much slimmer 1/72 probability, this Optimus Prime is a redeco and retool of the figure above, featuring a toy-based deco and parts such as the head and legs. In addition, Prime also comes with a sheet of customer-applied stickers to complete the rest of his toy-accurate details, which include the chrome yellow-gold areas on his front hip.

{{-}}{{anchor|auldeyoptimal}}
[[File:Auldey-TF-AAE-Select-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Optimal Set''' (Alpha Action Elite Select, 2025)}}</ul>
:*''ID Number'': '''AAE-S 001'''
:*''Accessories:'' 16 pairs of hands, Ion Blaster, Energon Axe, Matrix of Leadership, Jet pack (with Blast effects), 2 pairs of alternate communication panels, display stand
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of Auldey's non-blindboxed "''Alpha Action Elite Select (AAE-S)''", a subline that also features re-releases of previous figures with more accessories and premium details, ''AAE-S'' Optimus Prime is a redeco and retool of the original AAE blindboxed figure. Deco-wise, Optimus features metallic paint on the red and blue plastic, along with some metallic silver details. He also comes with additional accessories, such as the Energon Axe, Megatron's pistol form, a jetpack with two Blast effects (also compatible with the Ion Blaster), an additional pair of interchangeable communication panels, and four extra pairs of hands that need trimming from their runners. Additionally, Optimus includes retooled areas and newly molded parts, such as a new neck joint that allows him to look up further, an opening chest window that grants access to his Matrix Chamber, and a display stand with an adjustable posing arm that plugs into multiple holes on his back and the soles of his feet for midair action poses.

:Optimus is also compatible with the Seeker-based back and the head from the same entry's Starscream, recreating the latter's disguise in [[Megatron's Master Plan, Part 1]].

{{--}}

==Ty==
* '''Beanie Bouncer Optimus Prime ''' (2025)
[[File:Bouncer-op.jpg|thumb|200px|If we want to get technical, this is actually [[Diac]].]]

:A bouncing ball covered in fur produced by Ty, creator of the more famous Beanie Babies and Beanie Boos. Optimus Prime's head crests are represented by additoinal pieces of felt material coming out of the ball. Opposite the face is an autobot symbol.

:Opitmus Prime is also available in a three set alongside Megatron and Bumblebee.

{{-}}

==References==
{{reflist}}
{{-}}
[[Category:Attacktix]]
[[Category:Combiners]]
[[Category:Decoys]]
[[Category:Generation 1 Autobots]]
[[Category:MyClone]]
[[Category:Robot Heroes]]
[[Category:Titanium Series]]
[[Category:Bitfig]]
[[Category:ULTIMATES!]]
[[Category:Transformers Character Card Autobots]]

Bumblebee (G1)/merchandise

2025-10-27T17:10:24Z

Leia G: added beanie bouncer bumblebee

{{suite}}

'''Bumblebee''' has a lot of merchandise.

==Happy Meal Toy==
[[File:1985 happymeal bumblebee.jpg|thumb]]
*'''Bumblebee''' (1985)

:Non-poseable, non-transforming figurines of Bumblebee and three of his Mini-Vehicle chums (Cliffjumper, [[Gears (G1)|Gears]], and [[Brawn (G1)/toys|Brawn]]) comprised the very first line of Transformers [[List of Transformers restaurant promotions|Happy Meal toys]], but alas, the figures did not see a full release, and were only test-marketed in St. Louis, Missouri. The two-tone figures were available in a variety of colour variations, with at least six different combinations for each of the four characters: Bumblebee is known to have been available in blue and red, red and black, green and black, blue and black, black and yellow, and black and red... yet not his traditional yellow and black!

::*''[http://tfwiki.net/~fortmax/artifacts/featuredart3.html More information on Happy Meal Bumblebee at the TF Artifacts List]''
{{-}}

==Transformers Milk Caramel==
[[File:Caramel bumblebee.jpg|thumb]]
*'''Bumble''' (1985)
:A soft rubber figurine—known in Japan as a ''keshigomu''— of Bumblebee was released as part of the first wave of [[Kabaya]]'s earliest [[candy toy]] line, ''[[Transformers Milk Caramel]]''. Based more on his toy than his animation model, Bumblebee came packaged with chocolate-covered caramel candies, and was available in various colours, including white, blue, sky blue, yellow, green, and orange.
{{-}}

==Transformers Choco==
*'''Bumble''' (1985)
:A small solid-color, transforming snap-together model kit of Bumblebee was released as part of Kabaya's ''[[Transformers Choco]]'' line of candy toys.
{{-}}

==Estrela==
[[File:Volks-JogoDosTransformers.jpg|thumb|250px]]
*'''Jogo dos Transformers''' (1985)
:A tiny generic yellow car representing "Volks" (Bumblebee per his original toy name in Brazil) was included as a pawn in [[Estrela]]'s ''[[Jogo dos Transformers]]'' board game. He is not directly named, simply being called the "carrinho amarelo" (little yellow car) in the game's instructions, but his identity is revealed as a pair of cards featuring art of his original toy in vehicle mode are also included. He comes with a small sticker that's placed on the bottom of the car representing his robot mode, thus allowing him to roughly "transform" by being placed vertically - a little bit like what [[Robot Powered Machines]] would do about a pair of decades later.

:This same car was recolored to represent [[Windcharger (G1)#Estrela|Camaro (AKA Windcharger)]], [[Cliffjumper (G1)/toys#Estrela|Carrera (AKA Cliffjumper)]], and [[Sedan (Robocar)|Sedan]] in the same board game.
{{-}}

==Decoy==
[[File:Decoy bumblebee.jpg|thumb|Fun fact, this was the last piece of Bumblebee merchandise we'd get up until the next decade and a half. Things sure changed...]]
*'''Cybertron Hero Collection 9''' (multi-pack, 1986)
*'''Defeat Dinosaurer Strategy Game''' (board game, 1986)
:Bumblebee was among the many characters rendered by [[TakaraTomy|Takara]] as part of their series of 1.5" ''keshigomu'' figurines. Like all the Autobots in the series, Bumblebee was molded in soft red rubber, and featured a number sculpted into his back that was the sum total of his [[Tech Spec]]s, for use in the various games that could be played with the figurines. Bumblebee was available as part of a nine-piece box set of Autobot figures, as a playing piece in the Defeat Dinosauruer Strategy Game and later, in a peach coloration randomly packed as part of various other box sets.

*'''Bumblebee''' (1987)
**''Decoy number:'' '''26'''

:The Bumblebee figurine was later brought over to [[Hasbro]] markets as part of the [[Decoy]] promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (26, in Bumblebee's case). Like all Autobot Decoys, he was a randomly-chosen pack-in available with the carded [[Throttlebot]]s, [[Aerialbot (G1)|Aerialbots]], [[Protectobot (G1)|Protectobots]] and [[Technobot (G1)|Technobots]].

::*''[http://www.tfu.info/1986/Autobot/Decoys/Bumblebee/bumblebee.htm More information on Decoy Bumblebee at TFU.info]''
{{-}}

==Super Collection Figure==
[[File:SCF Bumblebee.jpg|upright=1.66|thumb|"ACT NATURAL."]]
*'''Bumble''' (2001)
**''Act'': '''3'''
**''Accessories'': Stand

:A 2-inch PVC of Bumblebee with his best human friend [[Spike Witwicky (G1)#Super Collection Figure|Spike]] was released in the third "Act" of [[TakaraTomy|Takara]]'s ''[[Heroes of Cybertron (toyline)|Super Collection Figure]]'' series. He carries the tiny little pistol he had in the opening of "[[More than Meets the Eye, Part 1]]". The figure was available in both full color and clear plastic versions, one of each available in a standard case of twelve [[blindpacking|blindpacked]] figures.

: In two out of every ten cases, the color version of Bumblebee came packaged with the torso of the Act's collectible "build-a-figure" [[Fortress Maximus (G1)#Super Collection Figure|Fortress Maximus]]. This part could also be either full-color or clear-plastic, packed at an equal 1:1 ratio.

: In one out of every ten cases (that didn't have a Fortress Maximus part), the clear version of Bumblebee was replaced with the [[Optimus Prime (G1)/merchandise#SCFdamage|battle-damaged Optimus Prime]] "[[chase figure|Secret Figure]]".

::*''[http://tfu.info/2001/Cybertron/SCFBumble/bumble.htm More information on Super Collection Figure Bumble at TFU.info]''
::*''[http://tfu.info/2001/Cybertron/ClearBumble/bumble.htm More information on clear Super Collection Figure Bumble at TFU.info]''

{{-}}

==''Heroes of Cybertron''==
[[File:HOC Bumblebee.jpg|upright=1.66|thumb|Both of Spike's thumbs got stung by bees before the photo was taken.]]
*'''Autobot Espionage Team''' (2003)

:The Bumblebee and Spike figurines were later sold in the fourth wave of [[Hasbro]]'s ''[[Heroes of Cybertron (toyline)|Heroes of Cybertron]]'' line, but since Hasbro didn't have the [[trademark]] on Bumblebee's name at the time, the set was simply collectively named the "Autobot Espionage Team". This version of the duo was cast in clear-blue plastic then painted over, with Bumblebee's eyes and the back of his head unpainted to attempt a [[light-piping]] gimmick.

: The pair were sold on a blister card, packaged with a character card and the right leg of the wave's collectible [[Fortress Maximus (G1)#Heroes of Cybertron|Fortress Maximus]] "build-a-figure".

::*''[http://tfu.info/2002/Autobot/HoCBumblebee/bumblebee.htm More information on Heroes of Cybertron Bumblebee at TFU.info]''
{{-}}

==''MyClone''==
[[File:MyClone Bumblebee.jpg|thumb|Oh wow they managed to let the kid friendly character look like a fat, grumpy old man.]]
*'''Bumble''' (2003)
** ''Japanese ID number:'' '''MTF010'''
** ''Accessories:'' Yellow display stand
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

:Released in the second wave of the ''[[MyClone]]'' line of Transformers PVC figures, this [[super deformed]] Bumblebee comes with a hexagonal yellow display stand, which can link up with the identical stands included with other MyClone figures. His modular design allows his parts to be mixed and matched with those of any other MyClone figure.
{{-}}

==''Q-Robo Collection''==
[[File:Qrobo bumblebee.jpg|thumb]]
*'''Bumble''' (2003)

:A super-deformed PVC of Bumblebee was released as part of the''[[Q-Robo Collection Figure]]''. Like all the figures in the series, it was sold blindpacked in a plastic capsule, featured articulation in the neck and shoulders, and was also available in a translucent red color scheme.

::*''[http://snakas.web.fc2.com/figure/q_robo1.htm More information on the Q-Robo Collection at Autobase Aichi]''
{{-}}

==Generation 1 Figure-Collection==
[[File:Bottlecap bumblebee.JPG|thumb]]

*'''Bumble''' (2003)
**''Japanese ID number:'' '''C-4'''
**''Accessories:'' Display base

:At only one inch in height, this Bumblebee "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's Transformers [[Generation 1 Figure-Collection]]. The figure was rendered in a "retro" black and white color scheme, and came with a leaflet, personalized with cartoon screen captures.
::*''[http://snakas.web.fc2.com/misc_item/kabaya_bottle.htm More information on the Generation 1 collection at Autobase Aichi]''
{{-}}

==History Collection==
[[File:History collection bbee.jpg|thumb]]

*'''Bumble''' (2004)
**''Accessories:'' Display base

:Takara produced this PVC figurine of Bumblebee as part of their [[History Collection]] set. Despite its diminutive size, this two-piece full-color figure features articulated shoulders.

::*''[http://tfkenkon.com/collection/act234/ More information on the History Collection at TFKenkon.com]''
{{-}}

==Hard Hero==
[[File:Hardhero bumblebees.jpg|thumb|upright=1.67]]
*'''Bumblebee''' (mini-statue, 2004)

:Standing at seven inches tall, [[Hard Hero]]'s Bumblebee cold cast porcelain mini-statue was limited to 1500 pieces and could link up with the company's previous [[Optimus Prime (G1)/merchandise|Optimus Prime statue]] to form a small diorama. Notionally, he was supposed to be the "first in the Minibot series", though no more Minibot statues were produced.

*'''Bumblebee''' (metallic chrome exclusive, 2004)

:A metallic golden chrome version of Hard Hero's Bumblebee statue, in homage to the original toy's Generation 2 chrome redeco, was offered as an exclusive by Coalition Comics in December 2004, limited to only 250 pieces.
{{-}}

==Gummy Candy==
[[File:ClassicsGummies.jpg|thumb|He's Bumblelicious!]]
*'''Transformers Gummy Candy''' (2006)

:Large [[Gummy Candy|gummy candies]] resembling his ''Classics'' toy packaged in a blister bubble.
{{-}}

==''Titanium Series''==
[[File:TitaniumRM-Bumblebee.jpg|thumb|22 years and five Robot Points later, he finally gets a gun. Revenge time!]]
*'''Bumblebee''' (Robot Master, 2006)
**''Accessories:'' Gun, display stand

:''[[Titanium Series]]'' Bumblebee is a small, 3-inch mostly-die-cast-metal statue of the little guy in a design that's surprisingly close to the original toy, with two wheels on each arm, a plate behind his head and sculpted details on his legs that are also based on the original toy. The only part where the cartoon model is given a preference is the head, including the face.

:''Titanium'' Bumblebee has joints at the waist, neck and shoulders, plus a removable pistol. He even comes with a little Autobot-sigil display base.

:This sculpt would've been used to make [[Cliffjumper (G1)/toys|Cliffjumper]], but the ''Titanium'' line was canceled before that figure could be released.

::*''[http://tfu.info/2006/Autobot/TitBumblebee/bumblebee.htm More information on Titanium Bumblebee at TFU.info]''
{{-}}
{{anchor|Ti2pack}}
[[File:Titanium-Series-Optimus-Prime-and-Bumblebee-2pack.jpg|upright=1.11|thumb|"Umm...He did it!" "What?"]]
*'''Optimus Prime & Bumblebee''' (2-pack, 2007)
**''Accessories:'' Gun, display stand

:A Toys 'R' Us [[exclusive]] two-pack, this set features "Supermetal Finish" (read: shiny) versions of the "Robot Master" ''Titaniums'' Optimus Prime and Bumblebee.
{{-}}

==Palisades==
[[File:Palisades bumblebee.jpg|thumb]]
*'''Bumblebee''' (mini-statue, 2006)

:Initially intended to be an exclusive for [[BotCon 2005]], [[Palisades Toys]]' 4" Bumblebee mini-statue fell victim to a scheduling conflict and was instead released by NonStop Toys in 2006, with leftover stock also being allocated to Diamond Previews in some countries. This stock tended to have a cracked crotch, a common defect with this piece. One of the last four statues to come out of the Palisades Transformers range, Bumblebee was limited to 1000 pieces.
{{-}}

==Diamond Select==
[[File:Art asylum bumblebees.jpg|thumb|upright=1.67]]
*'''Bumblebee''' (statue, 2007)

:This six-inch tall mini-bust of Bumblebee was sculpted by [[Art Asylum]] and limited to 1000 pieces.

*'''Bumblebee Roto-Bank''' (money bank, 2009)

:Art Asylum also produced a Bumblebee money bank, equipped with poseable, rotating arms and head.
{{-}}

==''Robot Heroes''==
[[File:G1 RobotHeroes BumblebeeVsSoundwave.jpg|upright=1.66|thumb|I wiw punch Soundwave into obwivion.]]
*'''Bumblebee & Soundwave''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

:''[[Robot Heroes (toyline)|Robot Heroes]]'' Bumblebee is another piece of absolute adorableness. A soft-plastic figurine that combines the cartoon and toy elements of the original Bumblebee with a "super-deformed" style, he is jointed at the neck and shoulders. He came in a two-pack with [[Soundwave (G1)/merchandise#Robot Heroes|Soundwave]].

:This mold was also used to make ''Robot Heroes'' [[Cliffjumper (G1)/toys#Robot Heroes|Cliffjumper]], of course.

::*''[http://tfu.info/2007/Autobot/RHBumblebee/bumblebee.htm More information on Robot Heroes Bumblebee at TFU.info]''

{{anchor|RHBlindpack}}
*'''Bumblebee''' (Single-pack, 2008)

: In some countries outside of North America, Bumblebee was released individually in a blindpack with no notable changes.
{{--}}

==''Transformers'' (2007)==
[[File:Mov2007-toy Slumblebee.JPG|upright=1.66|thumb]]
*'''Slumblebee''' (2007)

:Slumblebee is, as his name suggests, a plush Bumblebee toy based on his original [[The Transformers (franchise)|Generation 1]] form. Obviously he has no problems with articulation and passes the drop test with flying colors. You can transform him into his car mode (which is totally '''''not''''' a Beetle, as far as Volkswagen can prove) by turning him inside out. Truly he is a new zenith of cuteness.

::*''[http://tfu.info/2007/Autobot/Slumblebee/bumblebee.htm More information on Slumblebee at TFU.info]''
{{-}}

==3D Battle-Card Game==
[[File:3DBattleCard ClassicBumblebee.jpg|thumb|upright=1.66]]
*'''Classic Bumblebee''' (2007)

:A 22-point character in the [[3D Battle-Card Game]]'s "Energon Wars" expansion, "Classic" Bumblebee "transforms" into a yellow sports coupe, based on his ''Classics'' design. He uses the same parts layout as [[Side Swipe (Armada)|Side Swipe]] and [[Blackjack (G1)|Blackjack]].
{{-}}

==Sota Toys==
*'''Transformers Chess Set''' (<s>2007</s>)
:Eight identical Bumblebee pieces were to be the Autobot-side Pawns on a [[Chess#Sota Toys|chess set]] based on Generation 1, but the set apparently never saw release.
{{canceledtoy}}
{{-}}

==Boss Coffee==
[[File:Boss coffee bumblebee.jpg|thumb]]
*'''Bumble''' (2008)

:A non-transforming PVC figure of Bumblebee was released as part of a promotion by [[Boss Coffee]]. The small figure was randomly included with single cans of the company's "Rainbow Mountain Blend" coffee, contained in a plastic capsule affixed to the top of can which then became a display base for the figurine once removed. Bumblebee features articulation at the shoulders and waist, and came with a small catalog leaflet that could be folded up and attached to the lid/base to form a diorama background for added display value.
{{-}}

==''Attacktix''==
[[File:AttacktixBumblebee.jpg|thumb|Well, if people are gonna keep drawing him carrying gigantic guns....]]
*'''Bumblebee''' (Booster, 200?)
**''Attacktix ID number'': '''TF06'''

:Part of the second-series ''Transformers [[Attacktix]]'' Boosters, Bumblebee is a "Rare" 10-point "Specialist" that fires a standard missile. His Special Power, "Infiltrate" allows Bumblebee, after being defeated and turning up white, to be placed anywhere on the opponents starting line. He also has an always-active power that lets him take a free turn if he defeats another "Specialist"-ranked piece with a higher point value than his own. Holy schneikies, he's a ''monster'' on the board.

{{canceledattacktix}}
{{-}}

==''Universe'' (2008)==
[[File:TFU08-toy BumblebeeSuperSoaker.jpg|thumb|Electric charger not included!]]
*'''Bumblebee Super Soaker''' (2009)

:The Bumblebee {{w|Super Soaker}} is a yellow and black redeco of Hasbro's earlier "Sneak Attack 4-Way" water gun. The gun has several nozzle settings that allow it to fire a stream or fan of water straight forward, or streams in four other directions to surprise people and "soak 'em sideways".
{{-}}

==''Mighty Muggs''==
[[File:MightyMuggs Bumblebee.jpg|thumb|Tubby lil' muggy all stuffed with <s>fluff</s> energon.]]
*'''Bumblebee''' (2009)

:[[Mighty Muggs]] Bumblebee is a [[Super deformed|super-deformed]], non-transformable PVC figure with swiveling arms and head. His mold is different from the standard template used by most ''Transformers'' Muggs, as it is extra short and has Bumblebee's trademark "horns". On the other hand, he doesn't come with any weapons.
{{-}}

{{anchor|2018mightymugg}}
[[File:MightyMuggs 2018 Bumblebee.jpg|thumb|upright=1.44|Smug little bug.]]
*'''Bumblebee''' ([[2018]])
**''ID number:'' '''03'''

: Heavily influenced by his [[evergreen]] design, this Bumblebee Mugg is part of the line's relaunch in 2018. This new mold features sculpted wings, and a unique helmet that changes Bee's expression when pressed. He has three different faces: smug, surprised, and silly.
{{-}}

==''Transformers Wacky Wobblers''==
[[File:WackyWobblers G1Bumblebee.jpg|thumb]]
*'''Bumblebee''' (2009)

:This Bumblebee {{w|bobblehead}} is part of the popular ''[[Wacky Wobblers]]'' line produced by {{w|Funko}}. Aside from the standard-issue big wobbling head, he also features arms that swivel at the shoulders. Bumblebee is affixed to a base with his name on it.
{{-}}

==Transformers x Mimobot==
[[File:Mimobot Bumblebee.jpg|thumb|upright=1.66]]
*'''Bumblebee Mimobot''' (Mimoco, 2012)
:Produced by [[Mimoco]] as part of their multi-brand line of designer USB "Mimobot" flash drives, this Bumblebee memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.
{{-}}

==''The Loyal Subjects''==
*'''Bumblebee''' (2013)
{{charstubtoys}}
{{anchor|The Loyal Subjects Cybertron}}
*'''Cybertron Bumblebee''' (2013)
{{charstubtoys}}
{{-}}

==''Thrilling 30''==
*'''Bumblebee''' (Collectible Figurine, 2014)
**''Series / Number:'' '''2 / #16'''
**''Accessories:'' Collector's base
:A super-deformed Bumblebee was released among the blindpacked [[Thrilling 30#Collectible Figurines|''Thrilling 30'' Collectible Figurines]] by [[Goldie Marketing]]. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

*'''Collectible Figurines''' (5-pack, 2014)
**''Series:'' '''2'''
**''Accessories:'' 5 collector's bases
:The same Bumblebee figurine was also available in a 5-pack alongside [[Shockwave (G1)/toys#Thrilling 30|Shockwave]], [[Ultra Magnus (G1)/merchandise#Thrilling 30|Ultra Magnus]], [[Grimlock (G1)/toys#Thrilling 30|Grimlock]] and [[Hot Rod (G1)/merchandise#Thrilling 30|Rodimus]].
{{-}}

==Leg Avenue==
{{anchor|LegAvenue}}
[[File:Leg_Avenue_Bumblebee.jpg|right|upright=.75|thumb|]]
:Costume and lingerie manufacturer Leg Avenue released an officially licenced Bumblebee costume along side ones for [Megatron (G1)/merchandise#LegAvenue|Megatron]] and [[Optimus Prime (G1)/merchandise#LegAvenue|Optimus Prime]].
{{-}}
==''Tiny Titans''==
[[File:TinyTitans_G1Bumblebee.jpg|thumb|]]
*'''Bumblebee''' (Tiny Titans, 2015)
**''Series'': '''2'''
**''Number'': '''11/12'''

: Part of the second assortment of ''[[Tiny Titans]]'' [[blindpacking|blindpacks]], this version of Bumblebee is a very small, soft-plastic figure of him in robot mode... cast in gray plastic with copious amounts of golden-yellow paint on him, more than most Tiny Titans get.

: He includes a collectible card that renders him in the [[Transformers: Robots in Disguise (2015 franchise)|2015 ''Robots in Disguise'']] styling. The card includes a scan-badge for the [[Transformers: Robots in Disguise (mobile game)|''Robots in Disguise'' mobile game]], which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.

: This wave saw fairly minimal release at "big box" retailers, but unlike other waves, was ''not'' picked up by drug stores and the like later, making them particularly hard to find.

{{-}}

{{-}}

==''Hikari Mark Sofubi''==
[[File:HikariMarkSofubi Bumbles.jpg|thumb|]]

Drawing from a number of franchises including Star Wars, Marvel and Godzilla, Funko released a line of 6.6 inch/17 centimetre tall deformed soft vinyl figures with limited articulation. Hikari, meaning ‘light’, came in a variety of colors and included a hand-numbered card of authenticity. Individual pieces ranged from 500 to 5000, depending on the character and variation. Eight versions of Bumblebee were released in 2014:

*'''Battle Ready Bumblebee''' (2014)
:A yellow distressed rendering of Bumblebee in the Sunbow-style, limited to 1000.

*'''Clear Glitter Bumblebee''' (2014)
:A yellow and black translucent rendering of Bumblebee in the Sunbow-style, limited to 3000.

*'''Dangerous Bumblebee''' (2014)
:A black with grey streaks rendering of Bumblebee in the Sunbow-style, limited to 600.

*'''Distressed Bumblebee''' (2014)
:A lighter yellow distressed rendering of Bumblebee in the Sunbow-style, limited to 1000.

*'''Grey Skull Bumblebee''' (2014)
:A black and white rendering of Bumblebee in the Sunbow-style, limited to 1000.

*'''Ice Bumblebee''' (2014)
:A blue and white two-tone translucent rendering of Bumblebee in the Sunbow-style, limited to 1000.

*'''Metallic Bumblebee''' (2014)
:A metallic yellow and black rendering of Bumblebee in the Sunbow-style, limited to 1000.

*'''24K Gold Bumblebee''' (2014)
:An all-gold rendering of Bumblebee in the Sunbow-style, limited to 600.

{{-}}

==''Mecha Nations''==
[[File:Mn07-bumblebee.jpg|thumb|150px]]
*'''Bumblebee''' (2015)
**''ID Number:'' '''MN07'''
**''Accessories:'' Alternate hands, gun, battle-damaged armor (left arm, chest, right foot, face).

:Created by [[Kids Logic]], this [[super deformed]] Bumblebee, with G1 "Beetle"-style appearance, stands 6" tall and is articulated, featuring a shiny metallic color scheme, replacement hands, LED light up eyes, weapon and Autobot insignias on his chest. He also includes alternate parts for his chest, right foot and a mangled left arm for that [[Transformers (film)|movie-inspired]] battle-damaged look. Bumblebee's deco, with more black than traditionally found on G1 Bumblebee, and included weapon also appear to draw from his [[Bumblebee (Movie)|live-action counterpart]].

{{-}}

==''Metal Earth''==
[[File:Metal Earth Bumblebee.jpg|thumb]]
*'''Bumblebee''' (2015)
**''ID number:'' '''MMS301'''
:''[[Metal Earth]]'' Bumblebee is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".
{{-}}

[[File:Metal Earth Gold Bumblebee.jpg|thumb]]
*'''Gold Bumblebee''' (2015?)
**''ID number:'' '''MMS301G'''
:''Metal Earth'' Gold Bumblebee is a redeco of the kit above. He most likely represents Goldbug, though he is not named as such.
{{-}}

[[File:Metal Earth Legends Bumblebee.jpg|thumb]]
*'''Bumblebee''' (Legends, 2019)
**''ID number:'' '''MEM052'''
:''Metal Earth Legends'' Bumblebee is a DIY 3D steel model kit in the shape of a super deformed version of the evergreen Bumblebee design. The kit's difficulty rating is given as "moderate".
{{-}}

==''Block Wars''==
*'''Bumblebee''' (2016)
**''Number:'' '''2'''

:Part of [[Kabaya]]'s ''[[Transformers Block Wars]]'' candy toy line, this Bumblebee kit is based on his [[Bumblebee (G1)/toys#Cyber Series|Cyber Series Commander toy]]. Molded entirely in yellow plastic with detailing from stickers, he transforms into a super car when finished and is armed with a large sword with interchangeable handles. He can also be taken apart and combined with ''Block Wars'' [[Optimus Prime (G1)/merchandise#Block Wars|Optimus Prime]], [[Megatron (G1)/merchandise#Block Wars|Megatron]] and [[Starscream (G1)/toys#Block Wars|Starscream]] in various configurations, the ones involving Bumblebee shown on the packaging being:

:*Giving Bumblebee Megatron's arms and Starscream's wings and arming him with Optimus Prime's spear.
:*Attaching Starscream's wings and Megatron's cannon to Bumblebee's vehicle mode, making him a flying death car.
:*Having Starscream wield Bumblebee's sword and use his car roof as a shield.
:*Combining all four into an unnamed combiner, with Bumblebee forming the arms.

{{-}}

==''Transformers Figure Collection''==
[[File:TF-Transformers-Figure-Collection-Bumblebee-Decoy.jpg|thumb]]
*'''Bumble''' (01–2016)

:Standing 42mm tall, ''Transformers Figure Collection'' Bumble is a non-poseable soft-rubber figure greatly based on a [[Decoy]] figure.
{{-}}

==My Busy Books==
[[File:TF-My-Busy-Books-Transformers-Bumblebee-figurine.jpg|upright=1.66|thumb]]
*'''Transformers: My Busy Book''' (2017)

:Available with the [[Transformers: My Busy Book|10-page board book]] and a box filled with 12 figurines & a playmat depicting a destructed city & Cybertron, this Bumblebee is a pair of small, PVC non-transforming figurines consists of his robot mode (in his evergreen design) and his yellow car alternate mode that is inspired by his [[Bumblebee (Movie)|live-action film counterpart]]'s Camaro Concept vehicle. Like most of the land-based vehicle figurines, his wheels do not roll.

:In terms of quality control, the figurines' paint applications can be...well, a ''wee bit but not almost entirely'' shoddy (notably the wheels, as seen in the photo on the right). If you're a collector who prefers to display them, you should resign yourself from buying it or try to [[customizing|customize]] the figures with better paint applications if you have the skills.

{{-}}

==Kidrobot==
[[File:Kidrobot GIJoe Enamel Pin Series.jpg|thumb|250px]]
===Enamel Pin Series===
*'''Bumblebee''' ([[November 3]], [[2017]])
:*''Rarity:'' 2 in 20
:Released by [[Kidrobot]] in their Enamel Pin Series, this is a flat, enamel pin badge of Bumblebee inspired by the art of [[Tom Scioli]]'s ''[[Transformers vs. G.I. Joe]]'', albeit with [[Super deformed|cutesy proportions]]. The pin series was [[Blindpacking|blindboxed]], with some pins being rarer than others.
{{--}}

===Vinyl Mini Series===
[[File:Kidrobot GI Joe Bumblebee mini.jpg|thumb|upright=1]]
*'''Bumblebee''' ([[November 14]], [[2017]])
:*''Rarity:'' 3 in 48
:The same character design was reused for the Vinyl Mini Series, with Bumblebee receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. He featured articulation in each shoulder.
{{--}}

===Vinyl Keychain Series===
[[File:Kidrobot GI Joe Bumblebee keychain.jpg|thumb|upright=1]]
*'''Bumblebee''' ([[December 1]], [[2017]])
:*''Rarity:'' 3 in 24
:Bumblebee was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation.
{{--}}

==Hauck==
[[File:Hauck Go Kart Bee.jpg|upright=1.66|thumb|In case a VW Beetle was too big for you.]]
*'''Bumblebee Go Kart''' (2017)
:Manufactured by [[Hauck toys]], the Bumblebee go-kart is a small, pedal-operated vehicle for kids aged 4-8 years old. Cast in the image of Bumblebee (even featuring his head sculpted on the front), the kart features an adjustable seat as well as a brake.

{{-}}

==Fidget Its==
[[File:Fidget its bumblebee.jpg|upright=1.66|thumb|The [[AllSpark|cube]] was merely a vessel; its power, its knowledge—can never be destroyed.]]
*'''Bumblebee''' (2017)

:Arriving a little late to the fidget toy craze, [[Fidget Its]] Bumblebee is a cube-shaped Bumblebee with rubber horns and (non-poseable) feet. He has five features to fidget with: button eyes, a larger and clickier button, a slidable "arm", a clicky dial, and a pressable rolling metal ball on his back.
{{-}}

==Bouncing Ball Heads==
[[File:BouncingBallHead Bumblebee.jpg|upright=1.22|thumb]]
*'''Bumblebee''' (2017)
:"Bouncing Ball Head" Bumblebee is a small, super deformed figurine with a removable head that doubles as a bouncy ball. An Autobot logo is tampographed on the back of his head and his name is written under his feet.

:He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique yellow color.

:Despite clearly representing Generation 1 characters, the collection is advertised as a 2015 ''[[Transformers: Robots in Disguise (2015 franchise)|Robots in Disguise]]'' product.
{{-}}

==''Playskool Friends''==
[[File:Playskool-Friends-TF-Bumblebee.jpg|upright=1.88|thumb]]
*'''Transformers Collector Pack''' (Canceled)

:Intended to be released as part of the 7-pack for the Playskool Friends lineup, this Bumblebee is a very adorable non-transforming figurine. He comes packed with Optimus Prime, Arcee, and 4 Rescue Bots: Heatwave, Chase, Boulder and Blades.

:Given the inclusion of the four Rescue Bots, it was ''probably'' unclear if this Bumblebee is mean to represent his ''Generation 1'' counterpart or his ''[[Bumblebee (WFC)|Aligned]]'' counterpart.
{{canceledtoy}}
{{-}}
==Forever Clever==
{{anchor|Jumbochalk}}
*'''4 Pack Jumbo Chalk Set''' (2018)
:A chalk holder featuring Bumblebee. Bundled with chalk holders of [[Megatron (G1)/merchandise#Jumbochalk|Megatron]], [[Optimus Prime (G1)/merchandise#Jumbochalk|Optimus Prime]] and [[Soundwave (G1)/merchandise#Jumbochalk|Soundwave]], and 4 pieces of appropriately colored chalk.
{{anchor|shapechalk}}
*'''5 Pack Shaped Chalk''' (2019)
:A piece of yellow chalk formed into the shape of Bumblebee. Bundled with [[Megatron (G1)/merchandise#shapechalk|Megatron]], [[Optimus Prime (G1)/merchandise#shapechalk|Optimus Prime]], [[Starscream (G1)/merchandise#shapechalk|Starscream]] and [[Windblade (G1)#shapechalk|Windblade]].
{{anchor|WallWalker}}
*'''Wall Walkers Bumblebee''' (2018)
:Exclusively released in [[Blindpacking|blind bags]] by [[Forever Clever]], ''Wall Walkers'' Bumblebee has suction cups on its hands and feet so it can stick to walls. All its details are printed on, and besides its colors and printing, it is identical to the other Wall Walkers toys.
{{anchor|MiniWalker}}
[[File:MysteryMiniWalkers.jpg|upright=1|thumb]]
*'''Mystery Mini Walkers Bumblebee''' (2021)
:Exclusively available in blind bags, ''Mystery Mini Walkers'' Bumblebee is an eraser-like figure with movable arms and legs and printed-on details.
{{-}}
{{anchor|PBRbumblebee}}
[[File:TF Authentics 2023 Pull-Back Racers Bumblebee.jpg|upright=1|thumb|Dap me up, Prime!]]
*'''Pull-Back Racers Bumblebee''' ([[2023]])
:Released in the ''Pull-Back Racers'' subline of ''Authentics'', this toy is a non-transforming rendition of Bumblebee in a super-deformed rendition of his vehicle mode, albeit with his robot mode head and left arm sticking out of it. As the title suggests, this toy has a pull-back motor that will propel the toy forwards after being pulled back considerably enough.
{{-}}
{{anchor|ClipCharms}}
[[File:ForeverCleverClipCharms.jpg|upright=1|thumb]]
*'''Clip Charms Bumblebee''' (2024)
:Released in blind bags, ''Clip Charms'' features a keychain design with half of Bumblebee's face, with his name written beside it.
{{-}}
{{anchor|KeyBlasters}}
*'''Key Blasters''' (2024)
:A toy car released as part of the ''Key Blasters'' series features Bumblebee on its sides and hood, with a hexagon design. A key is included. When it is inserted into the car, pushing the button on the key will propel the car forward. It was sold in a two-pack with a [[Soundwave (G1)/merchandise#KeyBlasters|Soundwave]] themed car.

===Squeezelings===
[[File:Series1SqueezelingsBumblebee.jpg|thumb]]
*'''Bumblebee''' (Series 1, 2022)
:''[[Squeezelings]]'' Bumblebee is a [[super deformed]], non-posable figure made of soft plastic and holding a blaster, released by [[Forever Clever]]. He was released in [[blindpacking|blind bags]] and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

{{-}}{{anchor|SqueezelingsBlackout}}
*'''Blackout Color Mode Bumblebee''' (2022)
:A [[black redeco]] of the previous Bumblebee figure, resembling the many Stealth Bumblebee redecos his [[Bumblebee (Movie)/toys|movie self]] has received over the years. It was exclusive to an 8-figure gift set, featuring [[Optimus Prime (G1)/merchandise#Squeezelings|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings|Bumblebee]], [[Starscream (G1)/merchandise#Squeezelings|Starscream]], [[Megatron (G1)/merchandise#Squeezelings|Megatron]], and Blackout Color Mode versions of the three other characters.

{{-}}{{anchor|Squeezelings2}}
*'''Bumblebee''' (Series 2, 2023)

:A figure of Bumblebee in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongside [[Optimus Prime (G1)/merchandise#Squeezelings2|Optimus Prime]], [[Megatron (G1)/merchandise#Squeezelings2|Megatron]] and [[Optimus Primal (BW)/toys#Squeezelings|Optimus Primal]], in blind bags, or on blister card individually. It was rereleased as part of the Squeezelings Sidekicks line, along with a copy of [[The Hanging Sword]], the first issue of the [[The Transformers: Bumblebee]] miniseries.

==''Uglydolls''==
[[File:Uglydolls plush collab.jpg|upright=1.66|thumb]]
*'''Ice-Bat as Bumblebee''' (2018)
:A collaboration with ''[[Uglydolls]]'' for the 2018 [[San Diego Comic-Con]], the character Ice-Bat is dressed as Bumblebee. He is a limited run exclusive plush, along with Ox as [[Optimus Prime (G1)/merchandise|Optimus Prime]].

{{-}}

==''Keshi Surprise''==
*'''Autobots''' (2018)

:The ''[[Keshi Surprise]]'' series by [[Super7]] consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980s [[Decoy]]s. These [[Blindpacking|blind-packed]] figures were sold individually or in cases depicting only their faction. Bumblebee was available in red, yellow, blue, and purple, and included a foil trading card / sticker.
{{-}}

==McDonald's==
[[File:2018-McD-Authentics-Bumblebee-Robot.jpg|upright=1.22|thumb]]
*'''Bumblebee''' (Happy Meal Toy, 2018)
:Released as part of the [[McDonald's]] June 2018 Happy Meal Toys along with [[My Little Pony]], McDonald's Bumblebee is a [[super deformed]], non-poseable toy, except at the right arm, which is a little missile launcher. It's pretty big. That's it.

:The toy was available in South Korea, Italy, Russia, and Malaysia. This toy was rereleased in the US as [[Bumblebee (Movie)/merchandise#McDonald's 2|Bumblebee]] for the ''[[Bumblebee (franchise)|Bumblebee]]'' promotion.

{{-}}{{anchor|McDonaldsCar}}
[[File:2018-McD-Authentics-Bumblebee-Racer.jpg|upright=1.22|thumb]]
*'''Bumblebee Racer''' (Happy Meal Toy, 2018)
:Part of the same Happy Meal collection as the toy above, this toy represents Bumblebee in his car mode with a pull-back motor. It was also rereleased as [[Bumblebee (Movie)/merchandise#McDonaldsCar|Bumblebee Racer]] for the ''Bumblebee'' promotion.

{{-}}

==''Transformers Trading Card Game''==
[[File:W1BumblebeeBW.jpg|thumb|upright=1.66]]
*'''Bumblebee, Brave Warrior''' (2018)
**'''Wave 1S: Starter Set'''
**''Rarity: '''''RT'''
**''Card Number:''''' T01/T04'''
**''Stars: ''6
:Bumblebee, Brave Warrior is one of four double-sided character cards available in the ''[[Transformers Trading Card Game]]'' Starter Set.

:The artwork for the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile game, and is based on the '''Legacy of Bumblebee''' redeco of the ''[[Transformers: Classics|Classics]]'' Bumblebee toy.
{{-}}
[[File:BumblebeeCS.jpg|thumb|upright=1.66]]
*'''Bumblebee, Courageous Scout''' (2018)
**'''Wave 1'''
**''Rarity:'' '''CT'''
**''Card Number:''''' T08/T40'''
**''Stars: ''9
:Bumblebee, Courageous Scout is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The artwork for the card reuses different artwork from the ''Transformers Legends'' mobile game, and is based on the '''Legacy of Bumblebee''' redeco of the ''Classics'' Bumblebee toy.
{{-}}
[[File:W1BumblebeeLW.jpg|thumb|upright=1.66]]
*'''Bumblebee, Legendary Warrior''' (2018)
**'''Wave 1'''
**''Rarity:'' '''SRT'''
**''Card Number:''''' T09/T40'''
**''Stars: ''10
:Bumblebee, Legendary Warrior is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The artwork for the card reuses more artwork from the ''Transformers Legends'' mobile game, and is based on the '''Legacy of Bumblebee''' redeco of the ''Classics'' Bumblebee toy.
{{-}}
[[File:W2Bumblebee.jpg|thumb|upright=1.66]]
*'''Bumblebee, Trusted Lieutenant''' (2019)
**'''Wave 2: Rise of the Combiners'''
**''Rarity: '''''CT'''
**''Card Number: '''''T14/T46'''
**''Stars: ''10

:Bumblebee, Trusted Lieutenant is one of forty-six character cards released in Wave 2 of the ''[[Transformers Trading Card Game]]'', Rise of the Combiners.

:The artwork for the card features another set of reused artwork from the ''Transformers Legends'' mobile game, and is once again based on the '''Legacy of Bumblebee''' redeco of the ''Classics'' Bumblebee toy.
{{-}}
[[File:W2SBumblebeeLLMD.jpg|thumb|upright=1.66]]
*'''Bumblebee, Least Likely, Most Dangerous''' (2019)
**'''Wave 2S: Bumblebee vs. Megatron Starter Set'''
**''Rarity: '''''RT'''
**''Card Number: '''''T01/T04'''
**''Stars: ''7

:Bumblebee, Least Likely, Most Dangerous was released as part of the ''Transformers Trading Card Game's'' Bumblebee vs. Megatron Starter Set. The card was packaged alongside [[Megatron (G1)|Megatron]], Cybertronian Tyrant, [[Starscream (G1)|Starscream]], Decepticon Lieutenant, [[Windblade (G1)|Windblade]], Defender of Truth, and a 40 card ready-to-play deck of Battle Cards.

:The line-art for the card was done by [[Dan Khanna]], and like the other Bumblebee cards in the Transformers TCG is based on the '''Legacy of Bumblebee''' Classics Bumblebee toy.
{{-}}
*'''Bumblebee, Trusted Lieutenant''' (2019)
**'''Wave 2P'''
**''Rarity: '''''CT'''
**''Card Number: '''''P5/2019'''
**''Stars: ''10
::A reprint of Bumblebee, Trusted Lieutenant was made available as an in-store play promo card for the release of Wave 3: War for Cybertron: Siege I. The card is identical to the original release, printed with gold-foil on the Robot Mode side.
{{-}}
[[File:EEBumblebee.jpg|thumb|upright=1.66]]
*'''Bumblebee, Legendary Warrior''' (2019)
**'''Wave 1: Energon Edition'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T01/T06'''
**''Stars: ''10

:Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Bumblebee, Legendary Warrior. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art by [[Ken Christiansen]]

{{-}}

==Flame Toys==
[[File:FlameToys-FuraiModel-04-Bumblebee.jpg|upright=1.66|thumb]]
===Furai Model===
*'''Bumblebee''' (May 2019)
**''Number:'' '''04'''
**''Accessories'': Gun, Heli-pack, Hammer
{{toydesigner|[[Akira Amemiya]] (concept artist)}}

:Bumblebee is released as part of the ''Furai Model'' line of articulated {{w|Gundam model|Gunpla}}-based model kits from [[Flame Toys]]. Bumblebee also comes with a gun, a heli-pack inspired by his Action Master toy, and a hammer based on his live-action film counterpart's weapon seen in ''The Last Knight''. Using parts made of hard ABS plastic and some polycaps, Bumblebee is approximately Deluxe-sized in height.

:If one chooses, the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers like ''Gundam Markers'' can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.

:Though not meant to be fully clipped together, Bumblebee's torso, feet, and wheel parts can be rearranged into a Volkswagen Beetle-like alt mode.<ref>https://twitter.com/flametoys_staff/status/1129266947550355456</ref>
{{-}}

*'''Bumblebee (Red ver.)''' (<s>2020</s> 20??)
A red version of the Bumblebee figure was revealed in a Flame Toys product catalog, to be released in 2020. However, he has not been released yet, and was also not advertised as Cliffjumper, and simply appeared to be a red Bumblebee.
{{uncertaintoy}}
{{-}}

==''ReAction''==
[[File:TF-ReAction-figure-Bumblebee.jpg|thumb|250px]]
*'''Bumblebee''' (2020, 2024)
**''Accessories'': Blaster pistol

: Released in the first wave of [[Super7]]'s line of multi-property 3.75-inch action figures, ''[[Super7#ReAction|ReAction]]'' Bumblebee is a non-converting "retro-style" action figure with 5 points of articulation, based on his appearance in the original cartoon. He comes with a small blaster which can only be held in his right hand. He has holes on the bottom of his feet for mounting him on some manner of figure stand.

: As with all releases in the ''ReAction'' toyline, Bumblebee comes packaged in a small cardback that emulates the nostalgic packaging style of [[Kenner]] ''[[Star Wars (franchise)|Star Wars]]'' action figures of the late 1970s and early '80s, the figure format the entire line is based around.

: In late 2024, this figure was reissued with no obvious changes, now in a [[blindpacking|blindpacked]] box assortment.

{{-}}{{anchor|ReActionGold}}
[[File:TF-ReAction-figure-Gold-Armor-Bumblebee.jpg|thumb|250px]]
*'''Gold Armor Bumblebee''' (2020)
**''Accessories'': Blaster pistol

:This is a [[Target]]-exclusive redeco of ''ReAction'' Bumblebee, now in ''Generation 2''-inspired metallic gold and black. The gold parts of the card-art are printed with a ''very'' reflective metallic-gold, which often ends up looking black in photography if there's not direct light on it (as seen in the stock imagery at right).

:This figure was something of a [[shelfwarmer|pegwarmer]], eventually getting clearanced out and going from cluttering Target pegs to cluttering [[eBay]] "ReAction" searches.
{{-}}

==Jada Toys==
===''Metalfigs''===
[[File:JadaMetalfigsG1Bumblebee.jpg|upright=1.44|thumb]]
*'''Bumblebee''' (4" Die Cast Figure, 2020)
**''Accessories'': Big blaster, small blaster
:Released by [[Jada Toys]], ''Metalfigs'' Bumblebee is a 4 inches tall non-transforming super deformed die-cast figure with three points of articulation and [[Light-emitting diode|light-up eyes]]. His design blends elements from both his original toy and cartoon appearance.

:He comes with two different blasters as accessories.

{{-}}{{anchor|DioramaScene}}
[[File:JadaMetalfigsG1DioramaScene.jpg|upright=1.44|thumb]]
*'''Diorama Scene''' (2 3/4" Die Cast Figure 4-pack, 2020)
**''Accessories'': Display backdrop
:A static die-cast figurine of Bumblebee measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongside [[Optimus Prime (G1)/merchandise#DioramaScene|Optimus Prime]], [[Starscream (G1)/merchandise#Jada Toys|Starscream]] and [[Megatron (G1)/merchandise#Jada Toys|Megatron]].

:The packaging backdrop can be used as an additional display piece for the set.

{{-}}{{anchor|Metalfigs4pack}}
*'''Optimus Prime / Bumblebee / Optimus Primal / Megatron''' (2 3/4" Die Cast Figure 4-pack, 2022)
:This static Bumblebee figurine is directly designed after the 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongside [[Optimus Prime (G1)/merchandise#Metalfigs4pack|Optimus Prime]], [[Optimus Primal (BW)/toys#Metalfigs|Optimus Primal]] and [[Megatron (G1)/merchandise#Metalfigs4pack|Megatron]].

{{-}}{{anchor|Metalfigssingle}}
*'''Bumblebee''' (2 3/4" Die Cast Figure, 2023)
:The same super deformed Bumblebee from the 4-pack above is also available in individual packaging.
{{-}}

===''Nano Hollywood Rides''===
[[File:JadaNanoHollywoodRidesG13pack.jpg|upright=1.44|thumb]]
*'''Starscream / Volkswagen Beetle Bumblebee / Optimus Prime''' (1.65" Die Cast Vehicle 3-pack, 2020)
:''Nano Hollywood Rides'' Bumblebee is a small non-transforming die-cast licensed Volkswagen Beetle measuring approximately 1.65 inches long. He was released in a 3-pack alongside [[Starscream (G1)/merchandise#Nano Hollywood Rides|Starscream]] and [[Optimus Prime (G1)/merchandise#Nano Hollywood Rides|Optimus Prime]]. Unfortunately, he doesn't feature a sculpted robot mode underneath like most other Jada vehicles do.

{{-}}

===''Nano Metalfigs''===
[[File:JadaNanoMetalfigsG1-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 1 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:''Nano Metalfigs'' Series 1 Bumblebee is an incredibly small die-cast figurine molded with his hands on his waist. He has a little base attached to his feet for balancing reasons.

:He comes in an impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]]. This mold was later redecoed as Series 2 [[Cliffjumper (G1)/toys#NanoMetalfigs2|Cliffjumper]].

{{-}}{{anchor|NanoMetalfigs2}}
[[File:JadaNanoMetalfigsSeries2G1BW-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 2 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:A second ''Nano Metalfigs'' Bumblebee was released in Series 2, this time a redeco of Series 1 [[Cliffjumper (G1)/toys#Jada Toys|Cliffjumper]] who is doing a bit more of an action pose.

:He comes in ''another'' impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{-}}{{anchor|NanoMetalfigs3}}
*'''Transformers Series 3 18-pack''' (4 cm Die Cast Figure Multipack, 2023)
:For the [[Jada Toys#Nano Metalfigs|third ''Nano Metalfigs'' multipack]], Series 1 Bumblebee was re-released with no noticeable changes.
{{-}}

===''Hollywood Rides''===
*'''Bumblebee Volkswagen Beetle''' (Scale 1/32 Die Cast Vehicle, 2024)
:''Hollywood Rides'' Bumblebee is a 1/32 scaled non-transforming die-cast licensed Volkwagen Beetle with rubber tires and opening doors. He was released and found in retail without any prior announcement.
{{-}}

==Figural Bag Clip==
[[File:FiguralBagClip Bumblebee.jpg|upright=1.22|thumb]]
*'''Bumblebee''' (2020)
:Released by [[Monogram]], this 2.5" 3D foam bag clip takes the form of a chibi Bumblebee.

:It was available only as part of a [[Blindpacking|mystery blind bag]] collection.
{{-}}
[[File:FiguralBagClip 2021 Bumblebee.JPG|thumb]]
*'''Bumblebee''' (2021)
:A non-articulated, non-transforming 3" figure of Bumblebee with an attached clip, also released by Monogram.

:Unlike the previous year's release it was sold on a standard cardback.

{{-}}

==D'elicce==
{{note|All Easter eggs listed below were exclusive to Lojas Americanas, a popular Brazilian chain store.}}
[[File:Brazilian Bumblebee Easter Egg 2020.jpg|upright=1.44|thumb]]
*'''''Transformers'' Easter egg''' (90g, 2020)

:In 2020, [[Brazil]]ian chocolate manufacturer Top Cau, under its kid-focused branch D'elicce, released a ''Transformers''-themed 90g [[Easter]] egg that came inside a relatively large hard plastic handbag based on Bumblebee's evergreen head design.

{{-}}{{anchor|delicce2021}}
[[File:Brazilian Transformers Easter Eggs 2021.jpg|upright=1.44|thumb]]
*'''''Transformers'' Easter egg''' (90g, 2021)

:In 2021, D'elicce released another ''Transformers''-themed Easter egg, this time including a popcorn bucket of [[super deformed|cutesy proportions]] based on either Optimus Prime or Bumblebee.

{{-}}{{anchor|delicce2022}}
[[File:Brazilian Bumblebee Easter Egg 2022.jpg|upright=1.44|thumb]]
*'''''Transformers'' Easter egg''' (90g, 2022)
**''Accessories:'' Egg holder/obstacle piece

:D'elicce's 2022 ''Transformers'' egg included a toy of an evergreen Bumblebee car with the robot mode head sticking out of the roof, creating the illusion that Bumblebee is driving himself.

:The car is made of pure yellow plastic (except for the wheels which are black) and is completely hollow underneath due to the egg being stored inside of it in-packaging. It does come with a curved piece made of black plastic attached to its underside that helps to keep the egg in place, but it's not supposed to stay attached after removing the egg since it prevents the car from touching the ground with its own wheels. The piece can be loosely stuck inside the car for improvised storage, but it's clearly not designed to attach in any other way. Instead, the piece itself features a phrase (written in Portuguese) embossed on its inner side suggesting that it should be used as an "obstacle" for the car to play with. Hey, at least they tried to get creative with it. Meanwhile, an Autobot logo is embossed on the outer side of the piece.

:The toy features no paint applications and instead comes with a sticker sheet with 16 stickers—including the car's front grille, headlights, windows and decorative stripes—and instructions on where to apply them. Attention must be paid while applying the stickers, however, as the instructions incorrectly show the headlights and the rear side windows being applied to the opposite side to the one they were actually intended. The transparent plastic used as packaging tries (and fails) to give the impression that the windows come pre-applied, but in reality only the robot's face actually comes as a pre-applied sticker.

{{-}}{{anchor|delicce2023}}
[[File:Brazilian Bumblebee Easter Egg 2023.jpg|upright=1.44|thumb|You may have noticed they're not exactly striving for originality here.]]
*'''''Transformers'' Easter egg''' (90g, 2023)

:The 2023 version of D'elicce's Bumblebee is a big-headed robot mode figure made entirely of two pieces of yellow plastic. Opening the figure in half reveals a chocolate egg and a sticker sheet inside. As was the case with the previous release, only the face comes with a pre-applied sticker, while the stickers for the chest, arms and legs must be applied manually. The stickers for the arms feature noticeable movie-style Autobot insignias.

{{-}}{{anchor|delicce2024}}
[[File:Brazilian Bumblebee Easter Egg 2024.jpg|thumb|upright=1.44|Did [[Shockwave (Animated)|Shockwave]] do this to you?]]
*'''''Transformers'' Easter egg''' (90g, 2024)
:Yet another Evergreen Bumblebee big head was released in 2024, this time in the form of a lunchbox or something. You can tell they're not even trying anymore.
{{-}}

==''Super Cyborg''==
[[File:SuperCyborgBumblebee.jpg|upright=1.66|thumb]]
*'''Bumblebee''' (2021)
**''Accessories'': Blaster, torso plate

:''Super Cyborg'' Bumblebee is an 11-inch-tall non-transforming vinyl figure produced by [[Super7]]. Its most significant feature is the ability to remove the entire front of the torso to reveal sculpted inner mechanical detailing.

*'''Bumblebee (Clear)''' (2021)
**''Accessories'': Blaster, torso plate

:Another version of ''Super Cyborg'' Bumblebee was available in mostly transparent plastic, with only some black and yellow on the inner torso parts to make the "x-ray" feature more distinct.
{{-}}

==''Minimates''==
*'''Bumblebee''' (Series 1, 2021)
**''Accessories'': Pistol, alternate head, stand

:Part of the first wave of Transformers [[Minimates]] from [[Diamond Select Toys|Diamond Select]], this Bumblebee is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. The set also includes an alternate head for Bumblebee styled after his Generation 1 toy. Due to their small size, all 4 figures in each series are sold in the same blister card.

*'''VHS Minimates Box Set''' (2022)

:''Minimates'' Bumblebee was rereleased as part of a [[San Diego Comic-Con]] 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles a [[Family Home Entertainment]] VHS tape. Only 2500 of this set were produced.
{{-}}

==''R.E.D. [Robot Enhanced Design]''==
[[File:TF-R.E.D.-Bumblebee.jpg|upright=1.66|thumb|Put me with your Marvel Legends and I'm [[B.O.T. (episode)#Animation and technical errors|perfectly scaled!]]]]
*'''Bumblebee''' (2021)
**''Accessories'': blaster, 2 alternate hands, 2 [[Fire Blast effect|blast effects]], [[Energon cube]], chest plate
:Released as part of the third wave of ''[[Transformers R.E.D.]]'' toys, Bumblebee is a non-transforming 6-inch action figure akin to the ones from the ''[[Marvel Comics|Marvel]] Legends'' and ''[[Star Wars (franchise)|Star Wars]] The Black Series'' lines. He features 26 points of articulation and is decoed in an attempt at [[show-accuracy]], with an extra smattering of ''[[War for Cybertron: Siege|Siege]]''-style battle damage. His robot mode is based on [https://www.instagram.com/p/CLo1eYQASuE/ concept art] by [[Ken Christiansen]], which had earlier influenced Bumblebee's look in the [[Transformers (2019 comic)|2019 IDW ongoing comic]] and the ''[[Transformers: War for Cybertron Trilogy (cartoon)|War for Cybertron Trilogy]]'' animated series.

:Bumblebee's chest plate can be removed to reveal details meant to represent his "inner workings". He comes with two sets of hands: one pair of closed fists, and one pair of open hands for holding weaponry and accessories. Speaking of which, he also includes a small blaster accessory (though his product description claims he has two), along with a pair of fire blast effects to simulate weapons discharge. He also comes with an Energon cube.

:As with all ''R.E.D.'' toys, Bumblebee was a Walmart exclusive in Canada and the United States, and was later made available on [[Hasbro Pulse]] in limited quantities.
{{-}}

==''Pop!''==
[[File:Funko Pop Regular Bumblebee G1.jpg|thumb|upright=1.44]]
*'''Bumblebee''' (2021)
**''ID number:'' '''23'''

:Released as part of the ''Pop! Retro Toys'' segment, [[Funko Pop!|Funko]]'s ''Pop!'' Bumblebee is a super deformed vinyl figure based on his original Generation 1 toy, although with a more cartoon-accurate face and carrying a small blaster on his right hand.

{{-}}{{anchor|PopClassics}}
[[File:Funko Pop Target Classics Bumblebee.jpg|thumb|upright=1.44]]
*'''Bumblebee''' (2021)
**''ID number:'' '''28'''

:Exclusive to [[Target]], this version of Bumblebee is instead based on his [[Bumblebee (G1)/toys#Classics|''Classics'' toy]], complete with the [[Wave Crusher]] attached to his back.

{{-}}{{anchor|PopKeychain}}
[[File:Funko Pocket Pop Keychain Bumblebee.jpg|thumb|upright=1.11]]
*'''Bumblebee''' (Pocket ''Pop!'' Keychain, 2021)

:A smaller version of the G1-toy ''Pop!'' Bumblebee with a keychain attached to his head.

{{-}}{{anchor|Digital Pop!}}
*'''Bumblebee''' ([[Funko Pop!#Digital Pop! NFTs|Digital ''Pop!'']], 2022)
**''Rarity:''
***''Monochrome:'' '''Common'''
***''Static:'' '''Common'''
***''Glowing:'' '''Uncommon'''
***''Chrome:'' '''Rare'''
***''Original:''Epic''
:{{W|Non-fungible token|NFT}}s depicting Bumblebee in the Funko style. Interestingly, the [[Ark (G1)|Ark]] seems to be mobile on Earth's surface, something which it never was while Bumblebee was conscious during the [[The Transformers (cartoon)|G1 cartoon]] the figure is likely based on.
<center><gallery heights=200>
File:TRANSFORMERS_COMMON_BUMBLEBEE_MONOCHROME.gif|You like bumblebees? How about a whole hive!
File:TRANSFORMERS_COMMON_BUMBLEBEE_STATIC.gif
File:TRANSFORMERS_UNCOMMON_BUMBLEBEE_GLOW.gif
File:TRANSFORMERS_RARE_BUMBLEBEE_REDCHROME.gif
File:TRANSFORMERS_EPIC_BUMBLEBEE_ORIGINAL.gif
</gallery></center>

{{-}}{{anchor|PopFreddy}}
[[File:Funko Pop Freddy as Bumblebee.jpg|thumb|upright=1.11]]
*'''Freddy Funko as Bumblebee''' (2022)
**''ID number:'' '''50'''

:Part of the ''Pop! Digital'' segment, this regular-sized vinyl figure portrays [[Freddy Funko]] cosplaying as Bumblebee. The body of this figure is the same as the G1-toy version of Bumblebee, while the head has been modified to incorporate Freddy's face and a crown on its top. It could only be acquired by redeeming [[Freddy Funko#Digital Pop!|one of the three 1-of-1 NFTs]] featuring this figure.

{{-}}{{anchor|Pop! Pin}}
[[File:Funko-Pop-Pin-Bumblebee.jpg|thumb|upright=1.44]]
*'''Bumblebee''' (''Pop!'' Pin, 2022)
**''ID number:'' '''17'''
**''Accessories:'' Display stand
:A metallic enamel pin based on Bumblebee's ''Classics'' vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

{{-}}{{anchor|PopPotato}}
*'''Mr. Potato Head Bumblebee''' (''Pop! Digital Retro Toys'', 2022)
**''Rarity:'' '''Legendary'''
**''ID number:'' '''125'''
:Similar in concept to other [[Mr. Potato Head]] toys, this vinyl figure is a representation of said character taking the appearance of Bumblebee, except it can't be taken apart piece by piece.

:This figure is limited to 1550 units and can only be acquired redeeming an NFT representing this version of the character.

{{-}}

==''Zōteki''==
[[File:ZOTEKI-026-Bumblebee.jpg|thumb|upright=1.66]]
*'''Bumblebee''' ([[2021]])
**''ID number'': '''026'''

:A collaboration between [[Hasbro]] and statue/replica brand [[Jazware]], ''[[The Transformers (franchise)|The Transformers]]'' was added as a part of the ''[[Zōteki]]'' line alongside other iconic brands such as [[Marvel Comics|Marvel]], to recreate some of the main "Generation 1" characters. The 26th figure of the ''Zōteki'' line is Bumblebee.

:Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
{{--}}

==Eaglemoss==
[[File:EaglemossChess Bumblebee.jpg|upright=1.11|thumb|Cliffjumper would've honestly fit the role.]]
* '''Transformers Gen-1 Chess Set''' (<s>2021</s>)
:In the planned [[Chess#Eaglemoss|Transformers Chess Set]] by [[Eaglemoss]], a relatively large and very well-detailed statue of Bumblebee was slated to be one of the Pawn pieces on the Autobot side.

:A Kickstarter campaign to raise the necessary funds for this project was launched but failed to meet its goal by September 24, 2021, and the whole thing was canceled.
{{canceledtoy}}
{{-}}

==Prime 1 Studio==
===''Cutie1''===
[[File:Cutie1 Bumblebee Figure.jpg|upright=1.11|thumb]]
*'''Bumblebee''' (2022)
**''ID Number'': '''No:057'''
**''Accessories'': Stand

:[[Prime 1 Studio]]'s ''Cutie1'' Bumblebee is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

{{anchor|Cutie1keychain}}
*'''Bumblebee''' (Keychain, 2021)
**''Accessories'': Stand, chain

:Part of a marketing push following the announcement of the figure above, an acrylic keychain of ''Cutie1'' Bumblebee was released, along with other products such as stickers, T-shirts, hand towels and totebags using its design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.
{{-}}

==Acrylic keychain series==
[[File:E-Hobby Optimus Prime and Bumblebee keychains.jpg|upright=1|thumb]]
*'''Convoy & Bumble''' ([[October]], [[2022]])

:Released as part of the first wave of an [[e-HOBBY]] exclusive series, this pair of keychains depicts character art and assets re-used from [[Optimus Prime (G1)|Optimus Prime]] and Bumblebee's [[The Transformers: Masterpiece|''Masterpiece'']] releases, namely [[Optimus Prime (G1)/toys#MP44|MP-44 Convoy]] and [[Bumblebee (G1)/toys#MP45|MP-45 Bumble and Spike 2.0]] respectively.

{{--}}
==''Authentics''==
{{anchor|ClipBot}}
[[File:ClipBotsBumblebee.jpg|upright=1|thumb]]
*'''Bumblebee''' (2018)

:''Clip Bots'' Bumblebee is a small [[super deformed]] plush that can be "transformed" into a little car by flipping it inside out. It features a plastic clip so it can dangle from whatever you clip it to.
{{-}}
{{anchor|22Mask}}
[[File:Authentics Bumblebee Mask 2022.jpg|upright=1|thumb]]
*'''Bumblebee''' (2022)

:Modeled after Bumblebee's evergreen design, this [[roleplay toy]] mask was released along side an [[Optimus Prime (G1)/merchandise#22Mask|Optimus Prime]] version.
{{-}}

{{anchor|24Mask}}
[[File:Authentics Bumblebee Mask 2024.jpg|upright=1|thumb]]
*'''Bumblebee Mask''' ([[2024]])

:Manufactured by [[Peachtree Playthings]], this mask is a completely new mold based on Bumblebee's evergreen design, though some details such as the two black vertical stripes over his eyes are unpainted. It was found at discount stores such as Dollar Tree with no prior announcement. As with the previous mask, it was released along side an [[Optimus Prime (G1)/merchandise#24Mask|Optimus Prime]] version.
{{-}}
{{anchor|CBbumblebee}}
[[File:Authentics Cyber Battlers Bumblebee.jpeg|upright=1|thumb]]
*'''Cybertron Battlers Bumblebee''' ([[2022]])
:Released in the ''Cybertron Battlers'' subline of ''Authentics'', this vinyl figure is a non-transforming, 5.5 inch rendition of Bumblebee in his evergreen design with limited points of articulation. He has a stinger weapon molded into his right forearm, complete with molded sparks.

:He comes packaged either individually with a tag, or in twos in a box together with [[Optimus Prime (G1)/merchandise#Authentics|Optimus Prime]] and [[Megatron (G1)/merchandise#Authentics|Megatron]].
{{-}}

{{anchor|AquaPals}}
[[File:AquaPalsMediumBumblebee.jpg|upright=1|thumb]]
*'''Bumblebee''' (2023)

''Aqua Pals'' Bumblebee was released by [[WAHU]]. It is a plush made out of material designed to dry quickly, allowing it to be played with in water. A medium and a small version were released, the smaller version having less detail. This is most noticeable in the arms, which go from having multiple distinct segments to almost entirely cylindrical, besides the hands. The medium plush is 16 inches tall.
{{-}}
{{anchor|Teeturtlereverse}}
[[File:Small_Reversible_Bumblebee_Teeturtle.jpg|upright=1|thumb]]
*'''Reversible Plushie Bumblebee''' ([[2025]])

:Released by [[TeeTurtle]], ''Reversible Plushie'' Bumblebee is a round, [[super deformed]] plush, that can be turned inside out to reveal a car alternate mode. A 3 inch version was released in blind boxes, while a 6 inch version was made available exclusively at [[Walmart]]. It appears to be based on Bumblebee's [[evergreen]] design.
{{-}}
{{anchor|Teeturtlecloudhead}}
[[File:Cloudheads_Bumblebee_Teeturtle.jpg|upright=1|thumb]]
*'''Cloudheads Bumblebee''' (2025)

:Also released by [[TeeTurtle]], ''Cloudheads'' Bumblebee is another [[super deformed]] plush based off of Bumblebee's [[evergreen]] design. It is 5 inches tall. It has a large head, and its body is weighted with glass beads.
{{-}}

==Icon Heroes==
*'''Optimus Prime X Bumblebee Retro Pin Set''' (2022)
: A hard enamel pin based on Bumblebee's original G1 package art made by Icon Heroes. It comes carded with an [[Optimus Prime (G1)/merchandise#Icon Heroes|Optimus Prime]] pin.

{{comingsoontoy}}

{{--}}

==''Magic: The Gathering''==
[[File:MTG-Goldbug.jpg|thumb|upright=1.66|Pairs well with the Equipment Artifact [[Hard hat|Hard Hat]].]]
*'''Goldbug, Humanity's Ally / Goldbug, Scrappy Scout''' (2022)
**''ID number:'' '''011/015'''
**''Set code:'' '''BOT'''
**''Color identity:'' '''White/Blue'''
**''Casting cost:'' '''{1}{W}{U}''' (front), '''{W}{U}''' (back)
**''Artist:'' [[Andrew Griffith]]
:"Goldbug, Humanity's Ally" is part of the 2022 ''[[Magic: The Gathering]]'' ''[[mtg:Universes Beyond|Universes Beyond]]'' ''[[mtg:Transformers|Transformers]]'' card set, found in Set Booster and Collector Booster packs of ''Magic''<nowiki>'s</nowiki> ''[[mtg:The Brothers' War|The Brothers' War]]'' set. It can be reversed to become "Goldbug, Scrappy Scout", representing Goldbug in vehicle mode.
:A variant of this card was available solely in Collector Booster packs, depicting [[Goldbug (SG)#Magic: The Gathering|''Shattered Glass'' Goldbug]].

{{--}}

==XM Studios==
[[File:XMStudiosBumblebeeStatue.jpg|upright=1.66|thumb|Cute and kid-friendly... ''to the extreme!'']]
*'''Bumblebee''' (2022)

:[[XM Studios]]' statue of Bumblebee is 13" tall, made of hand-painted porcelain. Bumblebee has light-up eyes and two different head sculpts, one with his standard face and one with his battle mask. Bumblebee is accompanied by Spike, wearing an exo-suit. The set also includes a sculpted representation of Bumblebee's car mode that can be displayed next to the robot.

:258 pieces were produced, with a suggested price of about $1,200 US.

{{-}}

==Threezero==
[[File:Threezero-MDLX-Bumblebee.jpg|thumb|upright]]
*'''Bumblebee''' (MDLX, 2022)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one "Laser Blaster", one alternate masked head, three pairs of hands (relaxed, closed, posed)
:[[Threezero]]'s debut figure for the MDLX line, this version of Bumblebee is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Bumblebee is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and heads, with the alternate visored face specifically resembling his G1 toy. The three pairs of hands he comes with are relaxed splayed-open hands, closed fists, and posed hands meant to hold his included Laser Blaster (which in turn is based on the pistol used in the cartoon). His back tire can also be removed.

:Bumblebee was redecoed into his Gold Edition release below and retooled with a new head into [[Cliffjumper (G1)/toys#Threezero|Cliffjumper]].

::*''[https://www.threezerohk.com/product/mdlx-bumblebee/ More information on MDLX Bumblebee at Threezero]''
{{MDLXBumblebeeMold}}
{{-}}

{{anchor|MDLXGold}}
[[File:Threezero-MDLX-Bumblebee-Gold.jpg|thumb|upright]]
*'''Bumblebee (Gold Edition)''' (MDLX, 2022)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one "Laser Blaster", one alternate masked head, three pairs of hands (relaxed, closed, posed)
:A golden redeco of the above Bumblebee release that calls to mind both his [[Bumblebee (G1)/toys#Generation 2|G2 toy]] and [[Bumblebee (G1)/toys#Goldbug|Goldbug]], this figure was limited to 2000 units worldwide.

::*''[https://www.threezerohk.com/product/mdlx-bumblebee-gold-edition/ More information on MDLX Bumblebee (Gold Edition) at Threezero]''
{{MDLXBumblebeeMold}}
{{-}}

{{anchor|MDLXVintage}}
*'''Bumblebee (Vintage Animation Edition)''' (MDLX, 2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one "Laser Blaster", one alternate masked head, three pairs of hands (relaxed, closed, posed)

:Another redeco of Bumblebee, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

:Vintage Animation Edition Bumblebee, [[Megatron (G1)/merchandise#MDLXVintage|Megatron]] and [[Optimus Prime (G1)/merchandise#MDLXVintage|Optimus Prime]] were revealed in a [https://newsroom.hasbro.com/news-releases/news-release-details/40-years-one-legacy-hasbro-celebrates-transformers-40th press release] from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

::*''[https://www.threezerohk.com/product/mdlx-bumblebee-vintage-animation-edition/ More information on MDLX Bumblebee (Vintage Animation Edition) at Threezero]''
{{MDLXBumblebeeMold}}
{{comingsoontoy}}
{{-}}

==''Transformers × Mini World''==
[[File:MiniWorldBumblebee.jpg|thumb|upright=1.66]]
*'''Bumblebee''' (2023)
**''Accessories'': Transforming base, gun, sword, machine part, crane arm, 2 connectors

:''[[Transformers × Mini World]]'' Bumblebee is a tie-in to the popular [[China|Chinese]] game ''[[Mini World]]''. It comes with a display base which can fold up into a cube-shaped representation of a hatchback, complete with rolling wheels. The figure can transform into a storage mode to store fully inside the cube, or you can remove his head and install the entire cube on his neck. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and sword accessories.

:Each set includes [[Build a Figure]]-like machinery components which can be combined with parts from other sets to make new structures.

:This figure was exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.
{{-}}

==Mochibots Transformers Plush==
[[file:bumblemochibots.jpg|thumb|thumbright=1.5|[https://youtu.be/2RPV-hD-Eo0?si=klasB9IQ2dTTLPd9 ''They don't allow you to have Bees in here.'']]]
<ul class="iconlist">{{Bp-a1|'''Mochibots "Transformers" Plush Bumble''' (2023)}}</ul>
:Created in the line of soft, cuddly little 'bots, [[Mochibots Transformers Plush|Mochibots]] Bumble is a 5.5 Inch tall plushie of everyone's favorite yellow Autobot, applying a stylized "Fumo" look for Bumblebee's Sunbow Cartoon Animation model, with rounded shapes and chubbier proportions making him an adorable stuffed adaptation of his 80's design. Almost every detail is sewn-on, allowing for depth and texture on different parts of the plush. On the back, Bumble sports his spare tire, represented by a yellow ball of plush. In addition, his eyes and window detailing are all made with a special sparkly fabric, which allows for those details to slightly shimmer under light.

:Bumble was released as part of the first wave of Mochibots plush toys, alongside Optimus Prime, Cliff, and Shattered Glass Optimus Prime in 2023. This line was exclusive to China and Japan, with almost all of them being locked to Asia via [[amiami|amiami's]] storefront.

{{-}}
==Just Play==
{{anchor|Podpals}}
[[File:PodpalsMiniBumblebee.jpg|upright=1|thumb]]

*'''Podpals Bumblebee''' (2023)

Made by [[Just Play]], ''Podpals'' Bumblebee is a rounded plush. It has tiny flaps of fabric for its legs and horns, while other details are printed on. There are two versions, an 8 inch version and a 3 inch version. They are identical besides their size.

<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2022)}}</ul>
:Bumblebee is a small, soft plastic figure, 2" tall, with no articulation. It's overall based on his appearance in the G1 cartoon with a few missing paint apps; all of which are on his feet.
:The packaging is G1-styled with the classic black-red gradient and the G1 Optimus Prime toy in the top right corner.

[[File:JustPlay_G1_Bumblebee.jpg|thumb|upright=.66]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2024)}}</ul>
:This figure is identical to the original release. Unlike the original release, however, he also comes with a foil sticker depicting his G1 design on a card with a sort of profile picture on the back and text underneath it saying '"BEE," AS HIS FRIENDS CALL HIM, IS THE AUTOBOTS' ADVANCE SCOUT.' The packaging is also different as it no longer features Optimus Prime (having been replaced with a block advertising the new card).
: There's a variant of this found at stores like Dollar Tree where the block advertising the card is moved to the top left with a red circle that says "$1.25" in it in the top right instead.

{{-}}

==Kotobukiya Bishoujo Series==
[[File:KotobukiyaBishojouBumblebee.jpeg|thumb|Happy slapping hoodies with Asbos and ringtones.]]
*'''Bishoujo Series Transformers Bumble/Bumblebee''' (August 2023)
**''Known designers:'' [[Shunya Yamashita]] (artist)

:''[[Kotobukiya]] [[Bishoujo Series]]'' Bumble/Bumblebee reimagines the Autobot scout as a ''bubbly'' anime girl (formally termed as a ''{{w|Bishōjo}}''). The Bishoujo Bumblebee statue sees various elements of the classic G1 robot design translated into fashion and style choices, such as the hood adorned with the G1 horns, the car roof and window chest as a light blue undershirt visible underneath the sleeveless hoodie, and the hood of the VW Beetle altmode as shoes.

