Editing Sticker

[[File:BotCon2010-customclassSideswipe.jpg|250px|thumb|Customization class Sideswipe]]
Details on a [[Transformer]]s toy that are not molded, [[tampograph|printed]], or [[Paint operation|painted]] on may be provided by the application of one or more '''stickers''' - also known as labels or decals.  

Stickers are a flexible substrate with colors and designs printed on one side and an adhesive substance on the other. Generally they are stuck to a wax-coated protective sheet before use, with the individual stickers being die-cut from a single sheet of backing while attached to this waxy sheet. Many toys have stickers already applied to them at the manufacturing plant.

Stickers were abundant throughout the first decade of the ''Transformers'' franchise, but since then have been all but totally replaced with other detailing methods.


==Use in Transformers==
===Generation 1===
{{toystub}}
[[File:G1-toy Rewind.jpg|thumb|upright=1.1|[[Rewind (G1)|Rewind]]'s different sticker [[variant]]s]]
As the original line lost retail steam around the globe, cost-saving measures went into effect, and paper decals became more prevalent.

===Generation 2===
The first year of ''[[Transformers: Generation 2 (toyline)|Generation 2]]'' in both the US and Europe was almost wholly recycled molds, and stickers were still the norm.  As new-mold toys entered G2, some used foil stickers (i.e. the [[Color Changer]]s/[[Aquaspeeder]]s/[[Stormtrooper (G1)|Stormtrooper]]s, the [[Axelerator]]s and [[Skyscorcher]]s,) though others ([[Megatron (G1)/toys#Generation 2|tank Megatron]], the [[Lightformer]]s, [[Trakkon]]s and [[Obliterator]]s) kept with thick paper, albeit with stronger adhesive than the Japanese paper-decal toys just a few years prior.

[[File:AeroRaid-stickers.jpg|thumb|upright=1.1|You didn't buy this, and you certainly didn't apply this.]]

By the second year of G2, the apply-your-own separate sticker sheets vanished almost completely. Most toys still used factory-applied paper decals, but paint operations and tampographs became more and more commonplace. Even the recycled Generation 1 [[Aerialbot (G1)#Generation 2|Aerialbot]] and [[Combaticon (G1)#Generation 2|Combaticon]] toys lacked separate sticker sheets (as did the ultimately-unreleased [[Protectobot (G1)#Generation 2|Protectobots]] and [[Stunticon (G1)#Generation 2|Stunticons]]). By 1995, many toys had eschewed sticker detailing altogether.

The only late G2 exception to the "no separate sticker sheet" rule is [[Optimus Prime (G1)/toys#LaserOptimusPrime|Laser Optimus Prime]], 1995's big-ticket item, which also featured a lot of "random [[robot mode]] tech greeblies" sticker detailing that called back to the early days of the line. Japan also brought back separate sticker sheets, though in a much more low-key manner; their releases of the Autobot [[Cyberjet]]s each came with a separate transparent-plastic sheet full of extra detailing, including "battle damage" markings. It appears, however, that no instructions were given as to ''where'' on the toy these decals were supposed to go. 
{{-}}

===Beast Wars===
Starting in 1996, the rounded and organic sculpting of [[Beast Wars: Transformers (toyline)|''Beast Wars'' toys]] made even factory-applied stickers impractical. In the second year of ''Beast Wars'', the toys gained a very subtle sticker addition; the "[[rubsign|energon chip]]", a tiny, often-hidden heat-reactive sticker that would reveal the robot's allegiance, bringing back the classic "rubsign" [[gimmick]] from Generation 1. These stickers stuck (ha ha) with the line up through the third year, but were replaced by the snazzier-looking "[[spark crystal]]s" of the [[Transmetal 2|Transmetals 2]].

