Editing Gold Plastic Syndrome

{{featured}}
[[File:Electrogoldplasticsyndrome.jpg|right|upright=2.5|thumb|Ouch.]]
'''Gold Plastic Syndrome''' (commonly shorthanded to '''GPS''') is fandom terminology used to describe the phenomenon of a toy's [[plastic]] decomposing and becoming brittle to the point of shattering or crumbling under minimal-stress conditions. In the most extreme cases, toys have been reported to spontaneously crumble to small bits without any applied force at all, even if they're fresh out of their [[Mint in sealed box|unopened package]]. 

This breakage is different from the relatively more common stress-fracture type of plastic breakage that can occur in some [[Toy|Transformers toys]]; while normal stress fractures are universally heralded by stress marks on the toy, GPS breakage doesn't have that sign; it simply crumbles to pieces. The condition takes its name from the gold plastics of late Generation 1 through to ''Beast Wars'', that have proved the most prone to this sort of breakage. Despite the name, Gold Plastic Syndrome has been known to affect other types of plastic—most of them noted for a pretty metallic swirl in the plastic; the reason it has the GPS moniker is because gold plastic was the first one observed to have this horrific phenomenon.
==Notability==
GPS is widespread among toys made in the tail-end of [[The Transformers (toyline)|Generation 1]], typically the second year of [[Pretender]]s and even some European-market exclusives, ''[[Transformers: Generation 2 (toyline)|Generation 2]]'' and the ''[[Beast Wars: Transformers (toyline)|Beast Wars]]'' series, but examples have surfaced from lines as recent as [[Transformers: Universe (2003 toyline)|''Universe'' (2003)]], the ''[[Star Wars Transformers]]'' and the [[Movie (toyline)|2007 movie]]. Transformers toys are not the only ones to suffer from this; there have been reports of ''[[G.I. Joe (team)|G.I. Joe]]'' and ''[[Visionaries]]'' toys' gold plastics also crumbling seemingly of their own accord; even some ''Power Rangers''/''Super Sentai'' toys have been known to suffer.

The toys most likely to suffer from Gold Plastic Syndrome are those with gold or bronze plastic with a metallic swirl to it. There are other known cases with different colors of plastic—though usually there is a tell-tale swirl in the plastic.

==Cause of GPS==
[[File:GPSSkyquakescopeclose.jpg|upright=1.67|thumb|left|Nooo!]]Because this is not exactly an area of scientific notability there aren't any full studies into Gold Plastic Syndrome that we know about. Basically, it is thought that certain plastics weren't mixed as well as others, possibly because of the metallic pigment or colouring, so they break down more quickly.

It's not much of a theory, really; think more a hypothesis. Here's a more detailed attempt:

{{bigquote|The problem likely arises, as with many composites, when the bonding between the polymer and the dye/particles breaks down. This could occur do to a natural chemical/phase change of the plastic, due to oxidation, for example, or by another mechanism, say the forces incurred by the toy being played with, or more likely, due to some combination thereof. In any case, when the bonds between the particles and the polymers break down, you would get small voids in the plastic structure. If this occurs frequently enough, the structure would become effectively porous (that is, it would be filled with lots of tiny voids/cracks where the polymers and particles have come apart). With even a slight amount of force, some of these cracks/voids could expand, even slightly, to the point where they intersect another void and join, making an even bigger crack. Once a critical crack length is reached, the sample fractures.

So effectively, the plastic becomes more brittle, and this would also explain it "crumbling" as well as cracking.}}
:-Aernaroth suggests a cause for GPS [http://www.allspark.com/forums/index.php?s=&showtopic=57191&view=findpost&p=1174876 on the Allspark]

So what it amounts to is: "The plastic crumbles a'cause it ain't very good."