:This statue was later recolored to create ''Bishoujo Series'' [[Cliffjumper (G1)/toys#Kotobukiya Bishoujo Series|Cliffjumper]].

{{-}}

==Fools Paradise==
[[File:LOWFOOL League of Steel Bumblebee.jpeg|upright=1.66|thumb]]
*'''Bumblebee''' (2023)
**''Accessories'': Football

:Part of a collaboration between Hasbro and [[Hong Kong]]-based online store ZCWO, Bumblebee joins the "League of Steel" subline of [[Fools Paradise]]'s LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues of [[Neon Genesis Evangelion|Evangelion]]s and {{w|Gundam}}s. He is depicted as a human man wearing heavily Bumblebee-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache.

:Preorders for Bumblebee opened in July 2023, with a projected release date of November.

{{-}}

==''Hot Wheels''==
{{anchor|HWScreenTime}}
[[File:Hot Wheels HW Screen Time Bumblebee.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1| '''Bumblebee''' (HW Screen Time, 2024)}}</ul>
:*''Mainline ID number:'' '''186/250'''
:*''HW Screen Time ID number:'' '''9/10'''
:*''Known designers'': Jerry Thienprasiddhi (Mattel)
:Made in collaboration with [[Mattel]], ''[[Hot Wheels (franchise)|Hot Wheels]]'' Bumblebee is a non-transforming and fully licensed Volkswagen Beetle at 1/64 scale, slightly retooled from the existing "[[wikia:hotwheels:VW Bug|VW Bug]]" Hot Wheels casting. Bumblebee lacks a robot mode, though his face is sculpted into the bottom of the car undercarriage. The toy can be hauled in the later released ''Hot Wheels'' [[Ultra Magnus (G1)/merchandise#Hot Wheels|Track Fleet Ultra Magnus]] trailer.

:There are two versions of this release. The original one is in a traditional yellow color with a red Autobot insignia on the left side of the hood. It was then followed by a variant painted gold, possibly in reference to Goldbug, with a black insignia instead.

:As is the case with most ''Hot Wheels'' releases, the packaging depicts a realistic render of the miniature vehicle, which is colored accordingly to the variant of the toy packaged with it.

{{-}}{{anchor|HWCustom}}
[[File:Hot Wheels Transformers Custom Volkswagen Beetle.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Custom Volkswagen Beetle''' (Transformers, 2024)}}</ul>
:*''Transformers ID number:'' '''1/5'''
:*''Known designers'': Mike McClone (Mattel)
:A redeco of the [[wikia:hotwheels:Custom Volkswagen Beetle|Custom Volkswagen Beetle]] casting to resemble the color scheme and insignia of Bumblebee despite the casting being a much more chopped down hot rod version of the Beetle. The packaging makes use of stock images of evergreen Optimus Prime and Bumblebee.

{{-}}{{anchor|HWSkate}}
[[File:Hot Wheels Skate Bumblebee.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (Skate, 2024)}}</ul>
:*''Accessories'': Finger sneakers
:Part of the ''Hot Wheels Skate'' subset, this is a Bumblebee-themed finger skateboard that comes with a pair of yellow finger sneakers. The shape and packaging use Dreamwave-era artwork of Bumblebee.

{{-}}

==''Yolopark''==
===''AMK Mini''===
[[File:Yolopark-TF-AMK-Mini-Bumblebee.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2024)}}</ul>
:*''Accessories'': 2 additional pairs of hands (Splayed, Pointing), Autobot Pistol

:Released as part of Yolopark's ''AMK (Advanced Model Kit) Mini Series'', this Bumblebee kit can only be completed by snapping the pre-painted pieces together. Aside from the identical hand parts used for most of the ''AMK Mini''s, Bumblebee also comes with his usual signature Autobot pistol.

:This mold was used to make the unofficial BotCon 2025 exclusive "The Sound of Science" [[Glyph (Universe)#Yolopark|Glyph]] and the single-pack [[Cliffjumper (Yolopark)|Cliffjumper]].

{{-}}
<ul class="iconlist">{{Bp-a1|'''Bumblebee (IDW)''' (2025)}}</ul>

:The second wave of the ''AMK Mini''s features a new mold of the Autobot Scout in his [[Evergreen]] design used in ''[[Transformers: Unicron]]''.

{{uncertaintoy}}
{{-}}

===''AMK''===
[[File:Yolopark-TF-AMK-Bumblebee.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2025)}}</ul>
:*''Accessories'': 1 additional pair of hands, Autobot pistol, alternate mouthplate

:The ''Advanced Model Kit'' Series Bumblebee is a slightly larger version of the character, and unlike the previously-released AMK Pro kits, he is purely made out of ABS plastic with no die-cast. In addition to his extra pair of hands and an Autobot Pistol, Bumblebee comes with an additional smiling mouthplate.

{{-}}{{anchor|AMKHasbroEdition}}
[[File:Yolopark-TF-AMK-Bumblebee-Hasbro-Edition.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (Hasbro Edition, 2025)}}</ul>
:*''Accessories'': 1 additional pair of hands, Autobot pistol, alternate mouthplate, Stand with Mount St. Hilary backdrop

: The ''AMK'' Bumblebee kit is re-released in Asian markets under the "Hasbro Edition" branding. While the kit itself was unchanged, Bumblebee also includes an additional display stand featuring a backdrop of Mount St. Hilary.

{{-}}{{anchor|AMKComboSet}}
[[File:Yolopark-TF-AMK-Optimus-Prime-and-Bumblebee-Combo-Set.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime and Bumblebee Combo Set''' (2025)}}</ul>

:The "Hasbro Edition" of the AMK Bumblebee kit is also sold as a two-pack with the same line's Optimus Prime. The 2-pack also comes with a unique acrylic stand of Prime himself.

{{-}}

===''BMK''===
[[File:Yolopark-BMK-Bumblebee.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2025)}}</ul>
:*''Accessories'': Autobot pistol

:Marketed as a starter figure for the 2020s young lads, the ''BMK'' (Which stands for "Beginner Model Kit") Bumblebee is a 13cm version of the character, with his design based on the ''AMK'' release. As with other ''BMK''s, Bumblebee features similarly basic articulation, consisting of a ball-jointed head, ball-jointed shoulders, single-axis 90-degree elbows, a rotating waist, and slightly swiveling ankles...that's it.
{{-}}

==Blokees==
===Galaxy Version===
[[File:Blokees-TF-Galaxy-Ver-03-Bumblebee.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2024)}}</ul>
:*''Series:'' '''Galaxy Version 03 - The Autobot Run'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, left thumbs up hand, Autobot pistol, blast effect, communications monitor, [[Energon]] cube, holdable Autobot/Decepticon insignias

:Released in the third wave of ''Galaxy Version'' line of blind boxes, [[Blokees]] Bumblebee is a roughly 4-inches tall, highly-articulated, and non-transforming snap-on model kit of the Autobot Scout. He is built on a "Standard Body" skeleton shared with other Blokees figures in the line, but with different body pieces to make them distinct. As advertised in the box, Bumblebee has a pull rate of 1 in every 9 boxes, or three times across four cases. Unlike the previous line's Cliffjumper, Bumblebee features a color-coded head construction instead of a 2-piece head with pre-painted eyes.

:Bumblebee comes with a pair of closed and open hands and a left hand molded in a thumbs-up exclusive to this figure. He also comes with his own Autobot pistol and its respective blast effect, an Energon Cube, and a communications monitor that either of the closed hands can wield. However, it's recommended plugging the piece onto one of his forearms (the arms must be swapped and the forearms rotated to show its peghole.). Bumblebee also comes with a stand with four studs on top, which can be plugged into and connected to similar stands.

{{-}}
===Defender Version===
{{Note|Every case comes with a random Commemorative Card, with 10 Common, 1 Gold, and 1 Silver for each out of every 12 cards. Meanwhile, subsequent waves after the first one feature a rectangular collectible card for each individual box.}}
[[File:Blokees-TF-Galaxy-Version-Defender-01-Brilliant-Bumblebee.jpg|thumb|300px|Somehow his ''Shattered Glass'' counterpart took his spot as the next wave's Special Galaxy Type.]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee (Brilliant)''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Pistol

:This ''Defender Version'' kit of Bumblebee (decoed in his Goldbug-inspired colors) is a 2.2-inch (5.5cm) figure, a few inches smaller than the ''Galaxy Version'' kits, but still articulated. Unlike his ''Galaxy Version'' kit, Bumblebee only comes with the generic pistol used by other Defender kits.

:Like most of the larger Galaxy Version kits, Bumblebee features a simple neck joint that is colored to match his optics, allowing it to be see-through from his head's eye holes. This mold was also used to make the chase [[Goldbug (SG)|SG-Bumblebee]] kit.

{{-}}{{anchor|TheOverthrowBB}}
[[File:Blokees-TF-Galaxy-Version-Defender-02-Bumblebee.jpg|thumb|300px|]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (2025)}}</ul>
:*''Series:'' '''Defender Version 02 - The Overthrow'''
:*''Accessories'': Pistol

:One of the six headline figures for the second ''Galaxy Version Defender'' line, this Bumblebee is a redeco of the previous kit, now in his regular, classic coloration.
{{-}}{{anchor|SpecialArmorType}}
[[File:Blokees-TF-Galaxy-Version-Defender-02-Special-Armor-Type-Bumblebee.jpg|thumb|250px|''You, sir, have crossed the wrong sword!'']]
<ul class="iconlist">{{Bp-a1|'''Bumblebee (Special Armor Type)''' (2025)}}</ul>
:*''Series:'' '''Defender Version 02 - The Overthrow'''
:*''Accessories'': Sword, Shield

:The "Special Armor Type" version of the Bumblebee is an alternate version of the original kit, decked out in metallic paint, and comes with additional armaments such as the sword and backpack wings (inspired by his ''Robots in Disguise'' namesake's sword and wings) and an energy shield (inspired by the shield in [[Rebellion (Prime)|''Rebellion'']]). Unlike the chase SG-Bumblebee variant, this kit has an even slimmer pull rate of '''''1''''' in every 144 boxes, or once per twelve cases.

{{-}}

===Shining Version===
[[File:Blokees-TF-SV03-Bumblebee.jpg|thumb|upright=1.66|Build-Your-Own Bumblebee Action Figure owned by [[Anthony Duranti]].]]
<ul class="iconlist">{{Bp-a1|'''Bumblebee''' (Shining Version, 2025)}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, left thumbs up hand, Autobot pistol, Spike Witwicky figurine, communications monitor

:Released in the third wave of Blokees' ''Shining Version'' line, this edition of the original ''Galaxy Version'' Bumblebee mold is now decoed in his yellow-and-blue [[Marvel Comics]] coloration, and like his second Yearly Version set release; he features translucent eye parts and painted chest, and a torso frame that lights up upon shaking (or at least just ''lightly'' tap some areas on the torso), causing the eyes and his chest window to glow for a limited time. In addition to his identical accessories from the ''Galaxy Version'' release, Bumblebee also comes with an additional Spike Witwicky figurine replacing the previous release's blast effect, and a larger figure stand. The visual on a communications monitor depicts Spike Witwicky in his Exo-Suit in ''The Transformers: The Movie''.
{{--}}

==Auldey==
[[File:Auldey-TF-AAE-bumblebee.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Bumblebee''' (Alpha Action Elite, 2025)}}</ul>
:*''Series:'' '''Attack on Earth'''
:*''ID Number'': '''AAE-011'''
:*''Accessories:'' 2 pairs of hands (1 pair for each), Shrapnel's blaster, Bumblebee's blaster, Laserbeak, Energon cubes, 2 trading cards
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of the second wave of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Bumblebee is a roughly 2-inch non-transforming but highly articulated action figure, and is retool of [[Cliffjumper_(G1)/toys#Auldey|Cliffjumper]]. Aside from the extra pairs of open-palm hands, Bumblebee comes with his blaster and a back tire piece that the buyer must assemble.

:Bumblebee is released as a 2-pack with [[Shrapnel_(G1)#Auldey|Shrapnel]] and [[Ravage (G1)/toys#Auldey|Ravage]], while coming with his trading card. As advertised in the box, the lineup had a 11/72 probability of getting the 2-pack. The mold was redecoed as [[Goldbug_(SG)#Auldey|SG Bumblebee]] and further retooled into his upgraded form of Goldbug as seen below.

{{-}}
[[File:Auldey-TF-AAE-Goldbug.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Goldbug''' (Alpha Action Elite, 2025)}}</ul>
:*''Series:'' '''Attack on Earth'''
:*''ID Number'': '''AAE-017'''
:*''Accessories:'' 2 pairs of hands (1 pair for each), Goldbug's blaster, Bumblebee's blaster, 2 trading cards
{{toydesigner|[[Lam Ahtek]]}}

:The other chase figure(s) of the second wave, packed in alongside his [[Goldbug (SG)#Auldey|negative universe counterpart]], Goldbug is a further redeco and retool of Bumblebee with metallic paint and a new head, backpack, and feet. Aside from the usual pairs of hands, he also comes with his blaster, redecoed in silver, alongside a trading card.

:As advertised in the box, the lineup had a 1/72 probability, or once every twelve cases, of getting the 2-pack.
{{--}}

==Beyblade X==
[[File:Beyblade_X_Transformers_Bumblebee.jpg|thumb]]
*'''Bumblebee and Shockwave Multipack Set''' (2025)

:'''Bumblebee 3-60GP''' was available in a two-pack with [[Shockwave_(G1)/toys#Beyblade_X|Shockwave 5-80O]]. It consists of three pieces that can be interchanged with those of [[Beyblade#BEYBLADE X|other ''Beyblade X'' tops]]; an attacking "Blade" primarily made of metal, a "Ratchet" that locks parts together and determines height, and a "Bit" that touches the ground and determines movement.

:The "Bumblebee" Blade features evergreen art of Bumblebee on its central Gear Chip and is partial of the mainline ''Beyblade X'' Blade "Helm Knight". The Ratchet (3-60) and Bit (Gear Point) are recolored parts from other ''Beyblade X'' tops.

:In Hasbro territories, a QR Code sticker hidden underneath the Blade can be scanned into the ''Beyblade X'' companion app. In Takara-Tomy territories, the QR Code stickers are omitted in favor of a Beycode Card packed with the instructions. However, scanning any of these QR codes only awards the player with in-app points, and will not unlock the Beyblade for in-game use like it would for any mainline ''Beyblade X'' tops.

{{-}}

==Ty==
* '''Beanie Bouncer Optimus Prime'''
[[File:Bouncer-bb.jpg|thumb|200px|]]

:A bouncing ball covered in fur produced by Ty, creator of the more famous Beanie Babies and Beanie Boos. Bumblebee's horns are represented by additoinal pieces of felt material coming out of the ball. Opposite the face is an Autobot symbol.

:Bumblebee is also available in a three set alongside Optimus Prime and Megatron.

{{-}}

==References==
{{reflist}}

[[Category:3D Battle-Cards]]
[[Category:Attacktix]]
[[Category:Decoys]]
[[Category:Generation 1 Autobots]]
[[Category:MyClone]]
[[Category:Robot Heroes]]

Megatron (G1)/merchandise

2025-10-27T17:08:07Z

Leia G: Added Beanie Bouncer Megatron

{{suite}}
Peace through merchandising!

==Wireless Microphone==
[[File:MegsMicrophone.jpg|thumb|]]
* '''Megatron''' (Nasta, 1984)
:One of the earliest pieces of Megatron merchandise is also one of the strangest. Taking the form of Megatron's Walther P-38 gun mode — itself quite controversial and anachronistic due to [[For safety reasons|recent safety regulations]] — the microphone allows children to broadcast their voices to a nearby AM radio by pointing the gun at their mouth (at the rear sight, not the ''barrel muzzle'' at least) and speaking into it.

:'''''Seriously'''''.
{{-}}

==Collegeville Costumes==
{{anchor|Collegeville}}
[[File:Megatron collegeville costume.jpg|thumb|<insert questionable joke about package description here>]]
*'''Megatron''' (1984)
:Although [[Collegeville Costumes]] only released a small number of Transformers [[Halloween]] costumes, and made some odd choices for characters to depict in the process, Megatron was an obvious choice as one of their first releases. The costume consists of a thin plastic facemask based directly on the original Megatron toy's head, and a red and white plastic smock decorated not with the details of Megatron's body, but with his [[package art]] and the Transformers logo.
{{-}}

==Spindex Corporation==
[[File:Spindex megatron stationery.jpg|thumb|upright=1.66]]
*'''Megatron''' (eraser set, 1985)
:This two-pack of erasers from [[Spindex Corporation]] depicted Megatron in his robot and gun modes.
*'''Megatron''' (Character eraser, 1985)
:One of three different "character erasers" produced by Spindex, this small Megatron figurine came on either a red or purple blister card.
*'''Optimus Prime and Megatron''' (Pencil Toppers and Pencil, 1985)
:Small rubber figurines of Megatron and Optimus Prime came packaged with a pencil they could perch on the end of.
{{--}}
==Transformers Milk Caramel==
[[File:TFcaramel megatron.jpg|thumb]]
*'''Megatron''' (1985)
:A soft rubber figurine—known in Japan as a ''keshigomu''— of Megatron was released as part of the second wave of [[Kabaya]]'s ''[[Transformers Milk Caramel]]'' [[candy toy]] range. He came packaged with chocolate-covered caramel candies, and was available in red, blue and yellow.
{{-}}

==Transformers Gum==
[[File:TFGum megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (1985)
**''Accessories:'' High-density infra-red laser cannon
:A snap-together transformable model kit of Megatron was available as part of the second wave of Kabaya's ''[[Transformers Gum]]'' line. Essentially a downsized version of his original toy, the kit was made out of grey and black plastic, featuring stickers for detail, and came with a stick of gum. Like the original Japanese release of his toy, Megatron lacks his fusion cannon, armed merely with his infra-red laser cannon accessory.
{{-}}
==Hero Set==
[[File:HeroSet megatron keshi.jpg|thumb|upright=1.66]]
*'''Megatron''' (1985)
**''ID number:'' '''16'''
**''Accessories:'' Sword, high-density infra-red laser cannon
:A large ''keshigomu'' of Megatron was produced by TakaraTomy licensee [[Maruka Toys]]. Packaged on a blister card, the static, unposeable Megatron figure came with removable laser cannon and sword accessories, and featured a few small stickers for colour and detail. Maruka also produced an Optimus Prime figure in the same scale, and both Megatron and he were available in red, yellow or green.
{{-}}

==Decoy==
*'''Defeat Dinosaurer Strategy Game''' (board game, 1986)
*'''Destron Hero Collection 22''' (multi-pack, 1986)[[File:Decoy megatron.jpg|thumb]]

:Megatron was among the many characters rendered by [[TakaraTomy|Takara]] as part of their series of 1.5" ''keshigomu'' figurines. Like all the Decepticons in the series, Megatron was molded in soft purple rubber, and featured a number sculpted into his back that was the sum total of his [[Tech Spec]]s, for use in the various games that could be played with the figurines. As the figure is a Japanese creation, it's particularly notable for the fact that it lacks Megatron's signature fusion cannon, just as his original Japanese toy release did, instead sculpting him with his hand-held laser cannon and Japanese-exclusive sword.

:Megatron was available as part of a 22-piece box set of Decepticon figures, as well as being included as one of several possible random Decepticon figures included as playing tokens with the "Defeat Dinosaurer Strategy Game", and in a variety of different colours via "gachapon" capsule machines. Later, [[Seven]] made him available in a peach coloration, randomly included in a variety of multi-packs.

*'''Megatron''' (1987)
**''Decoy number:'' '''32'''

: The figurine was later brought over to [[Hasbro]] markets as part of the [[Decoy]] promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (32, in Megatron's case). Like all Decepticon Decoys, he was a randomly-chosen pack-in available with the carded [[Throttlebot]]s, [[Aerialbot (G1)|Aerialbots]], [[Protectobot (G1)|Protectobots]] and [[Technobot (G1)|Technobots]], and was, very early on in the promotion, available in an alternate red coloration that was only packed in with the Throttlebots. Unsurprisingly, this red figurine is much rarer.

::*''[http://www.tfu.info/1986/Decepticon/Decoys/Megatron/megatron.htm More information on Decoy Megatron at TFU.info]''

==Parody Deformed==
[[File:PDtype megatron.jpg|thumb]]
*'''Megatron''' (1990)

:A small non-transforming [[super deformed]] model kit of Megatron was available as part of Kabaya's "[[Parody Deformed]]" line of candy toys. The third figure in the series, Megatron was part of the larger class of kits, and as such is made from three colors of plastic (white, grey and blue) with eye and Decepticon symbol stickers for detail. He came with a "[[PDTF Comic]]" comic about himself—"Don't Cry! Megatron!!"—and a stick of chewing gum.
{{--}}

==''Generation 2''==
[[File:G2Megatron watch.jpg|thumb|upright=1.66]]
*'''Megatron Watch''' (Watch, 1995)

: A non-transforming digital wristwatch of Megatron's tank mode manufactured by [[Ostrum International]] was released during ''Generation 2'', in the same green and purple coloration as his first ''Generation 2'' toy.
{{--}}

===LALA===
*'''Megatron''' (1997)
:Released by [[ToonTown]] licensee LALA, this eraser also doubles as a small simple model kit, with his large colored bits being the "eraser" portion and the remainder of the toy being constituted of grey plastic parts that are assembled together. He transforms from robot to vehicle and back by [[Partformer|partforming]] his individual components.

:Although the promotional material for these releases feature his eraser bits in pink, it is possible that he might have also been released in bright green, as other LILA erasers that also show up as pink in promotional images have been found with this color instead.
{{-}}

==Choro-Q==
[[File:ChoroQ megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (2000)

:''[[Choro-Q]]'' Megatron is a ''Generation 2''-themed [[redeco]] of the Camouflage Tank toy from Takara's ''Choro-Q'' toyline of non-transforming super deformed vehicles. He was an [[exclusive]] at [[BotCon]] Japan 2000, and features a [[pull-back motor]] and a rear license plate that reads "BotCon Japan 2000".

:Along with ''Choro-Q'' [[Optimus Prime (G1)/merchandise|Optimus Prime]] and [[Mirage (G1)|Ligier]], Megatron was given out randomly to convention attendees. Each toy was limited to 1000 pieces.
{{-}}

==Super Collection Figure==
[[File:SCF Megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

: A three-inch tall [[plastic|PVC]] figurine of Megatron was available as part of the first wave of [[TakaraTomy|Takara]]'s ''[[Heroes of Cybertron|Super Collection Figure]]'' line. Like all the figures in the wave, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve [[blindpacking|blindpacked]] figures.

{{-}}{{anchor|SCFmace}}
[[File:SCF Megatron chase mace.jpg|upright=1.66|thumb]]
*'''Megatron with Chain Weight''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

:Also available in the first ''Super Collection Figure'' wave was a rare "[[Chase figure|chase]]" version of the Megatron (分銅付きメガトロン, ''fundō-tsuki megatoron''), decorated in metallic paint and replacing his right hand with his energon flail.

: It was ''presumably'' released at a ratio of one per every ten cases; while this has not been officially confirmed, later waves gave these odds for Secret Figures. It is also ''presumed'' to have replaced the regular Megatron in the lucky case (color or clear, well, that's less certain).

{{-}}{{anchor|SCFchaseConvoy}}
[[File:SCF Optimus chase jetpack.jpg|upright=1.66|thumb]]
*'''Megatron & Convoy''' (2000)
**''Act'': '''2'''
**''Accessories'': Stand

: The second ''Super Collection Figure'' wave featured an Optimus Prime chase figure wielding Megatron in gun mode and wearing [[Sideswipe (G1)|Sideswipe]]'s [[jet pack|rocket pack]] (the latter seen in the [[The Transformers (cartoon)|original ''The Transformers'' cartoon]] episode "[[More than Meets the Eye, Part 3]]").

: It was ''presumably'' released at a ratio of one per every ten cases. It is unknown what figure it replaced in the lucky case.

{{-}}{{anchor|SCFreincarnation}}
[[File:SCF Megatron Reincarnation.jpg|upright=1.66|thumb]]
*'''Reincarnation Megatron''' (2001)
**''Act'': '''3'''
**''Accessories'': Stand

:Megatron got another chase figure in the third ''Super Collection Figure'' Act. Based on the scene in ''[[The Transformers: The Movie]]'' where Megatron is reincarnated as [[Galvatron (G1)|Galvatron]], "Reincarnation Megatron" (転生メガトロン ''tensei megatoron'') is cast in transparent plastic with a light purple hue and gold sparkles inside, and given grid patterns on his lower body. It was presumably packed at a ratio of one per ten cases.

:It needs to be noted that there are a significant number of [[knockoff|bootlegs]] of this figure. Thankfully, most have a very obvious tell: the real figure has a white Decepticon symbol, while the knockoffs have a purple symbol.

{{-}}{{anchor|SCFLaserbeak}}
[[File:SCF Megatron Laserbeak.jpg|upright=1.66|thumb]]
*'''Megatron (B)''' (2001)
**''Act'': '''4'''
**''Accessories'': Stand

:For the fourth ''Super Collection Figure'' wave, Megatron's left arm was changed to feature [[Laserbeak (G1)|Laserbeak]] perching on it. His feet have also been painted bright white rather than the body-matching light gray of the original. Like all the figures in the fourth wave, Megatron was available in both standard full color and metallic silver "pewter" versions, one of each of which was available in a standard case of twelve [[blindpacking|blindpacked]] figures.

:The pewter version of the figure has a potential problem with connector peg breakage, due to said pegs often getting a layer of pewter paint before being forced into a socket, leading to sticking and tearing. Care should be used when moving or removing the arms; shaving down the socket interior with a thin hobby knife is usually sufficient to fix the issue. This holds true for pretty much every pewter figure in the entire line.

:In eight out of every ten cases, the pewter version of Megatron came packaged with the right arm of the collectible [[Metroplex (G1)#Super Collection Figure|Metroplex]] build-a-figure.

{{-}}{{anchor|Act6Convoy}}
[[File:SCF Optimus Act6.jpg|upright=1.66|thumb]]
*'''Convoy (C) with Megatron Gun Mode''' (2002)
**''Act'': '''6'''
**''Accessories'': Right fist, stand

:The sixth ''Super Collection Figure'' wave featured a [[retool]]ed version of Prime wielding Megatron's gun mode, now sold at mass-retail rather than being a chase figure. Unlike the chase one, Prime also came with an interchangeable empty fist, so he doesn't ''have'' to wield Megatron. His right arm has also been tooled to be straight-elbowed, and his left hand is now clenched. The figure was available in both full color and pewter versions in a 1:1 ratio per case.

:In eight out of every ten cases, the pewter version came with the head for the wave's [[Grand Maximus#Super Collection Figure|Grand Maximus]] build-a-figure.

{{-}}{{anchor|ConvoySet}}
[[File:SCF Optimus Earth Obliteration.jpg|thumb|upright=1.66]]
*'''Special "The Earth Obliteration Plan": Exclusive Convoy Set''' (2002)
**''Accessories'': Stand

: Available exclusively at the Wonder Festival convention, this set includes two metallic-paint versions of Convoy figures from Act 2: the "Convoy w/ Megatron Gun" chase figure (minus the jetpack), and the truck-mode "figure".

: The set was limited to only 1000 units.

{{-}}{{anchor|ConfrontationSet}}
[[File:SCF Megatron Confrontation.jpg|thumb|upright=1.66]]
*'''TF Confrontation Set 01: Convoy vs Megatron''' (2002)
**''Accessories:'' Energon mace

: Exclusive to the Tokyo Game Show 2002, this special set includes a new version of the original first-Act Megatron figure, along with a new version of the first-Act Optimus. Both are cast in transparent plastic and completely painted over in a grimy, battle-damaged look. Both also come with the interchangeable energon-axe and mace weapons from their first-wave chase figures. Completing the theme of the set is the backdrop of the packaging interior, which depicts [[Sherman Dam]].

: As with the Wonder Festival set, this set was also limited to 1000 units.
{{-}}

==Mega Super Collection Figure==
[[File:MegaSCF megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (2002)
**''ID number:'' '''03'''
**''Accessories:'' Fusion cannon, energon mace, Laserbeak, two clenched fists, two open hands
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

:A five-inch tall, non-transforming highly-articulated PVC figure of Megatron was the third entry in Takara's ''Mega Super Collection Figure'' series. He comes with a small PVC of Laserbeak that can perch on his arm, and his fists can be swapped out for alternate splayed-palm hands, or his energon mace, as seen in the Generation 1 cartoon.

{{anchor|MSCFmetallic}}
*'''Megatron Metallic Ver.''' (Exclusive, 2002)
**''ID number:'' '''03-X1'''
**''Accessories:'' Fusion cannon, energon mace, [[Buzzsaw (G1)|Buzzsaw]], two clenched fists, two open hands
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

:A metallic redeco of ''Mega SCF'' Megatron was offered as an exclusive at the 2002 Japanese conventions, Hobby Expo and Wonderfest. He comes with all the same accessories as his standard release, except for this exclusive, Laserbeak has been redecoed into Buzzsaw.
{{--}}[[File:MegaSCF megatron guns.jpg|thumb|upright=1.66]]

{{anchor|MSCFConvoy}}
*'''Convoy Metallic Ver.''' (2002)
**''ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
:A gun mode Megatron came as an accessory with the metallic redeco of the Optimus Prime ''Mega SFC'' figurine, taking the place of the [[energon-axe]] weapon included with the original Prime figure. Prime's hand is permanently sculpted around Megatron's handle, and can be swapped out for Prime's other hands.

{{anchor|MSCFStarscream}}
*'''Starscream''' (2002)
**''ID number:'' '''07'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
:Optimus Prime's Megatron gun accessory was redecoed for inclusion with ''Mega SCF'' Starscream; while Megatron himself remained the same, the fist was repainted from Prime's metallic dark blue to Starscream's lighter shade.
{{--}}

==Heroes of Cybertron==
[[File:HOC Megatron.jpg|upright=1.66|thumb]]
*'''Megatron''' (2002)

: Part of the first wave of ''[[Heroes of Cybertron#Heroes of Cybertron|Heroes of Cybertron]]'', this figure is functionally the same as the first ''Super Collection Figure'' Megatron. Like all the standard ''Heroes'' figures, he is cast in transparent plastic, then painted over, save for the eyes and a small patch on the back of his head, giving him a [[light-piping]] gimmick. However, there are a few other tiny deco differences, most importantly (and noticeable) being the addition of a black circle on the muzzle of his back-mounted gun barrel, and the back of his midsection is painted light gray rather than red like the ''SCF''. He's also a cooler super-light-gray than the ''SCF'' figure.

: There is a [[variant|running change variant]] of this figure, which adds a bit of red paint to the raised bit on the back of Megatron's fusion cannon, a detail from the animation model missing from the ''SCF'' Megatrons.

: Megatron was re-released in 2006 as part of a short-lived ''Heroes of Cybertron'' revival, celebrating the 2006 DVD release of the original ''[[The Transformers: The Movie]]''. This version was cast in opaque off-white plastic and is virtually identical to the original ''SCF'' Megatron, with the unpainted back-barrel and red-painted mid-back. At best, in certain lights the 2006 ''Heroes'' version is an ever so slightly warmer light gray plastic than the ''SCF''.

::*''[http://www.tfu.info/2002/Decepticon/HoCMegatron/megatron.htm More information on ''Heroes of Cybertron'' Megatron at TFU.info]''

{{-}}{{anchor|HOCmace}}
[[File:HOC Megatron Mace.jpg|upright=1.66|thumb|All flail Megatron]]
* '''Megatron''' (2002)

: Released in the second wave, this version of Megatron is a mass-release variation of the chase figure from the first ''SCF'' Act, replacing his right hand with a clear-plastic energy flail. His left hand is the clenched fist of the later "Laserbeak" version of Megatron, instead of the open-hand the chase figure had. This version also keeps the paint additions from the previous version of the figure, always having the red-dotted cannon.

: Oddly, he comes with the same collector card as the first version, and the packaging does not call out the energy weapon in any way. The card-back cross-sell even shows only the original Megatron. (The same happened to this wave's energy-weapon-wielding [[Optimus Prime (G1)/merchandise#Heroes of Cybertron|Optimus Prime]].)

::*''[http://www.tfu.info/2002/Decepticon/HoCMaceMegatron/megatron.htm More information on ''Heroes of Cybertron'' Megatron (with mace) at TFU.info]''

{{-}}{{anchor|HOCLaserbeak}}
[[File:HOC Megatron Laserbeak.jpg|upright=1.66|thumb|Give us a kiss.]]
* '''Megatron with Laserbeak''' (2003)

: The fifth-wave Megatron figure is a release of the Megatron/[[Laserbeak (G1)/toys#Heroes of Cybertron)|Laserbeak]] figure from the fourth ''SCF'' Act. He keeps the paint alterations of the energy-mace Megatron, though his black paint is much glossier this time around. Laserbeak's grays are also much lighter than on the SCF, matching Megatron's main body coloring.

: The collector card does not list Laserbeak on the front, but does mention him at the end of a severely truncated version of the first card's [[bio]].

: This release came with the right arm for the wave's collectible [[Metroplex (G1)#Heroes of Cybertron|Metroplex]] build-a-figure.
{{-}}

==Hard Hero==
[[File:HardHero Megatron bust.JPG|thumb|Englishmen, you're all so f@#$ing pompous. None of you have got any balls...[[Edmund Burton|wait a minute.]]]]
*'''Megatron''' (2002)
:The second of [[Hard Hero]]'s series of ''Transformers'' products, Megatron is a six-inch tall bust sculpted from cold-cast porcelain.
{{-}}
[[File:HHero MegatronStatue.jpg|thumb|People can pay retail for a [[Thrust (G1)#Generations|Thrust]] now!?!]]
*'''Megatron''' (2003)
:A 12.5-inch tall Megatron statue sculpted aiming his fusion cannon while screaming in rage.
{{-}}

==MyClone==
[[File:Myclone megatron.jpg|thumb|upright=1.66]]
* '''Megatron''' (MyClone, 2003)
**''ID number:'' '''MTF002'''
**''Accessories:'' Grey display base
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

:Released in the first wave of the ''[[MyClone]]'' line of Transformers PVC figures, this super deformed Megatron comes with a hexagonal grey display stand, which can link up with the identical stands included with other MyClone figures. His modular design allows his parts to be mixed and matched with those of any other MyClone figure.

* '''Megatron''' (MyClone, 2003)
**''Accessories:'' Clear display base, energon mace
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

: A [[chase figure|chase]] variant of ''MyClone'' Megatron was also available in the same wave. Cast entirely in colorless clear plastic, this version of Megatron also came with an energon mace, which could be exchanged for his fist. Thanks to the modular MyClone design, the mace can easily attach to the standard Megatron figure as well.
{{-}}

==Q-Robo Collection==
[[File:Qrobo megatron.jpg|thumb]]
*'''Megatron''' (2003)

:A super-deformed PVC of Megatron was released as part of the ''[[Q-Robo Collection]]''. Like all the figures in the series, Megatron was sold blindpacked in a plastic capsule, featured articulation in the neck and shoulders, and was also available in a translucent colored plastic: as a Decepticon, Megatron came in translucent purple.

::*''[http://snakas.web.fc2.com/figure/q_robo1.htm More information on the Q-Robo Collection at Autobase Aichi]''
{{-}}

==Generation 1 Figure-Collection==

[[File:Bottlecap megatron.jpg|thumb|upright=1.66]]

*'''Megatron''' (2003)
**''Japanese ID number:'' '''D-1'''
**''Accessories:'' Display base

:At only one inch in height, this Megatron "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's Transformers [[Generation 1 Figure-Collection]]. The figure was available in both a "retro" black and white color scheme and a rare full-color [[chase figure|chase]] version, and came with a leaflet, personalized with cartoon screen captures.
::*''[http://snakas.web.fc2.com/misc_item/kabaya_bottle.htm More information on the Generation 1 collection at Autobase Aichi]''
{{--}}
==History Collection==
[[File:History collection megatron.jpg|thumb|100px]]
*'''Megatron''' (2004)
**''Accessories:'' Display base

:A second "bottlecap" figurine of Megatron was produced by Takara as part of their blindpacked [[History Collection]] line of PVCs. Despite its diminutive size, this two-piece full-color figure features articulated shoulders.

::*''[http://tfkenkon.com/collection/act234/ More information on the History Collection at TFKenkon.com]''
{{--}}

==Palisades Toys==
[[File:Palisades Megatron.jpg|thumb|upright=1.66|Megatron after getting pushed down a flight of stairs by [[Skywarp (G1)|Skywarp]].]]
*'''Megatron''' (statue, 2004)
:A twelve-inch tall polystone statue of Megatron was produced by [[Palisades Toys]] as the logical second entry in their line of Transformers statues. Standing on a thick base formed from a silver Decepticon insignia, Megatron is decorated with dirt to simulate battle damage, and features articulation at and his neck and shoulders, allowing owners to position him with fusion cannon ready to fire. Megatron was limited to 1000 pieces worldwide.
::*''[http://www.tfw2005.com/transformers-images/toys/Non-Transforming+Transformers/Misc/Transformers+Busts+and+Statues/Palisades+12+Megatron+Statue/ Megatron statue gallery at TFW2005.com]''

* '''Megatron''' (mini-statue, 2005)

:A downscaled version of the Megatron statue, essentially identical to the larger one but for the fact that it's only six inches tall, was produced as an [[exclusive]] for [[San Diego Comic-Con]] 2005. With only 500 units produced, the statue sold out in two days, setting a new record for Palisades at the show.
{{-}}

==First 4 Figures==
[[File:First 4 Figures Battlefield Optimus vs Megatron.jpg|thumb|upright=1.66]]
*'''Optimus Prime vs Megatron''' (2006)
**''Accessories:'' extra head for Megatron (with detachable helmet), extra hand for Optimus Prime
{{toydesigner|[[Little IroN]] (concept artist), [["Mad" Alterton]] (sculptor), [[Leandro Sivori]] (painter)}}

:The first entry in the ''Transformers Battlefield'' line by model company [[First 4 Figures]], this 13-inch tall diorama depicts Optimus Prime slugging it out with Megatron. Megatron comes with a "REP" (Replaceable Exterior Part) of a battle damaged version of his head, which features a detachable "helmet" to show off his exposed robo-brain. Optimus is posed as though doing a shoulder shove while holding his ion blaster, but a provided REP hand allows buyers to instead recontexualise the pose as a spinning backhand slap.

:The model was limited to 1,850 pieces worldwide, and came with a numbered certificate of authenticity, which allowed buyers to reserve the same number on their next purchase in the series. It also came with an A4 mini-poster depicting the same fight between Optimus and Megatron by artist [[Little IroN]], which was also sold separately as a limited edition A2 poster.

:As a ''Transformers Battlefield'' release, this model featured a detailed base designed to interlock with others in the same range to create a massive battle diorama. Unfortunately, a general discontinuation of First 4 Figures' ''Transformers''-related output put the kibosh on any further ''Battlefield'' models.
{{-}}

==Diamond Select==

* '''Decepticon Motion Globe''' (Snow globe, 2007)
[[File:Diamond select megatron products.jpg|thumb|upright=1.66]]
:Megatron is featured in [[Diamond Select Toys]]' Decepticon-themed snow globe, sitting on a throne inside the globe whilst pointing with one hand and holding an [[energon cube]] in the other. The globe's base is based on [[Decepticon Headquarters (G1 Earth)|Decepticon Headquarters]] from the [[The Transformers (cartoon)|original ''The Transformers'' cartoon]]. It was sculpted by [[Art Asylum]], and limited to 1000 pieces.

* '''Megatron Mini Head Replica''' (Bust, 2007)
:This small statue of Megatron's head designed by Art Asylum stands at roughly five inches tall, and was limited to 2500 pieces.

* '''Megatron Wall Statue''' (2007)
:Standing at nine inches tall and limited to 1000 pieces, this statue of Megatron is a free-standing diorama that attaches to the owner's wall, complimenting Art Asylum's Optimus Prime wall statue.
{{--}}
[[File:Diamond select megatron busts.jpg|upright=1.66|thumb|Wonder if they used his legs to make another [[Alligaticon]]?]]
* '''Megatron Bust''' (2008)

:Released by Diamond Select Toys in 2008, this Megatron mini-bust was sculpted by Mark Wong of Art Asylum and limited to 1,500 pieces. The sculpt features a Megatron, looking regal in metallic silver, perched above a raised Decepticon symbol while the front of the bust showcases the [[Heart of Cybertron]] as seen in the Generation 1 episode "[[Microbots]]".

* '''Megatron Reformatted Bust''' (Action Figure Xpress exclusive, 2008)

:The Megatron bust was retooled for its second release as "Megatron Reformatted", exclusively availably through Action Figure Xpress, depicting the Decepticon leader in the beginning stages of his reformation into Galvatron as featured in ''The Transformers: The Movie''. In addition to his new partially-translucent appearance and battle-damage paint detail, this version of the bust features a new head and a new base in the shape of [[Unicron]].

* '''G1 Animated Megatron Bust''' (San Diego Comic Con exclusive, 2009)
:Mark Wong's Megatron bust was retooled a third time to create "G1 Animated Megatron", available exclusively at the 2009 San Diego Comic Con. In addition to his reinstated Heart of Cybertron base, Megatron features a new head and a more matte color scheme to better match the cartoon's palette.
{{--}}
[[File:DiamondSelect Megatron bustbank.jpg|thumb]]
*'''Megatron Bust Bank''' (Diamond Select, 2010)

:This 6-inch hollow Megatron bust would have featured plenty of space for coins along with articulation in its shoulders and neck, but was sadly canceled.
 
{{canceledtoy}}
{{-}}

==Attacktix==
*'''Megatron''' (Booster, 2007)
[[File:Attacktix Megatron.jpg|thumb|How am I supposed to aim with this thing in the way?]]
{{attacktix
|ID=TF2-20
|faction=Decepticon
|class=Leader
|special=Recover - 16/26 (61%) success ratio
|cost=40
|speed=6
|attacktype=Shooter (Force Blast)
}}
{{-}}
:Based on his G1 cartoon appearance, this Megatron toy is a killer. He was available only in the Series 2 Starter Set along with ''[[The Transformers (franchise)|Generation 1]]'' [[Optimus Prime (G1)/merchandise#Attacktix|Optimus Prime]], ''[[Transformers: Energon (franchise)|Energon]]'' [[Landquake (Energon)#Attacktix|Landquake]] and ''[[Transformers: Cybertron (franchise)|Cybertron]]'' [[Skywarp (Armada)#Attacktix|Skywarp]].

:Megatron has an incredibly powerful translucent missile (don't fire it at children or small dogs if you value their lives) and a ''Recover'' special power that allows the figure to stand back up if there's another Decepticon in play. Two Megatrons are a dangerous combination, feeding each other's recover powers and making them very hard to kill off. Plus you can pretend one of them is [[Straxus (G1)|Straxus]].

:As an added bonus, because of the way it is worded, you can use the ''Cybertron'' [[Megatron (Armada)/merchandise#Attacktix|Megatron]] vehicle mode figure's ''Transform'' power to bring Megatron into play from your back-ups.

::*''[http://www.tfu.info/2007/Decepticon/AttacktixMegatron/megatron.htm More information on ''Attacktix'' Megatron at TFU.info]''
{{-}}

==''Robot Heroes''==
[[File:Robot heroes megatrons.jpg|upright=1.66|thumb|Cuteness through tyranny!]]
*'''Ultra Magnus & Megatron''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|Marcelo Matere]] (concept artist)}}

:''[[Robot Heroes (toyline)|Robot Heroes]]'' Megatron is an adorably super-deformed figurine depicting the Decepticon leader aiming his fusion cannon with a great big smile on his mouth. Megatron has swivel articulation in his shoulders and was sold in a two-pack with [[Ultra Magnus (G1)/merchandise#Robot Heroes|Ultra Magnus]].
::*''[http://www.tfu.info/2007/Decepticon/RHMegatron/megatron.htm More information on Robot Heroes Megatron at TFU.info]''

{{anchor|RHBlindpack}}
*'''Megatron''' (Single-pack, 2008)

: In some countries outside of North America, Megatron was released individually in a blindpack with no notable changes.

{{anchor|RH5pack}}
*'''Decepticon Sneak Attack''' (Multi-pack, 2007)

: "Megatron with Supermetal Finish" is a redeco of the standard ''Robot Heroes'' Megatron, colored a shiny silver instead of off-white.

: He was only available in a [[Walmart]] exclusive five-pack alongside [[Mirage (G1)/toys#RH5pack|Hologram Mirage]], [[Cliffjumper (G1)/toys#Robot Heroes|Cliffjumper]], "Supermetal Finish" [[Optimus Prime (G1)/merchandise#RH5pack|Optimus Prime]], and [[Skywarp (G1)/toys#Robot Heroes|Skywarp]].

::*''[http://www.tfu.info/2007/Decepticon/RHWMMegatron/megatron.htm More information on Supermetal Finish Megatron at TFU.info]''
{{-}}

==Sota Toys==
*'''Transformers Chess Set''' (<s>2007</s>)
:A Megatron piece was to be the Decepticon-side King on a [[Chess#Sota Toys|chess set]] based on Generation 1, but the set apparently never saw release.
{{canceledtoy}}
{{-}}

==''Titanium Series''==
[[File:Titanium cancelled figure checklist.jpg|thumb|upright=1.67]]
*'''War Within Megatron''' (unreleased)
:*''Accessories:'' Decepticon stand?
:The final ''[[Titanium Series]]'' catalogue listed a number of "Micro Figures" intended for release, though many of them never saw the light of day. Among those listed was "War Within Megatron", which was presumably supposed to be a new 3" Robot Masters mold based on the character's appearance in the ''[[War Within (comic)|War Within]]'' comics, probably including a stand in the shape of a Decepticon badge.
{{canceledtoy}}
{{--}}

==Revoltech==
[[File:Revoltech Megatron.jpg|thumb|Action Masters? Eat your Spark out!]]
*'''Megatron''' (2007)
**''Yamaguchi Series number:'' '''025'''
**''Accessories:'' Alternate head, 3 alternate hands (left & right open palms, right gun-holding hand)

:A non-transforming but ''highly'' articulated Megatron action figure(ine), ''[[Revoltech]]'' Megatron uses the ''Revoltech'' "revolver joints" (appropriate, if you think about it...) for maximum poseability. Megatron includes a non-removable fusion cannon and a few alternate hands, as well as an alternate head with its mouth open in either a smirk, growl or sneer, [[Dull surprise|depending on how you read it]]. His sculpting is explicitly in the style of [[Pat Lee|Pat "serfdom" Lee]]'s interpretation of Megatron.

:This figure uses specialized gray revolver joints in order to better blend with the surrounding sculpted parts.

:He includes a hand obviously meant for holding a gun... but has no gun to use it with. Though if you buy ''Revoltech'' Starscream as well, you can always make him wield himself.
{{-}}

[[File:Revoltech Megatron gun.jpg|thumb]]
*'''Starscream''' (2008)
**''Yamaguchi Series number:'' '''046'''

:The [[Starscream (G1)/toys#Revoltech|''Revoltech'' Starscream]] toy included a Megatron accessory in his Walther P-38 altmode. While the silencer and scope are molded on, the stock is removable (necessary in order to plug it into a hand). The gun can be held by any ''Revoltech'' toy with a standardized gun-wielding hand, which includes all five Transformers characters in the line.
{{-}}

==Boss Coffee==
[[File:Boss coffee megatron.jpg|thumb]]
*'''Megatron''' (2008)

:A non-transforming PVC figure of Megatron was released as part of a promotion by [[Boss Coffee]]. The small figure was randomly included with single cans of the company's "Rainbow Mountain Blend" coffee, contained in a plastic capsule affixed to the top of the can which then became a display base for the figurine once removed. Megatron features articulation at the shoulders and waist and came with a small catalog leaflet that could be folded up and attached to the lid/base to form a diorama background of Decepticon Headquarters for added display value.

:Due to his size, Megatron hypothetically scales with ''Encore'' [[Metroplex (G1)#Encore|Metroplex]].

*'''Megatron''' (2008)

:A larger, metallic gold version of Megatron was also part of the promotion. Nearly twice as tall as the smaller figure, it was not merely an upsized version, but an entirely different sculpt. This Megatron was randomly included with two-packs of Rainbow Mountain Blend coffee cans, which featured a double-wide plastic capsule to hold him.
{{-}}

==''Mighty Muggs''==
[[File:MightyMuggs Megatron.jpg|thumb]]
*'''Megatron''' (2009)
**''Accessories:'' Fusion cannon

: This super-deformed, non-transformable Megatron figure uses the standard ''[[Mighty Muggs]]'' body template, with swivel joints in his neck and limbs. He comes with a similarly super-deformed version of his fusion cannon that fits into a hole on his right arm.
{{-}}

{{anchor|2018mightymugg}}
[[File:MightyMuggs 2018 Megatron.jpg|thumb|upright=1.44]]
*'''Megatron''' (2018)
**''ID number:'' '''02'''

: Part of the first year of the ''Mighty Muggs'' relaunch, Megatron features the new line-wide face-changing [[gimmick]]. Pressing down on his bucket helmet will switch his face to one of three options: neutral, angry, and [[The Transformers: The Movie|"I still function!"]] The toy is based on Megatron's [[evergreen]] design, and includes a matching fusion cannon molded onto his right arm.
{{-}}

==Transformers Wacky Wobblers==
[[File:WackyWobblers Megatron.jpg|thumb|upright=0.85]]
*'''Megatron''' (2009)

: This Megatron {{w|bobblehead}} is part of the popular ''[[Wacky Wobblers]]'' line produced by {{w|Funko}}. Aside from the standard-issue big wobbling head, he features a teeny-tiny fusion cannon and arms that swivel at the shoulders. Megatron is affixed to a base with his name on it.
{{-}}
==Transformers x Mimobot==
[[File:Mimobot megatron.jpg|thumb|upright=1.66|Peace through Storage!]]
*'''Megatron Mimobot''' (Mimoco, 2011)
:Produced by [[Mimoco]] as part of their multi-brand line of designer USB "Mimobot" flash drives, this Megatron memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.
{{-}}

==Cuponk==
[[Image:NYCC2011 Cuponk.jpg|thumb|250px|Not for use with liquid, so you can't get [[Microbots|get drunk on Energon]].]]
*'''Transformers Cuponk''' (2011)
:A New York Comicon exclusive, this set includes two Cuponk cups and 6 ping pong balls. Megatron is featured on one cup and one ping pong ball. The same cup also features [[Starscream (G1)|Starscream]], [[Soundwave (G1)|Soundwave]], [[Devastator (G1)|Devastator]], and the [[Autoscout]].
{{-}}

==Titan Warriors==
[[File:TitanWarriors Megatron.jpg|thumb]]
*'''Titan Warrior 5-Pack''' (2013)
:Available at [[San Diego Comic-Con]] 2013, this Megatron is a 6" PVC ''[[Titan Heroes|Titan Warriors]]'' figure (similar to Bandai's ''Ultra/Sentai/Rider Hero, Movie Monster Series'') with articulated arms. He was packed with [[Optimus Prime (G1)/merchandise#Titan Warriors|Optimus Prime]], [[Grimlock (G1)/toys#Titan Warriors|Grimlock]], [[Starscream (G1)/merchandise#Titan Warriors|Starscream]] and [[Soundwave (G1)/merchandise#Titan Warriors|Soundwave]].

*'''Megatron''' (Titan Warrior, 2014)
:The ''Titan Warriors'' Megatron toy was released individually, under the ''[[Beast Hunters (toyline)|Beast Hunters]] Titan Heroes'' subline.
{{-}}

==''The Loyal Subjects''==
*'''Megatron''' (2013)
{{charstubtoys}}
{{anchor|The Loyal Subjects Cybertron}}
*'''Cybertron Megatron''' (2013)
{{charstubtoys}}
{{anchor|The Loyal Subjects Metallic}}
*'''Metallic Megatron''' (2013)
{{charstubtoys}}
{{anchor|The Loyal Subjects Midnight}}
*'''Midnight Cybertron Megatron''' (2013)
{{charstubtoys}}
{{-}}

==Mecha Nations==
[[File:Mn02-blackconvoy-megs.jpg|thumb]]
*'''Black Convoy''' (2014)
**''ID Number:'' '''MN02'''
**''Accessories:'' Ion Blaster, Energon Axe, Removable Armor, Megatron gun, alternate hands.

:A small gun mode version of Megatron, similar to [[Megatron (G1)/toys#20th Anniversary/Masterpiece|those included with]] ''Masterpiece'' Soundwave and the original ''Masterpiece'' Optimus Prime/Convoy mold, was added to [[Kids Logic]]'s [[Nemesis Prime (G1)#Mecha Nations|Black Convoy]] redeco (and insignia-remold) of Mecha Nations [[Optimus Prime (G1)/merchandise#Mecha Nations|Optimus Prime]]. It includes light up effects, gun barrel that can be replaced with a barrel extension, and removable stock. To hold the gun, Black Convoy includes an additional specifically molded right hand, however the stock must be removed to allow him to do so.

:The Megatron gun was also included with Mecha Nations Starscream (below). Mecha Nations [[Ultra Magnus (G1)/merchandise#Mecha Nations|Ultra Magnus]], like Optimus Prime before him, does not include the Megatron gun, keeping this a Decepticon-only accessory.

{{-}}

[[File:Mn03-megatron.jpg|thumb]]
*'''Megatron''' (2014)
**''ID Number:'' '''MN03'''
**''Accessories:'' Energy flail, alternate face, alternate hands, alternate right forearm, display stand.

:Created by [[Kids Logic]], this [[super deformed]] G1 Megatron stands 6" tall and is articulated, featuring a shiny metallic color scheme, removable armor and replacement hands. He also features LED light up eyes, Decepticon chest insignia, and fusion cannon. The set includes an alternate right forearm piece allowing the fusion cannon and the forearm to which it's attached to be removed.

:This figure was redecoed into Mecha Nations Megatron 2014 Toy Soul Exclusive Edition (below).

{{-}}

[[File:Mn03g-goldmegatron.jpg|thumb]]
*'''Megatron (2014 Toy Soul Exclusive Edition)''' (2014)
**''ID Number:'' '''MN03G'''
**''Accessories:'' Energy flail, alternate face, alternate hands, alternate right forearm, display stand.

:Created by [[Kids Logic]], this [[super deformed]] G1 Megatron is a redeco of their previous Megatron figure (above), based on the color scheme of ''Masterpiece'' [[Megatron (G1)/toys#MasterpieceGoldMegs|Megatron Gold Ver]]. He stands 6" tall and is articulated, featuring a shiny metallic color scheme, removable armor and replacement hands. He also features LED light up eyes, Decepticon chest insignia, and fusion cannon. The set includes an alternate right forearm piece allowing the fusion cannon and the forearm to which it's attached to be removed.

:This figure was exclusive to 2014's Toy Soul expo, an event run annually in Hong Kong.

{{-}}

[[File:Mn05-starscream-megs.jpg|thumb]]
*'''Starscream''' (2015)
**''ID Number:'' '''MN05'''
**''Accessories:'' Megatron gun, alternate hands, display stand.

:Mecha Nations [[Starscream (G1)/merchandise#Mecha Nations|Starscream]] includes the same gun mode Megatron (above) as introduced with Black Convoy. A specially molded hand allows Starscream to hold Megatron for posing.

:Starscream was subsequently redecoed with new faces into Mecha Nations [[Skywarp (G1)/toys#Mecha Nations|Skywarp]] and [[Thundercracker (G1)/toys#Mecha Nations|Thundercracker]], but neither of the later figures included the Megatron gun.

{{-}}
==''Thrilling 30''==
*'''Megatron''' (Collectible Figurine, 2014)
**''Series / Number:'' '''1 / #2'''
**''Accessories:'' Collector's base
:A super-deformed Megatron was released among the blindpacked [[Thrilling 30#Collectible Figurines|''Thrilling 30'' Collectible Figurines]] by [[Goldie Marketing]]. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

*'''Collectible Figurines''' (5-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 5 collector's bases
:The same Megatron figurine was also available in a 5-pack alongside [[Optimus Prime (G1)/merchandise#Thrilling 30|Optimus Prime]], [[Ratchet (G1)/toys#Thrilling 30|Ratchet]], [[Starscream (G1)/merchandise#Thrilling 30|Starscream]] and [[Soundwave (G1)/merchandise#Thrilling 30|Soundwave]].

{{-}}

==Leg Avenue==
{{anchor|LegAvenue}}
[[File:Leg Avenue Megatron.jpg|right|upright=.75|thumb|]]
:Costume and lingerie manufacturer Leg Avenue released an officially licenced Bumblebee costume along side ones for [[Bumblebee (G1)/merchandise#LegAvenue|Bumblebee]] and [[Optimus Prime (G1)/merchandise#LegAvenue|Optimus Prime]].

{{-}}

==D-Style==
[[File:D-Style-Megatron.jpg|thumb|upright=1.66|Multiple faces to convey the various forms of tyranny.]]

*'''Megatron''' (2015)
**''ID number:'' '''44'''
**''Accessories:'' Scowling face, smirking face, shouting face, energon mace, Megatron gun

:A super deformed Megatron model kit was produced by [[Kotobukiya]] as part of their franchise-spanning ''[[D-Style]]'' line. His accessories include three interchangeable face plates, an energon mace and a representation of his gun mode that can be wielded by ''D-Style'' figures.

:There are a fewer paint apps than [[Optimus Prime (G1)/merchandise#D-Style|Optimus Prime]]. The eyebrows, two of the mouths and the silencer on the gun all require painting in black. In a change from the promotional photos opposite, Megatron's feet come in metallic, with the box images showing the center section on the feet highlighted with black.

{{-}}
==D-Collection==
[[File:D-Collection Megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (2015)
**''Accessories:'' Fusion cannon, sword

:[[Kabaya]]'s ''D-Collection'' Megatron is a small super deformed figure that requires some assembly for his arms and features articulation limited to his shoulders. He comes with an attachable fusion cannon and a purple energy sword. Sold blindpacked, Megatron is available as both a standard full color figure and a rare clear plastic version. He comes with chewing gum.

{{-}}
[[File:D-Collection Starscream.jpg|thumb|upright=1.66]]
*'''Starscream''' (2015)
**''Accessories:'' 2 null-ray blasters, Megatron gun

:A gun mode Megatron is included with the ''D-Collection'' [[Starscream (G1)/merchandise#D-Collection|Starscream]] figure as an accessory. The default Starscream comes with a fully painted Megatron, while the one included with the clear plastic version is completely black.

{{-}}

==''Metal Earth''==
[[File:Metal Earth Megatron.jpg|thumb]]
*'''Megatron''' (2015)
**''ID number:'' '''MMS303'''
:''[[Metal Earth]]'' Megatron is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".
{{-}}
[[File:Metal Earth Legends Megatron.jpg|thumb]]
*'''Megatron''' (Legends, 2019)
**''ID number:'' '''MEM054'''
:''Metal Earth Legends'' Megatron is a DIY 3D steel model kit in the shape of a super deformed version of the [[evergreen]] Megatron design. The kit's difficulty rating is given as "moderate".
{{-}}

==Hallmark Keepsake Ornaments==
[[File:Hasbro-transformers-megatron-ornament.jpg|thumb|upright=1.66|It's toy accurate.]]
*'''Megatron''' (July 11, 2015)
:Produced by Hallmark for the 2015 Christmas season, this ornament is sculpted based on the original Megatron toy in robot mode.

{{-}}

==Block Wars==
*'''Megatron''' (2016)
**''Number:'' '''3'''

:Part of [[Kabaya]]'s ''[[Transformers Block Wars]]'' candy toy line, this Megatron kit is based on his [[Megatron (G1)/toys#Cyber Series|Cyber Series Battalion toy]]. Molded in blue and grey plastic with detailing from stickers, he transforms into a tank when finished. He can also be taken apart and combined with ''Block Wars'' [[Optimus Prime (G1)/merchandise#Block Wars|Optimus Prime]], [[Bumblebee (G1)/toys#Block Wars|Bumblebee]] and [[Starscream (G1)/toys#Block Wars|Starscream]] in various configurations, the ones involving Megatron shown on the packaging being:

:*Giving Megatron's cannon and Starscream's wings to Optimus Prime.
:*Placing Megatron's turret on Prime's truck mode.
:*Giving Bumblebee Megatron's arms and Starscream's wings and arming him with Optimus Prime's spear.
:*Attaching Megatron's cannon and Starscream's wings to Bumblebee's vehicle mode, making him a flying death car.
:*Arming Megatron with Starscream's weapons and transforming him into a base/turret mode.
:*Attaching Prime and Starscream's legs to Megatron's vehicle mode to create a walking tank.
:*Combining Megatron and Starscream's vehicle modes into a jet-tank.
:*Combining all four into an unnamed combiner, with Megatron forming the right leg and providing his cannon as a handgun.

==Bitfig==
[[File:Bitfig-Part-1.jpg|thumb|]]
*'''Megatron''' (12–2016)
:Part of the first wave of Transformers Bitfig capsule toys by [[TakaraTomy A.R.T.S.]], Megatron's design is inspired by his appearance in the G1 cartoon, and is articulated at the neck and shoulders. Bitfig toys were packaged in capsules color coded to the toy they contained.
{{-}}

==Prime 1 Studio==
===''Premium Masterline''===
[[File:TF-Premium-Masterline-PMTF-02-Megatron.jpg|upright=1.55|thumb|"As Prime said, this design would've shut [[GEEWUN|you]] [[True fan|people]] up if [[Paramount Pictures|th]][[Michael Bay|ey]] decided to use this design."]]
*'''Megatron''' (2017)
**''ID Number'': '''PMTF-02''' / '''02EX''' (exclusive)
**''Accessories'': Base, Energon sword (exclusive), Energon mace (exclusive)

:[[Prime 1 Studio]] ''Premium Masterline'' Megatron is a ''massive'' non-transforming statue based on his Generation 1 appearance with a blend of live-action film aesthetic, with LED light on his eyes and fusion cannon. The statue was also designed by [[Josh Nizzi]] himself. If customers had purchased the statue at [https://www.sideshowtoy.com/collectibles/transformers-megatron-transformers-generation-1-prime-1-studio-9028261/ Sideshow's website], they would receive exclusive sword and mace accessories, which can be attached to Megatron's left hand.

:The standard version was limited to 1000 pieces, while the exclusive version was limited to 500 pieces.

{{-}}{{anchor|P1SGold}}
[[File:TF-Premium-Masterline-PMTF-02GL-Megatron-Gold-Edition.jpg||upright=1.55|thumb]]
*'''Megatron Gold Version''' (2018)
**''ID Number'': '''PMTF-02GL'''
**''Accessories'': Base, sword

:Limited to 350 pieces, Megatron Gold Version is a redeco of the statue above, evoking his Electrum-coated appearance in the Generation 1 episode "[[The Golden Lagoon (episode)|The Golden Lagoon]]". He also comes with a sword accessory.
{{-}}

===''Age of Time''===
[[File:Prime1StudioSuperiorMegatron.jpg|upright=1.55|thumb]]
*'''Superior Megatron''' (<s>201?</s>)

:''Age of Time'' Superior Megatron was designed to be the "ultimate amalgamation" between G1 and movie [[Megatron (Movie)|Megatrons]], specifically taking cues from Megatron's appearance in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]''.

:For reasons unknown, this figure was silently canceled.
{{canceledtoy}}

{{-}}
===''Cutie1''===
[[File:Cutie1 Megatron Figure.jpg|upright=1.11|thumb]]
*'''Megatron''' (2022)
**''ID Number'': '''No:056'''
**''Accessories'': Stand

:A striking departure from previous Prime 1 Studio offerings, ''Cutie1'' Megatron is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

{{anchor|Cutie1keychain}}
*'''Megatron''' (Keychain, 2021)
**''Accessories'': Stand, chain

:Part of a marketing push following the announcement of the figure above, an acrylic keychain of ''Cutie1'' Megatron was released, along with other products such as stickers, T-shirts, hand towels and totebags using the design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.

{{anchor|Cutie1Set}}
*'''Nemesis Prime & TR Silver Megatron Set''' (2-pack, 2023)
**''Accessories'': Stand

:''Cutie1'' "TR Silver Megatron" is a metallic silver redeco of the regular figure with yellow eyes instead of red. He comes in a set with [[Nemesis Prime (G1)#Cutie1|Nemesis Prime]].

{{-}}{{anchor|P1SWFC}}

===''War for Cybertron Trilogy''===
[[File:Prime-1-Studio-WFC-Megatron.jpg|upright=1.66|thumb]]
*'''Megatron''' (<s>2022</s>)
**''ID Number'': '''PMTF-06''' / '''06UT''' (Ultimate Version)
**''Accessories'': Base (standard), base with Omega Supreme (Utimate Version)

:A statue based on Megatron's appearance in the ''[[Transformers: War for Cybertron Trilogy (cartoon)|War for Cybertron Trilogy]]'' cartoon. The exclusive version includes a defeated [[Omega Supreme (G1)#Prime 1 Studio|Omega Supreme]] as part of the statue's base.

:This item was canceled due to the combination of rising production costs and insufficient preorders.
{{canceledtoy}}
{{-}}

==My Busy Books==
[[File:TF-My-Busy-Books-Transformers-Megatron-figurine.jpg|upright=1.66|thumb|At least one of your nerd parents would complain that I'm not a <s>gun</s> upside down Submarine on this one.]]
*'''Transformers: My Busy Book''' (2017)
:Available with the [[Transformers: My Busy Book|10-page board book]] and a box filled with 12 figurines & a playmat depicting a destructed city & Cybertron, this Megatron is a pair of small, PVC non-transforming figurines consists of his robot and his tank alternate mode, which was based on his [[evergreen]] design. Like most of the land-based vehicle figurines, his treads do not roll.

:Since his tank turret is made out of softer plastic, it tends to droop down occasionally.
{{--}}

==Kidrobot==
[[File:Kidrobot GIJoe Enamel Pin Series.jpg|thumb|250px]]
===Enamel Pin Series===
*'''Megatron''' ([[November 3]], [[2017]])
:*''Rarity:'' 1 in 20
:Released by [[Kidrobot]] in their Enamel Pin Series, this is a flat, enamel pin badge of Megatron inspired by the art of [[Tom Scioli]]'s ''[[Transformers vs. G.I. Joe]]'', albeit with [[Super deformed|cutesy proportions]]. Megatron's design throughout Kidrobot's merchandise features his [[Energon mace]] coming out of the end of his [[fusion cannon]]. The pin series was [[Blindpacking|blindboxed]], with some pins being rarer than others.
{{--}}

===Vinyl Mini Series===
[[File:Kidrobot GI Joe Megatron mini.jpg|thumb|upright=1]]
*'''Megatron''' ([[November 14]], [[2017]])
:*''Rarity:'' 2 in 24
:*''Accessories'': [[Grimlock (G1)|Grimlock]]'s head
:The same character design was reused for the Vinyl Mini Series, with Megatron receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. Megatron featured articulation in each shoulder, and even included the macabre accessory that is Grimlock's severed beast mode head, as claimed by Megatron in "[[Everybody Hates Metroplex]]".
{{--}}

===Medium Figure Series===
[[File:Kidrobot GI Joe Megatron medium.jpg|thumb|upright=1]]
*'''Megatron''' ([[November 14]], [[2017]])
:*''Accessories'': Grimlock's head
:This "art figure" of Megatron, released in the Medium Figure Series, followed the same design, now blown up to seven inches; some painted-on details of its smaller incarnation were now rendered as part of the sculpt. In addition to articulated shoulders, Megatron now also featured a turning head. Grimlock's severed head was also included as an accessory, and his Energon mace, previously molded in a static position, was now made with a linked chain.

:Unlike the rest of Kidrobot's ''Transformers vs. G.I. Joe'' line, the Medium Figure Series were sold in open-faced boxes.
{{-}}
{{anchor|kidrobotpurple}}
[[File:Kidrobot GI Joe Megatron medium exclusive.jpg|thumb|upright=1]]
*'''Megatron''' ([[November 14]], [[2017]])
:*''Accessories'': Grimlock's head
:Released at the same time as the standard version, this variant of Megatron was limited to 200 pieces and exclusive to the Kidrobot online store. Megatron is now decoed in a lighter grey, replacing most of his charcoal paint with purple. It's not a particularly comic accurate colour scheme—it could match the banquet scene in "[[Earth: R.I.P.]]" if you really squint—but then neither was [[Cobra Commander#kidrobotblack|Cobra Commander's exclusive variant]], so it's probably fine.
{{--}}

===Vinyl Keychain Series===
[[File:Kidrobot GI Joe Megatron keychain.jpg|thumb|upright=1]]
*'''Megatron''' ([[December 1]], [[2017]])
:*''Rarity:'' 3 in 24
:Megatron was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation. Like the enamel pin, there's no Grimlock head in sight.
{{-}}

==Threezero==
===Premium===
*'''Megatron - Classic Edition''' (<s>2017</s>)

:A Premium Scale Collectible Figure of Megatron was revealed by [[3A]] alongside their [[Optimus Prime (G1)/merchandise#Threezero|Optimus Prime]], but never saw release.
{{canceledtoy}}

{{anchor|ThreezeroWFC}}
===DLX===
====''War for Cybertron Trilogy''====
*'''Megatron''' (DLX Scale, 2021)
**''Accessories:'' TBA
{{charstubtoys}}
{{-}}

===MDLX===
[[File:Threezero-MDLX-Megatron.jpg|thumb|upright]]
*'''Megatron''' (2023)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one fusion cannon, one back-mounted cannon, three pairs of hands (closed, relaxed, pointing right & open left)
:[[Threezero]]'s third original MDLX figure, this version of Megatron is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Megatron is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and accessories, namely his fusion and back cannons. The three pairs of hands he comes with are closed fists, relaxed splayed-open hands, and a pointing right & open left hands. The fusion cannon barrel can either swap out for the back one or be combined together for maximum fusion.

::*''[https://www.threezerohk.com/product/mdlx-megatron/ More information on MDLX Megatron at Threezero]''
{{-}}
{{anchor|MDLXComic}}
[[File:MDLX-Megatron-Comic-Book-Edition-Proto.jpg|thumb|upright]]
*'''Megatron (Comic Book Edition)''' (2023)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one fusion cannon, one back-mounted cannon, three pairs of hands (closed, relaxed, pointing right & open left)
:A redeco of the above MDLX figure in a deco inspired by his [[Megatron (G1)/Marvel Comics continuity|appearance in the old Marvel comics]]. Accessories, functionality and the like are all otherwise identical. Furthering the homage, his package art is loosely based off of [[Power Play!|the cover for ''Power Play!'']].

::*''[https://www.threezerohk.com/product/mdlx-megatron-comic-book-edition/ More information on MDLX Megatron (Comic Book Edition) at Threezero]''
{{-}}

{{anchor|MDLXG2}}
[[File:Threezero-MDLX-Megatron-G2-promo.jpg|thumb|upright]]
*'''Megatron''' (2023)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one fusion cannon, one back-mounted cannon, three pairs of hands (closed, relaxed, pointing right & open left)

:Another redeco of Megatron in his [[Transformers: Generation 2 (toyline)|''Generation 2'']] [[Megatron (G1)/toys#Generation 2|attire]], neon camouflage and all. As such, all the aforementioned accessories and features carry over to this release.

:In a cute touch, his all of his product photos provided by Threezero are styled after the packaging of the G2 toyline.

::*''[https://www.threezerohk.com/product/mdlx-megatron-g2-universe/ More information on MDLX Megatron (G2 Universe) at Threezero]''
{{-}}

{{anchor|MDLXVintage}}
*'''Megatron''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one fusion cannon, one back-mounted cannon, three pairs of hands (closed, relaxed, pointing right & open left)

:Yet another redeco of Megatron, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

:Vintage Animation Edition Megatron, [[Bumblebee (G1)/merchandise#MDLXVintage|Bumblebee]] and [[Optimus Prime (G1)/merchandise#MDLXVintage|Optimus Prime]] were revealed in a [https://newsroom.hasbro.com/news-releases/news-release-details/40-years-one-legacy-hasbro-celebrates-transformers-40th press release] from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

::*''[https://www.threezerohk.com/product/mdlx-megatron-vintage-animation-edition/ More information on Megatron (Vintage Animation Edition) at Threezero]''
{{comingsoontoy}}
{{-}}

==Bouncing Ball Heads==
[[File:BouncingBallHead Megatron.jpg|upright=1.22|thumb]]
*'''Megatron''' (2017)
:"Bouncing Ball Head" Megatron is a small, super deformed figurine with a removable head that doubles as a bouncy ball. A Decepticon logo is tampographed on the back of his head and his name is written under his feet.

:He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique light gray color.

:Despite clearly representing Generation 1 characters, the collection is advertised as a 2015 ''[[Transformers: Robots in Disguise (2015 franchise)|Robots in Disguise]]'' product.
{{-}}
==Forever Clever==
{{anchor|jumbochalk}}
*'''4 Pack Jumbo Chalk Set''' (2018)
:Released by [[Forever Clever]], the 4 Pack Jumbo Chalk Set includes a chalk holder featuring Megatron. He's bundled with chalk holders of [[Optimus Prime (G1)/merchandise#Jumbochalk|Optimus Prime]], [[Bumblebee (G1)/merchandise#Jumbochalk|Bumblebee]] and [[Soundwave (G1)/merchandise#Jumbochalk|Soundwave]], and 4 pieces of appropriately colored chalk.
{{anchor|shapechalk}}
*'''5 Pack Shaped Chalk''' (2019)
:A piece of gray chalk formed into the shape of Megatron. Bundled with [[Optimus Prime (G1)/merchandise#shapechalk|Optimus Prime]], [[Bumblebee (G1)/merchandise#shapechalk|Bumblebee]], [[Starscream (G1)/merchandise#shapechalk|Starscream]] and [[Windblade (G1)#shapechalk|Windblade]].
{{anchor|WallWalker}}
*'''Wall Walkers Megatron''' (2018)
:Exclusively released in [[Blindpacking|blind bags]], ''Wall Walkers'' Megatron has suction cups on its hands and feet so it can stick to walls. All its details are printed on, and besides its colors and printing, it is identical to the other Wall Walkers toys.
{{anchor|MiniWalker}}
[[File:MysteryMiniWalkers.jpg|upright=1|thumb]]
*'''Mystery Mini Walkers Megatron''' (2021)
:Also a blind bag exclusive, ''Mystery Mini Walkers'' Megatron is an eraser-like figure with movable arms and legs and printed-on details.
{{-}}

{{anchor|ClipCharms}}
[[File:ForeverCleverClipCharms.jpg|upright=1|thumb]]
*'''Clip Charms Megatron''' (2024)
:Released in blind bags, ''Clip Charms'' features a keychain of Megatron's face, with his name above.
{{-}}
{{anchor|KeyBlasters}}
[[File:Keyblasters.jpg|upright=1|thumb]]
*'''Key Blasters''' (2024)
:A toy car released as part of the ''Key Blasters'' series features Megatron on its side and hood. A key is included. When it is inserted into the car, pushing the button on the key will propel the car forward. It was sold in a two-pack with a [[Grimlock (G1)/toys#KeyBlasters|Grimlock]] themed car.
{{-}}
===Squeezelings===
*'''Megatron''' (Series 1, 2022)
:''[[Squeezelings]]'' Megatron is a [[super deformed]], non-posable figure made of soft plastic, released by [[Forever Clever]]. He was released in [[blindpacking|blind bags]] and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

{{-}}{{anchor|SqueezelingsBlackout}}
*'''Blackout Color Mode Megatron''' (2022)
:A [[black redeco]] of the previous Megatron figure. It was exclusive to an 8-figure gift set, featuring [[Optimus Prime (G1)/merchandise#Squeezelings|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings|Bumblebee]], [[Starscream (G1)/merchandise#Squeezelings|Starscream]], [[Megatron (G1)/merchandise#Squeezelings|Megatron]], and Blackout Color Mode versions of the three other characters.

