Editing Misassembly

[[File:MegatronUltimateBattle.jpg|upright=1.2|thumb|Doomed to walk backwards, but oddly has become a much better dancer as a result.]]
'''Misassembly''' is what happens when something goes wrong in the production process and parts of a toy are assembled in a way other than their design intended. It can happen for a variety of reasons, but the result is that many or even ''all'' units of a given production run on a toy will contain some form of incorrect assembly.

The most common form of misassembly is the swapping of two similar parts from left to right, such as feet, forearms, door kibble etc., and/or having parts attached backwards.

Misassembled toys will often appear normal at first glance, having made it through the manufacture and packaging process including [[quality control]], either without anyone noticing or, if they did, without thinking it was a significant enough problem to warrant the trouble of making a mid-run correction.  Mistaken assemblies can create problems with [[articulation]] or [[transformation]], such as toys which can essentially transform but have parts that are difficult or impossible to click fully into place.

==Examples of widespread cases==
===Swapped parts===
[[File:Cybertron OptimusPrime deluxe toy.jpg|thumb|upright=1.3|[[JaAm|WhY mY ELboWs huRt]]]]
[[File:RANSACKvh1.jpg|thumb|upright=1.2|The way it was meant to be!]]
[[File:Classicstoy ultimate battle megatron.jpg|upright=1.67|thumb|[Fixed]]]
[[File:Human Alliance Bumblebee Prototype.jpg|thumb|upright=0.85|Don't try this at home, kids!]]
* ''[[Transformers: Universe (2003 toyline)|Universe]]'' [[Blackarachnia (BW)|Blackarachnia]]'s forearms
* ''Universe'' [[Battle in a Box]] two-pack [[Ultra Magnus (G1)/toys#Universe|Ultra Magnus]]'s forearms (error carried over onto the [[Optimus Prime (Armada)/toys|Optimus Prime]] [[redeco]] released as a mass-retail Deluxe Class toy for the ''[[Transformers: Cybertron (toyline)|Cybertron]]'' line, then fixed with a [[variant|running change]] version)
* ''Universe'' [[Repugnus (Universe)|Repugnus's]] beast mode mandibles (the same error is repeated on the [[BotCon 2005]] reuses of the sculpt.)
* ''[[Transformers Animated (toyline)|Animated]]'' [[Blitzwing (Animated)|Blitzwing]]'s upper arms
* ''[[Transformers: Energon (toyline)|Energon]]'' [[Storm Jet (Energon)|Storm Jet]] has his inside legs swapped so that the knee joint faces the wrong way. Furthermore, his shoulders are also misassembled, since there is a moulded chevron...in his armpit. The same error is repeated on every subsequent reuse of the sculpt, such as ''[[Transformers: Universe (2008 toyline)|Universe]]'' [[Silverbolt (G1)#Universe (2008)|Silverbolt]] and the [[rebranding|rebranded]] ''[[Transformers: Revenge of the Fallen (toyline)|Revenge of the Fallen]]'' [[Silverbolt (ROTF)#toys|Silverbolt]].
* ''Energon'' [[Steamhammer (Energon)|Steamhammer]] and his redeco, ''[[Transformers: Classics|Classics]]'' [[Scavenger (G1)|Scavenger]], have the treads in vehicle mode swapped. As a result, the small tabs on the sides of the treads that are supposed to peg into the holes in the gray flaps on the hips, thereby stabilizing the robot torso, are located on the sides of the head instead. Fortunately, the treads can be easily swapped using a screwdriver.<ref name="ooebi">[http://ooebihara.sakura.ne.jp/toys/TF/Slink/ex01/ex01.htm Ooebi's Hobby Factory gallery of Superlink Buildron]</ref> Hasbro's official [[stock photography|stock photos]] depict the treads correctly assembled, and the [[instructions]] show the tabs in the correct place in robot mode (oddly enough, the instructions imply that the tabs peg in less well than they do in reality).