Hasbro have attributed it to "the amount of gold fleck included in the plastic", and have apparently reduced the amount in similar plastics of more recent vintage to prevent further occurrences.<ref name="hasbrogps">[http://www.transformerland.com/forum/viewtopic.php?t=3481 Hasbro Transformersland.com Q&A, August 2009:] "When we used gold metallic plastic in the past we discovered, along with many of you, that it becomes brittle over time. As we became aware of this situation, we took the necessary steps to reduce the amount of gold fleck included in the plastic to eliminate this issue. Ultimately, this should no longer be an issue due to these corrective steps that we have taken."</ref> Later Hasbro said that they believe they've "alleviated the issues associated with the 'gold' plastic issue" through "trial and error." <ref>http://www.toyark.com/news/transformers-toy-news-2/hasbro-transformers-june-2010-qna-2867/</ref>

All in all, the actual causes of Gold Plastic Syndrome aren't a very big deal to Transformers fans—it's really pretty academic. Of more concern is the ''RESULTS'' (i.e., poor Electro crumbling to bits like a soggy Tim Tam in a cup of coffee), and what to look out for. There's no certain cure here, no fix. If a toy has GPS, it '''will''' die...maybe. See below for a potential solution, at least a temporary one, to GPS.

Seibertron.com has reported that Ace Hardware's "Lub-E" product may prevent GPS breakage, having applied it to an Electro pre-photo-shoot. How true this is still needs some pretty extensive testing, as it may very well be a coincidence that ''that'' specific Electro did not break. Because [[#GPS misconceptions|as noted below]], which toys snap and when (and where) is not exactly consistent....

==The Symptoms==
[[File:SkyquakeGPSback.jpg|thumb|upright=1.67|Gleargh]]
Gold Plastic Syndrome usually has a few clear signs. Knowing how to tell the difference between Gold Plastic Syndrome and normal plastic breakage is very important for a Transformers fan who is collecting vintage toys. It's the difference between giving up on that toy completely (since if it has GPS so will any other sample of the toy) and buying a new copy.
*GPS usually takes place in metallic-coloured plastics, most notably gold plastic and bronze plastic.
*GPS breaks are NOT accompanied by stress fractures. There is usually NOT any visible wear before the breakage. This is really important. Plastic breaks. This is a reality of toy collecting, plastic gets old and it breaks. Gold plastic syndrome is breakage without warning.
*GPS breaks often leave a powdery residue and shards of plastic (though not always), the result of the plastic actually physically crumbling. Take a look at the picture of Skyquake's scope—okay, the bits of his scope—to the right. You can actually see some of the left-over shards of plastic. Keep in mind this picture was taken years after the break actually occurred—these are new shards of plastic which came off these pieces of scope during the process of moving the parts around for photography. Plastic should '''not''' be that brittle or delicate.
*GPS breakages don't need to involve any excess stress or force on a toy—simply handling a toy can cause the breakage. Looking at it funny, sometimes does it. Spitting on it, maybe. Opening its box. ''Anything.'' If your toy breaks despite careful handling it's more likely to be GPS.
*GPS breaks often have rough, uneven edges with no stress lines around them. This is important—usually when plastic snaps it snaps cleanly (as is common with clear plastic), or it bends first (leaving a torn-off piece, or clear stresses around the break). If a break is uneven, with different colours and textures in it, yet there are no stress fractures around the wound, and especially if it leaves a powdery residue as well, it's almost certainly a GPS break. Take a look at the photo of Skyquake to the right for a good example of the ragged break. Okay...not good. What's the other word that's LIKE "good", but not actually good? Oh yeah. Horrifying. A HORRIFYING example.
*GPS plastics will sometimes feel brittle to the touch, sometimes making cracking noises as they're handled. 

A really easy test to tell if you have GPS breakage is this—if a piece breaks off, try snapping it again. If it's normal plastic breakage, the broken piece should bend or bow instead of just snapping like dry wood; there should be some give in the plastic, even if it's a brittle, clear plastic—so you should be able to glue it back into place, or at least get a replacement part. On the other hand, if the broken piece snaps like your grandmother's ankles in a rugby match, then you've almost definitely got Gold Plastic Syndrome.

