Peg
Many components and accessories of Transformers toys must have a way to temporarily attach to each other, and the means used must be simple, cheap, and easily detachable. Very often the chosen solution is a friction peg and peghole. Weapon handles and the fist holes they plug into are often made this way.
The peg, a fraction larger than the hole, deforms itself and the hole slightly as the two are pushed into engagement. Since all solids are somewhat elastic and act as springs if not overstressed, the peg and hole press against each other, causing friction that prevents the parts from slipping easily apart.
Transformers toys use several standard peg and hole sizes. In recent years, a 5-millimeter diameter has been particularly common, to allow for interchangeability of accessories between toys. The Mini-Con Powerlinx "hardpoints" of Armada and later lines are 5-millimeter pegs with a 2-millimeter hole drilled in the center; on "live" hardpoints, the hole has a tiny plastic "trigger" peg inside that activates a spring-loaded gimmick when pushed down by the peg within a Mini-Con's Powerlinx socket.
The 3mm post is becoming widespread through Cyberverse and smaller scale toys. This has allowed toys that previously were too small for accessories to now use them.
The term hardpoint, a military term for weapons mount, is sometimes used to describe pegs on Transformers. This can also refer to other types of connectors, such as C joints, but pegs are still the most common type.
{{#if: Child's Play Aron.jpg|90x72px |
{{#if: {{#if: |What's needed: |}}|{{#if: |What's needed: |}}|}}
|}} This toys & merchandise-related article is a stub. |
{{#ifeq: ||}}{{#ifeq: |File|}}