* ''Cybertron'' [[Ransack (Cybertron)|Ransack's]] rear wheel struts (the same error is repeated on every subsequent reuse of the sculpt except for [[BotCon 2006]]'s [[Rattrap (BW)|Rattrap]].)
*''[[Transformers: Classics|Classics]]'' [[Mini-Con]] [[Grindor (Classics)|Grindor]] is odd: His official stock photos depict the wheels with the pegs as the rear wheels and the wheels with the corresponding holes as the front wheels. The toy itself has the wheels swapped, which is backed up by his [[instructions]]. His redeco, ''Universe'' [[Bodyblock (Universe)|Bodyblock]], features the wheel assembly from Grindor's stock photos, which contradicts his own instructions (which are recycled from Grindor). Since neither wheel assembly affects his functionality or transformation in any way whatsoever, it's unclear which one is supposed to be the "correct" assembly and which one is the "misassembly".
* [[Transformers: Classics|Classics]] Ultimate Battle [[Megatron (G1)/toys#Ultimate.2BBattle|Megatron's]] feet are swapped and put on backwards, resulting in them not folding up properly in his tank mode.
*''[[Transformers: Universe (2008 toyline)|Universe 2.0]]'' Mini-Con [[Makeshift (Universe)|Makeshift]]'s legs are swapped on the hips both on the actual toy and in official stock photos compared to his own instructions and the original iteration of the sculpt, ''[[Transformers: Classics|Classics]]'' [[Oil Slick (Classics)|Oil Slick]]. This results in the crotch section facing the wrong way in robot mode, with his sole [[Powerlinx]] socket facing forward and the sculpted crotch details facing backwards. Not only does this location of the Powerlinx port in robot mode result in [[anatomic euphemism|unfortunate implications]], it also makes the socket inaccessible in vehicle mode. This applies to the [[Kmart]] [[exclusive]] Mini-Con 12-pack release of the toy; at least some samples of the individually packaged version available at discount store chains like Big Lots! were assembled correctly.
* ''[[Transformers: Universe (2008 toyline)|Universe 2.0]]'''s [[Prowl (G1)/toys#Classic Series|Prowl]]/[[Bluestreak (G1)#Classic Series|Silverstreak]]/[[Smokescreen (G1)#Universe .282008.29|Smokescreen]] [[mould]] has most sliding feet assemblies swapped. The balance is far better when the feet are swapped, allowing for a more leveled hood-chest and reducing the depressed look they commonly sport.
* ''Revenge of the Fallen'' [[Human Alliance]] [[Bumblebee (Movie)/toys|Bumblebee's]] legs were supposedly swapped because the extra transformation step (rotating the legs and waist) would have been too difficult for kids to do. Although [[prototype]] photos seen via [[TakaraTomy]] show the legs with the wheels in a more [[show-accuracy|movie-accurate]] setup, the official [[Hasbro]] stock photos and the [[instructions]] show the "misassembly" as the "correct" assembly, thus making this (arguably) an intentional [[design change]] rather than a genuine misassembly.
* ''[[Transformers: Prime (toyline)|Prime:]] [[Beast Hunters]]'' Voyager Class [[Ultra Magnus (WFC)#Beast Hunters|Ultra Magnus]] has swapped leg panels, meaning that the pegs used to secure them in robot mode are on the wrong sides.
* The initial release of ''[[Triple Combination: Transformers Go! (toyline)|Go!]]'' [[Jinbu#Go.21|Jinbu]] toy suffers from swapped thighs, preventing him from bending his knees past 90 degrees, and from allowing his legs to be tabbed and secured properly in the "GoKenzan" combined mode.
* Initial shipments of ''[[Transformers: Generations|Generations]]'' [[Skids (G1)#Generations|Autobot Skids]]'s upper thighs are swapped, compromising the hip articulation. The issue was fixed in the [[Crosscut (Autobot)#Generations|Crosscut]] retool and later releases of Skids himself.
{{-}}