==GPS misconceptions==
'''ALL GOLD PLASTIC WILL DIE!'''
:Not true. It's only a specific composite of gold plastic only used during a specific era that will die, most prominently used from 1988 (second year Pretenders are notorious for it) and through to about the end of ''Beast Wars'' in 2000, although there are still a few rare cases of post-millennium figures with this issue up until 2007. As far as we know modern toys do not suffer from GPS due to a reduction in the amount of metallic flakes in similar, but more recent toys.<ref name="hasbrogps" /> Toys with flexible nylon-based gold plastics, such as [[Optimus Prime (Armada)|Superbase Optimus Prime's]] elbows, are not susceptible to GPS supposedly because of the plastic's composition.Even on toys well known for GPS, some of their gold plastic is less prone to break. Gold plastic which is nice and thick is much less likely to snap than gold plastic which is thin. Gold plastic which is under constant stress—like that at a joint—is also more likely to break. That said, some really nice solid parts can shatter like eggshells if it's real GPS we're talkin' about.

:Furthermore, there are various examples of figures built between 1988 to 2007 molded in similar-looking gold or bronze plastic that do not suffer from this issue, like [[Blaze Master]], [[Archadis]] and [[San D-Go]].

'''MY TOY BROKE, IT MUST BE GOLD PLASTIC SYNDROME!!!'''
:There are plenty of ways for plastic to break that aren't related to Gold Plastic Syndrome. Repeated stress on a plastic, dropping a toy, a toy with metal parts that damage the plastic parts, thin plastic, or simply the use of translucent plastic, which is more brittle. Just because a toy breaks doesn't mean it's Gold Plastic Syndrome. Look for the symptoms (listed above) and ask around before assuming that every single copy of this toy is destined to die a painful and horrible death.

'''ONLY GOLD PLASTIC GETS GOLD PLASTIC SYNDROME!'''
:Not ''quite'' true. Observations suggest that it should probably be called "Metallic Plastic Syndrome". It's those metallic plastics, most commonly the gold and bronze plastics used for almost ten years by Hasbro and Takara, from around 1989 to 1998. However, it's possible that any colour of plastic could be susceptible, given enough time. So keep a close eye on your Fire Convoy, kids; that pretty metallic swirl in his plastic isn't promising...maybe.

'''MY TOY IS DOOMED!'''
:Okay...not ''exactly'' a misconception. Your toy is ''probably'' doomed...but there is a little bit of light at the end of the tunnel.

:You see, the thickness of the plastic seems to affect GPS. Also, the amount of stress on it affects it. While some toys are known for breaking just by having their packages opened—guys like Randy, Roadblock and ''Generation 2'' Slingshot—others, like Skyquake and Pyro, can remain intact if they are handled with extreme care (and never ever transformed, of course) because the parts that are made of GPS plastics are large and thick and otherwise robust. GPS is an inconsistent process—eventually your toy '''will''' crumble, but there's no telling how long it will take. With delicate handling (read: almost none) you can maintain a GPS-afflicted toy in your collection for quite some time.

:Also remember that the evidence for Gold Plastic Syndrome is ''completely'' observational. There seems to be some evidence that different plastic batches were less affected, that some releases of the toys were less affected. You might luck out and get an Electro that never crumbles to dust, or you might be really unlucky and get multiple Electros, all of which break horribly. This page is a caution more than anything else. Know what you're getting into when you buy a toy known to be afflicted by GPS.