{{-}}{{anchor|Squeezelings2}}
*'''Megatron''' (Series 2, 2023)

:A figure of Megatron in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongside [[Optimus Prime (G1)/merchandise#Squeezelings2|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings2|Bumblebee]] and [[Optimus Primal (BW)/toys#Squeezelings|Optimus Primal]], in blind bags, or on blister card individually. He was later rereleased as a part of Squeezelings Sidekicks, with a pack-in comic.

==Imaginarium Art==
[[File:ImaginariumMegatron.jpg|upright=1.66|thumb|"When we slip this credit card charge for a $1300 statue into the Autobots' account, the Autobots will be overdrawn forever!" "NOOOOOOO--!"]]
*'''Megatron''' (2018)
**''Accessories'': Energy flail

:[[Imaginarium Art]]'s Megatron statue stands 25 inches tall atop a base of [[Ironhide (G1)|Ironhide]]'s dead body. The eyes and fusion cannon can light up. Only 500 were produced.
{{-}}

*'''Megatron''' (2019)

:"Legacy of Cybertron" Megatron stands a mere 20 inches tall and is posed holding an energon cube above his head. The base of the statue can combine with others in the LoC series to produce a larger battle scene. 500 were produced.

*'''Starscream''' (2022)

:This 29-inch-tall statue is a [[BigBadToyStore]] exclusive, and features Starscream (with light-up eyes) standing on Megatron's deactivated head. Only 130 were produced.
{{-}}

==McDonald's==
[[File:2018-McD-Authentics-Bumblebee-Megatron.jpg|upright=1.22|thumb]]
*'''Megatron''' (Happy Meal Toy, 2018)
:Released as part of the [[McDonald's]] June 2018 Happy Meal Toys along with [[My Little Pony]], this Megatron is a [[super deformed]] toy. He has a wind-up walking [[gimmick]].

:This toy was rereleased in the US as [[Megatron (Movie)/toys#McDonald's 2|Megatron]] for the ''[[Bumblebee (franchise)|Bumblebee]]'' promotion.
{{-}}

==''Keshi Surprise''==
*'''Decepticons''' (2018)

:The ''[[Keshi Surprise]]'' series by [[Super7]] consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980s [[Decoy]]s. These [[blind-packed]] figures were sold individually or in cases depicting only their faction. Megatron was available in red, orange, blue, and purple and included a foil trading sticker.
{{-}}

==Transformers Trading Card Game==
[[File:W1MegatronDL.jpg|thumb]]
*'''Megatron, Decepticon Leader''' (2018)
**'''Wave 1'''
**''Rarity: '''''CT'''
**''Card Number: '''''T26/T40'''
**''Stars: ''10
:Megatron, Decepticon Leader is one of forty double-sided character cards available in Wave 1 of the [[Transformers Trading Card Game]].

{{-}}
[[File:W1MegatronLW.jpg|thumb]]
*'''Megatron, Living Weapon''' (2018)
**'''Wave 1'''
**''Rarity: '''''RT'''
**''Card Number: '''''T27/T40'''
**''Stars: ''13
:Megatron, Living Weapon is one of forty double-sided character cards available in Wave 1 of the [[Transformers Trading Card Game]].

:The artwork for the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile game.
{{-}}
[[File:W2Megatron.jpg|thumb]]
*'''Megatron, Arrogant Ruler''' (2019)
**'''Wave 2: Rise of the Combiners'''
**''Rarity: '''''CT'''
**''Card Number: '''''T29/T46'''
**''Stars: ''10
:Megatron, Arrogant Ruler is one of forty-six character cards released in Wave 2 of the [[Transformers Trading Card Game]], Rise of the Combiners.

:Line-art for both Bot and Alt Mode was drawn by [[Dan Khanna]]. The Alt Mode artwork is based on the [[Combiner Wars (franchise)|Combiner Wars]] Leader Class Megatron toy.

{{-}}
[[File:W2SMegatronCT.jpg|thumb]]
*'''Megatron, Cybertronian Tyrant''' (2019)
**'''Wave 2S: Bumblebee vs. Megatron Starter Set'''
**''Rarity: '''''RT'''
**''Card Number: '''''T02/T04'''
**''Stars: ''7

:Megatron, Cybertronian Tyrant was released as part of the Transformers Trading Card Game's Bumblebee vs. Megatron Starter Set. The card was packaged alongside [[Bumblebee (G1)|Bumblebee]], Least Likely, Most Dangerous, [[Starscream (G1)|Starscream]], Decepticon Lieutenant, [[Windblade (G1)|Windblade]], Defender of Truth, and a 40 card ready-to-play deck of Battle Cards.

:The cards Alt Mode artwork is based on the [[Combiner Wars (franchise)|Combiner Wars]] Leader-Class Megatron toy. Line-art for both Alt and Bot Mode was drawn by [[Dan Khanna]].
{{-}}
[[File:W3GeneralMegatron.jpg|thumb]]
*'''General Megatron, Infantry-Leader''' (2019)
**'''Wave 3: War for Cybertron: Siege I'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T06/T48'''
**''Stars: ''13

:General Megatron, Infantry-Leader is one of forty-eight double-sided character cards available in Wave 3 of the [[Transformers Trading Card Game]], War for Cybertron: Siege I.

:The card's artwork is based on the ''[[War for Cybertron: Siege|Siege]]'' Voyager-class Megatron toy, with the Bot Mode artwork being reused from the toy's packaging art.
{{-}}
[[File:W4LordMegatron.jpg|thumb]]
*'''Lord Megatron, Conqueror of Cybertron''' (2019)
**'''Wave 4: War for Cybertron: Siege II'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T08/T52'''
**''Stars: ''12

:Lord Megatron, Conqueror of Cybertron is one of 52 character cards released in Wave 4 of the [[Transformers Trading Card Game]], War for Cybertron: Siege II.

:The card's artwork is based on the ''Siege'' Megatron toy. The Alt Mode artwork is was drawn by [[Marcelo Matere]] with colors by [[Volta]]
{{-}}
[[File:EEMegatron.jpg|thumb]]
*'''Megatron, Living Weapon''' (2019)
**'''Wave 1: Energon Edition'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T03/T06'''
**''Stars: ''13

:Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Megatron, Living Weapon. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art by [[Marcelo Matere]].
{{-}}
[[File:W5Megatron.jpg|thumb]]
*'''Megatron, Fallen Hero''' (2020)
**'''Wave 5: Titan Masters Attack'''
**''Rarity: '''''UT'''
**''Card Number: '''''T27/T46'''
**''Stars: ''11

:Megatron, Fallen Hero is one of forty-six double sided character cards released as part of Wave 5 of the [[Transformers Trading Card Game]], Titans Masters Attack. As a character with a body mode, Megatron begins the game with a Titan Master attached in head mode. Once Megatron is KO'd, said Titan Master is deployed.

:The card's artwork is based on the ''[[Titans Return (franchise)|Titans Return]]'' Megatron toy, with the body mode artwork being reused from the toy's packaging art and original alt mode artwork based on the toy's tank mode (line art by [[Ken Christiansen]]).

:This card's set was originally set for an April 2020 release, however due to the global COVID-19 pandemic the release was pushed back to May 29, 2020.

{{-}}

==''Super Cyborg''==
[[File:SuperCyborgMegatron.jpg|thumb|"Megatron has a clear chestplate? I, STARSCREAM, AM NOW THE LEADER!"]]
*'''Megatron''' (2019)
**''Accessories'': Torso plate

:Produced by [[Super7]], ''Super Cyborg'' Megatron is an 11-inch-tall non-transforming figure with 7 points of articulation. Its main distinguishing feature is that the entire front of the robot torso is removable, exposing sculpted mechanical details within his body.

*'''Megatron (clear)''' (2019)
**''Accessories'': Torso plate

:The transparent plastic version of this figure was exclusive to [[San Diego Comic-Con]] 2019.

*'''Megatron (Purple Grid)''' (2019)
**''Accessories'': Torso plate

:This [[New York Comic Con]] 2019 exclusive redeco features translucent purple to represent Megatron's reformatting in the animated movie.

*'''Good Bye Megatron''' (2023)
**''Accessories'': Torso plate

:This San Diego Comic-Con 2023 exclusive is a particularly deep cut, though a slightly misguided one. Meant to evoke the uncommon [[:File:G1toy gb megatron.jpg|"Good Bye" version of the original Megatron toy as released only in Japan]], it now features darker grey base plastic with new interior blue highlights. However, those blue highlights were ''not'' on the original "Good Bye Megatron" toy at all - they were only on its [[package art|box art]], which had been left over from the earlier standard release of the Japanese Megatron toy.

{{-}}

==ReAction==
*'''Megatron''' (2020, 2024)

: Released in the first wave of [[Super7]]'s line of multi-property 3.75-inch "retro" action figures, ''[[ReAction]]'' Megatron is a non-converting 3 3/4-inch action figure based on his appearance in the original cartoon, with 5 points of articulation (swivel neck, shoulders, hips) and holes in his feet for use with some variety of stand. Where most ''ReAction'' figures come with a separate accessory, Megatron's [[fusion cannon]] is permanently affixed to his right arm.

: As with all releases in the ''ReAction'' toyline, Megatron comes packaged on a small cardback that emulates the nostalgic packaging style of [[Kenner]]'s ''[[Star Wars (franchise)|Star Wars]]'' action figures from the late 1970s to early '80s.

: In late 2024, this figure was reissued with no obvious changes, now in a [[blindpacking|blindpacked]] box assortment (''see more on this below'').

{{-}}{{anchor|ReActionCyberchrome}}
*'''Cyberchrome Megatron''' (2020)

: This version of Megatron features a shiny metallic paint job. Whee.

: This figure was a [[Target]] exclusive in the US, released alongside the "[[Optimus Prime (G1)/merchandise#ReActionCyberchrome|Cyberchrome Optimus Prime]]" figure.

{{-}}{{anchor|ReActionMC12}}
*'''MC-12 GunRobo P-38''' (2020)

: As a special "[[Black Friday (event)|Black Friday]]" exclusive, ''ReAction'' Megatron got a [[black repaint]] meant to represent his [[Micro Change|pre-Transformer "GunRobo" body]]... albeit with a standard Decepticon symbol.

: This figure was only available through Super7's website.

{{-}}{{anchor|ReActionChromeCommander}}
*'''Chrome Commander Megatron''' (2021)

: The second Target-exclusive Megatron figure has a deco based on the [[Megatron (G1)/toys#The Transformers|original 1984 Megatron toy]], featuring shiny metallic paint on the "chrome" parts, red inner boots and the "swirly" chestplate markings.

: This figure was released alongside the first "[[Optimus Prime (G1)/merchandise#ReActionFallenTarget|Fallen Leader Optimus Prime]]" Target-exclusive figure. The gray one.

{{-}}{{anchor|ReActionGolden}}
*'''Megatron (Golden Lagoon)''' (2022)

: The third [[Target]]-exclusive Megatron figure, this one has a head-to-toe golden deco, depicting his appearance in "[[The Golden Lagoon (episode)|The Golden Lagoon]]".

: This figure was released alongside the similarly-decoed [[Optimus Prime (G1)/merchandise#ReActionGolden|"Golden Lagoon" Optimus Prime]] figure.

{{-}}{{anchor|ReActionFallenEvolution}}
*'''Fallen Evolution Megatron''' (2022)

: The ''fourth'' Target-exclusive version of Megatron, this version is done in translucent purple plastic to represent the beginning of his reformatting scan in the ''[[The Transformers: The Movie]]''.

: This figure was released alongside the thematically-similar full-color/open-chest [[Optimus Prime (G1)/merchandise#ReActionFallenTargetColor|"Fallen Leader" Optimus Prime]] figure.
{{-}}

*'''Transformers''' (2024)

: Several of the wave 1 ''ReAction'' figures were reissued in 2024 in [[blindpacking|blind box]] packaging. The only new figure in the assortment was a [[chase figure]] of Megatron now cast in translucent pink.

{{-}}

*'''Ark Base''' (Playset, 2024)

: The ''ReAction'' Ark Base playset included a Megatron figure seemingly identical to the very first release listed above.
{{-}}

==Flame Toys==
===Furai Model===
[[File:FlameToys-FuraiModel-06-MegatronIDW.jpg|upright=1.66|thumb]]
*'''Megatron (IDW Autobot ver.)''' (July [[2019]])
**''Number:'' '''06'''
** Accessories: 2 sets of alternative hands
:''Furai Model'' Megatron is a highly articulated snap-together model kit (no glue required!) by [[Flame Toys]], based on the [[:File:RageRage-Megatronappears.jpg|IDW Autobot design]] by Alex Milne, as seen in ''[[The Transformers: More than Meets the Eye|More than Meets the Eye]]''. Molded in PS and ABS plastic with polycaps for the joints, Megatron features a number of stickers for detailing but doesn't require much in the way of paint for a complete look, being molded in all the appropriate colors straight out of the box. The finished kit is Voyager-sized in height.

:If one chooses, the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers like ''Gundam Markers'' can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.
{{-}}

{{anchor|FuraiModelDecepticon}}
[[File:Furai-Model-Megatron-(IDW-2005-Decepticon-Ver).jpg|thumb|upright=1.66]]
*'''Megatron (IDW Decepticon ver.)''' (May [[2020]])
**''Number:'' '''14'''
** Accessories: 2 sets of alternative hands
:A redeco/retool of Megatron (IDW Autobot ver.). The key differences are a Decepticon insignia sticker and a slightly more dour face sculpt. Well, that's about it.
{{-}}

{{anchor|FuraiModelG1}}
[[File:FlameToys-FuraiModel-MegatronG1.jpg|upright=1.66|thumb]]
*'''Megatron (G1 ver.)''' (December [[2024]])
** Accessories: 2 additional pairs of alternative hands, 1 pair of forearm covers

:A third snap-together model kit by [[Flame Toys]] of Megatron, based on his appearance in the G1 cartoon. Aside from his hands, Megatron also comes with a pair of forearm cover panels that allow him to be displayed without the Fusion Cannon, or mount onto the left arm.

{{comingsoontoy}}
{{--}}

===Kuro Kara Kuri===
[[File:FlameToys-KuroKaraKuri-05-Megatron.jpg|upright=1.66|thumb]]
*'''Megatron''' (January, 2021)
**''Number:'' '''05'''
**''Accessories:'' 2 faces, 3 rifles, weapon case (exclusive), roaring face (exclusive)
**''Sculptor'': Yuki Onoda
**''Painting by'': Decomas Lab (Hiroyuki Hirose)

:Released by [[Flame Toys]] as part of their Kuro Kara Kuri line, A high-end non-transforming figure based on the [[:File:IDWongoing15 megatrons new body.jpg|IDW stealth bomber design]] by Don Figueroa featuring die-cast parts and 7 LEDs. He comes with two interchangeable faces and three different rifles which combine into one long rifle. If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a weapons case and additional roaring face.
{{-}}

==Daiki Kougyou==
[[File:Daiki-Kougyou-Megatron-Water-Gun.jpg|upright=1.66|thumb|Raining Pain.]]
*'''Megatron Water Gun''' (2021)
**''Accessories'': Silencer, stock, telescopic sight

:Manufactured by Daiki Kougyou, this Megatron water gun (yes, really) is based on his show-accurate pistol alt-mode, complete with silencer and stock. The prototype is sculpted by ''Model Works Grenade''. The gun's size is slightly larger than the original G1 toy. Unlike the said toy, the gun's muzzle must be removed first to attach the silencer.

:Megatron was available as a limited order item, where Japanese customers had until November 27, 2020 to reserve their copy. The item was shipped for buyers on February 2, 2021.

{{-}}

==''R.E.D. [Robot Enhanced Design]''==
[[File:TF-R.E.D.-Megatron.jpg|upright=1.66|thumb]]
*'''Megatron''' (2020)
**''Accessories'': Fusion Cannon, Energon Mace, 4 additional hands
{{toydesigner|[[Emiliano Santalucia]] (concept artist)}}

:Released as part of the first wave of the ''[[Transformers R.E.D.]]'' line, Megatron is a non-transforming 6-inch action figure akin to the ones from Hasbro's ''[[Marvel Comics|Marvel]] Legends'' and ''[[Star Wars (franchise)|Star Wars]] The Black Series'' lines. He features 23 points of articulation and extensive paint operations for [[show-accuracy]].

:Megatron comes with a whopping ''five'' interchangeable left hands: a closed fist, a hand to hold weapons or accessories (not included), a pointing hand, an open hand for gesturing, and a hand permanently molded to an [[Energon cube]]. His right fist is also removable; both wrists are compatible with his [[Energon mace]] accessory. His Fusion Cannon however cannot be removed from his right forearm.

:Unfortunately, Megatron's harder, unpaintable joints are prone to photodegradation.

:As with all ''R.E.D.'' toys, Megatron was a Walmart exclusive in Canada and the United States, and was later made available on [[Hasbro Pulse]] in limited quantities.

{{-}}
{{anchor|ReformattingMegatron}}
[[File:TF-R.E.D.-Reformatting-Megatron.jpg|upright=1.66|thumb|The perfect companion to your "[[Galvatron (G1)/toys#War for Cybertron Trilogy|Behold, Galvatron!]]"]]
*'''Reformatting Megatron''' (2021)
**''Accessories'': Fusion Cannon, Energon Mace, 4 additional hands

:The fourth wave of ''R.E.D.'' saw a redeco of Megatron, now cast mostly in translucent purple plastics and with a gridline deco to represent his [[reformatting]] into [[Galvatron (G1)/Generation 1 cartoon continuity|Galvatron]] by [[Unicron/Generation 1|Unicron]] in ''[[The Transformers: The Movie]]''. He retains all of his previous points of articulation and accessories.

:Like his previous ''R.E.D.'' toy, Megatron was a Walmart exclusive, with limited quantities available on Hasbro Pulse.

{{-}}
{{anchor|REDshockwave}}
[[File:RED-Shockwave.jpg|upright=1.66|thumb]]
*'''Shockwave''' (2022)

:The [[Shockwave (G1)/toys#R.E.D. .5BRobot Enhanced Design.5D|Shockwave]] figure included in the sixth wave of ''R.E.D.'' includes a handheld accessory of Megatron in pistol mode, complete with scope, silencer, and stock. Shockwave also comes with a pair of [[Fire Blast effect]]s that are compatible with this Megatron.
{{-}}

==Jada Toys==
===''Metalfigs''===
[[File:JadaMetalfigsG1DioramaScene.jpg|upright=1.44|thumb]]
*'''Diorama Scene''' (2 3/4" Die Cast Figure 4-pack, 2020)
**''Accessories'': Display backdrop
:Released by [[Jada Toys]], a static die-cast figurine of Megatron measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongside [[Optimus Prime (G1)/merchandise#DioramaScene|Optimus Prime]], [[Bumblebee (G1)/merchandise#DioramaScene|Bumblebee]] and [[Starscream (G1)/merchandise#Jada Toys|Starscream]].

:The packaging backdrop can be used as an additional display piece for the set.

{{-}}{{anchor|4inMetalfigs}}
[[File:JadaMetalfigsG1Megatron.jpg|upright=1.44|thumb]]
*'''Megatron''' (4" Die Cast Figure, <s>2021</s>)
**''Accessories'': Fusion cannon, Energon mace
:''Metalfigs'' Megatron is a 4 inches tall non-transforming super deformed die-cast figure with three points of articulation and light-up eyes. He comes with his signature fusion cannon and Energon mace weapons as accessories.

:Originally scheduled for a July 2021 release, it ended up being silently canceled.
{{canceledtoy}}

{{-}}{{anchor|Metalfigs4pack}}
*'''Optimus Prime / Bumblebee / Optimus Primal / Megatron''' (2 3/4" Die Cast Figure 4-pack, 2022)
:This static Megatron figurine is directly designed after the unreleased 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongside [[Optimus Prime (G1)/merchandise#Metalfigs4pack|Optimus Prime]], [[Bumblebee (G1)/merchandise#Metalfigs4pack|Bumblebee]] and [[Optimus Primal (BW)/toys#Metalfigs|Optimus Primal]].

{{-}}{{anchor|Metalfigssingle}}
*'''Megatron''' (2 3/4" Die Cast Figure, 2023)
:The same super deformed Megatron from the 4-pack above is also available in individual packaging.

{{-}}

===''Nano Metalfigs''===
[[File:JadaNanoMetalfigsG1-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 1 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:''Nano Metalfigs'' Series 1 Megatron is an incredibly small die-cast figurine molded doing an action pose. He has a little base attached to his feet for balancing reasons.

:He comes in an impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{anchor|NanoMetalfigs2}}
*'''Transformers Series 3 18-pack''' (4 cm Die Cast Figure Multipack, 2023)
:''Nano Metalfigs'' Megatron was re-released with no noticeable changes in ''another'' impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{--}}

==Figural Bag Clip==
[[File:FiguralBagClip Megatron.jpg|upright=1.22|thumb]]
*'''Megatron''' (2020)
:Released by [[Monogram]], this 2.5" 3D foam bag clip takes the form of a chibi evergreen Megatron.

:It was available only as part of a [[Blindpacking|mystery blind bag]] collection.
{{-}}
[[File:FiguralBagClip 2021 Megatron.JPG|thumb]]
*'''Megatron''' (2021)
:A non-articulated, non-transforming 3" figure of Megatron with an attached clip, also released by Monogram.

:Unlike the previous year's release it was sold on a standard cardback.

{{-}}

==''Pop!''==
[[File:Funko Pop Megatron G1.jpg|thumb|upright=1.44]]
*'''Megatron''' (2021)
**''ID number:'' '''24'''

:Released as part of the ''Pop! Retro Toys'' segment, [[Funko Pop!|Funko]]'s ''Pop!'' Megatron is a super deformed vinyl figure based on his original Generation 1 toy, though the head is much more cartoon-accurate.

{{-}}{{anchor|PopGIJoe}}
[[File:Funko Pop Mystery Box Megatron Duke GI Joe.jpg|thumb|upright=1.44]]
*'''Funko Mystery Box: Transformers vs. G.I. Joe''' (Giftset, 2021)
**''ID number:'' '''45'''

:Available only as part of a GameStop exclusive giftset, this retooled Megatron comes with his Energon mace attached to his right arm instead of his fusion cannon and comes [[Blindpacking|blindpacked]] inside a ''Transformers vs. [[G.I. Joe (franchise)|G.I. Joe]]''-themed lunch box alongside a ''Pop!'' [[Duke (G.I. Joe)#Pop!|Duke]] figure, a ''G.I. Joe'' logo decal, an Autobot logo keychain, and a set of four pins of Megatron, Duke, [[Optimus Prime (G1)/merchandise#Pop!|Optimus Prime]] and [[Cobra Commander#Pop!|Cobra Commander]].

{{-}}{{anchor|PopKeychain}}
[[File:Funko Pocket Pop Keychain Megatron.jpg|thumb|upright=1.11]]
*'''Megatron''' (Pocket ''Pop!'' Keychain, 2021)

:A smaller version of the regular ''Pop!'' Megatron with a keychain attached to his head.

{{-}}{{anchor|Digital Pop!}}
*'''Megatron''' ([[Funko Pop!#Digital Pop! NFTs|Digital ''Pop!'']], 2022)
**''Rarity:''
***''Monochrome:'' '''Common'''
***''Static:'' '''Common'''
***''Glowing:'' '''Uncommon'''
***''Chrome:'' '''Rare'''
***''Original:'' '''Epic'''
:{{W|Non-fungible token|NFT}}s depicting Megatron in the Funko style. Megatron also appears in gun mode in all of [[Starscream (G1)/merchandise#Digital Pop!|Starscream's NFTs]].
<center><gallery heights=200>
File:TRANSFORMERS_COMMON_MEGATRON_MONOCHROME.gif
File:TRANSFORMERS_COMMON_MEGATRON_STATIC.gif
File:TRANSFORMERS_UNCOMMON_MEGATRON_GLOW.gif
File:TRANSFORMERS_RARE_MEGATRON_PURPLECHROME.gif
File:TRANSFORMERS_EPIC_MEGATRON_ORIGINAL.gif|Peace Through Right-clicking!
</gallery></center>

{{-}}{{anchor|Pop! Pin}}
[[File:Funko-Pop-Pin-Megatron.jpg|thumb|upright=1.44]]
*'''Megatron''' (''Pop!'' Pin, 2022)
**''ID number:'' '''15'''
**''Accessories:'' Display stand
:A metallic enamel pin based on Megatron's vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

{{-}}{{anchor|Fundays}}
*'''Freddy Funko as Megatron''' (2023)
**''ID number:'' '''SE'''

:Exclusive to a Funko-oriented event called Fundays 2023, this regular-sized vinyl figure portrays [[Freddy Funko]] cosplaying as Megatron. The body of this figure is the same as the regular Megatron, while the head has been modified to incorporate Freddy's face. This figure features a metallic finish and was limited to 500 pieces.

{{-}}{{anchor|Pop40Years}}
*'''Megatron''' (2024)
**''ID number:'' '''132'''

:Released in celebration of the 40 years of the franchise, this regular sized ''Pop! Retro Toys'' Megatron is a similar mold to the original release, but is doing a different pose.

{{-}}{{anchor|Pop40Years2Pack}}
*'''Optimus Prime & Megatron''' (2-pack, 2024)

:A Hot Topic exclusive release of the 40th anniversary [[Optimus Prime (G1)/merchandise#Pop40Years2Pack|Optimus Prime]] and Megatron vinyls with a metallic finish to their paintings.
{{--}}

==Modern Icons==
[[File:Modern_Icons_Megatron_helmet.jpg|thumb|upright=1.66|We'll let this image speak for itself.]]
*'''Megatron Modern Icons Replica Helmet''' (December 27, 2021)
:A collaboration between Hasbro and statue and replica brand Modern Icons, this is a wearable helmet for adult collectors, based on Megatron's head. It features light-up eyes and authentic sounds and phrases.

:Originally due for release on August 13, 2021, the Megatron helmet was delayed until December 27 (as was [[Optimus Prime (G1)/merchandise#Modern Icons|its Optimus Prime counterpart]]). The helmet is a GameStop exclusive in the United States.
{{--}}

==''Zōteki''==
[[File:ZOTEKI-025-Megatron.jpg|thumb|upright=1.66]]
*'''Megatron''' ([[2021]])
**''ID number'': '''025'''

:A collaboration between [[Hasbro]] and statue/replica brand [[Jazware]], ''[[The Transformers (franchise)|The Transformers]]'' was added as a part of the ''[[Zōteki]]'' line alongside other iconic brands such as [[Marvel Comics|Marvel]], to recreate some of the main "Generation 1" characters. The 25th figure of the ''Zōteki'' line; Megatron wields his iconic [[Fusion cannon]].

:Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
{{--}}

==Eaglemoss==
[[File:EaglemossChess Megatron.jpg|upright=1.11|thumb]]
* '''Transformers Gen-1 Chess Set''' (<s>2021</s>)
:In the planned [[Chess#Eaglemoss|Transformers Chess Set]] by [[Eaglemoss]], a relatively large and very well detailed statue of Megatron was slated to be the standard King piece on the Decepticon side.

:A Kickstarter campaign to raise the necessary funds for this project was launched, but failed to meet its goal by September 24, 2021 and the whole thing was canceled.
{{canceledtoy}}
{{-}}

==e-HOBBY==

===''Transformers Character Card''===
{{anchor|TCC G1}}
[[File:Transformers Character Card G1 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Convoy & Megatron Set''' ([[January 25]], [[2022]])
**''ID number:'' '''01 & 02'''
{{toydesigner|[[Shin Sasaki]] (illustration)}}

:Released as part of the first wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Optimus Prime (G1)|Optimus Prime]] (with [[Roller (G1)|Roller]]) and Megatron (with [[Starscream (G1)|Starscream]], [[Thundercracker (G1)|Thundercracker]] and [[Skywarp (G1)|Skywarp]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#02|Translation of G1 Megatron's Transformers Character Card]]''
{{-}}

{{anchor|TCC G2}}
[[File:Transformers Character Card G2 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Battle Convoy & Megatron Set''' ([[March 14]], 2022)
**''ID number:'' '''11 & 12'''

:Released as part of the second wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime and Megatron in their ''[[Transformers: Generation 2 (franchise)|Generation 2]]'' bodies along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Megatron is specifically depicted as the [[Megatron (G1)/toys#Hero|Hero Megatron]] toy.
::*''[[Source:Transformers Character Card#12|Translation of G2 Megatron's Transformers Character Card]]''
{{-}}

{{anchor|TCC Black}}
[[File:Transformers Character Card Megatron Black and Convoy Black.jpg|upright=1|thumb]]
*'''Transformers Card Binder (includes 2 special cards)''' ([[November 1]], 2022)
**''ID number:'' '''EX'''

:Released in its fifth wave as something of a "season one finale" to the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this 40-slot binder intended to contain the entire ''Character Card'' series thus far is packed with a pair of holographic trading cards depicting super-deformed art of Optimus Prime and Megatron in the forms of their first e-HOBBY exclusive toys along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Megatron is specifically depicted as ''the'' first e-HOBBY exclusive toy, ''[[The Transformers: Collector's Edition|Collector's Edition]]'' "[[Megatron (G1)/toys#Collector's Edition|Megatron Black Version]]."
::*''[[Source:Transformers Character Card#EXM|Translation of Megatron Black Version's Transformers Character Card]]''
{{-}}

{{anchor|TCC Action}}
[[File:Transformers Character Card Action Master Megatron and OP.jpg|upright=1|thumb]]
*'''Convoy (Action Master) & Megatron (Action Master) Set''' ([[December 28]], [[2024]])
**''ID number:'' '''93 & 94'''

:Released as part of the thirteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Armored Convoy]]) and Megatron (with [[Neutro-Fusion Tank]]) in their [[Action Master]] forms along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#94|Translation of Action Master Megatron's Transformers Character Card]]''

{{-}}

{{anchor|TCC Decepticon}}
[[File:Transformers Character Card Unicron and Decepticons.jpg|upright=1|thumb]]
*'''Destron Army and Unicron Set''' (December 28, 2024)
**''ID number:'' '''99 & 100'''

:Released as part of the thirteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of the Generation 1 [[Decepticon]]s (as represented by Megatron, [[Soundwave (G1)|Soundwave]], [[Laserbeak (G1)|Laserbeak]], [[Starscream (G1)|Starscream]], [[Shockwave (G1)|Shockwave]], [[Stranglehold]], and [[Banzai-Tron (G1)|Banzai-Tron]]) and [[Unicron]] along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#99|Translation of the Decepticons' Transformers Character Card]]''

{{--}}

===Acrylic keychain series===
[[File:E-Hobby Megatron and Starscream keychains.jpg|upright=1|thumb]]
*'''Megatron & Starscream''' ([[October]], [[2022]])

:Released as part of the first wave of an [[e-HOBBY]] exclusive series, this pair of keychains depicts character art and assets re-used from Megatron and [[Starscream (G1)|Starscream's]] [[The Transformers: Masterpiece|''Masterpiece'']] releases, namely [[Megatron (G1)/toys#MP36|MP-36 Megatron]] and [[Starscream (G1)/toys#MP52|MP-52 Starscream Ver. 2.0]] respectively.

{{--}}

==ULTIMATES!==
*'''Megatron''' (2023)
**''Accessories'': Regular head, control helmet head, Energon-drinking head, antimatter chest, laser sword, blaster, Kremzeek, 6 hands, hand with Energon cube, chemical flask, [[Pearl of Bahoudin]], 2 energy maces

: Part of the second wave of ''[[Transformers ULTIMATES!]]'' from [[Super7]], Megatron is an 8-inch-tall non-transforming figure. Despite his retro look, he has ''way'' more articulation than the original, including multi-directional joints at the neck, shoulders, wrists, hips, and ankles; plus swivel biceps, elbows, knees, and a bit of ab crunch. He even has an opening chest with pictures of antimatter cubes behind it, as seen in the end of the [[The Transformers (cartoon)|original cartoon]] episode "[[Roll for It]]". His hands pop out at the wrists so they can be replaced with his additional spare hands or other accessories.

: Among said accessories are some that have by now been included frequently with Megatron figures, such as his energy mace (here provided with both straight and curved chain versions), the blaster and laser sword from ''[[The Transformers: The Movie]]'', as well as [[Kremzeek]]. More innovative accessories include an alternate head with the control helmet from "[[Prime Target (episode)|Prime Target]]", a half-empty energon cube and drunkenly-grinning alternate head meant to represent the drinking scene in "[[Microbots]]", the Pearl of Bahoudin from "[[Trans-Europe Express]]", and the chemical flask that Megatron is shown throwing at [[Gregory Swofford]] in "[[The Return of Optimus Prime, Part 1]]" (deep cut!).

: Preorders for Megatron (and the rest of Wave 2) opened on [[July 29]] 2021, and closed on [[August 27]], with the toys slated for shipping in summer 2022... a vague date Super7 missed by a full year.

{{-}}{{anchor|UltimatesG2}}
[[File:Ultimates_G2_Megatron.jpg|upright=1.66|thumb|Voice of Doom and [[Galvatron (BW)|Galvatron]] Action Figure not included.]]
*'''Megatron''' (2023)
**''Accessories'': Sword, fusion cannon (toy), fusion cannon (comic), gun (toy), 2 guns (comic), alternate head (toy), alternate head (comic), alternate head (G1 design), 2 fists, 2 sword-holding hands, 2 gun-holding hands, 2 trigger hands, bullet bandolier

: The second ULTIMATES! Megatron figure, released in the line's third wave, depicts him in his ''[[Transformers: Generation 2 (franchise)|Generation 2]]'' tank body. Aside from the toy-accurate tank-cannon and handgun and standard suite of alternate hands, he comes with a number of accessories and alternate parts based on his appearances in the [[Transformers: Generation 2 (Marvel)|''Generation 2'' comic]]: a "G1"-styled alternate head and purple "G1" fusion cannon (as he was almost invariably drawn with those rather than a toy-accurate head and cannon), a screaming blue-faced version of the "G1" head to replicate [[:File:Final_Transformations_Megatron_kills_Override.jpg|the panel]] where he kills [[Override (G1)|Override]] from [[Final Transformations|''G.I. Joe'' #142]], the massive gun he holds on the cover of [[All or Nothing!|issue #2]], his sword from the cover of [[Escalation!|issue #8]], the pistol he used in the "Because I'm an '''idiot''', that's why!" panel from [[Total War!|issue #10]], and a bullet bandolier because why not.

: Preorders for G2 Megatron (and the rest of Wave 3) opened on [[December 1]], 2021, with the toys projected to ship in fall 2022... and ''actually'' shipping in November 202''3''.

{{-}}{{anchor|UltimatesStarscream}}
*'''Starscream''' (2023)
**''Accessories'': 2 arm cannons, 2 alternate heads, 2 fists, 2 gripping hands, open palm right hand, grasping left hand, claw, energon cube, Megatron gun, blaster rifle

: The wave-4 non-ghost ''ULTIMATES!'' [[Starscream (G1)/merchandise#ULTIMATES!|Starscream]] includes multiple accessories, among them a Megatron in classic gun mode.

: Preorders opened on [[June 8]] 2022, with toys purportedly shipping the following May.

{{-}}{{anchor|UltimatesReformatting}}
*'''Reformatting Megatron (2023)
**''Accessories'': Normal reformatting head, damaged reformatting head, 2 fists, 2 open hands, 2 trigger hands, 2 expressive hands

: This version of ''ULTIMATES!'' Megatron depicts him during his reformatting scan in [[The Transformers: The Movie|the animated movie]], now in purple plastic with extensive wireframe deco. He has an alternate head depicting its battle-damaged appearance while still being in purple "scan" mode - an appearance Megatron never actually had in the film.

: He comes with a ''lot'' fewer accessories than most other figures in the line. Granted, the sequence in question was not exactly one where he really had any, but still.

:Preorders were open until [[January 13]], 2023, with the toys purportedly shipping the following Fall, which turned out to mean March 2024.
{{-}}

<ul class="iconlist">{{Bp-d1|'''Megatron''' (2024)}}</ul>
:*''Accessories'': Fusion cannon

: The original ''ULTIMATES!'' Megatron was repackaged as a "Transformers Deluxe" figure, physically identical to the first release but now lacking all accessories except the fusion cannon. Its new packaging resembles a VHS clamshell box; specifically, the colors and trade dress strongly resemble the [[Video Gems]] tapes, while the character artwork and subtitle are taken directly from the [[The Original Transformers|Kid Rhino]] tapes.
{{-}}

==Nendoroid==
[[File:Nendoroid G1 Megatron.jpg|upright=1.66|thumb|Gokuuuu!]]
*'''Megatron''' ([[2022]])
**''Nendoroid ID Number'': '''1793'''
**''Accessories'': Angry face plate

:The second ''G1''-styled [[Nendoroid]] release after his arch-nemesis Optimus, Megatron is a [[super deformed]] fusion of cute and evil. Mostly the latter.

:Megatron comes with an optional "angry face" accessory to replace his regular facial expression, can interchange body parts with compatible figures, and is well-articulated despite his small size.

:Unusually for a Nendoroid figure, this sculpt is produced by Toyhouse with Nendoron's supervision.

{{-}}

==''Minimates''==
*'''Megatron''' (Series 2, 2022)
**''Accessories'': Fusion cannon, energy mace, stand

:Part of the second wave of Transformers [[Minimates]] from [[Diamond Select Toys|Diamond Select]], this Megatron is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. Due to their small size, all 4 figures in each series are sold in the same blister card.

*'''VHS Minimates Box Set''' (2022)

:''Minimates'' Megatron was rereleased as part of a [[San Diego Comic-Con]] 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles a [[Family Home Entertainment]] VHS tape. Only 2500 of this set were produced.
{{-}}

==Icon Heroes==
*'''Megatron X Soundwave Retro Pin Set''' (2022)
: A hard enamel pin based on Megatron's original G1 package art made by Icon Heroes. It comes carded with a [[Soundwave (G1)/merchandise#Icon Heroes|Soundwave]] pin.
{{comingsoontoy}}
{{-}}

==''Ultimetal''==
[[File:UltimetalMegatron.jpg|upright=1.66|thumb|Four million years later, it finally came out.]]
*'''Megatron''' (2022)
**''ID number:'' '''UM-03'''
**''Accessories:''

: ''Ultimetal'' Megatron is a large non-transforming figure produced by [[Art Storm]], standing at an impressive 17" and made from extensive [[die-cast]] metal. The figure is highly articulated and features [[LED]]s on the eyes and fusion cannon. Its most conspicuous features are the numerous magnetically attached armor panels that, when removed, reveal Megatron's internal anatomy, including functional pistons. It is also the first Transformers-related item ever released to include voice clips from [[Frank Welker]].

: This piece was first solicited in 2014 but suffered multiple delays, only at last being released in June 2022.
{{-}}

==Kotobukiya Bishoujo Series==
[[File:Bishoujo-Series-Megatron.jpg|thumb|Applications to join the Decepticons have since ''skyrocketed''.]]
*'''Bishoujo Series Transformers Megatron''' (February 2023)
**''Known designers:'' [[Shunya Yamashita]] (artist)
:''[[Kotobukiya]] [[Bishoujo Series]]'' Megatron is a 1/7 scale PVC figure that reimagines the Decepticon leader as a cute anime girl (formally termed as a ''{{w|Bishōjo}}''). This version of the character translates various elements of the robot design into fashion and style choices, such as her haircut being roughly shaped like Megatron's helmet, as well as converting the fusion cannon into an ''enormous'' handheld weapon. The figure is attached to a purple display base designed after the Decepticon insignia.

:A Deluxe Edition release also included a B5 sized acrylic board for display, featuring Yamashita's original artwork of the character.
{{-}}

==Transformers: Kindergarten Series==
[[File:Kindergarten-MegatronG1.jpg|thumb|300px|He can't transform until he turns 18.]]
*'''Megatron''' (2023)
:A childlike nontransformable figurine of Megatron was available as part of ''[[Transformers: Kindergarten Series]]'', a crowdfunded [[Blindpacking|blindpackaged]] toyline available exclusively in China. Megatron's figure was one of the commonly-occurring characters, and depicted him cradling a [[Kremzeek]] and holding an [[Energon]] drink. The figurine included a translucent plastic stand and a small character card.

{{-}}

==Super Shogun==
*'''Megatron''' (2023)
**''Accessories'':

:Produced by [[Super7]], this giant-sized representation of Megatron is supposed to harken back to the 1970s ''{{w|Shogun Warriors}}'' franchise. Megatron stands 24" tall and is made of hollow vinyl, with 3 points of articulation and wheels on his feet.
{{-}}

==''Magic: The Gathering''==
[[File:MTG-Megatron.jpg|thumb|upright=1.66]]
*'''Megatron, Tyrant / Megatron, Destructive Force''' (2022)
**''ID number:'' '''012/015'''
**''Set code:'' '''BOT'''
**''Color identity:'' '''Red/White/Black'''
**''Casting cost:'' '''{3}{R}{W}{B}''' (front), '''{1}{R}{W}{B}''' (back)

:"Megatron, Tyrant" is part of the 2022 ''[[Magic: The Gathering]]'' ''[[mtg:Universes Beyond|Universes Beyond]]'' ''[[mtg:Transformers|Transformers]]'' card set, found in Set Booster and Collector Booster packs of ''Magic''<nowiki>'s</nowiki> ''[[mtg:The Brothers' War|The Brothers' War]]'' set. It can be reversed to become "Megatron, Destructive Force", representing Megatron in vehicle mode.
:A variant of this card was available solely in Collector Booster packs, depicting [[Megatron (SG)#Magic: The Gathering|''Shattered Glass'' Megatron]].
{{anchor|MTGSLD}}
[[File:MTG-SLD-Megatron.jpg|thumb|upright=1.66|''But O, Phyrexia With your blood still warm on the ground'']]
*'''Megatron''' ''(Blightsteel Colossus)'' (2022)
**''ID number:'' '''1079'''
**''Set code:'' '''SLD'''
**''Color identity:'' '''Colorless'''
**''Casting cost:'' '''{12}'''

:"Megatron" is part of the ''[[Magic: The Gathering]]'' card pack ''Transformers: Optimus Prime vs. Megatron'', part of the ''[[mtg:Secret Lair|Secret Lair Drop Series]]'' ''[[mtg:Secret Lair Drop Series: December Superdrop 2022|December Superdrop 2022]]'' set. It was available exclusively from [https://secretlair.wizards.com secretlair.wizards.com] from [[December 5]], [[2022]] through [[January 6]], [[2023]].
:Megatron is a [[mtg:Skinned card|reskin]] of the existing ''Magic'' card [https://scryfall.com/card/2xm/235/blightsteel-colossus Blightsteel Colossus], using the same rules and counting as it for all gameplay purposes. Similar to his [[Optimus Prime (G1)/merchandise#MTGSLD|eternal rival]], Megatron is both powerful and nigh-indestructible, with a very high casting cost—but at the cost of one extra mana compared to Optimus, Megatron has the incredibly potent [[mtg:infect|infect]] mechanic, which combines with his power of 11 to let him kill a player in ''one hit'' if he isn't blocked. While the card has printing on both faces, depicting Megatron in robot mode and vehicle mode respectively, both have the same printed abilities and count as a single card for rules purposes—just choose which side you want to display when he enters the battlefield.
: The ''Optimus Prime vs. Megatron'' set also includes [[Optimus Prime (G1)/merchandise#MTGSLD|Optimus Prime]], [[AllSpark#Magic: The Gathering|The AllSpark]], and the bonus card [[Cybertron (planet)|Cybertron]].

{{--}}

==XM Studios==
*'''Starscream''' (2022)

:[[XM Studios]]' statue of Starscream is 32" tall, made of hand-painted porcelain. Starscream has different head and arm sculpts to allow owners to pose him in his "coronation" regalia and also holding a gun-mode Megatron. The set also includes a sculpted representation of Starscream's jet mode that can be displayed next to the robot.

:350 pieces were produced, with a suggested price of about $1,500 US.

*'''Soundwave''' (2022)

:Gun-mode Megatron was also one of the alternate hand-weapon options for the XM Studios statue of Soundwave.

*'''Megatron''' (2022)

:This painted porcelain Megatron statue stands 26" tall, and features alternate heads to provide different facial expressions and multiple arms for choices in posing. His accessories include not just the expected spiked flail but also a cross-continuity visitor, the [[Dark Star Saber]]. The set also includes a sculpted representation of Megatron's gun mode to be displayed next to the robot.

:258 pieces were produced, with a suggested price of about $1,600 US.

*'''Megatron Bust''' (2023)
[[File:XMStudiosMegatronBust.jpg|upright=1.66|thumb|[[Unicron/toys#Haslab|HasLab Unicron]] was for casuals!]]
:Just look at it. LOOK at it. It's a ''4-foot-tall'' bust of Megatron. 150 were made with a suggested retail of $4,000.
{{comingsoontoy}}
{{-}}

==Just Play==
{{anchor|Podpals}}
[[File:PodpalsMiniMegatron.jpg|upright=1|thumb]]

*'''Podpals Megatron''' (2023)

Made by [[Just Play]], ''Podpals'' Megatron is a rounded plush. It has tiny flaps of fabric for its legs, while other details are printed on. There are two versions, an 8 inch version and a 3 inch version. They are identical besides their size.

<ul class="iconlist">{{Bp-d1|'''Megatron''' (2022)}}</ul>
:This Megatron is a small, soft plastic figure, 2" tall, with no articulation. It's overall based on his appearance in the original cartoon.
:The packaging is G1-styled with the classic black-red gradient and the G1 Optimus Prime toy in the top right corner.

[[File:JustPlay_G1_Megatron.jpg|thumb|upright=.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (2024)}}</ul>
:This figure is identical to the original release. Unlike the original release, however, he also comes with a foil sticker on a card with a sort of profile picture on the back and text underneath it saying "MEGATRON IS THE LEADER OF THE DECEPTIONS." The foil sticker part of the card has a few miscolorations, as well as not having his iconic fusion cannon. The packaging is also different as it no longer features Optimus Prime (having been replaced with a block advertising the new card) and it has a purple gradient instead of red.
:There's a variant of this found at stores like Dollar Tree where the block advertising the card is moved to the top left with a red circle that says "$1.25" in it in the top right instead.

{{-}}

==''Transformers × Mini World''==
[[File:MiniWorldMegatron.jpg|thumb|upright=1.66]]
*'''Megatron''' (2023)
**''Accessories'': Transforming base, gun, sword, machine part, crane arm, 2 connectors

:''[[Transformers × Mini World]]'' Megatron is a tie-in to the popular [[China|Chinese]] game ''[[Mini World]]''. It comes with a display base with rolling wheels that can fold up into a cube-shaped thing that is a very rough interpretation of a tank. The figure can transform into a storage mode and store fully inside the cube, or you can remove the head and replace it with the folded up cube. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and sword accessories.

:Each set includes [[Build a Figure]]-like machinery components which can be combined with parts from other sets to make new structures.

:It is exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.
{{-}}

==Fools Paradise==
[[File:LOWFOOL League of Steel Megatron.jpeg|upright=1.66|thumb]]
*'''Megatron''' (2023)
**''Accessories'': Football

:Part of a collaboration between Hasbro and [[Hong Kong]]-based online store ZCWO, Megatron joins the "League of Steel" subline of [[Fools Paradise]]'s LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues of [[Evangelion]]s and {{w|Gundam}}s. He is depicted as a human man wearing heavily Megatron-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache.

:Preorders for Megatron opened in September 2023, with a projected release date of December.
{{comingsoontoy}}

==McFarlane Toys==
{{Anchor|PagePunch}}[[File:McFarlanePagePunchersPrimeAndMegs.jpg|upright=1.66|thumb]]
*'''Optimus Prime and Megatron''' (2024)
: ''[[Page Punchers]]'' Megatron is 3-inch non-transformable action figure based on his [[:File:RageRage-Megatronappears.jpg|IDW Autobot design]] by [[Alex Milne]], though sporting a Decepticon insignia rather than an Autobot one.

: He comes in a two-pack with [[Optimus Prime (G1)/merchandise#PAGEPUNCH|Optimus Prime]], packaged with [[New Cybertron Part 1: To Walk Among the Chosen|''Optimus Prime'' #1]] and [[Dissolution Part 6: This Machine Kills Fascists|''Lost Light'' #6]].

{{-}}
==Yolopark==
===AMK Pro===
{{anchor|AMKPro}}
[[File:YoloparkAMKProMegatron.jpeg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (AMK Pro, 2023)}}</ul>
:*''Accessories'': Stand, [[Fusion cannon]], [[Energon mace]], Laser Sword, [[Key to Vector Sigma]], Laser Pistol, 2 alternate faces, alternate chest

:Released as the first figure Yolopark's AMK Pro line, Megatron comes in pre-assembled modules as opposed to traditional model kit runners. This allows him to be assembled quickly and easily without tools. Unlike Yolopark's regular AMK line, the AMK Pro line features diecast parts and light-up features. In Megatron's case, his eyes will light up when tapping his head with a magnet, and his Fusion cannon will light up with the press of a button. His eyes require 1 CR927 battery, and his fusion cannon requires 3 AG1 batteries, neither of which is included.

:The figure was originally part of a Kickstarter campaign before reaching full release later in the year. Curiously, the prototype pictured at the time and even early review copies sent out had a different head sculpt which was refined for the final product. An "angry" alternate face was also swapped out in favor of a more detailed "neutral" face.

{{-}}{{anchor|ShanghaiWonderFesGold}}
[[File:Yolopark-TF-Shanghai-Wonder-Fes-2023-AMK-Pro-Megatron-Golden-Ver.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron Golden Colors Version''' (AMK Pro, 2023)}}</ul>
:*''Accessories'': Stand, [[Fusion cannon]], [[Energon mace]], Laser Sword, [[Key to Vector Sigma]], Laser Pistol, 2 alternate faces, alternate chest

: Available exclusively at the Shanghai Wonder Festival 2023, held on October 2-3, 2023, this Megatron is a gold redeco of the ''AMK Pro'' kit above, representing his Electrum-coated appearance.

{{-}}{{anchor|SGCCPurpleMegs}}
[[File:Yolopark-TF-SGCC-2023-Yolopark-AMK-Pro-Megatron-Purple-Version.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron Purple Version''' (AMK Pro, 2023)}}</ul>
:*''Accessories'': Stand, [[Fusion cannon]], [[Energon mace]], Laser Sword, [[Key to Vector Sigma]], Laser Pistol, 2 alternate faces, alternate chest

:Released exclusvely at the Singapore Comic Con 2023, held on December 9-10, 2023, this Megatron is another redeco of the ''AMK Pro'' kit is mostly translucent purple to represent the moment of him being reformatted into Galvatron.

{{-}}{{anchor|AMKHasbroEdition}}
[[File:TF-Yolopark-AMK-Pro-20cm-Megatron-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (AMK Hasbro Edition, 2024)}}</ul>
:*''Accessories'': [[Fusion cannon]], [[Energon mace]], Laser Sword, Laser Pistol, Stand with Ark Backdrop

:The AMK Pro Megatron kit is re-released under the "Hasbro Edition" branding. In this release, the diecast parts have been replaced with plastic, while the light-up feature, alternate faceplate, chest accessories, and Key to Vector Sigma are no longer included. In addition, Megatron's display stand also comes with an additional Ark backdrop for the arm unit. Unlike the similarly released Optimus, Megatron features painted red eyes.

{{-}}
{{anchor|AMKComboSet}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-and-Megatron-Combo-Set-(Hasbro-Edition).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Megatron and Optimus Prime Combo Set''' (AMK 2-pack, 2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Energy Mace, Light Sword, Laser Pistol, Two display stands (Teletraan-1 Backdrop, Ark Backdrop)

:The "Hasbro Edition" of the AMK Pro Megatron kit is also sold as a two-pack with the same line's Optimus Prime. The 2-pack also comes with a unique pin.

{{-}}{{anchor|AMK2025}}
[[File:Yolopark-TF-AMK-Pro-Megatron-(2025).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (AMK Hasbro Edition, 2025)}}</ul>
:*''Accessories'': [[Fusion cannon]]

: This release of the ''AMK'' Megatron is largely identical to the "Hasbro Edition" kit, but he only includes his Fusion Cannon. The only minor change from the previous ''AMK'' release is the eyes being unpainted and translucent red.
{{-}}

===AMK Mini Series===
[[File:TF-Yolopark-AMK-Mini-Series-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (2024)}}</ul>
:*''Accessories'': 2 additional pairs of hands (Splayed, Pointing)

:The ''AMK Mini Series'' Megatron is a smaller version of the character and features swappable hand parts. While he already had his fusion cannon, Megatron's default fists/item-holding hands still can accommodate some of the weapons from the same line.

:Note that the connection between the waist peg and the torso can feel slightly too tight, which gives the impression that it ''might'' potentially break when turned. If anyone is concerned, you can lightly sand the peg to alleviate the issue.

:Megatron is sold as either an individually marked single, a 2-pack with the same line's Optimus Prime in a single box, or as a blind box figure.

{{-}}
===BMK===
[[File:Yolopark-BMK-Megatron.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (2025)}}</ul>
:*''Accessories'': Fusion Cannon
:Marketed as a starter figure for the 2020s young lads, the ''BMK'' (Which stands for "Beginner Model Kit") Megatron is a 16cm version of the character, with his design based on the ''AMK/Pro'' release. As with other ''BMK''s, Megatron features similarly basic articulation, consisting of a ball-jointed head, ball-jointed shoulders, single-axis 90-degree elbows, a rotating waist, and slightly swiveling ankles...that's it.

{{-}}

==''Beyblade X''==
[[File:Beyblade_X_Transformers_Megatron.jpg|thumb]]
*'''Optimus Prime and Megatron Multipack Set''' (2024)

:'''Megatron 4-80B''' was available in a two-pack with [[Optimus Prime (G1)/merchandise#Beyblade X|Optimus Prime 4-60P]], which was exclusive to Amazon in Hasbro territories, and exclusive B4-sponsored stores in Takara-Tomy territories. It consists of three pieces that can be interchanged with those of [[Beyblade#BEYBLADE X|other ''Beyblade X'' tops]]; an attacking "Blade" primarily made of metal, a "Ratchet" that locks parts together and determines height, and a "Bit" that touches the ground and determines movement.

:The "Megatron" Blade features evergreen art of Megatron on its central Gear Chip and is partial of the mainline ''Beyblade X'' Blade "Scythe Incendio". The Ratchet (4-80) and Bit (Ball) are recolored parts from other ''Beyblade X'' tops.

:In Hasbro territories, a QR Code sticker hidden underneath the Blade can be scanned into the ''Beyblade X'' companion app. In Takara-Tomy territories, the QR Code stickers are omitted in favor of a Beycode Card packed with the instructions. However, scanning any of these QR codes only awards the player with in-app points, and will not unlock the Beyblade for in-game use like it would for any mainline ''Beyblade X'' tops.

{{-}}

==''Hot Wheels''==
{{anchor|HWSkate}}
[[File:Hot Wheels Skate Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Skate, 2024)}}</ul>
:*''Accessories'': Finger sneakers
:Part of the ''[[Hot Wheels (franchise)|Hot Wheels]] Skate'' subset made by [[Mattel]], this is a Megatron-themed finger skateboard that comes with a pair of purple finger sneakers. The shape and packaging use Dreamwave-era artwork of Megatron.

{{-}}

==''Authentics''==
{{anchor|CBmegatron}}
[[File:Authentics Cyber Battlers Megatron.jpeg|upright=1|thumb]]
*'''Cybertron Battlers Megatron''' ([[2022]])
:Released in the ''Cybertron Battlers'' subline of ''Authentics'', this vinyl figure is a non-transforming, 5.5 inch rendition of Megatron in his evergreen design with limited points of articulation. In tradition, he has his trademark fusion cannon molded into his right arm.

:He comes packaged either individually with a tag, or in twos in a box together with [[Bumblebee (G1)/merchandise#Authentics|Bumblebee]] and [[Optimus Prime (G1)/merchandise#Authentics|Optimus Prime]].
{{-}}

{{anchor|Teeturtlereverse}}
[[File:Reversible_Megatron_Teeturtle.jpg|upright=1|thumb]]
*'''Reversible Plushie Megatron''' (2025)

:Released by [[TeeTurtle]], ''Reversible Plushie'' Megatron is a round, [[super deformed]] plush, that can be turned inside out to reveal a tank alternate mode. It is 3 inches tall and exclusively available from blind boxes. It appears to be based on Megatron's [[evergreen]] design.
{{-}}

==Blokees==
===Galaxy Version===
{{anchor|Galaxy Version}}
[[File:Blokees-TF-Galaxy-Ver-01-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Galaxy Version, 2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' 2 pairs of hands (Weapon-holding/fists, open-palm), pointing left hand, Blast Effect, spare peg-and-ball piece, spare ball-and-ball piece, black stand, 1 pair of Autobot/Decepticon symbols

:Released in the First Wave of ''[[Blokees]]''' Galaxy Version line of blind boxes, this Megatron is a four-inch-tall, articulated, and non-transforming snap-on model kit of the Decepticon Leader. Like many other ''Blokees'' figures, Megatron uses a "Standard Body" as a skeleton, in which pieces are attached to make it look like different characters.

:Like many other Blokees figures, Megatron includes a stand with four studs he can connect to.

{{-}}{{anchor|GVParallelUniverse}}
[[File:Blokees-TF-Galaxy-Version-06-IDW-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Megatron''' (Galaxy Version, 2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, blast effect

:The sixth wave of the ''Galaxy Version'' blind boxes features an all-new kit of Megatron based on [[Alex Milne]]'s design in IDW's "''More Than Meets The Eye''" comics, In addition to the new hand runner introduced in the 4th wave, Megatron comes with a purple version of the newly-tooled blast effect. Like the other 'Galaxy Version' kits since Wave 5, Megatron features a slightly upgraded suite of standard body parts, notably the sturdier, pre-assembled hinge joints and the multi-colored head with color-coded eyes. As advertised in the box, he has a pull rate of 1 in every 9 boxes.

: Unlike the other figures in the ''Galaxy Version'' Transformers line, this Megatron features a unique pair of comic-accurate forearm parts. These parts are not designed to interact with other accessories of the same peg size, except for the Fusion Cannon, which is exclusive to the right forearm. Speaking of the Fusion Cannon, exercise some caution while posing the right arm, as you may easily slide down and pop off the cannon from the forearm.

:If you're a speed builder, be mindful when attaching the pre-assembled joints; Unlike the symmetrical joints from earlier waves, the pegs on both ends of these joints are designed to connect to specific pieces; The tabs with slightly smaller holes are intended for the upper arms and thighs, while the regular tabs are meant for the forearms and lower legs. While an incorrect knee joint assembly may cause it to very slightly lean when standing straight or in an A-stance, an incorrect elbow assembly won't be noticeably affected unless you're looking very closely.

:The product website mislabels his alternate mode as a sports car instead of a tank, which is copied and pasted from Sunstreaker's profile.

{{-}}
[[File:Blokees-TF-GV09-Megatron.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 09 - ???'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), energy sword

:The ninth wave of the ''Galaxy Version'' blind boxes features a new redo of Megatron, and he also comes with an energy sword he used in ''The Transformers: The Movie''. In addition to the ball-jointed waist from the previous entry, Megatron also features updated articulation, including a slide-down hip joint axis, rotating upper thigh joints, and improved double-jointed knee articulation, similar to his wave mates.

:Because the newly designed knee joints are made to fit the narrow gaps in the thighs and lower legs, they are incompatible with joints from previous releases, including those used for the elbows.

:Along with Bombshell, Megatron is first revealed at Blokees' booth at the China Toy Expo 2025 event.
{{comingsoontoy|December 2025 release}}
{{-}}
===Shining Version===
{{anchor|Shining Version}}
[[File:Blokees-TF-Shining-Version-01-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Shining Version, 2024)}}</ul>
:*''Series:'' '''Shining Version 01 - Shining Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (Weapon-holding/fists, open-palm), pair of Autobot/Decepticon symbols, Energon Mace

:Released in the first wave of Blokees' ''Shining Version'' line, this edition of the original ''Galaxy Version'' mold now features painted translucent face parts to accommodate with a torso frame that lights up upon shaking (or at least just ''lightly'' tap some areas on the torso), causing the eyes to glow for a limited time. In addition to his identical accessories from the ''Galaxy Version'' release, Megatron also comes with an Energon Mace, a single Energon Cube, and a new, larger figure stand.

{{-}}{{anchor|Blokees Metallic}}
[[File:Blokees-TF-Shining-Version-01-Secret-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Metallic Megatron''' (Shining Version, 2024)}}</ul>
:*''Series:'' '''Shining Version 01 - Shining Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (Weapon-holding/fists, open-palm), pair of Autobot/Decepticon symbols, Energon Mace

:The chase figure of the first ''Shining Version'' line with a much slimmer pull rate of 1 in every 36 boxes, i.e. once in four cases, this Megatron is redecoed in a metallic sheen save for the joint pieces along with some additional deco patterns such as the burnt Fusion Cannon barrel, and he comes with the same accessories as his regular ''Shining Version'' counterpart.
{{-}}{{anchor|ShatteredUniverseMiner}}
[[File:Blokees-TF-SV-03-Miner-Megatron.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-multi|'''Miner Megatron''' (Shining Version, [[2025]])}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' 2 pairs of hands (fists/accessory-holding, splayed open-palm), Pickaxe, Drill, figure stand

:The third wave of Blokees' ''Shining Version'' line features a new kit of Megatron, modeled after his Miner body in IDW's "Chaos Theory" comic. He also comes with two accessories: A drill and a pickaxe.

{{-}}{{anchor|ShatteredUniverseChase}}
[[File:Blokees-TF-SV-03-Gladiator-Megatron.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-multi|'''Gladiator Megatron''' (Shining Version, [[2025]])}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' 2 pairs of hands (fists/accessory-holding, splayed open-palm), Pickaxe, Drill, figure stand

:The chase figure of the third ''Shining Version'' line with a much slimmer pull rate of 1 in every 36 boxes, this Megatron is a redeco/retool of the Miner Megatron kit to resemble his Gladiator self in "Megatron Origin". In addition to the reused pickaxe, Megatron comes with a different drill accessory.
{{-}}

===Action Edition===
[[File:Blokees-TF-Action-Edition-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Action Edition, 2024)}}</ul>
:*Accessories: 4 faceplates, Fusion Cannon, Energon Mace, Energy Sword, Energon Pistol, Laserbeak, Reflector Camera, Kremzeek figurine, display stand (with two adapters), Nemesis Throne, magnet-powered faction symbol block

:The "Action Edition" Megatron is a 7-inch (approx 18cm) model kit with a slightly more complex build and features an inner frame (equivalent to the ones used for ''Bandai'''s "Master/Perfect/Real Grade" kits) with greater articulation points than his other ''Galaxy Version'' toys. In addition to his signature weapons from both the cartoon and the 1986 movie, Megatron also comes with 3 additional faceplates to swap with, a Reflector camera, a Laserbeak figure, a Kremzeek figurine, a Nemesis Throne, and a display stand with two adapters for either Megatron or Laserbeak. A magnetic component in his faction symbol block activates the light-up features that illuminate his eyes. Unlike Action Edition Optimus, Megatron utilizes fully articulated fingers.
{{-}}

===Defender Version===
{{Note|Every case comes with a random Commemorative Card, with 10 Common, 1 Gold, and 1 Silver for each out of every 12 cards.}}
[[File:Blokees-TF-Defender-Ver-01-Megatron.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Defender Version, 2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''

:Released as part of the first wave (and one of the headline figures) of the ''Defender Version'' line of blind boxes, this Megatron is a 2.2-inch (5.5cm) figure, a few inches smaller than the ''Galaxy Version'' kits, but still articulated. Unlike his ''Galaxy Version'' kit, Megatron only comes with his signature Fusion Cannon.

:As with all robot mode kits from this line, Megatron features color-coded eye parts, which double as the neck's socket joint.

{{-}}{{anchor|SpecialGalaxyType}}
[[File:Blokees-TF-GV-Defender-01-Special-Galaxy-Type-Megatron.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-d1|'''Special Galaxy Type Megatron''' (Defender Version, 2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''

:One of the two chase figures of the line, the "Special Galaxy Type" Megatron is a metallic redeco of the figure above, and he also features thoroughly painted details to make him more accurate to the show. Like Optimus, he has a much slimmer pull rate of 5 in every 144 boxes.

{{-}}{{anchor|SpecialArmorType}}
[[File:Blokees-TF-Galaxy-Version-Defender-01-Megatron-Fully-Armed.jpg|thumb|250px|He is the storm that is approaching.]]
<ul class="iconlist">{{Bp-d1|'''Special Armor Type Megatron''' (Defender Version, 2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Left Fusion Cannon, Wing Pack

:The "Special Armor Type" version of the Megatron kit is an alternate version of the Special Galaxy Type chase figure, decked out in metallic paint, and comes with additional armaments such as the backpack based on his appearance in IDW 2005's [[The Transformers: Stormbringer|''Stormbringer'']] limited series, and the newly-tooled left forearm to accommodate the extra cannon. Unlike the chase variant above, this Megatron has an '''''even''''' slimmer pull rate of '''1''' in every 144 boxes.

{{-}}{{anchor|Brilliant}}
[[File:Blokees-TF-Defender-Version-03-Brilliant-Megatron.jpg|thumb|250px|Who needs the Fusion Cannon when you have a pair of Shining Fingers, Kicks, and...thighs. Huh.]]
<ul class="iconlist">{{Bp-d1|'''Brilliant Megatron''' (Defender Version, 2025)}}</ul>
:*''Series:'' '''Defender Version 03 - Heavy Metal War'''

:The third wave of the ''Defender'' kits features a redeco of the first wave's Megatron in his "Brilliant"-themed coloration, in opaque gold, and translucent yellow for the fists, thighs, and feet. In addition, Brilliant Megatron also utilizes the front crotch and shin tampographs from the first wave's Special Galaxy Type kit.

{{--}}

==Auldey==

[[File:Auldey-TF-AAE-Megatron.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron''' (Alpha Action Elite, 2025)}}</ul>
:*''Series:'' '''Attack on Earth'''
:*''ID Number'': '''AAE-010'''
:*''Accessories:'' 4 pairs of hands, trading card
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Megaton is a 5-inch non-transforming but highly articulated action figure. His back canon can be twisted under his arm, similar to the original toy. Oddly he comes with a spare pair of hip joints.
:As advertised in the box, the lineup had a 11/72 probability of getting Megatron.

{{-}}{{anchor|auldeymetallic}}
[[File:Auldey-TF-AAE-MegatronMetallic.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-d1|'''Megatron (Metallic Color)''' (Alpha Action Elite, 2025)}}</ul>
:*''Series:'' '''Attack on Earth'''
:*''ID Number'': '''AAE-009'''
:*''Accessories:'' 4 pairs of hands, large sword, trading card
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Megaton is a 5-inch non-transforming but highly articulated action figure. This chase figure is a toy based repaint of the standard Megatron figure, with metallic paint and stickers and a toy based head sculpt. His back canon can be twisted under his arm, similar to the original toy. In addition to the spare hands, he comes with a large sword.
:As advertised in the box, the lineup had a 1/72 probability of getting this variant.
{{-}}

{{-}}{{anchor|auldeyformatl}}
<ul class="iconlist">{{Bp-d1|'''Megatron (Reformatting version)''' (Alpha Action Elite, 2025)}}</ul>
:*''Series:'' '''The Demon Star Approaches'''
:*''ID Number'':
:*''Accessories:'':
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Megaton, a 5-inch non-transforming but highly articulated action figure, is a repaint of the above figures, based on the scene from [[The Transformers: The Movie]] when he was transformed into [[Galvatron (G1)/toys|Galvatron]] by [[Unicron]].

{{comingsoontoy}}
{{-}}

==Ty==
* '''Beanie Bouncer Megatron''' (2025)
[[File:bouncer-mt.jpg|thumb|200px|]]

:A bouncing ball covered in fur produced by Ty, creator of the more famous Beanie Babies and Beanie Boos. The bottom of Megatron's helmet is represented by additoinal pieces of felt material coming out of the ball. Opposite the face is an Decepticon symbol.

:Megatron is also available in a three set alongside Optimus Prime and Bumblebee.

==References==
{{Reflist}}

[[Category:Attacktix]]
[[Category:Bitfig]]
[[Category:Combiners]]
[[Category:Decoys]]
[[Category:Generation 1 Decepticons]]
[[Category:MyClone]]
[[Category:Robot Heroes]]
[[Category:Transformers Character Card Decepticons]]

Optimus Prime (G1)/merchandise

2025-10-27T17:03:53Z

Leia G:

{{suite}}

'''Optimus Prime''' is a bit of a shill.
==Stamp Bot==
[[File:OptimusPrime-StampBot-1984.JPG|thumb|Truck stamp is cool!]]
*'''Optimus Prime''' (1984)
:Made by [[HG Toys]], Stamp Bot Optimus Prime is a small, non-poseable figurine of Optimus Prime based on his toy with a rubber stamp on the base, and a cap with a felt "floor" that was soaked in ink. The stamp made an image of Optimus Prime's cab mode.
{{-}}

==The Transformers Cookie Jar==
*'''The Transformers Cookie Jar''' (1984?)
:A ceramic cookie jar in the likeness of Optimus Prime's head. The top of Prime's head lifts off for the storage of delicious baked goods or Energon or what-have-you. The cookie jar was manufactured by [[Great American Housewares]] under license from [[Hasbro]].
::*''[http://www.tfw2005.com/boards/transformers-toy-discussion/179468-optimus-prime-cookie-jar-price-check.html Images of The Transformers Cookie Jar at TFW2005]''
{{-}}

==Collegeville Costumes==
{{anchor|CollegevilleG1}}
*'''Optimus Prime''' (1984)
:Although [[Collegeville Costumes]] only released a small number of Transformers [[Halloween]] costumes, and made some odd choices for characters to depict in the process, Optimus Prime was an obvious choice as one of their first releases. The costume consists of a thin plastic facemask based directly on the Optimus toy's head complete with yellow eyes, and an orange and yellow plastic smock decorated not with the details of Optimus' body, but with his package art and the Transformers logo.

*'''Optimus Prime''' (1993)
{{anchor|CollegevilleG2}}
:Optimus Prime recieved a second costume from Collegeville for their line of ''[[Transformers: Generation 2 (franchise)|Transformers: Generation 2]]'' line. As with the 1984 Collegeville costume, it consists of a thin plastic mask held on by elastic. Unlike the previous costume, the plastic smock is now decorated with the details of Optimus' G2 body, as well as having his name and the G2 logo on it.
{{-}}

==Vehicle Play Tent==
[[File:Vehicleplaytent.jpg|thumb|Both a big truck ''and'' a series of tubes.]]
*'''ERO''' (1984?)
:The Vehicle Play Tent was part of the deluge of Transformers merchandise in the 80s. The tent was constructed by means of a series of plastic tubes that fit into sockets on corner pieces (similar to the "k'nex" building system that arrived a few years later), then a vinyl cover was slipped over this PVC skeleton to make the tent.
{{-}}

==Oral Care Station==
*'''Optimus Prime Oral Care Station''' (1984/85?)
:An electric toothbrush in the likeness of Optimus Prime. A battery-operated feature causes the toothbrush (attached at Prime's left wrist) to move back and forth. The set also included a cup for [[water]], an extra brush head, and a stand to hold the various accoutrements.
::*''[https://www.flickr.com/photos/14985789@N07/3207711517/?rb=1 Image at Flickr.com]
::*''[http://fredsworkshop.com/oral.html Images of the Oral Care Station in-box at FredsWorkshop.com]''
{{-}}

==Transformers Milk Caramel==
[[File:Tfcaramel optimus prime.jpg|thumb|upright=1.66|Note: Do not eat! ... the candy. The toys taste better.]]
*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A small soft-rubber figurine (known as a ''keshigomu'' in Japan) of Optimus Prime was released as part of [[Kabaya]]'s line of ''[[Transformers Milk Caramel]]'' [[candy toy]]s. Like all the figures from the 1985 range, Prime came blindpacked, and was available in a variety of colors including white, blue, yellow, green and orange. As the name of the series suggests, he came with a piece of caramel candy.

*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A second Optimus Prime ''keshigomu'' was included in the second wave of ''Milk Caramel'' figures, sporting some broader proportions and more toy-based design cues like visible wheels, holding its gun in its left hand, rather than its right. This figure was available in red, yellow and blue variations; a baffling variant is known to exist with a ''Decepticon'' symbol on its left shoulder!

*'''Convoy''' (1985)
**''ID number:'' '''2'''
:The second ''Milk Caramel'' wave also contained a third Optimus Prime figure, largely identical to the second, except with its gun in its right hand, and holding its left arm aloft. Again, this figure was available in red, yellow and blue variations.
{{-}}

==Transformers Choco==
[[File:Tfchoco optimusprime.jpg|thumb]]
*'''Convoy''' (1985)
:A small solid-color snap-together model kit of Optimus Prime was released by Kabaya as part of their ''[[Transformers Choco]]'' line, coming packaged with small chocolate candies similar to [[M&M's]] called "Chocolate Dots". The kit can transform from robot to vehicle mode, though this version of Prime doesn't have any hands.

*'''Convoy''' (1985)
**''Accessories:'' Two fists
:A second ''Choco'' version of Prime was upsized from the first a little, and was given a pair of removable fists, the right one clutching Prime's [[ion blaster]].
{{-}}

==Transformers Gum==
[[File:Tfgum optimusprime.jpg|thumb|upright=1.66]]
*'''Convoy''' (1985, 1997)
**''Accessories:'' Two fists, ion blaster
:In addition to the small ''Choco'' model kit, Kabaya also released a larger version of Prime under their ''[[Transformers Gum]]'' line. Essentially a downsized version of the original Prime toy (sans trailer), the kit is sculpted from black, red, and grey plastic, features stickers rather than paint applications for details, and came with a stick of gum.

:This kit was reissued in 1997 by might-or-might-not-be official Transformers licensee [[ToonTown]] in [[South Korea]] (possibly, in a 2-pack with a reissue of ''Transformers Gum'' [[Soundwave (G1)/merchandise#Transformers Gum|Soundwave]] <ref>[http://fuwakudou.web.fc2.com/prisoners06.html One source] mentions obtaining two boxes of the ToonTown ''Transformers Gum'' releases with each containing two kits - the one numbered #1 featuring Optimus Prime and Soundwave and the one numbered #2 featuring Sideswipe and Starscream - but considering that none of the other (albeit admittedly very few) sources that discuss these kits mention a similar arrangement, it is possible that this was either a packing mistake or simply already-opened boxes being sold on the secondary market with two loose kits stuffed into them (the article does not specify whether or not the boxes they obtained were sealed, although they do look new-ish in the provided pictures). Still, considering how very little information exists regarding these releases in general, it will nonetheless be noted here that these kits ''might'' have been released as 2-packs at some point.</ref>), looking mostly identical save for a set of cheaper-looking paper decals.
{{-}}

[[File:Tfgum2010 g1prime.jpg|thumb|upright=1.66|My limbs need to be horribly mutilated and rearranged to change forms!]]
*'''Convoy''' (2010)
**''Accessories:'' Ion blaster
:The first wave of 2010's revival of the ''Transformers Gum'' series served up a double dose of Prime, beginning with this new model kit of the original Generation 1 version of the character. Sculpted from white, red, and blue plastic, the kit features a positively ''ungodly'' amount of stickers to make it look presentable and comes with Prime's traditional ion blaster weapon, which stores on the rear of his cab in vehicle mode.

:In terms of transformation, Convoy partially [[partformer|partforms]], as the forearms are needed to be removed and attach it back during conversion.
{{-}}

[[File:Tfgum2010 henkei prime.jpg|thumb|upright=1.66|So do mine!]]
*'''Convoy''' (2010)
**''Accessories:'' Smokestacks/laser cannon
{{toydesigner|[[Naoto Tsushima]] (packaging artist)}}

:The second Prime figure in the 2010 ''Gum'' line was this kit of his ''[[Transformers: Classics|Classics]]''/''[[Henkei! Henkei! Transformers (franchise)|Henkei! Henkei!]]'' body. As with the Generation 1 model, this figure is made from white, red and blue plastic and uses ''lots'' of stickers. It comes with the ''Classics''' figure's transforming smokestack/laser cannon weapon.