===Nonfunctioning/compromised gimmick===
* The blue lever at the base of ''[[Beast Wars: Transformers (toyline)|Beast Wars]]'' [[Transmetal 2]] [[Megatron (BW)|Megatron]]'s dragon-mode neck, which allows his neck to be moved around like a puppet, features a flip-down tab which is supposed to fit into a groove in the neck and lock it in its fully-extended position. The lever is attached backwards, however, and tab cannot meet groove, though this can be easily remedied by unscrewing the lever and reattaching in the proper orientation. This persisted with [[Cryotek (RID)|Cryotek]].
* [[Transmetal 2]] [[Megatron (BW)|Megatron]]'s neck posing gimmick is actually disabled from the gearbox being misassembled, reorienting the gears instead of the lever enables a classic dragon flight pose, and a straight arm for firing poses in robot mode.
* ''[[Transformers: Cybertron (toyline)|Cybertron]]'' [[Runamuck (Cybertron)|Runamuck]]'s punching gimmick.
* [[Transformers (film)|Movie]] [[Megatron (Movie)|Megatron]] features a spring in the forearm that was supposed to fire his chain-fist, but was instead installed in his fusion cannon arm, causing it to snap shut. Switching the spring from one arm to the other corrects the function of both gimmicks.

===Transformation-inhibiting errors===
* Voyager Class ''[[Transformers: Revenge of the Fallen (toyline)|Revenge of the Fallen]]'' [[Mixmaster (ROTF)|Mixmaster]] appears to have the joint that attaches the cab to the robot inverted, with the released toy having the cab joint upside-down as compared with what is in the instructions and box pictures, meaning that the toy cannot ''exactly'' mimic the battle mode that is depicted on the instructions or [[stock photography|stock photo]]s. This only applies to the Hasbro version of the instructions, however, as the Japanese Takara release had instructions depicting a completely different battle mode,<ref>[http://www.otca.com.au/boards/showpost.php?p=124022&postcount=13 Thread about Mixmaster's faulty instructions.]</ref> which utilised the joint in the direction it is assembled, as well as pegs and holes present on the rear wheel segments and the inside of the cab respectively. Unfortunately, the transformation instructions have since been removed from the Takara website. The 'impossible' battle mode was reprinted in the instructions for the Hasbro G1-styled redeco.

==Isolated incidents==
[[File:BTAltProwlMisassemblies.jpg|thumb|left|Just give me a call and we can swap parts...]]

Aside from these widespread misassemblies, there are also countless instances of isolated incidents where a single specimen of a toy, or at least very ''very'' low quantities, feature assembly errors. Chances are that every toy collector has encountered at least one of these over the years, and trying to compile a list is pretty much pointless considering their sheer ''variety'', as well as their (usually) low quantities.

A toy with an unusually large amount of reported errors, many of them of the really ''odd'' variety, was ''[[Transformers: Alternators|Alternators/Binaltech]]'' [[Prowl (G1)/toys|Prowl]]: One specimen of the ''Binaltech'' version sported the "Type S" rims of his ''Alternators'' counterpart on both his front wheels (but the correct "Type R" rims on his rear wheels); one specimen of the blue ''Binaltech'' version had the wrong set of fingers on one hand, resulting in an articulated ''pinky finger'' instead of the index finger. The most commonly reported error, however, was of the toy sporting two of the same hand. This error was apparently ''so'' common that it even showed up in ''two different sets of [[stock photography|stock photos]]'' (which also featured two of the same forearms, and one of them even two of the same ''shoulders'')!

Reportedly, some specimens of ''[[Transformers: Revenge of the Fallen (toyline)|Revenge of the Fallen]]'' [[Superion (ROTF)|Superion]] also came with a very unusual problem, where one of [[Silverbolt (ROTF)|Silverbolt's]] legs was assembled the wrong way (a widespread error, as noted above), but the other one was assembled ''correctly''.
{{-}}

==Solutions==
[[File:TFU08-toy Makeshift.jpg|thumb|upright=1.0|One of the easiest fixes ''ever''.]]
Many cases of misassembly can easily be fixed with the aid of a screwdriver and a modicum of judiciously applied pressure. Most Transformers include many parts that are held together with Phillips-head screws, which can generally be removed quite easily, allowing the misassembled pieces to be reversed, swapped out or otherwise re-aligned. Also, many toys from ''Beast Wars'' onwards feature [[ball joint]]s or similar that can usually be popped free and easily reconfigured. Examples include ''Animated'' Blitzwing, whose left-right swapped upper arms can be easily popped out of his shoulders and unscrewed from his forearms and then reassembled.