==Toys commonly associated with Gold Plastic Syndrome==
====Generation 1====
*'''[[Scorponok (G1)/toys#BlackZarak|BlackZarak]]'''
:Rather depressingly, BlackZarak's feet and shield tend to shatter. Since both parts have to be under stress to function as intended, this particularly expensive toy is almost never intact. The Black Roritchi redeco of [[Fasttrack (Scorponok)|Fasttrack]] included with him is almost ''entirely'' made of gold plastic. Good luck...
*'''[[Bristleback#Toys|Bristleback]]'''
:Bristleback on his own isn't in ''too'' much danger, as he has a fairly minimal amount of moving parts. However, when combining with the other Monster Pretenders, sliding the Monstructor fist in place will usually be enough to create a large crack through his legs, sometimes even splitting them entirely. Watch out for his fist-holes as well, as the plastic is very thin around that area.
*'''[[Roadblock (G1)#Toys|Roadblock]]'''
:The innermost robot has three peg holes, two in the fists and one on his back, that are particularly susceptible to cracking and shattering, leaving many a Roadblock hand-less.
*'''[[Skyhammer (G1)#Toys|Skyhammer]]'''
:One of the most notorious toys. The entire bottom of his large vehicle shell is made of gold plastic and it is very prone to breakage. Not to mention how much gold plastic is on his inner shell and his [[robot mode]].
*'''[[Slog (G1)#Toys|Slog]]''' 
:Slog is notable because his gimmick requires another toy (Birdbrain) to be inserted up inside his gold sections. His thin gold sides will crumble like a good fruit cake (just not as moist or delicious) if Birdbrain jostles around too much.
*'''[[Killbison#Toys|Killbison]]'''
:His arms and most of his torso (including the head, which you have to ''shove into the port'') are gold plastic. Considering how combiners worked in G1, this basically means that trying to combine a G1 Liokaiser is probably going to make you end up in tears as your Killbison shatters like a cheap knockoff toy.
{{-}}

====Generation 1-2 Transitional Phase====
[[File:GPSSkyquakescope.jpg|thumb|Well, ''crap''.]]
*'''[[Skyquake (G1)#Toys|Skyquake]]'''
:Skyquake is another toy notable for having a gimmick which makes the whole thing worse. Skyquake actually has two colours of metallic plastic on him: One is a dark bronze, the other a light bronze. It is the light bronze plastic that is most likely to break. Unfortunately, the light bronze plastic also forms Skyquake's scope. You're supposed to put a Predator jet's scope slide into that part of him. But the union is not pleasant for the one on the receiving end. Take a look at the picture to the right. These are the parts left of Skyquake's scope after another Predator tried to unite with him. Actually...that's not even all the parts, that's just all that could be found.

:This is a gimmick which should never be used by modern collectors. Never, ever, ever, ever. Watch out for the movable panel on the back of his head, too, as it's the same light bronze plastic.

*'''[[Thunder_Clash#Toys|Thunder Clash]]'''
:Thunder Clash's problems are mildly less obnoxious than Skyquake's due to more judicious use of metallic plastics, but the toy's ankles ''will'' break extremely fast, as will the handgun peg if not handled with care.

*'''[[Pyro (G1)#Toys|Pyro]]'''
:Although Pyro's gold plastic parts are mostly thick enough that he can safely be moved in either mode, if you transform him you WILL crack him in half at the waist.  Eventually, the elbow ratchets will also start to shatter from the constant spring stress.  The rifle handle is also prone to sheering off.

{{-}}

====Generation 2====
*'''[[Electro#Toys|Electro]]'''
[[File:Electrobrokenknee.jpg|thumb|Oh, God, my knee! MY KNEEEEEEE!!]]

:There's a ''reason'' that Electro sits up at the top of this page. Poor guy just can't catch a break, it seems.

:Wait...actually, no. That's the ''entire problem''. The poor guy totally ''can'' catch a break. All the time. Because he is ''designed to die''. Basically ''anything'' on Electro's body is susceptible to shattering like glass the ''second'' you touch it. 