:Much like his aforementioned G1 self, his arms also need to be partformed into robot mode.
{{-}}

[[File:Tfgum2014_g1starconvoy.jpg|thumb|upright=1.66|But not mine!]]
*'''Star Convoy''' (2014)
**''Accessories:'' Cannon, Roller/ treads, car mode Hot Rodimus

:Released as part of the 8th wave of Kabaya's 2009 series of standard model kits, Star Convoy is a snap-together model kit that can transform into a futuristic big rig. Like the full-sized Star Convoy toy, this model kit can assume a battle station mode and also includes a diminutive and non-transformable Hot Rodimus in car mode that can interact with the base mode ramps. Like most other Kabaya model kits, Star Convoy has no paint applications and relies on stickers for added details.

:Owing to the original toy's simple engineering, Star Convoy does not require any disassembly to transform into robot mode, making him one of the few non-partforming Kabaya figures. He does, however, need to have his Microcarrier wheel base detached (which was also an option on the original toy) to fully access a significant improvement over his older self: some newly-added leg articulation! The Microcarrier also doubles as a shield that can be attached to the robot's left arm.
{{-}}

==Hero Set==
*'''Convoy''' (1985)
**''ID number:'' '''01'''
**''Accessories:'' Laser rifle
:A large ''keshigomu'' of Optimus Prime was produced by TakaraTomy licensee [[Maruka Toys]]. Packaged on a blister card, the static, unposeable Prime figure came with a removable laser rifle, and featured a few small stickers for colour and detail. Maruka also produced a Megatron figure in the same scale, and both Prime and he were available in red, yellow or green.
{{-}}

==Decoy==
[[File:Decoy optimus prime.jpg|thumb]]
*'''Cybertron Hero Collection 22''' (multi-pack, 1986)
*'''Defeat Trypticon Strategy Game''' (board game, 1986)
:Optimus Prime was among the many characters rendered by [[TakaraTomy|Takara]] as part of their series of 1.5" ''keshigomu'' figurines. Like all the Autobots in the series, Prime was molded in soft red rubber, and featured a number sculpted into his back that was the sum total of his [[Tech Spec]]s, for use in the various games that could be played with the figurines. Prime was available as part of a 22-piece box set of Autobot figures, as a playing piece in the Defeat Trypticon Strategy Game, and later, in a peach coloration randomly packed as part of various other box sets.

*'''Optimus Prime''' (1987)
**''Checklist number:'' '''31'''
:The Prime figurine was later brought over to [[Hasbro]] markets as part of the "[[Decoy (G1)|Decoy]]" promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (31, in Prime's case). Like all Autobot Decoys, he was a randomly-chosen pack-in available with the carded [[Throttlebot]]s, [[Aerialbot (G1)|Aerialbots]], [[Protectobot (G1)|Protectobots]] and [[Technobot (G1)|Technobots]].

::*''[http://www.tfu.info/1986/Autobot/Decoys/OptimusPrime/optimusprime.htm More information on Decoy Optimus Prime at TFU.info]''
{{-}}

==Knitting Pattern==
[[File:Transformers-knitting-pattern.JPG|thumb|Here to transform your sweater into something that will get your ass kicked.]]
*'''Wendy DK 3015''' (1986)
: Produced by U.K. company [[Wendy DK]] and designed by [[Joy Gammon]], this pamphlet contained patterns for two ''Transformers''-themed sweaters, one featuring Optimus Prime in robot mode, one featuring Optimus Prime in vehicle mode. The patterns were sized as Children's Large, so you're going to have to upscale it quite a bit if you want your <s>girlfriend</s> mom to knit you one.
{{-}}

==Vinyl figurine==
[[File:Optimus Prime Vinyl Figure set.jpg|thumb|upright=1.66|Vinyl Prime leads his decoys into battle [[Action Master|before the great storm]].]]
*'''Scramble Gun Set''' (1986)
**''Japanese ID number:'' '''Part.1'''
:Optimus Prime was one of several characters released by [[Seven]] and Takara as large vinyl figurines in a variety of different novelty sets. Prime came packaged with a roleplay pistol (the titular "Scramble Gun"), an Autobot badge, and four randomly assigned peach-colored decoy figures. In [[Ultra Magnus (G1)/merchandise#Vinyl figurine|"Part.2"]] of the set Prime is replaced by a vinyl Ultra Magnus.{{-}}

==Gold Convoy Trophy==
[[File:Gold Convoy Trophy.jpg|thumb|Thou will worship this golden convoy. Or Perish!]]
*'''Optimus Prime''' (trophy, 1988)
:A gold chrome trophy in the likeness of Optimus Prime was given as an award to an unknown number of distinguished [[TakaraTomy|Takara]] employees and as a [[Lucky Draw figure|Lucky Draw]] (alongside the [[Chromedome (G1)|Silver Chromedome Trophy]]) in [[TV Magazine]] in 1988. The two different releases have different plaques but appear to be otherwise identical. If you're an Optimus Prime merchandise completist, good bloody luck finding this one.
{{-}}

==''Generation 2''==
*'''Optimus Prime''' (Dairy Queen promotion, 1994)
[[File:DairyQueen Optimus.jpg|thumb|Rare, in a raw chicken sort of way.]]
:Released in Dairy Queen's 'Kid's Pick-Nic!' meals in 1994, this hunk of red and blue plastic is the first known Optimus Prime kids' meal toy and also probably the worst, sporting no transformation and zero articulation of any sort, with an included sticker sheet for detailing that doesn't particularly resemble any iteration of the character.

:These can be pretty hard to find, owing to their limited distribution compared to the average fast food promotion. Being pretty forgettable as toys probably didn't help either, if we're being honest.
{{-}}

*'''Optimus Prime Inflatable Bop Bag'''
[[File:OptimusPrime_G2_Inflatable_Bop_Bag.jpg|thumb|At last, merchandise for Decepticons!]]
:Released in 1993 by Kid Dimension, a subsidiary of Hasbro,<ref>[http://www.fundinguniverse.com/company-histories/hasbro-inc-history/]</ref> this 3 foot tall Inflatable Bop Bag featured the likeness of Optimus Prime above the Transformers Generation 2 logo. Supposedly to encourage kids to punch out Optimus Prime?
{{-}}

===ToonTown===
{{note|There's a longstanding debate on whether the obscure Korean-exclusive [[ToonTown]] figures and merchandise, allegedly released under official Hasbro licensing according to their packaging, are actually legitimate Transformers products or just bootlegs with fraudulent copyright information. Although there isn't a clear consensus from collectors and no statement from Hasbro on this matter as of {{CURRENTYEAR}}, we have nonetheless chosen to cover them here for the sake of archival and posterity.}}

[[File:Midam-Prime.jpg|thumb|upright=1.66|Maybe a licensed product, maybe a bootleg. Maybe it's in our definition of "toy," maybe it's "merchandise." ToonTown needs a {{w|Eddie Valiant|detective}}!]]
{{anchor|MidamIndustry}}
<ul class="iconlist">{{Bp-a2|'''Optimus Prime''' (Model kit, 1997)}}</ul>
:*''Accessories'': Blaster, left & right fists
: Notoriously odd [[South Korea]]n company ToonTown licensed the ''Transformers'' brand to model kit manufacturer [[ToonTown#Items released by Midam Industry|Midam Industry]], which in turn put out this surprisingly detailed and robust kit of the original Generation 1 Optimus Prime figure. It is fully transformable and about 3/4ths the size of the original toy. He does not feature his trailer, and his weapon design is substantially different from either of his classic blasters.

: Three color morphs have been found so far: original red arms and torso with blue head and legs, a mirrored version with red head and legs and a blue torso and arms, and one with all the aforementioned parts in blue.<ref>Reviews for a [https://m.blog.naver.com/eoiipp/130144214329 "standard"-colored Midam Optimus kit], an [https://blog.naver.com/parang16/20041871808 "inverted"-colored Midam Optimus kit], and an [https://blog.naver.com/nckim/70101680088 all-blue-colored Midam Optimus kit] on blog.naver.com</ref> This suggests that the colors which make up the two batch of parts might be randomized between blue and red, and as such; an as-of-now undocumented all-red version might also exist. All of his versions also have their chrome parts painted in metallic gold, a common oddity across ToonTown Primes as seen in the previous LALA figure.

: The figure comes with a batch of rather weird stickers, with text on his license plate and the sides of his truck mode that refers to him as "[[gbwiki:Dump Robo|Dump Robo]]".
{{-}}

[[File:LALA-PrimePencilCase.jpg|upright=1.66|thumb|Pope Leo XIV might have been selected on the
day that this image was uploaded, but pencil case Optimus might be the holiest thing that I've seen all day, hahaha... I'm going to hell, aren't I?]]
*'''LALA Pencil Case''' (1997)
:Possibly one of the most majestically quirky pieces of merchandise to have graced any Transformers character ever, this incredible pencil case from ToonTown licensee [[ToonTown#Items released by LALA|LALA]] is generally based around the design and transformation of the original Generation 1 Optimus Prime toy, but with ''a lot'' more than meets the eye to it: on top of being fully transformable from his robot mode to (an albeit rather flat) truck mode, he folds open to reveal space for the storage of several pencils and/or pens of your choosing, as well as including printed stickers for a time table and an address book, a drawer for the storage of extra school supplies, and a hidden thermometer that's revealed by lowering his head!

:Pencils can be attached to his shoulders to imitate his smokestacks, and his fists, which are removable for the transformation like in the original toy? They're erasers! Gah, how can an obscure, maybe even potentially fake piece of merchandise from 1990s South Korea have this much soul and creativity put into it! The fists can even be stored below the truck's front portion in vehicle mode, guaranteeing that you never lose them.

:He also includes a sticker sheet and a small 20cm ruler, featuring packaging art of himself plus ''Generation 2'' [[Megatron (G1)|Megatron]], [[Sideswipe (G1)|Sideswipe]], and [[Ramjet (G1)|Ramjet]], as well as pictures of their respective LALA eraser versions (the one for Optimus coming right up).
{{-}}

*'''Eraser''' (1997)
:Another piece of merchandise from ToonTown licensee LALA, this eraser also doubles as a small simple model kit, with his large colored bits being the "eraser" portion and the remainder of the toy being constituted of grey plastic parts that are assembled together. He transforms from robot to vehicle and back by [[Partformer|partforming]] his individual components.

:Although the advertisements and aforementioned ruler (as well as the few copies that we know of) feature his eraser bits in pink, it is possible that he might have also been released in bright green, as other LILA erasers that also show up as pink in promotional images have been found with this color instead.
{{-}}
*'''Watch''' (1997)
:Yet another LALA product, this Optimus Prime watch "transforms" by folding out of its compressed half-form and standing up as a simple fully-fledged little robot. His chest opens to reveal the titular watch. Said chest, along with his head, have an unusual gold chrome deco (a commonality across a handful of ToonTown products), and the box art is painted accordingly to reflect this.
{{-}}

==''Metalforce''==
[[File:MetalforceConvoy.jpg|thumb|I'm expensive! ''(Metallic Version Pictured)'']]
*'''Convoy''' (1999/2000)
**''Japanese ID number:'' '''MFC-01'''
**''Accessories:'' Ion Blaster, Autobot Matrix of Leadership, alternate hand, unpainted rifle, Matrix, helmet and hand

:''Metalforce'' Convoy is a large vinyl figurine produced by [[Time House]] sculpted to very closely resemble Optimus Prime as he appeared in the original television series, and at the time was the most accurate product depiction of Optimus Prime's cartoon appearance.

:The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his [[Matrix of Leadership/toys|Matrix of Leadership]], as is a ''[[The Transformers: The Movie|Movie]]''-style Matrix cover (not pictured). He also comes with an alternate hand that allows him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands, and helmet, which probably meant for those who wanted to duplicate them with resin and/or wish to modify/paint them...you know how garage kit modellers do.

:Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colors of the actual series, and a metallic-paint version (pictured), which is less [[show-accuracy|show-accurate]] but more shiny. The plain-colors version was the first release and have an Autobot symbol tampograph on his shoulder as per [[The Transformers (cartoon)|the cartoon]], while the later metallic-finish version instead came with a decal sheet.

{{-}}

==''Choro-Q''==
*'''Convoy''' (2000)

:''[[Choro-Q]]'' Convoy is a [[redeco]] of the Domra Truck toy from Takara's ''Choro-Q'' toyline of non-transforming [[super deformed]] vehicles. He was an [[exclusive]] at [[BotCon]] Japan 2000, and features a [[pull-back motor]] and a rear license plate that reads "BotCon Japan 2000".

:Along with ''Choro-Q'' [[Mirage (G1)|Ligier]] and [[Megatron (G1)/toys|Megatron]], Convoy was given out randomly to convention attendees. Each toy was limited to 1000 pieces.

==Super Collection Figure==
[[File:SCF Optimus.jpg|upright=1.66|thumb|#IGotPrimeOnIt]]
*'''Convoy''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

: A three-inch tall [[plastic|PVC]] figurine of Optimus Prime was available as part of the first wave of [[TakaraTomy|Takara]]'s ''[[Heroes of Cybertron (toyline)|Super Collection Figure]]'' line. Like all the figures in the wave, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve [[blindpacking|blindpacked]] figures.

{{-}}{{anchor|SCFaxe}}
[[File:SCF Optimus chase axe.jpg|upright=1.66|thumb]]
*'''Convoy with Ax''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

:Also available in the first ''Super Collection Figure'' wave was a rare "Secret Figure" version of Optimus (斧付きコンボイ, ''ono-tsuki konboi''), decorated in metallic paint and replacing his gun-wielding right hand with his [[energon-axe]].

: It was ''presumably'' released at a ratio of one per every ten cases; while this has not been officially confirmed, later waves gave these odds for Secret Figures.

{{-}}{{anchor|SCFtrailer}}
[[File:SCF Optimus Truck.jpg|upright=1.66|thumb|We're just as confused as you are, folks.]]
*'''Convoy (Trailer Mode)''' (2000)
**''Act'': '''2'''

:Part of the second ''Super Collection Figure'' act, this is the only ''SCF'' figure of a vehicle mode Transformer. As with the previous non-chase Prime figure, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve blindpacked figures.

: Unlike every other figure in the line (excluding build-a-figures), this one does ''not'' come with a figure stand, because... well, what would be the point?

{{-}}{{anchor|SCFMegaGun}}
[[File:SCF Optimus chase jetpack.jpg|upright=1.66|thumb]]
*'''Megatron & Convoy''' (2000)
**''Act'': '''2'''
**''Accessories'': Stand

:The second ''Super Collection Figure'' wave, like the first, also had its own Optimus Prime chase figure, this one wielding Megatron in gun mode and wearing [[Sideswipe (G1)|Sideswipe]]'s [[jet pack|rocket pack]], as seen in the [[The Transformers (cartoon)|original ''The Transformers'' cartoon]] episode "[[More than Meets the Eye, Part 3]]".

: This was presumably also released at a ratio of one per every ten cases.

{{-}}{{anchor|SCFdamage}}
[[File:SCF Optimus chase damage.jpg|upright=1.66|thumb]]
*'''Damaged Convoy''' (2001)
**''Act'': '''3'''
**''Accessories'': Stand

:There was no mass-release Optimus Prime figure for the third ''Super Collection Figure'' act, but there was another rare chase figure, this time a battle-damaged version of the original figure from the first act, referencing his injuries from ''[[The Transformers: The Movie]]''.

: Again, it was ''probably'' released in one out of every ten cases. He replaced the clear version of [[Bumblebee (G1)/merchandise#Super Collection Figure|Bumblebee]] in the case.

{{-}}{{anchor|SCFcom}}
[[File:SCF Optimus Comm.jpg|upright=1.66|thumb|He's actually checking his makeup.]]
*'''Convoy (B)''' (2001)
**''Act'': '''4'''
**''Accessories'': Stand

:For the fourth ''Super Collection Figure'' wave, Prime was rendered weaponless, speaking into the open communication panel on his left arm. Like all the figures in the fourth wave, Prime was available in both standard full color and metallic silver "pewter" versions, one of each of which was available in a standard case of twelve blindpacked figures.

: Care should be taken when moving the joints of the pewter version, as is not uncommon for the connector pegs to have gotten painted as well, resulting in stuck limbs and tearing joints. Shaving the interior of the socket slightly with a hobby knife is usually sufficient to relieve the issue. (This holds true for all other pewter figures on this list, and in fact the entire dang line from here on.)

: In eight out of every ten cases, the pewter version of Prime came packaged with the left arm of the collectible [[Metroplex (G1)#Super Collection Figure|Metroplex]] build-a-figure; these parts were either in full color or clear-plastic, packed at an equal ratio of four out of eight cases.

{{-}}{{anchor|SCFSilverMatrix}}
[[File:SCF Optimus chase silver.jpg|upright=1.66|thumb]]
*'''Convoy''' (2001)
**''Act'': '''5'''
**''Accessories'': Stand

:This version of Prime was a chase figure in the fifth ''Super Collection Figure'' act, and depicts the Autobot leader, rendered in metallic silver, opening the Matrix, referencing the end of "[[The Return of Optimus Prime, Part 2]]". This figure was packed in at a ''confirmed'' ratio of one per every ten cases.

{{-}}{{anchor|SCFMegatrongun}}
[[File:SCF Optimus Act6.jpg|upright=1.66|thumb|Shadow the Convoy, ow the edge.]]
*'''Convoy (C) with Megatron Gun Mode''' (2002)
**''Act'': '''6'''
**''Accessories'': Extra right fist, stand

:The sixth ''Super Collection Figure'' wave featured yet another mass-release version of Optimus. While this Optimus is wielding Megatron (using the same mold as the chase figure from the second Act), he has entirely new-mold arms, plus an interchangeable empty right fist. On top of that he was extensively redecoed: he's actually cast in different shades of light salmon plastic and heavily painted over in an overall darker, less saturated scheme, his normally-white parts now in medium-gray. His pec-windows are painted with a weird shiny dark blue that gives them a translucent look. The figure was available in both full color and pewter versions in an equal ratio.

: In eight out of every ten cases, the pewter version came with the head for the wave's [[Grand Maximus#Super Collection Figure|Grand Maximus]] build-a-figure, packed at a ratio of six color parts to two pewter per case.

{{-}}{{anchor|SCFStarConvoy}}
[[File:SCF Optimus Star Convoy.jpg|upright=1.66|thumb|Chonktimus Prime.]]
*'''Star Convoy''' (2002)
**''Act'': '''8'''
**''Accessories'': Stand

:After taking a break for the seventh wave, Prime returned for the eighth ''Super Collection Figure'' wave, which would prove to be the final Generation 1-themed set of figures. This figure of Prime in his Star Convoy body was available in both full color and pewter versions in an equal ratio.

:In eight out of every ten cases, the colored version came with the right arm for the wave's [[Scorponok (G1)#Super Collection Figure|Scorponok]] build-a-figure; this part could be in either full color or pewter, at a 4:4 ratio.

{{-}}{{anchor|ConvoySet}}
[[File:SCF Optimus Earth Obliteration.jpg|thumb|upright=1.66]]
*'''Special "The Earth Obliteration Plan": Exclusive Convoy Set''' ([[February 3|Feb 3]] 2002)
**''Accessories'': Stand

:Available exclusively at the Wonder Festival convention, this set includes two metallic-paint versions of Convoy figures from Act 2: the "Convoy w/ Megatron Gun" chase figure (minus the jetpack), and the truck-mode "figure".

: The set was limited to only 1000 units.

{{-}}{{anchor|ConfrontationSet}}
[[File:SCF Optimus Confrontation.jpg|thumb|upright=1.66]]
*'''TF Confrontation Set 01: Convoy vs Megatron''' ([[September 20|Sept 20]]-[[September 22|22]], 2002)
**''Accessories:'' Energon-axe

: Exclusive to the Tokyo Game Show 2002, this special set includes a new version of the original first-Act Optimus Prime figure, along with a new version of the first-Act Megatron. Both are cast in transparent plastic and completely painted over in a grimy, battle-damaged look. Both also come with the interchangeable energon-axe and mace weapons from their first-wave chase figures. Completing the theme of the set is the backdrop of the packaging interior, which depicts [[Sherman Dam]].

: Curiously, Optimus features the larger, rounded-off antennae of the [[Hasbro]] ''Heroes of Cybertron'' version of the mold, which was in production/circulation about the same time.

: As with the above Wonder Festival set, this set was also limited to 1000 units.
{{-}}
==Mega Super Collection Figure==
{{anchor|MSCF}}
*'''Convoy TV Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
*'''Convoy Metallic Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
{{-}}

==''Heroes of Cybertron''==
[[File:HOC Optimus.jpg|upright=1.66|thumb|Hey Spike, pull my finger.]]
*'''Optimus Prime''' (2002/2006)

: Part of the first wave of Hasbro's ''[[Heroes of Cybertron (toyline)#Heroes of Cybertron|Heroes of Cybertron]]'' series, Optimus is a [[redeco]] of the standard ''Super Collection Figure'' Optimus mold, with a ''slight'' [[retool]]ing to give him longer, thicker, rounded-off helmet antennae [[for safety reasons]]. Like all the standard ''Heroes'' figures, he is cast in transparent plastic, then painted over, save for the eyes and a small patch on the back of his head, giving him a [[light-piping]] gimmick. There are a few other small deco differences to the ''Heroes'' version, such as his helmet crest changing from white to gray.

: Optimus was re-released in 2006 as part of a short-lived ''Heroes of Cybertron'' revival, celebrating the 2006 DVD release of the original ''[[The Transformers: The Movie]]''. Cast in solid-white plastic rather than translucent blue, this makes him ''very'' similar to the original ''SCF'' toy, but he retained the thicker antennae, plus got some very minor paint changes on the head: his crest-vent went back to white, and oddly his eyes are white too, rather than the ''SCF'' version's chest-window light blue.

::*''[http://www.tfu.info/2002/Autobot/HoCOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime at TFU.info]''

{{-}}{{anchor|HOCApex}}
[[File:HOC Optimus Apex.jpg|upright=1.66|thumb|Don't tell anyone, but this crap is HEAVY!]]
*'''Powermaster Optimus Prime Apex Armor''' (2002)

: An unexpected addition to the line, especially in the first wave next to another Optimus (see above), "Apex Armor" Optimus is a [[redeco]] of [[Ginrai (robot)#Super Collection Figure|God Ginrai]], the double-armored-up form of Optimus's ''[[Fight! Super Robot Lifeform Transformers (franchise)|Super-God Masterforce]]'' lookalike [[Ginrai (robot)|Ginrai]]. There are a few small paint differences between God Ginrai and Apex Armor Prime (beyond the obvious "opaque vs clear-plastic base figure" thing, we mean), most notably that the many parts on God Ginrai that are darker unpainted gray plastic, like the thighs and side-panels/guns on the lower legs, have been painted the same light gray as the chest on Optimus.

: This is the first Hasbro-release depiction of Optimus in this mode, later backed up with the release of the full-fledged toy of [[Optimus Prime (G1)/toys#PMOP|Powermaster Optimus Prime]] with [[Apex Bomber]] the following year.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeApexArmor/optimusprime.htm More information on ''Heroes of Cybertron'' Powermaster Optimus Prime Apex Armor at TFU.info]''

{{-}}{{anchor|HOCaxe}}
[[File:HOC Optimus Axe.jpg|upright=1.66|thumb|Energon Axe: Only used in [[More than Meets the Eye, Part 2|one episode]]. Ever.]]
*'''Optimus Prime''' (2002)

:This second-wave ''Heroes of Cybertron'' release is a variation of the chase figure from the first ''Super Collection Figure'' wave, depicting Prime with his right hand replaced with his energy axe. This figure is a little different from its Japanese progenitor (beyond the "clear-plastic painted over" deal, of course), being painted in normal matte/gloss rather than metallic paint, and replacing the left "pointing" hand with the clenched fist of the later "communicator" version of Optimus. It also retains the ''Heroes'' molding alterations to Optimus's helmet.

: Oddly, he comes with the same collector card as the first version, and the packaging does not call out the energy weapon in any way. The card-back cross-sell even shows only the original Optimus. (The same happened to this wave's energy-weapon-wielding [[Megatron (G1)/merchandise#Heroes of Cybertron|Megatron]].)

::*''[http://www.tfu.info/2002/Autobot/HoCAxeOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Plasma Weapon at TFU.info]''

{{-}}{{anchor|HOCSpark}}
[[File:HOC Optimus Spark Attack.jpg|upright=1.66|thumb|This can't be [[Spark attack|Spark Attack]]! His is so energetic that... he BURNS.]]
*'''Powermaster Optimus Prime Spark Attack''' (2002)

: In a yet another unusual choice for the line, this second-wave figurine is a redeco of the first God Ginrai/Powermaster Prime Apex Armor PVC figure, cast in translucent orange plastic with red gradients and flame detailing, depicting a "spark attack" mode.

: This is a variant of the ''Super Collection Figure'' "God Fire Guts" God Ginrai chase figure, which had been rendered entirely in solid metallic gold paint.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeSparkAttack/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime Spark Attack at TFU.info]''

{{-}}{{anchor|HOCComm}}
[[File:HOC Optimus Comm.jpg|upright=1.66|thumb|You won't believe where I'm calling you from!]]
*''' Optimus Prime with Communicator''' (2003)

:This fifth-wave ''Heroes of Cybertron'' figure is a release of the Prime figure from the fourth ''Super Collection Figure'' wave, depicting a weaponless Prime talking into the communicator in his left arm. He retains the helmet alterations of the previous versions of the figure.

: This toy also came with the head and weapons for the wave's collectible [[Metroplex (G1)#Heroes of Cybertron|Metroplex]] build-a-figure.

::*''[http://www.tfu.info/2003/Autobot/HoCCommunicatorOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Communicator at TFU.info]''

{{-}}

==Hard Hero==
[[File:HardHero OptimusPrime bust.JPG|thumb|upright=0.85]]
*'''Optimus Prime''' (Bust, 2002)

: Optimus Prime was the first ''Transformers'' bust released by [[Hard Hero]]. He is approximately six inches tall at the head (8.5 at the gun) and is made out of cold-cast porcelain. There were also a version of the bust signed by the sculptor, limited to 100 samples.

{{-}}

[[File:HHero OptimusStatue.jpg|thumb|Not there. There!]]
*'''Optimus Prime''' (Full figure statue, 2003)

:Hard Hero also created a 13-inch tall Optimus Prime statue. It is sculpted pointing with his left hand while holding his ion rifle in his right.

{{-}}

==MyClone==
[[File:Prime-Myclone.jpg|upright=1.67|thumb]]
*'''Optimus Prime (2003)'''
**''Japanese ID number:'' '''MFT001''' and '''MFT006'''
**''Accessories:'' Display base
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

: Optimus Prime was released three times in the [[MyClone]] line, all in the first wave of toys. He was released in both robot and truck mode, while a clear Optimus in robot mode was one of two chase figures along with a clear Megatron.
{{-}}

==Generation 1 Figure-Collection==

[[File:Bottlecap prime gun.JPG|thumb]]

*'''Convoy (gun)''' (2003)
**''Japanese ID number:'' '''C-1'''
**''Accessories:'' Display base

:At only one inch in height, this Optimus "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's Transformers [[Generation 1 Figure-Collection]]. The figure was rendered in both a standard "retro" black and white color scheme, and [[:File:Bottlecap chase prime.jpg|a rare full-color]] [[chase figure|chase]] version, and came with a leaflet, personalized with cartoon screen captures.
{{-}}
[[File:Bottlecap prime pointing.JPG|thumb]]
*'''Convoy (pointing)''' (2003)
**''Japanese ID number:'' '''C-2'''
**''Accessories:'' Display base

:The second Prime figure in the Generation 1 collection was much like the first, only sculpted with an empty hand, pointing off into the distance like a lot of Optimus Prime figures are wont to do.
::*''[http://snakas.web.fc2.com/misc_item/kabaya_bottle.htm More information on the Bottlecap Collection at Autobase Aichi]''

{{--}}

==KT Figure Collection==
[[File:Optimus_Prime_KT.jpg|upright=1.66|thumb|Thanks for helping me... [[City of Steel (episode)|pull myself together.]]]]
*'''Convoy''' (KT Figure Collection, 2004)
: This figure was designed by [[Yuki Ohshima]] and produced by [[KT Figure Collection]]. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in ''[[The Transformers: The Movie]]''.

{{-}}{{anchor|KTFCRevival}}
[[File:Optimus_Prime_ex_KT.jpg|upright=1.44|thumb|No, I am [[redeco|NOT]] [[Ultra Magnus (G1)|Ultra Magnus]]! I'm silver, not [[:File:Magnuslongshot.jpg|white]]]]
*'''Convoy "Revival version"''' (''[[Figure Ō]]'' exclusive, 2004)
: The 82nd issue of the hobby magazine ''[[Figure Ō]]'' came with a [[redeco]] version of Optimus Prime's mini bust. It is painted completely silver, making him appear to be coated with the special alloy from "[[The Return of Optimus Prime, Part 2]]".

{{-}}

==Palisades==
[[File:Palisades WarWithinPrime.jpg|thumb]]
*'''The War Within Optimus Prime''' ([[Palisades Toys|Palisades]], 2005)

:'''The War Within'' Optimus Prime is a six-inch-tall polystone mini statue based on his appearance in the popular [[War Within (franchise)|''War Within'' comic book series]]. Prime stands on a silver Autobot-insignia stand, is decorated with dirt to simulate battle damage, and has articulation in his head and arms. The statue was limited to 1500 pieces worldwide.

{{-}}

==''Titanium Series''==
[[File:TitaniumRMWWPrime.jpg|thumb|Descend, Squattimus Prime.]]
*'''War Within Optimus Prime''' (3" Robot Masters, 2006)
**''Accessories:'' Ion Blaster, display stand

: ''War Within'' Optimus Prime is the second toy representation of Optimus Prime as he appears in ''War Within''. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

: He is squat. Very squat.

{{-}}
{{anchor|TitaniumG1}}
[[File:TitaniumRMG1Prime.jpg|thumb|Drop and give me twenty, soldier!]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand

: The first Titanium representation of G1 Optimus Prime has a well-proportioned sculpt based on his 20th Anniversary toy. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

{{-}}
{{anchor|TitaniumG1BattleDamage}}
[[File:TF-Titanium-Series-3-inch-Robot-Masters-Battle-Damaged-Optimus-Prime.jpg|thumb|"Drop dead and give me 20!"]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand
: This is a repaint of the 3" G1 Optimus Prime titanium figurine, with a 'battle-damaged' deco.
{{-}}{{anchor|tit2pack}}
[[File:Titanium-Series-Optimus-Prime-and-Bumblebee-2pack.jpg|thumb|"You! YOU STOLE MY LAST CESIUM SALAMI!"]]
*'''Optimus Prime & Bumblebee''' (2-pack, 2007)
**''Accessories:'' Ion Blaster, display stand
: A Toys 'R' Us [[exclusive]] two-pack, this set features "Supermetal Finish" (read: shiny) versions of the "Robot Master" ''Titaniums'' Optimus Prime and Bumblebee.

{{-}}

==First 4 Figures==
[[File:First 4 Figures Battlefield Optimus vs Megatron.jpg|thumb|upright=1.66]]
*'''Optimus Prime vs Megatron''' (2006)
**''Accessories:'' extra head for Megatron (with detachable helmet), extra hand for Optimus Prime
{{toydesigner|[[Little IroN]] (concept artist), [["Mad" Alterton]] (sculptor), [[Leandro Sivori]] (painter)}}

:The first entry in the ''Transformers Battlefield'' line by model company [[First 4 Figures]], this 13-inch tall diorama depicts Optimus Prime slugging it out with Megatron. Optimus is posed as though doing a shoulder shove while holding his ion blaster, but a provided "REP" (Replaceable Exterior Part) hand allows buyers to instead recontexualise the pose as a spinning backhand slap. Megatron comes with a REP of a battle damaged version of his head, which features a detachable "helmet" to show off his exposed robo-brain.

:The model was limited to 1,850 pieces worldwide, and came with a numbered certificate of authenticity, which allowed buyers to reserve the same number on their next purchase in the series. It also came with an A4 mini-poster depicting the same fight between Optimus and Megatron by artist [[Little IroN]], which was also sold separately as a limited edition A2 poster.

:As a ''Transformers Battlefield'' release, this model featured a detailed base designed to interlock with others in the same range to create a massive battle diorama. Unfortunately, a general discontinuation of First 4 Figures' ''Transformers''-related output put the kibosh on any further ''Battlefield'' models.

{{-}}{{anchor|F4F1}}
[[File:SnakeEyes OptimusPrime statue.jpg|thumb|upright=1.66|Get with the program.]]
*'''Optimus Prime and Snake Eyes''' (<s>2006</s> unreleased)

:Initially announced at UK Toy Fair in 2006<ref>[https://news.tfw2005.com/2006/01/25/first4figures-beast-wars-and-transformers-vs-g-i-joe-statuesbusts-4267 "First4Figures Beast Wars and Transformers VS. G.I. Joe Statues/Busts"] at TFW2005.com</ref> with a second showing at New York [[Toy Fair]] the following month,<ref>[https://tformers.com/transformers-/5568/news.html "Toy Fair 2006 - First4Figures TF & GI Joe Statues& Busts"] at tformers.com</ref> "Optimus Prime and Snake Eyes" was intended to be one of the first releases in First 4 Figures' ''[[G.I. Joe vs. the Transformers]]'' comic tie-in subline. This 8-inch tall bust depicted a one-armed Optimus Prime in the [[Cobra]] [[H.I.S.S. tank|HISS tank]] body he used in that series holding a battle-ready [[Snake-Eyes#First 4 Figures|Snake Eyes]], directly recreating the cover to the [[G.I. Joe vs. the Transformers issue 1|first issue]] of the comic (originally drawn by [[Mike S. Miller]]).

:Unfortunately, this statue was a casualty of F4F's discontinuation of ''Transformers'' product, the result of a challenging marketplace and lack of retailer interest.
{{canceledtoy}}

{{-}}{{anchor|F4F2}}
[[File:StormShadow OptimusPrime statue.jpg|thumb|upright=0.85|Hey, Private Haircut! I might have taken a bit too much off...YOUR HEAD!]]
*'''Optimus Prime vs Storm Shadow''' (2007)
{{toydesigner | [[Siamak Roshani]], [[Joel Chen]] (sculptors)}}
:The third reveal in the ''G.I. Joe vs. the Transformers'' series, this statue is 7.5 inches tall and depicts [[Storm Shadow#First 4 Figures|Storm Shadow]] in a victorious stance on Prime's damaged, disembodied head, based on the cover of [[G.I. Joe vs. the Transformers issue 5|''G.I. Joe vs. the Transformers'' issue 5]] (also by Miller). Storm Shadow is only a mite bigger than your standard 3.75" ''G.I. Joe'' figure, making this statue roughly in scale with the rest of your collection!

:After being revealed at [[San Diego Comic-Con]] in 2006,<ref>[https://tformers.com/ig.php?mode=album&album=6265&dispsize=800&start=0 Tformers.com's SDCC 2006 gallery]</ref> "Optimus Prime vs Storm Shadow" was released in January 2007, holding the dubious honour of being the only one of First 4 Figures' ''G.I. Joe vs. the Transformers'' range to see release. The statue was limited to 250 pieces in the U.S., and 250 pieces in the UK.

::*''[https://www.yojoe.com/archive/statuary/stormshadowprime/ More information on Optimus Prime vs Storm Shadow at YoJoe.com]''

{{-}}

==Diamond Select==
[[File:Optimus Prime Mini-bust.jpg|thumb|"I can't roll out without my legs installed!"]]
*'''Optimus Prime''' (Diamond Select, 2007)
:A mini-bust of Optimus Prime based on his appearance in the comic was released by [[Diamond Select Toys|Diamond Select]] in 2007. The figure includes the upper body of Optimus Prime, carrying his laser rifle and posed as if preparing to charge. The Matrix of Leadership is sculpted into the base of the statue.

{{-}}
[[File:Ark Globe.jpg|thumb]]
*'''Autobot Snow Globe''' (Diamond Select, 2007)

:Optimus Prime is also featured in Diamond Select's Autobot-themed snow globe, posing above a [[Mount St. Hilary]] base which also features the ''[[Ark (G1)|Ark]]'' and [[Omega Supreme (G1)|Omega Supreme]]. The globe was sculpted by [[Art Asylum]].

{{-}}

[[File:DST08 FinalBattlePrimeBust.jpg|thumb|Hold this for a moment won't you.]]
*'''Final Battle Optimus Prime''' (Diamond Select, 2008)
:Final Battle Optimus Prime was exclusive to the online retailer Action Figure Xpress. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and limited to 1000 pieces. Optimus Prime is shown after his climactic battle with Megatron during Transformers: The Movie; shortly before he passed the Matrix of Leadership (which is also removable here) to Ultra Magnus. His base features the life support readout that monitored both his declining health and eventual death.

{{-}}

{{anchor|G1AnimatedOptimusPrimeBust}}
[[File:DST SDCCToonPrimeBust.jpg|thumb]]
*'''G1 Animated Optimus Prime''' (Diamond Select, 2008)
:G1 Animated Optimus Prime was exclusive to the 2008 San Diego Comic Con. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and features a more matte color scheme to better match the cartoon's palette.

{{-}}

[[File:DiamondSelect PowermasterOptimus.jpg|thumb|"It's not great to be back."]]
*'''Powermaster Optimus Prime''' (Diamond Select, 2010)

:This fourth Optimus Prime bust was to be based on his [[Powermaster]] incarnation, but appears to have been canceled.

{{canceledtoy}}

{{-}}
[[File:DiamondSelect OptimusPrime bustbank.jpg|thumb|"Saving Money is the right to all Sentient Beings".]]
*'''Optimus Prime Bust Bank''' (Diamond Select, 2010)

:A 6-inch hollow Optimus Prime bust to keep your spare change safe! It would've featured articulation in its shoulders and neck, but like the Powermaster bust, it never saw release.

{{canceledtoy}}
{{-}}

==''Transformers'' (2007)==
*'''Optimash Prime''' (2007)
{{main|Optimash Prime}}
{{-}}
[[File:Softimus Prime.jpg|thumb|Freedom is the right of all sentient beings... in bed.]]
*'''Softimus Prime''' (2007)

:Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He features Movie-style faction symbols on his right arm and both sides of his cab mode. He is love.

::*''[http://www.tfu.info/2007/Autobot/SoftimusPrime/softimusprime.htm More information on Softimus Prime at TFU.info]''

{{-}}

==''Robot Heroes''==
[[File:RH Optimus vs Ravage.jpg|thumb|upright=1.66|Mini-Me!]]
*'''Optimus Prime & Ravage''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Part of the first wave of ''[[Robot Heroes (toyline)|Robot Heroes]]'' 2-packs (sold under the [[Transformers (2007 toyline)|2007 live-action-movie line]] branding), Optimus Prime is a simple, yet well-detailed two-inch tall figurine with exaggerated, cartoony proportions, with swivel articulation at the neck and shoulders. He is sculpted holding his Ion Blaster rifle in his right fist and his left arm in a pointing pose. He is also love, and demands that you pull his [[More than Meets the Eye, Part 3#Notes|Finger of Doom]].

: He was sold in a two-pack with [[Ravage (G1)/toys#Robot Heroes|Ravage]], positioned in a way that gives an impression of [http://orig12.deviantart.net/b22b/f/2008/216/7/1/optimus_prime_vs_ravage_by_cobaltkitty.jpg him freaking out to Ravage's size].

: This version of Optimus was later also released as part of a set with a 100-piece [[jigsaw puzzle]] with no apparent changes.

{{anchor|RHBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: In some countries outside of North America, Optimus Prime was released individually in a blindpack with no notable changes.

{{-}}{{anchor|RH5pack}}
[[File:Robot Hero Supermetal Optimus Prime.jpg|thumb|upright=0.99|Cuteness is the right of all sentient beings.]]
*'''Decepticon Sneak Attack''' (Multi-pack, 2007)

: "Optimus Prime with Supermetal Finish" is a slightly-shinier [[redeco]] of the previous ''Robot Heroes'' figure; this is the most noticeable with his blue parts, which are now in a much brighter, richer gloss-blue paint rather than the unpainted darker-blue matte plastic of the two-pack version.

: He came in a [[Walmart]] exclusive multipack, alogn with [[Mirage (G1)/toys#RH5pack|Hologram Mirage]], [[Cliffjumper (G1)/toys#Robot Heroes|Cliffjumper]], "Supermetal Finish" [[Megatron (G1)/merchandise#RH5pack|Megatron]], and [[Skywarp (G1)/toys#Robot Heroes|Skywarp]].

{{anchor|RHFinishBlindpack}}
*'''Optimus Prime with Supermetal Finish''' (Single-pack, 2008)

: "Supermetal Finish" Optimus Prime also saw release in a blindpack outside of North America.

{{-}}{{anchor|RHUnicron}}
[[File:RH Prime vs Unicron.jpg|thumb|upright=1.66|'Til all are cute.]]
*'''Optimus Prime & Unicron''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Sold in the third wave of ''Robot Heroes'', this version of Optimus is posed opening the [[Matrix of Leadership]], complete with clear-plastic shine.

: He was packed with a very small [[Unicron/toys#Robot Heroes|Unicron]].

{{anchor|RHMatrixBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: Just like the previous figures, the Matrix-bearing Prime also received a blindpacked release.
{{--}}

==''Attacktix''==

*'''Optimus Prime''' (Starter Set, 2007)
[[File:Attacktix Optimus Prime.jpg|thumb|He shoots sideways. The direction, not [[Sideways (Armada)|the character]].]]
{{attacktix
|ID=TF2-19
|faction=Autobot
|class=Leader
|special=Last Stand - 13/26 (50%) success ratio
|cost=40
|speed=6
|attacktype=Shooter (Force Blast)
}}
{{-}}
:Optimus Prime will shoot you down. He was released as part of the 2007 Starter Set along with ''[[The Transformers (franchise)|Generation 1]]'' [[Megatron (G1)/toys|Megatron]], ''[[Transformers: Energon (franchise)|Energon]]'' [[Landquake (Energon)|Landquake]] and ''[[Transformers: Cybertron (franchise)|Cybertron]]'' [[Skywarp (Armada)|Skywarp]].

:Optimus' Last Stand special allows him to stand up if he's the only figure in your team left in play. If you're down to two men you might even be tempted to shoot your own man just to keep Optimus Prime in play. Don't though. [[Peter Cullen]] wouldn't approve.

:Sadly you can't bring him into play with the ''Cybertron'' [[Optimus Prime (Armada)/toys|Super Optimus Prime]] vehicle mode because he's not ''Super'' Optimus Prime.
{{-}}

==''Revoltech''==
[[File:Revoltech Convoy.jpg|thumb|upright=1.66|Windowbra! ''(2007 Version pictured)'']]
*'''Convoy''' (2007/2014)
**''Series number:'' '''019'''
**''Legacy of Revoltech ID number'': '''LR-008'''
**''Accessories:'' Ion blaster, Autobot Matrix of Leadership, two clenched fists, gun-wielding right hand, pointing right hand, open left hand

:A non-transforming but ''highly'' articulated Optimus Prime action figure, ''[[Revoltech]]'' Convoy uses the ''Revoltech'' "revolver joints" for maximum poseability. Prime comes with his now-standard ion blaster and Matrix of Leadership accessories, as well as a few alternate hands; while one of the hands is specifically designed to grip the ion blaster, he can't really do anything dramatic with the Matrix, and it just sort of sits in his open-palmed left hand. His sculpting is explicitly in the style of [[Pat Lee|Pat "serfdom" Lee]]'s interpretation of Prime, but due to physical constraints has no lack of perspective.

:Unsurprisingly, this mold was redecoed to create ''Revoltech'' [[Ultra Magnus (G1)/merchandise#Revoltech|Ultra Magnus]]. Magnus comes with a new hand mold that can be used to connect him and Prime together in a handshake.

:The initial reveal of the figure (sculpted by Yamaguchi) features swiveling cut joints instead of "revolver joints" (notably the hip parts), with a rather jarring angled joint on the waist (which results in a "sliced" appearance if swiveled).

:Unfortunately, ''Revoltech'' Convoy cannot be distributed to the US due to licensing restrictions, so fans must rely on online hobby shops to import him.

:In 2014, ''Revoltech'' Convoy was reissued as part of the ''Legacy of Revoltech'' line, with an increased price of 3900 yen. This rerelease uses revised Revoltech joints, which come in matte black instead of glossy and have more ratcheting points than previous releases.
{{-}}
===''Amazing Yamaguchi''===
[[File:Tf-Yamaguchi-Revoltech-014-Convoy.jpg|upright=1.66|thumb]]
*'''Convoy''' (2019)
**''Series number:'' 014
**''Accessories:'' Ion Blaster, Energon Axe, 1 pair of splayed hands, 1 pair of trigger hands, left clawed hand, right pointing hand, interlocked hand

:''Amazing Yamaguchi'' Convoy is an all-new take to the Revoltech figure above, but more poseable. Apart from the Ion Blaster, this figure comes with an Energon Axe accessory, and an interlocked hand accessory that is designed to resemble the haymaker that took down Megatron in ''[[The Transformers: The Movie]]''.

:Unlike the first Revoltech figure, Convoy features painted-details-on-colored-plastic rather than fully coating them. The plastic is noted to have a hollow feel compared to the first figure.

:Due to production delays, the release date was rescheduled from September 29 to October 24.
{{-}}

==Sota Toys==
*'''Transformers Chess Set''' (<s>2007</s>)
:An Optimus Prime piece was to be the Autobot-side King on a [[Chess#Sota Toys|chess set]] based on Generation 1, but the set apparently never saw release.
{{canceledtoy}}
{{-}}

==Ornaments==
*'''Optimus Prime''' (2007)
[[File:OptimusPrimeG1Ornament.jpg|thumb|100px|''(American Greetings version pictured)'']]

:Manufactured by [[American Greetings]] as part of their Heirloom ornament collection, this hanging sculpt of Optimus Prime is based upon the 20th Anniversary toy release.
{{-}}

*'''Optimus Prime''' (2014)
[[File:Optimus-prime-keepsake-Hallmark.jpg|thumb|''(Hallmark version pictured)'']]
:Manufactured by [[Hallmark]] as part of their Keepsake ornament collection as part of the Hasbro series which includes ornaments based on [[My Little Pony]] G1, the electronic game Simon, and the board game Sorry, this hanging sculpt of Optimus Prime is based upon the original G1 toy cab in robot mode posed like 1984 box art.
{{-}}

==''Mighty Muggs''==
[[File:MightyMuggs OptimusPrime.jpg|thumb|Optimus lost his ears in the rock tumbler.]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: This [[super deformed]], non-transformable Optimus Prime figure uses the standard [[Mighty Muggs]] body template, with swivel joints in his neck and limbs. He comes with a similarly super-deformed version of his ion rifle.
{{-}}

{{anchor|SDCCmightymugg}}
[[File:MightyMuggs MetallicOptimusPrime.jpg|thumb|Optimus, did you polish your head in the Shine-O Ball-O?]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: An [[exclusive]] to the 2009 [[San Diego Comic-Con]], this Optimus Prime Mugg has a shiny metallic finish.
{{-}}

{{anchor|2018mightymugg}}
[[File:MightyMuggs 2018 Optimus.jpg|thumb|upright=1.44|You ever get so mad you sprout new ears?]]
*'''Optimus Prime''' ([[2018]])
**''ID number:'' '''01'''

: Based on his [[evergreen]] design, this Optimus is part of the 2018 ''Mighty Muggs'' relaunch. As part of the new line, he has a helmet that can be pressed down to change his expression. He features three different faces: [[Mouthplate|classic]], angry, and angrier.
{{-}}

==Transformers Wacky Wobblers==
[[File:WackyWobblers G1OptimusPrime.jpg|thumb|upright=0.85]]
*'''Optimus Prime''' (2009)

: This Optimus Prime {{w|bobblehead}} is part of the popular ''[[Wacky Wobblers]]'' line produced by {{w|Funko}}. Aside from the standard-issue big wobbling head, he features an ion rifle molded onto his right hand and his arms swivel at the shoulders. Optimus is affixed to a base with his name on it.
{{-}}

==USB-Powered Speaker Head==
*'''Optimus Prime USB-Powered Speaker Head'''
[[File:G1-optimusprime-merc-speaker.jpg|thumb]]
: As a 6.5" figure, Optimus Prime's head contains twin {{w|Universal Serial Bus|USB}}-powered speakers. There are two speakers inside each side of his head. The control panel, USB port, and earphone port are located in the back of the head. Under the neck, there is a display to support the head.
: The speaker was redecoed to create Ultra Magnus Speaker.
{{-}}

==Transformers Backpacks==
*'''Optimus Prime''' (2009)

:Made by [[F*A*B Starpoint]], these backpacks are allegedly "engineered for style, safety, comfort... and saving the Universe!" The Generation 1 Optimus Prime design features a stock silhouette of Optimus Prime surrounded by stars, like the [[Paramount Pictures]] logo, while on the lower compartment there is a gigantic Autobot sigil.

==Universal Studios==
*'''Optimus Prime plushie''' (2011)

:Created for the [[Transformers: The Ride – 3D|Transformers ride at Universal Orlando]], a [[super deformed]] plush toy of Optimus was made available at the Supply Vault gift shop near the opening of the ride.

==Tomica==
[[File:TF-Tomica-Wrapping-Trailer.jpg|thumb]]
*'''Transformers Wrapping Trailer''' (2011)
:''[[Tomica]]'' "Transformers Wrapping Trailer" is a die-cast, non-transforming semi tractor-trailer. A redeco of the 2008 "[[wikia:tomica|Tomica Hero: Rescue Force Trailer]]" toy, "Transformers Wrapping Trailer" renders the cab in Generation 1 Optimus Prime colors, while the trailer is decked out with pictures of [[live-action film series]] [[Optimus Prime (Movie)|Optimus Prime]], [[Bumblebee (Movie)|Bumblebee]] and [[Ironhide (Movie)|Ironhide]]. Like all Tomica toys & all [[Go-Bot (G2)#Toys|''Generation 2'' Go-Bots]] and [[Spychanger]]s, Wrapping Trailer features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces.
{{-}}

==Transformers x Mimobot==
[[File:Mimobot OptimusPrime.jpg|thumb|upright=1.66|Why the long face?]]
*'''Optimus Prime Mimobot''' (Mimoco, 2011)
:Produced by [[Mimoco]] as part of their multi-brand line of designer USB "Mimobot" flash drives, this Optimus Prime memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.
{{-}}

==Cuponk==
[[Image:NYCC2011 Cuponk.jpg|thumb|250px|The real contest is whether Prime's medal or Megatron's belt is cooler.]]
*'''Transformers Cuponk''' (2011)
:A New York Comicon exclusive, this set includes two Cuponk cups and 6 ping pong balls. Prime is featured on one cup and one ping pong ball. The same cup also features [[Bumblebee (G1)|Bumblebee]], [[Jazz (G1)|Jazz]], [[Grimlock (G1)|Grimlock]], and [[Hot Rod (G1)|Hot Rod]].
{{-}}

==Titan Warriors==
[[File:Titan-Warrior-Optimus-Prime.jpg|upright=1.11|thumb|Sofubi Hero figures are the right to all young sentient beings.]]
*'''Titan Warrior 5-Pack''' (2013)
:Available at San Diego Comic Con 2013, This Optimus Prime is a 6" PVC Titan Warrior figure (similar to Bandai's ''Ultra/Sentai/Rider Hero, Movie Monster Series'') representing his Generation 1 character. He was packed with [[Grimlock (G1)/toys|Grimlock]], [[Megatron (G1)/toys|Megatron]], [[Starscream (G1)/toys|Starscream]] and [[Soundwave (G1)/toys|Soundwave]].

*'''Optimus Prime''' (Titan Warrior, 2014)
:The Titan Warriors Optimus Prime toy was released individually, under the Beast Hunters Titan Heroes subline.

{{-}}

==''The Loyal Subjects''==
*'''Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Talking}}
*'''Talking Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Larger}}
*'''Talking 5.5" Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Blank}}
*'''8" Blank/DIY Optimus Prime''' (2014)
{{anchor|The Loyal Subjects OG}}
*'''8" OG Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Fiberglass}}
*'''4' Fiberglass Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Hot Topic}}
*'''Talking 5.5" Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Dead}}
*'''8" Dead Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Silver}}
*'''8" Silver Bullethole Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Gold}}
*'''8" Gold Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Black Gloss}}
*'''8" Black Gloss Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Gamestop}}
*'''Talking Optimus Prime''' (2014)
{{charstubtoys}}
{{-}}

==''Mecha Nations''==
[[File:klog tfop 003.jpg|thumb|upright=1.66|Prime, not the shrink wrap!]]
*'''Optimus Prime''' (2014)
**''ID Number:'' '''MN01'''
**''Accessories:'' Ion Blaster, Energon Axe, Removable Armor.

:Created by [[Kids Logic]], this [[super deformed]] G1 Optimus Prime stands 6" tall and is articulated. He features a metallic color scheme, removable armor and replacement hands. He also features LED light up eyes, lights, weapons and [[Matrix of Leadership|Creation Matrix]].

:This figure was also redecoed into Mecha Nations [[Nemesis Prime (G1)#Mecha Nations|Black Convoy]] and [[Ultra Magnus (G1)/merchandise#Mecha Nations|Ultra Magnus]].

{{-}}

==''Ultimetal''==
[[File:Ultimetal-UM01-Optimus-Prime.jpg|upright=1.66|thumb|"Why waste your money so easily Prime?"]]
*'''Optimus Prime''' (2014)
**''ID number:'' '''UM-01'''
**''Accessories:'' Ion blaster, energon-axe, small Matrix, 24 armor pieces, 2 smokestacks, large Matrix, display stand, 8 display stand parts, remote control

: ''Ultimetal'' Optimus Prime is a large non-transforming figure produced by [[Art Storm]], standing at an impressive 1 foot 4 inches/43 cm and made from extensive [[die-cast]] metal. Packaged in four different boxes, he features plenty of articulation and detail, including an opening chest and numerous magnetically attached armor panels that, when removed, reveal Prime's internal anatomy. He also has electronic light-up eyes and roof lights as well as 20 spoken English phrases, all activated via remote control. His [[mouthplate]] even moves when he talks, just like in the cartoon!

: Prime comes with an ion blaster which can also be opened to reveal technical detail, an energon-axe, and two Matrices of Leadership of different sizes. The smaller one fits into his chest, where it can be lit up by an LED, while the larger one lights up on its own and can be held in his hands or placed on display. Prime's display stand has smaller stands for the Matrix and ion blaster and also has light-up parts.

: Optimus Prime was recolored into the inner robot of ''Ultimetal'' [[Ultra Magnus (G1)/merchandise#Ultimetal|Ultra Magnus]].

::*''[http://artstorm.co.jp/ultimetal_optimusprime.html More information on ''Ultimetal'' Optimus Prime at Art Storm's official site]''

*'''Optimus Prime - Battle Damaged''' (2018?)
**''ID number:'' '''UM-01BD'''

{{-}}

==''EX Gōkin''==
[[File:EXGokin Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2014)
**''Accessories:'' Two fists, two open hands, two gripping hands, right pointing hand, ion blaster, energon-axe, display stand

: A 6.6-inch tall non-transforming Optimus Prime action figure was produced by Art Storm as part of their ''EX Gōkin Transformers Series'' line. He comes with his trademark blaster and energon-axe as well a number of extra hands, and his chest opens to reveal a non-removable Matrix.

::*''[http://artstorm.co.jp/exgokin_transformersseries_convoy.html More information on ''EX Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==Hikari==
[[File:HikariLimitedEditionMetallicOptimusPrime.jpg|thumb|upright|150px]]
*'''Metallic Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime with a metallic finish. This figure is a limited edition, and limited to 2,000 pieces.

:This mold was also used to make the other limited edition Optimus Primes seen below.

{{-}}
[[File:HikariLimitedEditionClearGlitterOptimusPrime.jpg|thumb|upright|150px]]
*'''Optimus Prime Clear Glitter''' (2014)

:A non-transforming vinyl Optimus Prime figure. While retaining the classic, original colors, this mold is redone to be clear plastic, with glitter bits put into the figure. This vinyl is a limited edition, and limited to 3,000 pieces.

{{-}}
[[File:HikariLimitedEditionBattleReadyOptimusPrime.jpg|thumb|upright|150px]]
*'''Battle Ready Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The mold is Redon again, this time in a battle-damaged look, while he retains the classic Optimus Prime colors. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionGreySkullOptimusPrime.jpg|thumb|upright|150px|By the power of Grayskull... '''''I HAVE THE POWER!''''']]
*'''Grey Skull Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. This vinyl takes the colors in a different way, which is mostly white with some dark grey areas. The colors to kinda look skeleton-ish. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDistressedOptimusPrime.jpg|thumb|upright|150px]]
*'''Distressed Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The colors take on an [[Optimus Prime (Movie)#''Age of Extinction'' film|Age of Extinction Optimus Prime]], in his flat-nose truck mode. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionFireOptimusPrime.jpg|thumb|upright|150px]]
*'''Fire Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in clear plastic. The colors seem to homage the Generation 1 [[Hot Rod (G1)|Rodimus Prime]].,This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDangerousOptimusPrime.jpg|thumb|upright|150px]]
*'''Dangerous Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, done in a camouflage style. This figure is a limited edition, and limited to only 600 pieces.

{{-}}
[[File:HikariLimitedEdition24KOptimusPrime.jpg|thumb|upright|150px]]
*'''24K Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in gold plastic. This figure is a limited edition, and only limited to 600 pieces.

{{-}}
==''Thrilling 30''==
*'''Optimus Prime''' (Collectible Figurine, 2014)
**''Series / Number:'' '''1 / #1'''
**''Accessories:'' Collector's base
:A super-deformed Optimus Prime was released among the blindpacked [[Thrilling 30#Collectible Figurines|''Thrilling 30'' Collectible Figurines]] by [[Goldie Marketing]]. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

*'''Collectible Figurines''' (5-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 5 Collector's bases
:The same Optimus Prime figurine was also available in a 5-pack alongside [[Megatron (G1)/merchandise#Thrilling 30|Megatron]], [[Ratchet (G1)/toys#Thrilling 30|Ratchet]], [[Starscream (G1)/merchandise#Thrilling 30|Starscream]] and [[Soundwave (G1)/merchandise#Thrilling 30|Soundwave]].

*'''Optimus Prime 3-pack''' (3-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 3 Collector's bases
:The same Optimus Prime figurine was ''also'' available in a 3-pack alongside [[Optimus Prime (WFC)/merchandise#Thrilling 30|''Prime'' Optimus Prime]] and [[Optimus Prime (Movie)/merchandise#Thrilling 30|Movie Optimus Prime]].
{{-}}

==Leg Avenue==
{{anchor|LegAvenue}}
[[File:Leg Avenue Optimus Prime.jpg|right|upright=.75|thumb|]]
:Costume and lingerie manufacturer Leg Avenue released an officially licenced Bumblebee costume along side ones for [[Bumblebee (G1)/merchandise#LegAvenue|Bumblebee]] and [[Megatron (G1)/merchandise#LegAvenue|Megatron]].

{{-}}

==''Tiny Titans''==
*'''Optimus Prime''' (Tiny Titans, 2015)
**''Series'': '''2'''
**''Number'': '''10/12'''

: Part of the third assortment of ''[[Tiny Titans]]'' [[blindpacking|blindpacks]], this version of Optimus Prime is a very small, soft-plastic figure of him in robot mode, brandishing both his rifle and his energy-axe weapon in a running battle pose.

: He includes a collectible card that renders him in the [[Transformers: Robots in Disguise (2015 franchise)|2015 ''Robots in Disguise'']] styling. The card includes a scan-badge for the [[Transformers: Robots in Disguise (mobile game)|''Robots in Disguise'' mobile game]], which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.

{{-}}{{anchor|TinyTitans2}}
[[File:TinyTitans OptimusG1S5.jpg|upright=1.67|thumb]]
*'''Optimus Prime''' (Tiny Titans, 2016)
**''Series'': '''5'''
**''Number'': '''11/12'''

: Part of the fifth assortment of ''Tiny Titans'', this version of Optimus is in a more neutral pose, this time only carrying his rifle.

: As per usual, he includes a collectible card that includes a scan-badge for the ''Robots in Disguise'' mobile game, which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.
{{-}}

==''D-Style''==
[[File:D-Style-OptimusPrime.jpg|thumb|upright=1.66|You got D-touch. You got D-power]]
*'''Convoy''' (2015)
**''ID number:'' '''43'''
**''Accessories:'' Two fists, pointing right hand, Ion blaster, energon-axe, Autobot Matrix of Leadership, Convoy cab with trailer

:An Optimus Prime was produced by [[Kotobukiya]] as part of ''[[D-Style]]'', their franchise-spanning line of super deformed model kits. His accessories include an ion blaster, an energon-axe, a Matrix that can store in his chest, and a tiny super deformed representation of his truck mode which can carry the ion blaster. Moving his antennae causes his mouthplate to move up and down.

:For a small figure it includes a large amount of articulation, including ankle tilts and top of legs tilting away from the yellow codpiece.

: The Convoy Trailer, ion blaster and the gold part of the Matrix all require painting. In addition, on promotional images ''all'' the black details and lines (for example on the front thighs and round the edge of the yellow codpiece) are painted and the eyes have been painted blue instead of left as clear plastic.

: Amusingly, the head has the [http://www.1999.co.jp/itbig29/10294593z.jpg mouth-less face] underneath Optimus' mouthplate, as a either a reference to the error from [[The Search for Alpha Trion]] or limitation in the model kit (or both).

:This mold was also used to make ''D-Style'' [[Nemesis Prime (G1)#D-Style|Black Convoy]].
{{-}}

==''ES Gōkin''==
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe, Matrix, left & right gripping hands, left & right open hands, left & right pointing hands, display stand

:Optimus Prime was also released as part of Art Storm's ''ES Gōkin'' series, a line of posable super deformed figures. He comes with his trademark gun which he can hold in either hand, an energon-axe that plugs into his wrist sockets, and a Matrix he can hold but not store in his chest.

::*''[http://artstorm.co.jp/esgokin_convoy.html More information on ''ES Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==''D-Collection''==
[[File:D-Collection Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe

:[[Kabaya]]'s ''D-Collection'' Optimus Prime is a small super deformed figure that requires some assembly and features articulation limited to his shoulders. He comes with his trademark blaster and axe accessories. Sold blindpacked, Prime is available as both a standard full color figure and a rare clear plastic version. He comes with chewing gum.
{{-}}

==''Metal Earth''==
[[File:Metal Earth Optimus Prime.jpg|thumb]]
*'''Optimus Prime''' (2015)
**''ID number:'' '''MMS300'''
:''[[Metal Earth]]'' Optimus Prime is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".
{{-}}
[[File:Metal Earth Legends Optimus Prime.jpg|thumb|[[Minecraft|Minecraft x Transformers]] before ''Minecraft x Transformers'' was a thing]]
*'''Optimus Prime''' (Legends, 2019)
**''ID number:'' '''MEM055'''
:''Metal Earth Legends'' Optimus Prime is a DIY 3D steel model kit in the shape of a super deformed version of the [[evergreen]] Optimus design. The kit's difficulty rating is given as "moderate".
{{-}}

==Hot Toys==
*'''Optimus Prime (Starscream Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Ion Blaster, two wings, two wing mounts, two null-rays, Matrix of Leadership, Base, Starscream's head (Sideshow Collectable's exclusive)

:Released by [[Hot Toys]] this high end collector figure stands approximately 30 cm tall. It features LED light up eyes and it's chest can open to reveal a LED light up, removable Matrix of Leadership. This version comes with a pair of wings and two [[null-ray]]s from Starscream that Optimus can attach. The Sideshow exclusive version of this comes with Starscream's severed head.

*'''Optimus Prime (Megatron Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Fusion cannon, Ion Blaster, gun with stock, set of wheels, two cannon mounting accessories, shoulder mount, Matrix of Leadership, Base

:This version of the figure has accessories themed from Megatron. These include Megatron's [[fusion cannon]], and a long rifle that passingly resembles Megatron's original gun mode. Both can be combined into a large two handed cannon.

{{-}}

==''Block Wars''==
*'''Optimus Prime''' (2016)
**''Number:'' '''1'''

:Part of [[Kabaya]]'s ''[[Transformers Block Wars]]'' candy toy line, this Optimus Prime kit is surprisingly, based on his [[Optimus Prime (G1)/toys#Cyber Series|Cyber Series Commander toy]]. Molded in red, blue, and yellow plastic with detailing from stickers, he transforms into a truck when finished and is armed with a two-pronged spear. He can also be taken apart and combined with ''Block Wars'' [[Bumblebee (G1)/toys#Block Wars|Bumblebee]], [[Megatron (G1)/merchandise#Block Wars|Megatron]] and [[Starscream (G1)/toys#Block Wars|Starscream]] in various configurations, the ones involving Prime shown on the packaging being:

:*Giving Prime Starscream's wings as a jetpack and arming him with Megatron's cannon.
:*Placing Megatron's turret on Prime's truck mode.
:*Giving Bumblebee Prime's spear, Megatron's arms and Starscream's wings.
:*Attaching Prime and Starscream's legs to Megatron's vehicle mode to create a walking tank.
:*Powering Starscream up by attaching Prime's spear to his back and giving him Bumblebee's weapons.
:*Combining all four into an unnamed combiner, with Optimus Prime forming the torso and upper legs.

==''Transformers Figure Collection''==
[[File:TF-Transformers-Figure-Collection-Optimus-Prime-Decoy.jpg|thumb]]
*'''Convoy''' (01-2016)

:Standing 42mm tall, ''Transformers Figure Collection'' Optimus Prime is a non-poseable soft-rubber figure greatly based on a [[Decoy (G1)|Decoy]] figure.

{{-}}

==''Hero of Steel''==
[[File:HeroofSteel Convoy.jpg|thumb|upright=1.11]]
*'''Convoy''' (2016)
**''Accessories:'' Ion blaster

:Produced by Alpha Max, ''Hero of Steel'' Convoy is a stylized, non-transforming figure standing at 9 inches/23 cm tall. He comes with his ion blaster.

{{-}}

==Bitfig==
[[File:Bitfig-Part-1.jpg|thumb|]]
*'''Convoy''' (12-2016)
Part of the first wave of Transformers Bitfig capsule toys by [[TakaraTomy A.R.T.S]],
Convoy's design is inspired by his appearance in the G1 cartoon, and is articulated at the neck and shoulders.
Bitfig toys were packaged in capsules color coded to the toy they contained.
{{-}}

==Prime 1 Studio==
===''Premium Masterline''===
[[File:TF-Premium-Masterline-PMTF-01-Optimus-Prime.jpg|upright=1.55|thumb|"Just in case you want to say "''I should've looked like this in the movies''", yes, I heard you."]]
*'''Optimus Prime''' (2017)
**''ID Number'': '''PMTF-01''' / '''01EX''' (exclusive)
**''Accessories'': Base, Fusion axe (exclusive), Energy axe (exclusive)

:One of the very first releases of the ''Premium Masterline'' series by [[Prime 1 Studio]], this Optimus Prime is a ''massive'' non-transforming statue based on his Generation 1 appearance with a blend of live-action film aesthetic, and features light-up LED eyes. The statue was also designed by [[Josh Nizzi]] himself. If customers had purchased the statue at [https://www.sideshowtoy.com/collectibles/transformers-optimus-prime-transformers-generation-1-prime-1-studio-9027641/ Sideshow's website], they would receive exclusive Energy and Fusion axes, which can be used to replace Prime's Ion Blaster-holding hand. The standard version was limited to 1500 pieces, while the exclusive version was limited to 750 pieces.

:This statue was later redecoed as [[Nemesis Prime (G1)#Prime 1 Studio|Nemesis Prime]] and [[Ultra Magnus (G1)/merchandise#Prime 1 Studio|Ultra Magnus]]. The statue's model also served as an inspiration to [[Optimus Prime (Movie)|Movie Optimus Prime]]'s appearance in the ''[[Bumblebee (film)|Bumblebee]]'' film.

{{-}}{{anchor|P1SGold}}
[[File:TF-Premium-Masterline-PMTF-01GL-Optimus-Prime-Gold-Edition.jpg|upright=1.55|thumb]]
*'''Optimus Prime Gold Version''' (2018)
**''ID Number'': '''PMTF-01GL'''
**''Accessories'': Base, Fusion axe

:Limited to 500 pieces, Optimus Prime Gold Version is a redeco of the statue above, evoking his Electrum-coated appearance in the Generation 1 episode "[[The Golden Lagoon (episode)|The Golden Lagoon]]". He also comes with a Fusion axe accessory that can replace his Ion Blaster hand.

{{-}}
===''Age of Time''===
[[File:Prime 1 Studio Superior Optimus Prime.jpg|upright=1.55|thumb]]
*'''Superior Optimus Prime''' (<s>201?</s>)

:''Age of Time'' Superior Optimus Prime was designed to be the "ultimate amalgamation" between G1 and movie Optimus Primes. He would have come with two blasters and a huge jetpack, specifically taking cues from Prime's combined form with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]''.

:For reasons unknown, this figure was silently canceled.
{{canceledtoy}}

{{-}}
===''Cutie1''===
[[File:Cutie1 Optimus Prime Figure.jpg|upright=1.11|thumb|''Transformers X Coraline'', directed by [[Travis Knight]].]]
*'''Optimus Prime''' (2022)
**''ID Number'': '''No:055'''
**''Accessories'': Stand

:A striking departure from previous Prime 1 Studio offerings, ''Cutie1'' Optimus Prime is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

:He was later redecoed as ''Cutie1'' [[Nemesis Prime (G1)#Cutie1|Nemesis Prime]].

{{anchor|Cutie1keychain}}
*'''Optimus Prime''' (Keychain, 2021)
**''Accessories'': Stand, chain

:Part of a marketing push following the announcement of the figure above, an acrylic keychain of ''Cutie1'' Prime was released, along with other products such as stickers, T-shirts, hand towels and totebags using the design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.

{{-}}{{anchor|P1SWFC}}

===''War for Cybertron Trilogy''===
[[File:Prime-1-Studio-WFC-Optimus-Prime.jpg|upright=1.66|thumb|"Why... have I... been... canceled?"]]
*'''Optimus Prime''' (<s>2022</s>)
**''ID Number'': '''PMTF-05''' / '''05UT''' (Ultimate Version)
**''Accessories'': Base (standard), base with Shockwave (Ultimate Version)

:A statue based on Optimus Prime's appearance in the ''[[Transformers: War for Cybertron Trilogy (cartoon)|War for Cybertron Trilogy]]'' cartoon. The exclusive version includes a defeated [[Shockwave (G1)/toys#Prime 1 Studio|Shockwave]] as part of the statue's base.

:This item was canceled due to the combination of rising production costs and insufficient preorders.
{{canceledtoy}}
{{-}}

==My Busy Books==
[[File:TF-My-Busy-Books-Transformers-Optimus-Prime-figurine.jpg|upright=1.66|thumb]]
*'''Transformers: My Busy Book''' (2017)

:Included with the [[Transformers: My Busy Book|10-page board book]], 12 figurines, and a playmat, Optimus Prime is represented by a pair of small, PVC non-transforming figurines of his robot and his semi-truck alternate mode, based on his [[evergreen]] design. Like most of the land-based vehicle figurines, his wheels do not roll.

:In terms of quality control, the figurines' paint applications can be... shoddy. If you're a collector who prefers to display them, you should resign yourself from buying it or try to [[customizing|customize]] the figures with better paint applications if you have the skills.
{{-}}

==Rubik's Crew==
[[File:Rubiks Crew Optimus.jpg|upright=1.66|thumb]]
*'''Rubik's Crew Game: Transformers Optimus Prime Edition'''<ref>[https://www.hasbro.com/en-us/product/rubik-s-crew-game-transformers-optimus-prime-edition:70976F4B-5056-9047-F52F-5BB6105031BB Rubik's Crew Game: Transformers Optimus Prime at hasbro.com]</ref> (2017)
This [[super deformed]] version of [[Optimus Prime (G1)|Optimus Prime]]'s robot mode has a detachable "Puzzlehead" that functions like the [https://www.rubiks.com/store/puzzles/rubiks-2x2 2x2] [[Rubik's Cube]].
{{-}}
{{-}}
==Fidget Its==
[[File:TF-Fidget-Its-Optimus-Prime.jpg|upright=1.66|thumb|Before time began, there was...the Cube.]]
*'''Optimus Prime''' (Fidget Its, 2017)

:''Fidget Its'' Optimus Prime is a non-transforming cube-shaped figurine, built for for your fidgeting needs! His pair of eyes & his forehead can be pushed like buttons, his right arm can swivel, his rear section can be fiddled like a combination lock dial, and his left arm can be moved up, down, up, and down.

{{-}}

==Hauck==
[[File:Hauck Go Kart Optimus.jpg|upright=1.66|thumb|Everyone wants to ride Optimus.]]
*'''Optimus Prime Go Kart''' (2017)
:Manufactured by [[Hauck toys]], the Optimus Prime go-kart is a small, pedal-operated vehicle for kids aged 4-8 years old. Cast in the image of Optimus (even featuring his head sculpted on the front), the kart features an adjustable seat as well as a brake.
{{-}}

==Colorcasa==
[[File:Gen-Colorcasa Optimus Prime Spoon Fork.jpg|upright=1|thumb|Eating is the right of... yeah you know the gist.]]
*'''3D Children Tableware''' (2017)
:Chinese company Colorcasa released a pair of children-sized cutlery in the form of a cute (though angry-looking) Optimus Prime, one as a spoon and another as a fork. They were branded as ''Generations'' products.
{{-}}

==Threezero==
===Premium===
*'''Optimus Prime - Classic Edition''' (Premium Scale, 2017)
**''Accessories:'' TBA
{{charstubtoys}}
{{-}}
===DLX===
*'''''War for Cybertron Trilogy'' Optimus Prime''' (DLX Scale, 2021)
**''Accessories:'' Ion Blaster, Energon Axe, Energon Shield, 5 pairs of hands, Action Stand
{{charstubtoys}}
{{-}}

===MDLX===
[[File:Threezero-MDLX-Optimus-Prime.jpg|thumb|upright]]
*'''Optimus Prime''' (2022)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)
:[[Threezero]]'s second figure for the MDLX line, this version of Optimus Prime is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Optimus Prime is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and accessories, namely his ion blaster, energon axe and Matrix of Leadership. He comes with a suite of hands in pairs: closed fists, splayed-out relaxed hands, and three different pairs meant to specifically hold each one of the aforementioned accessories. His chest is magnetically attached and as such can store the Matrix when not in use. Optimus also comes with his backpack piece disassembled in package.

:He was redecoed into [[Nemesis Prime (G1)#Threezero|Nemesis Prime]], [[Ultra Magnus (G1)/toys#Threezero|Ultra Magnus]], as well as his [[Optimus Prime (SG)#MDLX|''Shattered Glass'' self]].

:Optimus is [https://www.threezerohk.com/wp-content/uploads/2023/05/MDLX_Transformers_Starscream_17-768x512.jpg compatible] with [[Starscream (G1)/merchandise#Threezero|Starscream]] by way of the latter's wing assembly and head, in reference to "[[Megatron's Master Plan, Part 1]]".

::*''[https://www.threezerohk.com/product/transformers-mdlx-optimus-prime/ More information on MDLX Optimus Prime at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXNewYear}}
*'''Optimus Prime (Year of the Dragon Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:An all-gold {{W|Chinese New Year}} themed redeco of the above figure, featuring dragon patterns across his chest and left arm. According to the product description from Threezero, the right shoulder features the character for "Year of the Dragon" (龍), while his left shoulder features the fifth character (辰) of "Earthly Branches" in traditional Chinese sequencing (地支). Optimus features all the same accessories and functionality as before.