Stickers made a very brief comeback in the short 1997 ''[[Machine Wars: Transformers|Machine Wars]]'' series. The Basic-sized figures had factory-applied paper stickers, while the larger boxed toys retained apply-your-own paper sticker sheets.  These toys were all redecos of older G2 or "transitional" European toys, and in many cases their new sticker sheets yielded unimpressive or confusing results due to sticker sheets that no longer made sense with the new toy color schemes (i.e. putting a featureless white sticker onto a piece of white plastic of the same size and shape).  

In Japan, ''[[Beast Wars II (toyline)|Beast Wars II]]'' made ample use of molds developed for ''Generation 2'', resulting in a fair amount of factory-applied stickers on [[Megastorm#Toys|Megastorm]], [[Starscream (BWII)#Toys|Starscream]] and [[BB#Toys|BB]]. In 1999, ''[[Transformers: Beast Wars Metals|Metals]]'' [[Ravage (G1)/toys#Beast Wars Metals|Jaguar]] not only had a factory-applied sticker inside an opening chest compartment (revealing a [[Predacon (BW)|Predacon]] faction symbol), but also the first separate sticker sheet in a ''Transformers'' toy since 1995. This foil sticker sheet featured two replacement "viewscreen" images for the chest-sticker ([[Megatron (G1)|Generation 1 Megatron]]'s head, and the classic [[Decepticon]] insignia on a purple grid background) as well as two Predacon symbols and two Decepticon symbols to be placed on his biceps as you wish. Mind, due to the rounded biceps, they don't really stay on well. The [[redeco]] of this toy, [[BotCon 2001]]'s [[Tigatron#BC01|Transmetal Tigatron]], also had a similar decal sheet.

===Beyond the beasts===
Despite the general return to toys with more flat planes suitable for stickers once the [[Beast Era]] ended, for the most part they have been replaced by paint operations and tampographs. From this point forward, it is far quicker to name the individual toys that ''do'' have stickers than to list all the groups that ''don't''.

Most of these have come in the form of [[convention]]-[[exclusive]] toys or high-pricepoint pieces. Aside from the aforementioned [[BotCon 2001]] Tigatron, [[OTFCC 2003]]'s [[Sideswipe (G1)/toys#Universe|Sideswipe]] and [[Sunstreaker (G1)/toys#Universe|Sunstreaker]] had simple block-decals on their roofs to conceal some [[unpaintable plastic]]. [[BotCon 2007]] [[Thrust (G1)#Timelines|Thrust]] had small circular stickers applied to the tops of the screws in his new-mold wings, in order to hide them since they were ''supposed'' to be on the ''underside'', but an error placed them on top. 2011's [[Ramjet (G1)#Timelines|''Generation 2'' "Classics" style Ramjet]] uses factory-applied stickers to replicate a lot of the detailing from [[Ramjet (G1)#Generation 2|the original ''Generation 2'' Ramjet toy]]. [[BotCon 2016]] saw several sticker sheets released, for "TM3" Megatron, ''Combiner Wars'' Magnaboss, and TFSS Bluestreak.

Stickers used on toys released at "normal" retail are rare nowadays, but do happen from time to time.

The [[Transformers: Robots in Disguise (2001 toyline)|''Car Robots/Robots in Disguise'' toylines]] (beginning in 2000 in Japan) featured several pieces that were redecos of older toys and thus included some stickers. ''Car Robots'''s [[Mega-Octane|Dolrailer]] and [[Ruination (RID)|Baldigus]] had several factory-applied stickers (which were removed from the Hasbro versions of those toys, as did as both versions of [[Scourge (RID)|Black Convoy / Scourge]]. The [[Target]]-exclusive [[Dreadwind (RID)|Dreadwind]] and [[Smokejumper]] set also utilized a traditional peel-off sticker sheet.