*'''[[Slingshot (G1)#Generation 2|Slingshot]]'''
:G2 Slingshot is ''infamous'' for being made almost entirely of gold plastic, and he has been reported to come apart straight out of the package.<ref>http://groups.google.com/group/alt.toys.transformers/msg/2b8b3dec846e5479?hl=en</ref> Worse, he's known for being another toy whose gimmick will destroy him, like Killbison and Skyquake. Slingshot's head is a post which is designed to plug into [[Silverbolt (G1)|Silverbolt]] (or any other Scramble City leader), so that Slingshot can form an arm or a leg. Doing this will destroy your Slingshot.
{{-}}

====Beast Wars====
[[File:Goldplasticgrimlock.jpg|thumb|A mighty Dinobot warrior...bested by his own crumbling joints.]]
[[File:Brownplasticsyndrome.jpg|thumb|The one part of Megatron's Movie Jazz cosplay he ''didn't'' want to recreate.]]
*'''[[Grimlock (G1)/toys#Beast Wars|Grimlock]]'''
:Just..take a look at the picture to the right. Grimlock's gold plastic can break pretty damned hard. The fact that he uses a gold plastic ball joint for his hips is not really a good thing. Common breakages include the insides of his legs (where his chest pegs into them in [[beast mode]]) and his mutant face (which is very thin). Grimlock can survive for a while in a collection, though; the fact that most of his problems occur in robot mode means keeping him in beast mode can extend his lifespan a fair amount.
*'''[[Optimus Primal/toys#OptimalOptimus|Optimal Optimus]]'''
:The sparkly dark brown plastic used for his wheels and turret suffer from this. The block that holds the batteries is the most likely to break, as the "soft" ratchet joint requires the affected plastic to bend.
*'''[[Randy (BWN)#Toys|Randy]]'''
:Poor, poor Randy. This is one of the ''legendary'' Gold Plastic Syndrome toys. Imagine, if you will, a toy with an entirely spring-loaded transformation...''made entirely out of gold plastic''. Ouch, right? Well, don't worry. You'll never have to see what a mess that could be, because this toy will shatter into a million pieces the moment you open it. Ouch.
*'''[[Megatron (BW)/toys#MegaTransmetal|''Transmetal'' Megatron]] (Hasbro version)'''
:He'll snap at the waist, the shoulders, the ... well, anything that's made of that brown plastic. This is technically Brown Plastic Syndrome, but regardless of what you call it this toy will end in sadness. The Japanese ''Metals'' version uses black instead of the brown, so it seems to be immune. The fragility of the waist may be due to GPS, a [[design flaw]], or a combination of both; the Takara version's immunity to this issue (because it's brown parts are black plastic) seems to suggest that GPS may have a role.
*'''[[Silverbolt (G1)#Beast Wars|Silverbolt]] ([[Magnaboss (BW)|Magnaboss]] component)'''
:Despite having a ''dangerously'' large amount of bronze plastic, Magnaboss Silverbolt is..actually fairly stable. The main breakage point is where his tail connects to his body. As well, [[Skywarp (BWII)|Skywarp]], his Japanese counterpart, is just as likely to suffer from this. That said, just...be careful, okay? Be careful. 
*'''[[Soundwave (BW)#Toys|Soundwave]]'''
:His ''entire fraggin' body'' is composed of gold plastic, so it's a crapshoot. The places on his body where the sides hinge open as part of his transformation are the first to go, however.
*'''[[Torca (BW)#Toys|Torca]]'''
:His legs, tail hinge and sides are prone to Gold Plastic Syndrome.
*'''[[Dinobot (BW)#Beast Wars 10th Anniversary|Beast Wars 10th Anniversary Dinobot]]'''
:Quite impressively, 10th Anniversary Dinobot has ''two'' kinds of metallic swirled plastic, both of which seem to have hit their expiration dates around 2013. In other words, basically any part on him is highly fragile, although he's most likely to break at the neck, hips, and helmet. At this point, keeping the toy MISB is the best way to display him.