:This figure was limited to 1398 pieces worldwide, revealed in late 2023 and released in February 2024.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-year-of-the-dragon-edition/ More information on MDLX Optimus Prime (Year of the Dragon Edition) at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXVintage}}
*'''Optimus Prime (Vintage Animation Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:Yet another redeco of Prime, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

:Vintage Animation Edition Prime, [[Megatron (G1)/merchandise#MDLXVintage|Megatron]] and [[Bumblebee (G1)/merchandise#MDLXVintage|Bumblebee]] were revealed in a [https://newsroom.hasbro.com/news-releases/news-release-details/40-years-one-legacy-hasbro-celebrates-transformers-40th press release] from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-vintage-animation-edition/ More information on MDLX Optimus Prime (Vintage Animation Edition) at Threezero]
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXSleep}}
*'''Optimus Prime (Sleep Mode)''' (2025)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:A redeco of Prime in various shades of grey as a callback to his death in [[The Transformers: The Movie]]. All previous accessories and functionality carry over from before.

:This figure was revealed on Threezero's official website on February 2025.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-sleep-mode// More information on MDLX Optimus Prime (Sleep Mode) at Threezero]
{{MDLXOptimusPrimeMold}}

==Kidrobot==
[[File:Kidrobot GIJoe Enamel Pin Series.jpg|thumb|250px]]
===Enamel Pin Series===
*'''Optimus Prime''' ([[November 3]], [[2017]])
:*''Rarity:'' 1 in 20
:Released by [[Kidrobot]] in their Enamel Pin Series, this is a flat, enamel pin badge of Optimus Prime inspired by the art of [[Tom Scioli]]'s ''[[Transformers vs. G.I. Joe]]'', albeit with [[Super deformed|cutesy proportions]]. The pin series was [[Blindpacking|blindboxed]], with some pins being rarer than others.
{{--}}

===Vinyl Mini Series===
[[File:Kidrobot GI Joe Optimus Prime mini.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[November 14]], [[2017]])
:*''Rarity:'' 2 in 24
:*''Accessories'': Sword
:The same character design was reused for the Vinyl Mini Series, with Optimus receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. Optimus featured articulation in each shoulder, and also included his [[Minecraft]] voxel sword as first seen in "[[Everybody Hates Metroplex]]".
{{-}}

{{anchor|kidrobotgid}}
[[File:Kidrobot GI Joe Optimus Prime GID mini.jpg|thumb|upright=1]]
*'''Optimus Prime GID''' ([[November 14]], [[2017]])
:*''Rarity:'' 1 in 48
:*''Accessories'': Sword
:Optimus's Vinyl Mini figure was redecoed into "Optimus Prime GID", sharing many of the same paint applications, but now cast entirely out of glow in the dark plastic, more closely representing his apparition to [[Scarlett]] in "[[Headmasters (issue)|Headmasters]]" or his resurrection in "[[The War Never Ends]]". He was one of the rarer, but not the rarest, of the Vinyl Mini Series. His sword is still included.
{{-}}

===Vinyl Keychain Series===
[[File:Kidrobot GI Joe Optimus Prime keychain.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[December 1]], [[2017]])
:*''Rarity:'' 3 in 24
:Optimus was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation. His sword is also absent.
{{-}}

==Bouncing Ball Heads==
[[File:BouncingBallHead OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2017)
:"Bouncing Ball Head" Optimus Prime is a small, super deformed figurine with a removable head that doubles as a bouncy ball. An Autobot logo is tampographed on the back of his head and his name is written under his feet.

:He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique red color.

:Despite clearly representing Generation 1 characters, the collection is advertised as a 2015 ''[[Transformers: Robots in Disguise (2015 franchise)|Robots in Disguise]]'' product.
{{-}}

==Imaginarium Art==
[[File:ImaginariumOptimusPrime.jpg|upright=1.66|thumb|Brings new meaning to "no matter the cost."]]
*'''Optimus Prime''' (2017)

:[[Imaginarium Art]]'s first statue of Optimus Prime stands 24 inches tall and features multiple [[Light-emitting diode|LED]]s, two varieties of his laser rifle, and his energy axe. The statue's chestplate can open, revealing the Matrix of Leadership.

:The sculpted base for this figure also features the Combat Deck and Roller. Only 500 of this item were produced.
{{-}}

*'''Optimus Prime''' (2018)

:The "Legacy of Cybertron" statue is 12 inches tall, and its base can be connected to other statues in that series to produce a larger battle scene. 600 were produced.
{{-}}

==''Keshi Surprise''==
*'''Autobots''' (2018)

:The ''[[Keshi Surprise]]'' series by [[Super7]] consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980s [[Decoy (G1)|Decoy]]s. These [[blindpacking|blind-packed]] figures were sold individually or in cases depicting only their faction. Optimus Prime was available in red, yellow, blue, and purple, and included a foil trading card / sticker.
{{-}}
==Forever Clever==
{{anchor|Jumbochalk}}
*'''4 Pack Jumbo Chalk Set''' (2018)
:Released by [[Forever Clever]], the 4 Pack Jumbo Chalk Set includes a chalk holder featuring Optimus Prime. He's bundled with chalk holders of [[Megatron (G1)/merchandise#Jumbochalk|Megatron]], [[Bumblebee (G1)/merchandise#Jumbochalk|Bumblebee]] and [[Soundwave (G1)/merchandise#Jumbochalk|Soundwave]], and 4 pieces of appropriately colored chalk.
{{anchor|shapechalk}}
*'''5 Pack Shaped Chalk''' (2019)
:A piece of blue chalk formed into the shape of Optimus Prime. Bundled with [[Megatron (G1)/merchandise#shapechalk|Megatron]], [[Bumblebee (G1)/merchandise#shapechalk|Bumblebee]], [[Starscream (G1)/merchandise#shapechalk|Starscream]] and [[Windblade (G1)#shapechalk|Windblade]].
{{anchor|WallWalker}}
*'''Wall Walkers Optimus Prime''' (2018)
:Exclusively released in [[Blindpacking|blind bags]], ''Wall Walkers'' Optimus Prime has suction cups on its hands and feet so it can stick to walls. All its details are printed on, and besides its colors and printing, it is identical to the other Wall Walkers toys.
{{anchor|MiniWalker}}
[[File:MysteryMiniWalkers.jpg|upright=1|thumb]]
*'''Mystery Mini Walkers Optimus Prime''' (2021)
:Also a blind bag exclusive, ''Mystery Mini Walkers'' Optimus Prime is an eraser-like figure with movable arms and legs and printed-on details.
{{-}}
{{anchor|PBRoptimus}}
[[File:TF Authentics 2023 Pull-Back Racers Optimus Prime.jpg|upright=1|thumb|Up top!]]
*'''Pull-Back Racers Optimus Prime''' ([[2023]])
:This toy is a non-transforming rendition of Optimus Prime in a super-deformed rendition of his vehicle mode, albeit with his robot mode head and left arm sticking out of it. As the title suggests, this toy has a pull-back motor that will propel the toy forwards after being pulled back considerably enough.
{{-}}
{{anchor|ClipCharms}}
[[File:ForeverCleverClipCharms.jpg|upright=1|thumb]]
*'''Clip Charms Optimus Prime''' (2024)
:Released in blind bags, ''Clip Charms'' features a keychain of Optimus Prime's face with his name written beside it.
{{-}}
{{anchor|KeyBlasters}}
*'''Key Blasters''' (2024)
:A toy car released as part of the ''Key Blasters'' series prominently features Optimus Prime on its side and hood, with his name written on top in [[Alphabet#Autobot_script|Ancient Autobot]] script. A key is included. When it is inserted into the car, pushing the button on the key will propel the car forward. It was sold in a two-pack with a [[Starscream (G1)/merchandise#KeyBlasters|Starscream]] themed car.

===Squeezelings===
*'''Optimus Prime''' (Series 1, 2022)
:''[[Squeezelings]]'' Optimus Prime is a [[super deformed]], non-posable figure made of soft plastic and holding his ion blaster, released by [[Forever Clever]]. He was released in [[blindpacking|blind bags]] and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

{{-}}{{anchor|SqueezelingsBlackout}}
*'''Blackout Color Mode Optimus Prime''' (2022)
:A [[black redeco]] of the previous Optimus Prime figure. It was exclusive to an 8-figure gift set, featuring [[Optimus Prime (G1)/merchandise#Squeezelings|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings|Bumblebee]], [[Starscream (G1)/merchandise#Squeezelings|Starscream]], [[Megatron (G1)/merchandise#Squeezelings|Megatron]], and Blackout Color Mode versions of the three other characters.

{{-}}{{anchor|Squeezelings2}}
*'''Optimus Prime''' (Series 2, 2023)

:A figure of Optimus Prime in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongside [[Bumblebee (G1)/merchandise#Squeezelings2|Bumblebee]], [[Megatron (G1)/merchandise#Squeezelings2|Megatron]] and [[Optimus Primal (BW)/toys#Squeezelings|Optimus Primal]], in blind bags, or on blister card individually. It was later rereleased as part of the Squeezelings Sidekicks line, bundled with a comic book.

==''Transformers Trading Card Game''==
[[File:W1SOptimusPrimeAL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Autobot Leader''' (2018)
**'''Wave 1S: Starter Set'''
**''Rarity: '''''RT'''
**''Card Number: '''''T03/T04'''
**''Stars: ''7
:Optimus Prime, Autobot Leader is one of four double-sided character cards available in the ''[[Transformers Trading Card Game]]'' Starter Set.

:The artwork for the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile card game.
{{-}}
[[File:W1OptimusPrimeBL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2018)
**'''Wave 1'''
**''Rarity: '''''RT'''
**''Card Number: '''''T29/T40'''
**''Stars: ''13
:Optimus Prime, Battlefield Legend is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The card's Bot Mode line-art was done by [[Guido Guidi]], and Alt Mode line-art by [[Marcelo Matere]] and Alt Mode colors by [[Sara Pitre-Durocher]].

{{-}}
[[File:W1OptimusPrimeFF.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Freedom Fighter''' (2018)
**'''Wave 1'''
**''Rarity: '''''CT'''
**''Card Number: '''''T30/T40'''
**''Stars: ''12
:Optimus Prime, Freedom Fighter is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The Alt Mode artwork on the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile game, while the Bot-mode features line-art by [[Marcelo Matere]] and colors by [[Sara Pitre-Durocher]].
{{-}}
[[File:W2OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Gleaming Commander''' (2019)
**'''Wave 2: Rise of the Combiners'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''11

:Optimus Prime, Gleaming Commander was released as part of the ''[[Transformers Trading Card Game]]'' Wave 2: Rise of the Combiners. Like all other members of [[combiner]] teams released in the set, This version of Optimus Prime is a folding card, with the Bot and Alt modes being depicted when the card is folded in half, and a holofoil portion of the the combined mode depicted when unfolded. The reverse of Optimus Prime, Gleaming Commander depicts the center right portion of [[Optimus Maximus (G1)|Optimus Maximus']], of whom Optimus Prime forms the torso and head.

:The artwork for Bot Mode is reused from the [[Combiner Wars (franchise)|Combiner Wars]] Battle Core Optimus Prime toy's packaging art.

:Optimus Prime, Gleaming Commander can be used to form Optimus Maximus, Ultimate Defender with the use of the Action card [[Enigma of Combination|Sentinel Enigma]] while he and the other Wave 2 Sentinels are in Bot mode on the battlefield and/or KO area.
{{-}}
[[File:W3GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Infantry-Leader''' (2019)
**'''Wave 3: War for Cybertron: Siege I'''
**''Rarity: '''''RT'''
**''Card Number: '''''T07/T48'''
**''Stars: ''11
:General Optimus Prime, Infantry-Leader is one of forty-eight double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege I.

:The card's artwork is based on the ''[[War for Cybertron: Siege|Siege]]'' Voyager-class Optimus Prime toy, with the Bot Mode artwork being reused from the toy's packaging art.
{{-}}
[[File:W4GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Galactic Commander''' (2019)
**'''Wave 4: War for Cybertron: Siege II'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T06/T52'''
**''Stars: ''15

:General Optimus Prime, Galactic Commander is one of fifty-two double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege II.

:The card's artwork is based on the ''Siege'' Leader-class Galaxy Upgrade Optimus Prime toy, which in turn is based on the ''[[Transformers: Cybertron (franchise)|Cybertron]]'' version of Optimus Prime. The Bot Mode artwork is reused from said toy's packaging art, while Alt Mode received new art (lines by [[Marcelo Matere]] and colors by [[Volta]]).
{{-}}
[[File:EEOptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2019)
**'''Wave 1: Energon Edition'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T205/T06'''
**''Stars: ''13

:Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Optimus Prime, Battlefield Legend. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art by [[Marcelo Matere]]
{{-}}
[[File:W5OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Legendary Warrior''' (2020)
**'''Wave 5: Titan Masters Attack'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''12

:Optimus Prime, Legendary Warrior is one of forty-six double sided character cards released as part of Wave 5 of the ''[[Transformers Trading Card Game]]'', Titans Masters Attack. As a character with a body mode, Optimus Prime begins the game with a Titan Master attached in head mode. Once Optimus Prime is KO'd, said Titan Master is deployed.

:The card's artwork is based on the ''Titans Return'' Leader-class Powermaster Optimus Prime toy, with the body mode artwork being reused from the toy's packaging art.

:This card's set was originally set for an April 2020 release, however due to the global COVID-19 pandemic the release was pushed back to May 29, 2020.
{{-}}

==''Magic: The Gathering''==
[[File:MTG-Optimus-Inspiring-Leader.jpg|thumb|upright=1.66|Go ahead, turn me to my other face, see the rules nightmare that happens.]]
*'''Optimus Prime, Inspiring Leader''' (2018)
**''ID number:'' '''002/004'''
**''Set code:'' '''H18'''
**''Color identity:'' '''Red/White'''
**''Casting cost:'' '''{3}{R}{W}'''
**''Artist:'' [[Steve Argyle]]
:Part of the ''[[mtg:Heroes of the Realm|Heroes of the Realm]]'' series of commemorative cards, made by Wizards of the Coast for their employees as rewards for work on specific projects,<ref>[https://www.youtube.com/watch?v=4WNBRWoHq9E Gavin Verhey from Wizards of the Coast explains Heroes of the Realm]</ref> the 2018 "Optimus Prime, Inspiring Leader" card was given to the team behind the ''[[Transformers Trading Card Game]]''. Uniquely, Optimus Prime is "triple-faced" card: a ''Magic'' card on the front side, a ''Transformers Trading Card Game'' card representing Optimus in his alternate mode on the opposite side, and an oversized ''Transformers Trading Card Game'' card representing Optimus in robot mode found by unfolding the card.
:Optimus has the ability to change any permanent (card on the battlefield) to its other face, though sadly that doesn't mean he could convert ''himself'' into a ''Transformers Trading Card Game'' card during a ''Magic: The Gathering'' game.<ref>[https://www.reddit.com/r/magicTCG/comments/e5ovx5/heroes_of_the_realm_promo_optimus_prime_inspiring/ Post by u/Wizards_Drew] on [https://www.reddit.com/r/magicTCG/ r/magicTCG] on Reddit</ref>
:As with all ''Heroes of the Realm'' cards, "Optimus Prime, Inspiring Leader" is not legal to play in any format beyond a specific Commander rule; the cards are novelties designed to be read, rather than played.<ref>[https://markrosewater.tumblr.com/post/189543247703/hi-mark-i-have-2-questions-1-what-are-the Mark Rosewater on Tumblr]: "There’s no plans to release the Heroes of the Realm. The cards aren’t designed to be played. They’re designed to be read."</ref>
{{-}}
{{anchor|MTGHero}}
[[File:MTG-Optimus-Prime.jpg|thumb|upright=1.66|Transform and tap out!]]
*'''Optimus Prime, Hero / Optimus Prime, Autobot Leader''' (2022)
**''ID number:'' '''013/015'''
**''Set code:'' '''BOT'''
**''Color identity:'' '''Blue/Red/White'''
**''Casting cost:'' '''{3}{U}{R}{W}''' (front), '''{2}{R}{W}{B}''' (back with "More Than Meets the Eye")

:"Optimus Prime, Hero" is part of the 2022 ''[[Magic: The Gathering]]'' ''[[mtg:Universes Beyond|Universes Beyond]]'' ''[[mtg:Transformers|Transformers]]'' card set, found in Set Booster and Collector Booster packs of ''Magic''<nowiki>'s</nowiki> ''[[mtg:The Brothers' War|The Brothers' War]]'' set. It can be reversed to become "Optimus Prime, Autobot Leader", representing Optimus in vehicle mode. True to his character, he supports his allies with the "Bolster" mechanic and can return to the battlefield should he [[The many deaths of Optimus Prime|die]] in his Artifact Creature form.
:A variant of this card was available solely in Collector Booster packs, depicting [[Optimus Prime (SG)#Magic: The Gathering|''Shattered Glass'' Optimus Prime]].
{{-}}
{{anchor|MTGSLD}}
[[File:MTG-SLD-Optimus.jpg|thumb|upright=1.66|[[w:Golem|On sale just in time for Hanukkah]].]]
*'''Optimus Prime''' ''(Darksteel Colossus)'' (2022)
**''ID number:'' '''1081'''
**''Set code:'' '''SLD'''
**''Color identity:'' '''Colorless'''
**''Casting cost:'' '''{11}'''

:"Optimus Prime" is part of the ''[[Magic: The Gathering]]'' card pack ''Transformers: Optimus Prime vs. Megatron'', part of the ''[[mtg:Secret Lair|Secret Lair Drop Series]]'' ''[[mtg:Secret Lair Drop Series: December Superdrop 2022|December Superdrop 2022]]'' set. It was available exclusively from [https://secretlair.wizards.com secretlair.wizards.com] from [[December 5]], [[2022]] through [[January 6]], [[2023]].
:Optimus Prime is a [[mtg:Skinned card|reskin]] of the existing ''Magic'' card [https://scryfall.com/card/dst/109/darksteel-colossus Darksteel Colossus], using the same rules and counting as it for all gameplay purposes. Befitting the mighty leader of the Autobots, Optimus is incredibly powerful and impossible to destroy normally, but consequently has a very high casting cost. While the card has printing on both faces, depicting Optimus in robot mode and vehicle mode respectively, both have the same printed abilities and count as a single card for rules purposes—just choose which side you want to display when he enters the battlefield.
: The ''Optimus Prime vs. Megatron'' set also includes [[Megatron (G1)/merchandise#MTGSLD|Megatron]], [[AllSpark#Magic: The Gathering|The AllSpark]], and the bonus card [[Cybertron (planet)|Cybertron]].

{{--}}

==Flame Toys==

===Kuro Kara Kuri===
[[File:FlameToys-KuroKaraKuri-04-OptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (December 2019)
**''Number:'' '''04'''
**''Accessories:'' Large sword, stone, Swords (2), Large axe, Small axe (2), Ion cannon, pairs of hands (5), additional faces (2), Big Turbo Jet Axe with set of hands (exclusive),
**''Sculptor'': Chemical Attack
**''Painting'': Decomas Lab (Hiroyuki Hirose]

:Part of [[Flame Toys]]' ''Kuro Kara Kuri'' line of high-end, non-transforming action figures, Optimus Prime is an original design, though one that bears many similarities to the Don Figueroa design from [[IDW Publishing|IDW's]] ''The Transformers'' vol. 1. He has lots of die cast and LEDs in his head, chest matrix chamber, and both knees. He comes with a multitude of accessories, including a very large sword that can be plugged into a stone, two smaller swords resembling handheld versions of those used by the [[Optimus Prime (Movie)|live-action movie Optimus Prime]], a pair of hatchets resembling those of [[Optimus Prime (Animated)|''Animated'' Optimus Prime]], and of course G1 Optimus Prime's iconic Ion cannon. He also comes with an Orion Pax visorless alternative face, a battle damaged addition face, and five alternative pairs of hands in different poses.
:If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a very large Turbo Jet Axe.
:The reissue (which is labelled as such on the box) uses a slightly different red paint and is the recommended release for use with the Jet Power Armor (see below) due to the paint's extra durability.

{{-}}{{anchor|FlameToysBlackJetPower}}
[[File:FlameToys-KuroKaraKuri-OptimusPrimeJetPowerArmor.jpg|upright=1.66|thumb|And you thought the previous figure was expensive...]]

*'''Optimus Prime Jet Power Armor''' (January [[2024]])
**''Number:'' '''13'''
**''Accessories:'' ''everything...'', Blaster Cannon (exclusive)
**''Sculptor'': Chemical Attack
**''Coloring'': Masashi Watanabe

:Optimus Prime Jet Power Armor is a collection of 23 armour pieces that combine with the previously released ''Kuro Kara Kuri'' Optimus Prime similar to how he combined with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]'' which doubles the size of the figure. If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a blaster cannon.
:As mentioned above, due to addition paint durability, it is recommended to use the re-release of Optimus Prime.

{{-}}

===Furai Model===
[[File:FlameToys-FuraiModel-01-OptimusPrimeAttackMode.jpg|upright=1.66|thumb|'''''X-treme!''''']]
*'''Optimus Prime (Attack Mode)''' (September 2018)
**''Number:'' '''01'''
**''Accessories:'' Ion cannon, axe, 4 hands
{{toydesigner|[[Akira Amemiya]] (concept artist)}}

:Released as part of the ''Furai Model'' line by [[Flame Toys]], "Optimus Prime (Attack Mode)" is an articulated, non-transforming, Voyager Class-sized {{w|Gunpla}}-style model kit. Using parts made of hard ABS plastic and some polycaps, Optimus Prime (Attack Mode) is an original design created by Flame Toys in collaboration with [[Akira Amemiya]] of [[Studio Trigger]].

:For straight-assembly builders, Optimus Prime features a sheet of foil stickers for detail (notably the shoulder insignias), though the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers like ''Gundam Markers'' can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.

:This model kit was later [[redeco]]ed as [[Nemesis Prime (G1)#Flame Toys|Nemesis Prime (Attack Mode)]] and [[Optimus Prime (SG)#Flame Toys|Shattered Glass Optimus Prime (Attack Mode)]].

{{-}}{{anchor|Furai03}}
[[File:FlameToys-FuraiModel-03-OptimusPrimeIDW.jpg|upright=1.66|thumb]]
*'''Optimus Prime (IDW ver.)''' (March 2019)
**''Number:'' '''03'''
**''Accessories:'' Ion cannon, 4 hands
:Optimus Prime (IDW) is a plastic model kit based off of the Optimus Prime design created by [[Don Figueroa]] for [[IDW Publishing]]'s [[The Transformers (IDW)|2009-2011 ''The Transformers'' comic series]]. Similarly to the previous model kit, IDW Optimus is also Voyager-sized.
:This model kit was later redecoed as [[Nemesis Prime (G1)#Furai08|Nemesis Prime (IDW ver.)]] and [[Ultra Magnus (G1)/merchandise#Flame Toys|Ultra Magnus (IDW ver.)]], and it's also used to make the pre-built Furai Action figure (see below.)

{{-}}{{anchor|Furai12}}
[[File:FuraiG1Optimus.jpg|upright=1.66|thumb]]
*'''Optimus Prime (G1 ver.)''' (April 2020)
**''Number:'' '''12'''
**''Accessories:'' Ion cannon, 10 hands, axe
:Optimus Prime (G1) is another plastic model kit, this time a heavily stylized rendition of his cartoon appearance. Like the previous releases, he stands at an approximate Voyager height. He features opening chest windows which reveal sculpted detail of the [[Matrix of Leadership]].

{{-}}{{anchor|Furai16}}
*'''Optimus Prime IDW (Clear ver.)''' (August 2020)
**''Number:'' '''16'''
{{toystub}}

{{-}}
*'''Optimus Prime''' (20??)
:Part of the ''"Deformer Model Kit"'' subline of the ''Furai Model'' line, this Optimus Prime model is a cutesy, "[[super deformed]]" take on the Autobot leader.
{{comingsoontoy}}

===Furai Action===
[[File:FlameToys-FuraiAction-OptimusPrimeIDW.jpg|thumb|Just like one of those second-hand pre-built Gunplas you've seen in Akibahara!]]
*'''Optimus Prime (IDW ver.)''' (January 2020)
**''Accessories'': Ion cannon, 4 hands

:''Furai Action'' Optimus Prime is a pre-assembled redeco of the second ''Furai Model'' kit, with the weathering effects painted on.

{{-}}

==''Playskool Friends''==
[[File:Playskool-Friends-TF-Optimus-Prime.jpg|upright=1.88|thumb|A mouth on his mouthplate? That's a new one.]]
*'''Transformers Collector Pack''' (Canceled)

:Intended to be released as part of the 7-pack for the Playskool Friends lineup, this Optimus Prime is a very adorable non-transforming figurine. He was to come packed with Bumblebee, Arcee, and 4 Rescue Bots: Heatwave, Chase, Boulder and Blades.

:Given the inclusion of the four Rescue Bots, it was ''probably'' unclear if this Optimus Prime is meant to represent his ''Generation 1'' counterpart or his ''[[Optimus Prime (WFC)|Aligned]]'' counterpart.

{{canceledtoy}}

{{-}}

==''Uglydolls''==
[[File:Uglydolls plush collab.jpg|250px|thumb]]
*'''Ox as Optimus Prime''' (2018)
:A collaboration with ''[[Uglydolls]]'' for the 2018 San Diego Comic-Con, the character Ox is dressed as Optimus Prime. He is a limited run exclusive plush, along with Ice-Bat as [[Bumblebee (G1)/merchandise|Bumblebee]].
{{--}}

==McDonald's==
[[File:2018-McD-Authentics-Bumblebee-Optimus-Prime.jpg|250px|thumb]]
*'''Optimus Prime with a sword'''{{sic}} (Happy Meal Toy, 2018)
:Released as part of the [[McDonald's]] June 2018 Happy Meal Toys along with [[My Little Pony]], this Optimus Prime is a super-deformed figurine, and he features a gimmick on his left arm, which can be swung down to reveal a pop-out sword with the press of a button on his back. The sword can be retracted manually by raising the arm.

:The toy was available in South Korea, Italy, Russia, and Malaysia. This toy was rereleased in the US as [[Optimus Prime (Movie)/merchandise#McDonald's 2|Optimus Prime]] for the ''[[Bumblebee (franchise)|Bumblebee]]'' promotion. In Malaysia, this toy is one of the few items that can be found in several hobby toy shops.

{{-}}

==Jada Toys==
===''Metals Die Cast / Hollywood Rides''===
[[File:JadaHollywoodRidesG1OptimusPrime1-24.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2018)
:Released by [[Jada Toys]], this 1/24 scaled non-transforming die-cast truck with rubber tires is based on Optimus Prime's original form and features opening doors to reveal a highly detailed interior with a chromed steering wheel. Similar to the ''[[Robot Powered Machines#Mini-Vehicles|Robot Powered Machines]]'', the truck features a sculpted robot mode underneath. His smokestacks are ''insanely'' long.

:This mold was later redecoed as [[Nemesis Prime (G1)#Jada Toys|Nemesis Prime]].

{{-}}{{anchor|Jada1-32}}
[[File:JadaHollywoodRidesG1OptimusPrime1-32.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2018)
:A medium-sized replica of Optimus Prime much similar to the version above, but with shortened smokestacks. Unlike most other 1/32 vehicles, Optimus does not feature any opening doors, but still retains the sculpted robot mode on his chassis.

{{-}}{{anchor|JadaOP3pack}}
[[File:Jada 1-32 Optimus Prime 3pk.jpg|upright=1.44|thumb]]
*'''Western Star 5700XE Optimus Prime / Optimus Prime / Autobot Optimus Prime''' (Scale 1/32 Die Cast Vehicle 3‑pack, 2022)
:The 1/32 version of Generation 1 Optimus Prime was rereleased in a 3-pack alongside his [[Optimus Prime (Movie)/merchandise#JadaOP3pack|2007 and ''The Last Knight'']] counterparts, neither featuring any notable changes.

{{-}}{{anchor|JadaGhost124}}
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2024)
:A redeco of the 1/24 scaled replica above, this Optimus Prime was released in a crossover with the ''[[Ghostbusters]]'' franchise and is mostly based on the [[Optimus Prime (G1)/Generations toys#Collaborative|MP-10G Optimus Prime Ecto-35 Edition]] figure from the ''[[Transformers Collaborative|Collaborative]]'' toyline, itself based on the original [[Ecto-1]] color scheme, with the addition of some green ghost splatter between the front bumper and the left wheel. Instead of Autobot insignias, this version features the Ghostbusters logo on both sides and the back of the cab, as well as under the chassis right above his robot mode sculpture.

{{-}}{{anchor|JadaGhost132}}
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2024)
:This version of Optimus Prime is a redeco of the 1/32 scaled replica in the same Ghostbusters-inspired deco of the 1/24 version above. The only noticeable difference in colors is the lack of green on its headlights.

===''Metalfigs''===
[[File:JadaMetalfigsG1OptimusPrime.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (4" Die Cast Figure, 2020)
**''Accessories'': Ion blaster, Energon-axe
:''Metalfigs'' Optimus Prime is a 4-inch tall non-transforming super deformed die-cast figure with three points of articulation and light-up eyes.

:He comes with his signature ion blaster and Energon-axe weapons as accessories.

{{-}}{{anchor|DioramaScene}}
[[File:JadaMetalfigsG1DioramaScene.jpg|upright=1.44|thumb]]
*'''Diorama Scene''' (2 3/4" Die Cast Figure 4-pack, 2020)
**''Accessories'': Display backdrop
:A static die-cast figurine of Optimus Prime measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongside [[Bumblebee (G1)/merchandise#DioramaScene|Bumblebee]], [[Starscream (G1)/merchandise#Jada Toys|Starscream]] and [[Megatron (G1)/merchandise#Jada Toys|Megatron]].

:The packaging backdrop can be used as an additional display piece for the set.

{{-}}{{anchor|Metalfigs4pack}}
*'''Optimus Prime / Bumblebee / Optimus Primal / Megatron''' (2 3/4" Die Cast Figure 4-pack, 2022)
:This static Optimus Prime figurine is directly designed after the 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongside [[Bumblebee (G1)/merchandise#Metalfigs4pack|Bumblebee]], [[Optimus Primal (BW)/toys#Metalfigs|Optimus Primal]] and [[Megatron (G1)/merchandise#Metalfigs4pack|Megatron]].

{{-}}{{anchor|Metalfigssingle}}
*'''Optimus Prime''' (2 3/4" Die Cast Figure, 2023)
:The same super deformed Optimus Prime from the 4-pack above is also available in individual packaging.
{{-}}

===''Nano Hollywood Rides''===
[[File:JadaNanoHollywoodRidesG13pack.jpg|upright=1.44|thumb]]
*'''Starscream / Volkswagen Beetle Bumblebee / Optimus Prime''' (1.65" Die Cast Vehicle 3-pack, 2020)
:''Nano Hollywood Rides'' Optimus Prime is a small non-transforming die-cast truck measuring approximately 1.65 inches long. He was released in a 3-pack alongside [[Starscream (G1)/merchandise#Nano Hollywood Rides|Starscream]] and [[Bumblebee (G1)/merchandise#Nano Hollywood Rides|Bumblebee]]. Unfortunately, he doesn't feature a sculpted robot mode underneath like most other Jada vehicles do.
{{-}}

===''Nano Metalfigs''===
[[File:JadaNanoMetalfigsG1-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 1 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:''Nano Metalfigs'' Series 1 Optimus Prime is an incredibly small die-cast figurine molded holding his blaster. He has a little base attached to his feet for balancing reasons.

:He comes in an impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]]. This mold was later redecoed as [[Nemesis Prime (G1)#Nano Metalfigs|Nemesis Prime]] in the Series 2 18-pack.

{{-}}{{anchor|NanoMetalfigs2}}
[[File:JadaNanoMetalfigsSeries2G1BW-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 2 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:A second ''Nano Metalfigs'' Optimus Prime was released in Series 2, now wielding his Energon axe instead of his blaster and doing a bit more of an action pose.

:He comes in ''another'' impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{-}}{{anchor|NanoMetalfigs3}}
*'''Transformers Series 3 18-pack''' (4 cm Die Cast Figure Multipack, 2023)
:For the [[Jada Toys#Nano Metalfigs|third ''Nano Metalfigs'' multipack]], two Optimus Primes were made available at once. One is a re-release of the axe-wielding Series 2 figurine with no noticeable changes, and the other is a golden redeco of the blaster-holding Series 1 figurine.
{{-}}

===Converting RC Vehicle===
[[File:JadaConvertingOptimusPrime.jpg|upright=1.44|thumb|"We have [[Optimus Prime (G1)/toys#Robosen Collector's Edition|Robosen's Optimus Prime]] at home."]]
*'''Optimus Prime Converting R/C''' (2022)
**''Accessories:'' Remote controller
:This Optimus Prime is a remote controlled figure capable of automatically converting between robot mode and truck mode on command.

:He measures approximately 13 inches tall in robot mode and 12 inches long in truck mode, and features lights, sounds and voices.

{{--}}

==''ReAction''==
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2020, 2024)}}</ul>
:*''Accessories'': Ion Blaster

: Released in [[Super7]]'s line of multi-property 3.75-inch action figures, ''[[Super7#ReAction|ReAction]]'' Optimus Prime was naturally part of the first wave of ''Transformers'' figures. It is a non-converting action figure with 5 points of articulation (simple swivel shoulders, legs, and neck) and an [[Ion blaster]] accessory he can only hold in his right hand.

: It should be noted that despite being a "retro-styled" figure, the hard-plastic points on his helmet are very accurate to the animation model and therefore ''incredibly'' pointy, like, "would not be allowed on a toy for the 5-13 set" pointy.

: As with all releases in the ''ReAction'' toyline, Optimus comes packaged in a small cardback that emulates the nostalgic packaging style of [[Kenner]] ''[[Star Wars (franchise)|Star Wars]]'' action figures of the late 1970s to early '80s.

: In late 2024, this figure was reissued with no obvious changes, now in a [[blindpacking|blindpacked]] box assortment.

{{-}}{{anchor|ReActionCyberchrome}}
<ul class="iconlist">{{Bp-a1|'''Cyberchrome Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: This version of the Optimus ''ReAction'' figure features glossy metallic paint. That's about it. Whee.

: This figure was a [[Target]] exclusive in the US, released alongside the "[[Megatron (G1)/merchandise#ReActionCyberchrome|Cyberchrome Megatron]]" figure.

{{-}}{{anchor|ReActionFallenWave4}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: Released in the fourth wave of ''ReAction'', this all-gray version of Optimus features a new torso tooling with open chest panels revealing a (non-removable) Matrix of Leadership.

: This is the first of ''three'' different figures of the same concept to be sold under the name "Fallen Leader Optimus Prime"; the other two (below) are [[Target]] exclusives.

: This figure was initially solicited to retailers as "Dead Optimus Prime" before the slightly gentler name change... but "Dead Optimus Prime" is still what the figure is labeled on the cardback checklist as of wave 6.

{{-}}{{anchor|ReActionSanta}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Christmas]]-themed redeco, "Optimus Santa" features a red and green color scheme, a tufted Santa cap, and his ion blaster is striped to resemble a candy cane.

: This figure is a "shared exclusive" between, multiple online outlets. The card still refers to him as just "Optimus Prime" (albeit in cursive on a gift tag), but the toy is listed as "Optimus Santa" on Super7's website, and "Optimus Prime Santa" on other sites.

{{-}}{{anchor|ReActionFallenTarget}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: This Target-exclusive version of the "Fallen Leader" concept is just the normal Optimus figure with the closed-up chest done in the grays of the initial "Fallen Leader" figure. Exciting! And clearance fodder!

: This figure was released alongside the "[[Megatron (G1)/merchandise#ReActionChromeCommander|Chrome Commander Megatron]]" figure.

{{-}}{{anchor|ReActionGolden}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The third [[Target]]-exclusive Optimus Prime figure, this one has a head-to-toe gold redeco, depicting his appearance in the end of "[[The Golden Lagoon (episode)|The Golden Lagoon]]".

: This figure was released alongside the similarly-decoed [[Megatron (G1)/merchandise#ReActionGolden|"Golden Lagoon" Megatron]] figure.

{{-}}{{anchor|ReActionFallenTargetColor}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The second Target-exclusive "Fallen Leader" version of Optimus, and the third "Fallen Leader" overall (kinda morbid, y'all), and ''fourth'' Target-exclusive Optimus (overkill much?), this is the open-chest version of Optimus in his normal "living" color scheme, now better depicting the Matrix transfer moment when Prime was still (barely) alive.

: This figure was released alongside the thematically-similar [[Megatron (G1)/merchandise#ReActionFallenEvolution|"Fallen Evolution" Megatron]] figure.

{{-}}{{anchor|ReActionOpHalloween}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Halloween]]-themed redeco of the standard Optimus figure, in orange and black. Pumpkinmus Prime.

: This figure was a "shared exclusive", sold through multiple online retailers. Online listings call it "Optimus Prime (Halloween)", but the actual card simply says "Optimus Prime".

<ul class="iconlist">{{Bp-a1|'''Nucleon Quest Optimus Prime''' (2024)}}</ul>
:*''Accessories'': Ion blaster

: Wave eight of ''ReAction'' saw this black redeco of Optimus Prime, inspired by the 2001 [[Optimus Prime (G1)/toys#NucleonQuest|Nucleon Quest Super Convoy]] figure.

{{-}}

*'''Ark Base''' (Playset, 2024)

:*''Accessories'': Ion blaster

: The ''ReAction'' Ark Base playset included a version of Optimus Prime with his chest windows painted to add simulated reflective detail.
{{comingsoontoy}}
{{-}}

==''R.E.D. [Robot Enhanced Design]''==
[[File:TF-R.E.D.-Optimus-Prime.jpg|upright=1.66|thumb|Armored Convoy not included.]]
*'''Optimus Prime''' (2020)
**''Accessories'': Ion Blaster, Energon Axe, [[Matrix of Leadership/toys#R.E.D. .5BRobot Enhanced Design.5D|Matrix of Leadership]], 4 alternate hands
{{toydesigner|[[Emiliano Santalucia]] (concept artist)}}

:Released as part of the first wave of the ''[[Transformers R.E.D.]]'' line, Optimus Prime is a non-transforming 6-inch action figure akin to the ones from Hasbro's ''[[Marvel Comics|Marvel]] Legends'' and ''[[Star Wars (franchise)|Star Wars]] The Black Series'' lines. He is highly articulated and features extensive paint operations for [[show-accuracy]].

:Optimus comes with six hands altogether: a pair of closed fists, a pair of gently beckoning hands, a right hand for his included [[Ion blaster|Ion Blaster]] accessory, and a right hand with the index finger extended. He also features an [[Energon-axe|Energon Axe]], compatible with either wrist in place of his hand. Lastly, he includes a Matrix of Leadership, which can store in his chest thanks to his opening windows.

:As with all ''R.E.D.'' toys, Optimus Prime was a Walmart exclusive in Canada and the United States, and was later made available on [[Hasbro Pulse]] in limited quantities.

: This mold was used to make ''R.E.D.'' [[Ultra Magnus (G1)/merchandise#R.E.D. .5BRobot Enhanced Design.5D|Ultra Magnus]].
{{-}}

==''Super Cyborg''==
[[File:SuperCyborgOptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (2018)
**''Accessories'': Ion blaster, torso plate

:''Super Cyborg'' Optimus Prime is an 11-inch-tall non-transforming figure with 7 points of articulation. Its main distinguishing feature is that the entire front of the robot torso is removable, exposing not just the expected Matrix of Leadership but also many other sculpted mechanical details within Prime's body.

*'''Optimus Prime (clear)''' (2018)
**''Accessories'': Ion blaster, torso plate

:The transparent plastic version of this figure was exclusive to [[San Diego Comic-Con]] 2018.

*'''Optimus Prime (Dead)''' (2018)
**''Accessories'': Ion blaster, torso plate

:This dark grey version was exclusive to [[New York Comic Con]] 2018.

*'''Optimus Prime (Clear Red / Blue)''' (2023)
**''Accessories'': Ion blaster, torso plate

:This translucent version was exclusive to New York Comic Con 2023.
{{-}}

==Figural Bag Clip==
[[File:FiguralBagClip OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2020)
:Released by [[Monogram]], this 2.5" 3D foam bag clip takes the form of a chibi Optimus Prime.

:It was available only as part of a [[Blindpacking|mystery blind bag]] collection.
{{-}}
[[File:FiguralBagClip 2021 Optimus.JPG|thumb]]
*'''Optimus Prime''' (2021)
:A non-articulated, non-transforming 3" figure of Optimus Prime with an attached clip, also released by Monogram.

:Unlike the previous year's release it was sold on a standard cardback.

{{-}}

==D'elicce==
{{note|All Easter eggs listed below were exclusive to Lojas Americanas, a popular Brazilian chain store.}}
[[File:Brazilian Transformers Easter Eggs 2021.jpg|250px|thumb]]
*'''Transformers Easter egg''' (90g, 2021)
:In 2021, [[Brazil]]ian chocolate manufacturer Top Cau, under its kid-focused branch D'elicce, released a pair of ''Transformers''-themed [[Easter]] eggs that included a popcorn bucket of [[super deformed|cutesy proportions]] based on either Optimus Prime or Bumblebee.

{{-}}{{anchor|delicce2025}}
[[File:Brazilian Optimus Prime Easter Egg 2025.jpg|thumb|250px]]
*'''''Transformers'' Easter egg''' (90g, 2025)
:In 2025, D'elicce (or rather "Delice" as its spelled in some parts of this product) released an Optimus Prime-themed egg that came with a single piece of red plastic molded after the character's evergreen truck mode with trailer attached, inside of which the egg comes stored. Unfortunately, it means that not even his wheels can roll.

:The toy comes with a stickersheet that must be applied manually and is not packaged with pre-applied stickers as shown in the official stock photos.

{{-}}

==''Minimates''==
*'''Optimus Prime''' (Series 1, 2021)
**''Accessories'': Laser rifle, energy axe, stand

:Part of the first wave of Transformers [[Minimates]] from Diamond Select, this Optimus Prime is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. The Matrix of Leadership is printed on the Minimate figure's chest and is visible through the windows on the chest covering. Due to their small size, all 4 figures in each series are sold in the same blister card.

*'''VHS Minimates Box Set''' (2022)

:''Minimates'' Optimus Prime was rereleased as part of a [[San Diego Comic-Con]] 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles a [[Family Home Entertainment]] VHS tape. Only 2500 of this set were produced.
{{-}}

*'''Stasis Lock Optimus Prime''' (2023)
:Another San Diego Comic-Con brought another VHS-cassette-themed ''Minimates'' 4-pack exclusive, with another redeco of Optimus Prime - this time depicting him in "stasis lock" (meaning his grey dead color scheme, now with an opening empty chest compartment). Only 1500 of this set were produced.
{{-}}

==''ULTIMATES!''==
[[File:Super7 Ultimates Optimus Prime (G1).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion blaster, energon axe, Matrix of Leadership, surfboard, jetpack, basketball, energy restraints, left & right fists, 2 open hands, right gripping hand, left pointing hand, alternate head

: Part of the first wave of ''[[Super7#Transformers ULTIMATES!|Transformers ULTIMATES!]]'' from [[Super7]], Optimus Prime is a 7-inch-tall action figure based on his cartoon model. He features multi-directional joints at the neck, shoulders, wrists, hips, and ankles; plus swivel biceps, elbows, knees, and a bit of ab crunch. His hands pop out at the wrists so they can be replaced with his additional spare hands in different poses (or the obligatory Energon Axe), and his head can be replaced with an alternate based on the original Optimus toy.

: He also features a ''lot'' of accessories, more than any other toy in the wave, including a number of episode-specific ones: [[Sideswipe (G1)|Sideswipe's]] jetpack from "[[More than Meets the Eye, Part 3]]", a ridable surfboard from "[[The Ultimate Doom, Part 3]]", energy restraints from "[[S.O.S. Dinobots]]", and his giant basketball from "[[The Master Builders (episode)|The Master Builders]]". He also includes a miniature [[Spike Witwicky (G1)#ULTIMATES!|Spike Witwicky]] figurine.

: Preorders for Optimus Prime (and the rest of Wave 1) opened on [[January 29]] 2021, and closed on [[February 28]], with the toys purportedly shipping in winter of that year but not actually arriving until May 2022.

{{-}}{{anchor|Alligaticon}}
[[File:Ultimates Alligaticon.jpg|upright=1.66|thumb]]
<ul class="iconlist">{{Bp-d1|'''Alligaticon''' (2022)}}</ul>
:*''Accessories'': Optimus Prime head; Optimus Prime rifle; Decepticon tower tip w/ arm; [[Battle taxi]]

: Part of the third wave of ''ULTIMATES!'', the [[Alligaticon#Merchandise|Alligaticon]] is a 10-inch-long non-transforming figure made to emulate the the Optimus-parts creature's cartoon model to pretty exacting detail (including the ''lack'' of detail on most of its flat surfaces). It makes ample use of multi-swivel joints to give its limbs a relatively wide range of motion, plus extensive tail jointing, a mid-body bend, some neck waggle, and an opening jaw.

: It comes with multiple "[[City of Steel (episode)|City of Steel]]"-themed accessories, including a tower with Optimus's arm attached to it. The arm is permanently attached, but the hand uses the same wrist-joint as the individual Optimus figure, and can be popped off and replaced with his other hands if you like (Optimus's wrist-pegs are larger than many other figures', so sadly cross-compatibility is limited at best). Curiously, while the arm appears to be identical to the prior figure's arm, the gun is not, having a trigger guard the original version lacks.

: It also comes with Optimus's disembodied head on a ball-jointed "neck" with trailing wires. Like the arm, the head is the same mold as the original Optimus, but this time cast in clear-blue plastic painted over, with a small gap in the back of the head to attempt [[light-piping]]... but depending on the strength of the light, it might just shine through the paint. Since it's the same mold, one could theoretically swap it out, but trying to push that wire-mass back into the socket seems like it'd be a bit of a pain in the neck (wocka wocka!).

: Preorders for the Alligaticon (and the rest of Wave 3) opened on [[December 1]], 2021, with the toys projected to ship in fall 2022... and ''actually'' shipping in November 202''3''.

{{-}}{{anchor|Ultimates2}}
[[File:Super7 Ultimates Optimus Prime (Fallen Leader).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Fallen Leader)''' (2023)}}</ul>
:*''Accessories'': 2 fists, 2 open hands, 2 Matrix-grip hands, trigger-grip right hand, Matrix of Leadership, Matrix cover, ion blaster

: This retool and redeco of ''ULTIMATES!'' Optimus Prime is the latest of several representations of his dead body from "[[The Transformers: The Movie]]," now with a greyscale paint scheme, a heavily damaged left torso section, and cracks all over him (and on his rifle too for good measure). His chest is redesigned to allow it to open and reveal the Matrix.

: Preorders opened in June 2022, with the expectation that of figures shipping in May 2023.... but actually January 2024
{{-}}

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': ion blaster

: The original ''ULTIMATES!'' Optimus Prime was repackaged as a "Transformers Deluxe" figure, physically identical to the first release but now lacking all accessories except the gun. Its new packaging resembles a VHS clamshell box; specifically, the colors and trade dress strongly resemble the [[Video Gems]] tapes, while the character artwork and subtitle are taken directly from the [[The Original Transformers|Kid Rhino]] tapes.

: This piece was exclusive to, of all things, Macy's.

==''Pop!''==
[[File:Funko Pop Optimus Prime G1.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:Released as part of the ''Pop! Retro Toys'' segment, [[Funko Pop!|Funko]]'s ''Pop!'' Optimus Prime is a super deformed vinyl figure based on his original Generation 1 toy, though his eyes are painted blue like in the cartoon.

:This mold was later redecoed as [[Nemesis Prime (G1)#Pop!|Nemesis Prime]].

{{-}}{{anchor|PopMetallic}}
[[File:Funko Pop Amazon Metallic Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:An [[Amazon (website)|Amazon]] exclusive redeco of the figure above, this version of Optimus Prime features a more metallic paintjob.

{{-}}{{anchor|PopGIJoe}}
[[File:Funko Pop Mystery Box Optimus Prime Cobra Commander.jpg|thumb|upright=1.44]]
*'''Funko Mystery Box: Transformers vs. G.I. Joe''' (Giftset, 2021)
**''ID number:'' '''44'''

:Available only as part of a GameStop exclusive giftset, this retooled Optimus Prime comes with his Energon axe attached to his right hand instead of his ion blaster and comes [[Blindpacking|blindpacked]] inside a ''Transformers vs. [[G.I. Joe (franchise)|G.I. Joe]]''-themed lunch box alongside a ''Pop!'' [[Cobra Commander#Pop!|Cobra Commander]] figure, a Decepticon logo decal, a Cobra logo keychain, and a set of four pins of Optimus Prime, Cobra Commander, [[Megatron (G1)/merchandise#Pop!|Megatron]] and [[Duke (G.I. Joe)#Pop!|Duke]].

{{-}}{{anchor|PopJumbo}}
[[File:Funko Pop Jumbo 10-inch Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (Jumbo size, 2021)
**''ID number:'' '''71'''

:A larger version of the regular ''Pop!'' Optimus Prime measuring 10-inches tall.

{{-}}{{anchor|PopKeychain}}
[[File:Funko Pocket Pop Keychain Optimus Prime.jpg|thumb|upright=1.11]]
*'''Optimus Prime''' (Pocket ''Pop!'' Keychain, 2021)

:A smaller version of the regular ''Pop!'' Optimus Prime with a keychain attached to his head.

{{-}}{{anchor|Digital Pop!}}
*'''Optimus Prime''' ([[Funko Pop!#Digital Pop! NFTs|Digital ''Pop!'']], 2022)
**''Rarity:''
***''Monochrome:'' '''Common'''
***''Static:'' '''Common'''
***''Glowing:'' '''Uncommon'''
***''Chrome:'' '''Rare'''
***''Original:'' '''Epic'''
***''Monochrome, Matrix-opening:'' '''Epic'''
***''Gold, Matrix-opening:'' '''Grail'''
:{{W|Non-fungible token|NFT}}s depicting Optimus Prime in the Funko style. Some variants are depicted opening the Matrix over Cybertron, one of which (the Grail one) could be redeemed for a chance to get a physical version of the depicted figure. Said variant was limited to 999 pieces.
<center><gallery heights=200>
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_MONOCHROME.gif|Remember [[The many deaths of Optimus Prime#The Transformers: The Movie|this one?]]
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_STATIC.gif|Not gray, but still may as well be dead.
File:TRANSFORMERS_UNCOMMON_OPTIMUS-PRIME_GLOW.gif
File:TRANSFORMERS_RARE_OPTIMUS-PRIME_REDCHROME.gif|[[The Return of Optimus Prime, Part 1|Oops.]]
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME_ORIGINAL.gif
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME-GOLDVARIANT_MONOCHROME.gif
File:TRANSFORMERS_GRAIL_OPTIMUS-PRIME-GOLDVARIANT_ORIGINAL.gif
</gallery></center>
{{-}}{{anchor|PopDigital}}
[[File:Funko Pop Digital Optimus Prime.jpg|thumb|upright=1.44|Stealing NFTs is the right of all sentient beings.]]
*'''Optimus Prime''' (2022)
**''ID number:'' '''49'''

:Part of the ''Pop! Digital'' segment, this regular-sized vinyl figure portrays Optimus opening the Matrix of Leadership and is entirely painted gold. It could only be acquired by redeeming the Grail NFT above.

{{-}}{{anchor|Pop! Pin}}
[[File:Funko-Pop-Pin-Optimus-Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (''Pop!'' Pin, 2022)
**''ID number:'' '''18'''
**''Accessories:'' Display stand
:A metallic enamel pin based on Optimus Prime's vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

:A "redeco" of this pin as [[Nemesis Prime (G1)#Pop! Pin|Nemesis Prime]] was also released as a limited edition chase variant.

{{-}}{{anchor|Pop! Masks}}
[[File:Funko Pop mask Optimus Prime.jpg|thumb|upright=1]]
*'''Optimus Prime''' (''Pop!'' Masks, 2022)
:Released by Disguise Costumes in collaboration with Funko and exclusive to Walmart, ''Pop!'' Masks Optimus Prime is a large half face mask based on the head of the vinyl figure.

{{-}}{{anchor|Pop! Hallmark}}
*'''Optimus Prime''' (Christmas tree ornament, 2022)
:Released by [[Hallmark]] and also exclusive to Walmart, this Optimus Prime Christmas tree ornament is virtually identical to the vinyl figure in appearance.

{{-}}{{anchor|Fundays1}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Exclusive to a Funko-oriented event called Fundays, this regular-sized vinyl figure portrays [[Freddy Funko]] cosplaying as Optimus Prime. The body of this figure is the same as the regular Optimus, while the head has been modified to incorporate Freddy's face. This regular version was limited to 1500 pieces.

{{-}}{{anchor|Fundays2}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:A metallic version of the Freddy Funko as Optimus Prime figure was also available, now limited to only 500 pieces.

{{-}}{{anchor|Fundays3}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Also available and limited to 500 pieces was a version of Freddy Funko as Optimus Prime that glows in the dark.

{{-}}{{anchor|PopPotato}}
*'''Mr. Potato Head Optimus Prime''' (''Pop! Digital Retro Toys'', 2022)
**''Rarity:'' '''Grail'''
**''ID number:'' '''127'''
:Similar in concept to other [[Mr. Potato Head]] toys, this vinyl figure is a representation of said character taking the appearance of Optimus Prime, except it can't be taken apart piece by piece.

:This figure is limited to 1550 units and can only be acquired redeeming an NFT representing this version of the character.

{{-}}{{anchor|PopLights}}
*'''Optimus Prime''' (Lights and Sounds, 2023)
**''ID number:'' '''120'''
**''Accessories:'' Base
:A standard-sized figure released in the ''Retro Toys'' line, "Lights and Sounds" Optimus Prime features... well, lights and sounds. He also includes a display base, and is posed with his left arm pointing forward and his right hand holding his blaster.

:This figure is exclusive to the Funko Shop online store.

{{-}}{{anchor|Pop! Tee}}
*'''Optimus Prime Tee''' (T-shirt, 2023)
:A T-shirt available on Funko's online store, it features artwork of ''Pop!'' Optimus Prime in the same pose and style as the original Generation 1 Optimus Prime packaging art.

{{-}}{{anchor|Pop40Years}}
*'''Optimus Prime''' (2024)
**''ID number:'' '''131'''

:Released in celebration of the 40 years of the franchise, this regular sized ''Pop! Retro Toys'' Optimus Prime is a similar mold to the original release, but is doing a different pose and features toy-accurate yellow eyes.

{{-}}{{anchor|Pop40Years2Pack}}
*'''Optimus Prime & Megatron''' (2-pack, 2024)

:A Hot Topic exclusive release of the 40th anniversary Optimus Prime and [[Megatron (G1)/merchandise#Pop40Years2Pack|Megatron]] vinyls with a metallic finish to their paintings.
{{--}}

==Modern Icons==
[[File:Modern_Icons_Optimus_Prime_helmet.jpg|thumb|upright=1.66|GIVE ME MY FACE.]]
*'''Optimus Prime Modern Icons Replica Helmet''' (December 27, 2021)
:A collaboration between Hasbro and statue and replica brand Modern Icons, this is a wearable helmet for adult collectors, based on Optimus Prime's head. It features light-up eyes and authentic sounds and phrases.

:Originally due for release on August 16, 2021, the Optimus Prime helmet was delayed until December 27 (as was [[Megatron (G1)/merchandise#Modern Icons|its Megatron counterpart]]). The helmet is a GameStop exclusive in the United States.
{{--}}

==''Super Shogun''==
*'''Optimus Prime''' (2021)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Another "retro-styled" non-transforming figure by [[Super7]], ''Super Shogun'' Optimus Prime is meant to be an homage to the 1970s "{{w|Shogun Warriors (toys)|Shogun Warriors}}" toyline. To match the famous features of those older toys, this Optimus stands 24" tall and is mostly made of hollow plastic, with 3 points of articulation, wheels on his feet, and a spring-loaded firing left fist. His chest doors open to reveal a removable Matrix of Leadership. Suggested retail price was $350 - hopefully if you're old enough to remember "Shogun Warriors" you've gotten a good job by now.

*'''Optimus Prime (Fallen Leader)''' (2022)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Continuing the trend from their ''ReAction'' and ''ULTIMATES!'' Optimus Prime figures above, Super7 also produced a grey redeco of ''Super Shogun'' Optimus Prime representing his dead body. {{-}}

==''Zōteki''==
[[File:ZOTEKI-024-Optimus-Prime.jpg|thumb|upright=1.66|I farted.]]
*'''Optimus Prime''' ([[2021]])
**''ID number'': '''024'''

:A collaboration between [[Hasbro]] and statue/replica brand [[Jazware]], ''[[The Transformers (franchise)|The Transformers]]'' was added as a part of the ''[[Zōteki]]'' line alongside other iconic brands such as [[Marvel Comics|Marvel]], to recreate some of the main "Generation 1" characters. The 24th figure of the ''Zōteki'' line; Optimus Prime wields his iconic [[Ion blaster]].

:Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
{{-}}

==Eaglemoss==
[[File:EaglemossChess OptimusPrime.jpg|upright=1.11|thumb]]
* '''Transformers Gen-1 Chess Set''' (<s>2021</s>)
:In the planned [[Chess#Eaglemoss|Transformers Chess Set]] by [[Eaglemoss]], a relatively large and very well detailed statue of Optimus Prime was slated to be the standard King piece on the Autobot side.

:A Kickstarter campaign to raise the necessary funds for this project was launched, but failed to meet its goal by September 24, 2021 and the whole thing was canceled. The Optimus Prime piece managed to technically get a very limited release, however, as some online influencers in the ''Transformers'' fandom received copies gifted to them by Eaglemoss during the Kickstarter campaign.
{{canceledtoy}}
{{-}}

==e-HOBBY==
===''Transformers Character Card''===
{{anchor|TCC G1}}
[[File:Transformers Character Card G1 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Convoy & Megatron Set''' ([[January 25]], [[2022]])
**''ID number:'' '''01 & 02'''
{{toydesigner|[[Shin Sasaki]] (illustration)}}

:Released as part of the first wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Roller (G1)|Roller]]) and [[Megatron (G1)|Megatron]] (with [[Starscream (G1)|Starscream]], [[Thundercracker (G1)|Thundercracker]] and [[Skywarp (G1)|Skywarp]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#01|Translation of G1 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Laser}}
[[File:Transformers Character Card G2 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Battle Convoy & Megatron Set''' ([[March 14]], 2022)
**''ID number:'' '''11 & 12'''

:Released as part of the second wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime and Megatron in their ''[[Transformers: Generation 2 (franchise)|Generation 2]]'' bodies along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#LaserOptimusPrime|Laser Optimus Prime]]" toy.
::*''[[Source:Transformers Character Card#11|Translation of G2 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Black}}
[[File:Transformers Character Card Megatron Black and Convoy Black.jpg|upright=1|thumb]]
*'''Transformers Card Binder (includes 2 special cards)''' ([[November 1]], 2022)
**''ID number:'' '''EX'''

:Released in its fifth wave as something of a "season one finale" to the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this 40-slot binder intended to contain the entire ''Character Card'' series thus far is packed with a pair of holographic trading cards depicting super-deformed art of Optimus Prime and Megatron in the forms of their first e-HOBBY exclusive toys along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the ''[[Hybrid Style]]'' "[[Optimus Prime (G1)/toys#THS02B|Convoy Black Version]]" toy.
::*''[[Source:Transformers Character Card#EXOP|Translation of Optimus Prime Black Version's Transformers Character Card]]''
{{-}}

{{anchor|TCC Hero}}
[[File:Transformers Character Card Jhiaxus and Hero OP.jpg|upright=1|thumb]]
*'''Jhiaxus & Convoy Missile Trailer Set''' ([[February 6]], [[2023]])
**''ID number:'' '''41 & 42'''

:Released as part of the sixth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Jhiaxus (G2)|Jhiaxus]] and ''Generation 2'' Optimus Prime along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#HeroOptimusPrime|Hero Optimus Prime]] toy.
::*''[[Source:Transformers Character Card#42|Translation of Hero Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Matrix}}
[[File:Transformers Character Card Matrix and Alpha Trion.jpg|upright=1|thumb]]
*'''Alpha Trin & Convoy Set''' ([[April 22]], 2023)
**''ID number:'' '''49 & 50'''

:Released as part of the seventh wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of "[[Alpha Trion|Alpha Trin]]" and Optimus Prime touting the [[Matrix of Leadership]] along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus's card notably eschews the line's usual [[Power Plans]]-inspired motif for a reproduction of the original 1984 [[Package art#Hasbro|toy packaging mural]] in celebration of the line's 50th release.
::*''[[Source:Transformers Character Card#50|Translation of Optimus Prime (with Matrix)'s Transformers Character Card]]''

{{-}}

{{anchor|TCC Orion}}
[[File:Transformers Character Card Hot Rod and Orion Pax.jpg|upright=1|thumb]]
*'''Orion Pax & Hot Rodimus Set''' ([[August 14]], 2023)
**''ID number:'' '''59 & 60'''

:Released as part of the eighth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Orion Pax and "[[Hot Rod (G1)|Hot Rodimus]]" along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#59|Translation of Orion Pax's Transformers Character Card]]''

{{-}}

{{anchor|TCC Action}}
[[File:Transformers Character Card Action Master Megatron and OP.jpg|upright=1|thumb]]
*'''Convoy (Action Master) & Megatron (Action Master) Set''' ([[December 28]], [[2024]])
**''ID number:'' '''93 & 94'''

:Released as part of the thirteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Armored Convoy]]) and Megatron (with [[Neutro-Fusion Tank]]) in their [[Action Master]] forms along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#93|Translation of Action Master Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Autobot}}
[[File:Transformers Character Card Autobots and Primus.jpg|upright=1|thumb]]
*'''Primus and Cybertron Army Set''' ([[February]], [[2025]])
**''ID number:'' '''101 & 102'''

:Released as part of the fourteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Primus]] in the form of his [[Primus#2010|"Creator" toy]] and the Generation 1 [[Autobot]]s (as represented by Optimus Prime, [[Blaster (G1)|Blaster]], [[Eject (G1)|Eject]], [[Grimlock (G1)|Grimlock]], [[Prowl (G1)|Prowl]], [[Crossblades (G1)|Crossblades]], [[Jazz (G1)|Jazz]] and [[Turbo Board]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#102|Translation of the Autobots' Transformers Character Card]]''

{{comingsoontoy}}
{{--}}

===Acrylic keychain series===
[[File:E-Hobby Optimus Prime and Bumblebee keychains.jpg|upright=1|thumb]]
*'''Convoy & Bumble''' ([[October]], [[2022]])

:Released as part of the first wave of an [[e-HOBBY]] exclusive series, this pair of keychains depicts character art and assets re-used from Optimus Prime and [[Bumblebee (G1)|Bumblebee's]] [[The Transformers: Masterpiece|''Masterpiece'']] releases, namely [[Optimus Prime (G1)/toys#MP44|MP-44 Convoy]] and [[Bumblebee (G1)/toys#MP45|MP-45 Bumble and Spike 2.0]] respectively.

{{--}}

==''Authentics''==
{{anchor|ClipBot}}
[[File:ClipBotsPrime.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2018)

:''Clip Bots'' Optimus Prime is a small [[super deformed]] plush that can be "transformed" into a little tractor trailer by flipping it inside out. It features a plastic clip so it can dangle from whatever you clip it to.
{{-}}
{{anchor|22Mask}}
[[File:Authentics Optimus Prime Mask 2022.jpg|upright=1|thumb|Unlike some Optimus Primes, he'll [[Transformers: Revenge of the Fallen (film)#Quotes|give you his face]] instead.]]
*'''Optimus Prime''' (2022)

:Modeled after Optimus Prime's evergreen design, this [[roleplay toy]] mask was released along side an [[Bumblebee (G1)/merchandise#22Mask|Bumblebee]] version.
{{-}}
{{anchor|AquaPals}}
[[File:AquaPalsLargeOptimus.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2023)

''Aqua Pals'' Optimus Prime was released by [[WAHU]]. It is a plush made out of material designed to dry quickly, allowing it to be played with in water. The large plush is 24 inches tall.
{{-}}

{{anchor|DogToys}}
[[File:CrunchandsqueakOptimusPrime.jpg|upright=1|thumb]]

*'''Crunch & Squeak Optimus Prime''' (2023)

Manufactured by [[Gramercy Products]], ''Crunch and Squeak'' Optimus Prime is a simple dog toy, with a water bottle inside to be crunched. Because of this, its legs are fully attatched to each other. The embroidery color for the outline of the eyes varies, coming in gray or blue.
{{-}}
*'''Squeak & Tug Optimus Prime''' (2023)

''Squeak & Tug'' Optimus Prime is another dog toy by Gramercy Products. It has two rope knots connected from the bottom of each of its legs, for tugging purposes. It also has a mouth ''on top'' of its faceplate.

{{anchor|24Mask}}
[[File:Authentics_Optimus_Prime_Mask_2024.jpg|upright=1|thumb]]
*'''Optimus Prime Mask''' ([[2024]])

:Manufactured by [[Peachtree Playthings]], this mask is a completely new mold based on Optimus Prime's evergreen design, though it's a bit more stylized then the 2022 version. It was found at discount stores such as Dollar Tree with no prior announcement. As with the previous mask, it was released along side an [[Bumblebee (G1)/merchandise#24Mask|Bumblebee]] version.
{{-}}
{{anchor|CBoptimus}}
[[File:Authentics Cyber Battlers Optimus.jpeg|upright=1|thumb]]
*'''Cybertron Battlers Optimus Prime''' ([[2022]])
:Released in the ''Cybertron Battlers'' subline of ''Authentics'', this vinyl figure is a non-transforming, 5.5 inch rendition of Optimus Prime in his evergreen design with limited points of articulation. He has an Energon Axe molded into his right hand.

:He comes packaged either individually with a tag, or in twos in a box together with [[Bumblebee (G1)/merchandise#Authentics|Bumblebee]] and [[Megatron (G1)/merchandise#Authentics|Megatron]].
{{-}}

{{anchor|Teeturtlereverse}}
[[File:Small_Reversible_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Reversible Plushie Optimus Prime''' (2025)

:Released by [[TeeTurtle]], ''Reversible Plushie'' Optimus Prime is a round, [[super deformed]] plush, that can be turned inside out to reveal a truck alternate mode. A 3 inch version was released in blind boxes, while a 6 inch version was made available exclusively at [[Walmart]]. It appears to be based on Optimus Prime's [[evergreen]] design, with a license plate that reads 'ROLL OUT'.
{{-}}
{{anchor|Teeturtlecloudhead}}
[[File:Cloudheads_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Cloudheads Optimus Prime''' (2025)

:Also released by [[TeeTurtle]], ''Cloudheads'' Optimus Prime is another [[super deformed]] plush based off of Optimus's [[evergreen]] design. It is 5 inches tall. It has a large head, and its body is weighted with glass beads.
{{-}}

==Nendoroid==
[[File:Nendoroid G1 Optimus Prime.jpg|upright=1.66|thumb]]
*'''Nendoroid Optimus Prime (G1 Ver.)''' ([[2022]])
**''Nendoroid ID Number'': '''1765'''
**''Accessories'': Ion blaster, Energon-axe, pointing hand

:[[Nendoroid]] Optimus Prime is a [[super deformed]], adorable rendition of the original Autobot commander. It is the first Nendoroid figure released for a "Generation 1" character, as the first Nendoroid figures for ''Transformers'' were for the ''[[Bumblebee (film)|Bumblebee]]'' movie.

:As with most Nendoroids, Optimus Prime can interchange body parts with compatible figures, and comes with an alternative "pointing hand" accessory to aid with specific posing. The figure is packed with Optimus's trademark Ion blaster and Energon-axe weapons (generically referred to as a gun and an energy axe by the Good Smile Company website), the latter of which replaces Optimus's hand when wielded. He also features articulation at the head, knees, shoulders, elbows, and even his chest.

:This mold was later redecoed as [[Nemesis Prime (G1)#Nendoroid|Nemesis Prime]].
{{-}}

==Icon Heroes==
*'''Optimus Prime X Bumblebee Retro Pin Set''' (2022)
: A hard enamel pin based on Optimus Prime's original G1 package art made by Icon Heroes. It comes carded with a [[Bumblebee (G1)/merchandise#Icon Heroes|Bumblebee]] pin.

: This pin was also available in [[Nemesis Prime (G1)#Icon Heroes|Nemesis Prime]] colors.
{{comingsoontoy}}

{{-}}
[[File:Icon-Heroes-Optimus-Prime-Action-Statue.jpg|upright=1.11|thumb|''Of course'' we need another superdeformed Optimus Prime statue, why do you ask?]]
*'''Optimus Prime Action Statue''' ([[2023]])
: A 12" tall polystone statue of Optimus Prime holding his ion blaster and standing over an Autobot insignia base. The statue is slighty superdeformed with an unusually large head and features some neck articulation.

: Each sample is going to be individually numbered and come with a certificate of authenticity.
{{comingsoontoy}}

{{-}}

==Just Play==
{{anchor|Podpals}}
[[File:PodpalsOptimusLarge.jpg|upright=1|thumb]]

*'''Podpals Optimus Prime''' (2023)

Made by [[Just Play]], ''Podpals'' Optimus Prime is a rounded plush. It has tiny flaps of fabric for its legs and head details, while other details are printed on. There are two versions, an 8 inch version and a 3 inch version. They are identical besides their size.

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>

:Optimus Prime is a small, soft plastic figure, 2" tall, with no articulation. It's overall based on his appearance in the G1 cartoon. He does have a noticable lack of paint apps; most notably the windows on his chest not being painted at all.

:The packaging is G1-styled with the classic black-red gradient and the G1 Optimus Prime toy in the top right corner.

[[File:JustPlay_G1_Optimus_Prime.jpg|thumb|upright=.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>

:This figure is identical to the original release. Unlike the original release, however, he also comes with a foil sticker depicting his G1 design on a card with a sort of profile picture on the back and text underneath it saying "OPTIMUS PRIME IS THE LEADER OF THE AUTOBOTS." The packaging is also different as it no longer features Optimus Prime (having been replaced with a block advertising the new card).
: There's a variant of this found at stores like Dollar Tree where the block advertising the card is moved to the top left with a red circle that says "$1.25" in it in the top right instead.

{{-}}

==Kotobukiya==
===Bishoujo Series===
[[File:Bishoujo-Series-OptimusPrime.jpg|upright=1.3|thumb|Looking this good is the right of all sentient beings.]]
*'''Bishoujo Series Transformers Convoy/Optimus Prime''' (January 2023)
**''Accessories'': Alternate masked face
**''Known designers:'' [[Shunya Yamashita]] (artist)

:''[[Kotobukiya]] [[Bishoujo Series]]'' Convoy/Optimus Prime renders the classic Autobot commander as a cute anime girl (formally termed as a ''{{w|Bishōjo}}''). Bishoujo Optimus's necklace represents the [[Matrix of Leadership]], while Prime's trailer and wheels are represented as her suitcase and boots respectively.

:''Bishoujo Series'' Optimus Prime also comes with an alternate [[Mouthplate|masked]] headpiece, and a red display base designed after the Autobot insignia. A Deluxe Edition release also included a B5-sized acrylic board for display, featuring Yamashita's original artwork of the character.

:This statue was later recolored and retooled to create ''Bishoujo Series'' [[Nemesis Prime (G1)#Kotobukiya Bishoujo Series|Nemesis Prime]].
{{-}}
===Frame Arms Girl===
[[File:Kotobukiya-TF-Optimus-Prime-Fumikada-Shimane-Ver-kit.jpg|thumb|upright=1.66|Minerva's <s>Ginrai</s> Optimus Prime cosplay.]]
*'''Convoy/Optimus Prime Humikane{{sic}} Shimada Ver.''' (June 2025)
**''Accessories'': 5 pairs of hand parts, 2x2 Faceplates (Android, Human), Front hair/helmet parts for human face config, Ion Blaster, Energon Axe
**''Known designers:'' [[Fumikane Shimada]] (artist)

:Designed by Humikane (actually "Fumikane") Shimada of ''Frame Arm Girls'' and ''30 Minutes Sisters'' fame, this 135mm articulated ''FA Girl'' model kit (though technically not referred to as such on the box, she is listed as part of the ''FA Girl'' product line on Kotobukiya's website) of Optimus Prime/Convoy is another personified take of the character compared to the ''Bishoujo Series'' statue above. Aside from her hand parts and the two signature weapons, Optimus also comes with two types of faceplates, with two expressions for each, and a few front hair/helmet parts for each configuration. The rear truck wheels on her legs can be flipped down to form a pair of support skates.
{{--}}

==Micro Machines==
[[File:MMMPrime&Tracks.jpg|upright=1.66|thumb]]
*'''Optimus Prime Hauler Playset''' (2022)
**''Accessories'': [[Tracks (G1)/toys#Micro Machines|Tracks]] vehicle, decoder
{{charstubtoys}}

==XM Studios==
*'''Optimus Prime''' (2022)

:This hand-painted porcelain statue of Optimus Prime stands over 26" tall and features alternate arms to allow owners to display him in different poses or switching out his signature laser rifle for his energon axe. His chest-mounted Matrix of Leadership lights up, and the set also includes a sculpted version of the truck mode to display next to the robot. Suggested retail was about $1,700.

*'''Optimus Prime Bust''' (2023)

:A four-foot-tall bust of Optimus Prime, with hand-burnished metallic features and a $4,000 price tag.
{{-}}

==''Transformers × Mini World''==
[[File:MiniWorldOptimus.jpg|thumb|upright=1.66]]
*'''Optimus Prime''' (2023)
**''Accessories'': Transforming base, gun, axe, 2 smokestacks, machine part, crane arm, 2 connectors

:''[[Transformers × Mini World]]'' Optimus Prime is a tie-in to the popular [[China|Chinese]] game ''[[Mini World]]''. It comes with a display base which can fold up into a cube-shaped representation of Prime's truck mode, complete with rolling wheels. The figure can transform into a storage mode and store fully inside the cube, or you can remove his head and replace it with the folded up cube. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and axe accessories. The set includes two smokestacks that can be pegged onto the truck-cube mode.

:Each set includes [[Build a Figure]]-like machinery components which can be combined with parts from other sets to make new structures.

:It is exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.
{{-}}

==Mochibots Transformers Plush==
[[File:MochibotsPrime.jpg|upright=1.3|thumb|It was either this or a banana to show how tall I am. And I'm ''NOT'' Primal!]]
<ul class="iconlist">{{Bp-a1|'''Mochibots "Transformers" Plush Convoy''' (2023)}}</ul>
:Apart of the line of cute, cuddly Transformers Plushies, [[Mochibots Transformers Plush|Mochibots]] Convoy (otherwise known as ''Optimus Prime'') is a 5.5 CM tall variation of the character, with Sunbow cartoon-accurate white pants and all! This Convoy is given a "Fumo" stylization, making the robotic detailing more rounded and soft, with stubby limbs and a cute, somewhat stern expression. Every detail is sewn-in, leading to him and the rest of the Mochibots line having a premium feel, with added texture and depth added to each detail. In addition to all this cute Convoy's offerings, he has a block of stuffed material in the back to represent his "Backpack", and a stitched-on Autobot logo! Though, much like [[Cliffjumper (G1)/toys#Mochibots Transformers Plush|Cliff]], the Autobot logo seems to have a squinting expression, likely a limitation of how far the detail can go with this process. Like many other Mochibots, Convoy also features a special, reflective material in his eyes and windows, with light giving it a special shimmer effect whenever it hits it.

:Convoy was released in the Summer of 2023 in "Volume 1" of the Mochibots line, alongside Cliff, Bumble, and Convoy's Shattered Glass counterpart. This line was exclusive to China and Japan, with almost all of them being locked to Asia via [[amiami|amiami's]] digital storefront.

{{-}}

==Fools Paradise==
{{anchor|LOWFOOL}}[[File:LOWFOOL League of Steel Optimus Prime.jpeg|upright=1.66|thumb|Some contrast to the bishoujo, huh?]]
*'''Optimus Prime''' (2023)
**''Accessories'': Football

:Part of a collaboration between Hasbro and [[Hong Kong]]-based online store ZCWO, Optimus Prime joins the "League of Steel" subline of [[Fools Paradise]]'s LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues of [[Neon Genesis Evangelion|Evangelion]]s and {{w|Gundam}}s. He is depicted as a human man wearing heavily Optimus Prime-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache (not, as you might surmise, as a reference to [[Peter Cullen]]'s own face fuzz).