2003's ''[[The Transformers: Masterpiece|Masterpiece]]'' [[Optimus Prime (G1)/toys#Masterpiece|Optimus Prime]] used stickers to put images on the flip-up "communications screens" on his forearms. In the same vein, the older-collector-oriented ''[[Transformers: Alternators|Alternators/Binaltech]]'' line (as well as its spin-offs) would see multiple uses of separate sticker sheets, though the overwhelming majority of them were from Japan. Later releases of [[Tracks (G1)#Alternators|the ''Binaltech'' blue Tracks]] came with an optional hood decal based on the [[Tracks (G1)#Toys|flame-deco of his original toy]]; this sheet was also included without changes (yes, even having Japanese text) with [[Swerve (G1)#Alternators|''Alternators'' Swerve]], making that rarely-spotted toy all the more desirable to collectors. [[Skids (G1)#Alternators|''Binaltech'' Skids]] lost the Hasbro version's flame tampographs, but toy came with a sticker sheet with the flames, a set of stripes resembling [[Skids (G1)#Toys|those from his original toy]] , as well as a Japanese "New Driver" badge for the window. His ''[[The Transformers: Binaltech Asterisk|Binaltech Asterisk]]'' redeco, [[Blaster (G1)#Binaltech Asterisk|Broadblast]], also came with a separate sheet of stickers, including the flames, but also decals to turn him into a "TBN" news-Scion. Finally, the ''[[Transformers: Kiss Players (toyline)|Kiss Players]]'' [[Autorooper#Toys|Autorooper]] came with a sticker sheet full of squad markings, enabling you to have your Autorooper be any of the 48 individual units from the story, not simply the one assigned to [[Atari Hitotonari]], his pack-in "partner". (It is unknown if anyone actually ''did'' assemble a full compliment of 48 Autoroopers. And if they did, what the hell they did with the other 47 Ataris. Though 48 [[Kremzeek]]s sound pretty awesome.)

Several of the [[Transformers (2007 toyline)|2007 movie's]] [[Real Gear Robot]]s have factory-applied stickers used for display images. These include [[Farsight T-20]], [[Hacker X-3]], [[Highline 1070]], [[Longview (Movie)|Longview]], [[Photon T-34]], [[Power Up VT6]], [[Speed Dial 800]], [[Spy Shot 6]], [[Wire Tap V20]], and [[Zoom Out 25X]]. The Real Gear Robots were originally designed for ''[[Transformers: Cybertron (toyline)|Cybertron]]'', and several of these displays feature images from that franchise.

In 2011, Hasbro [[rebranding|rebranded]] the [[Transformers (2010 toyline)|gold-packaging ''Transformers'' line]] as "[[Transformers (2010 toyline)#Hasbro Reveal the Shield subline|Reveal the Shield]]", bringing the heat-sensitive [[rubsign]]s back for another go, though this time rather than being squares, they were cut in the rough shape of the Autobot [[insignia]]. The brick-based ''[[Kre-O]]'' line from this year also made use of user-applied sticker sheets.

In 2012 to 2013, the TakaraTomy releases of the ''[[Transformers: Prime (toyline)|Prime]]'' toys dropped many (but not all) of the Hasbro releases' paint operations, replacing them with customer-applied stickers. Instead of the Hasbro weapons, these releases featured their own [[Arms Micron]] accessories, all of which also relied on stickers for detail.

In 2013, the TakaraTomy version ''Fall of Cybertron'' [[Vortex (FOC)|Vortex]] has a Decepticon sigil sticker.

In 2013, the massive ''[[Transformers: Generations (toyline)|Generations:]] [[Thrilling 30]]'' Titan Class [[Metroplex (G1)#Generations|Metroplex]] toy used over 100 customer-applied stickers for detail, presumably because doing all those details in [[Paint operation|paint]] would have skyrocketed the budget of this already-expensive figure.

In 2014, ''Generations: Thrilling 30'' [[Whirl (G1)|Whirl]] and [[Roadbuster (G1)|Roadbuster]] came with stickers too.