However, sometimes the assembly process involves adhesives or metal rods, which makes certain parts virtually impossible to separate without serious risk of damaging the toy permanently.  Also, toys involving electronic [[gimmick]]s can be particularly tricky to tinker with. All but those confident in their [[customizing]] skills should be wary of attempting such fixes.

Arguably, such fixes mean the toy is no longer in its "original" state, so extreme semanticists might argue that this counts as a form of customizing. But really, do we care?

In cases where individual specimens erroneously come with the wrong parts assembled (such as two of the same hand), there's the additional problem of finding someone who either has the same problem in reverse (i.e. two of the ''other'' hand) or a broken toy with the missing part intact (or at least someone selling a toy [[for parts]]). More often than not, however, you're better off returning the faulty toy to the store and getting a new one.
{{-}}

==Unusual cases==
In some cases, there is an evident problem where something doesn't quite work properly, but the [[stock photography]] and even elements of the [[deco]] would suggest that everything is in order. Although it is difficult to prove without official confirmation, cases like this may be due to a misassembly happening quite early in the design process, after the [[prototype]] phase but before finalising the deco, and thereafter being assumed to be correct at each subsequent stage of production.

[[File:TitaniumHero UltraMagnus.jpg|upright=1.15|thumb|Nature... or nurture?]]
An example of this is the [[Titanium Series]] series [[Ultra Magnus (G1)/toys|Ultra Magnus]], whose shoulder-mounted rocket launchers appear to have been been flipped horizontally, as their pegs cause them to attach top-down in robot mode. Although it is ''possible'' that some kind of mirror-flip occurred in the moulding of the launchers, an arguably more likely explanation notes that if the shoulders are simply swapped out they can attach correctly, suggesting instead a case of <strong class="selflink">misassembly</strong>. However, the fact that the shoulders feature Autobot-sigil [[tampograph]]s that would then be rendered visible only from the back would seem to argue against this, as does the packaging photography of the prototype. Conversely, the instructions depict the "correct" shoulder assembly as distinguished by showing frontwards the moulding detail that is backwards-facing on the toy as released.

Such a case ''could'' be an example of misassembly occurring very early in the process. The decision to "correct" the toy by swapping out the parts may make the accessories attach correctly, but at the cost of hiding some of the deco.

==Misassembly ''is not...''==
[[File:Ultimate Bumblebee toy.jpg|upright=1.4|thumb|I am not an animal! I AM A MECHY BEING!!]]
* Misassembly is not the same thing as toys which are incorrectly transformed in their packaging and/or [[stock photography|promotion photography]], such as "Ultimate" [[Bumblebee (Movie)/toys|Movie Bumblebee]] and his non-collapsed chest.
* Misassembly is not the same thing as a [[design change]], where the way parts were clearly intended to move, align or otherwise function has been altered in a manner which partly or fully compromises its optimal function, such as [[Lockdown (Animated)|Lockdown]]'s wrists, [[Bumblebee (Animated)|''Animated'' Bumblebee]]'s stingers, or [[Ratchet (Movie)|''Movie'' Ratchet]]'s thumbs. These changes can sometimes appear to be oversights or mistakes, but are in fact often done [[for safety reasons]]. Occasionally these issues are corrected in later re-uses of the mould, such as with ''Animated'' Bumblebee.
* Misassembly is not the same thing as a [[design flaw]], where a toy has been produced with parts that do not function as they were clearly intended, but are not the result of a deliberate design change. Manufacturing errors can result from pieces being manufactured fractionally too small or large, or subtly not quite the right shape, resulting in parts that don't move as intended, such as ''[[Transformers: Universe (2008 franchise)|Universe]]'' [[Ironhide (G1)/toys#Universe (2008)|Ironhide]]. Sometimes large numbers of units from a production run will have these problems while others from the same run will not, such as with [[Grimlock (Animated)#Toys|''Animated'' Grimlock]]'s partially-retracting leg/forearms.

{{toystub|pictures, more concrete examples}}

==Footnotes==
<references/>
[[Category:Toys]]