:Preorders for Prime opened in June 2023, with a projected release date of November.

{{-}}

{{anchor|ZCWO}}[[File:Fools Paradise Optimus Prime statue.jpeg|upright=1.3|thumb]]
*'''Optimus Prime''' (2024)

:A second statue of Optimus Prime by Fools Paradise portrays Optimus Prime in a much more conventional (if heavily stylised) design. This vinyl statue of Prime stands approximately 60cm tall, and features light up LED eyes and apparently boasts a full range of articulation. It also features a somewhat weathered paint job.

:Preorders opened in November 2023, with a projected release date of March 2024.
{{comingsoontoy}}

{{-}}

==McFarlane Toys==
{{anchor|PagePunch}}[[File:Page Punchers Optimus Prime and Megatron.jpeg|upright=1.66|thumb|If you squint, you can just ''barely'' make out the lack of a waist swivel.]]
*'''Optimus Prime and Megatron''' (2024)
: ''[[Page Punchers]]'' Optimus Prime is 3-inch non-transformable action figure based off his [[IDW Publishing|IDW]] design.

: He comes in a two-pack with [[Megatron (G1)/merchandise#PAGEPUNCH|Megatron]], packaged with [[New Cybertron Part 1: To Walk Among the Chosen|''Optimus Prime'' #1]] and [[Dissolution Part 6: This Machine Kills Fascists|''Lost Light'' #6]].

{{-}}

==''Hot Wheels''==
{{picsneeded}}
{{anchor|HWTrackFleet}}
[[File:Hot Wheels Track Fleet Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1| '''Optimus Prime''' (Track Fleet, 2024)}}</ul>
:*''Accessories'': Trailer (detachable)
{{toydesigner|[[Charlie Angulo]] ([[Mattel]])}}
:''[[Hot Wheels (franchise)|Hot Wheels]]'' Track Fleet Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Unlike the concurrently released [[Bumblebee (G1)/merchandise#HWScreenTime|''HW Screen Time'' Bumblebee]], Optimus does ''not'' have a sculpted robot face on his undercarriage.

{{-}}{{anchor|HWSkate}}
[[File:Hot Wheels Skate Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Skate, 2024)}}</ul>
:*''Accessories'': Finger sneakers
:Part of the ''Hot Wheels Skate'' subset, this is an Optimus Prime-themed finger skateboard that comes with a pair of red finger sneakers. The shape and packaging use Dreamwave-era artwork of Optimus Prime.

{{-}}{{anchor|HWScreenTime}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (HW Screen Time, 2025)}}</ul>
:*''Mainline ID number:'' 104/250
:*''HW Screen Time ID number:'' 6/10
{{toydesigner|[[Manson Cheung]] and Leeway Chang ([[Mattel]])}}
:''Hot Wheels'' HW Screen Time Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Compared to the ''Track Fleet'' version, this version of Optimus ''has'' a sculpted robot face on his undercarriage, is larger and does not feature a trailer. It is largely based on the transforming ''Mattel Creations'' version of Optimus but with some modifications for cost reasons.

{{--}}

==''Beyblade X''==
[[File:Beyblade_X_Transformers_OptimusPrime.jpg|thumb|Not pictured: Optimus Prime using this to part the Red Sea.]]
*'''Optimus Prime and Megatron Multipack Set''' (2024)

:'''Optimus Prime 4-60P''' was available in a two-pack with [[Megatron (G1)/merchandise#Beyblade X|Megatron 4-80B]], which was exclusive to Amazon in Hasbro territories, and exclusive B4-sponsored stores in Takara-Tomy territories. It consists of three pieces that can be interchanged with those of [[Beyblade#BEYBLADE X|other ''Beyblade X'' tops]]; an attacking "Blade" primarily made of metal, a "Ratchet" that locks parts together and determines height, and a "Bit" that touches the ground and determines movement.

:The "Optimus Prime" Blade features evergreen art of Optimus Prime on its central Gear Chip and is partial of the mainline ''Beyblade X'' Blade "Helm Knight". The Ratchet (4-60) and Bit (Point) are recolored parts from other ''Beyblade X'' tops.

:In Hasbro territories, a QR Code sticker hidden underneath the Blade can be scanned into the ''Beyblade X'' companion app. In Takara-Tomy territories, the QR Code stickers are omitted in favor of a Beycode Card packed with the instructions. However, scanning any of these QR codes only awards the player with in-app points, and will not unlock the Beyblade for in-game use like it would for any mainline ''Beyblade X'' tops.

{{-}}

==Yolopark==
===AMK===
{{anchor|AMKPro}}
[[File:YoloparkAMKProG1OptimusPrime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released as part of Yolopark's AMK Pro line, Optimus Prime comes in pre-assembled modules as opposed to traditional model kit runners. This allows him to be assembled quickly and easily without tools. Unlike Yolopark's regular AMK line, the AMK Pro line features diecast parts as well as light-up features. In Prime's case, his eyes will light up when tapping his head with a magnet. The feature requires one CR927 battery which is not included.

:The fully assembled figure resembles the ''Masterpiece'' Convoy 3.0 and features an opening Matrix chamber and fully articulated hands, eliminating the need for alternate hands. Both the ion blaster and Megatron gun can be wielded by his hands, though removing the stalk from the Megatron gun makes this much easier.

:The figure was redecoed into Nemesis Prime.

{{-}}
{{anchor|AMKHasbroEdition}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-(Hasbro-Edition).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Hasbro Edition, 2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Stand with Teletraan-1 Backdrop

:The AMK Pro Optimus Prime kit is re-released under the "Hasbro Edition" branding. In this release, the die-cast parts have been replaced with plastic, and the light-up feature and the Megatron gun accessory are no longer included. In addition, Prime's display stand also comes with an additional Teletraan-1 backdrop for the arm unit.

{{-}}
{{anchor|AMKComboSet}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-and-Megatron-Combo-Set-(Hasbro-Edition).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1d1|'''Megatron and Optimus Prime Combo Set''' (2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Energy Mace, Light Sword, Laser Pistol, Two display stands (Teletraan-1 Backdrop, Ark Backdrop)

:The "Hasbro Edition" of the AMK Pro Optimus Prime kit is also sold as a two-pack with the same line's Megatron. The 2-pack also comes with a unique pin.

{{-}}{{anchor|AMKClear}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Clear Color)''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released exclusively for the Cybertron Con 2024 in Shanghai, this Optimus Prime is a translucent redeco of the AMK Pro kit.

{{comingsoontoy}}
{{-}}{{anchor|2025AMK}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK, 2025)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Matrix of Leadership]]

:This AMK Optimus Prime only comes with his Ion Blaster and the Matrix of Leadership. In addition, He also features cartoon-accurate deco.

{{comingsoontoy|June 2025 release}}
{{-}}

===AMK Mini Series===
[[File:TF-Yolopark-AMK-Mini-Series-Optimus-Prime.jpg|thumb|upright=1.66|Swap my right arm with Megatron's so I could go to the offensive!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': 2 additional pairs of hands (Splayed, Pointing), [[Ion blaster]]

The ''AMK Mini Series'' Optimus Prime is a smaller version of the character, featuring swappable hand parts and his usual Ion Blaster.

:Initial images of the kit's hand-painted prototypes showed Prime utilizing a desaturated blue and red. His white parts are slightly darker, while his grill and abs are flat grey, and the chest windows are white. Unlike the prototype, the blue paint on the crotch is missing in the final product.

Optimus Prime is sold as either an individually marked single, a 2-pack with the same line's Megatron in a single box, or as a blind-box figure. This mold was also used to make [[Nemesis Prime (G1)|Nemesis Prime]] for the blind-box line, and [[Delta Magnus]] for the Agabyss-organized ''[[BotCon]] 2024'' exclusive House of Magnus BotCon VS Set.

{{-}}{{Anchor|AMKMiniIDW2005}}
<ul class="iconlist">{{Bp-a1|'''Orion Pax (IDW)''' (2025)}}</ul>

:This ''AMK Mini Series'' kit is based on Orion Pax's appearance in the 2005 ''IDW'' comics.

{{comingsoontoy}}
{{-}}

===BMK===
[[File:Yolopark-BMK-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Accessories'': [[Ion blaster]]

:The ''BMK'' (Which stands for "Beginner Model Kit") Optimus Prime is a larger version of the ''AMK Mini'', with the design being based on the ''AMK/Pro'' release. As with other ''BMK''s, Optimus features similarly basic articulation, consisting of a ball-jointed head, ball-jointed shoulders, single-axis 90-degree elbows, a rotating waist, and slightly swiveling ankles...that's it.

{{-}}

==Blokees==
===Galaxy Version===
{{anchor|Galaxy Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot/Decepticon insignias

:Released in the first wave of ''Galaxy Version'' line of blind boxes, [[Blokees]] Optimus Prime is a roughly 4-inch tall, highly-articulated, and non-transforming snap-on model kit of the Autobot leader. He is built on a "Standard Body" skeleton shared with other Blokees figures in the line, but with different body pieces to make them distinct. As advertised in the box, Prime has a pull rate of 1 in every 12 boxes, or three times across four cases.

:Prime comes with a pair of closed and open hands, along with a left hand molded in a pointing position exclusive to this figure. He also comes with his trademark Ion Blaster and Energon axe weapons—the former can be plugged into the closed hands, and the latter can be plugged into either wrist. The barrel of the Ion Blaster is compatible with the blast effects included with Ironhide, Megatron, and Skywarp. He also has a stand with four studs on top, which he can plug into and connect to similar stands. Optimus can also accommodate the jetpack included with Sideswipe, which was released as part of the ''Shining Version'' lineup.

:If one chooses, Prime's inner shoulder parts and elbow joints can be swapped with the red-colored pieces from the same lineup to create a more cartoon-accurate coloration.

:His body parts are redecoed to make ''Galaxy Version'' [[Optimus Prime (SG)#Blokees|Shattered Glass Optimus Prime (IDW)]], [[Ultra Magnus (G1)/merchandise#Blokees|Ultra Magnus (DW)]], and [[Nemesis Prime (G1)#Blokees|Nemesis Prime]].

{{-}}{{anchor|BlokeesMetallic}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot and Decepticon insignias

:The chase figure of ''Galaxy Version'' 01, with a much slimmer pull rate of 1 in every 36 boxes, i.e. once in four cases. Prime is redecoed in a metallic sheen, save for the joint pieces along with more show-accurate deco on the crotch, thighs, back, and shins. He comes with the same accessories as his regular counterpart.

{{-}}
{{anchor|BlokeesPink}}
[[File:Blokees Cybertron Con 2024 Pink OP.jpg|thumb|upright=1.4|Not the kind of [[fandom:gundam:Trans-Am_System|Trans Am]] you'd expect Optimus Prime to turn into.]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Pink)''' (Galaxy Version, 2024)}}</ul>
:*''Accessories:'' Pair of open hands, one pointing left hand, Energon Axe, Ion Blaster, Matrix of Leadership with support stand

:Released exclusively for the Cybertron Con 2024 event, this Optimus Prime kit is sold as a pre-assembled redeco of the first Galaxy/Shining Version kit, featuring opaque and translucent <s>[[energon]]</s> pink livery, and omits the light-up feature. He comes with all weapons and hand accessories from the original Galaxy Version release and the Matrix/support stand from the Shining Version.

:This Optimus Prime is limited to 999 units, with 400...no, 100<ref>{{citesocial|quote=Dear Fans, We sincerely regret to inform you that the on-site sales of the exclusive item - Optimus Prime (Pink) at the 2024 Transformers Cybertron Con have been temporarily canceled. We apologize for any inconvenience this may cause! As of today (December 6), we have sold 100 units, 300 remaining units would be sold through other sales channels, please stay tuned for our further announcements. Thank you for your understanding and support!|link=https://twitter.com/BlokeesOfficial/status/1864925074991780214|name=BLOKEES.OFFICIAL|site=Site Formerly Known as Twitter|year=2024|month=12|day=06}}</ref> sold at the convention, and the rest distributed through online and physical stores across mainland China.

{{-}}{{anchor|GVParallelUniverse}}
[[File:Blokees-TF-Galaxy-Version-06-IDW-Optimus-Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The sixth wave of the ''Galaxy Version'' blind boxes features an Optimus Prime based on his design and coloration from the IDW story [[The Transformers: Stormbringer|''Stormbringer'']]. In addition to the new hand runner introduced in the 4th wave, Optimus comes with his twin cannons and blaster accessory, complete with its blast effect. Like the other ''Galaxy Version'' kits since Wave 5, Optimus features a slightly upgraded suite of standard body parts, notably the sturdier pre-assembled hinge joints and the multi-colored head piece with color-coded eyes.

:As advertised in the box, he has a pull rate of 1 in every 12 boxes.

{{-}}
[[File:Blokees-TF-GV-06-Hidden-Orion-Pax.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The chase figure of ''Galaxy Version'' 06, with 1:36 odds, this Optimus Prime (now called "Orion Pax") kit is a redeco of the kit above, representing the force field-equipped coloration activated by Trailbreaker in "[[Elegant Chaos Part 1: All Our Parlous Yesterdays]]".

{{-}}{{anchor|BlokeesIDWTrans}}
<ul class="iconlist">{{Bp-a1|'''IDW-Optimus Prime (Transparent Edition)''' (2025)}}</ul>
:*''Accessories:'' Pair of open hands, pair of wrist blasters, Ion Blaster

:A translucent redeco of ''GV 06'' Optimus Prime with an iridescent finish, coming pre-assembled in blister packaging. This figure had a run of 999 units, with the first 61 distributed at an event in Chengdu Station, China on June 1, 2025.

{{-}}{{anchor|GV08}}
[[File:Blokees-TF-GV08-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster

:The eighth wave of the ''Galaxy Version'' blind boxes features another new mold of Optimus Prime in a Generation 1-inspired look, but with a new set of outward forearm armor, and he only comes with his Ion Blaster. In addition to the ball-jointed waist from the previous entry, Optimus also features updated articulation, including a slide-down hip joint axis, rotating upper thigh joints, and improved double-jointed knee articulation, similar to his wave mates. This Optimus can also accommodate Sideswipe's backpack from the ''Shining Version'' line.

:Because the newly designed knee joints are made to fit the narrow gaps in the thighs and lower legs, they are incompatible with joints from previous releases, including those used for the elbows.

:If one chooses, Optimus' forearm armors can be omitted for greater accuracy.

:Along with the rest of the wavemates, Optimus is first revealed at Blokees' booth at the IBTE 2025 (Indonesia International Baby Products & Toys Expo) event.

{{-}}{{anchor|GV08Hidden}}
[[File:Blokees-TF-GV08-Optimus-Prime-Hidden.jpg|thumb|250px|Thanks for helping me... pull myself together...''I guess.'']]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hidden Style)''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, half-dead chest plate, metal splinter

:The chase figure of ''Galaxy Version'' 08, with the standard chase odds of 1 in every 36 boxes, this kit of Optimus Prime is a redeco of the regular kit above in metallic paint and molded plastic, featuring a "half-alive, half-dead" appearance. In addition to his identical accessories, Prime features an alternate front chest block with a gash that is compatible with the included metal splinter (referred to as an "Energon Axe"...okay.).

{{-}}
<ul class="iconlist">{{Bp-a1|'''Metroplex''' (Galaxy Version, 2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''

:The ''Galaxy Version'' Metroplex kit comes with a non-poseable figurine (and obviously out of scale) of Optimus Prime, and he can be pegged onto one of his open-palm hands. As he was molded from merely dark gray plastic, he can be painted in full color (or onto any of the other characters that share his appearance) if you wish.

{{-}}

===Shining Version===
{{Anchor|Shining Version}}
[[File:Blokees-TF-Shining-Version-01-Shining-Roll-Out-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 01 - Shining Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (weapon-holding, splayed), ion blaster, Energon Axe, Matrix of Leadership with support stand, holdable Autobot and Decepticon insignias

:Released in the first wave of Blokees' ''Shining Version'' line, this version of the ''Galaxy Version'' Optimus kit now features painted translucent face and chest parts, and a torso frame that lights up upon shaking (or at least just lightly tap some areas on the torso), causing the eyes and the Matrix pattern tampographed on his chest window to glow for a limited time. In addition to his identical accessories from the Galaxy Version release, Optimus also comes with a single Energon Cube, a separate Matrix with a support stand, and a new, larger figure stand.

:The Matrix features a pair of tabs on each handle, compatible with most ''Galaxy/Shining Version'' kits that include open-palm hands, not just Prime.
{{-}}{{anchor|BlokeesG1Toy}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:The second wave of the ''Shining Version'' series introduced a second Optimus Prime mold styled after his [[Optimus Prime (G1)/toys#The Transformers|original Generation 1 toy]], complete with an ion blaster modeled after it. As with the first ''Galaxy Version'' kit, this Optimus can accommodate Sideswipe's backpack from the ''Shining Version'' line.

{{-}}{{anchor|BlokeesG1ToyMetallic}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (Shining Version, 2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:This chase variant of the above toy-style mold is, like the ''Galaxy Version'', redecoed into metallic colors along with more toy-accurate tampographs and retains the same accessories. The eye and window pieces are now molded with orange-ish red translucent plastic instead of blue.

{{-}}{{anchor|ShiningPax}}
[[File:Blokees-TF-Shining-Version-03-Orion-Pax.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' ([[2025]])}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' 2 pairs of hands (fists/accessory-holding, splayed open-palm), Gun, figure stand

:The third wave of the ''Shining Version'' series introduced a new mold styled after his Orion Pax appearance in ''IDW Publishing'''s "Spotlight Orion Pax" comic. As with later Galaxy Version kits since Wave 5, Orion features sturdier pre-assembled hinge joints.

:Since Orion's chin is slightly too long, fully inserting the ball joint may cause his head to ''slightly'' look upwards. To prevent this, insert the ball joint into Orion's head socket first, and then attach it to the torso frame's peg hole until you feel the friction between the joint and the hole without fully inserting it.

:If you're a speed builder, be mindful when attaching the pre-assembled joints; Unlike the symmetrical joints from earlier waves, the pegs on both ends of these joints are designed to connect to specific pieces; The tabs with slightly smaller holes are intended for the upper arms and thighs, while the regular tabs are meant for the forearms and lower legs. While an incorrect knee joint assembly may cause it to very slightly lean when standing straight or in an A-stance, an incorrect elbow assembly won't be noticeably affected unless you're looking very closely.

{{-}}

===Box Sets===
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Exclusive-Yearly-Version).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon''' (2024)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, Energon Axe, Matrix of Leadership with support stand, figure stand, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:This special edition box set included [[Electrum]]-inspired gold redecoes of ''Shining Version'' (See above) Optimus Prime as well as [[Prowl (G1)/toys#Exclusive Yearly Version|Prowl]], [[Ironhide (G1)/toys#Exclusive Yearly Version|Ironhide]], [[Long Haul (G1)/toys#Exclusive Yearly Version|Long Haul]], and [[Starscream (G1)/merchandise#Exclusive Yearly Version|Starscream]], where they also receive translucent redecoes of face and chest parts painted on.

:As with the rest of his pack-in mates in this set, Optimus suffers from a case of [[Gold Plastic Syndrome]], as his molded gold hinge joints can potentially snap off due to the swirly plastic.

{{-}}
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Yearly-Version-Set-2-Optimus-Prime-(G1-Toy).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon - Defence''' (2025)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, figure stand, blast effect, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:The 2025 Yearly Version box set now features an Electrum-inspired redeco of the toy-based ''Shining Version'' Optimus Prime kit. In addition to the identical accessories, he also comes with two additional impact effects for the figure stand.

:Like the rest of this box set's kits, Optimus' hinge joints are now molded in a more mustard yellow-ish plastic, reducing the Gold Plastic Syndrome-related issue plagued from the previous release.

{{-}}

===Action Edition===
[[File:Blokees-TF-Action-Edition-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Action Edition, 2024)}}</ul>
:*Accessories: Ion Blaster, Energon-Axe, Jetpack, Wrist Communicator, Holomatter avatar, Matrix of Leadership, Index finger parts (Fist, Pointing, Trigger-finger), display stand with magnet-powered faction symbol block

:The "Action Edition" Optimus Prime is a 7-inch (approx 18cm) model kit with a slightly more complex build and features an inner frame (equivalent to the ones used for ''Bandai'''s "Master/Perfect/Real Grade" kits) with greater articulation points than his other ''Galaxy Version'' toys. In addition to his two signature weapons, the removable Matrix of Leadership, and the jetpack, Optimus also comes with a hologram readout and wrist comm pieces to attach to the left forearm, with each of those parts featuring two different types of stickers. The articulated hands also feature two additional index fingers, a straight pointing piece, and a slightly curved piece for the Ion Blaster's trigger. A magnetic component in his display stand's faction symbol activates the light-up features that illuminate his eyes and the Matrix. An additional sticker sheet and extra yellow-colored eye parts can be used to create a toy-accurate version of this kit.

:If one chooses, the middle-to-pinky fingers ''can'' be (carefully) sliced into individual pieces as they also feature individual ball joints for each finger.

{{-}}

===Defender Version===
{{Note|Every case before the 5th wave comes with a random Commemorative Card, with 10 Common, 1 Gold, and 1 Silver for each out of every 12 cards.}}
{{anchor|DefenderTruck}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-truck.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Vehicle''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''

:Released as part of the first ''Defender Version'' line of blind boxes, this ''Blokees'' kit of Optimus Prime is molded in his truck mode. The trailer hitch also comes with the Auto-Launcher from the Combat Deck, where it can be extended and wielded by other figures from the same line, allowing them to ride Optimus like an adorable little scooter. The Auto-Launcher can be detached from the bar, allowing the figure to be displayed as a regular-looking truck.

:The Combat Deck/Trailer and the Roller from the 5th wave can accommodate this kit, with the Auto-Launcher able to be mounted inside the trailer.

:This mold was also used to make [[Optimus_Prime_(SG)#SGDefenderVehicle|his Shattered Glass counterpart]].

{{-}}{{anchor|DefenderRobot}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-robot.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:This ''Defender Version'' kit of Optimus Prime is a 2.2-inch (5.5cm) figure, a few inches smaller than the ''Galaxy Version'' kits, but still articulated. Unlike his ''Galaxy Version'' kit, Optimus only comes with an Ion Blaster.

:Like most of the larger Galaxy Version kits, Optimus features a simple neck joint that is colored to match his optics, allowing it to be see-through from his head's eye holes. This mold was also used to make [[Ultra_Magnus_(G1)/merchandise#Defender_Version|Ultra Magnus]] and [[Optimus_Prime_(SG)#Defender_Version|Prime's Shattered Glass counterpart]].

{{-}}{{Anchor|SpecialGalaxyType}}
[[File:Blokees-TF-Defender-Ver-01-Special-Galaxy-Type-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Special Galaxy Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:One of the four chase figures of the line, the "Special Galaxy Type" Optimus Prime is a metallic redeco of the figure above, and he also features additional details to make him more accurate to the show. One chase variant is guaranteed per case, meaning this Optimus appears in five out of every twelve cases.

{{-}}{{Anchor|SpecialArmorType}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-100%-Firepower.jpg|thumb|250px|All of these armaments and yet he insists on crippling the 'Cons' joints without destroying them.]]
<ul class="iconlist">{{Bp-a1|'''Special Armor Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster, Forearm cannon, Wing pack

:The "Special Armor Type" version of the Optimus Prime kit is an alternate version of the Special Galaxy Type chase figure, decked out in metallic paint, and comes with additional armaments such as the forearm cannon and a wing pack that is based on the one used by his ''Cybertron'' namesake. Unlike the chase variant above, this Optimus has an '''''even''''' slimmer pull rate of '''1''' in every 144 boxes, or once per twelve cases.

{{-}}{{anchor|DV05Brilliant}}
[[File:Blokees-TF-DV05-SG-Brilliant-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Brilliant Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 05 - Traitor to Tyranny'''
:*''Accessories'': Energon Axe

:The fifth wave for the Defender Version kit comes with a translucent redeco of Optimus Prime, whose Ion Blaster is replaced with an Energon Axe. Additionally, he comes with one of the three random plastic commemorative coins (featuring etchings of Jetfire's head, Galvatron's head, and Jetfire's vehicle mode) in every case that contains the kit. Each coin is molded from translucent plastic and features a gradient pattern painted with gold.

:As with other clear-colored Brilliant/Glittering kits, the translucent plastic-molded ball-and-socket joints tend to be somewhat loose even when it's built out of the box, compared to the opaque and metallic kits.

{{-}}
===Blokees Wheels===
{{Note| Due to licensing-related reasons, this blind-box line was not released in the US market.}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''

:This 1/64-scale vehicle kit of Optimus Prime's truck mode is part of the new ''Blokees Wheels'' series of blind-boxed ''Transformers'' products. The design is based on Don Figueroa's interpretation of the character's Cybertronian truck mode, as seen in IDW's 2009 -2011 ongoing series. The kit also features PVC tires and an "innovative high-density" ABS material for the car shells. Additionally, Optimus Prime features a universal Chassis Connector, which is used by all vehicle mode kits in the lineup.

:This Optimus Prime has a pull rate of 1/24.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hologram Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with a slim pull rate of 5/144, the "Hologram Edition" Optimus Prime is a translucent redeco of the kit above. It includes an additional translucent blue driver minifigure, which is also designed to fit in the other vehicle kits with open seats.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Titanium Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with the slimmest pull rate of 1/144, the "Titanium Edition" Optimus Prime is a metallic redeco of the original kit, and he comes with the same driver figure form the Hologram Edition release of the kit.

{{--}}

==Combot==
[[File:Unix-Square-Combot-Optimus-Prime.jpg|thumb|300px|Autobots, Transf-I mean, Partsform and roll out!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories:'' 5 pairs of hands, Ion Blaster, Energon Axe, Energon Sword/Blaster Bayonet, Vehicle mode frame

:Produced by [[Unix Square]], a toy company based in Hong Kong, [[Combot]] Optimus Prime is an action figure approximately the size of a Voyager Class figure, and he features an impressive 50 points of articulation and includes a hefty amount of die-cast metal for a weighty premium feel, and light-up features for both the eyes and the Matrix of Leadership. In addition to his iconic Ion Blaster, Optimus also comes with a handheld Energon Axe and a live-action movie-inspired Energon Sword. The sword can also combine with the Ion Blaster to create a Bayonet.

:As the LED unit is wired on the neck, Optimus's head cannot swivel in a full 360 degrees.

:Unlike most non-Hasbro/Takara merchandise of the character on this page, Combot Optimus Prime can transform—albeit loosely defined due to licensing restrictions—into a stylized cab-over using full partsforming, while requiring the included vehicle mode frame.

{{-}}

==Auldey==
{{Note|All releases come with their respective trading cards.}}
[[File:Auldey-TF-AAE-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-001'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Optimus Prime is a 5-inch non-transforming but highly articulated action figure, and he comes with his additional pairs of hands and his signature ion blaster. Prime also features a removable chest window piece, which reveals an empty cavity for a future Matrix of Leadership accessory.

:As advertised in the box, the lineup had an 11/70 probability of getting Prime. This mold was also used to make [[Nemesis Prime (G1)#Auldey|Nemesis Prime]].

{{-}}{{anchor|auldeymetallic}}
[[File:Auldey-TF-AAE-Optimus-Prime-(Metallic).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Metallic Color)''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-000'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:The chase figure of the first lineup with a much slimmer 1/72 probability, this Optimus Prime is a redeco and retool of the figure above, featuring a toy-based deco and parts such as the head and legs. In addition, Prime also comes with a sheet of customer-applied stickers to complete the rest of his toy-accurate details, which include the chrome yellow-gold areas on his front hip.

{{-}}{{anchor|auldeyoptimal}}
[[File:Auldey-TF-AAE-Select-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Optimal Set''' (Alpha Action Elite Select, 2025)}}</ul>
:*''ID Number'': '''AAE-S 001'''
:*''Accessories:'' 16 pairs of hands, Ion Blaster, Energon Axe, Matrix of Leadership, Jet pack (with Blast effects), 2 pairs of alternate communication panels, display stand
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of Auldey's non-blindboxed "''Alpha Action Elite Select (AAE-S)''", a subline that also features re-releases of previous figures with more accessories and premium details, ''AAE-S'' Optimus Prime is a redeco and retool of the original AAE blindboxed figure. Deco-wise, Optimus features metallic paint on the red and blue plastic, along with some metallic silver details. He also comes with additional accessories, such as the Energon Axe, Megatron's pistol form, a jetpack with two Blast effects (also compatible with the Ion Blaster), an additional pair of interchangeable communication panels, and four extra pairs of hands that need trimming from their runners. Additionally, Optimus includes retooled areas and newly molded parts, such as a new neck joint that allows him to look up further, an opening chest window that grants access to his Matrix Chamber, and a display stand with an adjustable posing arm that plugs into multiple holes on his back and the soles of his feet for midair action poses.

:Optimus is also compatible with the Seeker-based back and the head from the same entry's Starscream, recreating the latter's disguise in [[Megatron's Master Plan, Part 1]].

{{--}}

==Ty==
* '''Beanie Bouncer Optimus Prime ''' (2025)
[[File:Bouncer-op.jpg|thumb|200px|If we want to get technical, this is actually [[Diac]].]]

:A bouncing ball covered in fur produced by Ty, creator of the more famous Beanie Babies and Beanie Boos. Optimus Prime's head crests are represented by additoinal pieces of felt material coming out of the ball. Opposite the face is an autobot symbol.

:Opitmus Prime is also available in a three set alongside Megatron and Bumblebee.

==References==
{{reflist}}
{{-}}
[[Category:Attacktix]]
[[Category:Combiners]]
[[Category:Decoys]]
[[Category:Generation 1 Autobots]]
[[Category:MyClone]]
[[Category:Robot Heroes]]
[[Category:Titanium Series]]
[[Category:Bitfig]]
[[Category:ULTIMATES!]]
[[Category:Transformers Character Card Autobots]]

Optimus Prime (G1)/merchandise

2025-10-27T17:02:06Z

Leia G: Added Beanie Bouncer Optimus

{{suite}}

'''Optimus Prime''' is a bit of a shill.
==Stamp Bot==
[[File:OptimusPrime-StampBot-1984.JPG|thumb|Truck stamp is cool!]]
*'''Optimus Prime''' (1984)
:Made by [[HG Toys]], Stamp Bot Optimus Prime is a small, non-poseable figurine of Optimus Prime based on his toy with a rubber stamp on the base, and a cap with a felt "floor" that was soaked in ink. The stamp made an image of Optimus Prime's cab mode.
{{-}}

==The Transformers Cookie Jar==
*'''The Transformers Cookie Jar''' (1984?)
:A ceramic cookie jar in the likeness of Optimus Prime's head. The top of Prime's head lifts off for the storage of delicious baked goods or Energon or what-have-you. The cookie jar was manufactured by [[Great American Housewares]] under license from [[Hasbro]].
::*''[http://www.tfw2005.com/boards/transformers-toy-discussion/179468-optimus-prime-cookie-jar-price-check.html Images of The Transformers Cookie Jar at TFW2005]''
{{-}}

==Collegeville Costumes==
{{anchor|CollegevilleG1}}
*'''Optimus Prime''' (1984)
:Although [[Collegeville Costumes]] only released a small number of Transformers [[Halloween]] costumes, and made some odd choices for characters to depict in the process, Optimus Prime was an obvious choice as one of their first releases. The costume consists of a thin plastic facemask based directly on the Optimus toy's head complete with yellow eyes, and an orange and yellow plastic smock decorated not with the details of Optimus' body, but with his package art and the Transformers logo.

*'''Optimus Prime''' (1993)
{{anchor|CollegevilleG2}}
:Optimus Prime recieved a second costume from Collegeville for their line of ''[[Transformers: Generation 2 (franchise)|Transformers: Generation 2]]'' line. As with the 1984 Collegeville costume, it consists of a thin plastic mask held on by elastic. Unlike the previous costume, the plastic smock is now decorated with the details of Optimus' G2 body, as well as having his name and the G2 logo on it.
{{-}}

==Vehicle Play Tent==
[[File:Vehicleplaytent.jpg|thumb|Both a big truck ''and'' a series of tubes.]]
*'''ERO''' (1984?)
:The Vehicle Play Tent was part of the deluge of Transformers merchandise in the 80s. The tent was constructed by means of a series of plastic tubes that fit into sockets on corner pieces (similar to the "k'nex" building system that arrived a few years later), then a vinyl cover was slipped over this PVC skeleton to make the tent.
{{-}}

==Oral Care Station==
*'''Optimus Prime Oral Care Station''' (1984/85?)
:An electric toothbrush in the likeness of Optimus Prime. A battery-operated feature causes the toothbrush (attached at Prime's left wrist) to move back and forth. The set also included a cup for [[water]], an extra brush head, and a stand to hold the various accoutrements.
::*''[https://www.flickr.com/photos/14985789@N07/3207711517/?rb=1 Image at Flickr.com]
::*''[http://fredsworkshop.com/oral.html Images of the Oral Care Station in-box at FredsWorkshop.com]''
{{-}}

==Transformers Milk Caramel==
[[File:Tfcaramel optimus prime.jpg|thumb|upright=1.66|Note: Do not eat! ... the candy. The toys taste better.]]
*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A small soft-rubber figurine (known as a ''keshigomu'' in Japan) of Optimus Prime was released as part of [[Kabaya]]'s line of ''[[Transformers Milk Caramel]]'' [[candy toy]]s. Like all the figures from the 1985 range, Prime came blindpacked, and was available in a variety of colors including white, blue, yellow, green and orange. As the name of the series suggests, he came with a piece of caramel candy.

*'''Convoy''' (1985)
**''ID number:'' '''1'''
:A second Optimus Prime ''keshigomu'' was included in the second wave of ''Milk Caramel'' figures, sporting some broader proportions and more toy-based design cues like visible wheels, holding its gun in its left hand, rather than its right. This figure was available in red, yellow and blue variations; a baffling variant is known to exist with a ''Decepticon'' symbol on its left shoulder!

*'''Convoy''' (1985)
**''ID number:'' '''2'''
:The second ''Milk Caramel'' wave also contained a third Optimus Prime figure, largely identical to the second, except with its gun in its right hand, and holding its left arm aloft. Again, this figure was available in red, yellow and blue variations.
{{-}}

==Transformers Choco==
[[File:Tfchoco optimusprime.jpg|thumb]]
*'''Convoy''' (1985)
:A small solid-color snap-together model kit of Optimus Prime was released by Kabaya as part of their ''[[Transformers Choco]]'' line, coming packaged with small chocolate candies similar to [[M&M's]] called "Chocolate Dots". The kit can transform from robot to vehicle mode, though this version of Prime doesn't have any hands.

*'''Convoy''' (1985)
**''Accessories:'' Two fists
:A second ''Choco'' version of Prime was upsized from the first a little, and was given a pair of removable fists, the right one clutching Prime's [[ion blaster]].
{{-}}

==Transformers Gum==
[[File:Tfgum optimusprime.jpg|thumb|upright=1.66]]
*'''Convoy''' (1985, 1997)
**''Accessories:'' Two fists, ion blaster
:In addition to the small ''Choco'' model kit, Kabaya also released a larger version of Prime under their ''[[Transformers Gum]]'' line. Essentially a downsized version of the original Prime toy (sans trailer), the kit is sculpted from black, red, and grey plastic, features stickers rather than paint applications for details, and came with a stick of gum.

:This kit was reissued in 1997 by might-or-might-not-be official Transformers licensee [[ToonTown]] in [[South Korea]] (possibly, in a 2-pack with a reissue of ''Transformers Gum'' [[Soundwave (G1)/merchandise#Transformers Gum|Soundwave]] <ref>[http://fuwakudou.web.fc2.com/prisoners06.html One source] mentions obtaining two boxes of the ToonTown ''Transformers Gum'' releases with each containing two kits - the one numbered #1 featuring Optimus Prime and Soundwave and the one numbered #2 featuring Sideswipe and Starscream - but considering that none of the other (albeit admittedly very few) sources that discuss these kits mention a similar arrangement, it is possible that this was either a packing mistake or simply already-opened boxes being sold on the secondary market with two loose kits stuffed into them (the article does not specify whether or not the boxes they obtained were sealed, although they do look new-ish in the provided pictures). Still, considering how very little information exists regarding these releases in general, it will nonetheless be noted here that these kits ''might'' have been released as 2-packs at some point.</ref>), looking mostly identical save for a set of cheaper-looking paper decals.
{{-}}

[[File:Tfgum2010 g1prime.jpg|thumb|upright=1.66|My limbs need to be horribly mutilated and rearranged to change forms!]]
*'''Convoy''' (2010)
**''Accessories:'' Ion blaster
:The first wave of 2010's revival of the ''Transformers Gum'' series served up a double dose of Prime, beginning with this new model kit of the original Generation 1 version of the character. Sculpted from white, red, and blue plastic, the kit features a positively ''ungodly'' amount of stickers to make it look presentable and comes with Prime's traditional ion blaster weapon, which stores on the rear of his cab in vehicle mode.

:In terms of transformation, Convoy partially [[partformer|partforms]], as the forearms are needed to be removed and attach it back during conversion.
{{-}}

[[File:Tfgum2010 henkei prime.jpg|thumb|upright=1.66|So do mine!]]
*'''Convoy''' (2010)
**''Accessories:'' Smokestacks/laser cannon
{{toydesigner|[[Naoto Tsushima]] (packaging artist)}}

:The second Prime figure in the 2010 ''Gum'' line was this kit of his ''[[Transformers: Classics|Classics]]''/''[[Henkei! Henkei! Transformers (franchise)|Henkei! Henkei!]]'' body. As with the Generation 1 model, this figure is made from white, red and blue plastic and uses ''lots'' of stickers. It comes with the ''Classics''' figure's transforming smokestack/laser cannon weapon.

:Much like his aforementioned G1 self, his arms also need to be partformed into robot mode.
{{-}}

[[File:Tfgum2014_g1starconvoy.jpg|thumb|upright=1.66|But not mine!]]
*'''Star Convoy''' (2014)
**''Accessories:'' Cannon, Roller/ treads, car mode Hot Rodimus

:Released as part of the 8th wave of Kabaya's 2009 series of standard model kits, Star Convoy is a snap-together model kit that can transform into a futuristic big rig. Like the full-sized Star Convoy toy, this model kit can assume a battle station mode and also includes a diminutive and non-transformable Hot Rodimus in car mode that can interact with the base mode ramps. Like most other Kabaya model kits, Star Convoy has no paint applications and relies on stickers for added details.

:Owing to the original toy's simple engineering, Star Convoy does not require any disassembly to transform into robot mode, making him one of the few non-partforming Kabaya figures. He does, however, need to have his Microcarrier wheel base detached (which was also an option on the original toy) to fully access a significant improvement over his older self: some newly-added leg articulation! The Microcarrier also doubles as a shield that can be attached to the robot's left arm.
{{-}}

==Hero Set==
*'''Convoy''' (1985)
**''ID number:'' '''01'''
**''Accessories:'' Laser rifle
:A large ''keshigomu'' of Optimus Prime was produced by TakaraTomy licensee [[Maruka Toys]]. Packaged on a blister card, the static, unposeable Prime figure came with a removable laser rifle, and featured a few small stickers for colour and detail. Maruka also produced a Megatron figure in the same scale, and both Prime and he were available in red, yellow or green.
{{-}}

==Decoy==
[[File:Decoy optimus prime.jpg|thumb]]
*'''Cybertron Hero Collection 22''' (multi-pack, 1986)
*'''Defeat Trypticon Strategy Game''' (board game, 1986)
:Optimus Prime was among the many characters rendered by [[TakaraTomy|Takara]] as part of their series of 1.5" ''keshigomu'' figurines. Like all the Autobots in the series, Prime was molded in soft red rubber, and featured a number sculpted into his back that was the sum total of his [[Tech Spec]]s, for use in the various games that could be played with the figurines. Prime was available as part of a 22-piece box set of Autobot figures, as a playing piece in the Defeat Trypticon Strategy Game, and later, in a peach coloration randomly packed as part of various other box sets.

*'''Optimus Prime''' (1987)
**''Checklist number:'' '''31'''
:The Prime figurine was later brought over to [[Hasbro]] markets as part of the "[[Decoy (G1)|Decoy]]" promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (31, in Prime's case). Like all Autobot Decoys, he was a randomly-chosen pack-in available with the carded [[Throttlebot]]s, [[Aerialbot (G1)|Aerialbots]], [[Protectobot (G1)|Protectobots]] and [[Technobot (G1)|Technobots]].

::*''[http://www.tfu.info/1986/Autobot/Decoys/OptimusPrime/optimusprime.htm More information on Decoy Optimus Prime at TFU.info]''
{{-}}

==Knitting Pattern==
[[File:Transformers-knitting-pattern.JPG|thumb|Here to transform your sweater into something that will get your ass kicked.]]
*'''Wendy DK 3015''' (1986)
: Produced by U.K. company [[Wendy DK]] and designed by [[Joy Gammon]], this pamphlet contained patterns for two ''Transformers''-themed sweaters, one featuring Optimus Prime in robot mode, one featuring Optimus Prime in vehicle mode. The patterns were sized as Children's Large, so you're going to have to upscale it quite a bit if you want your <s>girlfriend</s> mom to knit you one.
{{-}}

==Vinyl figurine==
[[File:Optimus Prime Vinyl Figure set.jpg|thumb|upright=1.66|Vinyl Prime leads his decoys into battle [[Action Master|before the great storm]].]]
*'''Scramble Gun Set''' (1986)
**''Japanese ID number:'' '''Part.1'''
:Optimus Prime was one of several characters released by [[Seven]] and Takara as large vinyl figurines in a variety of different novelty sets. Prime came packaged with a roleplay pistol (the titular "Scramble Gun"), an Autobot badge, and four randomly assigned peach-colored decoy figures. In [[Ultra Magnus (G1)/merchandise#Vinyl figurine|"Part.2"]] of the set Prime is replaced by a vinyl Ultra Magnus.{{-}}

==Gold Convoy Trophy==
[[File:Gold Convoy Trophy.jpg|thumb|Thou will worship this golden convoy. Or Perish!]]
*'''Optimus Prime''' (trophy, 1988)
:A gold chrome trophy in the likeness of Optimus Prime was given as an award to an unknown number of distinguished [[TakaraTomy|Takara]] employees and as a [[Lucky Draw figure|Lucky Draw]] (alongside the [[Chromedome (G1)|Silver Chromedome Trophy]]) in [[TV Magazine]] in 1988. The two different releases have different plaques but appear to be otherwise identical. If you're an Optimus Prime merchandise completist, good bloody luck finding this one.
{{-}}

==''Generation 2''==
*'''Optimus Prime''' (Dairy Queen promotion, 1994)
[[File:DairyQueen Optimus.jpg|thumb|Rare, in a raw chicken sort of way.]]
:Released in Dairy Queen's 'Kid's Pick-Nic!' meals in 1994, this hunk of red and blue plastic is the first known Optimus Prime kids' meal toy and also probably the worst, sporting no transformation and zero articulation of any sort, with an included sticker sheet for detailing that doesn't particularly resemble any iteration of the character.

:These can be pretty hard to find, owing to their limited distribution compared to the average fast food promotion. Being pretty forgettable as toys probably didn't help either, if we're being honest.
{{-}}

*'''Optimus Prime Inflatable Bop Bag'''
[[File:OptimusPrime_G2_Inflatable_Bop_Bag.jpg|thumb|At last, merchandise for Decepticons!]]
:Released in 1993 by Kid Dimension, a subsidiary of Hasbro,<ref>[http://www.fundinguniverse.com/company-histories/hasbro-inc-history/]</ref> this 3 foot tall Inflatable Bop Bag featured the likeness of Optimus Prime above the Transformers Generation 2 logo. Supposedly to encourage kids to punch out Optimus Prime?
{{-}}

===ToonTown===
{{note|There's a longstanding debate on whether the obscure Korean-exclusive [[ToonTown]] figures and merchandise, allegedly released under official Hasbro licensing according to their packaging, are actually legitimate Transformers products or just bootlegs with fraudulent copyright information. Although there isn't a clear consensus from collectors and no statement from Hasbro on this matter as of {{CURRENTYEAR}}, we have nonetheless chosen to cover them here for the sake of archival and posterity.}}

[[File:Midam-Prime.jpg|thumb|upright=1.66|Maybe a licensed product, maybe a bootleg. Maybe it's in our definition of "toy," maybe it's "merchandise." ToonTown needs a {{w|Eddie Valiant|detective}}!]]
{{anchor|MidamIndustry}}
<ul class="iconlist">{{Bp-a2|'''Optimus Prime''' (Model kit, 1997)}}</ul>
:*''Accessories'': Blaster, left & right fists
: Notoriously odd [[South Korea]]n company ToonTown licensed the ''Transformers'' brand to model kit manufacturer [[ToonTown#Items released by Midam Industry|Midam Industry]], which in turn put out this surprisingly detailed and robust kit of the original Generation 1 Optimus Prime figure. It is fully transformable and about 3/4ths the size of the original toy. He does not feature his trailer, and his weapon design is substantially different from either of his classic blasters.

: Three color morphs have been found so far: original red arms and torso with blue head and legs, a mirrored version with red head and legs and a blue torso and arms, and one with all the aforementioned parts in blue.<ref>Reviews for a [https://m.blog.naver.com/eoiipp/130144214329 "standard"-colored Midam Optimus kit], an [https://blog.naver.com/parang16/20041871808 "inverted"-colored Midam Optimus kit], and an [https://blog.naver.com/nckim/70101680088 all-blue-colored Midam Optimus kit] on blog.naver.com</ref> This suggests that the colors which make up the two batch of parts might be randomized between blue and red, and as such; an as-of-now undocumented all-red version might also exist. All of his versions also have their chrome parts painted in metallic gold, a common oddity across ToonTown Primes as seen in the previous LALA figure.

: The figure comes with a batch of rather weird stickers, with text on his license plate and the sides of his truck mode that refers to him as "[[gbwiki:Dump Robo|Dump Robo]]".
{{-}}

[[File:LALA-PrimePencilCase.jpg|upright=1.66|thumb|Pope Leo XIV might have been selected on the
day that this image was uploaded, but pencil case Optimus might be the holiest thing that I've seen all day, hahaha... I'm going to hell, aren't I?]]
*'''LALA Pencil Case''' (1997)
:Possibly one of the most majestically quirky pieces of merchandise to have graced any Transformers character ever, this incredible pencil case from ToonTown licensee [[ToonTown#Items released by LALA|LALA]] is generally based around the design and transformation of the original Generation 1 Optimus Prime toy, but with ''a lot'' more than meets the eye to it: on top of being fully transformable from his robot mode to (an albeit rather flat) truck mode, he folds open to reveal space for the storage of several pencils and/or pens of your choosing, as well as including printed stickers for a time table and an address book, a drawer for the storage of extra school supplies, and a hidden thermometer that's revealed by lowering his head!

:Pencils can be attached to his shoulders to imitate his smokestacks, and his fists, which are removable for the transformation like in the original toy? They're erasers! Gah, how can an obscure, maybe even potentially fake piece of merchandise from 1990s South Korea have this much soul and creativity put into it! The fists can even be stored below the truck's front portion in vehicle mode, guaranteeing that you never lose them.

:He also includes a sticker sheet and a small 20cm ruler, featuring packaging art of himself plus ''Generation 2'' [[Megatron (G1)|Megatron]], [[Sideswipe (G1)|Sideswipe]], and [[Ramjet (G1)|Ramjet]], as well as pictures of their respective LALA eraser versions (the one for Optimus coming right up).
{{-}}

*'''Eraser''' (1997)
:Another piece of merchandise from ToonTown licensee LALA, this eraser also doubles as a small simple model kit, with his large colored bits being the "eraser" portion and the remainder of the toy being constituted of grey plastic parts that are assembled together. He transforms from robot to vehicle and back by [[Partformer|partforming]] his individual components.

:Although the advertisements and aforementioned ruler (as well as the few copies that we know of) feature his eraser bits in pink, it is possible that he might have also been released in bright green, as other LILA erasers that also show up as pink in promotional images have been found with this color instead.
{{-}}
*'''Watch''' (1997)
:Yet another LALA product, this Optimus Prime watch "transforms" by folding out of its compressed half-form and standing up as a simple fully-fledged little robot. His chest opens to reveal the titular watch. Said chest, along with his head, have an unusual gold chrome deco (a commonality across a handful of ToonTown products), and the box art is painted accordingly to reflect this.
{{-}}

==''Metalforce''==
[[File:MetalforceConvoy.jpg|thumb|I'm expensive! ''(Metallic Version Pictured)'']]
*'''Convoy''' (1999/2000)
**''Japanese ID number:'' '''MFC-01'''
**''Accessories:'' Ion Blaster, Autobot Matrix of Leadership, alternate hand, unpainted rifle, Matrix, helmet and hand

:''Metalforce'' Convoy is a large vinyl figurine produced by [[Time House]] sculpted to very closely resemble Optimus Prime as he appeared in the original television series, and at the time was the most accurate product depiction of Optimus Prime's cartoon appearance.

:The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his [[Matrix of Leadership/toys|Matrix of Leadership]], as is a ''[[The Transformers: The Movie|Movie]]''-style Matrix cover (not pictured). He also comes with an alternate hand that allows him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands, and helmet, which probably meant for those who wanted to duplicate them with resin and/or wish to modify/paint them...you know how garage kit modellers do.

:Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colors of the actual series, and a metallic-paint version (pictured), which is less [[show-accuracy|show-accurate]] but more shiny. The plain-colors version was the first release and have an Autobot symbol tampograph on his shoulder as per [[The Transformers (cartoon)|the cartoon]], while the later metallic-finish version instead came with a decal sheet.

{{-}}

==''Choro-Q''==
*'''Convoy''' (2000)

:''[[Choro-Q]]'' Convoy is a [[redeco]] of the Domra Truck toy from Takara's ''Choro-Q'' toyline of non-transforming [[super deformed]] vehicles. He was an [[exclusive]] at [[BotCon]] Japan 2000, and features a [[pull-back motor]] and a rear license plate that reads "BotCon Japan 2000".

:Along with ''Choro-Q'' [[Mirage (G1)|Ligier]] and [[Megatron (G1)/toys|Megatron]], Convoy was given out randomly to convention attendees. Each toy was limited to 1000 pieces.

==Super Collection Figure==
[[File:SCF Optimus.jpg|upright=1.66|thumb|#IGotPrimeOnIt]]
*'''Convoy''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

: A three-inch tall [[plastic|PVC]] figurine of Optimus Prime was available as part of the first wave of [[TakaraTomy|Takara]]'s ''[[Heroes of Cybertron (toyline)|Super Collection Figure]]'' line. Like all the figures in the wave, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve [[blindpacking|blindpacked]] figures.

{{-}}{{anchor|SCFaxe}}
[[File:SCF Optimus chase axe.jpg|upright=1.66|thumb]]
*'''Convoy with Ax''' (2000)
**''Act'': '''1'''
**''Accessories'': Stand

:Also available in the first ''Super Collection Figure'' wave was a rare "Secret Figure" version of Optimus (斧付きコンボイ, ''ono-tsuki konboi''), decorated in metallic paint and replacing his gun-wielding right hand with his [[energon-axe]].

: It was ''presumably'' released at a ratio of one per every ten cases; while this has not been officially confirmed, later waves gave these odds for Secret Figures.

{{-}}{{anchor|SCFtrailer}}
[[File:SCF Optimus Truck.jpg|upright=1.66|thumb|We're just as confused as you are, folks.]]
*'''Convoy (Trailer Mode)''' (2000)
**''Act'': '''2'''

:Part of the second ''Super Collection Figure'' act, this is the only ''SCF'' figure of a vehicle mode Transformer. As with the previous non-chase Prime figure, it was available as both a standard full color figure and a clear plastic version, one of each of which was available in a standard case of twelve blindpacked figures.

: Unlike every other figure in the line (excluding build-a-figures), this one does ''not'' come with a figure stand, because... well, what would be the point?

{{-}}{{anchor|SCFMegaGun}}
[[File:SCF Optimus chase jetpack.jpg|upright=1.66|thumb]]
*'''Megatron & Convoy''' (2000)
**''Act'': '''2'''
**''Accessories'': Stand

:The second ''Super Collection Figure'' wave, like the first, also had its own Optimus Prime chase figure, this one wielding Megatron in gun mode and wearing [[Sideswipe (G1)|Sideswipe]]'s [[jet pack|rocket pack]], as seen in the [[The Transformers (cartoon)|original ''The Transformers'' cartoon]] episode "[[More than Meets the Eye, Part 3]]".

: This was presumably also released at a ratio of one per every ten cases.

{{-}}{{anchor|SCFdamage}}
[[File:SCF Optimus chase damage.jpg|upright=1.66|thumb]]
*'''Damaged Convoy''' (2001)
**''Act'': '''3'''
**''Accessories'': Stand

:There was no mass-release Optimus Prime figure for the third ''Super Collection Figure'' act, but there was another rare chase figure, this time a battle-damaged version of the original figure from the first act, referencing his injuries from ''[[The Transformers: The Movie]]''.

: Again, it was ''probably'' released in one out of every ten cases. He replaced the clear version of [[Bumblebee (G1)/merchandise#Super Collection Figure|Bumblebee]] in the case.

{{-}}{{anchor|SCFcom}}
[[File:SCF Optimus Comm.jpg|upright=1.66|thumb|He's actually checking his makeup.]]
*'''Convoy (B)''' (2001)
**''Act'': '''4'''
**''Accessories'': Stand

:For the fourth ''Super Collection Figure'' wave, Prime was rendered weaponless, speaking into the open communication panel on his left arm. Like all the figures in the fourth wave, Prime was available in both standard full color and metallic silver "pewter" versions, one of each of which was available in a standard case of twelve blindpacked figures.

: Care should be taken when moving the joints of the pewter version, as is not uncommon for the connector pegs to have gotten painted as well, resulting in stuck limbs and tearing joints. Shaving the interior of the socket slightly with a hobby knife is usually sufficient to relieve the issue. (This holds true for all other pewter figures on this list, and in fact the entire dang line from here on.)

: In eight out of every ten cases, the pewter version of Prime came packaged with the left arm of the collectible [[Metroplex (G1)#Super Collection Figure|Metroplex]] build-a-figure; these parts were either in full color or clear-plastic, packed at an equal ratio of four out of eight cases.

{{-}}{{anchor|SCFSilverMatrix}}
[[File:SCF Optimus chase silver.jpg|upright=1.66|thumb]]
*'''Convoy''' (2001)
**''Act'': '''5'''
**''Accessories'': Stand

:This version of Prime was a chase figure in the fifth ''Super Collection Figure'' act, and depicts the Autobot leader, rendered in metallic silver, opening the Matrix, referencing the end of "[[The Return of Optimus Prime, Part 2]]". This figure was packed in at a ''confirmed'' ratio of one per every ten cases.

{{-}}{{anchor|SCFMegatrongun}}
[[File:SCF Optimus Act6.jpg|upright=1.66|thumb|Shadow the Convoy, ow the edge.]]
*'''Convoy (C) with Megatron Gun Mode''' (2002)
**''Act'': '''6'''
**''Accessories'': Extra right fist, stand

:The sixth ''Super Collection Figure'' wave featured yet another mass-release version of Optimus. While this Optimus is wielding Megatron (using the same mold as the chase figure from the second Act), he has entirely new-mold arms, plus an interchangeable empty right fist. On top of that he was extensively redecoed: he's actually cast in different shades of light salmon plastic and heavily painted over in an overall darker, less saturated scheme, his normally-white parts now in medium-gray. His pec-windows are painted with a weird shiny dark blue that gives them a translucent look. The figure was available in both full color and pewter versions in an equal ratio.

: In eight out of every ten cases, the pewter version came with the head for the wave's [[Grand Maximus#Super Collection Figure|Grand Maximus]] build-a-figure, packed at a ratio of six color parts to two pewter per case.

{{-}}{{anchor|SCFStarConvoy}}
[[File:SCF Optimus Star Convoy.jpg|upright=1.66|thumb|Chonktimus Prime.]]
*'''Star Convoy''' (2002)
**''Act'': '''8'''
**''Accessories'': Stand

:After taking a break for the seventh wave, Prime returned for the eighth ''Super Collection Figure'' wave, which would prove to be the final Generation 1-themed set of figures. This figure of Prime in his Star Convoy body was available in both full color and pewter versions in an equal ratio.

:In eight out of every ten cases, the colored version came with the right arm for the wave's [[Scorponok (G1)#Super Collection Figure|Scorponok]] build-a-figure; this part could be in either full color or pewter, at a 4:4 ratio.

{{-}}{{anchor|ConvoySet}}
[[File:SCF Optimus Earth Obliteration.jpg|thumb|upright=1.66]]
*'''Special "The Earth Obliteration Plan": Exclusive Convoy Set''' ([[February 3|Feb 3]] 2002)
**''Accessories'': Stand

:Available exclusively at the Wonder Festival convention, this set includes two metallic-paint versions of Convoy figures from Act 2: the "Convoy w/ Megatron Gun" chase figure (minus the jetpack), and the truck-mode "figure".

: The set was limited to only 1000 units.

{{-}}{{anchor|ConfrontationSet}}
[[File:SCF Optimus Confrontation.jpg|thumb|upright=1.66]]
*'''TF Confrontation Set 01: Convoy vs Megatron''' ([[September 20|Sept 20]]-[[September 22|22]], 2002)
**''Accessories:'' Energon-axe

: Exclusive to the Tokyo Game Show 2002, this special set includes a new version of the original first-Act Optimus Prime figure, along with a new version of the first-Act Megatron. Both are cast in transparent plastic and completely painted over in a grimy, battle-damaged look. Both also come with the interchangeable energon-axe and mace weapons from their first-wave chase figures. Completing the theme of the set is the backdrop of the packaging interior, which depicts [[Sherman Dam]].

: Curiously, Optimus features the larger, rounded-off antennae of the [[Hasbro]] ''Heroes of Cybertron'' version of the mold, which was in production/circulation about the same time.

: As with the above Wonder Festival set, this set was also limited to 1000 units.
{{-}}
==Mega Super Collection Figure==
{{anchor|MSCF}}
*'''Convoy TV Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
*'''Convoy Metallic Version''' (February 2002)
**''Japanese ID number:'' '''01'''
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}
{{toystub}}
{{-}}

==''Heroes of Cybertron''==
[[File:HOC Optimus.jpg|upright=1.66|thumb|Hey Spike, pull my finger.]]
*'''Optimus Prime''' (2002/2006)

: Part of the first wave of Hasbro's ''[[Heroes of Cybertron (toyline)#Heroes of Cybertron|Heroes of Cybertron]]'' series, Optimus is a [[redeco]] of the standard ''Super Collection Figure'' Optimus mold, with a ''slight'' [[retool]]ing to give him longer, thicker, rounded-off helmet antennae [[for safety reasons]]. Like all the standard ''Heroes'' figures, he is cast in transparent plastic, then painted over, save for the eyes and a small patch on the back of his head, giving him a [[light-piping]] gimmick. There are a few other small deco differences to the ''Heroes'' version, such as his helmet crest changing from white to gray.

: Optimus was re-released in 2006 as part of a short-lived ''Heroes of Cybertron'' revival, celebrating the 2006 DVD release of the original ''[[The Transformers: The Movie]]''. Cast in solid-white plastic rather than translucent blue, this makes him ''very'' similar to the original ''SCF'' toy, but he retained the thicker antennae, plus got some very minor paint changes on the head: his crest-vent went back to white, and oddly his eyes are white too, rather than the ''SCF'' version's chest-window light blue.

::*''[http://www.tfu.info/2002/Autobot/HoCOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime at TFU.info]''

{{-}}{{anchor|HOCApex}}
[[File:HOC Optimus Apex.jpg|upright=1.66|thumb|Don't tell anyone, but this crap is HEAVY!]]
*'''Powermaster Optimus Prime Apex Armor''' (2002)

: An unexpected addition to the line, especially in the first wave next to another Optimus (see above), "Apex Armor" Optimus is a [[redeco]] of [[Ginrai (robot)#Super Collection Figure|God Ginrai]], the double-armored-up form of Optimus's ''[[Fight! Super Robot Lifeform Transformers (franchise)|Super-God Masterforce]]'' lookalike [[Ginrai (robot)|Ginrai]]. There are a few small paint differences between God Ginrai and Apex Armor Prime (beyond the obvious "opaque vs clear-plastic base figure" thing, we mean), most notably that the many parts on God Ginrai that are darker unpainted gray plastic, like the thighs and side-panels/guns on the lower legs, have been painted the same light gray as the chest on Optimus.

: This is the first Hasbro-release depiction of Optimus in this mode, later backed up with the release of the full-fledged toy of [[Optimus Prime (G1)/toys#PMOP|Powermaster Optimus Prime]] with [[Apex Bomber]] the following year.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeApexArmor/optimusprime.htm More information on ''Heroes of Cybertron'' Powermaster Optimus Prime Apex Armor at TFU.info]''

{{-}}{{anchor|HOCaxe}}
[[File:HOC Optimus Axe.jpg|upright=1.66|thumb|Energon Axe: Only used in [[More than Meets the Eye, Part 2|one episode]]. Ever.]]
*'''Optimus Prime''' (2002)

:This second-wave ''Heroes of Cybertron'' release is a variation of the chase figure from the first ''Super Collection Figure'' wave, depicting Prime with his right hand replaced with his energy axe. This figure is a little different from its Japanese progenitor (beyond the "clear-plastic painted over" deal, of course), being painted in normal matte/gloss rather than metallic paint, and replacing the left "pointing" hand with the clenched fist of the later "communicator" version of Optimus. It also retains the ''Heroes'' molding alterations to Optimus's helmet.

: Oddly, he comes with the same collector card as the first version, and the packaging does not call out the energy weapon in any way. The card-back cross-sell even shows only the original Optimus. (The same happened to this wave's energy-weapon-wielding [[Megatron (G1)/merchandise#Heroes of Cybertron|Megatron]].)

::*''[http://www.tfu.info/2002/Autobot/HoCAxeOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Plasma Weapon at TFU.info]''

{{-}}{{anchor|HOCSpark}}
[[File:HOC Optimus Spark Attack.jpg|upright=1.66|thumb|This can't be [[Spark attack|Spark Attack]]! His is so energetic that... he BURNS.]]
*'''Powermaster Optimus Prime Spark Attack''' (2002)

: In a yet another unusual choice for the line, this second-wave figurine is a redeco of the first God Ginrai/Powermaster Prime Apex Armor PVC figure, cast in translucent orange plastic with red gradients and flame detailing, depicting a "spark attack" mode.

: This is a variant of the ''Super Collection Figure'' "God Fire Guts" God Ginrai chase figure, which had been rendered entirely in solid metallic gold paint.

::*''[http://www.tfu.info/2002/Autobot/HoCPMOptimusPrimeSparkAttack/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime Spark Attack at TFU.info]''

{{-}}{{anchor|HOCComm}}
[[File:HOC Optimus Comm.jpg|upright=1.66|thumb|You won't believe where I'm calling you from!]]
*''' Optimus Prime with Communicator''' (2003)

:This fifth-wave ''Heroes of Cybertron'' figure is a release of the Prime figure from the fourth ''Super Collection Figure'' wave, depicting a weaponless Prime talking into the communicator in his left arm. He retains the helmet alterations of the previous versions of the figure.

: This toy also came with the head and weapons for the wave's collectible [[Metroplex (G1)#Heroes of Cybertron|Metroplex]] build-a-figure.

::*''[http://www.tfu.info/2003/Autobot/HoCCommunicatorOptimusPrime/optimusprime.htm More information on ''Heroes of Cybertron'' Optimus Prime with Communicator at TFU.info]''

{{-}}

==Hard Hero==
[[File:HardHero OptimusPrime bust.JPG|thumb|upright=0.85]]
*'''Optimus Prime''' (Bust, 2002)

: Optimus Prime was the first ''Transformers'' bust released by [[Hard Hero]]. He is approximately six inches tall at the head (8.5 at the gun) and is made out of cold-cast porcelain. There were also a version of the bust signed by the sculptor, limited to 100 samples.

{{-}}

[[File:HHero OptimusStatue.jpg|thumb|Not there. There!]]
*'''Optimus Prime''' (Full figure statue, 2003)

:Hard Hero also created a 13-inch tall Optimus Prime statue. It is sculpted pointing with his left hand while holding his ion rifle in his right.

{{-}}

==MyClone==
[[File:Prime-Myclone.jpg|upright=1.67|thumb]]
*'''Optimus Prime (2003)'''
**''Japanese ID number:'' '''MFT001''' and '''MFT006'''
**''Accessories:'' Display base
{{toydesigner|[[Kazutami Abiko]] (TakaraTomy)}}

: Optimus Prime was released three times in the [[MyClone]] line, all in the first wave of toys. He was released in both robot and truck mode, while a clear Optimus in robot mode was one of two chase figures along with a clear Megatron.
{{-}}

==Generation 1 Figure-Collection==

[[File:Bottlecap prime gun.JPG|thumb]]

*'''Convoy (gun)''' (2003)
**''Japanese ID number:'' '''C-1'''
**''Accessories:'' Display base

:At only one inch in height, this Optimus "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's Transformers [[Generation 1 Figure-Collection]]. The figure was rendered in both a standard "retro" black and white color scheme, and [[:File:Bottlecap chase prime.jpg|a rare full-color]] [[chase figure|chase]] version, and came with a leaflet, personalized with cartoon screen captures.
{{-}}
[[File:Bottlecap prime pointing.JPG|thumb]]
*'''Convoy (pointing)''' (2003)
**''Japanese ID number:'' '''C-2'''
**''Accessories:'' Display base

:The second Prime figure in the Generation 1 collection was much like the first, only sculpted with an empty hand, pointing off into the distance like a lot of Optimus Prime figures are wont to do.
::*''[http://snakas.web.fc2.com/misc_item/kabaya_bottle.htm More information on the Bottlecap Collection at Autobase Aichi]''

{{--}}

==KT Figure Collection==
[[File:Optimus_Prime_KT.jpg|upright=1.66|thumb|Thanks for helping me... [[City of Steel (episode)|pull myself together.]]]]
*'''Convoy''' (KT Figure Collection, 2004)
: This figure was designed by [[Yuki Ohshima]] and produced by [[KT Figure Collection]]. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in ''[[The Transformers: The Movie]]''.

{{-}}{{anchor|KTFCRevival}}
[[File:Optimus_Prime_ex_KT.jpg|upright=1.44|thumb|No, I am [[redeco|NOT]] [[Ultra Magnus (G1)|Ultra Magnus]]! I'm silver, not [[:File:Magnuslongshot.jpg|white]]]]
*'''Convoy "Revival version"''' (''[[Figure Ō]]'' exclusive, 2004)
: The 82nd issue of the hobby magazine ''[[Figure Ō]]'' came with a [[redeco]] version of Optimus Prime's mini bust. It is painted completely silver, making him appear to be coated with the special alloy from "[[The Return of Optimus Prime, Part 2]]".

{{-}}

==Palisades==
[[File:Palisades WarWithinPrime.jpg|thumb]]
*'''The War Within Optimus Prime''' ([[Palisades Toys|Palisades]], 2005)

:'''The War Within'' Optimus Prime is a six-inch-tall polystone mini statue based on his appearance in the popular [[War Within (franchise)|''War Within'' comic book series]]. Prime stands on a silver Autobot-insignia stand, is decorated with dirt to simulate battle damage, and has articulation in his head and arms. The statue was limited to 1500 pieces worldwide.

{{-}}

==''Titanium Series''==
[[File:TitaniumRMWWPrime.jpg|thumb|Descend, Squattimus Prime.]]
*'''War Within Optimus Prime''' (3" Robot Masters, 2006)
**''Accessories:'' Ion Blaster, display stand

: ''War Within'' Optimus Prime is the second toy representation of Optimus Prime as he appears in ''War Within''. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

: He is squat. Very squat.

{{-}}
{{anchor|TitaniumG1}}
[[File:TitaniumRMG1Prime.jpg|thumb|Drop and give me twenty, soldier!]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand

: The first Titanium representation of G1 Optimus Prime has a well-proportioned sculpt based on his 20th Anniversary toy. Constructed partially of die-cast metal, this three inch version cannot transform and has some articulation, limited to his shoulders, head and waist.

{{-}}
{{anchor|TitaniumG1BattleDamage}}
[[File:TF-Titanium-Series-3-inch-Robot-Masters-Battle-Damaged-Optimus-Prime.jpg|thumb|"Drop dead and give me 20!"]]
*'''Optimus Prime''' (3" Robot Master, 2006)
**''Accessories:'' Ion Blaster, display stand
: This is a repaint of the 3" G1 Optimus Prime titanium figurine, with a 'battle-damaged' deco.
{{-}}{{anchor|tit2pack}}
[[File:Titanium-Series-Optimus-Prime-and-Bumblebee-2pack.jpg|thumb|"You! YOU STOLE MY LAST CESIUM SALAMI!"]]
*'''Optimus Prime & Bumblebee''' (2-pack, 2007)
**''Accessories:'' Ion Blaster, display stand
: A Toys 'R' Us [[exclusive]] two-pack, this set features "Supermetal Finish" (read: shiny) versions of the "Robot Master" ''Titaniums'' Optimus Prime and Bumblebee.

{{-}}

==First 4 Figures==
[[File:First 4 Figures Battlefield Optimus vs Megatron.jpg|thumb|upright=1.66]]
*'''Optimus Prime vs Megatron''' (2006)
**''Accessories:'' extra head for Megatron (with detachable helmet), extra hand for Optimus Prime
{{toydesigner|[[Little IroN]] (concept artist), [["Mad" Alterton]] (sculptor), [[Leandro Sivori]] (painter)}}

:The first entry in the ''Transformers Battlefield'' line by model company [[First 4 Figures]], this 13-inch tall diorama depicts Optimus Prime slugging it out with Megatron. Optimus is posed as though doing a shoulder shove while holding his ion blaster, but a provided "REP" (Replaceable Exterior Part) hand allows buyers to instead recontexualise the pose as a spinning backhand slap. Megatron comes with a REP of a battle damaged version of his head, which features a detachable "helmet" to show off his exposed robo-brain.

:The model was limited to 1,850 pieces worldwide, and came with a numbered certificate of authenticity, which allowed buyers to reserve the same number on their next purchase in the series. It also came with an A4 mini-poster depicting the same fight between Optimus and Megatron by artist [[Little IroN]], which was also sold separately as a limited edition A2 poster.

:As a ''Transformers Battlefield'' release, this model featured a detailed base designed to interlock with others in the same range to create a massive battle diorama. Unfortunately, a general discontinuation of First 4 Figures' ''Transformers''-related output put the kibosh on any further ''Battlefield'' models.

{{-}}{{anchor|F4F1}}
[[File:SnakeEyes OptimusPrime statue.jpg|thumb|upright=1.66|Get with the program.]]
*'''Optimus Prime and Snake Eyes''' (<s>2006</s> unreleased)

:Initially announced at UK Toy Fair in 2006<ref>[https://news.tfw2005.com/2006/01/25/first4figures-beast-wars-and-transformers-vs-g-i-joe-statuesbusts-4267 "First4Figures Beast Wars and Transformers VS. G.I. Joe Statues/Busts"] at TFW2005.com</ref> with a second showing at New York [[Toy Fair]] the following month,<ref>[https://tformers.com/transformers-/5568/news.html "Toy Fair 2006 - First4Figures TF & GI Joe Statues& Busts"] at tformers.com</ref> "Optimus Prime and Snake Eyes" was intended to be one of the first releases in First 4 Figures' ''[[G.I. Joe vs. the Transformers]]'' comic tie-in subline. This 8-inch tall bust depicted a one-armed Optimus Prime in the [[Cobra]] [[H.I.S.S. tank|HISS tank]] body he used in that series holding a battle-ready [[Snake-Eyes#First 4 Figures|Snake Eyes]], directly recreating the cover to the [[G.I. Joe vs. the Transformers issue 1|first issue]] of the comic (originally drawn by [[Mike S. Miller]]).

:Unfortunately, this statue was a casualty of F4F's discontinuation of ''Transformers'' product, the result of a challenging marketplace and lack of retailer interest.
{{canceledtoy}}

{{-}}{{anchor|F4F2}}
[[File:StormShadow OptimusPrime statue.jpg|thumb|upright=0.85|Hey, Private Haircut! I might have taken a bit too much off...YOUR HEAD!]]
*'''Optimus Prime vs Storm Shadow''' (2007)
{{toydesigner | [[Siamak Roshani]], [[Joel Chen]] (sculptors)}}
:The third reveal in the ''G.I. Joe vs. the Transformers'' series, this statue is 7.5 inches tall and depicts [[Storm Shadow#First 4 Figures|Storm Shadow]] in a victorious stance on Prime's damaged, disembodied head, based on the cover of [[G.I. Joe vs. the Transformers issue 5|''G.I. Joe vs. the Transformers'' issue 5]] (also by Miller). Storm Shadow is only a mite bigger than your standard 3.75" ''G.I. Joe'' figure, making this statue roughly in scale with the rest of your collection!

:After being revealed at [[San Diego Comic-Con]] in 2006,<ref>[https://tformers.com/ig.php?mode=album&album=6265&dispsize=800&start=0 Tformers.com's SDCC 2006 gallery]</ref> "Optimus Prime vs Storm Shadow" was released in January 2007, holding the dubious honour of being the only one of First 4 Figures' ''G.I. Joe vs. the Transformers'' range to see release. The statue was limited to 250 pieces in the U.S., and 250 pieces in the UK.

::*''[https://www.yojoe.com/archive/statuary/stormshadowprime/ More information on Optimus Prime vs Storm Shadow at YoJoe.com]''

{{-}}

==Diamond Select==
[[File:Optimus Prime Mini-bust.jpg|thumb|"I can't roll out without my legs installed!"]]
*'''Optimus Prime''' (Diamond Select, 2007)
:A mini-bust of Optimus Prime based on his appearance in the comic was released by [[Diamond Select Toys|Diamond Select]] in 2007. The figure includes the upper body of Optimus Prime, carrying his laser rifle and posed as if preparing to charge. The Matrix of Leadership is sculpted into the base of the statue.

{{-}}
[[File:Ark Globe.jpg|thumb]]
*'''Autobot Snow Globe''' (Diamond Select, 2007)

:Optimus Prime is also featured in Diamond Select's Autobot-themed snow globe, posing above a [[Mount St. Hilary]] base which also features the ''[[Ark (G1)|Ark]]'' and [[Omega Supreme (G1)|Omega Supreme]]. The globe was sculpted by [[Art Asylum]].

{{-}}

[[File:DST08 FinalBattlePrimeBust.jpg|thumb|Hold this for a moment won't you.]]
*'''Final Battle Optimus Prime''' (Diamond Select, 2008)
:Final Battle Optimus Prime was exclusive to the online retailer Action Figure Xpress. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and limited to 1000 pieces. Optimus Prime is shown after his climactic battle with Megatron during Transformers: The Movie; shortly before he passed the Matrix of Leadership (which is also removable here) to Ultra Magnus. His base features the life support readout that monitored both his declining health and eventual death.

{{-}}

{{anchor|G1AnimatedOptimusPrimeBust}}
[[File:DST SDCCToonPrimeBust.jpg|thumb]]
*'''G1 Animated Optimus Prime''' (Diamond Select, 2008)
:G1 Animated Optimus Prime was exclusive to the 2008 San Diego Comic Con. He was sculpted by [[Mark Wong]] of [[Art Asylum]] and features a more matte color scheme to better match the cartoon's palette.

{{-}}

[[File:DiamondSelect PowermasterOptimus.jpg|thumb|"It's not great to be back."]]
*'''Powermaster Optimus Prime''' (Diamond Select, 2010)

:This fourth Optimus Prime bust was to be based on his [[Powermaster]] incarnation, but appears to have been canceled.