In 2015 to 2016, ''Combiner Wars'' [[Megatron (G1)/toys#Combiner Wars|Megatron]] had a small sticker sheet included with the figure. [[Menasor (G1)#Generations|Menasor]] and [[Superion (G1)#Generations|Superion]], [[Defensor (G1)#Generations|Defensor]] and [[Optimus Maximus (G1)|Optimus Maximus]], and [[Devastator (G1)#Generations|Devastator]] each had a sticker sheet exclusive to Hasbro Asia markets.

In 2015 to 2017, the entire ''Robots in Disguise'' toyline features faction symbol stickers called "Shields", which can be scanned with the accompanying Robots in Disguise app to temporarily unlock the toy for use in-game.

In 2016 to 2017, the ''Titans Return'' toyline features some factory-applied stickers for detailing (initially only on the Legends Class molds that turned into PDAs to decipt their screens, but starting from Wave 3 they became the norm for Voyager and Leader Class figures).  Titan Class [[Fortress Maximus (G1)/toys#Generations|Fortress Maximus]] and [[Trypticon (G1)#Generations|Trypticon]] had huge sticker sheets in a similar style to Titan Metroplex. Wave 1 and 2 Deluxe, Voyager, and Leader Class figures had a sticker sheet per wave exclusive to Hasbro Asia Markets.

In 2017 to 2018, the ''Power of the Primes'' toyline features once again factory-applied stickers for detailing on Voyager Class figures and up, in both the U.S. and Japan.  These stickers are particularly renowned for poor adhesive quality and being improperly applied over transformation hinges, causing near-unavoidable peeling and damage.  

In 2018, ''Legends'' G2 Megatron came with a small sticker sheet referencing the original Hero version.

===Modern Generation 1 reissues & redecos===
Reissues and redecoes of Generation 1 molds naturally retained their separate decal sheets, but as time went on, more and more began replacing factory-applied stickers with more durable tampographs. The most notable examples are in the reissues and redecoes of the [[Sideswipe (G1)/toys#Toys|original Sideswipe mold]]: the rally-deco headlamps on every use of the mold since the "New Year Special" release in 2002. The Takara ''[[The Transformers: Micromaster|Micromaster]]'' series (also begun in 2002) used nothing but paint operations for the five Micromaster six-teams, often leaving areas once covered by more complex-detail stickers blank and adding entirely new detailing to other areas. However, the final releases in the series, the "DX Micromaster" versions of [[Multiforce]], used factory-applied paper decals for their robot mode torso detailing.

==Pros and cons==
[[File:FullTilt1986.jpg|thumb|upright=1.3|left]]
A distinct advantage of stickers over paint in general is the ability to do much more intricately-detailed, multicolor detailing for a cheaper price. Many fans also enjoy the simple act of applying stickers, adding an almost personal touch to the toy upon ownership.

But, well... there are some disadvantages to them too. Okay, a lot of disadvantages.

Stickers are a common area for early wear-and-tear, as the designs can be abraded away, leaving ugly residue underneath. Some toys have stickers meant to be applied to areas all but guaranteed to destroy them by simply transforming the toy, one of the most notorious being the thigh stickers on the original [[The Transformers (toyline)|Generation 1]] [[Hot Rod (G1)/toys#Generation 1|Hot Rod]]. While the later [[Hot Rod (G1)/toys#Targetmaster|Targetmaster Hot Rod]] used smaller thigh decals, scraping was still a problem. Paper stickers can lose their clear-plastic top-layer, making the paper underneath ''much'' more vulnerable to damage, plus they are (obviously) more susceptible to water damage, so no tub-time play!

While the transparent-plastic decals are probably the most resilient to physical damage, they have their own problem, namely that even the color details tend to be semi-transparent, which can lead to the details getting lost should the sticker be applied to darker plastics. Also, any dirt that happens to get under the sticker becomes much more visible, and discoloring has been known to happen. Foil stickers have also been known to simply fade, losing their color details without the sticker below being scraped.

