Cydraulic
From MediaWiki
Cydraulics are a catchall term for thermal hydraulic or hydrostatic lubrication systems which utilize an active cooling element to offset excessive heat build-up in due to mechanical stress.
Cydraulic lubrication systems play an obvious role in dispersing tribologic (friction-generated) heat generated at the point of mechanical contact. Conversely, the cooling in "thermal hydraulic" systems is not related to the mechanical force applied by the liquid; it's a means of managing managing waste heat generated by other systems by cooling the infrastructure itself... particularly in micro-gravity or vacuum environments where convection-dispersal cannot be counted on.[1]
Transformers with cydraulic systems
- Starscream (Movie) — cydraulic knees
- Ironhide (Movie) — cydraulic lubrication system, again for his knees
Notes
- Cydraulics is a real albeit obscure term used primarily as an emerging buzzword for certain high-performance metal presses and braking systems where the pressures involved cause heat to build-up at a rate faster than it would normally disperse. But prior to this article's creation(Jul-01-09), despite appearing as a sales term for a variety of recent industrial products, the term was not actually defined anywhere on the internet.
Well it is now.
References
- ↑ Heat rejection for all systems, open or closed, is a primary issue due to the constraints of weight and micro-gravity. The thermal hydraulic aspects of the systems must address the cooling of not only the reactor, but the power conversion and power conditioning equipment as well. — Technical Information Service, American Institute of Aeronautics and Astronautics