{{canceledtoy}}

{{-}}
[[File:DiamondSelect OptimusPrime bustbank.jpg|thumb|"Saving Money is the right to all Sentient Beings".]]
*'''Optimus Prime Bust Bank''' (Diamond Select, 2010)

:A 6-inch hollow Optimus Prime bust to keep your spare change safe! It would've featured articulation in its shoulders and neck, but like the Powermaster bust, it never saw release.

{{canceledtoy}}
{{-}}

==''Transformers'' (2007)==
*'''Optimash Prime''' (2007)
{{main|Optimash Prime}}
{{-}}
[[File:Softimus Prime.jpg|thumb|Freedom is the right of all sentient beings... in bed.]]
*'''Softimus Prime''' (2007)

:Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He features Movie-style faction symbols on his right arm and both sides of his cab mode. He is love.

::*''[http://www.tfu.info/2007/Autobot/SoftimusPrime/softimusprime.htm More information on Softimus Prime at TFU.info]''

{{-}}

==''Robot Heroes''==
[[File:RH Optimus vs Ravage.jpg|thumb|upright=1.66|Mini-Me!]]
*'''Optimus Prime & Ravage''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Part of the first wave of ''[[Robot Heroes (toyline)|Robot Heroes]]'' 2-packs (sold under the [[Transformers (2007 toyline)|2007 live-action-movie line]] branding), Optimus Prime is a simple, yet well-detailed two-inch tall figurine with exaggerated, cartoony proportions, with swivel articulation at the neck and shoulders. He is sculpted holding his Ion Blaster rifle in his right fist and his left arm in a pointing pose. He is also love, and demands that you pull his [[More than Meets the Eye, Part 3#Notes|Finger of Doom]].

: He was sold in a two-pack with [[Ravage (G1)/toys#Robot Heroes|Ravage]], positioned in a way that gives an impression of [http://orig12.deviantart.net/b22b/f/2008/216/7/1/optimus_prime_vs_ravage_by_cobaltkitty.jpg him freaking out to Ravage's size].

: This version of Optimus was later also released as part of a set with a 100-piece [[jigsaw puzzle]] with no apparent changes.

{{anchor|RHBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: In some countries outside of North America, Optimus Prime was released individually in a blindpack with no notable changes.

{{-}}{{anchor|RH5pack}}
[[File:Robot Hero Supermetal Optimus Prime.jpg|thumb|upright=0.99|Cuteness is the right of all sentient beings.]]
*'''Decepticon Sneak Attack''' (Multi-pack, 2007)

: "Optimus Prime with Supermetal Finish" is a slightly-shinier [[redeco]] of the previous ''Robot Heroes'' figure; this is the most noticeable with his blue parts, which are now in a much brighter, richer gloss-blue paint rather than the unpainted darker-blue matte plastic of the two-pack version.

: He came in a [[Walmart]] exclusive multipack, alogn with [[Mirage (G1)/toys#RH5pack|Hologram Mirage]], [[Cliffjumper (G1)/toys#Robot Heroes|Cliffjumper]], "Supermetal Finish" [[Megatron (G1)/merchandise#RH5pack|Megatron]], and [[Skywarp (G1)/toys#Robot Heroes|Skywarp]].

{{anchor|RHFinishBlindpack}}
*'''Optimus Prime with Supermetal Finish''' (Single-pack, 2008)

: "Supermetal Finish" Optimus Prime also saw release in a blindpack outside of North America.

{{-}}{{anchor|RHUnicron}}
[[File:RH Prime vs Unicron.jpg|thumb|upright=1.66|'Til all are cute.]]
*'''Optimus Prime & Unicron''' (Two-pack, 2007)
{{toydesigner|[[Bill Rawley]] (Hasbro)|[[Marcelo Matere]] (concept artist)}}

: Sold in the third wave of ''Robot Heroes'', this version of Optimus is posed opening the [[Matrix of Leadership]], complete with clear-plastic shine.

: He was packed with a very small [[Unicron/toys#Robot Heroes|Unicron]].

{{anchor|RHMatrixBlindpack}}
*'''Optimus Prime''' (Single-pack, 2008)

: Just like the previous figures, the Matrix-bearing Prime also received a blindpacked release.
{{--}}

==''Attacktix''==

*'''Optimus Prime''' (Starter Set, 2007)
[[File:Attacktix Optimus Prime.jpg|thumb|He shoots sideways. The direction, not [[Sideways (Armada)|the character]].]]
{{attacktix
|ID=TF2-19
|faction=Autobot
|class=Leader
|special=Last Stand - 13/26 (50%) success ratio
|cost=40
|speed=6
|attacktype=Shooter (Force Blast)
}}
{{-}}
:Optimus Prime will shoot you down. He was released as part of the 2007 Starter Set along with ''[[The Transformers (franchise)|Generation 1]]'' [[Megatron (G1)/toys|Megatron]], ''[[Transformers: Energon (franchise)|Energon]]'' [[Landquake (Energon)|Landquake]] and ''[[Transformers: Cybertron (franchise)|Cybertron]]'' [[Skywarp (Armada)|Skywarp]].

:Optimus' Last Stand special allows him to stand up if he's the only figure in your team left in play. If you're down to two men you might even be tempted to shoot your own man just to keep Optimus Prime in play. Don't though. [[Peter Cullen]] wouldn't approve.

:Sadly you can't bring him into play with the ''Cybertron'' [[Optimus Prime (Armada)/toys|Super Optimus Prime]] vehicle mode because he's not ''Super'' Optimus Prime.
{{-}}

==''Revoltech''==
[[File:Revoltech Convoy.jpg|thumb|upright=1.66|Windowbra! ''(2007 Version pictured)'']]
*'''Convoy''' (2007/2014)
**''Series number:'' '''019'''
**''Legacy of Revoltech ID number'': '''LR-008'''
**''Accessories:'' Ion blaster, Autobot Matrix of Leadership, two clenched fists, gun-wielding right hand, pointing right hand, open left hand

:A non-transforming but ''highly'' articulated Optimus Prime action figure, ''[[Revoltech]]'' Convoy uses the ''Revoltech'' "revolver joints" for maximum poseability. Prime comes with his now-standard ion blaster and Matrix of Leadership accessories, as well as a few alternate hands; while one of the hands is specifically designed to grip the ion blaster, he can't really do anything dramatic with the Matrix, and it just sort of sits in his open-palmed left hand. His sculpting is explicitly in the style of [[Pat Lee|Pat "serfdom" Lee]]'s interpretation of Prime, but due to physical constraints has no lack of perspective.

:Unsurprisingly, this mold was redecoed to create ''Revoltech'' [[Ultra Magnus (G1)/merchandise#Revoltech|Ultra Magnus]]. Magnus comes with a new hand mold that can be used to connect him and Prime together in a handshake.

:The initial reveal of the figure (sculpted by Yamaguchi) features swiveling cut joints instead of "revolver joints" (notably the hip parts), with a rather jarring angled joint on the waist (which results in a "sliced" appearance if swiveled).

:Unfortunately, ''Revoltech'' Convoy cannot be distributed to the US due to licensing restrictions, so fans must rely on online hobby shops to import him.

:In 2014, ''Revoltech'' Convoy was reissued as part of the ''Legacy of Revoltech'' line, with an increased price of 3900 yen. This rerelease uses revised Revoltech joints, which come in matte black instead of glossy and have more ratcheting points than previous releases.
{{-}}
===''Amazing Yamaguchi''===
[[File:Tf-Yamaguchi-Revoltech-014-Convoy.jpg|upright=1.66|thumb]]
*'''Convoy''' (2019)
**''Series number:'' 014
**''Accessories:'' Ion Blaster, Energon Axe, 1 pair of splayed hands, 1 pair of trigger hands, left clawed hand, right pointing hand, interlocked hand

:''Amazing Yamaguchi'' Convoy is an all-new take to the Revoltech figure above, but more poseable. Apart from the Ion Blaster, this figure comes with an Energon Axe accessory, and an interlocked hand accessory that is designed to resemble the haymaker that took down Megatron in ''[[The Transformers: The Movie]]''.

:Unlike the first Revoltech figure, Convoy features painted-details-on-colored-plastic rather than fully coating them. The plastic is noted to have a hollow feel compared to the first figure.

:Due to production delays, the release date was rescheduled from September 29 to October 24.
{{-}}

==Sota Toys==
*'''Transformers Chess Set''' (<s>2007</s>)
:An Optimus Prime piece was to be the Autobot-side King on a [[Chess#Sota Toys|chess set]] based on Generation 1, but the set apparently never saw release.
{{canceledtoy}}
{{-}}

==Ornaments==
*'''Optimus Prime''' (2007)
[[File:OptimusPrimeG1Ornament.jpg|thumb|100px|''(American Greetings version pictured)'']]

:Manufactured by [[American Greetings]] as part of their Heirloom ornament collection, this hanging sculpt of Optimus Prime is based upon the 20th Anniversary toy release.
{{-}}

*'''Optimus Prime''' (2014)
[[File:Optimus-prime-keepsake-Hallmark.jpg|thumb|''(Hallmark version pictured)'']]
:Manufactured by [[Hallmark]] as part of their Keepsake ornament collection as part of the Hasbro series which includes ornaments based on [[My Little Pony]] G1, the electronic game Simon, and the board game Sorry, this hanging sculpt of Optimus Prime is based upon the original G1 toy cab in robot mode posed like 1984 box art.
{{-}}

==''Mighty Muggs''==
[[File:MightyMuggs OptimusPrime.jpg|thumb|Optimus lost his ears in the rock tumbler.]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: This [[super deformed]], non-transformable Optimus Prime figure uses the standard [[Mighty Muggs]] body template, with swivel joints in his neck and limbs. He comes with a similarly super-deformed version of his ion rifle.
{{-}}

{{anchor|SDCCmightymugg}}
[[File:MightyMuggs MetallicOptimusPrime.jpg|thumb|Optimus, did you polish your head in the Shine-O Ball-O?]]
*'''Optimus Prime''' (2009)
**''Accessories:'' Ion rifle

: An [[exclusive]] to the 2009 [[San Diego Comic-Con]], this Optimus Prime Mugg has a shiny metallic finish.
{{-}}

{{anchor|2018mightymugg}}
[[File:MightyMuggs 2018 Optimus.jpg|thumb|upright=1.44|You ever get so mad you sprout new ears?]]
*'''Optimus Prime''' ([[2018]])
**''ID number:'' '''01'''

: Based on his [[evergreen]] design, this Optimus is part of the 2018 ''Mighty Muggs'' relaunch. As part of the new line, he has a helmet that can be pressed down to change his expression. He features three different faces: [[Mouthplate|classic]], angry, and angrier.
{{-}}

==Transformers Wacky Wobblers==
[[File:WackyWobblers G1OptimusPrime.jpg|thumb|upright=0.85]]
*'''Optimus Prime''' (2009)

: This Optimus Prime {{w|bobblehead}} is part of the popular ''[[Wacky Wobblers]]'' line produced by {{w|Funko}}. Aside from the standard-issue big wobbling head, he features an ion rifle molded onto his right hand and his arms swivel at the shoulders. Optimus is affixed to a base with his name on it.
{{-}}

==USB-Powered Speaker Head==
*'''Optimus Prime USB-Powered Speaker Head'''
[[File:G1-optimusprime-merc-speaker.jpg|thumb]]
: As a 6.5" figure, Optimus Prime's head contains twin {{w|Universal Serial Bus|USB}}-powered speakers. There are two speakers inside each side of his head. The control panel, USB port, and earphone port are located in the back of the head. Under the neck, there is a display to support the head.
: The speaker was redecoed to create Ultra Magnus Speaker.
{{-}}

==Transformers Backpacks==
*'''Optimus Prime''' (2009)

:Made by [[F*A*B Starpoint]], these backpacks are allegedly "engineered for style, safety, comfort... and saving the Universe!" The Generation 1 Optimus Prime design features a stock silhouette of Optimus Prime surrounded by stars, like the [[Paramount Pictures]] logo, while on the lower compartment there is a gigantic Autobot sigil.

==Universal Studios==
*'''Optimus Prime plushie''' (2011)

:Created for the [[Transformers: The Ride – 3D|Transformers ride at Universal Orlando]], a [[super deformed]] plush toy of Optimus was made available at the Supply Vault gift shop near the opening of the ride.

==Tomica==
[[File:TF-Tomica-Wrapping-Trailer.jpg|thumb]]
*'''Transformers Wrapping Trailer''' (2011)
:''[[Tomica]]'' "Transformers Wrapping Trailer" is a die-cast, non-transforming semi tractor-trailer. A redeco of the 2008 "[[wikia:tomica|Tomica Hero: Rescue Force Trailer]]" toy, "Transformers Wrapping Trailer" renders the cab in Generation 1 Optimus Prime colors, while the trailer is decked out with pictures of [[live-action film series]] [[Optimus Prime (Movie)|Optimus Prime]], [[Bumblebee (Movie)|Bumblebee]] and [[Ironhide (Movie)|Ironhide]]. Like all Tomica toys & all [[Go-Bot (G2)#Toys|''Generation 2'' Go-Bots]] and [[Spychanger]]s, Wrapping Trailer features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces.
{{-}}

==Transformers x Mimobot==
[[File:Mimobot OptimusPrime.jpg|thumb|upright=1.66|Why the long face?]]
*'''Optimus Prime Mimobot''' (Mimoco, 2011)
:Produced by [[Mimoco]] as part of their multi-brand line of designer USB "Mimobot" flash drives, this Optimus Prime memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.
{{-}}

==Cuponk==
[[Image:NYCC2011 Cuponk.jpg|thumb|250px|The real contest is whether Prime's medal or Megatron's belt is cooler.]]
*'''Transformers Cuponk''' (2011)
:A New York Comicon exclusive, this set includes two Cuponk cups and 6 ping pong balls. Prime is featured on one cup and one ping pong ball. The same cup also features [[Bumblebee (G1)|Bumblebee]], [[Jazz (G1)|Jazz]], [[Grimlock (G1)|Grimlock]], and [[Hot Rod (G1)|Hot Rod]].
{{-}}

==Titan Warriors==
[[File:Titan-Warrior-Optimus-Prime.jpg|upright=1.11|thumb|Sofubi Hero figures are the right to all young sentient beings.]]
*'''Titan Warrior 5-Pack''' (2013)
:Available at San Diego Comic Con 2013, This Optimus Prime is a 6" PVC Titan Warrior figure (similar to Bandai's ''Ultra/Sentai/Rider Hero, Movie Monster Series'') representing his Generation 1 character. He was packed with [[Grimlock (G1)/toys|Grimlock]], [[Megatron (G1)/toys|Megatron]], [[Starscream (G1)/toys|Starscream]] and [[Soundwave (G1)/toys|Soundwave]].

*'''Optimus Prime''' (Titan Warrior, 2014)
:The Titan Warriors Optimus Prime toy was released individually, under the Beast Hunters Titan Heroes subline.

{{-}}

==''The Loyal Subjects''==
*'''Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Talking}}
*'''Talking Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Larger}}
*'''Talking 5.5" Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Blank}}
*'''8" Blank/DIY Optimus Prime''' (2014)
{{anchor|The Loyal Subjects OG}}
*'''8" OG Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Fiberglass}}
*'''4' Fiberglass Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Hot Topic}}
*'''Talking 5.5" Optimus Prime w/ Energon Axe''' (2014)
{{anchor|The Loyal Subjects Dead}}
*'''8" Dead Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Silver}}
*'''8" Silver Bullethole Optimus Prime''' (2013)
{{anchor|The Loyal Subjects Gold}}
*'''8" Gold Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Black Gloss}}
*'''8" Black Gloss Bullethole Optimus Prime''' (2014)
{{anchor|The Loyal Subjects Gamestop}}
*'''Talking Optimus Prime''' (2014)
{{charstubtoys}}
{{-}}

==''Mecha Nations''==
[[File:klog tfop 003.jpg|thumb|upright=1.66|Prime, not the shrink wrap!]]
*'''Optimus Prime''' (2014)
**''ID Number:'' '''MN01'''
**''Accessories:'' Ion Blaster, Energon Axe, Removable Armor.

:Created by [[Kids Logic]], this [[super deformed]] G1 Optimus Prime stands 6" tall and is articulated. He features a metallic color scheme, removable armor and replacement hands. He also features LED light up eyes, lights, weapons and [[Matrix of Leadership|Creation Matrix]].

:This figure was also redecoed into Mecha Nations [[Nemesis Prime (G1)#Mecha Nations|Black Convoy]] and [[Ultra Magnus (G1)/merchandise#Mecha Nations|Ultra Magnus]].

{{-}}

==''Ultimetal''==
[[File:Ultimetal-UM01-Optimus-Prime.jpg|upright=1.66|thumb|"Why waste your money so easily Prime?"]]
*'''Optimus Prime''' (2014)
**''ID number:'' '''UM-01'''
**''Accessories:'' Ion blaster, energon-axe, small Matrix, 24 armor pieces, 2 smokestacks, large Matrix, display stand, 8 display stand parts, remote control

: ''Ultimetal'' Optimus Prime is a large non-transforming figure produced by [[Art Storm]], standing at an impressive 1 foot 4 inches/43 cm and made from extensive [[die-cast]] metal. Packaged in four different boxes, he features plenty of articulation and detail, including an opening chest and numerous magnetically attached armor panels that, when removed, reveal Prime's internal anatomy. He also has electronic light-up eyes and roof lights as well as 20 spoken English phrases, all activated via remote control. His [[mouthplate]] even moves when he talks, just like in the cartoon!

: Prime comes with an ion blaster which can also be opened to reveal technical detail, an energon-axe, and two Matrices of Leadership of different sizes. The smaller one fits into his chest, where it can be lit up by an LED, while the larger one lights up on its own and can be held in his hands or placed on display. Prime's display stand has smaller stands for the Matrix and ion blaster and also has light-up parts.

: Optimus Prime was recolored into the inner robot of ''Ultimetal'' [[Ultra Magnus (G1)/merchandise#Ultimetal|Ultra Magnus]].

::*''[http://artstorm.co.jp/ultimetal_optimusprime.html More information on ''Ultimetal'' Optimus Prime at Art Storm's official site]''

*'''Optimus Prime - Battle Damaged''' (2018?)
**''ID number:'' '''UM-01BD'''

{{-}}

==''EX Gōkin''==
[[File:EXGokin Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2014)
**''Accessories:'' Two fists, two open hands, two gripping hands, right pointing hand, ion blaster, energon-axe, display stand

: A 6.6-inch tall non-transforming Optimus Prime action figure was produced by Art Storm as part of their ''EX Gōkin Transformers Series'' line. He comes with his trademark blaster and energon-axe as well a number of extra hands, and his chest opens to reveal a non-removable Matrix.

::*''[http://artstorm.co.jp/exgokin_transformersseries_convoy.html More information on ''EX Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==Hikari==
[[File:HikariLimitedEditionMetallicOptimusPrime.jpg|thumb|upright|150px]]
*'''Metallic Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime with a metallic finish. This figure is a limited edition, and limited to 2,000 pieces.

:This mold was also used to make the other limited edition Optimus Primes seen below.

{{-}}
[[File:HikariLimitedEditionClearGlitterOptimusPrime.jpg|thumb|upright|150px]]
*'''Optimus Prime Clear Glitter''' (2014)

:A non-transforming vinyl Optimus Prime figure. While retaining the classic, original colors, this mold is redone to be clear plastic, with glitter bits put into the figure. This vinyl is a limited edition, and limited to 3,000 pieces.

{{-}}
[[File:HikariLimitedEditionBattleReadyOptimusPrime.jpg|thumb|upright|150px]]
*'''Battle Ready Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The mold is Redon again, this time in a battle-damaged look, while he retains the classic Optimus Prime colors. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionGreySkullOptimusPrime.jpg|thumb|upright|150px|By the power of Grayskull... '''''I HAVE THE POWER!''''']]
*'''Grey Skull Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. This vinyl takes the colors in a different way, which is mostly white with some dark grey areas. The colors to kinda look skeleton-ish. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDistressedOptimusPrime.jpg|thumb|upright|150px]]
*'''Distressed Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime. The colors take on an [[Optimus Prime (Movie)#''Age of Extinction'' film|Age of Extinction Optimus Prime]], in his flat-nose truck mode. This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionFireOptimusPrime.jpg|thumb|upright|150px]]
*'''Fire Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in clear plastic. The colors seem to homage the Generation 1 [[Hot Rod (G1)|Rodimus Prime]].,This figure is a limited edition, and limited to 1,000 pieces.

{{-}}
[[File:HikariLimitedEditionDangerousOptimusPrime.jpg|thumb|upright|150px]]
*'''Dangerous Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, done in a camouflage style. This figure is a limited edition, and limited to only 600 pieces.

{{-}}
[[File:HikariLimitedEdition24KOptimusPrime.jpg|thumb|upright|150px]]
*'''24K Optimus Prime''' (2014)

:A non-transforming vinyl Optimus Prime, cast in gold plastic. This figure is a limited edition, and only limited to 600 pieces.

{{-}}
==''Thrilling 30''==
*'''Optimus Prime''' (Collectible Figurine, 2014)
**''Series / Number:'' '''1 / #1'''
**''Accessories:'' Collector's base
:A super-deformed Optimus Prime was released among the blindpacked [[Thrilling 30#Collectible Figurines|''Thrilling 30'' Collectible Figurines]] by [[Goldie Marketing]]. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

*'''Collectible Figurines''' (5-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 5 Collector's bases
:The same Optimus Prime figurine was also available in a 5-pack alongside [[Megatron (G1)/merchandise#Thrilling 30|Megatron]], [[Ratchet (G1)/toys#Thrilling 30|Ratchet]], [[Starscream (G1)/merchandise#Thrilling 30|Starscream]] and [[Soundwave (G1)/merchandise#Thrilling 30|Soundwave]].

*'''Optimus Prime 3-pack''' (3-pack, 2014)
**''Series:'' '''1'''
**''Accessories:'' 3 Collector's bases
:The same Optimus Prime figurine was ''also'' available in a 3-pack alongside [[Optimus Prime (WFC)/merchandise#Thrilling 30|''Prime'' Optimus Prime]] and [[Optimus Prime (Movie)/merchandise#Thrilling 30|Movie Optimus Prime]].
{{-}}

==Leg Avenue==
{{anchor|LegAvenue}}
[[File:Leg Avenue Optimus Prime.jpg|right|upright=.75|thumb|]]
:Costume and lingerie manufacturer Leg Avenue released an officially licenced Bumblebee costume along side ones for [[Bumblebee (G1)/merchandise#LegAvenue|Bumblebee]] and [[Megatron (G1)/merchandise#LegAvenue|Megatron]].

{{-}}

==''Tiny Titans''==
*'''Optimus Prime''' (Tiny Titans, 2015)
**''Series'': '''2'''
**''Number'': '''10/12'''

: Part of the third assortment of ''[[Tiny Titans]]'' [[blindpacking|blindpacks]], this version of Optimus Prime is a very small, soft-plastic figure of him in robot mode, brandishing both his rifle and his energy-axe weapon in a running battle pose.

: He includes a collectible card that renders him in the [[Transformers: Robots in Disguise (2015 franchise)|2015 ''Robots in Disguise'']] styling. The card includes a scan-badge for the [[Transformers: Robots in Disguise (mobile game)|''Robots in Disguise'' mobile game]], which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.

{{-}}{{anchor|TinyTitans2}}
[[File:TinyTitans OptimusG1S5.jpg|upright=1.67|thumb]]
*'''Optimus Prime''' (Tiny Titans, 2016)
**''Series'': '''5'''
**''Number'': '''11/12'''

: Part of the fifth assortment of ''Tiny Titans'', this version of Optimus is in a more neutral pose, this time only carrying his rifle.

: As per usual, he includes a collectible card that includes a scan-badge for the ''Robots in Disguise'' mobile game, which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.
{{-}}

==''D-Style''==
[[File:D-Style-OptimusPrime.jpg|thumb|upright=1.66|You got D-touch. You got D-power]]
*'''Convoy''' (2015)
**''ID number:'' '''43'''
**''Accessories:'' Two fists, pointing right hand, Ion blaster, energon-axe, Autobot Matrix of Leadership, Convoy cab with trailer

:An Optimus Prime was produced by [[Kotobukiya]] as part of ''[[D-Style]]'', their franchise-spanning line of super deformed model kits. His accessories include an ion blaster, an energon-axe, a Matrix that can store in his chest, and a tiny super deformed representation of his truck mode which can carry the ion blaster. Moving his antennae causes his mouthplate to move up and down.

:For a small figure it includes a large amount of articulation, including ankle tilts and top of legs tilting away from the yellow codpiece.

: The Convoy Trailer, ion blaster and the gold part of the Matrix all require painting. In addition, on promotional images ''all'' the black details and lines (for example on the front thighs and round the edge of the yellow codpiece) are painted and the eyes have been painted blue instead of left as clear plastic.

: Amusingly, the head has the [http://www.1999.co.jp/itbig29/10294593z.jpg mouth-less face] underneath Optimus' mouthplate, as a either a reference to the error from [[The Search for Alpha Trion]] or limitation in the model kit (or both).

:This mold was also used to make ''D-Style'' [[Nemesis Prime (G1)#D-Style|Black Convoy]].
{{-}}

==''ES Gōkin''==
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe, Matrix, left & right gripping hands, left & right open hands, left & right pointing hands, display stand

:Optimus Prime was also released as part of Art Storm's ''ES Gōkin'' series, a line of posable super deformed figures. He comes with his trademark gun which he can hold in either hand, an energon-axe that plugs into his wrist sockets, and a Matrix he can hold but not store in his chest.

::*''[http://artstorm.co.jp/esgokin_convoy.html More information on ''ES Gōkin'' Convoy at Art Storm's official site]''
{{-}}

==''D-Collection''==
[[File:D-Collection Convoy.jpg|thumb|upright=1.66]]
*'''Convoy''' (2015)
**''Accessories:'' Ion blaster, energon-axe

:[[Kabaya]]'s ''D-Collection'' Optimus Prime is a small super deformed figure that requires some assembly and features articulation limited to his shoulders. He comes with his trademark blaster and axe accessories. Sold blindpacked, Prime is available as both a standard full color figure and a rare clear plastic version. He comes with chewing gum.
{{-}}

==''Metal Earth''==
[[File:Metal Earth Optimus Prime.jpg|thumb]]
*'''Optimus Prime''' (2015)
**''ID number:'' '''MMS300'''
:''[[Metal Earth]]'' Optimus Prime is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".
{{-}}
[[File:Metal Earth Legends Optimus Prime.jpg|thumb|[[Minecraft|Minecraft x Transformers]] before ''Minecraft x Transformers'' was a thing]]
*'''Optimus Prime''' (Legends, 2019)
**''ID number:'' '''MEM055'''
:''Metal Earth Legends'' Optimus Prime is a DIY 3D steel model kit in the shape of a super deformed version of the [[evergreen]] Optimus design. The kit's difficulty rating is given as "moderate".
{{-}}

==Hot Toys==
*'''Optimus Prime (Starscream Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Ion Blaster, two wings, two wing mounts, two null-rays, Matrix of Leadership, Base, Starscream's head (Sideshow Collectable's exclusive)

:Released by [[Hot Toys]] this high end collector figure stands approximately 30 cm tall. It features LED light up eyes and it's chest can open to reveal a LED light up, removable Matrix of Leadership. This version comes with a pair of wings and two [[null-ray]]s from Starscream that Optimus can attach. The Sideshow exclusive version of this comes with Starscream's severed head.

*'''Optimus Prime (Megatron Version)'''
**''Accessories'': Two articulated hands, two gripping hands, Fusion cannon, Ion Blaster, gun with stock, set of wheels, two cannon mounting accessories, shoulder mount, Matrix of Leadership, Base

:This version of the figure has accessories themed from Megatron. These include Megatron's [[fusion cannon]], and a long rifle that passingly resembles Megatron's original gun mode. Both can be combined into a large two handed cannon.

{{-}}

==''Block Wars''==
*'''Optimus Prime''' (2016)
**''Number:'' '''1'''

:Part of [[Kabaya]]'s ''[[Transformers Block Wars]]'' candy toy line, this Optimus Prime kit is surprisingly, based on his [[Optimus Prime (G1)/toys#Cyber Series|Cyber Series Commander toy]]. Molded in red, blue, and yellow plastic with detailing from stickers, he transforms into a truck when finished and is armed with a two-pronged spear. He can also be taken apart and combined with ''Block Wars'' [[Bumblebee (G1)/toys#Block Wars|Bumblebee]], [[Megatron (G1)/merchandise#Block Wars|Megatron]] and [[Starscream (G1)/toys#Block Wars|Starscream]] in various configurations, the ones involving Prime shown on the packaging being:

:*Giving Prime Starscream's wings as a jetpack and arming him with Megatron's cannon.
:*Placing Megatron's turret on Prime's truck mode.
:*Giving Bumblebee Prime's spear, Megatron's arms and Starscream's wings.
:*Attaching Prime and Starscream's legs to Megatron's vehicle mode to create a walking tank.
:*Powering Starscream up by attaching Prime's spear to his back and giving him Bumblebee's weapons.
:*Combining all four into an unnamed combiner, with Optimus Prime forming the torso and upper legs.

==''Transformers Figure Collection''==
[[File:TF-Transformers-Figure-Collection-Optimus-Prime-Decoy.jpg|thumb]]
*'''Convoy''' (01-2016)

:Standing 42mm tall, ''Transformers Figure Collection'' Optimus Prime is a non-poseable soft-rubber figure greatly based on a [[Decoy (G1)|Decoy]] figure.

{{-}}

==''Hero of Steel''==
[[File:HeroofSteel Convoy.jpg|thumb|upright=1.11]]
*'''Convoy''' (2016)
**''Accessories:'' Ion blaster

:Produced by Alpha Max, ''Hero of Steel'' Convoy is a stylized, non-transforming figure standing at 9 inches/23 cm tall. He comes with his ion blaster.

{{-}}

==Bitfig==
[[File:Bitfig-Part-1.jpg|thumb|]]
*'''Convoy''' (12-2016)
Part of the first wave of Transformers Bitfig capsule toys by [[TakaraTomy A.R.T.S]],
Convoy's design is inspired by his appearance in the G1 cartoon, and is articulated at the neck and shoulders.
Bitfig toys were packaged in capsules color coded to the toy they contained.
{{-}}

==Prime 1 Studio==
===''Premium Masterline''===
[[File:TF-Premium-Masterline-PMTF-01-Optimus-Prime.jpg|upright=1.55|thumb|"Just in case you want to say "''I should've looked like this in the movies''", yes, I heard you."]]
*'''Optimus Prime''' (2017)
**''ID Number'': '''PMTF-01''' / '''01EX''' (exclusive)
**''Accessories'': Base, Fusion axe (exclusive), Energy axe (exclusive)

:One of the very first releases of the ''Premium Masterline'' series by [[Prime 1 Studio]], this Optimus Prime is a ''massive'' non-transforming statue based on his Generation 1 appearance with a blend of live-action film aesthetic, and features light-up LED eyes. The statue was also designed by [[Josh Nizzi]] himself. If customers had purchased the statue at [https://www.sideshowtoy.com/collectibles/transformers-optimus-prime-transformers-generation-1-prime-1-studio-9027641/ Sideshow's website], they would receive exclusive Energy and Fusion axes, which can be used to replace Prime's Ion Blaster-holding hand. The standard version was limited to 1500 pieces, while the exclusive version was limited to 750 pieces.

:This statue was later redecoed as [[Nemesis Prime (G1)#Prime 1 Studio|Nemesis Prime]] and [[Ultra Magnus (G1)/merchandise#Prime 1 Studio|Ultra Magnus]]. The statue's model also served as an inspiration to [[Optimus Prime (Movie)|Movie Optimus Prime]]'s appearance in the ''[[Bumblebee (film)|Bumblebee]]'' film.

{{-}}{{anchor|P1SGold}}
[[File:TF-Premium-Masterline-PMTF-01GL-Optimus-Prime-Gold-Edition.jpg|upright=1.55|thumb]]
*'''Optimus Prime Gold Version''' (2018)
**''ID Number'': '''PMTF-01GL'''
**''Accessories'': Base, Fusion axe

:Limited to 500 pieces, Optimus Prime Gold Version is a redeco of the statue above, evoking his Electrum-coated appearance in the Generation 1 episode "[[The Golden Lagoon (episode)|The Golden Lagoon]]". He also comes with a Fusion axe accessory that can replace his Ion Blaster hand.

{{-}}
===''Age of Time''===
[[File:Prime 1 Studio Superior Optimus Prime.jpg|upright=1.55|thumb]]
*'''Superior Optimus Prime''' (<s>201?</s>)

:''Age of Time'' Superior Optimus Prime was designed to be the "ultimate amalgamation" between G1 and movie Optimus Primes. He would have come with two blasters and a huge jetpack, specifically taking cues from Prime's combined form with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]''.

:For reasons unknown, this figure was silently canceled.
{{canceledtoy}}

{{-}}
===''Cutie1''===
[[File:Cutie1 Optimus Prime Figure.jpg|upright=1.11|thumb|''Transformers X Coraline'', directed by [[Travis Knight]].]]
*'''Optimus Prime''' (2022)
**''ID Number'': '''No:055'''
**''Accessories'': Stand

:A striking departure from previous Prime 1 Studio offerings, ''Cutie1'' Optimus Prime is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

:He was later redecoed as ''Cutie1'' [[Nemesis Prime (G1)#Cutie1|Nemesis Prime]].

{{anchor|Cutie1keychain}}
*'''Optimus Prime''' (Keychain, 2021)
**''Accessories'': Stand, chain

:Part of a marketing push following the announcement of the figure above, an acrylic keychain of ''Cutie1'' Prime was released, along with other products such as stickers, T-shirts, hand towels and totebags using the design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.

{{-}}{{anchor|P1SWFC}}

===''War for Cybertron Trilogy''===
[[File:Prime-1-Studio-WFC-Optimus-Prime.jpg|upright=1.66|thumb|"Why... have I... been... canceled?"]]
*'''Optimus Prime''' (<s>2022</s>)
**''ID Number'': '''PMTF-05''' / '''05UT''' (Ultimate Version)
**''Accessories'': Base (standard), base with Shockwave (Ultimate Version)

:A statue based on Optimus Prime's appearance in the ''[[Transformers: War for Cybertron Trilogy (cartoon)|War for Cybertron Trilogy]]'' cartoon. The exclusive version includes a defeated [[Shockwave (G1)/toys#Prime 1 Studio|Shockwave]] as part of the statue's base.

:This item was canceled due to the combination of rising production costs and insufficient preorders.
{{canceledtoy}}
{{-}}

==My Busy Books==
[[File:TF-My-Busy-Books-Transformers-Optimus-Prime-figurine.jpg|upright=1.66|thumb]]
*'''Transformers: My Busy Book''' (2017)

:Included with the [[Transformers: My Busy Book|10-page board book]], 12 figurines, and a playmat, Optimus Prime is represented by a pair of small, PVC non-transforming figurines of his robot and his semi-truck alternate mode, based on his [[evergreen]] design. Like most of the land-based vehicle figurines, his wheels do not roll.

:In terms of quality control, the figurines' paint applications can be... shoddy. If you're a collector who prefers to display them, you should resign yourself from buying it or try to [[customizing|customize]] the figures with better paint applications if you have the skills.
{{-}}

==Rubik's Crew==
[[File:Rubiks Crew Optimus.jpg|upright=1.66|thumb]]
*'''Rubik's Crew Game: Transformers Optimus Prime Edition'''<ref>[https://www.hasbro.com/en-us/product/rubik-s-crew-game-transformers-optimus-prime-edition:70976F4B-5056-9047-F52F-5BB6105031BB Rubik's Crew Game: Transformers Optimus Prime at hasbro.com]</ref> (2017)
This [[super deformed]] version of [[Optimus Prime (G1)|Optimus Prime]]'s robot mode has a detachable "Puzzlehead" that functions like the [https://www.rubiks.com/store/puzzles/rubiks-2x2 2x2] [[Rubik's Cube]].
{{-}}
{{-}}
==Fidget Its==
[[File:TF-Fidget-Its-Optimus-Prime.jpg|upright=1.66|thumb|Before time began, there was...the Cube.]]
*'''Optimus Prime''' (Fidget Its, 2017)

:''Fidget Its'' Optimus Prime is a non-transforming cube-shaped figurine, built for for your fidgeting needs! His pair of eyes & his forehead can be pushed like buttons, his right arm can swivel, his rear section can be fiddled like a combination lock dial, and his left arm can be moved up, down, up, and down.

{{-}}

==Hauck==
[[File:Hauck Go Kart Optimus.jpg|upright=1.66|thumb|Everyone wants to ride Optimus.]]
*'''Optimus Prime Go Kart''' (2017)
:Manufactured by [[Hauck toys]], the Optimus Prime go-kart is a small, pedal-operated vehicle for kids aged 4-8 years old. Cast in the image of Optimus (even featuring his head sculpted on the front), the kart features an adjustable seat as well as a brake.
{{-}}

==Colorcasa==
[[File:Gen-Colorcasa Optimus Prime Spoon Fork.jpg|upright=1|thumb|Eating is the right of... yeah you know the gist.]]
*'''3D Children Tableware''' (2017)
:Chinese company Colorcasa released a pair of children-sized cutlery in the form of a cute (though angry-looking) Optimus Prime, one as a spoon and another as a fork. They were branded as ''Generations'' products.
{{-}}

==Threezero==
===Premium===
*'''Optimus Prime - Classic Edition''' (Premium Scale, 2017)
**''Accessories:'' TBA
{{charstubtoys}}
{{-}}
===DLX===
*'''''War for Cybertron Trilogy'' Optimus Prime''' (DLX Scale, 2021)
**''Accessories:'' Ion Blaster, Energon Axe, Energon Shield, 5 pairs of hands, Action Stand
{{charstubtoys}}
{{-}}

===MDLX===
[[File:Threezero-MDLX-Optimus-Prime.jpg|thumb|upright]]
*'''Optimus Prime''' (2022)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)
:[[Threezero]]'s second figure for the MDLX line, this version of Optimus Prime is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Optimus Prime is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and accessories, namely his ion blaster, energon axe and Matrix of Leadership. He comes with a suite of hands in pairs: closed fists, splayed-out relaxed hands, and three different pairs meant to specifically hold each one of the aforementioned accessories. His chest is magnetically attached and as such can store the Matrix when not in use. Optimus also comes with his backpack piece disassembled in package.

:He was redecoed into [[Nemesis Prime (G1)#Threezero|Nemesis Prime]], [[Ultra Magnus (G1)/toys#Threezero|Ultra Magnus]], as well as his [[Optimus Prime (SG)#MDLX|''Shattered Glass'' self]].

:Optimus is [https://www.threezerohk.com/wp-content/uploads/2023/05/MDLX_Transformers_Starscream_17-768x512.jpg compatible] with [[Starscream (G1)/merchandise#Threezero|Starscream]] by way of the latter's wing assembly and head, in reference to "[[Megatron's Master Plan, Part 1]]".

::*''[https://www.threezerohk.com/product/transformers-mdlx-optimus-prime/ More information on MDLX Optimus Prime at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXNewYear}}
*'''Optimus Prime (Year of the Dragon Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:An all-gold {{W|Chinese New Year}} themed redeco of the above figure, featuring dragon patterns across his chest and left arm. According to the product description from Threezero, the right shoulder features the character for "Year of the Dragon" (龍), while his left shoulder features the fifth character (辰) of "Earthly Branches" in traditional Chinese sequencing (地支). Optimus features all the same accessories and functionality as before.

:This figure was limited to 1398 pieces worldwide, revealed in late 2023 and released in February 2024.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-year-of-the-dragon-edition/ More information on MDLX Optimus Prime (Year of the Dragon Edition) at Threezero]''
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXVintage}}
*'''Optimus Prime (Vintage Animation Edition)''' (2024)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:Yet another redeco of Prime, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

:Vintage Animation Edition Prime, [[Megatron (G1)/merchandise#MDLXVintage|Megatron]] and [[Bumblebee (G1)/merchandise#MDLXVintage|Bumblebee]] were revealed in a [https://newsroom.hasbro.com/news-releases/news-release-details/40-years-one-legacy-hasbro-celebrates-transformers-40th press release] from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-vintage-animation-edition/ More information on MDLX Optimus Prime (Vintage Animation Edition) at Threezero]
{{MDLXOptimusPrimeMold}}

{{Anchor|MDLXSleep}}
*'''Optimus Prime (Sleep Mode)''' (2025)
**''Known designers:'' Kelvin Sau
**''Accessories:'' one ion blaster, one energon axe, Matrix of Leadership, five pairs of hands (relaxed, closed, rifle- axe- and Matrix-holding)

:A redeco of Prime in various shades of grey as a callback to his death in [[The Transformers: The Movie]]. All previous accessories and functionality carry over from before.

:This figure was revealed on Threezero's official website on February 2025.

::*''[https://www.threezerohk.com/product/mdlx-optimus-prime-sleep-mode// More information on MDLX Optimus Prime (Sleep Mode) at Threezero]
{{MDLXOptimusPrimeMold}}

==Kidrobot==
[[File:Kidrobot GIJoe Enamel Pin Series.jpg|thumb|250px]]
===Enamel Pin Series===
*'''Optimus Prime''' ([[November 3]], [[2017]])
:*''Rarity:'' 1 in 20
:Released by [[Kidrobot]] in their Enamel Pin Series, this is a flat, enamel pin badge of Optimus Prime inspired by the art of [[Tom Scioli]]'s ''[[Transformers vs. G.I. Joe]]'', albeit with [[Super deformed|cutesy proportions]]. The pin series was [[Blindpacking|blindboxed]], with some pins being rarer than others.
{{--}}

===Vinyl Mini Series===
[[File:Kidrobot GI Joe Optimus Prime mini.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[November 14]], [[2017]])
:*''Rarity:'' 2 in 24
:*''Accessories'': Sword
:The same character design was reused for the Vinyl Mini Series, with Optimus receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. Optimus featured articulation in each shoulder, and also included his [[Minecraft]] voxel sword as first seen in "[[Everybody Hates Metroplex]]".
{{-}}

{{anchor|kidrobotgid}}
[[File:Kidrobot GI Joe Optimus Prime GID mini.jpg|thumb|upright=1]]
*'''Optimus Prime GID''' ([[November 14]], [[2017]])
:*''Rarity:'' 1 in 48
:*''Accessories'': Sword
:Optimus's Vinyl Mini figure was redecoed into "Optimus Prime GID", sharing many of the same paint applications, but now cast entirely out of glow in the dark plastic, more closely representing his apparition to [[Scarlett]] in "[[Headmasters (issue)|Headmasters]]" or his resurrection in "[[The War Never Ends]]". He was one of the rarer, but not the rarest, of the Vinyl Mini Series. His sword is still included.
{{-}}

===Vinyl Keychain Series===
[[File:Kidrobot GI Joe Optimus Prime keychain.jpg|thumb|upright=1]]
*'''Optimus Prime''' ([[December 1]], [[2017]])
:*''Rarity:'' 3 in 24
:Optimus was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation. His sword is also absent.
{{-}}

==Bouncing Ball Heads==
[[File:BouncingBallHead OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2017)
:"Bouncing Ball Head" Optimus Prime is a small, super deformed figurine with a removable head that doubles as a bouncy ball. An Autobot logo is tampographed on the back of his head and his name is written under his feet.

:He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique red color.

:Despite clearly representing Generation 1 characters, the collection is advertised as a 2015 ''[[Transformers: Robots in Disguise (2015 franchise)|Robots in Disguise]]'' product.
{{-}}

==Imaginarium Art==
[[File:ImaginariumOptimusPrime.jpg|upright=1.66|thumb|Brings new meaning to "no matter the cost."]]
*'''Optimus Prime''' (2017)

:[[Imaginarium Art]]'s first statue of Optimus Prime stands 24 inches tall and features multiple [[Light-emitting diode|LED]]s, two varieties of his laser rifle, and his energy axe. The statue's chestplate can open, revealing the Matrix of Leadership.

:The sculpted base for this figure also features the Combat Deck and Roller. Only 500 of this item were produced.
{{-}}

*'''Optimus Prime''' (2018)

:The "Legacy of Cybertron" statue is 12 inches tall, and its base can be connected to other statues in that series to produce a larger battle scene. 600 were produced.
{{-}}

==''Keshi Surprise''==
*'''Autobots''' (2018)

:The ''[[Keshi Surprise]]'' series by [[Super7]] consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980s [[Decoy (G1)|Decoy]]s. These [[blindpacking|blind-packed]] figures were sold individually or in cases depicting only their faction. Optimus Prime was available in red, yellow, blue, and purple, and included a foil trading card / sticker.
{{-}}
==Forever Clever==
{{anchor|Jumbochalk}}
*'''4 Pack Jumbo Chalk Set''' (2018)
:Released by [[Forever Clever]], the 4 Pack Jumbo Chalk Set includes a chalk holder featuring Optimus Prime. He's bundled with chalk holders of [[Megatron (G1)/merchandise#Jumbochalk|Megatron]], [[Bumblebee (G1)/merchandise#Jumbochalk|Bumblebee]] and [[Soundwave (G1)/merchandise#Jumbochalk|Soundwave]], and 4 pieces of appropriately colored chalk.
{{anchor|shapechalk}}
*'''5 Pack Shaped Chalk''' (2019)
:A piece of blue chalk formed into the shape of Optimus Prime. Bundled with [[Megatron (G1)/merchandise#shapechalk|Megatron]], [[Bumblebee (G1)/merchandise#shapechalk|Bumblebee]], [[Starscream (G1)/merchandise#shapechalk|Starscream]] and [[Windblade (G1)#shapechalk|Windblade]].
{{anchor|WallWalker}}
*'''Wall Walkers Optimus Prime''' (2018)
:Exclusively released in [[Blindpacking|blind bags]], ''Wall Walkers'' Optimus Prime has suction cups on its hands and feet so it can stick to walls. All its details are printed on, and besides its colors and printing, it is identical to the other Wall Walkers toys.
{{anchor|MiniWalker}}
[[File:MysteryMiniWalkers.jpg|upright=1|thumb]]
*'''Mystery Mini Walkers Optimus Prime''' (2021)
:Also a blind bag exclusive, ''Mystery Mini Walkers'' Optimus Prime is an eraser-like figure with movable arms and legs and printed-on details.
{{-}}
{{anchor|PBRoptimus}}
[[File:TF Authentics 2023 Pull-Back Racers Optimus Prime.jpg|upright=1|thumb|Up top!]]
*'''Pull-Back Racers Optimus Prime''' ([[2023]])
:This toy is a non-transforming rendition of Optimus Prime in a super-deformed rendition of his vehicle mode, albeit with his robot mode head and left arm sticking out of it. As the title suggests, this toy has a pull-back motor that will propel the toy forwards after being pulled back considerably enough.
{{-}}
{{anchor|ClipCharms}}
[[File:ForeverCleverClipCharms.jpg|upright=1|thumb]]
*'''Clip Charms Optimus Prime''' (2024)
:Released in blind bags, ''Clip Charms'' features a keychain of Optimus Prime's face with his name written beside it.
{{-}}
{{anchor|KeyBlasters}}
*'''Key Blasters''' (2024)
:A toy car released as part of the ''Key Blasters'' series prominently features Optimus Prime on its side and hood, with his name written on top in [[Alphabet#Autobot_script|Ancient Autobot]] script. A key is included. When it is inserted into the car, pushing the button on the key will propel the car forward. It was sold in a two-pack with a [[Starscream (G1)/merchandise#KeyBlasters|Starscream]] themed car.

===Squeezelings===
*'''Optimus Prime''' (Series 1, 2022)
:''[[Squeezelings]]'' Optimus Prime is a [[super deformed]], non-posable figure made of soft plastic and holding his ion blaster, released by [[Forever Clever]]. He was released in [[blindpacking|blind bags]] and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

{{-}}{{anchor|SqueezelingsBlackout}}
*'''Blackout Color Mode Optimus Prime''' (2022)
:A [[black redeco]] of the previous Optimus Prime figure. It was exclusive to an 8-figure gift set, featuring [[Optimus Prime (G1)/merchandise#Squeezelings|Optimus Prime]], [[Bumblebee (G1)/merchandise#Squeezelings|Bumblebee]], [[Starscream (G1)/merchandise#Squeezelings|Starscream]], [[Megatron (G1)/merchandise#Squeezelings|Megatron]], and Blackout Color Mode versions of the three other characters.

{{-}}{{anchor|Squeezelings2}}
*'''Optimus Prime''' (Series 2, 2023)

:A figure of Optimus Prime in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongside [[Bumblebee (G1)/merchandise#Squeezelings2|Bumblebee]], [[Megatron (G1)/merchandise#Squeezelings2|Megatron]] and [[Optimus Primal (BW)/toys#Squeezelings|Optimus Primal]], in blind bags, or on blister card individually. It was later rereleased as part of the Squeezelings Sidekicks line, bundled with a comic book.

==''Transformers Trading Card Game''==
[[File:W1SOptimusPrimeAL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Autobot Leader''' (2018)
**'''Wave 1S: Starter Set'''
**''Rarity: '''''RT'''
**''Card Number: '''''T03/T04'''
**''Stars: ''7
:Optimus Prime, Autobot Leader is one of four double-sided character cards available in the ''[[Transformers Trading Card Game]]'' Starter Set.

:The artwork for the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile card game.
{{-}}
[[File:W1OptimusPrimeBL.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2018)
**'''Wave 1'''
**''Rarity: '''''RT'''
**''Card Number: '''''T29/T40'''
**''Stars: ''13
:Optimus Prime, Battlefield Legend is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The card's Bot Mode line-art was done by [[Guido Guidi]], and Alt Mode line-art by [[Marcelo Matere]] and Alt Mode colors by [[Sara Pitre-Durocher]].

{{-}}
[[File:W1OptimusPrimeFF.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Freedom Fighter''' (2018)
**'''Wave 1'''
**''Rarity: '''''CT'''
**''Card Number: '''''T30/T40'''
**''Stars: ''12
:Optimus Prime, Freedom Fighter is one of forty double-sided character cards available in Wave 1 of the ''[[Transformers Trading Card Game]]''.

:The Alt Mode artwork on the card is reused from the ''[[Transformers Legends (mobile game)|Transformers Legends]]'' mobile game, while the Bot-mode features line-art by [[Marcelo Matere]] and colors by [[Sara Pitre-Durocher]].
{{-}}
[[File:W2OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Gleaming Commander''' (2019)
**'''Wave 2: Rise of the Combiners'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''11

:Optimus Prime, Gleaming Commander was released as part of the ''[[Transformers Trading Card Game]]'' Wave 2: Rise of the Combiners. Like all other members of [[combiner]] teams released in the set, This version of Optimus Prime is a folding card, with the Bot and Alt modes being depicted when the card is folded in half, and a holofoil portion of the the combined mode depicted when unfolded. The reverse of Optimus Prime, Gleaming Commander depicts the center right portion of [[Optimus Maximus (G1)|Optimus Maximus']], of whom Optimus Prime forms the torso and head.

:The artwork for Bot Mode is reused from the [[Combiner Wars (franchise)|Combiner Wars]] Battle Core Optimus Prime toy's packaging art.

:Optimus Prime, Gleaming Commander can be used to form Optimus Maximus, Ultimate Defender with the use of the Action card [[Enigma of Combination|Sentinel Enigma]] while he and the other Wave 2 Sentinels are in Bot mode on the battlefield and/or KO area.
{{-}}
[[File:W3GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Infantry-Leader''' (2019)
**'''Wave 3: War for Cybertron: Siege I'''
**''Rarity: '''''RT'''
**''Card Number: '''''T07/T48'''
**''Stars: ''11
:General Optimus Prime, Infantry-Leader is one of forty-eight double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege I.

:The card's artwork is based on the ''[[War for Cybertron: Siege|Siege]]'' Voyager-class Optimus Prime toy, with the Bot Mode artwork being reused from the toy's packaging art.
{{-}}
[[File:W4GeneralOptimusPrime.jpg|thumb|upright=1.66]]
*'''General Optimus Prime, Galactic Commander''' (2019)
**'''Wave 4: War for Cybertron: Siege II'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T06/T52'''
**''Stars: ''15

:General Optimus Prime, Galactic Commander is one of fifty-two double-sided character cards available in Wave 3 of the ''[[Transformers Trading Card Game]]'', War for Cybertron: Siege II.

:The card's artwork is based on the ''Siege'' Leader-class Galaxy Upgrade Optimus Prime toy, which in turn is based on the ''[[Transformers: Cybertron (franchise)|Cybertron]]'' version of Optimus Prime. The Bot Mode artwork is reused from said toy's packaging art, while Alt Mode received new art (lines by [[Marcelo Matere]] and colors by [[Volta]]).
{{-}}
[[File:EEOptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Battlefield Legend''' (2019)
**'''Wave 1: Energon Edition'''
**''Rarity: '''''SRT'''
**''Card Number: '''''T205/T06'''
**''Stars: ''13

:Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Optimus Prime, Battlefield Legend. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art by [[Marcelo Matere]]
{{-}}
[[File:W5OptimusPrime.jpg|thumb|upright=1.66]]
*'''Optimus Prime, Legendary Warrior''' (2020)
**'''Wave 5: Titan Masters Attack'''
**''Rarity: '''''UT'''
**''Card Number: '''''T32/T46'''
**''Stars: ''12

:Optimus Prime, Legendary Warrior is one of forty-six double sided character cards released as part of Wave 5 of the ''[[Transformers Trading Card Game]]'', Titans Masters Attack. As a character with a body mode, Optimus Prime begins the game with a Titan Master attached in head mode. Once Optimus Prime is KO'd, said Titan Master is deployed.

:The card's artwork is based on the ''Titans Return'' Leader-class Powermaster Optimus Prime toy, with the body mode artwork being reused from the toy's packaging art.

:This card's set was originally set for an April 2020 release, however due to the global COVID-19 pandemic the release was pushed back to May 29, 2020.
{{-}}

==''Magic: The Gathering''==
[[File:MTG-Optimus-Inspiring-Leader.jpg|thumb|upright=1.66|Go ahead, turn me to my other face, see the rules nightmare that happens.]]
*'''Optimus Prime, Inspiring Leader''' (2018)
**''ID number:'' '''002/004'''
**''Set code:'' '''H18'''
**''Color identity:'' '''Red/White'''
**''Casting cost:'' '''{3}{R}{W}'''
**''Artist:'' [[Steve Argyle]]
:Part of the ''[[mtg:Heroes of the Realm|Heroes of the Realm]]'' series of commemorative cards, made by Wizards of the Coast for their employees as rewards for work on specific projects,<ref>[https://www.youtube.com/watch?v=4WNBRWoHq9E Gavin Verhey from Wizards of the Coast explains Heroes of the Realm]</ref> the 2018 "Optimus Prime, Inspiring Leader" card was given to the team behind the ''[[Transformers Trading Card Game]]''. Uniquely, Optimus Prime is "triple-faced" card: a ''Magic'' card on the front side, a ''Transformers Trading Card Game'' card representing Optimus in his alternate mode on the opposite side, and an oversized ''Transformers Trading Card Game'' card representing Optimus in robot mode found by unfolding the card.
:Optimus has the ability to change any permanent (card on the battlefield) to its other face, though sadly that doesn't mean he could convert ''himself'' into a ''Transformers Trading Card Game'' card during a ''Magic: The Gathering'' game.<ref>[https://www.reddit.com/r/magicTCG/comments/e5ovx5/heroes_of_the_realm_promo_optimus_prime_inspiring/ Post by u/Wizards_Drew] on [https://www.reddit.com/r/magicTCG/ r/magicTCG] on Reddit</ref>
:As with all ''Heroes of the Realm'' cards, "Optimus Prime, Inspiring Leader" is not legal to play in any format beyond a specific Commander rule; the cards are novelties designed to be read, rather than played.<ref>[https://markrosewater.tumblr.com/post/189543247703/hi-mark-i-have-2-questions-1-what-are-the Mark Rosewater on Tumblr]: "There’s no plans to release the Heroes of the Realm. The cards aren’t designed to be played. They’re designed to be read."</ref>
{{-}}
{{anchor|MTGHero}}
[[File:MTG-Optimus-Prime.jpg|thumb|upright=1.66|Transform and tap out!]]
*'''Optimus Prime, Hero / Optimus Prime, Autobot Leader''' (2022)
**''ID number:'' '''013/015'''
**''Set code:'' '''BOT'''
**''Color identity:'' '''Blue/Red/White'''
**''Casting cost:'' '''{3}{U}{R}{W}''' (front), '''{2}{R}{W}{B}''' (back with "More Than Meets the Eye")

:"Optimus Prime, Hero" is part of the 2022 ''[[Magic: The Gathering]]'' ''[[mtg:Universes Beyond|Universes Beyond]]'' ''[[mtg:Transformers|Transformers]]'' card set, found in Set Booster and Collector Booster packs of ''Magic''<nowiki>'s</nowiki> ''[[mtg:The Brothers' War|The Brothers' War]]'' set. It can be reversed to become "Optimus Prime, Autobot Leader", representing Optimus in vehicle mode. True to his character, he supports his allies with the "Bolster" mechanic and can return to the battlefield should he [[The many deaths of Optimus Prime|die]] in his Artifact Creature form.
:A variant of this card was available solely in Collector Booster packs, depicting [[Optimus Prime (SG)#Magic: The Gathering|''Shattered Glass'' Optimus Prime]].
{{-}}
{{anchor|MTGSLD}}
[[File:MTG-SLD-Optimus.jpg|thumb|upright=1.66|[[w:Golem|On sale just in time for Hanukkah]].]]
*'''Optimus Prime''' ''(Darksteel Colossus)'' (2022)
**''ID number:'' '''1081'''
**''Set code:'' '''SLD'''
**''Color identity:'' '''Colorless'''
**''Casting cost:'' '''{11}'''

:"Optimus Prime" is part of the ''[[Magic: The Gathering]]'' card pack ''Transformers: Optimus Prime vs. Megatron'', part of the ''[[mtg:Secret Lair|Secret Lair Drop Series]]'' ''[[mtg:Secret Lair Drop Series: December Superdrop 2022|December Superdrop 2022]]'' set. It was available exclusively from [https://secretlair.wizards.com secretlair.wizards.com] from [[December 5]], [[2022]] through [[January 6]], [[2023]].
:Optimus Prime is a [[mtg:Skinned card|reskin]] of the existing ''Magic'' card [https://scryfall.com/card/dst/109/darksteel-colossus Darksteel Colossus], using the same rules and counting as it for all gameplay purposes. Befitting the mighty leader of the Autobots, Optimus is incredibly powerful and impossible to destroy normally, but consequently has a very high casting cost. While the card has printing on both faces, depicting Optimus in robot mode and vehicle mode respectively, both have the same printed abilities and count as a single card for rules purposes—just choose which side you want to display when he enters the battlefield.
: The ''Optimus Prime vs. Megatron'' set also includes [[Megatron (G1)/merchandise#MTGSLD|Megatron]], [[AllSpark#Magic: The Gathering|The AllSpark]], and the bonus card [[Cybertron (planet)|Cybertron]].

{{--}}

==Flame Toys==

===Kuro Kara Kuri===
[[File:FlameToys-KuroKaraKuri-04-OptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (December 2019)
**''Number:'' '''04'''
**''Accessories:'' Large sword, stone, Swords (2), Large axe, Small axe (2), Ion cannon, pairs of hands (5), additional faces (2), Big Turbo Jet Axe with set of hands (exclusive),
**''Sculptor'': Chemical Attack
**''Painting'': Decomas Lab (Hiroyuki Hirose]

:Part of [[Flame Toys]]' ''Kuro Kara Kuri'' line of high-end, non-transforming action figures, Optimus Prime is an original design, though one that bears many similarities to the Don Figueroa design from [[IDW Publishing|IDW's]] ''The Transformers'' vol. 1. He has lots of die cast and LEDs in his head, chest matrix chamber, and both knees. He comes with a multitude of accessories, including a very large sword that can be plugged into a stone, two smaller swords resembling handheld versions of those used by the [[Optimus Prime (Movie)|live-action movie Optimus Prime]], a pair of hatchets resembling those of [[Optimus Prime (Animated)|''Animated'' Optimus Prime]], and of course G1 Optimus Prime's iconic Ion cannon. He also comes with an Orion Pax visorless alternative face, a battle damaged addition face, and five alternative pairs of hands in different poses.
:If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a very large Turbo Jet Axe.
:The reissue (which is labelled as such on the box) uses a slightly different red paint and is the recommended release for use with the Jet Power Armor (see below) due to the paint's extra durability.

{{-}}{{anchor|FlameToysBlackJetPower}}
[[File:FlameToys-KuroKaraKuri-OptimusPrimeJetPowerArmor.jpg|upright=1.66|thumb|And you thought the previous figure was expensive...]]

*'''Optimus Prime Jet Power Armor''' (January [[2024]])
**''Number:'' '''13'''
**''Accessories:'' ''everything...'', Blaster Cannon (exclusive)
**''Sculptor'': Chemical Attack
**''Coloring'': Masashi Watanabe

:Optimus Prime Jet Power Armor is a collection of 23 armour pieces that combine with the previously released ''Kuro Kara Kuri'' Optimus Prime similar to how he combined with [[Jetfire (Movie)|Jetfire]] in ''[[Transformers: Revenge of the Fallen (film)|Revenge of the Fallen]]'' which doubles the size of the figure. If purchased via D4toys.com, SEN-TI-DEN Hong Kong, or events attended by Flame Toys, he also includes a blaster cannon.
:As mentioned above, due to addition paint durability, it is recommended to use the re-release of Optimus Prime.

{{-}}

===Furai Model===
[[File:FlameToys-FuraiModel-01-OptimusPrimeAttackMode.jpg|upright=1.66|thumb|'''''X-treme!''''']]
*'''Optimus Prime (Attack Mode)''' (September 2018)
**''Number:'' '''01'''
**''Accessories:'' Ion cannon, axe, 4 hands
{{toydesigner|[[Akira Amemiya]] (concept artist)}}

:Released as part of the ''Furai Model'' line by [[Flame Toys]], "Optimus Prime (Attack Mode)" is an articulated, non-transforming, Voyager Class-sized {{w|Gunpla}}-style model kit. Using parts made of hard ABS plastic and some polycaps, Optimus Prime (Attack Mode) is an original design created by Flame Toys in collaboration with [[Akira Amemiya]] of [[Studio Trigger]].

:For straight-assembly builders, Optimus Prime features a sheet of foil stickers for detail (notably the shoulder insignias), though the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers like ''Gundam Markers'' can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.

:This model kit was later [[redeco]]ed as [[Nemesis Prime (G1)#Flame Toys|Nemesis Prime (Attack Mode)]] and [[Optimus Prime (SG)#Flame Toys|Shattered Glass Optimus Prime (Attack Mode)]].

{{-}}{{anchor|Furai03}}
[[File:FlameToys-FuraiModel-03-OptimusPrimeIDW.jpg|upright=1.66|thumb]]
*'''Optimus Prime (IDW ver.)''' (March 2019)
**''Number:'' '''03'''
**''Accessories:'' Ion cannon, 4 hands
:Optimus Prime (IDW) is a plastic model kit based off of the Optimus Prime design created by [[Don Figueroa]] for [[IDW Publishing]]'s [[The Transformers (IDW)|2009-2011 ''The Transformers'' comic series]]. Similarly to the previous model kit, IDW Optimus is also Voyager-sized.
:This model kit was later redecoed as [[Nemesis Prime (G1)#Furai08|Nemesis Prime (IDW ver.)]] and [[Ultra Magnus (G1)/merchandise#Flame Toys|Ultra Magnus (IDW ver.)]], and it's also used to make the pre-built Furai Action figure (see below.)

{{-}}{{anchor|Furai12}}
[[File:FuraiG1Optimus.jpg|upright=1.66|thumb]]
*'''Optimus Prime (G1 ver.)''' (April 2020)
**''Number:'' '''12'''
**''Accessories:'' Ion cannon, 10 hands, axe
:Optimus Prime (G1) is another plastic model kit, this time a heavily stylized rendition of his cartoon appearance. Like the previous releases, he stands at an approximate Voyager height. He features opening chest windows which reveal sculpted detail of the [[Matrix of Leadership]].

{{-}}{{anchor|Furai16}}
*'''Optimus Prime IDW (Clear ver.)''' (August 2020)
**''Number:'' '''16'''
{{toystub}}

{{-}}
*'''Optimus Prime''' (20??)
:Part of the ''"Deformer Model Kit"'' subline of the ''Furai Model'' line, this Optimus Prime model is a cutesy, "[[super deformed]]" take on the Autobot leader.
{{comingsoontoy}}

===Furai Action===
[[File:FlameToys-FuraiAction-OptimusPrimeIDW.jpg|thumb|Just like one of those second-hand pre-built Gunplas you've seen in Akibahara!]]
*'''Optimus Prime (IDW ver.)''' (January 2020)
**''Accessories'': Ion cannon, 4 hands

:''Furai Action'' Optimus Prime is a pre-assembled redeco of the second ''Furai Model'' kit, with the weathering effects painted on.

{{-}}

==''Playskool Friends''==
[[File:Playskool-Friends-TF-Optimus-Prime.jpg|upright=1.88|thumb|A mouth on his mouthplate? That's a new one.]]
*'''Transformers Collector Pack''' (Canceled)

:Intended to be released as part of the 7-pack for the Playskool Friends lineup, this Optimus Prime is a very adorable non-transforming figurine. He was to come packed with Bumblebee, Arcee, and 4 Rescue Bots: Heatwave, Chase, Boulder and Blades.

:Given the inclusion of the four Rescue Bots, it was ''probably'' unclear if this Optimus Prime is meant to represent his ''Generation 1'' counterpart or his ''[[Optimus Prime (WFC)|Aligned]]'' counterpart.

{{canceledtoy}}

{{-}}

==''Uglydolls''==
[[File:Uglydolls plush collab.jpg|250px|thumb]]
*'''Ox as Optimus Prime''' (2018)
:A collaboration with ''[[Uglydolls]]'' for the 2018 San Diego Comic-Con, the character Ox is dressed as Optimus Prime. He is a limited run exclusive plush, along with Ice-Bat as [[Bumblebee (G1)/merchandise|Bumblebee]].
{{--}}

==McDonald's==
[[File:2018-McD-Authentics-Bumblebee-Optimus-Prime.jpg|250px|thumb]]
*'''Optimus Prime with a sword'''{{sic}} (Happy Meal Toy, 2018)
:Released as part of the [[McDonald's]] June 2018 Happy Meal Toys along with [[My Little Pony]], this Optimus Prime is a super-deformed figurine, and he features a gimmick on his left arm, which can be swung down to reveal a pop-out sword with the press of a button on his back. The sword can be retracted manually by raising the arm.

:The toy was available in South Korea, Italy, Russia, and Malaysia. This toy was rereleased in the US as [[Optimus Prime (Movie)/merchandise#McDonald's 2|Optimus Prime]] for the ''[[Bumblebee (franchise)|Bumblebee]]'' promotion. In Malaysia, this toy is one of the few items that can be found in several hobby toy shops.

{{-}}

==Jada Toys==
===''Metals Die Cast / Hollywood Rides''===
[[File:JadaHollywoodRidesG1OptimusPrime1-24.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2018)
:Released by [[Jada Toys]], this 1/24 scaled non-transforming die-cast truck with rubber tires is based on Optimus Prime's original form and features opening doors to reveal a highly detailed interior with a chromed steering wheel. Similar to the ''[[Robot Powered Machines#Mini-Vehicles|Robot Powered Machines]]'', the truck features a sculpted robot mode underneath. His smokestacks are ''insanely'' long.

:This mold was later redecoed as [[Nemesis Prime (G1)#Jada Toys|Nemesis Prime]].

{{-}}{{anchor|Jada1-32}}
[[File:JadaHollywoodRidesG1OptimusPrime1-32.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2018)
:A medium-sized replica of Optimus Prime much similar to the version above, but with shortened smokestacks. Unlike most other 1/32 vehicles, Optimus does not feature any opening doors, but still retains the sculpted robot mode on his chassis.

{{-}}{{anchor|JadaOP3pack}}
[[File:Jada 1-32 Optimus Prime 3pk.jpg|upright=1.44|thumb]]
*'''Western Star 5700XE Optimus Prime / Optimus Prime / Autobot Optimus Prime''' (Scale 1/32 Die Cast Vehicle 3‑pack, 2022)
:The 1/32 version of Generation 1 Optimus Prime was rereleased in a 3-pack alongside his [[Optimus Prime (Movie)/merchandise#JadaOP3pack|2007 and ''The Last Knight'']] counterparts, neither featuring any notable changes.

{{-}}{{anchor|JadaGhost124}}
*'''Optimus Prime''' (Scale 1/24 Die Cast Vehicle, 2024)
:A redeco of the 1/24 scaled replica above, this Optimus Prime was released in a crossover with the ''[[Ghostbusters]]'' franchise and is mostly based on the [[Optimus Prime (G1)/Generations toys#Collaborative|MP-10G Optimus Prime Ecto-35 Edition]] figure from the ''[[Transformers Collaborative|Collaborative]]'' toyline, itself based on the original [[Ecto-1]] color scheme, with the addition of some green ghost splatter between the front bumper and the left wheel. Instead of Autobot insignias, this version features the Ghostbusters logo on both sides and the back of the cab, as well as under the chassis right above his robot mode sculpture.

{{-}}{{anchor|JadaGhost132}}
*'''Optimus Prime''' (Scale 1/32 Die Cast Vehicle, 2024)
:This version of Optimus Prime is a redeco of the 1/32 scaled replica in the same Ghostbusters-inspired deco of the 1/24 version above. The only noticeable difference in colors is the lack of green on its headlights.

===''Metalfigs''===
[[File:JadaMetalfigsG1OptimusPrime.jpg|upright=1.44|thumb]]
*'''Optimus Prime''' (4" Die Cast Figure, 2020)
**''Accessories'': Ion blaster, Energon-axe
:''Metalfigs'' Optimus Prime is a 4-inch tall non-transforming super deformed die-cast figure with three points of articulation and light-up eyes.

:He comes with his signature ion blaster and Energon-axe weapons as accessories.

{{-}}{{anchor|DioramaScene}}
[[File:JadaMetalfigsG1DioramaScene.jpg|upright=1.44|thumb]]
*'''Diorama Scene''' (2 3/4" Die Cast Figure 4-pack, 2020)
**''Accessories'': Display backdrop
:A static die-cast figurine of Optimus Prime measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongside [[Bumblebee (G1)/merchandise#DioramaScene|Bumblebee]], [[Starscream (G1)/merchandise#Jada Toys|Starscream]] and [[Megatron (G1)/merchandise#Jada Toys|Megatron]].

:The packaging backdrop can be used as an additional display piece for the set.

{{-}}{{anchor|Metalfigs4pack}}
*'''Optimus Prime / Bumblebee / Optimus Primal / Megatron''' (2 3/4" Die Cast Figure 4-pack, 2022)
:This static Optimus Prime figurine is directly designed after the 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongside [[Bumblebee (G1)/merchandise#Metalfigs4pack|Bumblebee]], [[Optimus Primal (BW)/toys#Metalfigs|Optimus Primal]] and [[Megatron (G1)/merchandise#Metalfigs4pack|Megatron]].

{{-}}{{anchor|Metalfigssingle}}
*'''Optimus Prime''' (2 3/4" Die Cast Figure, 2023)
:The same super deformed Optimus Prime from the 4-pack above is also available in individual packaging.
{{-}}

===''Nano Hollywood Rides''===
[[File:JadaNanoHollywoodRidesG13pack.jpg|upright=1.44|thumb]]
*'''Starscream / Volkswagen Beetle Bumblebee / Optimus Prime''' (1.65" Die Cast Vehicle 3-pack, 2020)
:''Nano Hollywood Rides'' Optimus Prime is a small non-transforming die-cast truck measuring approximately 1.65 inches long. He was released in a 3-pack alongside [[Starscream (G1)/merchandise#Nano Hollywood Rides|Starscream]] and [[Bumblebee (G1)/merchandise#Nano Hollywood Rides|Bumblebee]]. Unfortunately, he doesn't feature a sculpted robot mode underneath like most other Jada vehicles do.
{{-}}

===''Nano Metalfigs''===
[[File:JadaNanoMetalfigsG1-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 1 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:''Nano Metalfigs'' Series 1 Optimus Prime is an incredibly small die-cast figurine molded holding his blaster. He has a little base attached to his feet for balancing reasons.

:He comes in an impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]]. This mold was later redecoed as [[Nemesis Prime (G1)#Nano Metalfigs|Nemesis Prime]] in the Series 2 18-pack.

{{-}}{{anchor|NanoMetalfigs2}}
[[File:JadaNanoMetalfigsSeries2G1BW-18pack.jpg|upright=1.44|thumb]]
*'''Transformers Series 2 18-pack''' (4 cm Die Cast Figure Multipack, 2022)
:A second ''Nano Metalfigs'' Optimus Prime was released in Series 2, now wielding his Energon axe instead of his blaster and doing a bit more of an action pose.

:He comes in ''another'' impressive multipack with [[Jada Toys#Nano Metalfigs|seventeen other figurines]].

{{-}}{{anchor|NanoMetalfigs3}}
*'''Transformers Series 3 18-pack''' (4 cm Die Cast Figure Multipack, 2023)
:For the [[Jada Toys#Nano Metalfigs|third ''Nano Metalfigs'' multipack]], two Optimus Primes were made available at once. One is a re-release of the axe-wielding Series 2 figurine with no noticeable changes, and the other is a golden redeco of the blaster-holding Series 1 figurine.
{{-}}

===Converting RC Vehicle===
[[File:JadaConvertingOptimusPrime.jpg|upright=1.44|thumb|"We have [[Optimus Prime (G1)/toys#Robosen Collector's Edition|Robosen's Optimus Prime]] at home."]]
*'''Optimus Prime Converting R/C''' (2022)
**''Accessories:'' Remote controller
:This Optimus Prime is a remote controlled figure capable of automatically converting between robot mode and truck mode on command.

:He measures approximately 13 inches tall in robot mode and 12 inches long in truck mode, and features lights, sounds and voices.

{{--}}

==''ReAction''==
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2020, 2024)}}</ul>
:*''Accessories'': Ion Blaster

: Released in [[Super7]]'s line of multi-property 3.75-inch action figures, ''[[Super7#ReAction|ReAction]]'' Optimus Prime was naturally part of the first wave of ''Transformers'' figures. It is a non-converting action figure with 5 points of articulation (simple swivel shoulders, legs, and neck) and an [[Ion blaster]] accessory he can only hold in his right hand.

: It should be noted that despite being a "retro-styled" figure, the hard-plastic points on his helmet are very accurate to the animation model and therefore ''incredibly'' pointy, like, "would not be allowed on a toy for the 5-13 set" pointy.

: As with all releases in the ''ReAction'' toyline, Optimus comes packaged in a small cardback that emulates the nostalgic packaging style of [[Kenner]] ''[[Star Wars (franchise)|Star Wars]]'' action figures of the late 1970s to early '80s.

: In late 2024, this figure was reissued with no obvious changes, now in a [[blindpacking|blindpacked]] box assortment.

{{-}}{{anchor|ReActionCyberchrome}}
<ul class="iconlist">{{Bp-a1|'''Cyberchrome Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: This version of the Optimus ''ReAction'' figure features glossy metallic paint. That's about it. Whee.

: This figure was a [[Target]] exclusive in the US, released alongside the "[[Megatron (G1)/merchandise#ReActionCyberchrome|Cyberchrome Megatron]]" figure.

{{-}}{{anchor|ReActionFallenWave4}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: Released in the fourth wave of ''ReAction'', this all-gray version of Optimus features a new torso tooling with open chest panels revealing a (non-removable) Matrix of Leadership.

: This is the first of ''three'' different figures of the same concept to be sold under the name "Fallen Leader Optimus Prime"; the other two (below) are [[Target]] exclusives.

: This figure was initially solicited to retailers as "Dead Optimus Prime" before the slightly gentler name change... but "Dead Optimus Prime" is still what the figure is labeled on the cardback checklist as of wave 6.