[[File:G1-toy Detritus.jpg|thumb|upright=1.3]]
Just how "sticky" a sticker is can also lead to problems, especially when taking into account the materials they're made of and the surfaces they're meant to cover. As noted above, the paper decals used on several toys in the ''[[Fight! Super Robot Lifeform Transformers (toyline)#1989 (Victory)|Victory]]'' line and beyond in Japan had notoriously weak adhesive, meaning stickers wouldn't stay on terribly well. This was especially problematic with stickers meant to bend around corners or rounded surfaces, as the thickness of the paper made them more likely to come off on one side. The 20044 [[e-HOBBY]] [[Detritus (G1)|Detritus]] toy (see right) suffered similar issues. Even foil stickers can have this problem, the most notorious example being the ridiculous "eye" sticker on the [[Seeker (body-type)#Generation 1|original "Seeker"-style jet mold]] that was supposed to go over the bridge of its nose, though several ''[[Diaclone]]'' molds wanted you to fold stickers at a 90-degree angle. [[Skids (G1)#Toys|The original Skids toy]] does that, plus has the problem of the instructions telling you to place circular stickers over the rounded screw-heads on his shoulders, which actually stick out ''beyond'' the background plastic of the shoulders! There's almost no way those are going to stay put, even if you never ever rotate his shoulders outward. Add in that his upper-thigh decals are much too easy to place in a way where they scrape against his crotch-plate when transforming, and you've got the triumvirate of Sticker Placement Annoyances.

[[File:SpringerG1Toy.JPG|thumb|left|upright=0.85|I demand to be called "Blinger" now.]]
And bringing back the "apply it yourself" angle, this often causes minor issues when buying old toys secondhand. More often than not, these stickers were applied without a lot of care by little kids, which mean stickers can end up misaligned or just flat-out in the wrong places. The sometimes-ambiguous instructions don't help.

[[File:DeathsaurusBadCutStickers.jpeg|thumb|right|upright|]]
Another unpleasant factor regarding stickers is the unpredictable quality of the cutting on the sticker sheet itself; some stickers can be left significantly asymmetrical, or with important features of the art left completely off the sticker.  G1 [[Snarl (G1)|Snarl]] takes that to a new level by having an Autobot symbol that is supposed to be placed in the middle of his dinosaur head... which splits in half in order to transform, necessitating owners either place the sticker asymmetrically on the toy, or cut it in half and apply each half themselves.  One complaint about stickers that pops up that is not really inherent to stickers themselves, but still worth noting, is their aesthetic value even when mint. Throughout Generation 1, much of the robot mode sticker detailing took the form of random multicolored "greeblies", with some more perplexing than others. While [[live-action film series|excessive amounts of tech detailing are not necessarily a bad thing]], some find them very incongruous with the simpler, blockier designs of the early toys, especially their rainbow of colors and occasionally odd stylistic choices, such as the reel-to-reel tape details on [[Hot Spot (G1)#Toys|Generation 1 Hot Spot's crotch]] (which makes the sticker featuring 5-inch [[floppy disk]] drives on [[Kup (G1)/toys#The Transformers|the original Kup toy]], a figure of an "old guy" character, all the funnier). Some fans prefer to omit certain stickers based on looks alone, particularly if leaving a spot bare could make the toy [[Show-accuracy|more closely resemble]] the [[Character model|animation model]].

All told, it's little wonder why stickers have fallen out of favor with [[Hasbro]] and [[TakaraTomy]], as well as most other toymakers. 
{{-}}

==Aftermarket replacements==
Aftermarket manufacturers have sprung up that supply reproduction stickers. Some are available that were designed and never used on the original toy; others are original designs supplied as [[customizing|improvements]], providing detail not previously found, to help make the toy more screen- or comic-accurate. Still other designs may allow a toy to be [[repurposing|repurposed]] as a different character, made to resemble a real-life vehicle on which its alt mode is based, improve flaws on official figures, or may add a novelty factor.


[[Category:Toys]]