{{-}}

====Beast Machines====
*'''[[Snarl (BM)#Toys|Snarl]]'''
:Like Randy, Snarl is an ''atrocious'' example of a victim to Gold Plastic Syndrome; it seems that the longer the figures are left in sealed packages, the more brittle they are upon opening said packages. All manner of extremities will simply snap off of Snarl's body, most easily among these being the ankles.
{{-}}

*'''[[Striker|Dinobot Striker]]''' has an entirely gold plastic dinosaur shell which relies on ball joints to move and shift. He also has gold plastic pegs that tab into gold plastic slots. Transforming Striker is a suicide mission... For Striker.

====Robots in Disguise (2001)====
*'''[[Optimus Primal/toys#Robots in Disguise (2001)|Air Attack Optimus Primal]]'''
:The sparkly brown plastic, like that on Optimal Optimus, can shatter.  This condition most often results in the feet breaking.
{{-}}

====Universe (2003)====
*'''[[Megabolt#Toys|Megabolt]]'''
:Having limbs cast primarily in gold plastic is ''not'' a good thing. Fracture points include his forearms, the holes that lock his arms in place in crawling head mode, lower legs near the knees, and his head.

*'''[[Micromaster]] [[Superion (Universe)#Toys|Superion]]'''
: Large parts of combiner [[kibble]] suffer from GPS, particularly the peg that connects [[Ro-Tor (Universe)|Ro-Tor]] to Superion's torso piece.<ref name="tfwsuper">[http://www.tfw2005.com/boards/transformers-toy-discussion/300674-warning-universe-micromaster-superion-suffers-gold-plastic-syndrome.html TFW2005 thread about Micromaster Superion suffering from Gold Plastic Syndrome, with multiple reports]</ref>  The white painted fists are also highly susceptible to breaking at the clips.
{{-}}

====Energon (2004)====
*'''[[Scorponok (Energon)]]'''
: The pale gold plastic used in several parts of this toy seem to be prone, notably the (largely painted) front panels of the shoulders. The weight of the arms alone when in robot mode can be enough to cause the panels to break and tear in half.
{{-}}

====Cybertron/ Universe (2008)====

*'''[[Repugnus (Cybertron)#Cybertron|Repugnus]]''' is a more recent victim of GPS. His thigh covers and robot mode "hands"/ ''spinosaur'' head are made of black-painted gold plastic. Insertion of his flail weapon into his hands can cause his thin jaw parts break into pieces. His thigh covers are not affected due to their static position and lack of moving parts.

====Star Wars: Transformers====
*'''[[Millennium Falcon]] / [[Han Solo]] & [[Chewbacca]]'''
:Particularly, the Chewbacca half suffers from GPS. His legs can lock up and ultimately snap off. His upper arms are also said to fall victim as well.<ref>http://www.seibertron.com/toys/gallery.php?id=2481&size=0&start=101</ref>

====Transformers (2007)====
*[[Starscream (Movie)/toys#Deluxe Class toys|Protoform Starscream]]
: One of the latest sufferers of GPS. The plastic hinges that connect the two small wings to his body are especially brittle, because the plastic housing the joints is thin and gives way over time to a crumbly mess. 
{{-}}

====Other notable instances====
*''[[Diaclone]] Powered Convoy'' 
:The "[[Vacuum metallizing|chrome]]" version of the [[pre-Transformer]] version of [[Ultra Magnus (G1)/toys#Notes|Ultra Magnus]] has this problem with its swirly ''blue'' plastic.
*'''[[Serpentor]]'''
:While not a Transformer, he is also known to suffer from this problem—especially through his hips, given the leg construction found on G.I. Joe toys of the era.

==Toys often mistaken for having GPS==

A number of toys have gold parts that easily break not due to the plastic used, but due to structural problems with the part designs themselves.