{{-}}{{anchor|ReActionSanta}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Christmas]]-themed redeco, "Optimus Santa" features a red and green color scheme, a tufted Santa cap, and his ion blaster is striped to resemble a candy cane.

: This figure is a "shared exclusive" between, multiple online outlets. The card still refers to him as just "Optimus Prime" (albeit in cursive on a gift tag), but the toy is listed as "Optimus Santa" on Super7's website, and "Optimus Prime Santa" on other sites.

{{-}}{{anchor|ReActionFallenTarget}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: This Target-exclusive version of the "Fallen Leader" concept is just the normal Optimus figure with the closed-up chest done in the grays of the initial "Fallen Leader" figure. Exciting! And clearance fodder!

: This figure was released alongside the "[[Megatron (G1)/merchandise#ReActionChromeCommander|Chrome Commander Megatron]]" figure.

{{-}}{{anchor|ReActionGolden}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The third [[Target]]-exclusive Optimus Prime figure, this one has a head-to-toe gold redeco, depicting his appearance in the end of "[[The Golden Lagoon (episode)|The Golden Lagoon]]".

: This figure was released alongside the similarly-decoed [[Megatron (G1)/merchandise#ReActionGolden|"Golden Lagoon" Megatron]] figure.

{{-}}{{anchor|ReActionFallenTargetColor}}
<ul class="iconlist">{{Bp-a1|'''Fallen Leader Optimus Prime''' (2022)}}</ul>
:*''Accessories'': Ion Blaster

: The second Target-exclusive "Fallen Leader" version of Optimus, and the third "Fallen Leader" overall (kinda morbid, y'all), and ''fourth'' Target-exclusive Optimus (overkill much?), this is the open-chest version of Optimus in his normal "living" color scheme, now better depicting the Matrix transfer moment when Prime was still (barely) alive.

: This figure was released alongside the thematically-similar [[Megatron (G1)/merchandise#ReActionFallenEvolution|"Fallen Evolution" Megatron]] figure.

{{-}}{{anchor|ReActionOpHalloween}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Accessories'': Ion Blaster

: A [[Halloween]]-themed redeco of the standard Optimus figure, in orange and black. Pumpkinmus Prime.

: This figure was a "shared exclusive", sold through multiple online retailers. Online listings call it "Optimus Prime (Halloween)", but the actual card simply says "Optimus Prime".

<ul class="iconlist">{{Bp-a1|'''Nucleon Quest Optimus Prime''' (2024)}}</ul>
:*''Accessories'': Ion blaster

: Wave eight of ''ReAction'' saw this black redeco of Optimus Prime, inspired by the 2001 [[Optimus Prime (G1)/toys#NucleonQuest|Nucleon Quest Super Convoy]] figure.

{{-}}

*'''Ark Base''' (Playset, 2024)

:*''Accessories'': Ion blaster

: The ''ReAction'' Ark Base playset included a version of Optimus Prime with his chest windows painted to add simulated reflective detail.
{{comingsoontoy}}
{{-}}

==''R.E.D. [Robot Enhanced Design]''==
[[File:TF-R.E.D.-Optimus-Prime.jpg|upright=1.66|thumb|Armored Convoy not included.]]
*'''Optimus Prime''' (2020)
**''Accessories'': Ion Blaster, Energon Axe, [[Matrix of Leadership/toys#R.E.D. .5BRobot Enhanced Design.5D|Matrix of Leadership]], 4 alternate hands
{{toydesigner|[[Emiliano Santalucia]] (concept artist)}}

:Released as part of the first wave of the ''[[Transformers R.E.D.]]'' line, Optimus Prime is a non-transforming 6-inch action figure akin to the ones from Hasbro's ''[[Marvel Comics|Marvel]] Legends'' and ''[[Star Wars (franchise)|Star Wars]] The Black Series'' lines. He is highly articulated and features extensive paint operations for [[show-accuracy]].

:Optimus comes with six hands altogether: a pair of closed fists, a pair of gently beckoning hands, a right hand for his included [[Ion blaster|Ion Blaster]] accessory, and a right hand with the index finger extended. He also features an [[Energon-axe|Energon Axe]], compatible with either wrist in place of his hand. Lastly, he includes a Matrix of Leadership, which can store in his chest thanks to his opening windows.

:As with all ''R.E.D.'' toys, Optimus Prime was a Walmart exclusive in Canada and the United States, and was later made available on [[Hasbro Pulse]] in limited quantities.

: This mold was used to make ''R.E.D.'' [[Ultra Magnus (G1)/merchandise#R.E.D. .5BRobot Enhanced Design.5D|Ultra Magnus]].
{{-}}

==''Super Cyborg''==
[[File:SuperCyborgOptimusPrime.jpg|upright=1.66|thumb]]
*'''Optimus Prime''' (2018)
**''Accessories'': Ion blaster, torso plate

:''Super Cyborg'' Optimus Prime is an 11-inch-tall non-transforming figure with 7 points of articulation. Its main distinguishing feature is that the entire front of the robot torso is removable, exposing not just the expected Matrix of Leadership but also many other sculpted mechanical details within Prime's body.

*'''Optimus Prime (clear)''' (2018)
**''Accessories'': Ion blaster, torso plate

:The transparent plastic version of this figure was exclusive to [[San Diego Comic-Con]] 2018.

*'''Optimus Prime (Dead)''' (2018)
**''Accessories'': Ion blaster, torso plate

:This dark grey version was exclusive to [[New York Comic Con]] 2018.

*'''Optimus Prime (Clear Red / Blue)''' (2023)
**''Accessories'': Ion blaster, torso plate

:This translucent version was exclusive to New York Comic Con 2023.
{{-}}

==Figural Bag Clip==
[[File:FiguralBagClip OptimusPrime.jpg|upright=1.22|thumb]]
*'''Optimus Prime''' (2020)
:Released by [[Monogram]], this 2.5" 3D foam bag clip takes the form of a chibi Optimus Prime.

:It was available only as part of a [[Blindpacking|mystery blind bag]] collection.
{{-}}
[[File:FiguralBagClip 2021 Optimus.JPG|thumb]]
*'''Optimus Prime''' (2021)
:A non-articulated, non-transforming 3" figure of Optimus Prime with an attached clip, also released by Monogram.

:Unlike the previous year's release it was sold on a standard cardback.

{{-}}

==D'elicce==
{{note|All Easter eggs listed below were exclusive to Lojas Americanas, a popular Brazilian chain store.}}
[[File:Brazilian Transformers Easter Eggs 2021.jpg|250px|thumb]]
*'''Transformers Easter egg''' (90g, 2021)
:In 2021, [[Brazil]]ian chocolate manufacturer Top Cau, under its kid-focused branch D'elicce, released a pair of ''Transformers''-themed [[Easter]] eggs that included a popcorn bucket of [[super deformed|cutesy proportions]] based on either Optimus Prime or Bumblebee.

{{-}}{{anchor|delicce2025}}
[[File:Brazilian Optimus Prime Easter Egg 2025.jpg|thumb|250px]]
*'''''Transformers'' Easter egg''' (90g, 2025)
:In 2025, D'elicce (or rather "Delice" as its spelled in some parts of this product) released an Optimus Prime-themed egg that came with a single piece of red plastic molded after the character's evergreen truck mode with trailer attached, inside of which the egg comes stored. Unfortunately, it means that not even his wheels can roll.

:The toy comes with a stickersheet that must be applied manually and is not packaged with pre-applied stickers as shown in the official stock photos.

{{-}}

==''Minimates''==
*'''Optimus Prime''' (Series 1, 2021)
**''Accessories'': Laser rifle, energy axe, stand

:Part of the first wave of Transformers [[Minimates]] from Diamond Select, this Optimus Prime is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. The Matrix of Leadership is printed on the Minimate figure's chest and is visible through the windows on the chest covering. Due to their small size, all 4 figures in each series are sold in the same blister card.

*'''VHS Minimates Box Set''' (2022)

:''Minimates'' Optimus Prime was rereleased as part of a [[San Diego Comic-Con]] 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles a [[Family Home Entertainment]] VHS tape. Only 2500 of this set were produced.
{{-}}

*'''Stasis Lock Optimus Prime''' (2023)
:Another San Diego Comic-Con brought another VHS-cassette-themed ''Minimates'' 4-pack exclusive, with another redeco of Optimus Prime - this time depicting him in "stasis lock" (meaning his grey dead color scheme, now with an opening empty chest compartment). Only 1500 of this set were produced.
{{-}}

==''ULTIMATES!''==
[[File:Super7 Ultimates Optimus Prime (G1).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2021)}}</ul>
:*''Accessories'': Ion blaster, energon axe, Matrix of Leadership, surfboard, jetpack, basketball, energy restraints, left & right fists, 2 open hands, right gripping hand, left pointing hand, alternate head

: Part of the first wave of ''[[Super7#Transformers ULTIMATES!|Transformers ULTIMATES!]]'' from [[Super7]], Optimus Prime is a 7-inch-tall action figure based on his cartoon model. He features multi-directional joints at the neck, shoulders, wrists, hips, and ankles; plus swivel biceps, elbows, knees, and a bit of ab crunch. His hands pop out at the wrists so they can be replaced with his additional spare hands in different poses (or the obligatory Energon Axe), and his head can be replaced with an alternate based on the original Optimus toy.

: He also features a ''lot'' of accessories, more than any other toy in the wave, including a number of episode-specific ones: [[Sideswipe (G1)|Sideswipe's]] jetpack from "[[More than Meets the Eye, Part 3]]", a ridable surfboard from "[[The Ultimate Doom, Part 3]]", energy restraints from "[[S.O.S. Dinobots]]", and his giant basketball from "[[The Master Builders (episode)|The Master Builders]]". He also includes a miniature [[Spike Witwicky (G1)#ULTIMATES!|Spike Witwicky]] figurine.

: Preorders for Optimus Prime (and the rest of Wave 1) opened on [[January 29]] 2021, and closed on [[February 28]], with the toys purportedly shipping in winter of that year but not actually arriving until May 2022.

{{-}}{{anchor|Alligaticon}}
[[File:Ultimates Alligaticon.jpg|upright=1.66|thumb]]
<ul class="iconlist">{{Bp-d1|'''Alligaticon''' (2022)}}</ul>
:*''Accessories'': Optimus Prime head; Optimus Prime rifle; Decepticon tower tip w/ arm; [[Battle taxi]]

: Part of the third wave of ''ULTIMATES!'', the [[Alligaticon#Merchandise|Alligaticon]] is a 10-inch-long non-transforming figure made to emulate the the Optimus-parts creature's cartoon model to pretty exacting detail (including the ''lack'' of detail on most of its flat surfaces). It makes ample use of multi-swivel joints to give its limbs a relatively wide range of motion, plus extensive tail jointing, a mid-body bend, some neck waggle, and an opening jaw.

: It comes with multiple "[[City of Steel (episode)|City of Steel]]"-themed accessories, including a tower with Optimus's arm attached to it. The arm is permanently attached, but the hand uses the same wrist-joint as the individual Optimus figure, and can be popped off and replaced with his other hands if you like (Optimus's wrist-pegs are larger than many other figures', so sadly cross-compatibility is limited at best). Curiously, while the arm appears to be identical to the prior figure's arm, the gun is not, having a trigger guard the original version lacks.

: It also comes with Optimus's disembodied head on a ball-jointed "neck" with trailing wires. Like the arm, the head is the same mold as the original Optimus, but this time cast in clear-blue plastic painted over, with a small gap in the back of the head to attempt [[light-piping]]... but depending on the strength of the light, it might just shine through the paint. Since it's the same mold, one could theoretically swap it out, but trying to push that wire-mass back into the socket seems like it'd be a bit of a pain in the neck (wocka wocka!).

: Preorders for the Alligaticon (and the rest of Wave 3) opened on [[December 1]], 2021, with the toys projected to ship in fall 2022... and ''actually'' shipping in November 202''3''.

{{-}}{{anchor|Ultimates2}}
[[File:Super7 Ultimates Optimus Prime (Fallen Leader).jpg|thumb|upright=1.44]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Fallen Leader)''' (2023)}}</ul>
:*''Accessories'': 2 fists, 2 open hands, 2 Matrix-grip hands, trigger-grip right hand, Matrix of Leadership, Matrix cover, ion blaster

: This retool and redeco of ''ULTIMATES!'' Optimus Prime is the latest of several representations of his dead body from "[[The Transformers: The Movie]]," now with a greyscale paint scheme, a heavily damaged left torso section, and cracks all over him (and on his rifle too for good measure). His chest is redesigned to allow it to open and reveal the Matrix.

: Preorders opened in June 2022, with the expectation that of figures shipping in May 2023.... but actually January 2024
{{-}}

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': ion blaster

: The original ''ULTIMATES!'' Optimus Prime was repackaged as a "Transformers Deluxe" figure, physically identical to the first release but now lacking all accessories except the gun. Its new packaging resembles a VHS clamshell box; specifically, the colors and trade dress strongly resemble the [[Video Gems]] tapes, while the character artwork and subtitle are taken directly from the [[The Original Transformers|Kid Rhino]] tapes.

: This piece was exclusive to, of all things, Macy's.

==''Pop!''==
[[File:Funko Pop Optimus Prime G1.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:Released as part of the ''Pop! Retro Toys'' segment, [[Funko Pop!|Funko]]'s ''Pop!'' Optimus Prime is a super deformed vinyl figure based on his original Generation 1 toy, though his eyes are painted blue like in the cartoon.

:This mold was later redecoed as [[Nemesis Prime (G1)#Pop!|Nemesis Prime]].

{{-}}{{anchor|PopMetallic}}
[[File:Funko Pop Amazon Metallic Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (2021)
**''ID number:'' '''22'''

:An [[Amazon (website)|Amazon]] exclusive redeco of the figure above, this version of Optimus Prime features a more metallic paintjob.

{{-}}{{anchor|PopGIJoe}}
[[File:Funko Pop Mystery Box Optimus Prime Cobra Commander.jpg|thumb|upright=1.44]]
*'''Funko Mystery Box: Transformers vs. G.I. Joe''' (Giftset, 2021)
**''ID number:'' '''44'''

:Available only as part of a GameStop exclusive giftset, this retooled Optimus Prime comes with his Energon axe attached to his right hand instead of his ion blaster and comes [[Blindpacking|blindpacked]] inside a ''Transformers vs. [[G.I. Joe (franchise)|G.I. Joe]]''-themed lunch box alongside a ''Pop!'' [[Cobra Commander#Pop!|Cobra Commander]] figure, a Decepticon logo decal, a Cobra logo keychain, and a set of four pins of Optimus Prime, Cobra Commander, [[Megatron (G1)/merchandise#Pop!|Megatron]] and [[Duke (G.I. Joe)#Pop!|Duke]].

{{-}}{{anchor|PopJumbo}}
[[File:Funko Pop Jumbo 10-inch Optimus Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (Jumbo size, 2021)
**''ID number:'' '''71'''

:A larger version of the regular ''Pop!'' Optimus Prime measuring 10-inches tall.

{{-}}{{anchor|PopKeychain}}
[[File:Funko Pocket Pop Keychain Optimus Prime.jpg|thumb|upright=1.11]]
*'''Optimus Prime''' (Pocket ''Pop!'' Keychain, 2021)

:A smaller version of the regular ''Pop!'' Optimus Prime with a keychain attached to his head.

{{-}}{{anchor|Digital Pop!}}
*'''Optimus Prime''' ([[Funko Pop!#Digital Pop! NFTs|Digital ''Pop!'']], 2022)
**''Rarity:''
***''Monochrome:'' '''Common'''
***''Static:'' '''Common'''
***''Glowing:'' '''Uncommon'''
***''Chrome:'' '''Rare'''
***''Original:'' '''Epic'''
***''Monochrome, Matrix-opening:'' '''Epic'''
***''Gold, Matrix-opening:'' '''Grail'''
:{{W|Non-fungible token|NFT}}s depicting Optimus Prime in the Funko style. Some variants are depicted opening the Matrix over Cybertron, one of which (the Grail one) could be redeemed for a chance to get a physical version of the depicted figure. Said variant was limited to 999 pieces.
<center><gallery heights=200>
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_MONOCHROME.gif|Remember [[The many deaths of Optimus Prime#The Transformers: The Movie|this one?]]
File:TRANSFORMERS_COMMON_OPTIMUS-PRIME_STATIC.gif|Not gray, but still may as well be dead.
File:TRANSFORMERS_UNCOMMON_OPTIMUS-PRIME_GLOW.gif
File:TRANSFORMERS_RARE_OPTIMUS-PRIME_REDCHROME.gif|[[The Return of Optimus Prime, Part 1|Oops.]]
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME_ORIGINAL.gif
File:TRANSFORMERS_EPIC_OPTIMUS-PRIME-GOLDVARIANT_MONOCHROME.gif
File:TRANSFORMERS_GRAIL_OPTIMUS-PRIME-GOLDVARIANT_ORIGINAL.gif
</gallery></center>
{{-}}{{anchor|PopDigital}}
[[File:Funko Pop Digital Optimus Prime.jpg|thumb|upright=1.44|Stealing NFTs is the right of all sentient beings.]]
*'''Optimus Prime''' (2022)
**''ID number:'' '''49'''

:Part of the ''Pop! Digital'' segment, this regular-sized vinyl figure portrays Optimus opening the Matrix of Leadership and is entirely painted gold. It could only be acquired by redeeming the Grail NFT above.

{{-}}{{anchor|Pop! Pin}}
[[File:Funko-Pop-Pin-Optimus-Prime.jpg|thumb|upright=1.44]]
*'''Optimus Prime''' (''Pop!'' Pin, 2022)
**''ID number:'' '''18'''
**''Accessories:'' Display stand
:A metallic enamel pin based on Optimus Prime's vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

:A "redeco" of this pin as [[Nemesis Prime (G1)#Pop! Pin|Nemesis Prime]] was also released as a limited edition chase variant.

{{-}}{{anchor|Pop! Masks}}
[[File:Funko Pop mask Optimus Prime.jpg|thumb|upright=1]]
*'''Optimus Prime''' (''Pop!'' Masks, 2022)
:Released by Disguise Costumes in collaboration with Funko and exclusive to Walmart, ''Pop!'' Masks Optimus Prime is a large half face mask based on the head of the vinyl figure.

{{-}}{{anchor|Pop! Hallmark}}
*'''Optimus Prime''' (Christmas tree ornament, 2022)
:Released by [[Hallmark]] and also exclusive to Walmart, this Optimus Prime Christmas tree ornament is virtually identical to the vinyl figure in appearance.

{{-}}{{anchor|Fundays1}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Exclusive to a Funko-oriented event called Fundays, this regular-sized vinyl figure portrays [[Freddy Funko]] cosplaying as Optimus Prime. The body of this figure is the same as the regular Optimus, while the head has been modified to incorporate Freddy's face. This regular version was limited to 1500 pieces.

{{-}}{{anchor|Fundays2}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:A metallic version of the Freddy Funko as Optimus Prime figure was also available, now limited to only 500 pieces.

{{-}}{{anchor|Fundays3}}
*'''Freddy Funko as Optimus Prime''' (2022)
**''ID number:'' '''SE'''

:Also available and limited to 500 pieces was a version of Freddy Funko as Optimus Prime that glows in the dark.

{{-}}{{anchor|PopPotato}}
*'''Mr. Potato Head Optimus Prime''' (''Pop! Digital Retro Toys'', 2022)
**''Rarity:'' '''Grail'''
**''ID number:'' '''127'''
:Similar in concept to other [[Mr. Potato Head]] toys, this vinyl figure is a representation of said character taking the appearance of Optimus Prime, except it can't be taken apart piece by piece.

:This figure is limited to 1550 units and can only be acquired redeeming an NFT representing this version of the character.

{{-}}{{anchor|PopLights}}
*'''Optimus Prime''' (Lights and Sounds, 2023)
**''ID number:'' '''120'''
**''Accessories:'' Base
:A standard-sized figure released in the ''Retro Toys'' line, "Lights and Sounds" Optimus Prime features... well, lights and sounds. He also includes a display base, and is posed with his left arm pointing forward and his right hand holding his blaster.

:This figure is exclusive to the Funko Shop online store.

{{-}}{{anchor|Pop! Tee}}
*'''Optimus Prime Tee''' (T-shirt, 2023)
:A T-shirt available on Funko's online store, it features artwork of ''Pop!'' Optimus Prime in the same pose and style as the original Generation 1 Optimus Prime packaging art.

{{-}}{{anchor|Pop40Years}}
*'''Optimus Prime''' (2024)
**''ID number:'' '''131'''

:Released in celebration of the 40 years of the franchise, this regular sized ''Pop! Retro Toys'' Optimus Prime is a similar mold to the original release, but is doing a different pose and features toy-accurate yellow eyes.

{{-}}{{anchor|Pop40Years2Pack}}
*'''Optimus Prime & Megatron''' (2-pack, 2024)

:A Hot Topic exclusive release of the 40th anniversary Optimus Prime and [[Megatron (G1)/merchandise#Pop40Years2Pack|Megatron]] vinyls with a metallic finish to their paintings.
{{--}}

==Modern Icons==
[[File:Modern_Icons_Optimus_Prime_helmet.jpg|thumb|upright=1.66|GIVE ME MY FACE.]]
*'''Optimus Prime Modern Icons Replica Helmet''' (December 27, 2021)
:A collaboration between Hasbro and statue and replica brand Modern Icons, this is a wearable helmet for adult collectors, based on Optimus Prime's head. It features light-up eyes and authentic sounds and phrases.

:Originally due for release on August 16, 2021, the Optimus Prime helmet was delayed until December 27 (as was [[Megatron (G1)/merchandise#Modern Icons|its Megatron counterpart]]). The helmet is a GameStop exclusive in the United States.
{{--}}

==''Super Shogun''==
*'''Optimus Prime''' (2021)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Another "retro-styled" non-transforming figure by [[Super7]], ''Super Shogun'' Optimus Prime is meant to be an homage to the 1970s "{{w|Shogun Warriors (toys)|Shogun Warriors}}" toyline. To match the famous features of those older toys, this Optimus stands 24" tall and is mostly made of hollow plastic, with 3 points of articulation, wheels on his feet, and a spring-loaded firing left fist. His chest doors open to reveal a removable Matrix of Leadership. Suggested retail price was $350 - hopefully if you're old enough to remember "Shogun Warriors" you've gotten a good job by now.

*'''Optimus Prime (Fallen Leader)''' (2022)
**''Accessories'': Ion blaster, Matrix of Leadership, left fist

:Continuing the trend from their ''ReAction'' and ''ULTIMATES!'' Optimus Prime figures above, Super7 also produced a grey redeco of ''Super Shogun'' Optimus Prime representing his dead body. {{-}}

==''Zōteki''==
[[File:ZOTEKI-024-Optimus-Prime.jpg|thumb|upright=1.66|I farted.]]
*'''Optimus Prime''' ([[2021]])
**''ID number'': '''024'''

:A collaboration between [[Hasbro]] and statue/replica brand [[Jazware]], ''[[The Transformers (franchise)|The Transformers]]'' was added as a part of the ''[[Zōteki]]'' line alongside other iconic brands such as [[Marvel Comics|Marvel]], to recreate some of the main "Generation 1" characters. The 24th figure of the ''Zōteki'' line; Optimus Prime wields his iconic [[Ion blaster]].

:Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
{{-}}

==Eaglemoss==
[[File:EaglemossChess OptimusPrime.jpg|upright=1.11|thumb]]
* '''Transformers Gen-1 Chess Set''' (<s>2021</s>)
:In the planned [[Chess#Eaglemoss|Transformers Chess Set]] by [[Eaglemoss]], a relatively large and very well detailed statue of Optimus Prime was slated to be the standard King piece on the Autobot side.

:A Kickstarter campaign to raise the necessary funds for this project was launched, but failed to meet its goal by September 24, 2021 and the whole thing was canceled. The Optimus Prime piece managed to technically get a very limited release, however, as some online influencers in the ''Transformers'' fandom received copies gifted to them by Eaglemoss during the Kickstarter campaign.
{{canceledtoy}}
{{-}}

==e-HOBBY==
===''Transformers Character Card''===
{{anchor|TCC G1}}
[[File:Transformers Character Card G1 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Convoy & Megatron Set''' ([[January 25]], [[2022]])
**''ID number:'' '''01 & 02'''
{{toydesigner|[[Shin Sasaki]] (illustration)}}

:Released as part of the first wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Roller (G1)|Roller]]) and [[Megatron (G1)|Megatron]] (with [[Starscream (G1)|Starscream]], [[Thundercracker (G1)|Thundercracker]] and [[Skywarp (G1)|Skywarp]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#01|Translation of G1 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Laser}}
[[File:Transformers Character Card G2 Optimus and Megatron.jpg|upright=1|thumb]]
*'''Battle Convoy & Megatron Set''' ([[March 14]], 2022)
**''ID number:'' '''11 & 12'''

:Released as part of the second wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime and Megatron in their ''[[Transformers: Generation 2 (franchise)|Generation 2]]'' bodies along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#LaserOptimusPrime|Laser Optimus Prime]]" toy.
::*''[[Source:Transformers Character Card#11|Translation of G2 Optimus Prime's Transformers Character Card]]''
{{-}}

{{anchor|TCC Black}}
[[File:Transformers Character Card Megatron Black and Convoy Black.jpg|upright=1|thumb]]
*'''Transformers Card Binder (includes 2 special cards)''' ([[November 1]], 2022)
**''ID number:'' '''EX'''

:Released in its fifth wave as something of a "season one finale" to the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this 40-slot binder intended to contain the entire ''Character Card'' series thus far is packed with a pair of holographic trading cards depicting super-deformed art of Optimus Prime and Megatron in the forms of their first e-HOBBY exclusive toys along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the ''[[Hybrid Style]]'' "[[Optimus Prime (G1)/toys#THS02B|Convoy Black Version]]" toy.
::*''[[Source:Transformers Character Card#EXOP|Translation of Optimus Prime Black Version's Transformers Character Card]]''
{{-}}

{{anchor|TCC Hero}}
[[File:Transformers Character Card Jhiaxus and Hero OP.jpg|upright=1|thumb]]
*'''Jhiaxus & Convoy Missile Trailer Set''' ([[February 6]], [[2023]])
**''ID number:'' '''41 & 42'''

:Released as part of the sixth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Jhiaxus (G2)|Jhiaxus]] and ''Generation 2'' Optimus Prime along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus is specifically depicted as the [[Optimus Prime (G1)/toys#HeroOptimusPrime|Hero Optimus Prime]] toy.
::*''[[Source:Transformers Character Card#42|Translation of Hero Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Matrix}}
[[File:Transformers Character Card Matrix and Alpha Trion.jpg|upright=1|thumb]]
*'''Alpha Trin & Convoy Set''' ([[April 22]], 2023)
**''ID number:'' '''49 & 50'''

:Released as part of the seventh wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of "[[Alpha Trion|Alpha Trin]]" and Optimus Prime touting the [[Matrix of Leadership]] along with [[bio|character profiles]] and [[Tech Spec|tech specs]]. Optimus's card notably eschews the line's usual [[Power Plans]]-inspired motif for a reproduction of the original 1984 [[Package art#Hasbro|toy packaging mural]] in celebration of the line's 50th release.
::*''[[Source:Transformers Character Card#50|Translation of Optimus Prime (with Matrix)'s Transformers Character Card]]''

{{-}}

{{anchor|TCC Orion}}
[[File:Transformers Character Card Hot Rod and Orion Pax.jpg|upright=1|thumb]]
*'''Orion Pax & Hot Rodimus Set''' ([[August 14]], 2023)
**''ID number:'' '''59 & 60'''

:Released as part of the eighth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Orion Pax and "[[Hot Rod (G1)|Hot Rodimus]]" along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#59|Translation of Orion Pax's Transformers Character Card]]''

{{-}}

{{anchor|TCC Action}}
[[File:Transformers Character Card Action Master Megatron and OP.jpg|upright=1|thumb]]
*'''Convoy (Action Master) & Megatron (Action Master) Set''' ([[December 28]], [[2024]])
**''ID number:'' '''93 & 94'''

:Released as part of the thirteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of Optimus Prime (with [[Armored Convoy]]) and Megatron (with [[Neutro-Fusion Tank]]) in their [[Action Master]] forms along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#93|Translation of Action Master Optimus Prime's Transformers Character Card]]''

{{-}}

{{anchor|TCC Autobot}}
[[File:Transformers Character Card Autobots and Primus.jpg|upright=1|thumb]]
*'''Primus and Cybertron Army Set''' ([[February]], [[2025]])
**''ID number:'' '''101 & 102'''

:Released as part of the fourteenth wave of the [[e-HOBBY]] exclusive ''[[Transformers Character Card]]'' series, this pair of holographic trading cards depict super-deformed art of [[Primus]] in the form of his [[Primus#2010|"Creator" toy]] and the Generation 1 [[Autobot]]s (as represented by Optimus Prime, [[Blaster (G1)|Blaster]], [[Eject (G1)|Eject]], [[Grimlock (G1)|Grimlock]], [[Prowl (G1)|Prowl]], [[Crossblades (G1)|Crossblades]], [[Jazz (G1)|Jazz]] and [[Turbo Board]]) along with [[bio|character profiles]] and [[Tech Spec|tech specs]].
::*''[[Source:Transformers Character Card#102|Translation of the Autobots' Transformers Character Card]]''

{{comingsoontoy}}
{{--}}

===Acrylic keychain series===
[[File:E-Hobby Optimus Prime and Bumblebee keychains.jpg|upright=1|thumb]]
*'''Convoy & Bumble''' ([[October]], [[2022]])

:Released as part of the first wave of an [[e-HOBBY]] exclusive series, this pair of keychains depicts character art and assets re-used from Optimus Prime and [[Bumblebee (G1)|Bumblebee's]] [[The Transformers: Masterpiece|''Masterpiece'']] releases, namely [[Optimus Prime (G1)/toys#MP44|MP-44 Convoy]] and [[Bumblebee (G1)/toys#MP45|MP-45 Bumble and Spike 2.0]] respectively.

{{--}}

==''Authentics''==
{{anchor|ClipBot}}
[[File:ClipBotsPrime.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2018)

:''Clip Bots'' Optimus Prime is a small [[super deformed]] plush that can be "transformed" into a little tractor trailer by flipping it inside out. It features a plastic clip so it can dangle from whatever you clip it to.
{{-}}
{{anchor|22Mask}}
[[File:Authentics Optimus Prime Mask 2022.jpg|upright=1|thumb|Unlike some Optimus Primes, he'll [[Transformers: Revenge of the Fallen (film)#Quotes|give you his face]] instead.]]
*'''Optimus Prime''' (2022)

:Modeled after Optimus Prime's evergreen design, this [[roleplay toy]] mask was released along side an [[Bumblebee (G1)/merchandise#22Mask|Bumblebee]] version.
{{-}}
{{anchor|AquaPals}}
[[File:AquaPalsLargeOptimus.jpg|upright=1|thumb]]
*'''Optimus Prime''' (2023)

''Aqua Pals'' Optimus Prime was released by [[WAHU]]. It is a plush made out of material designed to dry quickly, allowing it to be played with in water. The large plush is 24 inches tall.
{{-}}

{{anchor|DogToys}}
[[File:CrunchandsqueakOptimusPrime.jpg|upright=1|thumb]]

*'''Crunch & Squeak Optimus Prime''' (2023)

Manufactured by [[Gramercy Products]], ''Crunch and Squeak'' Optimus Prime is a simple dog toy, with a water bottle inside to be crunched. Because of this, its legs are fully attatched to each other. The embroidery color for the outline of the eyes varies, coming in gray or blue.
{{-}}
*'''Squeak & Tug Optimus Prime''' (2023)

''Squeak & Tug'' Optimus Prime is another dog toy by Gramercy Products. It has two rope knots connected from the bottom of each of its legs, for tugging purposes. It also has a mouth ''on top'' of its faceplate.

{{anchor|24Mask}}
[[File:Authentics_Optimus_Prime_Mask_2024.jpg|upright=1|thumb]]
*'''Optimus Prime Mask''' ([[2024]])

:Manufactured by [[Peachtree Playthings]], this mask is a completely new mold based on Optimus Prime's evergreen design, though it's a bit more stylized then the 2022 version. It was found at discount stores such as Dollar Tree with no prior announcement. As with the previous mask, it was released along side an [[Bumblebee (G1)/merchandise#24Mask|Bumblebee]] version.
{{-}}
{{anchor|CBoptimus}}
[[File:Authentics Cyber Battlers Optimus.jpeg|upright=1|thumb]]
*'''Cybertron Battlers Optimus Prime''' ([[2022]])
:Released in the ''Cybertron Battlers'' subline of ''Authentics'', this vinyl figure is a non-transforming, 5.5 inch rendition of Optimus Prime in his evergreen design with limited points of articulation. He has an Energon Axe molded into his right hand.

:He comes packaged either individually with a tag, or in twos in a box together with [[Bumblebee (G1)/merchandise#Authentics|Bumblebee]] and [[Megatron (G1)/merchandise#Authentics|Megatron]].
{{-}}

{{anchor|Teeturtlereverse}}
[[File:Small_Reversible_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Reversible Plushie Optimus Prime''' (2025)

:Released by [[TeeTurtle]], ''Reversible Plushie'' Optimus Prime is a round, [[super deformed]] plush, that can be turned inside out to reveal a truck alternate mode. A 3 inch version was released in blind boxes, while a 6 inch version was made available exclusively at [[Walmart]]. It appears to be based on Optimus Prime's [[evergreen]] design, with a license plate that reads 'ROLL OUT'.
{{-}}
{{anchor|Teeturtlecloudhead}}
[[File:Cloudheads_OptimusPrime_Teeturtle.jpg|upright=1|thumb]]
*'''Cloudheads Optimus Prime''' (2025)

:Also released by [[TeeTurtle]], ''Cloudheads'' Optimus Prime is another [[super deformed]] plush based off of Optimus's [[evergreen]] design. It is 5 inches tall. It has a large head, and its body is weighted with glass beads.
{{-}}

==Nendoroid==
[[File:Nendoroid G1 Optimus Prime.jpg|upright=1.66|thumb]]
*'''Nendoroid Optimus Prime (G1 Ver.)''' ([[2022]])
**''Nendoroid ID Number'': '''1765'''
**''Accessories'': Ion blaster, Energon-axe, pointing hand

:[[Nendoroid]] Optimus Prime is a [[super deformed]], adorable rendition of the original Autobot commander. It is the first Nendoroid figure released for a "Generation 1" character, as the first Nendoroid figures for ''Transformers'' were for the ''[[Bumblebee (film)|Bumblebee]]'' movie.

:As with most Nendoroids, Optimus Prime can interchange body parts with compatible figures, and comes with an alternative "pointing hand" accessory to aid with specific posing. The figure is packed with Optimus's trademark Ion blaster and Energon-axe weapons (generically referred to as a gun and an energy axe by the Good Smile Company website), the latter of which replaces Optimus's hand when wielded. He also features articulation at the head, knees, shoulders, elbows, and even his chest.

:This mold was later redecoed as [[Nemesis Prime (G1)#Nendoroid|Nemesis Prime]].
{{-}}

==Icon Heroes==
*'''Optimus Prime X Bumblebee Retro Pin Set''' (2022)
: A hard enamel pin based on Optimus Prime's original G1 package art made by Icon Heroes. It comes carded with a [[Bumblebee (G1)/merchandise#Icon Heroes|Bumblebee]] pin.

: This pin was also available in [[Nemesis Prime (G1)#Icon Heroes|Nemesis Prime]] colors.
{{comingsoontoy}}

{{-}}
[[File:Icon-Heroes-Optimus-Prime-Action-Statue.jpg|upright=1.11|thumb|''Of course'' we need another superdeformed Optimus Prime statue, why do you ask?]]
*'''Optimus Prime Action Statue''' ([[2023]])
: A 12" tall polystone statue of Optimus Prime holding his ion blaster and standing over an Autobot insignia base. The statue is slighty superdeformed with an unusually large head and features some neck articulation.

: Each sample is going to be individually numbered and come with a certificate of authenticity.
{{comingsoontoy}}

{{-}}

==Just Play==
{{anchor|Podpals}}
[[File:PodpalsOptimusLarge.jpg|upright=1|thumb]]

*'''Podpals Optimus Prime''' (2023)

Made by [[Just Play]], ''Podpals'' Optimus Prime is a rounded plush. It has tiny flaps of fabric for its legs and head details, while other details are printed on. There are two versions, an 8 inch version and a 3 inch version. They are identical besides their size.

<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2022)}}</ul>

:Optimus Prime is a small, soft plastic figure, 2" tall, with no articulation. It's overall based on his appearance in the G1 cartoon. He does have a noticable lack of paint apps; most notably the windows on his chest not being painted at all.

:The packaging is G1-styled with the classic black-red gradient and the G1 Optimus Prime toy in the top right corner.

[[File:JustPlay_G1_Optimus_Prime.jpg|thumb|upright=.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>

:This figure is identical to the original release. Unlike the original release, however, he also comes with a foil sticker depicting his G1 design on a card with a sort of profile picture on the back and text underneath it saying "OPTIMUS PRIME IS THE LEADER OF THE AUTOBOTS." The packaging is also different as it no longer features Optimus Prime (having been replaced with a block advertising the new card).
: There's a variant of this found at stores like Dollar Tree where the block advertising the card is moved to the top left with a red circle that says "$1.25" in it in the top right instead.

{{-}}

==Kotobukiya==
===Bishoujo Series===
[[File:Bishoujo-Series-OptimusPrime.jpg|upright=1.3|thumb|Looking this good is the right of all sentient beings.]]
*'''Bishoujo Series Transformers Convoy/Optimus Prime''' (January 2023)
**''Accessories'': Alternate masked face
**''Known designers:'' [[Shunya Yamashita]] (artist)

:''[[Kotobukiya]] [[Bishoujo Series]]'' Convoy/Optimus Prime renders the classic Autobot commander as a cute anime girl (formally termed as a ''{{w|Bishōjo}}''). Bishoujo Optimus's necklace represents the [[Matrix of Leadership]], while Prime's trailer and wheels are represented as her suitcase and boots respectively.

:''Bishoujo Series'' Optimus Prime also comes with an alternate [[Mouthplate|masked]] headpiece, and a red display base designed after the Autobot insignia. A Deluxe Edition release also included a B5-sized acrylic board for display, featuring Yamashita's original artwork of the character.

:This statue was later recolored and retooled to create ''Bishoujo Series'' [[Nemesis Prime (G1)#Kotobukiya Bishoujo Series|Nemesis Prime]].
{{-}}
===Frame Arms Girl===
[[File:Kotobukiya-TF-Optimus-Prime-Fumikada-Shimane-Ver-kit.jpg|thumb|upright=1.66|Minerva's <s>Ginrai</s> Optimus Prime cosplay.]]
*'''Convoy/Optimus Prime Humikane{{sic}} Shimada Ver.''' (June 2025)
**''Accessories'': 5 pairs of hand parts, 2x2 Faceplates (Android, Human), Front hair/helmet parts for human face config, Ion Blaster, Energon Axe
**''Known designers:'' [[Fumikane Shimada]] (artist)

:Designed by Humikane (actually "Fumikane") Shimada of ''Frame Arm Girls'' and ''30 Minutes Sisters'' fame, this 135mm articulated ''FA Girl'' model kit (though technically not referred to as such on the box, she is listed as part of the ''FA Girl'' product line on Kotobukiya's website) of Optimus Prime/Convoy is another personified take of the character compared to the ''Bishoujo Series'' statue above. Aside from her hand parts and the two signature weapons, Optimus also comes with two types of faceplates, with two expressions for each, and a few front hair/helmet parts for each configuration. The rear truck wheels on her legs can be flipped down to form a pair of support skates.
{{--}}

==Micro Machines==
[[File:MMMPrime&Tracks.jpg|upright=1.66|thumb]]
*'''Optimus Prime Hauler Playset''' (2022)
**''Accessories'': [[Tracks (G1)/toys#Micro Machines|Tracks]] vehicle, decoder
{{charstubtoys}}

==XM Studios==
*'''Optimus Prime''' (2022)

:This hand-painted porcelain statue of Optimus Prime stands over 26" tall and features alternate arms to allow owners to display him in different poses or switching out his signature laser rifle for his energon axe. His chest-mounted Matrix of Leadership lights up, and the set also includes a sculpted version of the truck mode to display next to the robot. Suggested retail was about $1,700.

*'''Optimus Prime Bust''' (2023)

:A four-foot-tall bust of Optimus Prime, with hand-burnished metallic features and a $4,000 price tag.
{{-}}

==''Transformers × Mini World''==
[[File:MiniWorldOptimus.jpg|thumb|upright=1.66]]
*'''Optimus Prime''' (2023)
**''Accessories'': Transforming base, gun, axe, 2 smokestacks, machine part, crane arm, 2 connectors

:''[[Transformers × Mini World]]'' Optimus Prime is a tie-in to the popular [[China|Chinese]] game ''[[Mini World]]''. It comes with a display base which can fold up into a cube-shaped representation of Prime's truck mode, complete with rolling wheels. The figure can transform into a storage mode and store fully inside the cube, or you can remove his head and replace it with the folded up cube. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and axe accessories. The set includes two smokestacks that can be pegged onto the truck-cube mode.

:Each set includes [[Build a Figure]]-like machinery components which can be combined with parts from other sets to make new structures.

:It is exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.
{{-}}

==Mochibots Transformers Plush==
[[File:MochibotsPrime.jpg|upright=1.3|thumb|It was either this or a banana to show how tall I am. And I'm ''NOT'' Primal!]]
<ul class="iconlist">{{Bp-a1|'''Mochibots "Transformers" Plush Convoy''' (2023)}}</ul>
:Apart of the line of cute, cuddly Transformers Plushies, [[Mochibots Transformers Plush|Mochibots]] Convoy (otherwise known as ''Optimus Prime'') is a 5.5 CM tall variation of the character, with Sunbow cartoon-accurate white pants and all! This Convoy is given a "Fumo" stylization, making the robotic detailing more rounded and soft, with stubby limbs and a cute, somewhat stern expression. Every detail is sewn-in, leading to him and the rest of the Mochibots line having a premium feel, with added texture and depth added to each detail. In addition to all this cute Convoy's offerings, he has a block of stuffed material in the back to represent his "Backpack", and a stitched-on Autobot logo! Though, much like [[Cliffjumper (G1)/toys#Mochibots Transformers Plush|Cliff]], the Autobot logo seems to have a squinting expression, likely a limitation of how far the detail can go with this process. Like many other Mochibots, Convoy also features a special, reflective material in his eyes and windows, with light giving it a special shimmer effect whenever it hits it.

:Convoy was released in the Summer of 2023 in "Volume 1" of the Mochibots line, alongside Cliff, Bumble, and Convoy's Shattered Glass counterpart. This line was exclusive to China and Japan, with almost all of them being locked to Asia via [[amiami|amiami's]] digital storefront.

{{-}}

==Fools Paradise==
{{anchor|LOWFOOL}}[[File:LOWFOOL League of Steel Optimus Prime.jpeg|upright=1.66|thumb|Some contrast to the bishoujo, huh?]]
*'''Optimus Prime''' (2023)
**''Accessories'': Football

:Part of a collaboration between Hasbro and [[Hong Kong]]-based online store ZCWO, Optimus Prime joins the "League of Steel" subline of [[Fools Paradise]]'s LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues of [[Neon Genesis Evangelion|Evangelion]]s and {{w|Gundam}}s. He is depicted as a human man wearing heavily Optimus Prime-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache (not, as you might surmise, as a reference to [[Peter Cullen]]'s own face fuzz).

:Preorders for Prime opened in June 2023, with a projected release date of November.

{{-}}

{{anchor|ZCWO}}[[File:Fools Paradise Optimus Prime statue.jpeg|upright=1.3|thumb]]
*'''Optimus Prime''' (2024)

:A second statue of Optimus Prime by Fools Paradise portrays Optimus Prime in a much more conventional (if heavily stylised) design. This vinyl statue of Prime stands approximately 60cm tall, and features light up LED eyes and apparently boasts a full range of articulation. It also features a somewhat weathered paint job.

:Preorders opened in November 2023, with a projected release date of March 2024.
{{comingsoontoy}}

{{-}}

==McFarlane Toys==
{{anchor|PagePunch}}[[File:Page Punchers Optimus Prime and Megatron.jpeg|upright=1.66|thumb|If you squint, you can just ''barely'' make out the lack of a waist swivel.]]
*'''Optimus Prime and Megatron''' (2024)
: ''[[Page Punchers]]'' Optimus Prime is 3-inch non-transformable action figure based off his [[IDW Publishing|IDW]] design.

: He comes in a two-pack with [[Megatron (G1)/merchandise#PAGEPUNCH|Megatron]], packaged with [[New Cybertron Part 1: To Walk Among the Chosen|''Optimus Prime'' #1]] and [[Dissolution Part 6: This Machine Kills Fascists|''Lost Light'' #6]].

{{-}}

==''Hot Wheels''==
{{picsneeded}}
{{anchor|HWTrackFleet}}
[[File:Hot Wheels Track Fleet Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1| '''Optimus Prime''' (Track Fleet, 2024)}}</ul>
:*''Accessories'': Trailer (detachable)
{{toydesigner|[[Charlie Angulo]] ([[Mattel]])}}
:''[[Hot Wheels (franchise)|Hot Wheels]]'' Track Fleet Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Unlike the concurrently released [[Bumblebee (G1)/merchandise#HWScreenTime|''HW Screen Time'' Bumblebee]], Optimus does ''not'' have a sculpted robot face on his undercarriage.

{{-}}{{anchor|HWSkate}}
[[File:Hot Wheels Skate Optimus Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Skate, 2024)}}</ul>
:*''Accessories'': Finger sneakers
:Part of the ''Hot Wheels Skate'' subset, this is an Optimus Prime-themed finger skateboard that comes with a pair of red finger sneakers. The shape and packaging use Dreamwave-era artwork of Optimus Prime.

{{-}}{{anchor|HWScreenTime}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (HW Screen Time, 2025)}}</ul>
:*''Mainline ID number:'' 104/250
:*''HW Screen Time ID number:'' 6/10
{{toydesigner|[[Manson Cheung]] and Leeway Chang ([[Mattel]])}}
:''Hot Wheels'' HW Screen Time Optimus Prime is a non-transforming truck at 1/64 scale based on a Freightliner FL86 Class 8 truck, sized to be compatible with ''Hot Wheels'' tracks.

:Compared to the ''Track Fleet'' version, this version of Optimus ''has'' a sculpted robot face on his undercarriage, is larger and does not feature a trailer. It is largely based on the transforming ''Mattel Creations'' version of Optimus but with some modifications for cost reasons.

{{--}}

==''Beyblade X''==
[[File:Beyblade_X_Transformers_OptimusPrime.jpg|thumb|Not pictured: Optimus Prime using this to part the Red Sea.]]
*'''Optimus Prime and Megatron Multipack Set''' (2024)

:'''Optimus Prime 4-60P''' was available in a two-pack with [[Megatron (G1)/merchandise#Beyblade X|Megatron 4-80B]], which was exclusive to Amazon in Hasbro territories, and exclusive B4-sponsored stores in Takara-Tomy territories. It consists of three pieces that can be interchanged with those of [[Beyblade#BEYBLADE X|other ''Beyblade X'' tops]]; an attacking "Blade" primarily made of metal, a "Ratchet" that locks parts together and determines height, and a "Bit" that touches the ground and determines movement.

:The "Optimus Prime" Blade features evergreen art of Optimus Prime on its central Gear Chip and is partial of the mainline ''Beyblade X'' Blade "Helm Knight". The Ratchet (4-60) and Bit (Point) are recolored parts from other ''Beyblade X'' tops.

:In Hasbro territories, a QR Code sticker hidden underneath the Blade can be scanned into the ''Beyblade X'' companion app. In Takara-Tomy territories, the QR Code stickers are omitted in favor of a Beycode Card packed with the instructions. However, scanning any of these QR codes only awards the player with in-app points, and will not unlock the Beyblade for in-game use like it would for any mainline ''Beyblade X'' tops.

{{-}}

==Yolopark==
===AMK===
{{anchor|AMKPro}}
[[File:YoloparkAMKProG1OptimusPrime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released as part of Yolopark's AMK Pro line, Optimus Prime comes in pre-assembled modules as opposed to traditional model kit runners. This allows him to be assembled quickly and easily without tools. Unlike Yolopark's regular AMK line, the AMK Pro line features diecast parts as well as light-up features. In Prime's case, his eyes will light up when tapping his head with a magnet. The feature requires one CR927 battery which is not included.

:The fully assembled figure resembles the ''Masterpiece'' Convoy 3.0 and features an opening Matrix chamber and fully articulated hands, eliminating the need for alternate hands. Both the ion blaster and Megatron gun can be wielded by his hands, though removing the stalk from the Megatron gun makes this much easier.

:The figure was redecoed into Nemesis Prime.

{{-}}
{{anchor|AMKHasbroEdition}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-(Hasbro-Edition).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Hasbro Edition, 2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Stand with Teletraan-1 Backdrop

:The AMK Pro Optimus Prime kit is re-released under the "Hasbro Edition" branding. In this release, the die-cast parts have been replaced with plastic, and the light-up feature and the Megatron gun accessory are no longer included. In addition, Prime's display stand also comes with an additional Teletraan-1 backdrop for the arm unit.

{{-}}
{{anchor|AMKComboSet}}
[[File:TF-Yolopark-AMK-Pro-20cm-Optimus-Prime-and-Megatron-Combo-Set-(Hasbro-Edition).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1d1|'''Megatron and Optimus Prime Combo Set''' (2024)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Energy Mace, Light Sword, Laser Pistol, Two display stands (Teletraan-1 Backdrop, Ark Backdrop)

:The "Hasbro Edition" of the AMK Pro Optimus Prime kit is also sold as a two-pack with the same line's Megatron. The 2-pack also comes with a unique pin.

{{-}}{{anchor|AMKClear}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Clear Color)''' (AMK Pro, 2024)}}</ul>
:*''Accessories'': Stand, [[Ion blaster]], [[Energon-axe]], [[Matrix of Leadership]], Megatron gun mode

:Released exclusively for the Cybertron Con 2024 in Shanghai, this Optimus Prime is a translucent redeco of the AMK Pro kit.

{{comingsoontoy}}
{{-}}{{anchor|2025AMK}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (AMK, 2025)}}</ul>
:*''Accessories'': [[Ion blaster]], [[Matrix of Leadership]]

:This AMK Optimus Prime only comes with his Ion Blaster and the Matrix of Leadership. In addition, He also features cartoon-accurate deco.

{{comingsoontoy|June 2025 release}}
{{-}}

===AMK Mini Series===
[[File:TF-Yolopark-AMK-Mini-Series-Optimus-Prime.jpg|thumb|upright=1.66|Swap my right arm with Megatron's so I could go to the offensive!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories'': 2 additional pairs of hands (Splayed, Pointing), [[Ion blaster]]

The ''AMK Mini Series'' Optimus Prime is a smaller version of the character, featuring swappable hand parts and his usual Ion Blaster.

:Initial images of the kit's hand-painted prototypes showed Prime utilizing a desaturated blue and red. His white parts are slightly darker, while his grill and abs are flat grey, and the chest windows are white. Unlike the prototype, the blue paint on the crotch is missing in the final product.

Optimus Prime is sold as either an individually marked single, a 2-pack with the same line's Megatron in a single box, or as a blind-box figure. This mold was also used to make [[Nemesis Prime (G1)|Nemesis Prime]] for the blind-box line, and [[Delta Magnus]] for the Agabyss-organized ''[[BotCon]] 2024'' exclusive House of Magnus BotCon VS Set.

{{-}}{{Anchor|AMKMiniIDW2005}}
<ul class="iconlist">{{Bp-a1|'''Orion Pax (IDW)''' (2025)}}</ul>

:This ''AMK Mini Series'' kit is based on Orion Pax's appearance in the 2005 ''IDW'' comics.

{{comingsoontoy}}
{{-}}

===BMK===
[[File:Yolopark-BMK-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Accessories'': [[Ion blaster]]

:The ''BMK'' (Which stands for "Beginner Model Kit") Optimus Prime is a larger version of the ''AMK Mini'', with the design being based on the ''AMK/Pro'' release. As with other ''BMK''s, Optimus features similarly basic articulation, consisting of a ball-jointed head, ball-jointed shoulders, single-axis 90-degree elbows, a rotating waist, and slightly swiveling ankles...that's it.

{{-}}

==Blokees==
===Galaxy Version===
{{anchor|Galaxy Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot/Decepticon insignias

:Released in the first wave of ''Galaxy Version'' line of blind boxes, [[Blokees]] Optimus Prime is a roughly 4-inch tall, highly-articulated, and non-transforming snap-on model kit of the Autobot leader. He is built on a "Standard Body" skeleton shared with other Blokees figures in the line, but with different body pieces to make them distinct. As advertised in the box, Prime has a pull rate of 1 in every 12 boxes, or three times across four cases.

:Prime comes with a pair of closed and open hands, along with a left hand molded in a pointing position exclusive to this figure. He also comes with his trademark Ion Blaster and Energon axe weapons—the former can be plugged into the closed hands, and the latter can be plugged into either wrist. The barrel of the Ion Blaster is compatible with the blast effects included with Ironhide, Megatron, and Skywarp. He also has a stand with four studs on top, which he can plug into and connect to similar stands. Optimus can also accommodate the jetpack included with Sideswipe, which was released as part of the ''Shining Version'' lineup.

:If one chooses, Prime's inner shoulder parts and elbow joints can be swapped with the red-colored pieces from the same lineup to create a more cartoon-accurate coloration.

:His body parts are redecoed to make ''Galaxy Version'' [[Optimus Prime (SG)#Blokees|Shattered Glass Optimus Prime (IDW)]], [[Ultra Magnus (G1)/merchandise#Blokees|Ultra Magnus (DW)]], and [[Nemesis Prime (G1)#Blokees|Nemesis Prime]].

{{-}}{{anchor|BlokeesMetallic}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (2023)}}</ul>
:*''Series:'' '''Galaxy Version 01 - Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), pointing left hand, ion blaster, Energon Axe, holdable Autobot and Decepticon insignias

:The chase figure of ''Galaxy Version'' 01, with a much slimmer pull rate of 1 in every 36 boxes, i.e. once in four cases. Prime is redecoed in a metallic sheen, save for the joint pieces along with more show-accurate deco on the crotch, thighs, back, and shins. He comes with the same accessories as his regular counterpart.

{{-}}
{{anchor|BlokeesPink}}
[[File:Blokees Cybertron Con 2024 Pink OP.jpg|thumb|upright=1.4|Not the kind of [[fandom:gundam:Trans-Am_System|Trans Am]] you'd expect Optimus Prime to turn into.]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Pink)''' (Galaxy Version, 2024)}}</ul>
:*''Accessories:'' Pair of open hands, one pointing left hand, Energon Axe, Ion Blaster, Matrix of Leadership with support stand

:Released exclusively for the Cybertron Con 2024 event, this Optimus Prime kit is sold as a pre-assembled redeco of the first Galaxy/Shining Version kit, featuring opaque and translucent <s>[[energon]]</s> pink livery, and omits the light-up feature. He comes with all weapons and hand accessories from the original Galaxy Version release and the Matrix/support stand from the Shining Version.

:This Optimus Prime is limited to 999 units, with 400...no, 100<ref>{{citesocial|quote=Dear Fans, We sincerely regret to inform you that the on-site sales of the exclusive item - Optimus Prime (Pink) at the 2024 Transformers Cybertron Con have been temporarily canceled. We apologize for any inconvenience this may cause! As of today (December 6), we have sold 100 units, 300 remaining units would be sold through other sales channels, please stay tuned for our further announcements. Thank you for your understanding and support!|link=https://twitter.com/BlokeesOfficial/status/1864925074991780214|name=BLOKEES.OFFICIAL|site=Site Formerly Known as Twitter|year=2024|month=12|day=06}}</ref> sold at the convention, and the rest distributed through online and physical stores across mainland China.

{{-}}{{anchor|GVParallelUniverse}}
[[File:Blokees-TF-Galaxy-Version-06-IDW-Optimus-Prime.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The sixth wave of the ''Galaxy Version'' blind boxes features an Optimus Prime based on his design and coloration from the IDW story [[The Transformers: Stormbringer|''Stormbringer'']]. In addition to the new hand runner introduced in the 4th wave, Optimus comes with his twin cannons and blaster accessory, complete with its blast effect. Like the other ''Galaxy Version'' kits since Wave 5, Optimus features a slightly upgraded suite of standard body parts, notably the sturdier pre-assembled hinge joints and the multi-colored head piece with color-coded eyes.

:As advertised in the box, he has a pull rate of 1 in every 12 boxes.

{{-}}
[[File:Blokees-TF-GV-06-Hidden-Orion-Pax.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 06 - Parallel Universe'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), blaster, blast effect

:The chase figure of ''Galaxy Version'' 06, with 1:36 odds, this Optimus Prime (now called "Orion Pax") kit is a redeco of the kit above, representing the force field-equipped coloration activated by Trailbreaker in "[[Elegant Chaos Part 1: All Our Parlous Yesterdays]]".

{{-}}{{anchor|BlokeesIDWTrans}}
<ul class="iconlist">{{Bp-a1|'''IDW-Optimus Prime (Transparent Edition)''' (2025)}}</ul>
:*''Accessories:'' Pair of open hands, pair of wrist blasters, Ion Blaster

:A translucent redeco of ''GV 06'' Optimus Prime with an iridescent finish, coming pre-assembled in blister packaging. This figure had a run of 999 units, with the first 61 distributed at an event in Chengdu Station, China on June 1, 2025.

{{-}}{{anchor|GV08}}
[[File:Blokees-TF-GV08-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster

:The eighth wave of the ''Galaxy Version'' blind boxes features another new mold of Optimus Prime in a Generation 1-inspired look, but with a new set of outward forearm armor, and he only comes with his Ion Blaster. In addition to the ball-jointed waist from the previous entry, Optimus also features updated articulation, including a slide-down hip joint axis, rotating upper thigh joints, and improved double-jointed knee articulation, similar to his wave mates. This Optimus can also accommodate Sideswipe's backpack from the ''Shining Version'' line.

:Because the newly designed knee joints are made to fit the narrow gaps in the thighs and lower legs, they are incompatible with joints from previous releases, including those used for the elbows.

:If one chooses, Optimus' forearm armors can be omitted for greater accuracy.

:Along with the rest of the wavemates, Optimus is first revealed at Blokees' booth at the IBTE 2025 (Indonesia International Baby Products & Toys Expo) event.

{{-}}{{anchor|GV08Hidden}}
[[File:Blokees-TF-GV08-Optimus-Prime-Hidden.jpg|thumb|250px|Thanks for helping me... pull myself together...''I guess.'']]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hidden Style)''' (2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''
:*''Accessories:'' Spare balljoint piece, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, half-dead chest plate, metal splinter

:The chase figure of ''Galaxy Version'' 08, with the standard chase odds of 1 in every 36 boxes, this kit of Optimus Prime is a redeco of the regular kit above in metallic paint and molded plastic, featuring a "half-alive, half-dead" appearance. In addition to his identical accessories, Prime features an alternate front chest block with a gash that is compatible with the included metal splinter (referred to as an "Energon Axe"...okay.).

{{-}}
<ul class="iconlist">{{Bp-a1|'''Metroplex''' (Galaxy Version, 2025)}}</ul>
:*''Series:'' '''Galaxy Version 08 - One Shall Fall'''

:The ''Galaxy Version'' Metroplex kit comes with a non-poseable figurine (and obviously out of scale) of Optimus Prime, and he can be pegged onto one of his open-palm hands. As he was molded from merely dark gray plastic, he can be painted in full color (or onto any of the other characters that share his appearance) if you wish.

{{-}}

===Shining Version===
{{Anchor|Shining Version}}
[[File:Blokees-TF-Shining-Version-01-Shining-Roll-Out-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 01 - Shining Roll Out'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (weapon-holding, splayed), ion blaster, Energon Axe, Matrix of Leadership with support stand, holdable Autobot and Decepticon insignias

:Released in the first wave of Blokees' ''Shining Version'' line, this version of the ''Galaxy Version'' Optimus kit now features painted translucent face and chest parts, and a torso frame that lights up upon shaking (or at least just lightly tap some areas on the torso), causing the eyes and the Matrix pattern tampographed on his chest window to glow for a limited time. In addition to his identical accessories from the Galaxy Version release, Optimus also comes with a single Energon Cube, a separate Matrix with a support stand, and a new, larger figure stand.

:The Matrix features a pair of tabs on each handle, compatible with most ''Galaxy/Shining Version'' kits that include open-palm hands, not just Prime.
{{-}}{{anchor|BlokeesG1Toy}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 pairs of hands (fists/weapon-holding, open-palm), ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:The second wave of the ''Shining Version'' series introduced a second Optimus Prime mold styled after his [[Optimus Prime (G1)/toys#The Transformers|original Generation 1 toy]], complete with an ion blaster modeled after it. As with the first ''Galaxy Version'' kit, this Optimus can accommodate Sideswipe's backpack from the ''Shining Version'' line.

{{-}}{{anchor|BlokeesG1ToyMetallic}}
[[File:Blokees-TF-Shining-Version-02-Shining-1985-Optimus-(Secret).jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Secret Figure''' (Shining Version, 2024)}}</ul>
:*''Series:'' '''Shining Version 02 - Shining 1985'''
:*''Accessories:'' Spare balljoint piece, figure stand, 2 open hands, ion blaster, [[Energon]] cube, holdable Autobot and Decepticon insignias

:This chase variant of the above toy-style mold is, like the ''Galaxy Version'', redecoed into metallic colors along with more toy-accurate tampographs and retains the same accessories. The eye and window pieces are now molded with orange-ish red translucent plastic instead of blue.

{{-}}{{anchor|ShiningPax}}
[[File:Blokees-TF-Shining-Version-03-Orion-Pax.jpg|thumb|upright=1.66]]
<ul class="iconlist">{{Bp-a1|'''IDW Orion Pax''' ([[2025]])}}</ul>
:*''Series:'' '''Shining Version 03 - Shattered Universe'''
:*''Accessories:'' 2 pairs of hands (fists/accessory-holding, splayed open-palm), Gun, figure stand

:The third wave of the ''Shining Version'' series introduced a new mold styled after his Orion Pax appearance in ''IDW Publishing'''s "Spotlight Orion Pax" comic. As with later Galaxy Version kits since Wave 5, Orion features sturdier pre-assembled hinge joints.

:Since Orion's chin is slightly too long, fully inserting the ball joint may cause his head to ''slightly'' look upwards. To prevent this, insert the ball joint into Orion's head socket first, and then attach it to the torso frame's peg hole until you feel the friction between the joint and the hole without fully inserting it.

:If you're a speed builder, be mindful when attaching the pre-assembled joints; Unlike the symmetrical joints from earlier waves, the pegs on both ends of these joints are designed to connect to specific pieces; The tabs with slightly smaller holes are intended for the upper arms and thighs, while the regular tabs are meant for the forearms and lower legs. While an incorrect knee joint assembly may cause it to very slightly lean when standing straight or in an A-stance, an incorrect elbow assembly won't be noticeably affected unless you're looking very closely.

{{-}}

===Box Sets===
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Galaxy-Version-01-Roll-Out-Optimus-(Exclusive-Yearly-Version).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon''' (2024)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, Energon Axe, Matrix of Leadership with support stand, figure stand, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:This special edition box set included [[Electrum]]-inspired gold redecoes of ''Shining Version'' (See above) Optimus Prime as well as [[Prowl (G1)/toys#Exclusive Yearly Version|Prowl]], [[Ironhide (G1)/toys#Exclusive Yearly Version|Ironhide]], [[Long Haul (G1)/toys#Exclusive Yearly Version|Long Haul]], and [[Starscream (G1)/merchandise#Exclusive Yearly Version|Starscream]], where they also receive translucent redecoes of face and chest parts painted on.

:As with the rest of his pack-in mates in this set, Optimus suffers from a case of [[Gold Plastic Syndrome]], as his molded gold hinge joints can potentially snap off due to the swirly plastic.

{{-}}
{{Anchor|Exclusive Yearly Version}}
[[File:Blokees-TF-Yearly-Version-Set-2-Optimus-Prime-(G1-Toy).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1d1|'''Yearly Version- The Golden Lagoon - Defence''' (2025)}}</ul>
:*''Accessories:'' 2 pairs of hands (open, closed/weapon-holding), ion blaster, figure stand, blast effect, 2 impact effects, holdable Autobot and Decepticon insignias, five Energon Cubes

:The 2025 Yearly Version box set now features an Electrum-inspired redeco of the toy-based ''Shining Version'' Optimus Prime kit. In addition to the identical accessories, he also comes with two additional impact effects for the figure stand.

:Like the rest of this box set's kits, Optimus' hinge joints are now molded in a more mustard yellow-ish plastic, reducing the Gold Plastic Syndrome-related issue plagued from the previous release.

{{-}}

===Action Edition===
[[File:Blokees-TF-Action-Edition-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Action Edition, 2024)}}</ul>
:*Accessories: Ion Blaster, Energon-Axe, Jetpack, Wrist Communicator, Holomatter avatar, Matrix of Leadership, Index finger parts (Fist, Pointing, Trigger-finger), display stand with magnet-powered faction symbol block

:The "Action Edition" Optimus Prime is a 7-inch (approx 18cm) model kit with a slightly more complex build and features an inner frame (equivalent to the ones used for ''Bandai'''s "Master/Perfect/Real Grade" kits) with greater articulation points than his other ''Galaxy Version'' toys. In addition to his two signature weapons, the removable Matrix of Leadership, and the jetpack, Optimus also comes with a hologram readout and wrist comm pieces to attach to the left forearm, with each of those parts featuring two different types of stickers. The articulated hands also feature two additional index fingers, a straight pointing piece, and a slightly curved piece for the Ion Blaster's trigger. A magnetic component in his display stand's faction symbol activates the light-up features that illuminate his eyes and the Matrix. An additional sticker sheet and extra yellow-colored eye parts can be used to create a toy-accurate version of this kit.

:If one chooses, the middle-to-pinky fingers ''can'' be (carefully) sliced into individual pieces as they also feature individual ball joints for each finger.

{{-}}

===Defender Version===
{{Note|Every case before the 5th wave comes with a random Commemorative Card, with 10 Common, 1 Gold, and 1 Silver for each out of every 12 cards.}}
{{anchor|DefenderTruck}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-truck.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Vehicle''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''

:Released as part of the first ''Defender Version'' line of blind boxes, this ''Blokees'' kit of Optimus Prime is molded in his truck mode. The trailer hitch also comes with the Auto-Launcher from the Combat Deck, where it can be extended and wielded by other figures from the same line, allowing them to ride Optimus like an adorable little scooter. The Auto-Launcher can be detached from the bar, allowing the figure to be displayed as a regular-looking truck.

:The Combat Deck/Trailer and the Roller from the 5th wave can accommodate this kit, with the Auto-Launcher able to be mounted inside the trailer.

:This mold was also used to make [[Optimus_Prime_(SG)#SGDefenderVehicle|his Shattered Glass counterpart]].

{{-}}{{anchor|DefenderRobot}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-robot.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:This ''Defender Version'' kit of Optimus Prime is a 2.2-inch (5.5cm) figure, a few inches smaller than the ''Galaxy Version'' kits, but still articulated. Unlike his ''Galaxy Version'' kit, Optimus only comes with an Ion Blaster.

:Like most of the larger Galaxy Version kits, Optimus features a simple neck joint that is colored to match his optics, allowing it to be see-through from his head's eye holes. This mold was also used to make [[Ultra_Magnus_(G1)/merchandise#Defender_Version|Ultra Magnus]] and [[Optimus_Prime_(SG)#Defender_Version|Prime's Shattered Glass counterpart]].

{{-}}{{Anchor|SpecialGalaxyType}}
[[File:Blokees-TF-Defender-Ver-01-Special-Galaxy-Type-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Special Galaxy Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster

:One of the four chase figures of the line, the "Special Galaxy Type" Optimus Prime is a metallic redeco of the figure above, and he also features additional details to make him more accurate to the show. One chase variant is guaranteed per case, meaning this Optimus appears in five out of every twelve cases.

{{-}}{{Anchor|SpecialArmorType}}
[[File:Blokees-TF-Defender-Ver-01-Optimus-Prime-100%-Firepower.jpg|thumb|250px|All of these armaments and yet he insists on crippling the 'Cons' joints without destroying them.]]
<ul class="iconlist">{{Bp-a1|'''Special Armor Type Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 01 - Galaxy Shining'''
:*''Accessories'': Ion Blaster, Forearm cannon, Wing pack

:The "Special Armor Type" version of the Optimus Prime kit is an alternate version of the Special Galaxy Type chase figure, decked out in metallic paint, and comes with additional armaments such as the forearm cannon and a wing pack that is based on the one used by his ''Cybertron'' namesake. Unlike the chase variant above, this Optimus has an '''''even''''' slimmer pull rate of '''1''' in every 144 boxes, or once per twelve cases.

{{-}}{{anchor|DV05Brilliant}}
[[File:Blokees-TF-DV05-SG-Brilliant-Optimus-Prime.jpg|thumb|300px]]
<ul class="iconlist">{{Bp-a1|'''Brilliant Optimus Prime''' (2024)}}</ul>
:*''Series:'' '''Defender Version 05 - Traitor to Tyranny'''
:*''Accessories'': Energon Axe

:The fifth wave for the Defender Version kit comes with a translucent redeco of Optimus Prime, whose Ion Blaster is replaced with an Energon Axe. Additionally, he comes with one of the three random plastic commemorative coins (featuring etchings of Jetfire's head, Galvatron's head, and Jetfire's vehicle mode) in every case that contains the kit. Each coin is molded from translucent plastic and features a gradient pattern painted with gold.

:As with other clear-colored Brilliant/Glittering kits, the translucent plastic-molded ball-and-socket joints tend to be somewhat loose even when it's built out of the box, compared to the opaque and metallic kits.

{{-}}
===Blokees Wheels===
{{Note| Due to licensing-related reasons, this blind-box line was not released in the US market.}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''

:This 1/64-scale vehicle kit of Optimus Prime's truck mode is part of the new ''Blokees Wheels'' series of blind-boxed ''Transformers'' products. The design is based on Don Figueroa's interpretation of the character's Cybertronian truck mode, as seen in IDW's 2009 -2011 ongoing series. The kit also features PVC tires and an "innovative high-density" ABS material for the car shells. Additionally, Optimus Prime features a universal Chassis Connector, which is used by all vehicle mode kits in the lineup.

:This Optimus Prime has a pull rate of 1/24.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Hologram Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with a slim pull rate of 5/144, the "Hologram Edition" Optimus Prime is a translucent redeco of the kit above. It includes an additional translucent blue driver minifigure, which is also designed to fit in the other vehicle kits with open seats.

{{-}}
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Titanium Edition)''' (2025)}}</ul>
:*''Series:'' '''01 - Roll Out!'''
:*''Accessories:'' Driver figure

:One of the two chase kits with the slimmest pull rate of 1/144, the "Titanium Edition" Optimus Prime is a metallic redeco of the original kit, and he comes with the same driver figure form the Hologram Edition release of the kit.

{{--}}

==Combot==
[[File:Unix-Square-Combot-Optimus-Prime.jpg|thumb|300px|Autobots, Transf-I mean, Partsform and roll out!]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (2024)}}</ul>
:*''Accessories:'' 5 pairs of hands, Ion Blaster, Energon Axe, Energon Sword/Blaster Bayonet, Vehicle mode frame

:Produced by [[Unix Square]], a toy company based in Hong Kong, [[Combot]] Optimus Prime is an action figure approximately the size of a Voyager Class figure, and he features an impressive 50 points of articulation and includes a hefty amount of die-cast metal for a weighty premium feel, and light-up features for both the eyes and the Matrix of Leadership. In addition to his iconic Ion Blaster, Optimus also comes with a handheld Energon Axe and a live-action movie-inspired Energon Sword. The sword can also combine with the Ion Blaster to create a Bayonet.

:As the LED unit is wired on the neck, Optimus's head cannot swivel in a full 360 degrees.

:Unlike most non-Hasbro/Takara merchandise of the character on this page, Combot Optimus Prime can transform—albeit loosely defined due to licensing restrictions—into a stylized cab-over using full partsforming, while requiring the included vehicle mode frame.

{{-}}

==Auldey==
{{Note|All releases come with their respective trading cards.}}
[[File:Auldey-TF-AAE-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-001'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of [[Auldey]]'s "Alpha Action Elite (AAE)" series of blindboxes, this Optimus Prime is a 5-inch non-transforming but highly articulated action figure, and he comes with his additional pairs of hands and his signature ion blaster. Prime also features a removable chest window piece, which reveals an empty cavity for a future Matrix of Leadership accessory.

:As advertised in the box, the lineup had an 11/70 probability of getting Prime. This mold was also used to make [[Nemesis Prime (G1)#Auldey|Nemesis Prime]].

{{-}}{{anchor|auldeymetallic}}
[[File:Auldey-TF-AAE-Optimus-Prime-(Metallic).jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime (Metallic Color)''' (Alpha Action Elite, 2024)}}</ul>
:*''Series:'' '''Defend Iacon!'''
:*''ID Number'': '''AAE-000'''
:*''Accessories:'' 4 pairs of hands, Ion Blaster
{{toydesigner|[[Lam Ahtek]]}}

:The chase figure of the first lineup with a much slimmer 1/72 probability, this Optimus Prime is a redeco and retool of the figure above, featuring a toy-based deco and parts such as the head and legs. In addition, Prime also comes with a sheet of customer-applied stickers to complete the rest of his toy-accurate details, which include the chrome yellow-gold areas on his front hip.

{{-}}{{anchor|auldeyoptimal}}
[[File:Auldey-TF-AAE-Select-Optimus-Prime.jpg|thumb|250px]]
<ul class="iconlist">{{Bp-a1|'''Optimus Prime Optimal Set''' (Alpha Action Elite Select, 2025)}}</ul>
:*''ID Number'': '''AAE-S 001'''
:*''Accessories:'' 16 pairs of hands, Ion Blaster, Energon Axe, Matrix of Leadership, Jet pack (with Blast effects), 2 pairs of alternate communication panels, display stand
{{toydesigner|[[Lam Ahtek]]}}

:Sold as part of Auldey's non-blindboxed "''Alpha Action Elite Select (AAE-S)''", a subline that also features re-releases of previous figures with more accessories and premium details, ''AAE-S'' Optimus Prime is a redeco and retool of the original AAE blindboxed figure. Deco-wise, Optimus features metallic paint on the red and blue plastic, along with some metallic silver details. He also comes with additional accessories, such as the Energon Axe, Megatron's pistol form, a jetpack with two Blast effects (also compatible with the Ion Blaster), an additional pair of interchangeable communication panels, and four extra pairs of hands that need trimming from their runners. Additionally, Optimus includes retooled areas and newly molded parts, such as a new neck joint that allows him to look up further, an opening chest window that grants access to his Matrix Chamber, and a display stand with an adjustable posing arm that plugs into multiple holes on his back and the soles of his feet for midair action poses.

:Optimus is also compatible with the Seeker-based back and the head from the same entry's Starscream, recreating the latter's disguise in [[Megatron's Master Plan, Part 1]].

{{--}}

==Ty==
* '''Beanie Bouncer Optimus Prime'''
[[File:Bouncer-op.jpg|thumb|200px|If we want to get technical, this is actually [[Diac]].]]

:A bouncing ball covered in fur produced by Ty, creator of the more famous Beanie Babies and Beanie Boos. Optimus Prime's head crests are represented by additoinal pieces of felt material coming out of the ball. Opposite the face is an autobot symbol.

:Opitmus Prime is also available in a three set alongside Megatron and Bumblebee.

==References==
{{reflist}}
{{-}}
[[Category:Attacktix]]
[[Category:Combiners]]
[[Category:Decoys]]
[[Category:Generation 1 Autobots]]
[[Category:MyClone]]
[[Category:Robot Heroes]]
[[Category:Titanium Series]]
[[Category:Bitfig]]
[[Category:ULTIMATES!]]
[[Category:Transformers Character Card Autobots]]