*'''[[Predator (subgroup)|Predator]] [[missile]] launchers'''
:The Predator launcher pegs are notorious for breaking off, but this is due to their size. Those pegs are ''tiny''; many other weapons with a similar peg have the same problem. However, the Predator launchers are worse off, as they are also used by larger figures like Skyquake. Also, the "false" trigger is known to break off, as it doesn't have a hinge, relying on the plastic to bend. (The actual trigger is a small, black, internal piece.) If the Predator launchers actually had GPS, the strength of the spring would cause them literally to explode.

*''[[Movie (toyline)|Movie]] [[Legends Class]] [[Scorponok (Movie)|Scorponok]]''
:Legends Scorponok's tail stinger, originally soft and bendy, tends to harden after a while and then becomes prone to breaking. While the stinger ''is'' made of a golden plastic, the cause for this problem appears to be the use of an inferior plasticizer rather than traditional Gold Plastic Syndrome.

*'''[[Transformers (2010 toyline)|Transformers (2010)]] [[Hunt for the Decepticons]] Leader Class [[Starscream (Movie)/toys|Starscream]]'''
:The presence of various joints sculpted into a gold and brown swirly plastic has scared one too many collectors into fearing he might crumble to dust in the near future <ref>http://www.tfw2005.com/boards/threads/gold-plastic-sindrome-in-the-new-leader-starscream.314901/</ref> <ref>http://www.tfw2005.com/boards/threads/gold-plastic-syndrome-cured-but-when.951406/</ref>, but there are no verified examples of this ever happening. As of now, the figure doesn't appear to be in any tangible risk, since the plastic used is most likely just similar to traditional GPS in appearance.
==Etymology==
The term was coined in an [[alt.toys.transformers]] post made by user Sky Shadow in September 2002.<ref>http://groups.google.co.uk/group/alt.toys.transformers/msg/2b3d532961b2c2dc</ref> A post by [[Dave Edwards|Dave "Zobovor" Edwards]], meanwhile, made in June of the previous year,<ref>http://groups.google.co.uk/group/alt.toys.transformers/msg/6ed7e0f3586f37e4</ref> is the earliest identifiable acknowledgment of the widespread nature of the phenomenon within the Transformers fan community.

Completing the journey from fan term to official term, "Gold Plastic Syndrome" was used by Hasbro designer [[John Warden]] at the ''Transformers Generations'' panel at Comic-Con International 2015 to describe exactly what would not happen to ''Combiner Wars'' G2-style [[Slingshot (G1)|Quickslinger]].

==Fiction==
===''Animated'' cartoon===
At some point during the great war, a vaccine for Gold Plastic Syndrome was developed by [[Red Alert (Animated)|Red Alert]]. {{storylink|Transformers Animated: The AllSpark Almanac II|The AllSpark Almanac II}} [[Swindle, Swindle and Swindle]] claimed to be the only licensee of the cure in the [[Nexus]] Cluster. {{storylink|Ask Vector Prime}}

===Ask Vector Prime===
In [[Primax 185.0 Beta]], the [[S.T.A.R.S.]] weaponized Gold Plastic Syndrome and invented the [[Photodegradation|Photo Degradation Protocol]] in a failed attempt to fight off [[Galvatron (G1)|Galvatron's]] mindless hordes of [[Decepto-Pack]]-enhanced human slaves. {{storylink|Ask Vector Prime}}

===''Timelines''===
[[First Aid (G1)|First Aid]] contracted GPS during the war against the [[Cybertronian (faction)|Cybertronian Empire]]. The disease prevented him from properly combining into [[Defensor]]. {{storylink|Ratchet (G1)/toys#Combiner Wars|Customization class G2 Ratchet bio}}

==External links==
*[http://www.youtube.com/watch?v=qcjAUN5Ssj8 Demonstration of Gold Plastic Syndrome in effect at Youtube]

==References==
{{reflist}}

[[Category:Animated]]
[[Category:Diseases]]
[[Category:Toys]]